Grasshopper Optimization Algorithm Research Articles

Optimization of off-grid hybrid renewable energy systems for cost-effective and reliable power supply in Gaita Selassie Ethiopia

This paper explores scenarios for powering rural areas in Gaita Selassie with renewable energy plants, aiming to reduce system costs by optimizing component numbers to meet energy demands. Various scenarios, such as combining solar photovoltaic (PV) with pumped hydro-energy storage (PHES), utilizing wind energy with PHES, and integrating a hybrid system of PV, wind, and PHES, have been evaluated based on diverse criteria, encompassing financial aspects and reliability. To achieve the results, meta-heuristics such as the Multiobjective Gray wolf optimization algorithm (MOGWO) and Multiobjective Grasshopper optimization algorithm (MOGOA) were applied using MATLAB software. Moreover, optimal component sizing has been investigated utilizing real-time assessment data and meteorological data from Gaita Sillasie, Ethiopia. Metaheuristic optimization techniques were employed to pinpoint the most favorable loss of power supply probability (LPSP) with the least cost of energy (COE) and total life cycle cost (TLCC) for the hybrid system, all while meeting operational requirements in various scenarios. The Multi-Objective Grey Wolf Optimization (MOGWO) technique outperformed the Multi-Objective Grasshopper Optimization Algorithm (MOGOA) in optimizing the problem, as suggested by the results. Furthermore, based on MOGWO findings, the hybrid solar PV-Wind-PHES system demonstrated the lowest COE (0.126€/kWh) and TLCC (€6,897,300), along with optimal satisfaction of the village's energy demand and LPSP value. In the PV-Wind-PHSS scenario, the TLCC and COE are 38%, 18%, 2%, and 1.5% lower than those for the Wind-PHS and PV-PHSS scenarios at LPSP 0%, according to MOGWO results. Overall, this research contributes valuable insights into the design and implementation of sustainable energy solutions for remote communities, paving the way for enhanced energy access and environmental sustainability.

Statistical pathways to low-carbon cities: Analyzing renewable integration, energy-efficient design, and job creation

To address the existing gap in understanding the intricate dynamics of resource management in Cloud Fog Computing (CFC)-driven Smart Grids (SG), this study introduces an innovative adaptive framework integrating Genetic Optimization Algorithm (GOA) and Cuckoo Search Optimization Algorithm (CSOA), aiming to optimize response times and enhance overall efficiency. In the domain of contemporary energy grids, the implementation of intelligent grids (IG) has ushered in a new era of dependable, streamlined, eco-friendly, and economically viable electric services. These grids constitute a fundamental facet of present-day energy resources. Moreover, the advent of cloud and mist computing (CMC) provides on-demand access to computational resources. Overcoming associated challenges, CMC not only delivers advantages like cost-effectiveness, energy conservation, scalability, flexibility, and adaptability but also presents an innovative model for resource management in IG. This study introduces a CMC-driven strategy for managing resources in IG by digitally replicating key grid components. The proposed framework aims to furnish diverse computational services for resource management within IG through a hierarchical arrangement of CMCs. Additionally, this investigation scrutinizes and simulates two optimization approaches: the cuckoo search and grasshopper optimization algorithms. These algorithms operate on an adaptive machine learning mechanism designed to balance the load, and the study meticulously compares their efficacy. These algorithms operate on an adaptive machine learning mechanism designed to balance the load, and the study meticulously compares their efficacy in the context of Renewable Integration, Energy-Efficient Design, and Job Creation.

A Review On Early Detection Of Chronic Kidney Disease

Early detection of Chronic Kidney Disease (CKD) is critical for timely intervention and effective treatment. Deep learning algorithms have demonstrated promise in medical applications, including disease detection. In this study, we propose a deep learning-based system for early CKD detection using the Chronic Kidney Disease dataset from Kaggle. Additionally, we incorporate the Grasshopper Optimization Algorithm (GOA) for feature selection to enhance the system's performance and interpretability. Our system employs a convolutional neural network (CNN) architecture to analyze clinical and laboratory attributes from the CKD dataset, obtained from Kaggle, consisting of 4,000 instances with 25 attributes. These attributes encompass patient demographics, blood tests, and medical history, providing a comprehensive representation of CKD-related factors. To improve the system's performance, we integrate the GOA for feature selection. The GOA is a nature-inspired metaheuristic optimization algorithm that mimics the foraging behavior of grasshoppers. It aims to identify the most relevant attributes associated with CKD from the dataset. By selecting a subset of informative features, we enhance the model's predictive accuracy and reduce overfitting. During the training phase, the CNN learns to automatically extract relevant features and patterns associated with CKD from the selected attributes. Additionally, data preprocessing techniques such as normalization and feature scaling are applied to further improve the model's performance and generalizability. To evaluate the system's performance, we conduct experiments using a separate test dataset comprising 1,000 instances from the CKD dataset. The incorporation of the GOA for feature selection in our deep learning system not only improves its performance but also enhances interpretability. By identifying the most relevant attributes associated with CKD, we focus on key biomarkers and risk factors, enhancing the system's accuracy and providing valuable insights into the disease. Our research showcases the potential of deep learning algorithms, coupled with GOA-based feature selection, for early CKD detection. By leveraging the Kaggle CKD dataset and incorporating the GOA, we contribute to improving the accuracy and applicability of the system in real-world clinical settings. To handle Big data we are proposing to implement this problem on Pyspark one of the Big data computational environments for effective learning. In this platform, we can dynamically scale the infrastructure as per the demand of the data. Ultimately, our work aims to advance the early detection and management of CKD, leading to improved patient outcomes and more effective healthcare interventions.

Efficient customer behaviour prediction in Indian metropolitan cities for E‐commerce applications

AbstractThe primary objective of this manuscript is to find the service quality factors, which influence customer satisfaction, promotional efforts taken by the retailer, and the perception of customers towards the organized retail sector. This investigation uses both offline and online retail sales datasets. Particularly, in the case of the offline retail sale dataset, an energy‐efficient analysis is conducted to collect scalable, accurate, and real‐time data. The collected data is used in enhancing several aspects of e‐commerce operations, including customer experience optimization and inventory management, which results in better decision‐making with increased efficiency. After data collection, the outliers are eliminated by implementing the z‐score technique. The removal of outliers increases the variability of collected data which reduces statistical power. The statistically sufficient data are given to the Randomized Grasshopper Optimization Algorithm (RGOA) for optimal instance selection. Finally, the selected optimal instances are given to the deep neural network (DNN) model for future customer behaviour prediction. The efficacy of the RGOA‐DNN model is analysed by using evaluation measures like mean squared error (MSE), root mean squared error (RMSE), mean absolute error (MAE), mean percentage error (MPE) and mean absolute percentage error (MAPE). The numerical analysis states that the RGOA‐DNN model obtained a minimal error rate with MSE of 0.09 and 0.10, RMSE of 0.13 and 0.14, MAE of 0.12 and 0.16, MPE of 0.10 and 0.11 and MAPE of 0.08 and 0.10 on the offline and online retail sales datasets. The RGOA‐DNN model has a minimal error rate in future customer behaviour prediction related to the conventional regression models. Furthermore, the elimination of inactive instances or selection of optimal instances reduces the model complexity to linear and computational time to 22.10 and 23.12 s on the offline and online retail sales datasets.

Application of Dandelion Optimization Algorithm in Pattern Synthesis of Linear Antenna Arrays

This paper introduces an application of the dandelion optimization (DO) algorithm in antenna arrays. This is the first time that the DO algorithm has been used for optimizing antenna arrays. For antenna array optimization, sidelobe level (SLL) and deep nulls are key technical indicators. A lower SLL can improve the signal-to-noise ratio and reduce the impact of clutter signals outside the main beam. Deep nulls need to be aligned with the direction of interference to eliminate the influence of interference sources. The combination of the two can effectively improve the anti-interference ability of the entire system. Therefore, antenna arrays with ultra-low sidelobes and ultra-deep nulls are currently hot in the field of antenna array design and are also some of the key technologies needed to achieve modern high-performance radar systems. As a new type of evolutionary algorithm inspired by nature, the DO algorithm is inspired by the wind propagation behavior of dandelions in nature. This algorithm iteratively updates the population from three stages of ascent, descent, and landing, ultimately finding the optimal position. It has good optimization ability in solving complex problems such as those involving nonlinearity, discreteness, and non-convexity, and the antenna array pattern synthesis optimization problem belongs to multivariate nonlinear problems. Therefore, the DO algorithm can be effectively applied in the field of antenna array optimization. In this work, we use the following method to obtain an optimized pattern of a linear array with the lowest sidelobe level (SLL), null placement in particular directions, and a lower notch in particular directions: by controlling the antenna array’s element spacing and leaving the phase unchanged to optimize the current amplitudes and by controlling the excitation current and phase fixation of the antenna array and changing the element spacing. In the first and second examples, different algorithms are used to reduce the SLL of the antenna. In the first example, the DO algorithm reduces the SLL to −33.37 dB, which is 2.67 dB, 2.67 dB, 3.77 dB, 2.74 dB, and 2.52 dB lower than five other algorithms. In the second example, the SLL optimized by the DO algorithm is −42.56 dB, which is 5.04 dB and 1.48 dB lower than two other algorithms. In both examples, the DO algorithm reduces the SLL lower than other algorithms when the main lobe of the antenna is not significantly widened. Examples 3, 4, and 5 use the DO algorithm to optimize the amplitude of the current, generating deep nulls and deep notches in specific directions. In Example 3, the DO algorithm obtains a depth of nulls equal to −187.6 dB, which is 66.7 dB and 44.3 dB lower than that of the flower pollination algorithm (FPA) and the chaotic colony predation algorithm (CCPA), respectively. In Example 4, the deep null obtained by the DO algorithm is as low as −98.69 dB, which is 6.67 dB lower than the deep null obtained by the grey wolf optimization (GWO) algorithm. In Example 5, the deep notch obtained by the DO algorithm is as low as −63.1 dB, which is 6.4 dB and 1.9 dB lower than the spider monkey optimization (SMO) algorithm and the grasshopper optimization algorithm (GOA), respectively. The data prove that the DO algorithm produces deeper nulls and notches than other algorithms. The last two examples involve reducing sidelobe levels and generating deep nulls by optimizing the spacing between elements. In Example 5, the SLL obtained using the DO algorithm is −22.8766 dB, which is 0.1998 dB lower than the lowest SLL of −22.6768 dB among other algorithms. In Example 6, the SLL obtained using the DO algorithm is −20.1012 dB, and the null depth is −125.1 dB, which is 1.592 dB lower than the SLL obtained by the cat swarm optimization (CSO) algorithm and 19.1 dB lower than the deep null obtained by the GWO algorithm, respectively. In summary, the results of six simulation experiments indicate that the DO algorithm has better optimization ability in linear array optimization than other evolutionary algorithms

Dynamic simulation and projection of ESV changes in arid regions caused by urban growth under climate change scenarios.

Spatial simulation and projection of ecosystem services value (ESV) changes caused by urban growth are important for sustainable development in arid regions. We developed a new model of cellular automata based grasshopper optimization algorithm (named GOA-CA) for simulating urban growth patterns and assessing the impacts of urban growth on ESV changes under climate change scenarios. The results show that GOA-CA yielded overall accuracy exceeding 98%, and FOM for 2010 and 2020 were 43.2% and 38.1%, respectively, indicating the effectiveness of the model. The prairie lost the highest economic ESVs (192 million USD) and the coniferous yielded the largest economic ESV increase (292 million USD) during 2000-2020. Using climate change scenarios as urban future land use demands, we projected three scenarios of the urban growth of Urumqi for 2050 and their impacts on ESV. Our model can be easily applied to simulating urban development, analyzing its impact on ESV and projecting future scenarios in global arid regions.

A hybrid Grasshopper optimization algorithm for skin lesion segmentation and melanoma classification using deep learning

Skin cancer can be detected through visual examination and confirmed through dermoscopic analysis and various diagnostic tests. This is because visual observation enables early detection of unique skin images by artificial intelligence. Promising outcomes are shown by several Convolution Neural Network (CNN)–based skin lesion classification systems that employ tagged skin images. This study suggests a practical approach for identifying skin cancers using dermoscopy pictures, improving specialists' ability to distinguish benign from malignant tumors. The Swarm Intelligence (SI) approach used dermoscopy photographs to locate lesions on the skin areas Region of interest (ROI). The Grasshopper Optimization technique produced the best segmentation outcomes. The Speed-Up Robust Features (SURF) approach is applied to extract features based on these findings. Two groups were created using the ISIC-2017, ISIC-2018, and PH-2 databases to categorize skin tumors. With an estimated accuracy in classification of 98.52%, preciseness of 96.73%, and Matthews Correlation Coefficient (MCC) of 97.04%, the suggested classification and segmentation methodologies have been evaluated for classification efficacy, specificity, sensitivity, F-measure, preciseness, the MCC, the dice coefficient, and Jaccard's index. In every performance indicator, the method we suggest outperformed state-of-the-art methods.

Optimal Placement of Superconducting Magnetic Energy Storages in a Distribution Network with Embedded Wind Power Generation

The prevalence of distributed generation in most power grids can negatively affect their performance in terms of power loss, voltage deviation, and voltage stability. Superconducting Magnetic Energy Storages (SMESs) can help in addressing this problem as long as they are optimally placed in the distribution network. This paper presents a hybrid Grasshopper Optimization Algorithm and a Simulated Annealing (GOA-SA) method to determine the optimal placement of SMESs in a distribution network with an embedded wind power generation system. The optimization was formulated as a multi-objective problem to minimize active power losses, reactive power losses, and voltage deviation and maximize the voltage stability index. An IEEE 57-node distribution network was employed and simulations were performed using MATLAB R2020b. Based on simulations using 200 kW SMESs in discharge mode, the active power loss decreased by 82.57%, the reactive power loss decreased by 80.71%, the average voltage deviation index decreased by 66.91%, and the voltage stability index improved by 34.97%. In the charging operation mode, the active power loss increased by 24.86%, the reactive power loss increased by 8.21%, the average voltage deviation increased by 12.86%, and the voltage stability index increased by 12.79%. These results show that SMESs can improve the technical performance of a distribution network.

Experimental and meta-heuristic optimization for the highest thermo-hydraulic performance of a solar air heater with a V-notch pattern of hemispherical protrusions on absorber surfaces

Thermo-hydraulic performances of a new solar air heater with single V-notch patterns of hemispherical protrusions on the absorber plate are investigated experimentally for different relative protrusion heights (hp/Dh = 0.027–0.069), relative pitch (pp/hp = 6–14), attack angle (αap = 15°-75°), and Reynolds number (Re =3600–21,700). Three meta-heuristic algorithms, i.e., Ant colony optimization (ACO), Whale optimization algorithm (WOA), and Grass-hopper optimization algorithm (GOA), were used for single and multi-objective optimizations. Experimental results provide the maximum Nusselt number (Nu) as 127.07 at hp/Dh = 0.050, pp/hp = 10, αap = 600, and Re =21,700, whereas the minimum friction factor (f) becomes 0.0165 at hp/Dh = 0.027, pp/hp = 10, αap = 450, and Re =21,700. The highest normalized Nusselt number (Nu/Nus) is found to be 2.56 for hp/Dh = 0.050, pp/hp = 10, αap = 600, and Re =7200, and the maximum normalized friction factor (f/fs) is observed as 4.30 at hp/Dh = 0.050, pp/hp = 10, αap = 450, and Re =7200. The highest thermo-hydraulic performance parameter (THPP) was to be 1.60 at pp/hp = 10, hp/Dh = 0.050, αap = 600, and Re =7200. Empirical correlations were developed. In single objective optimization for Nu, WOA provided the best results. For f, WOA gives a minimum value. The WOA metaheuristic algorithm outperformed the other algorithms.

Solution to uncertainty of renewable energy sources and peak hour demand in smart grid system

Today's need for environmental sustainability prompted the smart grid to incorporate more renewable energy sources. Reducing the operational costs of power generation and emission dispatch can both be accomplished with the integration of renewable energy sources. A power system is made to manage the fluctuating nature of loads for a brief time, nevertheless. However, new difficulties arise for utilities as a result of the fluctuation and uncertainty associated with renewable sources. Another problem faced by generating plants is network reliability issues arising from the peak hour's power demand in the power system. Application of demand response technology with the help of smart meters connected at consumers' end in smart cities can help to ease the enormous peak-hour pressure on power generating units. But a hybrid power system integrated with a storage system faces the challenge of optimal utilization of the battery under uncertainties caused by intermittent generation of power and dynamic demand. This research work proposes a real-time price based hidden Markov model and an enhanced demand response technique to solve these issues in a hybrid power system. Proposed model is tested on IEEE 30-bus system with/without renewable energy sources and implemented grasshopper optimization algorithm for optimal scheduling of generating units.

BGOA-TVG: Binary Grasshopper Optimization Algorithm with Time-Varying Gaussian Transfer Functions for Feature Selection.

Feature selection aims to select crucial features to improve classification accuracy in machine learning and data mining. In this paper, a new binary grasshopper optimization algorithm using time-varying Gaussian transfer functions (BGOA-TVG) is proposed for feature selection. Compared with the traditional S-shaped and V-shaped transfer functions, the proposed Gaussian time-varying transfer functions have the characteristics of a fast convergence speed and a strong global search capability to convert a continuous search space to a binary one. The BGOA-TVG is tested and compared to S-shaped and V-shaped binary grasshopper optimization algorithms and five state-of-the-art swarm intelligence algorithms for feature selection. The experimental results show that the BGOA-TVG has better performance in UCI, DEAP, and EPILEPSY datasets for feature selection.

Improved Binary Meerkat Optimization Algorithm for efficient feature selection of supervised learning classification

Feature selection (FS) is a crucial step in machine learning and data mining projects. It aims to remove redundant and uncorrelated features, thus improving the accuracy of models. However, it can be challenging to select the optimal features, especially for datasets with many features. This paper proposes the Binary Meerkat Optimization Algorithm (BMOA) to address the issue of FS. The BMOA selects the most related and useful features. Additionally, an improved BMOA (IBMOA) is introduced, which enhances exploration and exploitation capabilities by incorporating the Periodic Mode Boundary Handling (PMBH) strategy and the Local Search (LS) process. This helps to reduce dimensionality and enhance classification accuracy. To evaluate the significance of selected features, two widely used classifiers, namely k-nearest Neighbor (k-NN) and Support Vector Machine (SVM), were used as quality raters. The proposed IBMOA and the original BMOA were compared on 21 multi-scale and multi-faceted benchmark datasets. The binary structures of eight contemporary algorithms, including Binary Artificial Bee Colony (BABC), Binary Grey Wolf Optimization (BGWO), Binary Sailfish Optimizer (BSFO), Binary Particle Swarm Optimizer (BPSO), Binary Bird Swarm Algorithm (BBSA), Binary Whale Optimization Algorithm (BWOA), Binary Grasshopper Optimization Algorithm (BGOA), and Binary Bat Algorithm (BBA), were also analyzed and compared. The proposed IBMOA algorithm outperforms competitors on small and large datasets, obtaining optimal solutions within a reasonable timeframe. This is true for the proposed IBMOA, which has been statistically proven to be highly competitive using the Wilcoxon rank sum test (with alpha=0.05).

Experimental study on modified GOA-MPPT for PV system under mismatch conditions

This paper presents a modified grasshopper optimization algorithm (GOA) tailored for optimizing the power extraction capability of a solar photovoltaic (PV) system. The algorithm`s focus is on addressing one of the issues associated with mismatch loss (MML), particularly the mismatch (MM) in solar irradiance conditions, to attain maximum output power. The core strategy of the GOA involves optimizing the duty cycles of the converter to achieve the maximum power point (MPP) for the PV system. The PV system configuration comprises three PV modules connected in series and a SEPIC converter. To facilitate efficient maximum power point tracking (MPPT), the paper proposes using the GOA as a controlling mechanism. The study employs a comparative approach, contrasting the performance of the proposed system against established algorithms, such as PSO and GWO. The results of these evaluations exhibit the superior performance of the proposed GOA when compared to other optimization techniques. The GOA exhibits exceptional MPPT tracking characteristics, characterized by rapid tracking speed, heightened efficiency, and minimal oscillations within the PV system. Consequently, the GOA effectively addresses one of the MML issues.

Load frequency control in Island micro-grid with electric vehicles and renewable energy sources using modified fractional order PID controller

This paper presents a modified fractional-order proportional-integral-differential (MFOPID) controller for load frequency control in an Island microgrid based on an electric vehicle (EV) and renewable energy source. It tackles the intermittent energy sources and the dynamic of the load change with reduced speed and the quality of response generated on the microgrid. The MFOPID controller gains are well turned using a metaheuristic grasshopper optimization algorithm (GOA) technique to determine its robustness and optimal system performance. The controller gains are evaluated with three different searching agent populations. The proposed MFOPID with GOA improved system performance frequency by 19.485 Hz compared to 14.1151 Hz of the benchmark model. It takes 6.9068 s of the proposed model to settle compared to 16.6796 s of FOPID.

Brain tumor recognition by an optimized deep network utilizing ammended grasshopper optimization

Brain tumors are abnormal cell masses that can get originated in the brain spread from other organs. They can be categorized as either malignant (cancerous) or benign (noncancerous), and their growth rates and locations can impact the functioning of the nerve system. The timely detection of brain tumors is crucial for effective treatment and prognosis. In this study, a new approach has been proposed for diagnosing brain tumors using deep learning and a meta-heuristic algorithm. The method involves three main steps: (1) extracting features from brain MRI images using AlexNet, (2) reducing the complexity of AlexNet by employing an Extreme Learning Machine (ELM) network as a classification layer, and (3) fine-tuning the parameters of the ELM network using an Amended Grasshopper Optimization Algorithm (AGOA). The performance of the method has been evaluated on a publicly available dataset consisting of 20 patients with newly diagnosed glioblastoma that is compared with several state-of-the-art techniques. Experimental results demonstrate that the method achieves the highest accuracy, precision, specificity, F1-score, sensitivity, and MCC with values of 0.96, 0.94, 0.96, 0.96, 0.94, and 0.90, respectively. Furthermore, the robustness and stability of the method have been illustrated when subjected to different levels of noise and image resolutions. The proposed approach offers a rapid, accurate, and dependable diagnosis of brain tumors and holds potential for application in other medical image analysis tasks.

A modified shuffled frog leaping algorithm with inertia weight

The shuffled frog leaping algorithm (SFLA) is a promising metaheuristic bionics algorithm, which has been designed by the shuffled complex evolution and the particle swarm optimization (PSO) framework. However, it is easily trapped into local optimum and has the low optimization accuracy when it is used to optimize complex engineering problems. To overcome the shortcomings, a novel modified shuffled frog leaping algorithm (MSFLA) with inertia weight is proposed in this paper. To extend the scope of the direction and length of the updated worst frog (vector) of the original SFLA, the inertia weight α was introduced and its meaning and range of the new parameters are fully explained. Then the convergence of the MSFLA is deeply analyzed and proved theoretically by a new dynamic equation formed by Z-transform. Finally, we have compared the solution of the 7 benchmark functions with the original SFLA, other improved SFLAs, genetic algorithm, PSO, artificial bee colony algorithm, and the grasshopper optimization algorithm with invasive weed optimization. The testing results showed that the modified algorithms can effectively improve the solution accuracy and convergence property, and exhibited an excellent ability of global optimization in high-dimensional space and complex function problems.

A roommate problem and room allocation in dormitories using mathematical modeling and multi-attribute decision-making techniques

Purpose In recent decades, the student population in dormitories has increased notably, primarily attributed to the growing number of international students. Dormitories serve as pivotal environments for student development. The coordination and compatibility among students can significantly influence their overall success. This study aims to introduce an innovative method for roommate selection and room allocation within dormitory settings. Design/methodology/approach In this study, initially, using multi-attribute decision-making methods including the Bayesian best-worst method and weighted aggregated sum product assessment, the incompatibility rate among pairs of students is calculated. Subsequently, using a linear mathematical model, roommates are selected and allocated to dormitory rooms pursuing the twin objectives of minimizing the total incompatibility rate and costs. Finally, the grasshopper optimization algorithm is applied to solve large-sized instances. Findings The results demonstrate the effectiveness of the proposed method in comparison to two common alternatives, i.e. random allocation and preference-based allocation. Moreover, the proposed method’s applicability extends beyond its current context, making it suitable for addressing various matching problems, including crew pairing and classmate pairing. Originality/value This novel method for roommate selection and room allocation enhances decision-making for optimal dormitory arrangements. Inspired by a real-world problem faced by the authors, this study strives to offer a robust solution to this problem.

An efficient energy management scheme using rule-based swarm intelligence approach to support pulsed load via solar-powered battery-ultracapacitor hybrid energy system

This work presents an energy management scheme (EMS) based on a rule-based grasshopper optimization algorithm (RB-GOA) for a solar-powered battery-ultracapacitor hybrid system. The main objective is to efficiently meet pulsed load (PL) demands and extract maximum energy from the photovoltaic (PV) array. The proposed approach establishes a simple IF-THEN set of rules to define the search space, including PV, battery bank (BB), and ultracapacitor (UC) constraints. GOA then dynamically allocates power shares among PV, BB, and UC to meet PL demand based on these rules and search space. A comprehensive study is conducted to evaluate and compare the performance of the proposed technique with other well-known swarm intelligence techniques (SITs) such as the cuckoo search algorithm (CSA), gray wolf optimization (GWO), and salp swarm algorithm (SSA). Evaluation is carried out for various cases, including PV alone without any energy storage device, variable PV with a constant load, variable PV with PL cases, and PV with maximum power point tracking (MPPT). Comparative analysis shows that the proposed technique outperforms the other SITs in terms of reducing power surges caused by PV power or load transition, oscillation mitigation, and MPP tracking. Specifically, for the variable PV with constant load case, it reduces the power surge by 26%, 22%, and 8% compared to CSA, GWO, and SSA, respectively. It also mitigates oscillations twice as fast as CSA and GWO and more than three times as fast as SSA. Moreover, it reduces the power surge by 9 times compared to CSA and GWO and by 6 times compared to SSA in variable PV with the PL case. Furthermore, its MPP tracking speed is approximately 29% to 61% faster than its counterparts, regardless of weather conditions. The results demonstrate that the proposed EMS is superior to other SITs in keeping a stable output across PL demand, reducing power surges, and minimizing oscillations while maximizing the usage of PV energy.

Hybrid intelligent technique for intrusion detection in cyber physical systems with improved feature set

Machine learning techniques commonly used for intrusion detection systems (IDSs face challenges due to inappropriate features and class imbalance. A novel IDS comprises four stages: Pre-processing, Feature Extraction, Feature Selection, and Detection. Initial pre-processing balances input data using an improved technique. Features (statistical, entropy, correlation, information gain) are extracted, and optimal ones selected using Improved chi-square. Intrusion detection is performed by a hybrid model combining Bi-GRU and CNN classifiers, with optimized weight parameters using SI-BMO. The outputs from both classifiers are averaged for the result. The SI-BMO-based IDS is compared with conventional techniques Blue Monkey Optimization (BMO), Grasshopper Optimization Algorithm (GOA), Deer Hunting Optimization (DHO), Poor Rich Optimization (PRO), Long Short-Term Memory (LSTM), Support Vector Machine (SVM), Gated Recurrent Unit (GRU), Recurrent Neural Network (RNN) for performance evaluation.

Solving the spatial extrapolation problem in flood susceptibility using hybrid machine learning, remote sensing, and GIS.

Floods are arguably the most impactful of natural hazards. The increasing magnitude of their effects on the environment, human life, and economic activities calls for improved management of water resources. Flood susceptibility modeling has been used around the world to reduce the damage caused by flooding, although the extrapolation problem still presents a significant challenge. This study develops a machine learning (ML) model utilizing deep neural network (DNN) and optimization algorithms, namely earthworm optimization algorithm (EOA), wildebeest herd optimization (WHO), biogeography-based optimization (BBO), satin bowerbird optimizer (SBO), grasshopper optimization algorithm (GOA), and particle swarm optimization (PSO), to solve the extrapolation problem in the construction of flood susceptibility models. Quang Nam Province was chosen as a case study as it is subject to the significant impact of intense flooding, and Nghe An Province was selected as the region for extrapolation of the flood susceptibility model. Root mean square error (RMSE), receiver operating characteristic (ROC), the area under the ROC curve (AUC), and accuracy (ACC) were applied to assess and compare the fit of each of the models. The results indicated that the models in this study are a good fit in establishing flood susceptibility maps, all with AUC > 0.9. The deep neural network (DNN)-BBO model enjoyed the best results (AUC = 0.99), followed by DNN-WHO (AUC = 0.99), DNN-SBO (AUC = 0.98), DNN-EOA (AUC = 0.96), DNN-GOA (AUC = 0.95), and finally, DNN-PSO (AUC = 0.92). In addition, the models successfully solved the extrapolation problem. These new models can modify their behavior to evaluate flood susceptibility in different regions of the world. The models in this study distribute a first point of reference for debate on the solution to the extrapolation problem, which can support urban planners and other decision-makers in other coastal regions in Vietnam and other countries.