Graphene Fibers Research Articles

Rapid Fabrication of Graphene Fibers and Fiber-Based Thermistors for Wearable Devices

Rapid Fabrication of Graphene Fibers and Fiber-Based Thermistors for Wearable Devices

Band gap engineering of ADG/NiO nanocomposite and applications for photocatalytic reduction of nitrogen and photo-oxidation of dyes

The use of solar-driven semiconductor photocatalysis to solve energy and environmental issues is an intriguing and difficult subject. As a consequence, various types of photocatalysts have been developed subsequently to fulfill the requirements of photocatalysis.Since graphene was discovered, materials based on graphene have garnered considerable interest. The aloe-vera derived (ADG)/nickel oxide (NiO) nanocomposite is a notable example of a graphene derivative.The uniform structure of graphene fibre is altered by nickel oxide(NiO) which tunes its band gap and causes electronic arrangements within graphene that is requiste for photocatalysis. Herein, we have used a one-pot chemical approach to design aloe vera-derived graphene/nickel oxide nanocomposites (ADG/NiO), a novel photocatalyst that show high molar absorbance, suitable band gap of 2.68 eV, good photo-stability and reusability. Under solar light irradiation, the ADG/NiO nanocomposite exhibited remarkable photocatalytic activity. It effectively fixed nitrogen into ammonia with an apparent quantum efficiency(AQE) of 0.64% and efficiently photo-oxidized dyes. Specifically, it achieved a dye removal efficiency of 94.2% for methylene blue (MB) and 86.41% for Eosin-B, converting them into harmless inorganic species like CO2 and H2O within just 90 minutes. The cost-effective ADG/NiO nanocomposite shows significant potential as a photocatalyst activated by solar light for practical applications such as the selective generation of NH3 and the purification of industrial wastewater containing dyes.

Kinetic investigation of the energy storage process in graphene fiber supercapacitors: Unraveling mechanisms, fabrications, property manipulation, and wearable applications

AbstractGraphene fiber supercapacitors (GFSCs) have garnered significant attention due to their exceptional features, including high power density, rapid charge/discharge rates, prolonged cycling durability, and versatile weaving capabilities. Nevertheless, inherent challenges in graphene fibers (GFs), particularly the restricted ion‐accessible specific surface area (SSA) and sluggish ion transport kinetics, hinder the achievement of optimal capacitance and rate performance. Despite existing reviews on GFSCs, a notable gap exists in thoroughly exploring the kinetics governing the energy storage process in GFSCs. This review aims to address this gap by thoroughly analyzing the energy storage mechanism, fabrication methodologies, property manipulation, and wearable applications of GFSCs. Through theoretical analysis of the energy storage process, specific parameters in advanced GF fabrication methodologies are carefully summarized, which can be used to modulate nano/micro‐structures, thereby enhancing energy storage kinetics. In particular, enhanced ion storage is realized by creating more ion‐accessible SSA and introducing extra‐capacitive components, while accelerated ion transport is achieved by shortening the transport channel length and improving the accessibility of electrolyte ions. Building on the established structure–property relationship, several critical strategies for constructing optimal surface and structure profiles of GF electrodes are summarized. Capitalizing on the exceptional flexibility and wearability of GFSCs, the review further underscores their potential as foundational elements for constructing multifunctional e‐textiles using conventional textile technologies. In conclusion, this review provides insights into current challenges and suggests potential research directions for GFSCs.

Effect of laser ablation on mechanical performance of graphene-filled glass fibre reinforced polymer repaired composites

Abstract This paper aims to investigate the effect of laser ablation on the mechanical performance of graphene-filled glass fibre reinforced polymer (GFRP) repaired lap joints. The performance characteristics of repaired laminates were measured in terms of surface roughness, tensile strength and flexural strength according to ASTM standards. While the surface morphology was examined using a confocal microscope, scanning electron microscopy was adopted to analyse the laser ablated fibre–matrix interface. The average surface roughness significantly increased with an increase in laser power from 4 to 10 W which was attributed to the presence of graphene and burnt fibres. The laser ablation conditions corresponding to 10 W laser power, 300 mm s−1 scanning speed, 20 kHz of pulse frequency, 0.05 mm line spacing and 5 laser passes lead to the highest tensile strength (36.033 MPa) and bending strength (30.972 MPa) of GFRP laminates. The laser ablated microstructure was characterised by fibre pull-out, epoxy residue, burnt, clean fibres as evidenced by scanning electron microscopy.

Application of scalable sensor-assisted multi-scale computational methods in the simulation of micro mechanical behavior of composite materials

Micro mechanics involves the examination of the mechanical behavior of heterogeneous materials, taking into account inhomogeneities such as voids, fractures, and inclusions, and building on mathematical models developed. Composites bring engineering design barriers despite their strengths. Composite manufacturing and processing need specialized equipment, strategies, and labor, ensuring they are challenging and expensive. Mechanical behavior deals with how a composite material performs if faced with mechanical effects and action. Scalable sensor-assisted multi-scale computational Methods (SS-MSCM) are used to investigate topics ranging from the molecular basis of soot production in combustion to how molecule-level flaws influence macroscopic mechanical qualities. Carbon fiber reinforced polymers (CFRP) are generated by mixing graphene fiber with a resin, like vinyl ester and epoxy, to render a composite material with superior performance to the component ingredients. Hence, SS-MSCM-CFRP has Improved mechanical qualities achieved by incorporating nano-reinforcements, including carbon nanofibers and graphene nanoplates, into the CFRP matrix: enhanced flexural and compressive strengths, energy absorption upon impact, toughness to fracture, and interlaminar bonding. Composite materials feature excellent mechanical qualities like high strength and stiffness, fatigue resistance, and durability. It is possible to insert scalable sensors throughout the manufacturing process, which enables real-time monitoring of structural health, strain, and other factors. Scalable sensor-assisted multi-scale computational methods offer enhanced accuracy, real-time monitoring, and cost-effectiveness by integrating sensor data with computational models, improving predictions and failure mechanism insights. However, they face limitations like sensor dependency, computational complexity, data integration challenges, and high implementation costs, leading to potential discrepancies between simulation and experimental results. Important qualities include corrosion resistance, thermal conductivity, and electrical conductivity. As the composite materials develop to satisfy the established mechanical stress and temperature conditions, they offer high durability and strength.

Roller-like Spore Carbon Sphere-Orientated Graphene Fibers Prepared via Rheological Engineering for Lithium Sulfur Batteries.

Flexible batteries with large energy densities, lightweight nature, and high mechanical strength are considered as an eager goal for portable electronics. Herein, we first propose free-standing graphene fiber electrodes containing roller-like orientated spore carbon spheres via rheological engineering. With the help of the orientated microfluidic cospinning technology and the plasma reduction method, spore carbon spheres are self-assembled and orientedly dispersed into numerous graphene flakes, forming graphene fiber electrodes enriched with internal rolling woven structures, which cannot only enhance the electrical contact between active materials but also effectively improve the mechanical strength and structure stability of graphene fiber electrodes. When the designed graphene fibers are combined with the active sulfur cathode and lithium metal anode, the assembled flexible lithium sulfur batteries possess superior electrochemical performance with high capacity (>1000 mA h g-1) and excellent cycling life as well as good mechanical properties. According to density functional theory and COMSOL simulations, the roller-like spore carbon sphere-orientated graphene fiber hosts provide reinforced trapping-catalytic-conversion behavior to soluble polysulfides and nucleation active sites to lithium metal, thus synergistically suppressing the shuttle effect of polysulfides at the cathode side and lithium dendrite growth at the anode side, thereby boosting the whole electrochemical properties of lithium sulfur batteries.

Effect of atomic oxygen and vacuum thermal aging on graphene and glass fibre reinforced cyanate ester-based shape memory polymer composite for deployable thin wall structures

Deployable components and structures are a crucial part of space exploration. Due to fewer parts, low weight and cost, shape memory polymers (SMPs) and their composites (SMPCs) are considered ideal candidates for this. However, lower thermal stability and poor durability in the space environment have limited their applicability. This research work details the development of Graphene Nanoplatelets (GNP) filled Glass Fibre (GF) reinforced cyanate ester-based SMPC with 0/90° and ±45° sandwich fibre lay-up configuration capable of multidirectional shape programming. The SMP matrix was synthesised by mixing Cyanate Ester and Polyethylene Glycol (PEG) with added GNP. SMPC was fabricated by pouring the SMP mixture into a pre-prepared glass mould with the added GF layers. The synthesised SMPC showed shape programming and recovery at 169.01 ± 0.62 °C and stable thermomechanical properties at the temperature of 130 °C. Durability tests at extreme environmental conditions including Atomic Oxygen exposure, thermal vacuum aging, and elevated-temperature behaviour tests were conducted as these tests evaluate the durability and applicability of the SMPC for use in Earth's orbits and lunar environments. The performances of the samples before and after durability tests were measured through mechanical tests, shape memory effect tests and a series of characterisation methods such as microscopic image analysis, FTIR and dynamic mechanical analysis. According to the results, AO exposure affected the SMPCs by eroding their surface. There were no changes in the chemical structure of the SMPC yet the thermomechanical, mechanical and shape memory properties were decreased without compromising their safe operational levels such as storage onset temperatures (128.79 ± 3.08 °C), maximum tensile stress (114.99 ± 21.52 MPa), shape fixity (100 %) and recovery ratios (100 %). The erosion resistance of the GNP-filled SMPCs was improved with ∼54.35 % less erosion than the SMPC without GNP. The vacuum thermal aging slightly slowed shape recovery from 31.17 % to 8.32 % at 160 °C due to PEG crosslink degradation, however, 100 % shape recovery was achieved at the end. Further durability tests under cryogenic temperatures and effects after vacuum thermal cycles are warranted to observe the synergistic effect on the SMPC for future developments. Exploring the scalability and additive manufacturability of the developed SMPC can be advantageous in the future while mitigating challenges such as complex shape programming, long-term materials degradation, resource efficiency and compliance with safety standards.

Fabrication of high-performance graphene fiber: Structural evolution strategy from a two-step green reduction method

Graphene fibers (GFs) have a bright future in a variety of applications ascribing to their excellent performance. However, strict preparation conditions with extremely high graphitization temperature or toxic chemical reagents severely restrict their extensive implementation. Meanwhile, researchers are seeking easily scalable and eco-friendly GFs production methods. Here, we propose a green two-step reduction strategy involving L-ascorbic acid (LAA) chemical reduction followed by low-temperature annealing for the preparation of high-performance GFs. Benefiting from the elimination of macro-, micro- and nano-scaled defects and recombination of graphene nanosheets, the prepared GFs demonstrated amazing tensile strength of 778.49 MPa, Young's modulus of 92.61 GPa and an outstanding electrical conductivity of 3.2 × 104 S m−1, outperforming most of the chemically reduced GFs. This two-step green reduction strategy provides a new insight for constructing integrated high-performance GFs for sustainable application in many fields.

Influence of nano graphene filler on hardness, impact strength and density of glass epoxy composites

AbstractThis study investigates the effects of graphene reinforcement on the hardness and impact strength of glass epoxy composites. Four different materials were examined: pure epoxy (EP), glass epoxy (GE), glass epoxy with 1 wt.% graphene (GE1), and glass epoxy with 2 wt.% graphene (GE2). The results show that the incorporation of graphene significantly enhances the hardness of the composites. Pure epoxy (EP) exhibited a Shore D hardness of 60 and an impact strength of 0.09 J/m2. The glass epoxy (GE) showed a reduction in hardness to 56 but an increased impact strength of 0.15 J/m2 due to the inclusion of 33 wt.% glass fiber. Further addition of graphene in GE1 and GE2 led to notable improvements in hardness, reaching 68 and 74 Shore D, respectively. However, the impact strength displayed a decrease with the inclusion of graphene, with GE1 and GE2 showing values of 0.13 and 0.11 J/m2, respectively. When transitioning from pure epoxy (EP) to glass epoxy (GE), there is a 6.67% decrease in hardness, while the impact strength increases by 66.67%. Introducing 1 wt.% of graphene to the glass epoxy (GE1) results in a 21.43% increase in hardness but a 13.33% decrease in impact strength. Further adding 2 wt.% of graphene (GE2) leads to an additional 8.82% increase in hardness, though the impact strength decreases by 15.38%. X‐ray diffraction (XRD) analysis has revealed nano graphene presence and distribution, while fractography has revealed its effectiveness in enhancing interfacial adhesion and toughening mechanisms. Furthermore, XRD identifies potential changes in crystallinity or phase composition induced by nano graphene incorporation, further elucidating the composite's structure and properties. The study highlights the novel and significant trade‐offs encountered in optimizing the mechanical properties of epoxy‐based composites by incorporating graphene and glass fiber.

Innovative fabrication of ultrasensitive and durable graphene fiber aerogel for flexible pressure sensors

Elastic graphene aerogels have promising applications in flexible pressure sensors. However, it is still difficult to prepare graphene aerogels with high sensitivity and reliable mechanical stability due to the challenge in structural regulation. This study proposes an innovative method for preparing graphene aerogel by combining wet-electrospinning and freeze-drying. The resultant is a cotton-like 3D graphene fiber aerogel (GFA) with soft exterior but firm essence. The aerogel assembled of randomly stacked 1D graphene fiber, exhibiting softness and low compressive strength, thus ensuring the highly sensitive. Furthermore, this graphene fiber possessing strong mechanical properties after high-temperature thermal annealing, guarantees the fatigue resistance and elasticity of the aerogel. Therefore, the assembled GFA-based pressure sensor is ultrasensitive with a high sensitivity of 18.55 kPa−1 and a low detection limit of 2 Pa. Additionally, it has a rapid response time of 2 ms and maintains good stability even after 3000 cycles. The exceptional properties of GFA suggest its immense potential for application in human health monitoring and motion detection. In addition, the wet-electrospinning preparation of GFA provides a new strategy for the fabrication of graphene aerogels.

Self-assembled 3D CoSe-based sulfur host enables high-efficient and durable electrocatalytic conversion of polysulfides for flexible lithium-sulfur batteries

Lithium-sulfur (Li-S) batteries are considered as promising candidates for next-generation energy storage systems. However, the commercial applications are severely limited by the sluggish kinetics and shuttling effect. Herein, we have designed an integrated free-standing functional CoSe-CNF-GO-MXene (CCGM) sulfur host with a “point-line-plane” 3D porous structure for Li-S batteries. The two-dimensional (2D) graphene, MXene and one-dimensional (1D) nanocellulose fibers combined with zero-dimensional (0D) transition metal selenide (CoSe) shows good electrical conductivity and enhanced catalytic performance, respectively. Additionally, the rationally designed porous structure (from 0D to 3D) demonstrates well-connected ion/electron transport channels, conferring the good kinetic performance. Electrochemical tests show that CoSe catalytic materials with moderate adsorption energies can catalyse both precipitation and dissolution processes of Li2S, enabling fast conversion kinetics. The density functional theory (DFT) calculations show that the synergistic effect of CoSe, Ti3C2Tx, and graphene can improve the chemisorption and catalytic performance. As a result, the 3D porous S@CCGM cathode exhibits a high initial discharge capacity of 1205.1 mAh g−1 at 0.2C and good long-term cycling performance with a low decay rate of 0.055 % per cycle at 1C. Furthermore, the gel electrolyte Li-S pouch cell successfully passes the 0–180° bending test, nailing test, and cutting test. Such design offers a new perspective for the commercialization of safe and flexible electrochemical energy-storage devices especially in Li-S batteries.

High-Energy–Density Fiber Supercapacitors Based on Transition Metal Oxide Nanoribbon Yarns for Comprehensive Wearable Electronics

AbstractFiber supercapacitors (FSs) based on transition metal oxides (TMOs) have garnered considerable attention as energy storage solutions for wearable electronics owing to their exceptional characteristics, including superior comfortability and low weights. These materials are known to exhibit high energy densities, high specific capacitances, and fast redox reactions. However, current fabrication methods for these structures primarily rely on chemical deposition, often resulting in undesirable material structures and necessitating the use of additives, which can degrade the electrochemical performance of such structures. Herein, physically deposited TMO nanoribbon yarns generated via delamination engineering of nanopatterned TMO/metal/TMO trilayer arrays are proposed as potential high-performance FSs. To prepare these arrays, the target materials were initially deposited using a nanoline mold, and subsequently, the nanoribbon was suspended through selective plasma etching to obtain the desired twisted yarn structures. Because of the direct formation of TMOs on Ni electrodes, a high energy/power density and excellent electrochemical stability were achieved in asymmetric FS devices incorporating CoNixOy nanoribbon yarns and graphene fibers. Furthermore, a triboelectric nanogenerator, pressure sensor, and flexible light-emitting diode were synergistically combined with the FS. The integration of wearable electronic components, encompassing energy harvesting, energy storage, and powering sensing/display devices, is promising for the development of future smart textiles. Graphical Abstract

Controlled Synthesis of High-Aspect-Ratio Nitrogen-Doped Nanoporous Graphene Fibers for Stable Lithium–Sulfur Batteries

Controlled Synthesis of High-Aspect-Ratio Nitrogen-Doped Nanoporous Graphene Fibers for Stable Lithium–Sulfur Batteries

Multifunctional Laser-Induced Graphene-Based Microfluidic Chip for High-Performance Oocyte Cryopreservation with Low Concentration of Cryoprotectants.

Oocyte cryopreservation is essential in the field of assisted reproduction, but due to the large size and poor environmental tolerance of oocytes, cell freezing technology needs further improvement. Here, a Y-shaped microfluidic chip based on 3D graphene is ingeniously devised by combining laser-induced graphene (LIG) technology and fiber etching technology. The prepared LIG/PDMS microfluidic chip can effectively suppress ice crystal size and delay ice crystal freezing time by adjusting surface hydrophobicity. In addition, LIG endows the microfluidic chip with an outstanding photothermal effect, which allows to sharply increase its surface temperature from 25 to 71.8°C with 10s of low-power 808nm laser irradiation (0.4Wcm-2). Notably, the LIG/PDMS microfluidic chip not only replaces the traditional cryopreservation carriers, but also effectively reduces the dosage of cryoprotectants (CPAs) needed in mouse oocyte cryopreservation. Even when the concentration of CPAs is cut in half (final concentration of 7.5% ethylene glycol (EG) and 7.5% dimethyl sulfoxide (DMSO)), the survival rate of oocytes is still as high as 92.4%, significantly higher than the control group's 85.8%. Therefore, this work provides a novel design strategy to construct multifunctional microfluidic chips for high-performance oocytes cryopreservation.

Development and Characterization of Pineapple Leaf Fibre Reinforced with Graphene and Fibre Glass Composites for Aerospace Application

Natural fibre-based compositessuch as Pineapple leaf fibre (PALF)are valued for their environmental friendliness and unique properties, can be combined with graphene and glass fibres to create advanced aerospace composites. This study investigates the effects of graphene content and PALF composition on the mechanical properties of the composite. PALF is made using environmentally friendly methods, with graphene treated for better integration and fibre glass added through layering. This study compares the strength and flexibility of two samples with different PALF-to-fibreglass ratios: 50:50 and 70:30, and one sample with a 70:30 PALF-to-fibreglass ratio reinforced with 1% graphene, using tensile and flexural tests. The 70:30 composition ratio results in a lower maximum tensile strength and Young’s modulus, but a higher bending stress than the 50:50 ratio due to the higher volume of PALF in the sample. 70:30 PALF/fibreglass reinforced with 1% graphene is stiffer, resulting in a higher Young’s modulus compared to the sample without graphene. There is a slight decrease in flexural strength for the 70:30 PALF/fibreglass ratio reinforced with 1% graphene, while still maintaining superior bending stress strength compared to 50:50 ratio compositions. From the SEM test, PALF/fibreglass samples exhibited fibre pull-out, while 70:30 samples reinforced with graphene showed fibre breakage. Graphene enhanced the bonding between fibres and resins, leading to the breakage.Without graphene, weaker bonding led to fibre pull-out. Therefore, the PALF/fibreglass reinforced with graphene has the potential for aerospace applications, particularly in components subjected to high bending stress, such as aircraft wings or the horizontal tail.

Scalable Compliant Graphene Fiber-Based Thermal Interface Material with Metal-Level Thermal Conductivity via Dual-Field Synergistic Alignment Engineering.

High-performance thermal interface materials (TIMs) are highly desired for high-power electronic devices to accelerate heat dissipation. However, the inherent trade-off conflict between achieving high thermal conductivity and excellent compliance of filler-enhanced TIMs results in the unsatisfactory interfacial heat transfer efficiency of existing TIM solutions. Here, we report the graphene fiber (GF)-based elastic TIM with metal-level thermal conductivity via mechanical-electric dual-field synergistic alignment engineering. Compared with state-of-the-art carbon fiber (CF), GF features both superb high thermal conductivity of ∼1200 W m-1 K-1 and outstanding flexibility. Under dual-field synergistic alignment regulation, GFs are vertically aligned with excellent orientation (0.88) and high array density (33.5 mg cm-2), forming continuous thermally conductive pathways. Even at a low filler content of ∼17 wt %, GF-based TIM demonstrates extraordinarily high through-plane thermal conductivity of up to 82.4 W m-1 K-1, exceeding most CF-based TIMs and even comparable to commonly used soft indium foil. Benefiting from the low stiffness of GF, GF-based TIM shows a lower compressive modulus down to 0.57 MPa, an excellent resilience rate of 95% after compressive cycles, and diminished contact thermal resistance as low as 7.4 K mm2 W-1. Our results provide a superb paradigm for the directed assembly of thermally conductive and flexible GFs to achieve scalable and high-performance TIMs, overcoming the long-standing bottleneck of mechanical-thermal mismatch in TIM design.

Exploring the potential of graphene fibers

With rapidly improving properties, graphene fibers are becoming indispensable materials in a range of fields like the aerospace industry and biomedicine.

Covalently bridging graphene edges for improving mechanical and electrical properties of fibers

Assembling graphene sheets into macroscopic fibers with graphitic layers uniaxially aligned along the fiber axis is of both fundamental and technological importance. However, the optimal performance of graphene-based fibers has been far lower than what is expected based on the properties of individual graphene. Here we show that both mechanical properties and electrical conductivity of graphene-based fibers can be significantly improved if bridges are created between graphene edges through covalent conjugating aromatic amide bonds. The improved electrical conductivity is likely due to extended electron conjugation over the aromatic amide bridged graphene sheets. The larger sheets also result in improved π-π stacking, which, along with the robust aromatic amide linkage, provides high mechanical strength. In our experiments, graphene edges were bridged using the established wet-spinning technique in the presence of an aromatic amine linker, which selectively reacts to carboxyl groups at the graphene edge sites. This technique is already industrial and can be easily upscaled. Our methodology thus paves the way to the fabrication of high-performance macroscopic graphene fibers under optimal techno-economic and ecological conditions.

Properties of Multistranded Twisted Graphene Fibers and Their Application in Flexible Light-Emitting Devices.

As a typical carbon-based material electrode, graphene fiber exhibits many advantages, such as good electrical conductivity, lightweight, and strong structural designability. Its demand is increasing in the wearable display field. With the help of fine denier fiber spinning combined with multistranded graphene fibers prepared via twisting and drafting, their petal-like twisted structure endows the fibers with a high specific surface area, enabling them to complete dye adsorption within 30 min. Simultaneously, compared with that of a single fiber with the same thickness, the volume specific resistance of a multistranded twisted graphene fiber is reduced by 2.4 times. During force sensing, the twisted structure of multistranded fibers exhibits varying simultaneity of fiber fracture with excellent resistance sensitivity reaching up to 55%. The multistranded twisted flexible graphene fibers demonstrate excellent robustness. Electroluminescent flexible devices prepared with graphene fibers and fiber braided fabrics with different organizational structures as electrodes emit highly saturated short-wave blue light during long-term multiple use. Therefore, multistranded twisted graphene fibers exhibit considerable potential for future applications in wearable multicolor smart displays and flexible optical signal electronics.

Synthesis and novel applications of graphene fibers

The past decade has witnessed dynamic and fruitful developments of carbon materials. Particularly, graphene fibers emerge as a new type of carbon material directly composed of graphene sheets with unique structure, excellent electrical conductivity, strength, and lightweight properties, thus attracting increasing interest of scientists in multi-disciplines ranging from chemistry, materials science, biology to medical science. In this Perspective, we summarize latest progresses in the synthesis of graphene fibers and discuss their pros and cons. Then, various strategies for improving the mechanical, electrical, and thermal properties of graphene fibers are introduced in detail. Subsequently, recent applications of graphene fibers are highlighted, such as self-powered devices, photovoltaics, neural recording microelectrodes, etc., aiming to present the state of the art in this fast-growing field. Finally, the current limitation and future prospect of large-scale application of graphene fibers are also proposed. With the continuous development of materials and techniques, graphene fibers are projected to take more important roles in diverse fields in the future.