Granitic Rocks Research Articles

Analysis of Granite Deformation and Rupture Law and Evolution of Grain-Based Model Force Chain Network under Anchor Reinforcement

In actual underground rock engineering, to prevent the deformation and damage of the rock mass, rock bolt reinforcement technology is commonly employed to maintain the stability of the surrounding rock. Therefore, studying the anchoring and crack-stopping effect of rock bolts on fractured granite rock mass is essential. It can provide significant reference and support for the design of underground engineering, engineering safety assessment, the theory of rock mechanics, and resource development. In this study, indoor experiments are combined with numerical simulations to explore the impact of fracture dip angles on the mechanical behavior of unanchored and anchored granite samples from both macroscopic and microscopic perspectives. It also investigates the evolution of the anchoring and crack-stopping effect of rock bolts on granite containing fractures with different dip angles. The results show that the load-displacement trends, displacement fields, and debris fields from indoor experiments and numerical simulations are highly similar. Additionally, it was discovered that, in comparison to the unanchored samples, the anchored samples with fractures at various angles all exhibited a higher degree of tensile failure rather than shear failure that propagates diagonally across the samples from the regions around the fracture tips. This finding verifies the effectiveness of the numerical model parameter calibration. At the same time, it was observed that the internal force chain value level in the anchored samples is higher than in the unanchored samples, indicating that the anchored samples possess greater load-bearing capacity. Furthermore, as the angle αs increases, the reinforcing and crack-stopping effects of the rock bolts become increasingly less pronounced.

Petrochemistry and Tectonic Setting of the Phroa-Wiang Pa Pao Granitic Rocks, Chiang Mai, and Chiang Rai Provinces, Central Granitic Belt of Thailand

The Phrao-Wiang Pha Phao granitic rocks are crop out along Highway Number 1150 (Phrao-Wiang Pa Pao) in Chiang Mai and Chiang Rai provinces. The geologic investigation as field observation, lithology, petrography, geochemistry, and tectonic interpretation applied for this study. The least-altered 19 rock samples were collected and performed in stained rock slabs for modal analysis and standard thin sections for petrographic analysis. Based on the Quartz-Alkali Feldspar-Plagioclase diagram for plutonic rocks, the rock samples in the Phrao area are granodiorite, and one is biotite-monzogranite, while most of the rock samples in the Wiang Pa Pao area are biotite-monzogranite. The petrographic investigation for rock samples indicated that granitic samples have medium to coarse-grained and show porphyritic texture. The orthoclase phenocrysts are sitting in the groundmass and are composed of quartz, plagioclase, and orthoclase feldspar, with a minor amount of biotite, muscovite, apatite, zircon, titanite, and opaque minerals. The granitic samples can be classified as granodiorite to monzogranite, which is high-K calc-alkalic affinity and peraluminous S-type based on geochemistry. Based on the normative mineralogy calculation, the rock samples were composed mainly of normative quartz, plagioclase, and orthoclase, with minor corundum, hypersthene, magnetite, ilmenite, apatite, zircon, and chromite. The S-type granitoid supported by normative corundum and Na2O/K2O ratios less than 0.49 at Na2O ranging from 1.53 - 2.35 wt %. Their tectonic setting of formation appears to be a post-orogenic environment (post-collisional granite) of the Sibumasu and the Indochina blocks. The Phrao Phrao-Wiang Pha Phao granitic rocks are a part of the Central Granitic Belt and are related to tin-tungsten deposits with rare earth elements. HIGHLIGHTS Tectonic setting of the Phroa-Wiang Pa Pao Granitic Rocks, Thailand. Petrography and modal analysis The geochemistry analysis by XRF and CIPW normative calculation. The Central Granitic Belt in Thailand. GRAPHICAL ABSTRACT

Pioneering study of radioactivity in soil near the Payra 1320 MW Thermal Power Plant, the largest coal-fired thermal power plant in Bangladesh

ABSTRACT Coal combustion increases atmospheric radioactivity, harming those live in the periphery of coal-fired thermal power plants (CFTPPs). A pioneering study has been performed using a high-purity germanium detector by analysing 30 soil samples collected from distances of 50, 600, 1200, and 3000 metres in the periphery of the largest 1320 MW CFTPP, Payra, Bangladesh. The activity concentrations of 226Ra, 232Th and 40K ranged from 19–32, 31–90, and 420–870 Bq/kg, respectively, with most of the samples show 232Th and 40K levels above global averages. Elevated levels of 232Th and 40K in soil around Payra thermal power plant stem from natural minerals, granitic rocks, ash disposal, coal combustion residues, and environmental factors. Radiological hazard indices, including dose rates and cancer risk, exceed global averages, indicating unsafe radiation exposure for coal miners and locals. These findings are crucial for planning coal-fired power plants and stress the need for municipal regulation of fly ash and health monitoring to mitigate risks for workers and residents.

The role of different explosives in reducing energy and emissions in mining comminution for sustainable improvement

In the mining industry, comminution represents one of the most energy-intensive activities that generate large amounts of CO2, making it a great challenge to the industry. Using high explosives in the blasting operation can cover this comminution-related challenge. In this study, the effect of blasting on the comminution was investigated considering the mentioned challenge by blasting samples of granite rock mass using three types of common explosive materials, namely ANFO, emulite, and pentolite, at different powder factors, contrasting with other studies that focus primarily on increasing the powder factor of a specific type of explosive. Based on the results of this study, it was observed that compared to ANFO, other explosives tested in this work increased the energy consumption per ton of rock mass in the blasting stage by 1.1–1.8 times, with CO2 emission for the ANFO, emulite, and pentolite measured at 0.78 × 10−3 kg, 3.10 × 10−3 kg, and 5.14 × 10−3 kg, respectively. Also, Using ANFO, emulite, and pentolite led to 4.47 %, 6.45 %, and 7.07 % relative advantages in terms of saving total mining energy in the comminution stage. Finally, CO2 emissions for the comminution stage were estimated using Bond's indices and regional electricity data.

Experimental Study on Nonlinear Fluid Flow Characteristics of Fractured Granite Rocks Treated by Chemical Corrosion Under Confining Pressure Conditions

Experimental Study on Nonlinear Fluid Flow Characteristics of Fractured Granite Rocks Treated by Chemical Corrosion Under Confining Pressure Conditions

Garnet as a carrier of HREEs in highly fractionated peraluminous granite: Implications for the formation of ion-absorption HREE deposits

Ion-absorption rare earth element (REE) deposits in South China are the world’s most important source of heavy REEs (HREEs). These deposits were formed by the weathering of granitic rocks whose formation involved primary HREE enrichment. Previous studies have identified the key role of late-stage magmatic evolution, especially the magmatic–hydrothermal transition stage played in HREE enrichment, but the detailed processes need further investigation. Garnet is a common HREE carrier in parent rocks and also a main contributor of these elements in formation of ion-absorption HREE deposits. Here, we investigate textural and compositional variations in garnets from parent rock (muscovite granite) of the Dabu ion-absorption HREE deposit to constrain the primary HREE enrichment of the parent rock during late-stage magmatic evolution. Mass-balance calculations reveal that garnet accounts for ∼67 % of the Y and 64 % of the REEs in the Dabu muscovite granite. The garnets can be classified into three types: i) magmatic garnets (Grt-1A) are intergrown with plagioclase, K-feldspar, and quartz, host both melt and mineral inclusions, and have high REE + Y contents (6488–19,215 ppm); ii) magmatic–hydrothermal garnets (Grt-1B) occur as overgrowths on Grt-1A, host both melt and fluid inclusions, and have intermediate REE + Y contents (2681–8683 ppm); and iii) hydrothermal garnets (Grt-2) are intergranular with quartz and altered biotite, host primary fluid inclusions, and have the lowest REE + Y contents (476–1247 ppm). The texture and composition of the three types of garnet indicate that the magma have undergone a transition from a volatile-undersaturated to a volatile-oversaturated aqueous system. The fluid, from which some REE minerals precipitated, present in the magma system was derived from the magma itself rather than from an external source, as evidenced by the similarity in Nd isotopic composition between the REE minerals and the whole-rock samples. During this transition, the presence of high-HREE garnet prevents the HREE partitioning into refractory minerals (e.g., zircon, REE-bearing phosphate) or extracting from the magma system by the fluid. Our findings show that granites containing high-HREE garnet have high potential for forming ion-absorption HREE deposits and that garnet can reliably record their magmatic evolution.

Geochronology and Geochemical Characteristics of Granitoids in the Lesser Xing’an–Zhangguangcai Range: Petrogenesis and Implications for the Early Jurassic Tectonic Evolution of the Mudanjiang Ocean

This article focuses on zircon U-Pb isotope dating and a whole-rock elemental analysis of granodiorites, monzonitic granites, granodioritic porphyries, and alkali feldspar granites in the Yangmugang area of the Lesser Xing’an–Zhangguangcai Range. The zircon U-Pb isotope-dating results revealed that these granitic rocks formed during the late Early Jurassic period (182.9–177.2 Ma). Their geochemical characteristics and zircon saturation temperatures suggest that the granodiorites are moderately differentiated I-type granites and the monzonitic granite, granodioritic porphyries, and alkali feldspar granites are highly differentiated I-type granites. The degree of magma differentiation progressively increased from granodiorites to alkali feldspar granites. By combining the regional Nd and Hf isotope compositions, it was inferred that the magma source involved the melting of lower crustal material from the Mesoproterozoic to the Neoproterozoic eras. By integrating these findings with contemporaneous intrusive rock spatial variations, it was indicated that the late Early Jurassic granitoids in the Lesser Xing’an–Zhangguangcai Range formed within an extensional tectonic setting after the collision and closure of the Songnen–Zhangguangcai Range and Jiamusi blocks. Additionally, this study constrains the closure of the Mudanjiang Ocean to the late Early Jurassic period (177.2 Ma).

The presences of water in the generation of calc-alkaline I-type granitic magmas at continental arc: Insight from Neoproterozoic Ailaoshan magmatism at the southwestern margin of the Yangtze Block, South China

Water is crucial in generating granitic systems; however, its role (i.e., dehydration, low to high water-fluxed melting) in granitic magmatism in continental arcs remains unsettled and poorly understood. Neoproterozoic arc-related igneous rocks are uncovered along the western margin of the Yangtze Block, presenting a complex compositional array ideal for deciphering the influence of water content within the continental arc and its geodynamic significance. The Jinping granites, in the Ailaoshan zone, are emplaced at 750 ± 4 Ma, as determined by zircon U-Pb dating. These medium to coarse-grained granites consist predominantly of plagioclase, quartz, K-feldspar, muscovite, and biotite. Characterized by high SiO2 (71.2–73.5 wt%), alkalis (K2O+Na2O=7.54–9.56 wt%) and low Fe2O3T (1.01–1.66 wt%), MgO (0.53–0.85 wt%), and CaO (0.15–0.93 wt%) concentrations, they exhibit high-K calc-alkaline signatures. The negative correlation between P2O5 and SiO2, alongside the positive correlation between Rb and Y, typifies the Jinping granites as I-type granites. Low La/Nb (1.96–3.43) and Nb/Ta (8.57–11.3) ratios, but high Th/La (0.28–0.46) and Zr/Sm (30.5–47.7) ratios, as well as whole rock εNd(t) (−0.4 to +1.3) and zircon εHf(t) values (+5.25 to +8.53) of the studied granites are similar to synchronous mafic rocks at the western margin of the Yangtze Block. These features suggest partial melting origin from the mafic lower crust. Thermodynamic modeling posits that the Neoproterozoic Ailaoshan I-type granitic rocks may have formed through water-fluxed melting (2.0–3.5 wt% H2O) under medium pressure conditions (9 kbar). It is postulated that slab rollback could have prompted water (as hydrous melt or fluids) release from hydrous minerals in the underlying cumulate mafic rocks, subsequently triggering water-fluxed melting in the lower crust. In contrast, high water-fluxed melting-generated adakitic granites with low K2O/Na2O ratios (<0.8) in the region, spatially and temporally associated with the Jinping granites, reflect higher water content in the deeper crust. This supports the notion that water was conveyed from depths to surface, facilitating the conversion of adakitic rocks into I-type granites as water content diminished. Thus, water content within the lower crust plays a pivotal role in the genesis of granitic rocks with varied compositions in a continental arc setting.

A complete experimental study on hard granites: Microstructural characterization, mechanical response, and failure criterion

This study, performed during the ORCHYD European project, devoted to drilling deep geothermal boreholes, has many potential applications to mechanical studies. It gathers geological descriptions of three outcropping granites from Scandinavia (Kuru Grey and Red Bohus) and from the South of France (Sidobre). Microstructural investigations include optical microscopy and X-ray tomography. The three granites chosen contain grain sizes that cover all the common ranges for granites: fine, medium and coarse. As the mineral phase volume fractions are similar in each, the grain defects and grain boundaries are carefully studied in an attempt to understand the physical and mechanical properties of the three granite rock samples measured at laboratory specimen scale. The rocks are tested for UCS, BTS and triaxial compressive strength with confining pressures up to 225 MPa or/and high strain-rates up to 103/s. The micro-structural parameters influencing the mechanical behaviour are highlighted. Test results show that the effect of confining pressure and strain-rate on compressive strength are uncoupled. These effects are then estimated independently, and a fracture criterion in compression accounting for both variables is proposed for the family of very hard granites. This criterion takes as a single reference strength measure for each rock the deviatoric stress at failure under 20 MPa confining stress in the quasi-static regime. It is then compared with existing datasets for which both quasi-static and dynamic regime data are available. This complete data set on these three very hard granites (UCS ∼ 200 MPa), together with a synthesis for failure prediction, has the potential to inform numerous rock engineering projects and be of value to the scientific community.

Enhanced enrichment of rare earth elements during pedogenesis under subtropical climate

Rare earth elements (REE) are crucial strategic resources, and weathering-crust rare earth deposits are one of the primary sources. To systematically understand the geochemical behavior (e.g., enrichment and leaching) of REE in soils (or weathering crusts) formed from diverse parent rocks under varying climatic conditions, 171 soil profiles (weathering crusts) developed from three main types of parent rocks (granite, basalt, and carbonate rock) worldwide were studied. Granite shows the highest concentration of rare earth elements at 264 (interquartile range (IQR): 278) ppm, 171 (IQR: 151) ppm and 11.9 (IQR: 36.4) ppm in basalt and carbonate rock, respectively (median test: p &lt; 0.05). The median REE values within the soil profiles were significantly different (median test: p &lt; 0.05), with the concentration of 318 (IQR: 441) ppm, 267 (IQR: 217) ppm and 207 (IQR: 417) ppm in soils derived from granite, carbonate rock, and basalt, respectively. Principal component analysis (PCA) and Linear mixed-effects models (LME) revealed that soils developed from granite and basalt inherit the mineral characteristics of their parent rocks, with REE concentrations primarily influenced by the REE content of the parent rock and climate. In contrast, the REE concentrations in soils developed from carbonate rocks are predominantly controlled by climate. LME and correlation analysis indicates that the enrichment of REE (Q REE ) shows a trend of initially increasing and then decreasing with rising temperature and precipitation, due to variations host clay minerals. The greatest enrichment occurs in the subtropical region (mean annual temperature (MAT) = 15 ̶ 23 °C; mean annual precipitation (MAP) = 1000 ̶ 2000 mm); weathering-crust type REE deposits are primarily found in the subtropics.

Titanite: A source, thermodynamic, and temporal proxy for W-Mo-Cu Skarn mineralization at the Seridó Mineral Province, Northeastern Brazil

New zircon U-Pb geochronology (SHRIMP) and geochemistry combined with geochronology (LA-ICP-MS) of titanite data are provided to investigate the metallic sources (whether igneous or sedimentary) and the temporal evolution of one of the most relevant Precambrian metallogenic provinces of the South American Platform, the Seridó Mineral Province. The granites of Serra de João do Vale pluton, calc-silicate “skarnoid” rocks and paragneiss related to the Bonito W-Mo-Cu exoskarn deposit were investigated. It was analyzed titanites of magmatic (Serra de João do Vale), hydrothermal (calc-silicate rocks) and metamorphic (paragneiss) origin. The magmatic titanite is wedge-shaped with larger grain size (up to 250 μm), richer in HFSE elements, Al and Fe, and manifests negative Eu anomalies (Eu/Eu × averaging 0.31–0.60). The hydrothermal titanite is found alongside epidote and calcite, have subhedral shapes and medium grain size (up to 150 μm). The metamorphic titanite is anhedral, generally smaller than 100 μm and appear as thin coronae in ilmenite or as inclusions in biotite. Both metasomatic and metamorphic titanites manifest positive Eu anomalies (Eu/Eu × averaging 1.20 and 1.06, respectively) and are enriched in Ti, Rb and U in relation to the magmatic. Conventional mineral thermobarometry (Al-in-titanite independent barometer, and Zr-in-titanite thermobarometer) provided pressures between 400 and 550 MPa and temperatures between 720 and 787 °C for the crystallization history of the granite, coeval with the regional peak metamorphism at 568–624 °C and 300–500 MPa (Ti in biotite independent barometer and biotite-muscovite thermobarometer). Conditions for the titanite-epidote calc-silicate assemblage were constrained through thermodynamic modelling in NCKFMAST + COH pseudosection at 439 ± 35 °C and 190 ± 50 MPa. The zircon U-Pb age registered the magmatism between 585.5 and 580.5 Ma. Titanite U-Pb ages from granite and calc-silicate rocks timed the closure of U-Pb system at the isotherm of 550 °C between 562 and 557 Ma. (20 m.y. after the intrusion), which marks the metasomatic process. The average W content in paragneisses and calc-silicate titanites (35.8–35.5 ppm) is 4 times higher than in the granite (6.76 ppm), reaching a maximum of 328 ppm. Mo and Cu mirrors this behavior, with concentrations that exceed nearly double that of titanites from Serra de João do Vale granites, peaking at 308 ppm of Mo and 162 ppm of Cu. Metal contents in titanite disclose the metasiliciclastic rocks of the Jucurutu Formation as, at least partially, a source of metals (mainly for W, but also Cu and Mo) in the skarn mineralization during the terrane exhumation at the end of Ediacaran period.

Chemical and isotopic constraints on fluid origin and genesis of geothermal systems in the Tingri-Tangra Yumco rift, southern Tibetan Plateau

Numerous geothermal systems are hosted by extensional rifts that transect the Himalayas and Lhasa block in the Himalayan–Tibetan orogen. However, the relationships between hydrogeological processes and geothermal fluid circulation in different tectonic units remain unclear. Here, we report an integrated dataset of chemical and isotopic compositions (including major and trace elements, δD, δ18O, and 87Sr/86Sr) of thermal spring water from the Tingri-Tangra Yumco rift to assess their origins and circulation processes. δ18O (− 21.3 to − 17.0‰) and δD (− 166 to − 135‰) values of thermal springs indicate dominant recharge of meteoric waters from areas with elevation of > 6000 m and minor addition of magmatic fluids. Meteoric water could infiltrate to depths of about 1700–2900 m along the faults, whereby it is influenced by geothermal gradient and/or conductive heat transfer of magmatic fluids. The thermal spring waters are mainly Na-HCO3 type and are controlled by dissolution of silicate and carbonate minerals and mixing with deep fluids. The results of chemical and multicomponent geothermometers indicate reservoir temperatures of 115 − 195 ℃, corresponding to a convection heat flux of 3.96 × 105 J/s to 1.78 × 107 J/s from geothermal systems, which are comparable to that of the low-enthalpy geothermal systems in southern Italy. Geochemical modeling is conducted to assess the water–mineral equilibria in the reservoir. Trace elements and 87Sr/86Sr data suggest spatially variable controlling factors for the rift-related geothermal systems: (1) interaction with granitoid and carbonate in the Himalayas; (2) cold groundwater mixing with that leaching from granite and volcanic rocks in the Lhasa block; (3) the input of vapors from magmatic degassing. The geochemistry of thermal springs associated with extensional rift is largely induced by the interaction between fluid and different reservoir rocks in the Himalayas and Lhasa block. Based on these findings, a genetic model is proposed for exploration and development of geothermal resources in the Tingri-Tangra Yumco rift.

Formation of a Large Cold Groundwater Mantle Helium Anomaly and High Temperature Geothermal Resources in Response to Bimodal Magmatism Near Roosevelt Hot Springs and Utah FORGE, Milford Valley, Southwest Utah

AbstractA large mantle helium anomaly and separate domains of high heat flow are the predominant manifestations of bimodal magmatic activity in the Milford valley. The mantle helium anomaly (1.9–2.6 R/Ra) covers 270 km2 and is subdivided into two separated domains: a cold shallow groundwater regime and high temperature hydrothermal activity. The zone of anomalous heat flow covers &gt;100 km2 and is also subdivided into two adjacent domains, comprising hydrothermal activity at Roosevelt Hot Springs (RHS) (3–7 W/m2) and conductive heat flow (100–180 mW/m2). While the transfer of heat and mantle helium at RHS are coupled, heat and helium transfer are decoupled in the adjacent cold groundwater regime to the west. Both the mantle helium and geothermal anomalies are attributed to recent mafic‐felsic magmatic intrusions of &gt;400 km3, however, the absence of volcanic eruptions &lt;500,000 years indicates magmas stall before rising to shallow crustal level &lt;10 km depth. Deep level magmatism produces a felsic composition melt, which is inferred to be responsible for the widespread and near uniform range of diluted mantle helium values. A thick and impermeable mass of crystalline granitic basement rock at the mid‐crustal level divides the ascent of mantle helium into separate flow paths. It may also impede the rise of buoyant magma trapping thermal energy that facilitates partial melting, slow cooling, and development of a thick thermal aureole. Partitioning of convective and conductive thermal regimes and independent flow paths supplying deeply derived helium characterize the development of a large long‐lived magma‐related geothermal system.

Kinetic simulation of uranium migration in granite fissure media of beishan, gansu, China: A case study based on the Laplace transform and inverse transform methods

Deep geological disposal is currently considered the most practical and feasible method for disposing high-level radioactive wastes (HLWs). One of its key scientific issues is the migration of nuclides in fissure media. However, studies on the migration of nuclides like U-238 are relatively limited. In this study, the granite rock masses in Beishan, Gansu were selected to construct a physical and mathematical model of U-238 migration using the Laplace transform and inverse transform methods. Based on the numerical methods, the kinetic migration of nuclide U-238 in the fissure media of granite was simulated, and the effects of parameters such as fissure width, hydraulic gradient, diffusible area ratio and rock porosity on the migration of U-238 were investigated. The following insights were obtained: (1) After 100,000 years, U-238 has a very limited diffusion depth in the matrix domain, with a diffusion range of only a few tens of millimeters, whereas it migrates relatively quickly in the fissure domain, with a maximum migration distance of about 1500 m. (2) Under the same migration time and distance, the relative concentration of nuclide U-238 in the fissure domain increases with larger gap width, hydraulic gradient, and diffusible area ratio, but decreases with higher rock porosity. (3) In the same time range, the rock masses with larger gap widths, hydraulic gradients, and diffusible area ratios have larger migration ranges, while those with higher porosities have smaller migration ranges. (4) While selecting a site for diposal of HLWs, it is recommended to choose rock masses in the granite area of Beishan with no fissures or few fissures; additionally, areas with smaller fissure widths, hydraulic gradients, and diffusible area ratios but higher rock porosity should be prioritized. This study can provide important theoretical support for understanding nuclide migration in the future geological disposal of HLWs.

Zircon U-Pb-Hf isotopes constraints on the petrogenesis of Neoarchean granitic rocks from the Northeastern part of the Eastern Dharwar Craton, Southern India

In the present study, we integrate bulk rock chemistry and in-situ zircon U-Pb-Hf isotopes of high-K Neoarchean granitoids from the northeastern part of the Eastern Dharwar Craton (EDC) to investigate their source, petrogenesis, and plausible tectonic setting. Based on the mineral assemblage, in coherence with their geochemical characteristics, these granitoids are classified as Hornblende-biotite granite (HBG) with Microgranular enclaves (ME), Biotite granite (BTG) and Monzogranite (MG). Field observations and zircon U-Pb ages reveal coeval emplacement of these granitoids between 2.53 and 2.50 Ga. The HBG, including ME, has low silica, metaluminous affinity, and high ferromagnesian element content, consistent with their derivation from a mafic source. Some of the HBG and ME samples are strongly enriched in incompatible elements, similar to the sanukitoids. The geochemical attributes and strongly evolved zircon Hf isotopic compositions (ɛHf(t) = −4.3 to +1.8 and −7.3 to +0.2) of the HBG and ME suggest their derivation from a mantle source metasomatized by subducted sediments. The BTG and MG are compositionally similar, with high silica, low ferromagnesian element content, and moderate peraluminous affinity, suggesting the involvement of felsic crustal sources. The sub-chondritic to chondritic zircon Hf isotopic compositions (ɛHf(t) = −2.7 to +1.4 and −6.9 to +1.9) of these granitoids support the involvement of heterogeneous ancient crustal sources. While all granitoids exhibit similar zircon Hf isotopic compositions, their geochemical attributes suggest distinct sources. The HBG reflects juvenile crustal additions, whereas BTG and MG are products of the crustal reworking. We propose that these granitoids formed during the continent-continent collision between Western and Eastern Dharwar cratons, that took place after the break-off of the eastward subducting slab. The asthenospheric upwelling induced by slab break-off and/or lithospheric delamination of thickened crust led to the genesis of metasomatized mantle derived magma, which drove the crustal reworking. The observed zircon Hf isotopic composition of the EDC granitoids are similar to the present day Phanerozoic Alpine-Himalayan type orogenies supporting subduction followed by continental collision model for the stabilisation of Archean cratons. Evidence for the existence of Paleo- Mesoarchean felsic crust from this part of the EDC warrants further studies to test the three-terrane model for the Dharwar Craton.

Nuclear and complementary analytical techniques for elemental analysis of granite rock samples

Nuclear and complementary analytical techniques for elemental analysis of granite rock samples

A series of regression models to predict the weathering index of tropical granite rock mass

In the recent past, several weathering indicators have been developed to describe its state of weathering. The state of rock weathering is a useful indicator to estimate the integrity of tropically weathered rock material and mass which weatherability plays an important role in a tropical region. Through a ground assessment tool, the strength and durability of the rock mass could be estimated and complex or adopted to simplify the early prediction of the complex engineering parameter. This paper presents several models of the Weathering Index (WI) using selected significant parameters using statistical analysis. For this purpose, several sites have been chosen to represent granitic rock mass. Forty (40) numbers of samples were collected and tested comprising from four (4) sites in Malaysia. Several laboratory tests have been conducted such as Point Load Index (Is(50)), dry density, Slake Durability 1 (SD1), Slake Durability 2 (SD2) and moisture content. The field and laboratory data sets are used to determine the WI by using simple regression and MLR analysis Significant parameters found to be useful in determining the WI are selected namely SD1, dry density, Is(50), and block volume. These parameters were selected based on stepwise analysis using Statistical Package for the Social Sciences (SPSS). Following the models’ implementation, the models were evaluated and the best prediction model was selected after considering statistical coefficients, such as coefficient of determination (R2), variance account for (VAF), and root mean squared error (RMSE), as well as utilizing a straightforward ranking approach. The findings of this study could contribute to the more accurate prediction of WI using a more simplistic field and laboratory parameters. Therefore, the WI is useful during the initial stages and planning of rock excavation work and provides a good description of weathering grade and rock mass properties, which will affect excavatability in granitic areas.

Application of magnetic data and satellite spectral imaging in identifying gold mineralization zones and its associated subsurface structures at Fawakheir-Attala area, Central Eastern Desert, Egypt

The Fawakheir-Attala gold mining zone in Egypt’s Central Eastern Desert features a diverse range of rock formations, including Precambrian crystalline rocks and Phanerozoic sedimentary formations. These formations encompass gneisses, metavolcanics, metasediments, a metagabbro-diorite complex, Dokhan volcanic rocks, and granitic rocks, alongside lower and upper Nubia sandstones. Faults and shear zones are pivotal in controlling gold mineralization within the area, indicative of substantial mineral wealth. This study aimed to map subsurface structural characteristics and investigate gold mineralization zones using aerial magnetic data and ASTER remote sensing, the latter of which played a crucial role in highlighting the surface exposure of alteration zones. Geological surveys combined with remote sensing techniques were employed to identify rock types and mineralization zones, while magnetic methods, including aeromagnetic surveys and ground-based studies, were used to reveal underlying structural properties and fault systems. Analysis of aeromagnetic data revealed a large mineralization zone running from the Fawakhir Gold mine through the Attala Gold mine in a NW–SE direction. Various structural trends and faults, including NW–SE, NE–SW, E–W, and N–S directions, were identified, strongly associated with hydrothermal alteration zones and gold mineralization. Shallow basement relief was observed in the eastern and central regions, contrasting with deeper formations and greater relief in the western section. Land magnetic surveys were utilized to identify new areas for gold mineralization, with geochemical analysis confirming gold content in quartz veins and host rocks. The integration of magnetic and remote sensing techniques effectively highlighted alteration zones indicative of potential mineralization, which could have a subsurface continuation, aiding in the identification of gold occurrences connected to faults, lineaments, and mineralization zones.

Provenance of the Trainor's Rocks microconglomerate, Northern Ireland: a mid-Silurian (Hawick Group) submarine channel fan deposit in the closing Iapetus Ocean

A pebbly gritstone–microconglomerate outcrop at Trainor's Rocks in the Mourne Mountains is one of the youngest ( c . 430 Ma) coarse clastic units within the Ordovician–Silurian Southern Uplands–Down–Longford Terrane. The c . 400 m by 1 km outcrop lies within fine-grained Hawick Group (Wenlock) strata, and is rich in extraformational clasts including granite, rhyolite, andesite, basalt, vein quartz and metamorphic rocks, plus intraformational rip-up clasts of mudstone. Detrital zircons, analysed by sensitive high-resolution ion microprobe (SHRIMP), yield predominantly Ordovician U–Pb ages of 450–490 Ma, peaking at c . 470 Ma, coincident with arc-related magmatism in the Midland Valley Terrane. Whole-rock geochemical data are consistent with derivation from a calc-alkaline continental arc, with clast provenance matching 473–464 Ma arc volcanic and intrusive rocks from the Tyrone Igneous Complex. A small proportion of analysed zircons have Proterozoic and Neoarchean ages typical of sediments derived from the Dalradian Supergroup (Grampian Terrane). The youngest zircon analysed, 435 ± 8 Ma, may indicate that magmatism continued during closure of Iapetus in the Llandovery. In these samples there is no evidence for Gondwana-derived sediment. The influx of detritus from the volcanic arc–Laurentian hinterland suggests episodic tectonic unroofing in response to syndepositional strike-slip movements.

Geochemical evaluation and hazard indices due to radioactive minerals associated with granitic areas

The present study employed statistical methods to evaluate the possible radiological hazards linked to granitic rocks-bearing mineralization in the ELgarra region of Egypt. The geological structures influence the occurrence of uranium mineralization in this area and are primarily associated with altered granites. Gamma-ray spectrometry was utilized to examine the quantities of 238U, 232Th, and 40K in granitic rock samples. The recorded levels of radioisotope activity concentrations in the analyzed regions ranged from 374 to 1740 Bq.kg−1238U, with an average of 1018 Bq.kg−1. For 232Th, the range was between 71 and 163 Bq.kg−1, with an average of 119 Bq.kg−1. Lastly, for 40K, the range was 756–1789 Bq.kg−1, with an average of 1212 Bq.kg−1. The detected levels of 238U, 232Th, and 40K in the examined rock samples were observed to exceed the permissible limits of 35, 45, and 412 Bq.kg−1, respectively. The primary radiological risks linked to these granitic rocks were attributed to the gamma rays released by the radioactive elements. Estimations of the radiological hazards in the granitic rocks were made, and statistical approaches were utilized to demonstrate the associations among radionuclides and radiological factors. The assessment confirmed that uranium, potassium, and their respective minerals in the granitic rocks were the key factors contributing to the radiological risks. As a result, the study determined that the granite rocks found in the study area needed precautions to be taken due to their high levels of radioactivity.