Good Stability Research Articles

Disulfidptosis-related Protein RPN1 May be a Novel Anti-osteoporosis Target of Kaempferol.

Osteoporosis (OP) is an age-related skeletal disease. Kaempferol can regulate bone mesenchymal stem cells (BMSCs) osteogenesis to improve OP, but its mechanism related to disulfidptosis, a newly discovered cell death mechanism, remains unclear. The study aimed to investigate the biological function and immune mechanism of disulfidptosis- related ribophorin I (RPN1) in OP and to experimentally confirm that RPN1 is the target for the treatment of OP with kaempferol. Differential expression analysis was conducted on disulfide-related genes extracted from the GSE56815 and GSE7158 datasets. Four machine learning algorithms identified disease signature genes, with RPN1 identified as a significant risk factor for OP through the nomogram. Validation of RPN1 differential expression in OP patients was performed using the GSE56116 dataset. The impact of RPN1 on immune alterations and biological processes was explored. Predictive ceRNA regulatory networks associated with RPN1 were generated via miRanda, miRDB, and TargetScan databases. Molecular docking estimated the binding model between kaempferol and RPN1. The targeting mechanism of kaempferol on RPN1 was confirmed through pathological HE staining and immunohistochemistry in ovariectomized (OVX) rats. RPN1 was abnormally overexpressed in the OP cohort, associated with TNF signaling, hematopoietic cell lineage, and NF-kappa B pathway. Immune infiltration analysis showed a positive correlation between RPN1 expression and CD8+ T cells and resting NK cells, while a negative correlation with CD4+ naive T cells, macrophage M1, T cell gamma delta, T cell follicular helper cells, activated mast cells, NK cells, and dendritic cells, was found. Four miRNAs and 17 lncRNAs associated with RPN1 were identified. Kaempferol exhibited high binding affinity (-7.2 kcal/mol) and good stability towards the RPN1. The experimental results verified that kaempferol could improve bone microstructure destruction and reverse the abnormally high expression of RPN1 in the femur of ovariectomized rats. RPN1 may be a new diagnostic biomarker in patients with OP, and may serve as a new target for kaempferol to improve OP.

A robust and biodegradable hydroxyapatite/poly(lactide-co-ε-caprolactone) electrospun membrane for dura repair.

Typically occurring after trauma or neurosurgery treatments, dura mater defect and the ensuing cerebrospinal fluid (CSF) leakage could lead to a number of serious complications and even patient's death. Although numerous natural and synthetic dura mater substitutes have been reported, none of them have been able to fulfill the essential properties, such as anti-adhesion, leakage blockage, and pro-dura rebuilding. In this study, we devised and prepared a series of robust and biodegradable hydroxyapatite/poly(lactide-co-ε-caprolactone) (nHA/PLCL) membranes for dura repair via an electrospinning technique. In particular, PLLA/PCL (80/20) was selected for electrospinning due to its mechanical properties that most closely resembled natural dural tissue. Studies by SEM, XRD, water contact angle and in vitro degradation showed that the introduction of nHA would destroy PLCL's crystalline structure, which would further affect the mechanical properties of the nHA/PLCL membranes. When the amount of nHA added increased, so did the wettability and in vitro degradation rate, which accelerated the release of nHA. In addition, the high biocompatibility of nHA/PLCL membranes was demonstrated by in vitro cytotoxicity data. The in vivo rabbit dura repair model results showed that nHA/PLCL membranes provided a strong physical barrier to stop tissue adhesion at dura defects. Meanwhile, the nHA/PLCL and commercial group's CSF had a significantly lower number of inflammatory cells than the control groups, validating the nHA/PLCL's ability to effectively lower the risk of intracranial infection. Findings from H&E and Masson-trichrome staining verified that the nHA/PLCL electrospun membrane was more favorable for fostering dural defect repair and skull regeneration. Moreover, the relative molecular weight of PLCL declined dramatically after 3 months of implantation, according to the results of the in vivo degradation test, but it retained the fiber network structure and promoted tissue growth, demonstrating the good stability of the nHA/PLCL membranes. Collectively, the nHA/PLCL electrospun membrane presents itself as a viable option for dura repair.

Stable and Durable Superhydrophobic Cotton Fabrics Prepared via a Simple 1,4-Conjugate Addition Reaction for Ultrahigh Efficient Oil-Water Separation.

Superhydrophobic materials used for oil-water separation have received wide attention. However, the simple and low-cost strategy for making durable superhydrophobic materials remains a major challenge. Here, this work reports that stable and durable superhydrophobic cotton fabrics can be prepared using a simple two-step impregnation process. Silica nanoparticles are surface modified by hydrolysis condensation of 3-aminopropyltrimethoxysilane (APTMS). 1,4-conjugate addition reaction between the acrylic group of cross-linking agent pentaerythritol triacrylate (PETA) and the amino group of octadecylamine (ODA) forms a covalent cross-linked rough network structure. The long hydrophobic chain of ODA makes the cotton fabric exhibit excellent superhydrophobic properties, and the water contact angle (WCA) of the fabric surface reaches 158°. The modified cotton fabric has good physical and chemical stability, self-cleaning, and anti-fouling. At the same time, the modified fabric shows excellent oil/water separation efficiency (98.16% after 20 cycles) and ultrahigh separation flux (15413.63 L m-2 h-1) due to its superhydrophobicity, superoleophilicity, and inherent porous structure. The method provides a broad prospect in the future diversification applications of oil/water separation and oil spill cleaning.

Cerium-doped Nickel SulfideNanospheres as EfficientCatalysts for Overall Water Splitting.

The development of non-precious metal electrocatalysts with excellent activity and durability for electrochemical water splitting has always been a goal. Transition metal sulfides are attractive electrocatalysts for both hydrogen evolution reaction (HER) and oxygen evolution reaction(OER). In this article, we designed and constructed efficient catalysts with multiple synergistic interactions and synthesized Ce-NiS2@NFnanosphere using a solvothermal method. Ce-NiS2@NF exhibits excellent HER performance, OER performance, and overall water splitting capability in alkaline electrolytes, demonstrating good stability. The addition of Ce influences the activity of the catalysts, attributed to the synergistic interactions creating more active sites and higher intrinsic activity through the introduction of Ce heteroatoms. Additionally, the self-supported conductive substrate promotes electron transfer, enhancing the intrinsic activity and active site density of the catalyst.This study provides an in-depth investigation into structural design and performance enhancement, offering ideas for designing efficient catalysts for overall water electrolysis. This work provides an in-depth study in terms of structural design performance enhancement and provides ideas for designing efficient alkaline bifunctional catalysts. Valuable insights have been provided in elucidating the intrinsic mechanism of the catalytic activity of cerium-doped nickel sulfidenanospheres,thus providing new guidance in the field of energy conversion technology.

Auxetic hybrid metamaterial with tunable elastic wave bandgap

Auxetic metamaterials have shown good stability and uniform deformation capabilities against influences (vibration, temperature change, load change), making them significant in maintaining and adjusting the bandgap of phonon crystals. The low-frequency and broadband are the important goals of phonon crystals. For most traditional re-entrant honeycomb structures (T-RHS), the bandgap range is narrow and tunability is poor. Here, an auxetic hybrid structure with tunable acoustic bandgap (AHS-T) consisting of periodic mass inclusions integrated with traditional re-entrant honeycomb and chiral hybrid is proposed. Aiming at investigating the tunability of the bandgap in the low-frequency range. Compared with T-RHS, the bandgap real-time adjustment and wider bandwidth of the AHS-T be realized during compression and tension. The numerical results show that the bandgap of the AHS-T can be flexibly tailored by reasonably adjusting the strain and geometrical configurations of AHS-T. The bandwidth of AHS-T can be increased to 87.1% when the bottom diameter Db and column height H of the scatterer are changed reasonably. Moreover, the deformation behavior of auxetic material has an auxiliary effect on expanding the bandwidth. Compared with the structure which is not subjected to load, the adjustable amplitude of the bandgap is 41%. The findings of this work provide a design idea for manipulating elastic waves in dynamic environment.

Molecularly imprinted polymer-coated silica microbeads for high-performance liquid chromatography.

Molecularly imprinted polymer (MIP)-based chromatographic separation materials, owing to their advantages of unique selectivity, low cost, suitable reproducibility, and acceptable stability, have attracted a great deal of research in different fields. In this investigation, a new type of MIP-coated silica (MIP/SiO2) separation material was developed using sulfamethoxazole as a template; the specific recognition ability of MIP and appropriate physicochemical properties (abundant Si-OH, suitable pore structure, good stability, etc.) of SiO2 microbeads were combined. The MIP/SiO2 separation materials were characterized carefully. Then, various compounds (such as sulfonamides, ginsenosides, nucleosides, and several pesticides) were used to comprehensively evaluate the chromatographic performances of the MIP/SiO2 column. Furthermore, the chromatographic performances of the MIP/SiO2 column were compared with those of other separation materials (such as non-imprinted polymer-coated silica, C18/SiO2, and bare silica) packed columns. The resolution value of all measured compounds was more than 1.51. The column efficiencies of 13 510 plates per meter (N m-1) for sulfamethoxazole, 11 600 N m-1 for ginsenoside Rd, and 10 510 N m-1 for 2'-deoxyadenosine were obtained. The acceptable results verified that the MIP/SiO2 column can be applied to separate highly polar drugs such as sulfonamides, ginsenosides, nucleosides, and pesticides.

Cyanogel-Induced Facile Synthesis of Palladium Hydride for Electrocatalytic Oxygen Reduction.

Palladium hydride (PdHx) is one of the well-known electrocatalytic materials, yet its synthesis is still a challenge through an energy-efficient and straightforward method. Herein, we propose a new and facile cyanogel-assisted synthesis strategy for the preparation of PdH0.649 at a mild environment with NaBH4 as the hydrogen source. Unlike traditional inorganic Pd precursors, the unique Pd-CN-Pd bridge in Pdx[Pd(CN)4]y ⋅ aH2O cyanogel offers more favourable spatial sites for insertion of H atoms. The characteristic three-dimensional backbone of cyanogel also acts as a support scaffold resulting in the interconnected network structure of PdH0.649. Due to the incorporation of H atoms and interconnected network structure, the PdH0.649 achieves a high half-wave potential of 0.932 V, a high onset potential of 1.062 V, and a low activation energy, as well as a long-term lifetime for oxygen reduction reaction. Theoretical calculation demonstrates a downshift of the d-band centre of Pd in PdH0.649 owing to the dominant Pd-H incorporation that weakens the binding energies of the *OH intermediate species. Zn-air batteries (ZAB) based on PdH0.649 exhibits high power density, competitive open circuit voltage, and good stability, exceeding that of commercial Pt black. This work not only opens up a new avenue for the development of high-efficiency Pt-free catalysts but also provides an original approach and insight into the synthesis of PdHx.

Improving the Ionic Conductivity and Anode Interface Compatibility of LLZO/PVDF Composite Polymer Electrolytes by Compositional Tuning.

Utilizing aluminum-doped nano LLZO (Li6.28La3Zr2Al0.24O12) as the ceramic filler, we synthesized and optimized LLZO/PVDF/LiClO4 composite polymer electrolytes (CPEs) to achieve high ionic conductivity and good interfacial stability with metallic lithium. The research examines how the PVDF grade and the mass ratio of PVDF to LiClO4 affect the ionic conductivity, lithium metal compatibility, and overall performance of CPEs. The CPE using Kynar PVDF 741 and a PVDF-to-LiClO4 mass ratio of 2:1 emerged as superior, displaying a high ionic conductivity at room temperature (0.12 mS/cm), the lowest activation energy (0.247 eV), an extensive electrochemical stability window (approximately 4.9 V), and robust mechanical strength. In tests with lithium metal symmetric cells, the membrane facilitated over 1000 h of stable cycling at 0.1 mA cm-2 and 0.1 mAh cm-2. Furthermore, when integrated into full solid-state lithium-metal batteries with LiFePO4 cathodes, it sustained more than 80% capacity retention across 500 charge/discharge cycles at a rate of 0.5 C with constantly high Coulombic efficiencies above 99.8%, underscoring its exceptional durability and efficiency. This research provides a practical framework and benchmarks for developing LLZO/PVDF-based CPEs with high ionic conductivity and enhanced stability against lithium metals.

Efficient recovery of phosphorus and iron from the lithium extraction slag by the leaching precipitation method

ABSTRACT The key to recovering waste LiFePO4(LFP) is the recovery of lithium; however, the effective and synchronous recovery of phosphorus and iron resources still needs to be achieved. In this paper, a new process was proposed for recovering phosphorus and iron from the lithium extraction slag (LES) of waste LFP by the leaching and precipitation method. Based on the thermodynamic analysis of Fe3+ and PO4 3− and XRD results, the experimental conditions were discussed in detail. There were three stable regions when the solution pH value was from 0 to 5, no precipitation at pH = 0–0.664, stable existence of FePO4(s) at pH = 0.664–1.203, coexistence of FePO4(s), and AlPO4(s) when pH > 1.203, respectively. The leaching solution of LES by hydrochloric acid could prepare FePO4·2H2O under the following optimal conditions: 95°C, pH 1.5, feeding speed 1.5 mL min−1. The synthesised iron phosphate was pure and distributed in flakes. Additionally, the discharge capacity of the LiFePO4/C prepared by the regenerative FePO4·2H2O was 147 mAh g−1 at 0.1 C and showed good cycle stability at 1 C. The method not only recovers FePO4 from the LES but also shows simple operation and high efficiency.

A fluorescent probe based on cyclochalcone for detecting peroxynitrite.

A novel cyclic chalcone fluorescent probe C-PN was synthesized to detect ONOO-. After reaction with peroxynitrite, the double bond of C-PN in the cyclic chalcone structure was disconnected, which caused the change of intramolecular charge transfer (ICT) effect, emitting blue fluorescence and quenching orange red fluorescence. Visible to the naked eye, the color of the probe solution changed. The probe showed low sensitivity (detection limit = 20.2nm), short response time (less than 60s) at low concentration of ONOO-, good visibility, and good selectivity and stability for ONOO-.

DL-Serine Hydrazide Hydrochloride Multiple-site Synergy Induced Effective and Stable Formamidine-Rich Perovskite Solar Cells.

The efficiency and stability of solar cells are two key indicators that determine for the commercial feasibility of photovoltaic devices. Formamidine-cesium perovskite has been extensively investigated since its excellent thermal stability and has great potential in achieving high power conversion efficiency. However, during the aging process, especially under light conditions, formamidine-rich perovskites are prone to produce iodine, and the escape of iodine is one of the important factors leading to device degradation. Here, DL-Serine Hydrazide Hydrochloride containing the reducing group is introduced into the precursor solution of formamidine-cesium perovskite, which achieves multiple-site passivation. Hydrazine reacts with iodine to reduce it to iodine ions, inhibiting the escape of iodine. In addition, carbonyl groups and uncoordinated lead ions form coordination bonds to reduce defects. In the end, the perovskite solar cell with DL-Serine Hydrazide Hydrochloride added achieves a champion efficiency of 22.22%, and maintains 85.88% of the initial efficiency after continuous exposure under 1 sun for 7000 s at a relative humidity of ≈40%. Additionally, DL-Serine Hydrazide Hydrochloride added device shows good stability in air environments with relative humidity of 50%-60%. DL-Serine Hydrazide Hydrochloride improves the stability of formamidine-rich perovskite solar cells and provides a low-cost strategy for commercial development.

Porous carbon nanofiber/porphyrin-based metal organic frameworks/TiO2 nanoparticles ternary materials for selective detection and photoreduction of Cr(Ⅵ)

For the heavy metal ion Cr(Ⅵ), which is widely present in wastewater with acute toxicity, mutagenicity and carcinogenicity, we successfully constructed a ternary material of PCNFs/CuMOF/TiO2 for rapid detection and photoreduction of Cr(Ⅵ). The material has obvious advantages: on the one hand, ZIF-8/polyacrylonitrile (PAN) nanofibers and their derived porous carbon nanofibers (PCNFs) were synthesized by electrospinning and high temperature carbonization, which provided a loading platform for CuMOF and TiO2, effectively inhibited the agglomeration of CuMOF and TiO2, and ensured the exposure of active sites. Meanwhile, its excellent conductivity can promote the effective migration of photogenerated carriers in the photocatalytic process. On the other hand, CuMOF constructed with tetra-carboxyphenylporphyrin (TCPP) as the linking arm and Cu(NO3)2·3 H2O as the metal node was directly loaded on the surface of porous carbon nanofibers (PCNFs), and then TiO2 nanoparticles were introduced by hydrothermal method. CuMOF ensures the responsiveness of the composite to visible light. Moreover, the energy level structure of TiO2 matches with CuMOF, which effectively inhibits the recombination of photogenerated electron-hole pairs (e--h+). The results show that the colorimetric detection of Cr(Ⅵ) was achieved by using 3,3′,5,5′-tetramethylbenzidine (TMB) as the sensing probe. The method was highly selective for Cr(Ⅵ) ions with a limit of detection (LOD) of 24.1 nM. Encouragingly, PCNFs/CuMOF/TiO2 was further used as a photocatalyst. The reduction rate of Cr(Ⅵ) under visible light irradiation is 96.1 % in 60 min. The active species trapping experiments confirm the key role of e- photocatalytic reduction, upon which a possible photocatalytic mechanism is proposed. The degradation rate of Cr(Ⅵ) is still 86.4 % after the five times cycle, and the good stability and reproducibility allow it to be used as a potential green photocatalyst for the conversion of Cr(Ⅵ) to Cr(Ⅲ).

Continuous and Controllable Preparation of Sodium Alginate Hydrogel Tubes Guided by the Soft Cap Inspired by the Apical Growth of the Plant.

Hydrogel tubes made of sodium alginate (SA) have potential applications in drug delivery, soft robots, biomimetic blood vessels, tissue stents, and other fields. However, the continuous preparation of hollow SA hydrogel tubes with good stability and size control remains a huge challenge for chemists, material scientists, and medical practitioners. Inspired by the plant apical growth strategy, a new method named soft cap-guided growth was proposed to produce SA hydrogel tubes. Due to the introduction of inert low gravity substances, such as air and heptane, into the extrusion needle in front of calcium chloride solution to form a soft cap, the SA hydrogel tubes with controllable sizes were fabricated rapidly and continuously without using a template through a negative gravitropism mechanism. The SA hydrogel tubes had good tensile strength, high burst pressure, and good cell compatibility. In addition, hydrogel tubes with complex patterns were conveniently created by controlling the motion path of a soft cap, such as a rotating SA bath or magnetic force. Our research provided a simple innovative technique to steer the growth of hydrogel tubes, which made it possible to mass produce hydrogel tubes with controllable sizes and programmable patterns.

One-Step Synthesis of Chitosan Hydrogel as Electrochemical Chemosensor for Hydrogen Sulfide Detection in Pregnancy-Induced Hypertension Syndrome Serum Sample.

Oxidative stress caused by pregnancy-induced hypertension syndrome significantly affects the health of pregnant women. Hydrogen sulfide is a typical gaseous signal molecule against oxidative stress, and it is of profound significance to develop a detection method. In this study, a stimuli-responsive hydrogel was constructed based on the coordination and bonding principle of metal ions and chitosan (CS) to realize the quantitative detection of hydrogen sulfide (H2S). The chain of CS contains a large number of amino groups and hydroxyl groups, which can form the coordination structure with Cu2+, triggering CS to form a stable hydrogel. The hydrogel can be formed within about 5 s, which has the characteristics of rapid preparation. In the presence of target H2S, the cross-linking agent Cu2+ in the hydrogel can compete out, resulting in the collapse of the hydrogel and the release of the electrochemical probe. By detecting the concentration of the released electrochemical probe, the quantitative detection of H2S can be achieved. The prepared hydrogel has a good linear relationship with the concentration of H2S from 1 μM to 60 μm. At the same time, the hydrogel has good specificity and stability, and it can be applied to the detection of H2S in serum samples.

Niosome-Based Hydrogel of Quince Extract: A Promising Strategy for Expedited Full-thickness Wound Healing in Rat.

The regeneration of tissue damage involves a series of molecular and cellular events that can be mediated by various natural compounds. Recent studies have highlighted the anti-inflammatory, anti-ulcer, and skin-protecting properties of Cydonia oblonga (Quince), which are mainly attributed to phenolic compounds. These compounds may have some drawbacks when targeting wound applications, including low bioavailability at the wound site. Moreover, to overcome these limitations, surfactant-based nanovesicular systems have been developed as carriers of such compounds for wound healing. This study aimed to highlight the possible therapeutic potential of niosome-based hydrogel from Quince extract to stabilize and deliver the related bioactive compounds to full-thickness wounds in rats. The niosomal hydrogel was prepared using a thin-film hydration method with the fruit extract (70% methanol). The formulation was optimized by evaluating size, zeta potential, dispersion index, and drug encapsulation efficiency. Full-thickness wounds were created on the dorsal cervical area of Wistar rats, and histopathological analysis of biopsy specimens was conducted on the 12th day of treatment. Under the study conditions, niosomal hydrogel displayed good physicochemical stability. Histopathological findings demonstrated that niosomal gel promoted angiogenesis, fibroblast maturation, collagen deposition, keratinization, and epidermal layer formation more effectively than control and hydrogel base. Furthermore, niosomal gel treatment markedly reduced inflammation. The total phenol concentration was determined to be 13.34 ± 0.90 mg gallic acid equivalents per gram of dried extract. The niosomal hydrogel containing C. oblonga extract shows potential as a novel approach for wound healing, warranting further investigation in this field.

The cores regulation of paraffin-chitosan phase change microcapsules for constant temperature building

Phase change materials (PCMs) can store and release latent heat under the designed phased change temperature and have received substantial interest for energy conservation and thermal control purposes. The use of PCMs in the construction of constant temperature buildings can improve the comfortable environment and save more energy. However, the leakage of PCMs during phase change process limits the application of PCMs. In this paper, a series of PCMs microcapsules with controllable core numbers is synthesized with paraffin (37 ℃) as the core and cross-linked chitosan as the wall. The single-core phase-change microcapsules (S−PCM) and multicore phase-change microcapsules (M−PCM) were prepared by adjusting the preparation condition. The latent heat of S−PCM and M−PCM are 61.4 mJ mg−1 and 50.1 mJ mg−1, respectively. The S-PCM and M−PCM display good stability without paraffin leakage. In addition, the composite blocks of gypsum and S−PCM (GSCM) and M−PCM (GMCM) were prepared and the thermoregulatory effection was investigated, where the surface temperature of GSCM was 5–10 ℃ lower than that of pure gypsum block. PCMs may also have broad application space in electronics, cold chain, and other industries.

Highly Active and Selective Fe‐MOF/2D‐Montmorillonite Photocatalyst via in‐situ Preparation for Hydroxylation of Benzene to Phenol

The photocatalytic hydroxylation of benzene to phenol is an important reaction for the synthesis of fine chemicals and pharmaceuticals. However, the development of efficient and selective photocatalysts for this reaction remains a challenge. Here, a highly active and selective Fe‐MOF/2D‐montmorillonite (Fe‐MOF/MMT) photocatalyst was prepared via an in‐situ method for the hydroxylation of benzene to phenol under the visible light irradiation. The Fe‐MOF/MMT composite exhibited excellent photocatalytic performance, with phenol yield of 30.3% and benzene selectivity of 96.5% within 4 hours. The high activity and selectivity of the Fe‐MOF/MMT photocatalyst were attributed to the synergistic effect between the Fe‐MOF and MMT, as well as the unique 2D structure of MMT, which facilitated charge separation and transfer. The Fe‐MOF/MMT composite also showed good stability and re‐used without significant decrease of activity. This study demonstrated that the potential of Fe‐MOF/MMT as a highly efficient and selective photocatalyst for the hydroxylation of benzene to phenol and provided an insight into the design of advanced photocatalysts for sustainable chemical synthesis.

Acidic Nanoparticles Restore Lysosomal Acidification and Rescue Metabolic Dysfunction in Pancreatic β-Cells under Lipotoxic Conditions.

Type 2 diabetes (T2D), a prevalent metabolic disorder lacking effective treatments, is associated with lysosomal acidification dysfunction, as well as autophagic and mitochondrial impairments. Here, we report a series of biodegradable poly(butylene tetrafluorosuccinate-co-succinate) polyesters, comprising a 1,4-butanediol linker and varying ratios of tetrafluorosuccinic acid (TFSA) and succinic acid as components, to engineer lysosome-acidifying nanoparticles (NPs). The synthesized NPs are spherical with diameters of ≈100 nm and have low polydispersity and good stability. Notably, TFSA NPs, which are composed entirely of TFSA, exhibit the strongest degradation capability and superior acidifying properties. We further reveal significant downregulation of lysosomal vacuolar (H+)-ATPase subunits, which are responsible for maintaining lysosomal acidification, in human T2D pancreatic islets, INS-1 β-cells under chronic lipotoxic conditions, and pancreatic tissues of high-fat-diet (HFD) mice. Treatment with TFSA NPs restores lysosomal acidification, autophagic function, and mitochondrial activity, thereby improving the pancreatic function in INS-1 cells and HFD mice with lipid overload. Importantly, the administration of TFSA NPs to HFD mice reduces insulin resistance and improves glucose clearance. These findings highlight the therapeutic potential of lysosome-acidifying TFSA NPs for T2D.

Heterogeneous electro-Fenton removal of polyacrylamide in aqueous solution over CoFe2O4 catalyst

ABSTRACT Polyacrylamide (PAM) in environmental water has become a major problem in water pollution management due to its high molecular mass, high viscosity and non-absorption by soil. CoFe2O4 with strong magnetic properties was prepared by solvent-thermal synthesis method and used as the catalyst for the removal on PAM in heterogeneous Electro-Fenton (EF) system. It showed that the removal efficiency of PAM by the heterogeneous EF system using CoFe2O4 catalyst was 92.01% at pH 3 after 120 min. Further studies indicated that ·OH was the most significant active species for the removal of PAM, and the contribution of ·O2− and SO4·− for the removal of PAM was less than 15%. The reusability test and XRD, XPS, FTIR analyses proved that the catalyst had good stability. After a repeated use for five times, the catalyst still had a high PAM removal rate and stable structure. The valence distribution and functional groups of the phase components of the catalyst did not change significantly before and after the reaction. The possible mechanism of catalyst activation of H2O2 was deduced by mechanism investigation. The CoFe2O4 is an efficient and promising catalyst for the removal of PAM wastewater.

Filter-Free UV Photodetectors Based on Unipolar Barrier Van der Waals α-In2Se3/h-BN Heterostructures.

Visible-blind ultraviolet (UV) light detection has a wide application range in scenes like space environment monitoring and medical imaging. To realize miniaturized UV detectors with high performance and high integration ability, new device structures without bulky light filters need to be developed based on advanced mechanisms. Here the unipolar barrier van der Waals heterostructure (UB-vdWH) photodetector is reported that realizes filter-free visible-blind UV detection with good stability, robustness, selectivity, and high detection performance. The UB-vdWH shows a responsivity of 2452AW-1, a photo on-off ratio of 2.94×105 and a detectivity of 1.26×1015Jones as a UV detector, owing to the intentionally designed barrier height that suppresses dark current and photoresponse to visible light during the transport process. The good performance remains intact during 104 test cycles or even under high temperatures, which proves the stability, and robustness of the UB-vdWH, thus shows the huge potential for a wider application range.