Good Antibacterial Properties Research Articles

Zwitterion-Modified MXene Quantum Dot as a Nanocarrier for Traditional Chinese Medicine Sanguinarine Delivery and Its Application for Photothermal-Chemotherapy Synergistic Antibacterial and Wound Healing.

The nanomaterialization of traditional Chinese medicine (TCM) has aroused widespread interest among researchers. Sanguinarine (SAN) is a kind of TCM with good antibacterial properties, which has important applications in anti-infection of wounds. Additionally, the combination of photothermal therapy and chemotherapy can overcome bacterial resistance, further improving bactericidal and wound healing efficiency. In this paper, we prepared an antibacterial agent by loading SAN on the zwitterion-modified MXene quantum dot nanocarrier (SAN@AHEP@Ta4C3), realizing pH/NIR controlled drug release and photothermal/chemotherapy synergistic antibacterial and wound healing. The particle size of SAN@AHEP@Ta4C3 is about 120 nm, and it has a good water solubility and stability. In addition, it also has excellent photothermal conversion performance (η = 39.2%), which can effectively convert light energy into heat energy under near-infrared (NIR) laser irradiation, further promoting drug release and achieving bactericidal effects by synergistic chemotherapy and photothermal therapy. The in vitro and in vivo experiments show that SAN@AHEP@Ta4C3 exhibits an excellent antibacterial effect against Staphylococcus aureus and Escherichia coli, and it can effectively promote the wound healing of mice. Moreover, the SAN@AHEP@Ta4C3 also has good biocompatibility and has no side effects on normal tissue and organs. This work introduces a multifunctional antibacterial agent based on TCM and hot-spot material MXene, which will have considerable application prospects in biomedical fields.

Research on Formulation and Evaluation of Antibacterial Herbal Mouthwash

The objective of present work is to formulate and evaluate herbal mouthwash and to evaluate its effectiveness against microbial load of oral cavity. The plant materials were collected and extracted for water soluble ingredients. Prepared mouthwash was further evaluated for its physicochemical properties and antimicrobial activity. The present mouthwash possesses a good antibacterial property. The results of stability study also confirm the effectiveness of preparation. Present mouthwash is a liquid preparation which normally contains antibacterial and antiseptic agents. Commercially available mouthwash formulations are often medicated and contain chemicals that may elicit adverse effects to the users. A mouthwash may be recommended for its efficacy in preventing dental caries other oral conditions due to its antimicrobial, anti-inflammatory properties

Environmental Dyeing and Functionalization of Silk Fabrics with Natural Dye Extracted from Lac.

Most traditional synthetic dyes and functional reagents used in silk fabrics are not biodegradable and lack green environmental protection. Natural dyes have attracted more and more attention because of their coloring, functionalization effects, and environmental benefits. In this study, natural dyes were extracted from lac and used for coloring and functionalization in silk fabrics without any other harmful dyes. The extraction conditions were studied and analyzed by the univariate method. The optimal extraction process was that the volume ratio of ethanol to water was 60:40 with a solid-liquid ratio of 1:10, and reacting under the neutrality condition for 1 h at 70 °C. Silk fabric can be dyed dark owing to the certain lifting property of lac. After being dyed by Al3+ post-medium, the levels of the washing fastness, light fastness, and friction fastness of silk fabric are all above four with excellent fastness. The results show that the dyed silk fabrics have good UV protection, antioxidation, and antibacterial properties. The UV protection coefficient UPF is 42.68, the antioxidant property is 98.57%, and the antibacterial property can reach more than 80%. Therefore, the dyeing and functionalization of silk fabrics by utilizing naturally lac dyes show broad prospects in terms of the application of green sustainable dyeing and functionalization.

Fabrication of antibacterial bone scaffold based on carbonate-substituted hydroxyapatite containing magnesium from black sea urchin (Arbacia lixula) shells reinforced with polyvinyl alcohol and gelatin

Carbonate-substituted hydroxyapatite containing magnesium (Mg–C-HAp) was introduced through dissolution-precipitation treatment of hydroxyapatite containing magnesium (Mg-HAp) based on a black sea urchin (arbacia lixula) shells as novel biogenic materials. Based on chemical composition analysis, the Mg–C-HAp formed A- and B-type CHAp, which contained high carbonate ions. The Ca/P ratio of Mg–C-HAp was 1.707, very close to the biological bone apatite of 1.71. The Mg content in Mg–C-HAp was also relatively high, with the Mg/(Ca + Mg) ratio of 0.139, which is beneficial for antibacterial agents. The morphology of Mg–C-HAp showed particles with nanosize that provide a large surface area of ion promotion. The antibacterial test revealed that the Mg–C-HAp performed high antibacterial activity against Pseudomonas aeruginosa. The Mg–C-HAp-based porous scaffolds were then fabricated using the freeze-drying method with variations of polyvinyl alcohol (PVA) and gelatin fraction. According to the physicochemical analysis, the addition of PVA and gelatin in the scaffold structure decreased the crystallinity of the Mg–C-HAp/PVA/Gel scaffold. This lower crystallinity indicates high biodegradability, which is good for new bone growth. The macropores of the Mg–C-HAp/PVA/Gel scaffold were appropriate for new bone and blood vessel formation. The micropores of the Mg–C-HAp/PVA/Gel scaffold can be a medium for cells to grow. The microporosity of the Mg–C-HAp/PVA/Gel scaffold was also suitable for cell nutrient promotion. The compressive strength of the Mg–C-HAp/PVA/Gel scaffold was sufficient for bone regeneration. The Mg–C-HAp/PVA/Gel scaffold demonstrated high antibacterial activity against P. aeruginosa, so the Mg–C-HAp/PVA/Gel scaffold can maintain the role of Mg and carbonate content for antibacterial purposes. The good physicochemical, mechanical, and antibacterial properties of the Mg–C-HAp/PVA/Gel scaffold represented its suitable characteristics for antibacterial bone scaffolds.

Borate bonds-containing pH-responsive chitosan hydrogel for postoperative tumor recurrence and wound infection prevention

Chitosan has been widely used in biomedical fields due to its good antibacterial properties, excellent biocompatibility, and biodegradability. In this study, a pH-responsive and self-healing hydrogel was synthesized from 3-carboxyphenylboronic acid grafted with chitosan (CS-BA) and polyvinyl alcohol (PVA). The dynamic boronic ester bonds and intermolecular hydrogen bonds are responsible for the hydrogel formation. By changing the mass ratio of CS-BA and PVA, the tensile stress and compressive stress of hydrogel can controlled in the range of 0.61 kPa - 0.74 kPa and 295.28 kPa - 1108.1 kPa, respectively. After doping with tannic acid (TA)/iron nanocomplex (TAFe), the hydrogel successful killed tumor cells through the near infrared laser-induced photothermal conversion and the TAFe-triggered reactive oxygen species generation. Moreover, the photothermal conversion of the hydrogel and the antibacterial effect of CS and TA give the hydrogel a good antibacterial effect. The CS-BA/PVA/TAFe hydrogel exhibit good in vivo and in vitro anti-tumor recurrence and antibacterial ability, and therefore has the potential to be used as a powerful tool for the prevention of local tumor recurrence and bacterial infection after surgery.

Continuous preparation and antibacterial mechanisms of biodegradable polylactic acid/nano-zinc oxide/additives antibacterial non-wovens

Biodegradable polylactic acid (PLA)/nano‑zinc oxide (ZnO)/additives non-woven slices were prepared by melt blending method. The effects of antibacterial agent nano-ZnO, antioxidant pentaerythrityl tetrakis-(3,5-di-tert-butyl-4-hydroxyphenyl)-propionate (1010), and chain extender multi-functional epoxy (ADR), on the melt flow rate, mechanical properties, thermal stabilities and micromorphology of the slices were investigated. The melt flow rate decreased from 26.94 g/10 min to 17.76 g/10 min, and the tensile strength increased from 10.518 MPa to 30.427 MPa with the increase of nano-ZnO and additives content. The slices were further spunbonded. The wettability and antibacterial properties of PLA/nano-ZnO/additives antibacterial non-wovens were studied, and the antibacterial action mechanism was clarified. The results showed that the biodegradable PLA/nano-ZnO/additives antibacterial non-wovens were prepared continuously successfully. The prepared non-woven fabrics exhibited good hydrophobicity and antibacterial properties. The mechanism study shows that zinc ion produced by nano-ZnO and photocatalytic reaction make the fabrics have good antibacterial activity at low nano-ZnO content. When nano-ZnO concentration reaches 1.5 wt%, the antibacterial rate against Escherichia coli and Staphylococcus aureus reaches 98.52 % and 98.13 %, respectively.

Degradation Behavior in Water of Electrospinning Ag-MOF/PLLA/PBS Membranes with Good Antibacterial and Filtration Properties

Degradation Behavior in Water of Electrospinning Ag-MOF/PLLA/PBS Membranes with Good Antibacterial and Filtration Properties

Antibacterial properties of synthesized Melaleuca cajuputi-leaf gold nanoparticles

Biosynthesized gold nanoparticles (AuNPs) were successfully synthesized by using Melaleuca cajuputi leaf extract, and their prospective antibacterial efficacy was assessed against Vibrio parahaemolyticus. TEM analysis revealed biosynthesized M. cajuputi gold nanoparticles (MC-AuNPs) were spherical in shape with a surface plasmon resonance (SPR) band observed at 535 nm and particle sizes ranging from 10–50 nm. The MC-AuNPs showed good antibacterial properties against V. parahaemolyticus with MIC and MBC values of 0.0075 g/mL.

Unlocking the Potential of Trans-Himalayan High-Altitude Seabuckthorn (Hippophae rhamnoides) Plants in the Green Synthesis of Silver Nanoparticles Against Drug-Resistant Foodborne Pathogens: A Step Towards Sustainable Food Safety Goals

Controlling foodborne pathogens is challenging due to the new emergence of antimicrobial resistance to conventional antimicrobials. Therefore, new alternative antimicrobials need to be developed to control foodborne pathogens and avoid microbial resistance. Furthermore, the potential of trans-Himalayan high-altitude seabuckthorn (Hippophae rhamnoides ) plants has not been explored much for the synthesis of silver nanoparticles having antibacterial properties. Hence, this study investigated the development of long-term stable silver nanomaterials using the aqueous extract of seabuckthorn leaves through a green-synthesis approach and evaluated their antibacterial efficacy. These synthesized nanomaterials were characterized along with their stability using UV spectrometry for lambda max ([Formula: see text]) characteristics. Further, the nanoparticles were evaluated for zeta potential (mV), polydispersity index, particle size distribution (nm), electrophoretic mobility ([Formula: see text]mcm/Vs) and conductivity (mS/cm). The seabuckthorn silver nanoparticles are of 260[Formula: see text]nm size and stable (−15[Formula: see text]mV zeta potential) with good antioxidant and antibacterial properties against two typical food pathogens, e.g., Escherichia coli (MTCC 3222) and Salmonella typhimurium (MTCC 3224). Hence, this study developed an eco-friendly, rapid, low-cost green synthesis method for the development of seabuckthorn-coated, stable silver nanoparticles with good antibacterial activity against foodborne pathogens.

Synthesis, Structure and Antibacterial Activity of Two Novel Coordination Polymers Based on N,N'-bis(4-carbozvlbenzvl)-4-aminotoluene and Heterocyclic Ligand against S. aureus.

As the use of antibiotics increases, the increasing resistance of bacteria is the main reason for the reduced efficiency of antibacterial drugs, making the research of new antibacterial materials become new hot spot. In this article, two novel coordination polymers (CPs), namely, [Cd2(L)2(bibp)2]n (1) and [Ni(L)(bib)]n (2), where H2L = N,N'-bis(4-carbozvlbenzvl)-4-aminotoluene, bibp = 4,4'-bis(imidazol-1-yl)biphenyl, and bib = 1,3-bis(1-imidazoly)benzene, have been synthesized under solvothermal and hydrothermal condition. Structural clarification was performed through infrared spectrum and single-crystal X-ray diffraction analysis, while thermal analysis and XRD technology were used for the performance assessment of compounds 1 and 2. In addition, antibacterial performance experiments showed that compounds 1 and 2 have certain selectivity in their antibacterial properties and have good antibacterial properties against S. aureus. As the concentration of the compound increases, the inhibitory effect gradually strengthens, and when the concentration of the compound reaches 500 μg/mL and 400 μg/mL, the concentration of the S. aureus solution no longer increases and has been completely inhibited.

The Effectiveness Mechanisms of Carbon Nanotubes (CNTs) as Reinforcements for Magnesium-Based Composites for Biomedical Applications: A Review.

As a smart implant, magnesium (Mg) is highly biocompatible and non-toxic. In addition, the elastic modulus of Mg relative to other biodegradable metals (iron and zinc) is close to the elastic modulus of natural bone, making Mg an attractive alternative to hard tissues. However, high corrosion rates and low strength under load relative to bone are some challenges for the widespread use of Mg in orthopedics. Composite fabrication has proven to be an excellent way to improve the mechanical performance and corrosion control of Mg. As a result, their composites emerge as an innovative biodegradable material. Carbon nanotubes (CNTs) have superb properties like low density, high tensile strength, high strength-to-volume ratio, high thermal conductivity, and relatively good antibacterial properties. Therefore, using CNTs as reinforcements for the Mg matrix has been proposed as an essential option. However, the lack of understanding of the mechanisms of effectiveness in mechanical, corrosion, antibacterial, and cellular fields through the presence of CNTs as Mg matrix reinforcements is a challenge for their application. This review focuses on recent findings on Mg/CNT composites fabricated for biological applications. The literature mentions effective mechanisms for mechanical, corrosion, antimicrobial, and cellular domains with the presence of CNTs as reinforcements for Mg-based nanobiocomposites.

Preparation and good antibacterial properties of self-assembled P(AA-AM)/CA/GA fiber membrane by electrospinning

To reduce mortality rate caused by life-threatening bacterial infections, advanced antibacterial materials have attracted widespread attention from researchers worldwide. In this study, the antibacterial P(AA-AM)/CA/GA nanofiber membranes with pH-responsive properties were successfully prepared by facile electrospinning technology. A series of characterizations of the obtained nanofiber membranes showed the addition of P(AA-AM) improves the surface wettability of the as-spun fibers in comparison to those of CA and CA/GA nanofiber membranes. High-temperature treatment was found to enhance the mechanical properties of the P(AA-AM)/CA/GA membranes due to the crosslinking reactions. The prepared P(AA-AM)/CA/GA nanofiber membrane exhibits a pH-responsive effect which is evident by the change in GA’s release rate in solutions with different pH values. The cellulose acetate (CA) spinning nanofiber structure formed by P(AA-AM) coated GA also extended the release process of GA and improved the antibacterial timeliness of nanofiber membranes. The antibacterial experiments on E. coli and S. aureus showed that the electrospun nanofiber membranes containing GA had potent antibacterial properties, which were further enhanced by increasing the GA content in the P(AA-AM)/CA/GA blends. This study provides an insight into the design and preparation of pH-sensitive antibacterial materials using facile electrospinning technology.

In Situ Fabrication of Silver Nanoparticle-Decorated Polymeric Vesicles for Antibacterial Applications.

Silver/polymeric vesicle composite nanoparticles with good antibacterial properties were fabricated in this study. Silver nanoparticles (AgNPs) were prepared in situ on cross-linked vesicle membranes through the reduction of silver nitrate (AgNO3) using polyvinylpyrrolidone (PVP) via coordination bonding between the Ag+ ions and the nitrogen atoms on the vesicles. X-ray diffraction (XRD), ultraviolet-visible spectroscopy (UV-vis), and transmission electron microscopy (TEM) analyses confirmed the formation of AgNPs on the vesicles. The antibacterial test demonstrated good antibacterial activity against both Gram-negative bacteria (Escherichia coli) and Gram-positive bacteria (Staphylococcus aureus) for the produced AgNP-decorated vesicles. The minimum inhibitory concentration (MIC) values of the AgNP-decorated vesicles for E. coli and S. aureus were 8.4 and 9.6 μg/mL, respectively. Cell viability analysis on the A549 cells indicated that the toxicity was low when the AgNP concentrations did not exceed the MIC values, and the wound healing test confirmed the good antibacterial properties of the AgNP-decorated vesicles.

Antioxidant and antibacterial hydrogel formed by protocatechualdehyde–ferric iron complex and aminopolysaccharide for infected wound healing

To better treat bacteria-infected wounds and promote healing, new wound dressings must be developed. In this study, we obtained PA@Fe by chelating iron trivalent ions (Fe3+) with protocatechualdehyde (PA), which has a catechol structure. Subsequently, we reacted it with ethylene glycol chitosan (GC) via a Schiff base reaction and loaded vancomycin to obtain an antibacterial Gel@Van hydrogel with a photothermal response. The as-prepared Gel@Van hydrogel exhibited good injectability, self-healing, hemostasis, photothermal stability, biocompatibility, and antioxidant and antibacterial properties. Moreover, Gel@Van hydrogel achieved highly synergistic antibacterial efficacy through photothermal and antibiotic sterilization. In a mouse skin-damaged infection model, Gel@Van hydrogel had a strong ability to promote the healing of methicillin-resistant Staphylococcus aureus (MRSA)-infected wounds, indicating the great potential application value of Gel@Van hydrogel in the field of treating and promoting the healing of infected wounds.

Electrospun polylactic acid nanofibers membrane with copper ion-loaded clay nanotubes for fresh-keeping packaging

The plastics derived from fossil fuels for food packaging results in serious environmental problems. Developing environment-friendly materials for food packaging is urgent and essential. In this study, polylactic acid (PLA) composite nanofibers membranes were prepared with good biocompatibility and antibacterial property. Cu2+ loaded in the natural halloysite nanotubes (HNTs) was used for the antibacterial agent. Cu2+ was loaded in the HNTs and was confirmed by the X-ray photoelectron spectroscopy (XPS). PLA nanofibers with different HNTs-Cu content were continuous nanofibers with the nanoscale range. HNTs-Cu entered into the nanofiber successfully. Thermal analysis results showed composite nanofibers had good thermal stability. Composite nanofiber membranes had the good hydrophobic property. HNTs-Cu improved the mechanical property of composite nanofibers than pure PLA nanofibers. Tensile strength and elasticity modulus of composite nanofibers with 4 % HNTs-Cu content were the most outstanding. L929 cells were cultured on the nanofiber membranes for biocompatibility evaluation. Cell viability of nanofiber membranes was above the 90 %. Cell live/dead staining results showed L929 cells was seldom dead on the nanofiber membranes. PLA/HNTs-Cu nanofiber membranes exhibited excellent antibacterial effects on S. aureus and E. coli. The inhibitory rates against S. aureus and E. coli were 98.31 % and 97.80 % respectively. The fresh-keeping effects of nanofiber membranes were evaluated by the strawberry preservation. Strawberries covered by nanofiber membranes exhibited better appearance, lower weight loss and higher firmness than control, PLA and PLA/HNTs groups. It promised that PLA/HNTs-Cu composite nanofiber membranes have the significant potential application for active food packaging.

Antibacterial polyamide nanofiltration membranes with intermediate layers of quaternized cellulose nanocrystal for Mg2+/Li+ separation

Positively charged and non-toxic intermediate layers are highly desirable for the construction of nanofiltration membranes in the field of Mg2+/Li+ separation. Herein, we have prepared dual-electric layer nanofiltration membranes via introducing positively charged quaternized cellulose nanocrystals (Q-CNC) beyond the negatively charged polyamide skin layers. On the one hand, the strong interactions between Q-CNC and piperazine (PIP) could regulate the thickness, roughness, and residual groups of the polyamide (PA) layers, resulting in improved water flux. On the other hand, the Q-CNC has lots of positive charges which are beneficial for enhancing the rejections of negatively charged polyamide skin layers towards divalent cations since the Donnan and electrostatic effects are long-range forces. Moreover, this effect could be amplified by reducing the thickness of skin layers or decreasing the contents of residual carboxyl groups via adjusting the monomer concentrations. The obtained nanofiltration membranes possess high water flux of 51 L/m2/h/bar, and rejection for MgCl2 of 86 %. The separation factor of Mg2+/Li+ is 29 when the Mg2+/Li+ mass ratio in the feed solution is 20:1. Moreover, the nanofiltration membrane with Q-CNC intermediate layers (QNFM) has good antibacterial properties, showing great potential in the fields of lithium extraction from salt lakes.

Bacterial cellulose-based hydrogel with regulated rehydration and enhanced antibacterial activity for wound healing

Bacterial cellulose (BC) hydrogels are promising medical biomaterials that have been widely used for tissue repair, wound healing and cartilage engineering. However, the high water content of BC hydrogels increases the difficulty of storage and transportation. Moreover, they will lose their original hydrogel structure after dehydration, which severely limits their practical applications. Introducing the bio-based polyelectrolytes is expected to solve this problem. Here, we modified BC and combined it with quaternized chitosan (QCS) via a chemical reaction to obtain a dehydrated dialdehyde bacterial cellulose/quaternized chitosan (DBC/QCS) hydrogel with repeated swelling behavior and good antibacterial properties. The hydrogel can recover the initial state on the macro scale with a swelling ratio over 1000 % and possesses excellent antimicrobial properties against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) with a killing rate of 80.8 % and 81.3 %, respectively. In addition, the hydrogel has excellent biocompatibility, which is conducive to the stretching of L929 cells. After 14 d of in vivo wound modeling in rats, it was found that the hydrogel loaded with pirfenidone (PFD) could promote collagen deposition and accelerate wound healing with scar prevention. This rehydratable hydrogel can be stored and transported under dry conditions, which is promising for practical applications.

Graphene oxide/ε-poly-L-lysine self-assembled functionalized coatings improve the biocompatibility and antibacterial properties of titanium implants.

The construction of an antibacterial biological coating on titanium surface plays an important role in the long-term stability of oral implant restoration. Graphene oxide (GO) has been widely studied because of its excellent antibacterial properties and osteogenic activity. However, striking a balance between its biological toxicity and antibacterial properties remains a significant challenge with GO. ε-poly-L-lysine (PLL) has broad-spectrum antibacterial activity and ultra-high safety performance. Using Layer-by-layer self-assembly technology (LBL), different layers of PLL/GO coatings and GO self-assembly coatings were assembled on the surface of titanium sheet. The materials were characterized using scanning electron microscope (SEM), Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS) and contact angle test. The antibacterial properties of Porphyromonas gingivalis (P.g.) were analyzed through SEM, coated plate experiment, and inhibition zone experiment. CCK-8 was used to determine the cytotoxicity of the material to MC3T3 cells, and zebrafish larvae and embryos were used to determine the developmental toxicity and inflammatory effects of the material. The results show that the combined assembly of 20 layers of GO and PLL exhibits good antibacterial properties and no biological toxicity, suggesting a potential application for a titanium-based implant modification scheme.

An Injectable Magnesium-Based Cement Stimulated with NIR for Drug-Controlled Release and Osteogenic Potential.

Magnesium phosphate bone cement (MPC) has gained widespread usage in orthopedic implantation due to its fast-setting and high initial strength benefits. However, the simultaneous attainment of drug-controlled release and osteogenic potential in MPC remains a significant challenge. Herein, a strategy to create a smart injectable cement system using nanocontainers and chondroitin sulfate is proposed. It employs nanocontainers containing alendronate-loaded mesoporous silica nanoparticles, which are surface-modified with polypyrrole to control drug release in response to near-infrared (NIR) stimulation. The alendronate-incorporated cement (ACMPC) exhibits improved compressive strength (70.6 ± 5.9 MPa), prolonged setting time (913 s), and exceptional injectability (96.5% of injection rate and 242 s of injection time). It also shows the capability to prevent degradation, thus preserving mechanical properties. Under NIR irradiation, the cement shows good antibacterial properties due to the combined impact of hyperthermia, reactive oxygen species, and alendronate. Furthermore, the ACMPC (NIR) group displays good biocompatibility and osteogenesis capabilities, which also lead to an increase in alkaline phosphatase activity, extracellular matrix mineralization, and the upregulation of osteogenic genes. This research has significant implications for developing multifunctional biomaterials and clinical applications.

Biobased antibacterial underwater adhesive based on in situ siliconization crosslinking

Underwater adhesives have gained significant attention because of their bright application prospects in industry and biomedical fields. However, exploiting a facial strategy to prepare an antibacterial biobased adhesive with admirable underwater adhesion remains a challenge. In this study, a novel biobased antibacterial underwater adhesive was developed based on the biomimetic siliconization strategy. Epoxidized soybean oil (ESO) was decorated with (3-aminopropyl) triethoxysilane through reactions between the amino and epoxy groups to prepare silanized soybean oil (ESO-Si). Under hydrolysis, tannic acid (TA) served as crosslinking cores to induce Si–O–C bonding with ESO-Si to improve the cohesion of ESO-Si. The TA cross-linked silicification system endowed ESO-Si/TA with admirable underwater adhesion on various substrate surfaces. Benefiting from the antibacterial effect of TA, the prepared ESO-Si/TA underwater adhesive also exhibited a good antibacterial property. A novel method of utilizing water-induced bio-siliconization system to develop high-performance underwater adhesive was proposed, offering a new idea for the preparation of new biobased underwater adhesives.