Gold Nanoparticles Research Articles

Gold Nanoparticles for Photothermal and Photodynamic Therapy

Gold Nanoparticles for Photothermal and Photodynamic Therapy

Ultrasound-Driven Nanomachine for Enhanced Sonodynamic Therapy of Non-Small-Cell Lung Cancer.

Non-small-cell lung cancer (NSCLC) is the most prevalent type of lung cancer, and there is an urgent need for developing novel therapies. Sonodynamic therapy exhibits exceptional tissue penetration and minimal harm to healthy tissue, making it extremely promising for cancer treatment. The efficacy of SDT is limited by the intricate immunological microenvironment and the resistance to tumor treatment. This study developed targeted nanoparticles that use ultrasound to concentrate on treating NSCLC. The hybrid targeted nanoparticles utilize gold nanoparticles as their fundamental component, with the outside modified with engineered macrophage exosomes and the aptamer S11e to specifically target NSCLC. Ultrasound could effectively eliminate tumors in NSCLC cells by destroying lysosomes via targeted nanoparticles. Simultaneously, fragmented tumor antigens could effectively activate dendritic cell cells to recruit T cells. This method has significant efficacy in suppressing the development of NSCLC and exhibits potential for therapeutic application.

Size Effects of Gold Nanoparticles on Surface Plasmon Resonance Assays for DNA Hybridization.

Recent advancements in signal amplifiers, such as biofunctionalized gold nanoparticles (AuNPs) have improved the surface plasmon resonance (SPR) performance. However, the correlation between the sizes of DNA-Au conjugates and the SPR chips remains elusive. We investigated how the size of AuNPs functioned with DNA detection probes (D-AuNPs) affect SPR signals in sandwich DNA hybridization assays. The effects of three sizes (5, 13, and 29 nm) of D-AuNPs with an equal surface probe density were systematically compared to delineate the relationship between signal amplification and steric hindrance. Sporadically adsorbed target DNA on sparse capture probe-coated chips led to a growth of signal amplification with larger D-AuNPs. In contrast, on dense capture probe-coated SPR chips, when the target DNA concentration was above 1.5 nM, the medium-sized 13-nm AuNPs displayed 1.7- and 1.3-fold enhancement factors than 5-nm and 29-nm ones, respectively. Our results indicate the steric hindrance disturbs the capture of D-AuNPs on dense target DNA-modified chips, rendering the surface density of captured D-AuNPs a determining factor of the sensor response. Alternatively, the sensor sensitivity to D-AuNP surface density is crucial on chips with sparse target DNA. These insights should stimulate and guide future research on surface functionalization toward SPR sensors and AuNPs.

Demystifying the Potential of Embelin-Loaded Nanoformulations: a Comprehensive Review.

Phytoconstituent based therapies have the potential to reduce the adverse effects and enhance overall patient compliance for different diseased conditions. Embelin (EMB) is a natural compound extracted from Embelia ribes that has demonstrated high therapeutic potential, particularly as anti-inflammatory and anticancer therapeutic applications. However, its poor water solubility and low oral bioavailability limitations make it challenging to use in biomedical applications. Nanostructure-based novel formulations have shown the potential to improve physicochemical and biological characteristics of active pharmaceutical ingredients obtained from plants. Different nanoformulations that have been utilized to encapsulate/entrap EMB for various therapeutic applications are nanoliposomes, nanostructured lipid carriers, niosomes, polymeric nanoparticles, nanosuspensions, phytosomes, self nanoemulsifying drug delivery system, silver nanoparticles, microparticles, solid lipid nanoparticle, gold nanoparticles and nanomicelles. The common methods reported for the preparation of EMB nanoformulations are thin film hydration, nanoprecipitation, ethanol injection, emulsification followed by sonication. The size of nanoformulations ranged in between 50 and 345nm. In this review, the mentioned EMB loaded nanocarriers are methodically discussed for size, shape, drug entrapment, zeta potential, in vitro release & permeation and in vivo studies. Potential of EMB with other drugs (dual drug approach) incorporated in nanocarriers are also discussed (physicochemical and preclinical characteristics). Patents related to EMB nanoformulations are also presented which showed the clinical translation of this bioactive for future utilization in different indications.

UV light promoted dihydrolipoic acid and its alanine derivative directed rapid synthesis of stable gold nanoparticles and their catalytic activity

In general, colloidal gold nanoparticles (AuNPs) have been synthesized in heated or boiling water containing HAuCl4 precursor with sodium citrate as reducing stabilizing reagent. Although temperature plays a driving for synthesis of AuNPs, elevated temperature in thermal reduction method causes aggregation of the AuNPs. The preferential, rapid and strong binding of dihydro-lipoic acid and its derivatives on surface of AuNPs via thiol − Au chemistry promote the production of very stable AuNPs. In this study, we have developed citric acid (CA), dihydrolipoic acid (DHLA) and DHLA-Alanine (DHLA-Ala) directed rapid synthesis of ultra-stable AuNPs, DHLA@AuNPs and DHLA-Ala@AuNPs, under the UV (311 nm) irradiation at room temperature (RT: 25 °C) in around 10 min (min). CA is used as a potential reducing agent to expedite both reduction of Au3+ ion and AuNP formation, DHLA and DHLA-Ala act as stabilizing agents by replacing CA molecules on surface of AuNPs in order to produce quite stable AuNP. It is worthy to mention that reduction of Au3+ ion, formation and surface stabilization of AuNPs are consequently occurred in one step. We also investigated how experimental parameters including reaction time and temperature, pH of reaction solution, affect formation of the AuNPs. The effects of salt concentration and storage temperature were studied to show stability of the AuNPs. The synthesized DHLA@AuNPs and DHLA-Alanine@AuNPs were characterized via UV-Vis spectrophotometer (UV-Vis), scanning transmission electron microscope (STEM), dynamic light scattering (DLS) and Zeta potential (ZT) devices. The reduction of 4-nitrophenol (4-NP) to 4-aminophenol (4-AP) was efficiently catalyzed by the AuNPs in the presence of sodium borohydride in aqueous solution.

Localized surface plasmon resonance induced nonlinear absorption and optical limiting activity of gold decorated graphene/MoS2 hybrid

The synergistic supremacy of a hybrid nanocomposite made of reduced graphene oxide (rGO), molybdenum disulfide (MoS2) and gold nanoparticles (Au) for Q-switching and optical limiting applications is investigated. Hydrothermally synthesized Au-rGO-MoS2 hybrid with varying concentrations of Au (2.5, 5, 7.5 and 10 wt%) was subjected to interact with Q-switched Nd:YAG nanosecond green laser pulses. The intensity dependent nonlinear absorption studies revealed a switch over in the nonlinear behaviour from saturable absorption (SA) to reverse saturable absorption (RSA) behaviour. SA occurs due to ground state bleaching at comparatively lower laser irradiances serving the need for Q-switching and optical communications. The RSA trait at higher laser irradiance is attributed to sequential two-photon absorption which serves as the platform for optical limiting behaviour prompting laser safety and effective photothermal therapy applications. The strong mid-visible and UV absorption promotes the availability of multiple energy bands for energy transitions of excited state absorption (ESA). Enhanced local fields due to localized surface plasmon resonance effect, structural defects, hierarchical morphology, increased absorption cross-section and plasmon induced energy transfer promotes robust ESA process. These tunable nonlinear optical properties make Au-rGO-MoS2 hybrid promising futuristic candidates for applications in nonlinear photonic devices, ultrafast optical switches and all-optical signal processing systems.

Plasma‐Enhanced Magnetron Sputtering: A Novel Approach for Biofunctional Metal Nanoparticle Coatings on Reverse Osmosis Composite Membranes

AbstractReverse osmosis (RO) is the most common method for treating salt and brackish water. As a membrane‐driven process, a key challenge for RO systems is their susceptibility to scaling and biofouling. To address these issues, functional coatings utilizing metal nanoparticles (MNPs) are developed. In this study, silver, gold, and copper nanoparticles are applied onto thin‐film composite (TFC) membranes using plasma‐enhanced magnetron sputtering. The elemental composition, surface morphology, and hydrophilicity of the coatings are analyzed using X‐ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), and contact angle measurements. The antimicrobial properties and the filtration efficiency of the coated membranes are assessed through application‐specific experimental setups. Silver and copper nanoparticles exhibit superior antimicrobial properties, reducing microorganism adhesion by a factor of 103 compared to uncoated membranes. Under appropriate coating conditions, no deterioration in filtration performance is observed. Enhancing the adhesion of MNPs is necessary for achieving sustained release of metal ions.

Tetrahybrid nanoparticles through squeezed channel with inclined Lorentz forces

Heat exchangers, nuclear power plants, and other engineering and manufacturing operations all involve high temperatures. These systems have a very big temperature gradient, which has a substantial impact on the fluid's transport characteristics. Under such circumstances, using the linear Boussinesq approximation and taking into account the constant thermophysical parameters for the ambient liquid become meaningless. Thus, under the impact on the angled magnetic field and joule heating, the radiative convection flow of the blood-based tetrahybrid nanoliquid in a squeezing channel is examined in this work. The base fluid that contains the distributed alumina, gold, silver, and titania nanoparticles is blood. Through suitable transformations, the partial governing equations were decreased into nonlinear ordinary differential equation's, which are then resolved mathematically applying the fourth-order accurate BVP4C technique. The increase in the viscous dissipation parameter corresponds toward the notable elevation on the blood temperature profile. The rate of heat transfer 57.4519% improved in Au-Ag-Al2O3-TiO2/blood than that of pure blood.

Long-Range Three-Dimensional Tracking of Nanoparticles Using Interferometric Scattering Microscopy.

Tracking nanoparticle movement is highly desirable in many scientific areas, and various imaging methods have been employed to achieve this goal. Interferometric scattering (iSCAT) microscopy has been particularly successful in combining very high spatial and temporal resolution for tracking small nanoparticles in all three dimensions. However, previous works have been limited to an axial range of only a few hundred nanometers. Here, we present a robust and efficient measurement and analysis strategy for three-dimensional tracking of nanoparticles at high speed and with nanometer precision. After discussing the principle of our approach using synthetic data, we showcase the performance of the method by tracking gold nanoparticles with diameters ranging from 10 to 80 nm in water, demonstrating an axial tracking range from 4 μm for the smallest particles up to over 30 μm for the larger ones. We point out the limitations and robustness of our system across various noise levels and discuss its promise for applications in cell biology and material science, where the three-dimensional motion of nanoparticles in complex media is of interest.

Zr-MOF-based substrate with inherent internal standards facilitates reliable SERS analysis of sulfonamide antibiotics

A multifunctional structure comprising gold nanoparticles immobilized within a zirconium-based metal-organic framework (AuNPs/Zr-MOF) was systematically designed. With the capabilities of analyte enrichment, Raman signal enhancement and internal standard calibration, the as-prepared AuNPs/Zr-MOF substrates demonstrate the outstanding SERS sensing performance toward the representative sulfonamide antibiotics (SAs), sulfadiazine, sulfamerazine, sulfamethazine and sulfaquinoxaline. For the first time, these four SAs are detected by SERS in real honey samples at levels of 2.8 ∼ 5.2 ng·g−1 within 10 min. The extensive π-bond conjugated system of Zr-MOF significantly enhances the concentration of SAs through π-π interactions. The entrapped SAs are adsorbed perpendicularly onto the surface of Au via coordinated interactions between Au and two oxygen atoms, or between Au and the terminal amino group. To achieve reliable quantitative analysis, the inherent vibration of the Zr-MOF structure was used as an internal standard label. Combined with a simple clean-up protocol, the established SERE sensing method is superior to conventional methods in terms of time, while achieving the impressive sensitivity. This study presents a robust SERS-based approach for the rapid detection and monitoring of multiple analytes.

Eco-friendly Synthesis of Gold Nanoparticles of Methanolic Extract of Bauhinia vahlii Leaves and Evaluation of Tyrosinase Inhibitory Activity

Background: The green synthesis of gold nanoparticles (AuNPs) using natural materials has gained significant attention in recent years due to their eco-friendliness and potential applications in various fields. Methods: The present study aimed at the green synthesis and anti-hyperpigmentation potential of gold nanoparticles (AuNPs) using a methanolic extract of Bauhinia vahlii. Furthermore, the green synthesis of the AuNPs was confirmed by UV-visible, FT-IR, XRD, and EMDEX analysis. The size and surface topological significance of green synthesized AuNPs were evaluated through Scanning Electron Microscope and Field Emission Scanning Electron Microscopy. Results: The size of the synthesized AuNPs was found to be in the range of 100-1000 nm. The tyrosinase inhibitory activity of AuNPs was evaluated through the mushroom tyrosinase inhibitory assay method. The tyrosinase inhibitory activities of crude extract, AuNPs, and Kojic acid were found to be 98.7 ±0.7, 75±1.3 and 41±1.1 μg/ml, respectively. Conclusion: Hence, green synthesized AuNPs of B. vahlii leaf extract may be used as a potent antihyperpigmentation agent in the market of nano cosmeceuticals.

ImageJ and smartphone app chemistry analyzer using image-based colorimetric assay for quantitative detection of melamine

Abstract A smartphone-assisted microchemistry analyzer with an image-based colorimetric assay using ImageJ and a smartphone app detection method was successfully developed for the quantitative detection of melamine (MEL). The color changes of the MEL in the colloidal gold lateral flow immunoassay strip were captured and analyzed using a smartphone-controlled analyzer with an LED light source and a smartphone camera. The smartphone camera and light source were used to read the colorimetric signal from the strip, and a smartphone app was written and installed onto the smartphone. The quantitative analysis was validated with ImageJ and smartphone app colorimetric analysis. The limits of detection (LODs) for ImageJ and the smartphone app were calculated as 0.30 and 0.07 mg/L, respectively. The highly quantitative relationships between the MEL concentrations and the optical density and gray value of the ImageJ and smartphone app detection method. The designed image-based biosensor is successfully applied to detect MEL in solution of standard MEL and commercial milk samples.

Effect of CCl4 on Renal Tissues of Male Mice and Prevented by Pretreatment with Bromelain Loaded with Gold Nanoparticles: Histopathological and Caspase-9 Expression Alterations

The study aimed to investigate the potential protective effect of bromelain on renal histopathological changes induced by carbon tetrachloride (CCl4) in albino mice. CCl4 is widely used in the chemical industry but is also known to cause toxicity to various organs including the brain, liver, kidneys and lungs. In this study, 49 animals were divided into 7 equal groups. The kidneys of the mice were examined to assess histopathological changes and immunohistochemical markers, specifically caspase-9. The groups that received bromelain solution coated with gold nanoparticles demonstrated greater protective effects against CCl4-induced kidney damage. The findings suggest that kidney damage induced by CCl4 may be attributed to oxidative stress, which disrupts the antioxidant defense system, enzyme function and biochemical markers. However, administration of bromelain significantly mitigated CCl4 toxicity by enhancing the antioxidant defense system and reducing the production of free radicals. Notably, the study found that a dose of 300 mg of bromelain effectively reduced CCl4-induced toxicity in rats. This highlights the potential therapeutic value of bromelain in protecting against chemical-induced kidney damage. HIGHLIGHTS The kidney damage from carbon tetrachloride can occur through oxidative stress, altering the antioxidant defense system, enzyme function, and biochemical markers. The bromelain can decreased the toxicity of CCL4. The 300 mg bromelain solution proved to be more efficacious than the 100 mg dose. GRAPHICAL ABSTRACT

Surface Functionalization of Gold Nanoparticles Using Alkyne Derivatives: Applications in Chemical Sensing.

Colloidal gold nanoparticles (AuNPs) are important nanomaterials for chemical sensing and therapeutics. For their application, it is vital to develop a reliable and robust surface functionalization method that can be applied to diverse functional molecules and offer better stability under harsh biological conditions. Currently, thiol (SH) is the most commonly used functional group for forming stable covalent bonds with AuNPs. However, thiolated molecules typically require complicated preparation procedures, are susceptible to oxidation, and are not compatible with many electrophiles and reducing groups. In this study, we report that surface functionalization of AuNPs can be achieved using alkyne derivatives, which exhibit several advantages over classical thiolation and peptide-bond methods, including straightforward preparation of alkyne derivatives, rapid and simple conjugation in buffers and complex media, higher conjugation efficiency, long-term stability, and resistance to decomposition under harsh conditions. Several alkynylated biotin and fluorescein derivatives are prepared, and the alkynylated-AuNPs are characterized using a lateral flow assay, gel electrophoresis, and spectroscopy techniques to investigate the conjugation efficiencies, size distributions, protein interaction properties, and binding mode of the Au-alkyne bond. We also demonstrate that alkynylated-AuNPs can be used for the sensitive detection of hydrogen peroxide and streptavidin proteins.

Inkjet-Printed Localized Surface Plasmon Resonance Subpixel Gas Sensor Array for Enhanced Identification and Visualization of Gas Spatial Distributions from Multiple Odor Sources

The visualization of the spatial distributions of gases from various sources is essential to understanding the composition, localization, and behavior of these gases. In this study, an inkjet-printed localized surface plasmon resonance (LSPR) subpixel gas sensor array was developed to visualize the spatial distributions of gases and to differentiate between acetic acid, geraniol, pentadecane, and cis-jasmone. The sensor array, which integrates gold nanoparticles (AuNPs), silver nanoparticles (AgNPs), and fluorescent pigments, was positioned 3 cm above the gas source. Hyperspectral imaging was used to capture the LSPR spectra across the sensor array, and these spectra were then used to construct gas information matrices. Principal component analysis (PCA) enabled effective classification of the gases and localization of their sources based on observed spectral differences. Heat maps that visualized the gas concentrations were generated using the mean squared error (MSE) between the sensor responses and reference spectra. The array identified and visualized the four gas sources successfully, thus demonstrating its potential for gas localization and detection applications. The study highlights a straightforward, cost-effective approach to gas sensing and visualization, and in future work, we intend to refine the sensor fabrication process and enhance the detection of complex gas mixtures.

In-Depth Characterization of Natural Clays from Southeast Albania

Clays have been exploited in the manufacture of diverse products from ceramics to paints, pharmaceuticals, plastics, cosmetics, and more. Thus, they can be used in many industrial applications, showing good adsorbent ability thanks to their lamellar structure, high cation exchange capacity, pore size distribution, and large surface area. For this reason, considerable attention has been paid to their in-depth characterization, for further integration in sectors such as biomedicine, construction, remediation, aerospace, and nanotechnology. For this aim, two samples of natural clays, ALO1 and PRE4, from the southeast part of Albania, were subject to a multi-methodological characterization, with the aim of addressing the use of such geomaterials in possible sensing applications. X-ray fluorescence analysis, morphological characterization of the samples, and energy-dispersive system spectroscopy pointed to an extreme mineralogical variety, with kaolinite in AL01 and montmorillonite in PRE4 as the most abundant phases. This fact was further confirmed by powder X-ray diffraction, showing a quartz content of 20%, a kaolinite content of 64%, and a muscovite content of 16% for ALO1; meanwhile, for PRE4, we found a content of quartz of 45%, a content of montmorillonite of 34.9%, and a content of clinochlore of 20%. Infrared spectroscopy and thermal analyses confirmed the presence of hydroxyl groups in both samples, suggesting a higher content in ALO1. Measurement of N2 adsorption isotherms on the clay samples yields specific surface areas of 87 m2/g for PRE4 and 32 m2/g for ALO1, pore volumes of 0.721 cm3/g for PRE4 and 0.637 cm3/g for ALO1, and similar pore sizes in the range of 6–12 nm. Electrochemical analysis highlighted a good conductivity of ALO1 and PRE4 when used for the modification of commercial carbon-based screen-printed electrodes. In detail, higher currents were registered by differential pulse voltammetry for the electrodes modified with the clays with respect to bare electrodes, as well as good repeatability of the measurements. In addition, a comparative study with nanomaterials, known for their good conductivity, was achieved, using carbon black and gold nanoparticles as a reference, showing that the conductivity of the clays was lower than but not so different from those of the reference materials.

Loop-Mediated Isothermal Amplification Assay Using Gold Nanoparticles for Detecting Treponema pallidum subspp. pallidum.

Venereal syphilis in humans is caused by Trepenoma pallidum subspp. pallidum. A study has shown that 30,302 individuals in Thailand had syphilis in 2020, with a male-to-female ratio of 1:0.8 and the highest incidence rate at ages between fifteen and twenty-four. This research aimed to develop a loop-mediated isothermal amplification assay using gold nanoparticles (LAMP-AuNPs). Analytical sensitivity, diagnostic specificity, accuracy, and predictive values for each technique are provided. The diagnosis sensitivities of polymerase chain reaction using agarose gel electrophoresis (PCR-AGE), loop-mediated isothermal amplification assay using agarose gel electrophoresis (LAMP-AGE), and LAMP-AuNPs were 116 ng/µL, 11.6 ng/µL, and 11.6 ng/µL, respectively. We evaluated the analytical specificity using PCR and a LAMP-based assay, and there was no cross-reactivity to Leptospira interrogans, Staphylococcus aureus, Enterococcus faecalis, Escherichia coli, Klebsiella pneumoniae, Acinetobacter baumannii, Pseudomonas aeruginosa, human immunodeficiency virus (HIV), and healthy humans. After analyzing 400 serum samples of patients suspected of syphilis, the LAMP-AGE and LAMP-AuNPs assays displayed 100% diagnostic sensitivity scores, 91% diagnostic specificity scores, 95.5% accuracy rates, 100% positive predictive values (PPVs), and 91% negative predictive values (NPVs), the positive likelihood ratio (LR+) was 11.11, while the negative likelihood ratio (LR-) was 0. Conversely, for PCR assays displayed 100% diagnostic sensitivity scores, 94.5% diagnostic specificity scores, 97.25% accuracy rates, 100% PPVs, and 94.5% NPVs, LR+ was 18.18, and LR- was 0. The LAMP-AuNPs technique demonstrates rapidity, affordability, and convenience, rendering it well-suited for point-of-care applications in the diagnosis, prevention, and management of pathogenic infections.

Hairygami: Analysis of DNA Nanostructures' Conformational Change Driven by Functionalizable Overhangs.

DNA origami is a widely used method to construct nanostructures by self-assembling designed DNA strands. These structures are often used as "pegboards" for templated assembly of proteins, gold nanoparticles, aptamers, and other molecules, with applications ranging from therapeutics and diagnostics to plasmonics and photonics. Imaging these structures using atomic force microscopy (AFM) or transmission electron microscope (TEM) does not capture their full conformation ensemble as they only show their shape flattened on a surface. However, certain conformations of the nanostructure can position guest molecules into distances unaccounted for in their intended design, thus leading to spurious interactions between guest molecules that are designed to be separated. Here, we use molecular dynamics simulations to capture a conformational ensemble of two-dimensional (2D) DNA origami tiles and show that introducing single-stranded overhangs, which are typically used for functionalization of the origami with guest molecules, induces a curvature of the tile structure in the bulk. We show that the shape deformation is of entropic origin, with implications for the design of robust DNA origami breadboards as well as a potential approach to modulate structure shape by introducing overhangs. We then verify experimentally that the DNA overhangs introduce curvature into the DNA origami tiles under divalent as well as monovalent salt buffer conditions. We further experimentally verify that DNA origami functionalized with attached proteins also experiences such induced curvature. We provide the developed simulation code implementing the enhanced sampling to characterize the conformational space of DNA origami as open source software.

Engineered M13-Derived Bacteriophages Capable of Gold Nanoparticle Synthesis and Nanogold Manipulations

For years, gold nanoparticles (AuNPs) have been widely used in medicine and industry. Although various experimental procedures have been reported for their preparation and manipulation, none of them is optimal for all purposes. In this work, we engineered the N-terminus of the pIII minor coat protein of bacteriophage (phage) M13 to expose a novel HLYLNTASTHLG peptide that effectively and specifically binds gold. In addition to binding gold, this engineered phage could synthesize spherical AuNPs of 20 nm and other sizes depending on the reaction conditions, aggregate them, and precipitate gold from a colloid, as revealed by transmission electron microscopy (TEM), atomic force microscopy (AFM), and scanning electron microscopy (SEM), as well as ultraviolet–visible (UV–vis) and Fourier-transform infrared (FTIR) spectroscopic methods. We demonstrated that the engineered phage exposing a foreign peptide selected from a phage-displayed library may serve as a sustainable molecular factory for both the synthesis of the peptide and the subsequent overnight preparation of AuNPs from gold ions at room temperature and neutral pH in the absence of strong reducing agents, such as commonly used NaBH4. Taken together, the results suggest the potential applicability of the engineered phage and the new, in vitro-identified gold-binding peptide in diverse biomimetic manipulations.

Myco-nanotechnological approach to synthesize gold nanoparticles using a fungal endophyte, Penicillium oxalicum, and unravelling its antibacterial activity and anti-breast cancer role via metabolic reprogramming

The present study has been designed to fabricate fungal endophyte-assisted gold nanoparticles (AuNPs) and elucidate their anti-breast cancer potential. The aqueous extract of fungal endophytePenicillium oxalicum(PO), associated with the medicinal plantAmoora rohituka, was used for the fabrication of AuNPs (POAuNPs). Physico-chemical characterization using Ultraviolet-visible spectroscopy, Fourier transform infrared, X-ray diffraction, Dynamic light scattering, Zeta potential, Transmission electron microscopy and Field emission scanning electron microscopy analysis revealed stable, uniform distribution, spherical shape and crystalline nature of POAuNPs with a size range of 3-46 nm. Furthermore, the POAuNPs potentially inhibited the growth of pathogenic bacterial strainsEscherichia coliandStaphylococcus aureus. The synthesized POAuNPs have shown potential antioxidant effects against 2,2-diphenyl-1-picrylhydrazyl (DPPH), superoxide and nitric oxide (NO) radical scavenging assays with an EC50value of 8.875 ± 0.082, 52.593 ± 2.506 and 43.717 ± 1.449 µg mL-1, respectively. Moreover, the value of EC50for the total antioxidant capacity of POAuNPs was found to be 23.667 ± 1.361 µg mL-1. The cell viability of human breast cancer cells, MDA-MB-231 and MCF-7, was found to be reduced after treatment with POAuNPs, and IC50values were found to be 19.753 ± 0.640 and 35.035 ± 0.439 µg mL-1, respectively. Further,in vitrobiochemical assays revealed that POAuNPs induces metabolic reprogramming in terms of reduced glucose uptake, increased lactate dehydrogenase (LDH) release and, disruption of oxidative balance through depletion of glutathione levels, increased nitric oxide (NO) and lipid peroxidation levels as a possible pathway to suppress human breast cancer cell proliferation. Apoptosis-specific nuclear modulations induced by POAuNPs in human breast cancer cells were validated through 4',6-diamidino-2-phenylindole (DAPI) nuclear staining. The present investigation thus attempts to show the first ever fabrication of AuNPs using an aqueous extract ofP. oxalicumassociated withA. rohituka. The results revealed unique physico-chemical characteristics of mycogenic AuNPs, and screening their effect against breast cancer via metabolic reprogramming and induction of apoptosis thus adds great significance for cancer therapeutics, suggesting further exploration to develop nanotherapeutic drugs.