Gold Surface Research Articles

Hetero and Homo Metal Exchange of Au25(SR)18 - and Ag25(SR)18 - Clusters with Metal-Thiolate Complexes: Ab Initio Molecular Dynamics Simulation Studies.

The hetero and homo metal exchange of Au25(SR)18 - and Ag25(SR)18 - nanoclusters with metal-thiolate (M-SR) complexes (AuI(SR), AgI(SR), CuI(SR), and CuII(SR)2) are studied using ab initio molecular dynamics (AIMD) simulations. The AIMD simulation results unveil that the M-SR complexes directly displace Au(SR) or Ag(SR) units on the gold or silver core surface through an "anchoring effect". The whole process of metal-exchange reactions can be divided into three steps, including the adsorption of M-SR complexes on clusters, the formation of new staple motif, and the displacement of Au(SR) or Ag(SR) units by M-SR complexes. The key role of sulfur atoms in metal exchange reactions in M-SR complexes is revealed, which facilitates formation of new staple motifs and doping of M-SR complexes into gold and silver cores. This work provides a theoretical basis for further exploring the metal exchange reaction between noble metal nanoclusters and metal-thiolate complexes, as well as the isotope exchange reactions.

Uncovering low-frequency vibrations in surface-enhanced Raman of organic molecules

Accessing the terahertz (THz) spectral domain through surface-enhanced Raman spectroscopy (SERS) is challenging and opens up the study of low-frequency molecular and electronic excitations. Compared to direct THz probing of heterogenous ensembles, the extreme plasmonic confinement of visible light to deep sub-wavelength scales allows the study of hundreds or even single molecules. We show that self-assembled molecular monolayers of a set of simple aromatic thiols confined inside single-particle plasmonic nanocavities can be distinguished by their low-wavenumber spectral peaks below 200 cm−1, after removal of a bosonic inelastic contribution and an exponential background from the spectrum. Developing environment-dependent density-functional-theory simulations of the metal-molecule configuration enables the assignment and classification of their THz vibrations as well as the identification of intermolecular coupling effects and of the influence of the gold surface configuration. Furthermore, we show dramatically narrower THz SERS spectra from individual molecules at picocavities, which indicates the possibility to study intrinsic vibrational properties beyond inhomogeneous broadening, further supporting the key role of local environment.

UV-random lasing of ZnO films decorated with Au nanoparticles and modification of lasing threshold by surface plasmon effect

Threshold energy values for random lasing action are determined from spectral and temporal coherence studies in systems with incoherent feedback. Zinc oxide films with and without their surface having been decorated with gold nanoparticles stand simultaneously for the active and the scattering medium, whereas pumping is carried out by a conventional laser system operating at the picosecond pulse regime. The influence of the gold surface on both the threshold and the intensity of the optical response is investigated. Whenever localized surface plasmon resonances are supported, electron mobility at the gold boundaries facilitates reinsertion of the trapped electrons into shallow defect levels to the conduction band. In consequence the characteristic visible emission from ZnO (green) due to transitions from such levels is suppressed, thus lowering the pumping threshold prerequisite for random lasing emission. The tunning of the random lasing threshold is achievable by means of control on the morphology and size effects of the gold nanoparticles. This contribution shows that specific post-thermal treatments could be exploited to adjust the lasing properties of novel metal decorated systems, which already feature random lasing before decoration. In principle, the extension of the decoration should be rather small to minimize response losses due to screening side effects of the metal phase, which obtrudes direct contact of the pumping photons with the semiconductor system.

Novel mixed self-assembled monolayers of L-cysteine and methanol on gold surfaces under ambient conditions.

In this work, we carried out an experimental and theoretical study on the formation of self-assembled monolayers of L-cysteine molecules on gold surfaces in the presence of methanol as a solvent. We report for the first time L-cysteine and methanol ordered structures forming a mixed self-assembled mono-layer on Au(100) surfaces under ambient conditions. Finger-like ordered structures with a relative height of 0.10-0.20 nm, average width of 2.0 nm and variable lengths were observed using scanning tunneling microscopy under room temperature and ambient pressure conditions. Using X-ray photoemission spectroscopy, it was determined that L-cysteine molecules bind to the gold surface through the sulfur atom of their thiol group in two molecular configurations: neutral and zwitterionic. We found that the finger-like structures are the result of complex interactions of L-cysteine molecules with gold surfaces and L-cysteine molecules with methanol molecules and among all three components of the system (L-cysteine + methanol + gold surfaces). These interactions were detected through attenuated total reflectance-Fourier transform infrared spectroscopy. Furthermore, adsorbate/substrate interactions were studied by employing ab initio calculations using density functional theory, resulting in molecular arrangements formed by chains of L-cysteine pairs surrounded by physisorbed methanol molecules.

Electrocatalysis of CO2 Reduction by Immobilized Formate Dehydrogenase without a Metal Redox Center.

Nicotinamide adenine dinucleotide-dependent formate dehydrogenase from Candida boidinii was immobilized in a 1,2-dimyristoyl-sn-glycero-3-phosphocholine/cholesterol floating lipid bilayer on the gold surface as a biocatalyst for electrochemical CO2 reduction. We report that, in contrast to common belief, the enzyme can catalyze the electrochemical reduction of CO2 to formate without the cofactor protonated nicotinamide adenine dinucleotide. The electrochemical data indicate that the enzyme-catalyzed reduction of CO2 is diffusion-controlled and is a reversible reaction. The orientation and conformation of the enzyme were investigated by surface-enhanced infrared reflection absorption spectroscopy. The α-helix of the enzyme adopts an orientation nearly parallel to the surface, bringing its active center close to the gold surface. This orientation allows direct electron transfer between CO2 and the gold electrode. The results in this paper provide a new method for the development of enzymatic electrocatalysts for CO2 reduction.

Correlating structure, self-assembly chemistry and conductivity of trithiocyanuric acid on Au(111)

The majority of candidates for simple model molecular-electronic components consist of a conductive π-conjugated hydrocarbon linker attached to at least two anchoring groups, such as thiols or isocyanides. It has been found that select molecules self-assemble on gold surfaces, creating one-dimensional conductive structures that act as “molecular wires”. Furthermore, these oligomers can form molecular bridges between gold nanoparticles, leading to the creation of simple molecular-electronic devices. This raises the question whether other π-conjugated molecular linkers could exhibit similar behavior that might offer a broader range of candidates for fabricating electronic devices. Trithiocyanuric acid (1,3,5-triazine-2,4,6-trithiol, TTCA) provides a possible candidate. TTCA (C3N3(SH)3) can exist as a trithiol or as a trithione in which hydrogens transfer to the sulfurs so that they are present with three C=N groups within the ring. TTCA exists naturally in the trithione form but converts into a trithiol when adsorbed onto an Ag(111) where it is vertically oriented. The structure of TTCA adsorbed on Au(111) is studied here using reflection-absorption infrared spectroscopy (RAIRS) where it is found to remain as the trithione isomer, but changes orientation as the coverage increases. Scanning-tunneling microscopy (STM) reveals that TTCA oligomerizes on Au(111) to form chains and triangular structures. The influence on molecular conductivity due to the differences in the adsorbate's isomeric structure was investigated using devices comprising either silver or gold nanoparticles deposited in the gap between gold nanoelectrodes. Both devices were found to conduct when dosed with TTCA, but the devices fabricated using silver were about 13 time more conductive than those made from gold nanoparticles, consistent with the π-conjugated structure formed on silver but not on gold. This implies that oligomers form both on silver and on gold and potentially increases the range of molecule-metal combinations that might be used to fabricate molecular-electronic devices.

Electrospun Cellulose Acetate/Maleic Acid Functionalized Gold Nanoparticles as Pb(II) Ions Colorimeter Senser Strip

This study investigates the synthesis of gold nanoparticles and surface modifications to enable their utilization as a colorimetric sensor strip on electrospun nanofibrous. Additionally, it utilizes cellulose acetate electrospun fiber preparations as substrates for loading the gold nanoparticles. In order to produce gold nanoparticles, citrate reduction was employed, followed by modification with maleic acid (MA-GNPs). MA-GNPs were significantly more selective for Pb2+ than for other ions (Co2+, Cu2+, Hg2+, Ni+), according to the results. Following the introduction of Pb2+, the solutions exhibited a color change from red to blue or purple, which was attributed to the aggregation of nanoparticles, as determined by UV-Vis spectrometry. An optical band indicative of GNPs and MA-GNPs was detected at an estimated wavelength of 520 nm. Approximately 600 nanometers after the addition of Pb2+, the intensity of the solution progressively decreased to 520 nanometers, and a new band emerged. To fabricate cellulose acetate nanofibrous via electrospinning, the impact of solvent ratios, polymer concentrations, and process conditions were investigated. The ideal parameters for the fabrication of the substrate were as follows: 15%w/w polymer solution, 15 kV electrospinning voltage, 15 cm needle-to-collector distance, and 48 hours of collecting time. In order to examine the color change of the prepared strip, it is observed that the strip transforms from red to blue upon exposure to Pb2+ ions of varying concentrations, just as it does in solution form. An examination of water samples indicated that the strip remained colorless when tested with DI water. However, testing with wastewater sourced from a battery facility identified a transformation of the strip from red to purplish blue. This is equivalent to an estimated lead concentration of 40 parts per million. The outcomes showcased the capacity of the discolored strips to identify the preliminary concentration of lead ions, suggesting potential for future advancements in this area.

Brittle Fracture Behavior of Sn-Ag-Cu Solder Joints with Ni-Less Surface Finish via Laser-Assisted Bonding.

In this study, we investigated the brittle fracture behavior of Sn-3.0Ag-0.5Cu (SAC305) solder joints with a Direct Electroless Gold (DEG) surface finish, formed using laser-assisted bonding (LAB) and mass reflow (MR) techniques. Commercial SAC305 solder balls were used to ensure consistency. LAB increases void fractions and coarsens the primary β-Sn phase with higher laser power, resulting in a larger eutectic network area fraction. In contrast, MR produces solder joints with minimal voids and a thicker intermetallic compound (IMC) layer. LAB-formed joints exhibit higher high-speed shear strength and lower brittle fracture rates compared to MR. The key factor in the reduced brittle fracture in LAB joints is the thinner IMC layer at the joint interface. This study highlights the potential of LAB in enhancing the mechanical reliability of solder joints in advanced electronic packaging applications.

Plasmonic Optical Fiber Sensors and Molecularly Imprinted Polymers for Glyphosate Detection at an Ultra-Wide Range

In this study, a surface plasmon resonance (SPR) sensor based on modified plastic optical fibers (POFs) was combined with a specific molecularly imprinted polymer (MIP), used as a synthetic receptor, for glyphosate (GLY) determination in aqueous solutions. Since GLY is a non-selective herbicide associated with severe environmental and health problems, detecting glyphosate in environmental and biological samples remains challenging. The selective interaction between the MIP layer and GLY is monitored by exploiting the SPR phenomenon at the POF’s gold surface. Experimental results show that in about ten minutes and by dropping microliter volume samples, the presented optical–chemical sensor can quantify up to three orders of magnitude of GLY concentrations, from nanomolar to micromolar, due to a thin MIP layer over the SPR surface. The developed optical–chemical sensor presents a detection limit of about 1 nM and can be used for onsite GLY measurements. Moreover, the experimental analysis demonstrated the high selectivity of the proposed POF-based chemical sensor.

Designing nanoporous Pd catalyst with dual enhancement of thermodynamics and kinetics for formic acid oxidation reaction

Conventional strategies for developing highly efficient electrocatalysts involve enhancing thermodynamics to minimize overpotential and improving kinetics to maximize reaction current. However, current research on Pd-based catalysts for formic acid oxidation reaction (FAOR) mainly focuses on accelerating its kinetics to increase the peak current. This study proposes a catalyst design that can simultaneously improve the kinetics and thermodynamics of FAOR. Specifically, the home-made catalyst (NPG-Pt1-Pd1) is obtained by sequentially depositing monolayer Pt and Pd shells on the surface of nanoporous gold (NPG) substrate. Compared with commercial Pd/C, this electrocatalyst exhibits a noticeable negative shift in onset potential (∼100 mV) and a significantly improved peak current (∼6 times). Experimental data and theoretical calculations demonstrate that NPG-Pt1-Pd1 exhibits a comparatively suitable adsorption energy for small molecules, not only reducing the overpotential but also accelerating the reaction rate of FAOR. Moreover, when applied in direct formic acid fuel cells (DFAFC), the NPG-Pt1-Pd1 anode with an exceptionally low Pd loading of 8.5 μg cm−2, achieves a remarkable power density of 141 mW cm−2. The power efficiency of Pd is 230 times that of Pd/C (1 mg cm−2, 73 mW cm−2). Therefore, this work provides a new methodology for developing efficient Pd-based FAOR electrocatalysts.

Anchoring Atomically Precise Chiral Bismuth Oxido Nanoclusters on Gold: The Role of Amino Acid Linkers.

The adsorption of chiral molecules onto metallic surfaces triggers electron spin polarization at the interface, paving the way for applications in chiral opto-spintronics. However, the spin effects sensitively depend on the binding and ordering of the chiral species on surfaces. This study explores the adsorption of chiral thioether-functionalized atomically precise bismuth oxido nanoclusters (BiO-NCs) on gold (Au) surfaces, extending the conventional approach of using thiol-containing molecules and complexes to nanoclusters. Starting from the precursor [Bi38O45(NO3)20(dmso)28](NO3)4·4dmso (A), chiral BiO-NCs were synthesized by substituting the nitrates with N-(tert-butoxycarbonyl)-l-methionine (Boc-l-Met-O-) ligands to obtain [Bi38O45(Boc-l-Met-O)24] (2). The full exchange of nitrate by the Boc-l-methionine ligand was demonstrated by powder X-ray diffractograms, dynamic light scattering, electrospray ionization mass spectrometry, nuclear magnetic resonance, infrared, circular dichroism, and X-ray photoelectron spectroscopy. Compared to previously reported [Bi38O45(Boc-l-Phe-O)24(dmso)9] (1), BiO-NC 2 shows differences in the growth mode on a Au surface as revealed by scanning electron microscopy, wherefore a stronger binding of BiO-NC 2 is assumed. Anchoring of BiO-NC 2 to the Au surface through thioether groups induced a discernible change in the optical response of the Au surface analyzed by spectroscopic ellipsometry (SE). From the numerical modeling of the SE parameters, a layer thickness of ∼2 nm, corresponding to a monolayer of BiO-NC 2, was estimated for the samples prepared by dip coating. Thus, strong adsorption of BiO-NC 2 to the Au surface is concluded, which is an essential prerequisite for chiral-induced interface spin polarization.

Charge Transfer Mechanism in Guanine-Based Self-Assembled Monolayers on a Gold Surface.

In this work, we have theoretically determined the one-electron oxidation potentials and charge transfer mechanisms in complex systems based on a self-assembled monolayer of guanine molecules adsorbed on a gold surface through different organic linkers. Classical molecular dynamics simulations were carried out to sample the conformational space of both the neutral and the cationic species. Thus, the redox potentials were determined for the ensembles of geometries through multiscale quantum-mechanics/molecular-mechanics/continuum solvation model calculations in the framework of the Marcus theory and in combination with an additive scheme previously developed. In this context, conformational sampling, description of the environment, and effects caused by the linker have been considered. Applying this methodology, we unravel the phenomena of electric current transport by evaluating the different stages in which charge transfer could occur. The results revealed how the positive charge migrates from the organic layer to the gold surface. Specifically, the transport mechanism seems to take place mainly along a single ligand and driven with the help of the electrostatic interactions of the surrounding molecules. Aside, several self-assembled monolayers with different linkers have been analyzed to understand how the nature of that moiety can tune the redox properties and the efficiency of the transport. We have found that the conjugation between the guanine and the linker, at the same time conjugated to the gold surface, gives rise to a more efficient transport. In conclusion, the established computational protocol sheds light on the mechanism behind charge transport in electrochemical DNA-based biosensor nanodevices.

Synthesis, Structural Analysis, and Peroxidase-Mimicking Activity of AuPt Branched Nanoparticles.

Bimetallic nanomaterials have generated significant interest across diverse scientific disciplines, due to their unique and tunable properties arising from the synergistic combination of two distinct metallic elements. This study presents a novel approach for synthesizing branched gold-platinum nanoparticles by utilizing poly(allylamine hydrochloride) (PAH)-stabilized branched gold nanoparticles, with a localized surface plasmon resonance (LSPR) response of around 1000 nm, as a template for platinum deposition. This approach allows precise control over nanoparticle size, the LSPR band, and the branching degree at an ambient temperature, without the need for high temperatures or organic solvents. The resulting AuPt branched nanoparticles not only demonstrate optical activity but also enhanced catalytic properties. To evaluate their catalytic potential, we compared the enzymatic capabilities of gold and gold-platinum nanoparticles by examining their peroxidase-like activity in the oxidation of 3,3',5,5'-tetramethylbenzidine (TMB). Our findings revealed that the incorporation of platinum onto the gold surface substantially enhanced the catalytic efficiency, highlighting the potential of these bimetallic nanoparticles in catalytic applications.

Chemosensitive Properties of Electrochemically Synthesized Poly-3-Thienylboronic Acid: Conductometric Detection of Glucose and Other Diol-Containing Compounds under Electrical Affinity Control.

Due to the presence of the boronic acid moieties, poly-3-thienylboronic acid has an affinity for saccharides and other diol-containing compounds. Thin films of this novel chemosensitive polymer were synthesized electrochemically on the gold surface. The adhesion of the polymer was enhanced by the deposition of a monomolecular layer of thiophenol. The technology was used to fabricate conductometric sensors for glucose and other diol-containing compounds. Simultaneous two- and four-electrode conductivity measurements were performed. The chemical sensitivity to sorbitol, fructose, glucose, and ethylene glycol was studied at different pH and electrode potentials, and the corresponding binding constants were obtained. Depending on the electrode potential, the reciprocal values of the binding constants of glucose to poly-3-thienylboronic acid at neutral pH are in the range of 0.2 mM-1.0 mM. The affinity for glucose has been studied in buffer solutions and in solutions containing the major components of human blood. It was shown that the presence of human serum albumin increases the affinity of poly-3-thienylboronic acid for diol-containing compounds.

Using Coordination Chemistry to Control "Click" Reactions: The Selective Formation of Asymmetrically Ligated Polyoxometalates.

The Cu(I)-catalyzed azide-alkyne cycloaddition reaction between (NBu4)2[V6O13((OCH2)3CCH2N3)2] and 3-ethynylpyridine led to the formation of products capable of forming poorly soluble coordination compounds with transition metal ions such as Cu(I) and Zn(II). The formation of these poorly soluble phases is an important feature that was used to determine the course of reactions, allowing the selective preparation of symmetric bis-pyridyltriazolyl and asymmetric monopyridyltriazolyl derivatives with relatively high yields and high substrate conversions. The asymmetric compound (NBu4)2[V6O13((OCH2)3CCH2-N3C2H-C5H4N)((OCH2)3CCH2N3)] (V6asym) was utilized in the subsequent "click" postfunctionalization reaction with 1,4-diethynylbenzene, resulting in a covalently bound V6asym-V6asym dimer. This dimeric compound was subjected to scanning probe microscopy studies on gold surfaces, which revealed no electronic coupling between the hexavanadate cores within the dimer upon potential-induced switching. This observation indicates that such dimers and higher-order oligomers composed of polyoxometalate-ligand-polyoxometalate bridges can be exploited as active capacitor/memristor units, relevant to increase the data storage capacity of standard memory devices with innovative molecular switching mechanisms.

Monodispersed mesoscopic star-shaped gold particles via silver-ion-assisted multi-directional growth for highly sensitive SERS-active substrates

Surface-enhanced Raman scattering (SERS) exploits localized surface plasmon resonances in metallic nanostructures to significantly amplify Raman signals and perform ultrasensitive analyses. A critical factor for SERS-based analysis systems is the formation of numerous electromagnetic hot spots within the nanostructures, which represent regions with highly concentrated fields emerging from excited localized surface plasmons. These intense hotspot fields can amplify the Raman signal by several orders of magnitude, facilitating analyte detection at extremely low concentrations and highly sensitive molecular identification at the single-nanoparticle level. In this study, mesoscopic star-shaped gold particles (gold mesostars) were synthesized using a three-step seed-mediated growth approach coupled with the addition of silver ions. Our study confirms the successful synthesis of gold mesostars with numerous sharp tips via the multi-directional growth effect induced by the underpotential deposition of silver adatoms (AgUPD) onto the gold surfaces. The AgUPD process affects the nanocrystal growth kinetics of the noble metal and its morphological evolution, thereby leading to intricate nanostructures with high-index facets and protruding tips or branches. Mesoscopic gold particles with a distinctive star-like morphology featuring multiple sharp projections from the central core were synthesized by exploiting this phenomenon. Sharp tips of the gold mesostars facilitate intense localized electromagnetic fields, which result in strong SERS enhancements at the single-particle level. Electromagnetic fields can be further enhanced by interparticle hot spots in addition to the intraparticle local field enhancements when arranged in multilayered arrays on substrates, rendering these arrays as highly efficient SERS-active substrates with improved sensitivity. Evaluation using Raman-tagged analytes revealed a higher SERS signal intensity compared to that of individual mesostars because of interparticle hot spots enhancements. These substrates enabled analyte detection at a concentration of 10− 9 M, demonstrating their remarkable sensitivity for trace analysis applications.

A strategy for covalent anchoring of self-assembling β3 oligoamide nanorods to gold surfaces

A strategy for covalent anchoring of self-assembling β³ oligoamide nanorods to gold surfaces

Modeling Vibrational Sum Frequency Generation Spectra of Interfacial Water on a Gold Surface: The Role of the Fermi Resonance.

Studying the hydrogen bonding structure of H2O at the metal-water interface is a highly complex yet fascinating endeavor. The intricate interactions and diverse orientations of water molecules on metal surfaces with varying potentials pose a significant challenge in elucidating the coupling between O-H stretching and H-O-H bending modes. In this study, we employed DFT-MD simulation to explore how the orientation of interfacial water molecules changes with the applied potential on the Au(111) surface. Based on the surface-specific velocity-velocity correlation function (ssVVCF) formula, we calculated vibrational sum frequency generation (VSFG) spectra for the O-H stretches. We found that three assigned peaks (∼3300, ∼3450, and 3650 cm-1) shifted toward lower frequencies as the potential moved toward more negative values. Our results align remarkably well with experimental Raman spectroscopy data. Notably, our VSFG analysis revealed a significant change in the VSFG spectra of the hydrogen-bonded O-H groups (∼3300 cm-1), switching from a negative to a positive sign with decreasing potential. This alteration suggests a substantial change in the orientation of these low-frequency O-H groups owing to their increased interactions with the Au surface. In contrast, the orientations of both the high-frequency O-H groups (∼3450 cm-1) and the dangling O-H groups (∼3650 cm-1) remained unaffected by the applied potentials. Furthermore, our analysis of the decomposed vibrational density of states (VDOS) for the H-O-H bending mode uncovered the coupling between the H-O-H bending and O-H stretching vibrations, known as the Fermi resonance. Our work suggests that the H-O-H bending vibration becomes restricted when water molecules transition from the ″one-H-down″ to the ″two-H-down″ conformation, leading to a redshift in the O-H stretching vibration through the Fermi resonance. By constructing the VSFG and decomposed VDOS spectra, we gained valuable insights into the structural changes that Raman spectra alone cannot fully interpret. Specifically, our analysis revealed the critical role of the Fermi resonance effect in shaping the spectroscopic signature of interfacial water molecules on the Au(111) surface.

Dual-Mode Arginine Assay Based on the Conformation Switch of a Ferrocene-Grafted Polypeptide.

Both controllable regulation of the conformational structure of a polypeptide and specific recognition of an amino acid are still arduous challenges. Here, a novel dual-mode (electrochemical and colorimetric) biosensor was built for arginine (Arg) recognition based on a conformation switch, utilizing controllable and synergistic self-assembly of a ferrocene-grafted hexadecapeptide (P16Fc) with gold nanoparticles (AuNPs). Benefiting from the flexibility and unique topological structure of P16Fc formed nanospheres, the assembly and disassembly can undergo a conformation transition induced by Arg through controlling the distance and number of Fc detached from the gold surface, producing on-off electrical signals. Also, they can induce aggregation and dispersion of AuNPs in solution, causing a color change. The mechanism of Arg recognition with polypeptide conformation regulation was well explored by combining microstructure characterizations with molecular mechanics calculations. The electrochemical and colorimetric assays for Arg were successfully established in sensitive and selective manner, not only obtaining a very low detection limit, but also effectively eliminating the interference from other amino acids and overcoming the limitation of AuNP aggregation. Notably, the conformational change-based assay with the peptide regulated by the target will make a powerful tool for the amino acid biosensing and health diagnosis.

PH-response of protein-polysaccharide multilayers adsorbed on a flat gold surface: A surface plasmon resonance study.

Polysaccharide-protein multilayers (PPMLs) consisting of bovine serum albumin (BSA) and chondroitin sulfate (CS) are assembled in acidic solution (pH 4.2) via layer-by-layer deposition method. The formation of PPMLs on gold surface and their responsiveness to pH change from 4.2 to 7 is investigated by Surface Plasmon Resonance Spectroscopy. The buildup of the multilayer at pH 4.2 exhibits non-linear growth while the formation of the first layers is strongly affected by the physicochemical properties of the gold surface. Neutral solution (pH 7) affects the interactions between the biopolymers and results in a partially disassemble (disintegration) of the multilayer film. On one hand, the single pair of layers, BSA-CS and the double pair of layers, (BSA-CS)2, assemblies are stable in neutral pH, a result that will be of interest for biomedical applications. On the other hand, multilayer films consisting of more than four layers that is (BSA-CS)2<n<5, disintegrated down to the 4-layered structure by changing pH to neutral, a fact that renders the (BSA-CS)n assembly useful in the field of drug and protein delivery. The residual mass after the disintegration of the assembly never falls below the mass of four layers. The disintegrated multilayer film can be reconstructed and disassembled repeatedly, simply by cycling the pH value.