Gold Nanoparticles Research Articles

Polydopamine‐Mediated Gold Nanostructure‐Decorated Electrospun Polycaprolactone Fibers for Photocatalytic Dye Degradation

AbstractMetallic nanoparticle (NP)‐decorated electrospun micro/nanofibers as an ideal photocatalytic system for the degradation of organic dyes may provide unique advantages in terms of 3D morphology with high surface area, well‐controlled porosity, low cost, good interconnectivity, and excellent flexibility. However, novel, flexible, low‐cost, and efficient fabrication methods are still demanded to obtain photocatalytic activity. In this report, for the first time, we propose gold NP (AuNP)‐decorated electrospun poly(Ɛ‐caprolactone) (PCL) membrane fibers through a conformal thin layer of polydopamine (PDA). Herein, PDA could reduce the Au3+ ions and enable the adsorption of AuNPs without using any reducing agent or seed material. The proposed system could degrade methylene blue after a 6‐h of daylight exposure with a rate constant of 4.83 × 10−3 and 4.64 × 10−3 min−1 for citrate‐stabilized AuNPs and reduction of Au ions cases, respectively. Even after fifth cycle of usage, AuNP‐decorated electrospun fibers showed reasonable catalytic activity without any significant change in their morphology and chemical content. For the case of rhodamine 6G, the same systems provided 55.2% and 64.1% of dye degradation within a 5‐h exposure. The proposed system presents unique advantages regarding control, flexibility, low cost, and efficiency in various catalytic applications.

Biogenically synthesized gold nanocarrier ameliorated antiproliferative and apoptotic efficacy of doxorubicin against lung cancer

IntroductionConventional chemotherapy treatment is commonly linked to significant side effects due to high therapeutic doses. In this regard, nanoformulations with chemotherapeutic medications hold promise in enhancing drug effectiveness through the reduction of therapeutic dosages, thereby mitigating the potential for adverse side effects. Because of numerous applications in the biomedical arena, there has been a rising interest in developing an environmentally acceptable, long-lasting, and affordable technique for the production of gold nanoparticles. In this particular context, the incorporation of plant extracts in the production of metallic nanoparticles has garnered the interest of numerous scholars. Here, we report the synthesis of gold particles by the green method using Cannabis sativa L. leaf extract and their conjugation with doxorubicin.MethodsThe gold nanoparticles were synthesized by using Cannabis sativa extract and were characterized with various biophysical techniques. Subsequently, gold nanoparticles were conjugated with doxorubicin and their efficacy was tested on A549 cells.Results and DiscussionThe biogenic synthesis of gold nanoparticles was ascertained through an absorption peak at a wavelength of 524 nm, and it was shifted to 527 nm when conjugated with doxorubicin. Nanoparticles were found to be stable exhibiting a zeta potential value of −20.1 mV, and it changed to −12.7 mV when loaded with doxorubicin. The hydrodynamic diameter of nanoparticles was determined to be 45.64 nm and it was increased to 58.95 nm when conjugated with the drug. The average size of nanoparticles analyzed by TEM was found to be approximately 17.2 nm, while it was 23.5 nm in the case of drug-nanoconjugate. Moreover, there was a significant amelioration in the antiproliferative potential of doxorubicin against lung cancer A549 cells when delivered with gold nanocarrier, which was evident by the lower IC50 and IC75 values of drug-nanoconjugates in comparison to drug alone. Furthermore, the inhibitory effect of drug-nanoconjugates and drug alone was characterized by alteration in the cell morphology, nuclear condensation, increased production of reactive oxygen species, abrogation of mitochondrial membrane potential, and enhanced caspase activities in A549 cells. In sum, our results suggested enhanced efficacy of doxorubicin-gold nanoconjugates, indicating effective delivery of doxorubicin inside the cell by gold nanoparticles.

Quantification of the Surface Coverage of Gold Nanoparticles with Mercaptosulfonates Using Isothermal Titration Calorimetry (ITC).

This manuscript presents a comprehensive study on the quantification of modifier molecules adsorbed on gold nanoparticles (AuNPs) using two complementary techniques Ellman's method (UV-vis spectroscopy) and isothermal titration calorimetry (ITC). In this paper, we compare the feasibility of using the ITC technique and Ellman's method to study the interactions of mercaptosulfonate compounds (sodium mercaptoethanesulfonate, MES, and sodium mercaptoundecanesulfonate, MUS) with the surface of AuNPs of various sizes. The thermodynamic functions of the attachment of mercaptosulfonates to AuNPs were determined, revealing a linear relationship between the number of adsorbed molecules and the surface area of the nanoparticles. The amount of MES and MUS determined by Ellman's method (7 and 11 molecules per square nm, respectively) is more than twice that measured by the ITC technique (3 and 4 molecules per square nm, respectively). The slight differences in the adsorption of MES and MUS on the gold surface are due to differences in the carbon chain length of the ligand molecules. In the case of MES, the formation of the Au-S bond is the dominant stage of the adsorption process, whereas for MUS, the ordering process and self-assembly of molecules on the gold surface are dominant.

In situ growth of L012-reduced gold nanoparticles-loaded graphitic carbon nitride nanocomposite for potential-resolved ratiometric electrochemiluminescence analysis

BackgroundMost electrochemiluminescence (ECL) analytical methods involve only changes in one single signal, which greatly limits their high sensitivity and stability for applied research. Potential-resolved electrochemiluminescence (PRECL), which provides calibrated analysis by self-correcting signal responses from dual channels, has attracted great interest in recent years. However, research on PRECL nanomaterials is still at an early stage. It is critical to develop a novel PRECL nanocomposite with high intensity in light emission, high resolution in potential separation, and reduced complexity in reaction systems for accurate detection. ResultsHere, a novel PRECL nanocomposite, L012-Au/g-C3N4, was synthesized by in situ growth of L012-reduced gold nanoparticles (L012-Au) on the surface of graphitic carbon nitride (g-C3N4) nanosheets. The g-C3N4 nanosheets served as effective carriers for L012 molecules and L012-Au, as well as efficient cathodic ECL emitters. With the addition of a single co-reactant (K2S2O8), two fully separated ECL peaks were observed around −1.3 V (ECL-1) and +0.6 V (ECL-2) at neutral conditions. The catalytic character of the incorporated gold nanoparticles accelerated the anodic ECL reaction and greatly enhanced the ECL intensity. Furthermore, an ECL mechanism based on the competitive relationship between K2S2O8 and dissolved oxygen was proposed. When dopamine (DA) was introduced into the PRECL reaction system, ECL-1 remained essentially unchanged, while ECL-2 intensity was significantly reduced. By analyzing the intensity ratio of ECL-2 to ECL-1 (I2/I1) to the detecting target, a ratiometric DA sensor with high sensitivity and stability was successfully constructed. SignificanceA nanocomposite L012-Au/g-C3N4 that can induce high-intensity ECL with two separated potentials in each polarity has been prepared by a simple synthetic method. The developed ratiometric sensor can eliminate systematic errors and improve accuracy. In addition, the multifunctionality of the nanocomposite and the necessity of only one co-reactant for neutral-condition ECL greatly reduced the reaction complexity. Our work offers new PRECL solutions to design highly sensitive and stable multi-response detection systems for in vitro diagnostics.

Genosensor based on polypyrrole and dendrimer-coated gold nanoparticles for human papillomavirus detection

Human Papillomavirus (HPV) is an often asymptomatic widespread sexually transmitted infection responsible for causing various health issues. Low-risk HPV primarily causes genital warts. High-risk HPV types are associated with several cancers, including cervical, anal, and oropharyngeal cancers, posing significant health risks. In this work, we developed an electrochemical biosensor for the detection and differentiation of HPV genotypes based on electropolymerized polypyrrole (PPy) and PAMAM dendrimer-coated gold nanoparticles (PAMAM-AuNPs) for the immobilization of a DNA probe for detecting different HPV genotypes. Electrochemical impedance spectroscopy (EIS), cyclic voltammetry (CV), and atomic force microscopy (AFM) were used to characterize the biosensor. AFM analysis revealed varied topographic surfaces associated with the increased peaks concerning the biosensor and against patient samples. Electrochemical responses indicated that the genosensor could detect HPV using plasmid (HPV 6, 16, 18, 31, and 33) and cDNA samples (HPV 6, 18, and 31) from infected patients. Different electrochemical profiles were obtained between high-risk and low-risk genotypes. The sensor presented an excellent analytical performance, presenting a lower LOD of 0.04 pg.µL−1 and 0.34 pg.µL−1 for plasmidial and cDNA samples, respectively. Electrochemical analysis pointed out the ability of the developed genosensor platform to differentiate the HPV genotypes. The proposed biosensor is a promising tool for detecting and monitoring HPV and related diseases such as cervical cancer.

Surface-Enhanced Raman Scattering Combined with Machine Learning for Rapid and Sensitive Detection of Anti-SARS-CoV-2 IgG

This work reports an efficient method to detect SARS-CoV-2 antibodies in blood samples based on SERS combined with a machine learning tool. For this purpose, gold nanoparticles directly conjugated with spike protein were used in human blood samples to identify anti-SARS-CoV-2 antibodies. The comprehensive database utilized Raman spectra from all 594 blood serum samples. Machine learning investigations were carried out using the Scikit-Learn library and were implemented in Python, and the characteristics of Raman spectra of positive and negative SARS-CoV-2 samples were extracted using the Uniform Manifold Approximation and Projection (UMAP) technique. The machine learning models used were k-Nearest Neighbors (kNN), Support Vector Machine (SVM), Decision Trees (DTs), logistic regression (LR), and Light Gradient Boosting Machine (LightGBM). The kNN model led to a sensitivity of 0.943, specificity of 0.9275, and accuracy of 0.9377. This study showed that combining Raman spectroscopy and a machine algorithm can be an effective diagnostic method. Furthermore, we highlighted the advantages and disadvantages of each algorithm, providing valuable information for future research.

Thermo-optical Properties of Gold Nanoparticles: Shape and Size Effects

Thermo-optical Properties of Gold Nanoparticles: Shape and Size Effects

A point-of-care testing strip based on a rationally designed antigen and antibody for fast and reliable Diquat poisoning detection: Ready for clinical application

AbstractDiquat (DQ) is a nonselective quick-acting herbicide, which can directly contaminate humans and the environment during improper use and production. The early diagnosis of DQ poisoning allows for patients to receive timely treatment. Here, a novel monoclonal antibody was screened based on the rational design and synthesis of a DQ hapten and complete antigen. With the custom-designed anti-DQ antibody, we developed a stable and specific immunochromatographic strip to recognize DQ within 10 ∼ 15 min in various biological samples. The test strips could recognize DQ at concentrations as low as 20 ng/mL and be read by the naked eye, reaching the detection level of liquid chromatography-mass spectrometry. Moreover, quantitative methods involving the use of immunochromatographic strips and ELISA were developed to continuously monitor DQ concentrations. DQ and paraquat (PQ) joint test strips were developed to simultaneously measure DQ and PQ. Notably, the clinical performance of the proposed test strips was evaluated in multiple hospitals and public health agencies. Taken together, our study provides the first clinical DQ-targeted colloidal gold immunochromatographic test strips with excellent performance, which are expected to be useful for clinical practice, environmental monitoring, food safety and scientific research.

SERS Sensor for Acetylcholine Detection Based on Covalent Organic Framework Hybridized Gold Nanoparticles As Nanozymes.

An innovative and potent nanozyme with reductase-like activity was developed by integrating the in situ synthesis of gold nanoparticles (Au NPs) onto the surface of a covalent organic framework (COF). Based on the reductase-like activity of the COF-hybridized Au NPs, this nanozyme could efficiently catalyze the reduction of 4-nitrophenol (4-NPH). Moreover, the prepared nanohybrid was utilized as an excellent surface-enhanced Raman scattering (SERS) substrate for highly sensitive SERS detection by combining the excellent adsorption properties of COFs and the large number of Raman hotspots between the high-density Au NPs. For the first time, 4-NPH was used as an SERS marker to detect the electron receptor acetylcholine (Ach), with high sensitivity; Ach acted as an inhibitor in this catalytic reaction. The linear range of Ach was 1.0 pM to 10 nM, the correlation coefficient was 0.993, the detection limit was approximately 0.3 pM with a signal-to-noise ratio (s/n) of 3, and the acceptable recovery in the serum was 97.2% to 104.5%. The results from this study show that the nanozyme-SERS system has great potential for chemical and bioassay applications.

Exploring In Vitro Antibiofilm Potential and In Vivo Toxicity Assessment of Gold Nanoparticles.

In this study, biogenically synthesized AuNPs were first characterized via UV visible spectroscopy, SEM, XRD, and FTIR followed by toxicity evaluation using mice model. UV-visible spectroscopy of biogenic AuNPs showed peaks at 540-549 nm, while FTIR spectrum showed various functional groups involving O-H, Amide I, Amide II, O-H, C-H groups, and so on. SEM showed the size variation from 30 to 60 nm. Antibacterial potential against pathogenic isolates showed bigger ZOI (31.0 mm) against Pseudomonas aeruginosa AuNPs. Antibiofilm activity showing up to 100% inhibition at 90 µg mL-1 concentration of AuNPs. Toxicity evaluation showed LD50 as 70 mg kg-1. Exposure to AuNPs caused significant changes in the levels of serum AST (p < 0.05) at 100-150 mg kg-1 of AuNPs exposure. Histopathology of male albino mice kidney and liver revealed that mice exposed to maximum concentration of AuNPs showed necrosis, cell distortion, and hepatocytes detachment. Present study showed that biologically synthesized AuNPs possess effective antimicrobial and biofilm inhibitory potential. AuNPs strong bactericidal effect even at lower concentration suggest that NPs could have excellent potential for combating pathogens. In conclusion, nanotechnology may revolutionize human life and medical industry by developing innovative drugs with the potential to treat diseases in shorter and noninvasive time period. Hence, in vitro biosafety and experimental observations followed by in vivo outcomes are crucial in shifting the novel therapeutics into medical practice thus leading further into their future development.

Lateral Flow Immunoassay for the Rapid Detection of Thiamethoxam in Tea Based on a SERS Tag Constructed by Phenolic-Mediated Coating Engineering.

Sensitive and accurate detection of thiamethoxam in tea is significant to ensuring consumer health. In this study, surface-enhanced Raman scattering (SERS) tags were prepared by using a polyphenol-mediated coating engineering strategy. This approach involved the self-assembly of tannic acid (TA) and self-polymerization of benzene-1,4-dithiol (BDT) on the surface of gold nanoparticles, resulting in the formation of Au@pBDT-TA. The SERS tags possess high Raman signals and antibody adsorption properties, avoiding the complex decoration or label steps of SERS reporters. We discovered that Au@pBDT-TA, composed of gold nanoparticles at 40 nm and a pBDT-TA thickness of 10 nm, was optimal for the development of the SERS lateral flow immunoassay (LFIA). In comparison to the gold nanoparticle-based LFIA, the SERS-LFIA demonstrated 4-fold and 720-fold enhancements in visual and quantitative limits of detection in buffer solution. The SERS-LFIA demonstrated quantitative limits of detection of 0.06 and 0.1 ng/g for black and green tea, respectively, with a broader linear range spanning over 2 orders of magnitude and a short detection time of 20 min. The proposed SERS-LFIA not only offers a sensitive and reliable method for monitoring thiamethoxam in tea but also possesses a versatile potential that can be easily adapted for the trace detection of various other targets.

NIR-II scattering gold superclusters for intravascular optical coherence tomography molecular imaging.

Currently, intravascular optical coherence tomography (IV-OCT) is limited to anatomical imaging, providing structural information about atherosclerotic plaque morphology, thrombus and dissection. Earlier detection and risk stratification would be possible through molecular characterization of endothelium but necessitates a purpose-engineered IV-OCT contrast agent. Here we developed gold superclusters (AuSCs) tailored to clinical instrumentation and integrated into clinically relevant workflows. AuSCs are aqueously dispersible clusters of closely packed small gold nanoparticles, affording plasmon hybridization to maximize light scattering at the IV-OCT laser line (~1,350 nm). A polymer coating fosters AuSC uniformity and provides a functionalizable handle, which we targeted to intravascular P-selectin, an early vascular endothelial marker of inflammation. In a rat model of intravascular inflammation, P-selectin-targeted AuSC facilitated IV-OCT molecular imaging, where the strength of the signal correlates with the severity of vascular inflammation.

Simple and disposable device based on gold nanoparticles modified screen-printed carbon electrode for detection of ciprofloxacin

Simple and disposable device based on gold nanoparticles modified screen-printed carbon electrode for detection of ciprofloxacin

Microwave-Based Rapid Green Synthesis of Gold Nanoparticles Utilizing a Notorious Weed (Mikania micrantha) Extract and Evaluation of their Biomedical Properties

Microwave-Based Rapid Green Synthesis of Gold Nanoparticles Utilizing a Notorious Weed (Mikania micrantha) Extract and Evaluation of their Biomedical Properties

Induced magnetic field and thermal regulation of synovial fluid flow through irregular surfaces with first-order slip and gold nanoparticles

ABSTRACT The current computational exploration develops a poroelastic model of the knee cartilage to elevate its temperature under cyclic sinusoidal loading. A contributing factor to the rise in temperature is this tissue’s viscous dissipation, which converts some of the mechanical energy supplied into heat. The manipulation of cartilage temperature is mostly reliant on the movement of synovial fluid inside the space between joints and within the permeable cartilage. We developed the region flow model in the presence of induced magnetic fields and gold nanoparticles, which enhanced the efficiency of joint lubrication by boosting the load-carrying capacity. We dealt with the problem for two different models. Model 1 assumes that viscosity is exponentially dependent on concentration. The shear thinning index in Model 2 is regarded as a concentration-dependent variable. We introduce these models for a complex wavy surface, where the first-order slip effect occurs. We modified the governing problem by assuming a long wavelength and a low Reynolds number. We followed up with a computational analysis utilizing the Rung–Kutta–Merson approach with Newton iteration in a shooting and matching strategy. We have conducted detailed comparisons between Model 1 and Model 2. The graphical findings have been shown for the distributions of velocity, temperature, and nanoparticle concentration. Additionally, the pressure gradients, streamlines, and axially generated magnetic fields have also been included. These results are presented for numerous physical parameters. The mechanics of trapping are thoroughly examined through the use of streamlines.

Size-Dependent Electrostatic Adsorption of Polymer-Grafted Gold Nanoparticles on Polyelectrolyte Brushes.

Designing a functional surface that selectively adsorbs nanoparticles based on their size and shape is essential for developing an advanced adsorption-based, postsynthesis nanoparticle separation device. We demonstrate selective adsorption of larger nanoparticles from solution onto a polyelectrolyte brush by tuning the salt concentration. Specifically, a positively charged polyelectrolyte brush is created by converting pyridine groups of poly(2-vinylpyridine) to n-methylpyridinium groups using methyl iodide. The adsorption kinetics and thermodynamics of poly(ethylene glycol)-grafted, negatively charged gold nanoparticles (diameters of 12 and 20 nm) were monitored as a function of salt concentration. In a salt-free solution, the polyelectrolyte brush adsorbs gold nanoparticles of both sizes. As the salinity increases, the areal number density of adsorbed nanoparticles monotonically decreases and becomes negligible at high salinity. Interestingly, there is an intermediate range of salt concentrations (i.e., 15-20 mM of NaCl) where the decrease in nanoparticle adsorption is more pronounced for smaller particles, leading to size-selective adsorption of the larger nanoparticles. As a further demonstration of selectivity, the polyelectrolyte brush is immersed in a binary mixture of 12 and 20 nm nanoparticles and found to selectively capture larger particles with ∼90% selectivity. In addition, the size distribution of as-synthesized gold nanoparticles, with an average diameter of 12 nm, was reduced by selectively removing larger particles by exposing the solution to polyelectrolyte brush surfaces. This study demonstrates the potential of a polyelectrolyte brush separation device to remove larger nanoparticles by controlling electrostatic interactions between polymer brushes and particles.

Electrochemical Immunosensor for the Sensitive Determination of Human Papillomavirus (HPV) 16 L1 Capsid Protein: A Leap in Cervical Cancer Diagnosis

Human Papillomavirus (HPV) is the principal cause of cervical cancer, which is still a prime universal health concern, especially in underdeveloped nations where access to advanced screening techniques is often restricted. Herein, we propose an electrochemical immunosensor for the determination of HPV 16 L1 protein, a key biomarker associated with cervical carcinogenesis. The developed immunosensor, employing glassy carbon electrode (GCE) enhanced with gold nanoparticles, provides a highly sensitive, specific, and cost-effective approach for early screening of cervical cancer. An optimized stepwise fabrication process which includes electrode surface modification and antibody immobilization, was used to enhance sensor performance. Characterization studies confirmed the effective modification of electrodes and the selectivity of immunoreactions. With an impressive limit of detection (LOD) of 0.033 fg mL−1, the immunosensor showed a linear response to L1 protein concentrations ranging from 0.1 fg mL−1 to 1 ng mL−1. Additionally, the immunosensor exhibits excellent specificity, stability, reproducibility, and regeneration capabilities. The performance of the immunosensor was compared with the enzyme-linked immunosorbent assay (ELISA) by analyzing clinical samples (positive: n = 12; healthy: n = 5) showed satisfactory results. The findings indicated that the proposed sensing platform has the potential to be utilized for the early diagnosis of cervical cancer.

Reusable SERS Platform of Femtosecond Laser Processed Substrate for Detection of Malachite Green

This study presents the development of highly efficient Surface-Enhanced Raman Scattering (SERS) substrates through femtosecond (fs) laser processing of crystalline silicon (Si), resulting in mountain-like microstructures. These microstructures, when decorated with gold nanoparticles (Au NPs), exhibit remarkable SERS performance due to the creation of concentrated hotspots. The enhanced Raman signals originate from the excitation of localized surface plasmon resonance (LSPR) of the Au NPs and the multi-scale rough morphology of the Si substrates. Finite-element method simulations confirm the electromagnetic field enhancement in narrow gaps, supporting the experimental observations. The fabricated substrates show high uniformity, oxidation resistance, long-term stability, and exceptional reproducibility, making them ideal for molecular detection, especially in food safety applications. A remarkable enhancement factor (EF) of 1010 is attained in the detection of Malachite Green (MG), boasting a limit of detection (LoD) as low as 10−14 M. This underscores the immense potential of this technique for achieving highly sensitive and dependable SERS-based sensing capabilities.

Combining Phototherapy and Gold-Based Nanomaterials: A Breakthrough in Basal Cell Carcinoma Treatment

Basal cell carcinoma (BCC) is the most common type of skin carcinoma worldwide. BCC development is the result of a complex interaction between environmental, phenotypic, and genetic factors. While conventional treatments such as surgery and topical therapies have demonstrated variable efficacy (some of them with limited efficacy), they are not free of adverse side effects, most of them debilitating. Thus, there is a notable gap in the literature regarding alternative and non-invasive therapeutic options. This review aims to address this gap, exploring the potential of photothermal therapy (PTT) combined with metallic nanoparticles, namely gold nanoparticles (AuNPs), as a minimally invasive treatment approach. Through a comprehensive review of the literature in the period from 2014 to 2024, using experimental investigations, this review seeks to elucidate the intricate interplay between genetic factors, environmental influences, and the tumor microenvironment in BCC disease progression, with PTT as a potential therapeutic strategy. Those studies confirmed an enhanced targeting of cancer cells and selective ablation of tumor tissue, using emerging technologies like PTT. A significant tumor reduction, often exceeding 50%, was observed, with some studies reporting complete elimination of the tumor. The main adverse effects noted were localized skin irritation and transient hyperpigmentation, but these were generally minimal and manageable, highlighting the promise of PTT as an effective treatment. Thus, by leveraging the unique properties of AuNPs to enhance the effectiveness of PTT, the targeting of cancer cells can more precisely occur, reducing collateral damage to healthy tissues. This approach not only aims to achieve better clinical results, but also contributes to the broader knowledge base in the field of BCC research. Continued research and clinical trials will be crucial in refining those techniques and validating their efficacy, ultimately paving the way for more effective and less invasive treatments for BCC.

Comparative Characteristics of Immunochromatographic Test Systems for Tylosin Antibiotic in Meat Products

Tylosin (TYL) is a macrolide antibiotic widely used in animal husbandry. Due to associated health risks, there is a demand for sensitive methods for mass screening of TYL in products of animal origin. This article describes the development of lateral flow immunoassays (LFIAs) for TYL detection using direct (anti-TYL antibodies conjugated with nanoparticles) and indirect antibody labeling (anti-species antibodies conjugated with nanoparticles and combined with native anti-TYL antibodies). The choice of LFIA conditions, such as concentrations of hapten–protein conjugates, specific antibodies, and gold nanoparticle (GNP) conjugates with antibodies, as well as incubation time of reagents and the concentration of detergent in the sample buffer, is presented. The achieved limits of TYL detection using LFIAs with indirect labeling were 0.8 ng/mL (visual) and 0.07 ng/mL (instrumental), compared to 4 ng/mL (visual) and 0.4 ng/mL (instrumental) for the case of direct labeling. The sensitivity of the LFIA using the indirect format was up to seven times higher, allowing the determination of the target analyte at low concentrations. TYL detection in ground meat using LFIA with indirect antibody labeling ranged from 76–119%.