Glyceryl Monooleate Research Articles

Dual-Effective Chronic Wounds Management System through a Monoglyceride Binary Blend Matrix Based Thermal-Responsive Phase-Transition Substrate.

A new monoglyceride-based heat-sensitive substrate is proposed, for the first time, as a wound management system. First, an appropriate portion of glyceryl monooleate (GMO) and glyceryl monostearate (GMS) is mixed to provide a thermal phase responsive matrix (GMO-GMS, GG). Subsequently, to improve the photothermal responsive and antibacterial performance, silver nanoparticles (Ag) decorated reduced graphene oxide (rGO) nanocomposite (rGO-Ag) is added to the GG matrix to obtain (GG-rGO-Ag). According to the systematic studies from uninfected, infected, and diabetic wound models, by applying near infrared (NIR) laser, the phase change of GG-rGO-Ag can be triggered to release Ag on demand for sterilization. More importantly, this smart GG substrate can also promote the production of vascular endothelial growth factor protein, thus serving as a NIR defined mufti-effective wound management system.

RIFM fragrance ingredient safety assessment, glyceryl monooleate, CAS Registry Number 111-03-5

The existing information supports the use of this material as described in this safety assessment.Glyceryl monooleate was evaluated for genotoxicity, repeated dose toxicity, reproductive toxicity, local respiratory toxicity, phototoxicity/photoallergenicity, skin sensitization, and environmental safety. Data show that glyceryl monooleate is not genotoxic. Data on glyceryl monooleate provide a calculated margin of exposure (MOE) > 100 for the repeated dose toxicity and reproductive toxicity endpoints. The skin sensitization endpoint was completed using the dermal sensitization threshold (DST) for reactive materials (64 μg/cm2); exposure is below the DST. The phototoxicity/photoallergenicity endpoints were evaluated based on ultraviolet (UV) spectra; glyceryl monooleate is not expected to be phototoxic/photoallergenic. The local respiratory toxicity endpoint was evaluated using the threshold of toxicological concern (TTC) for a Cramer Class I material, and the exposure to glyceryl monooleate is below the TTC (1.4 mg/day). The environmental endpoints were evaluated; glyceryl monooleate was found not to be persistent, bioaccumulative, and toxic (PBT) as per the International Fragrance Association (IFRA) Environmental Standards, and its risk quotients, based on its current volume of use (VoU) in Europe and North America (i.e., Predicted Environmental Concentration/Predicted No Effect Concentration [PEC/PNEC]), are <1.

Ocular lamellar crystalline gels for sustained release and enhanced permeation of resveratrol against corneal neovascularization

Corneal neovascularization (CNV) is the major cause of blindness after eye injury; however, only several drugs can be applied and the invasive administration ways (i.e., intravitreal injection and subconjunctival injection) are used. Resveratrol is a highly effective anti-VEGF agent against CNV. However, its applications are limited due to its strong hydrophobicity and instability. Here, we developed a resveratrol-loaded ocular lamellar crystalline gel (ROLG) for high inhibition of CNV. ROLGs were composed of resveratrol, glyceryl monooleate (GMO), ethanol, and water, and their lamellar crystalline structures were identified by polarizing light microscopy and small-angle X-ray scattering. High drug loading (4.4 mg/g) of ROLGs was achieved due to the hydrogen bonding between GMO and resveratrol. Resveratrol showed sustained release with 67% accumulative release in 7 h, which was attributed to the slow erosion of gels. Resveratrol in ROLGs had a high corneal permeation 3 times higher than resveratrol in hyaluronic acid suspensions (RHSs). ROLGs were administered to rats only once a day because of their strong retention on the cornea surface. ROLGs were safe due to the very little contact of ethanol in ROLGs to the cornea. CNV post-rat corneal alkaline injury was highly inhibited by ROLGs, resulting from the attenuation of corneal VEGF expression and then corneal healing was improved. The ROLG was a promising ocular medicine for the prevention of CNV.

Tailoring thixotropic mixed-lipid nanoconstructs of voriconazole for the management of Vulvovaginal candidiasis: Formulation, statistical optimization, in vitro characterization and in vivo assessment

Vulvovaginal candidiasis is a pervasive gynecological condition among women worldwide due to infection recurrence and resistance to conventional drugs. This calls for a novel formulation of alternative medication and with enhanced efficacy. This study aimed to fabricate mixed-lipid nanoconstructs (MLNCs) of voriconazole (VCZ) with a low concentration of lipids applying high shear homogenization and ultrasonication to form a semisolid formulation. Tefose 63 and Gelot 64 were employed as emulsifiers that are specified for vaginal preparations; as per their mucoadhesive properties and their texture enhancing characters, although usually used as lipids in different lipid carriers. A 24 factorial design was established and the optimized formulation was prepared using 10% total lipids, in which solid lipids (Sterotex NF: Glyceryl monostearate) ratio was 1.92:1 and the oils percentage was 30% (Maisine: Glyceryl monooleate, in the ratio of 1:1), and the emulsifiers mixture (Tefose 63: Gelot 64) ratio was 1:1, as 10% of total formulation weight. The optimized formulation with a viscosity of 964.49 ± 57.99 cp showed spherical nanoparticles (322.72 ± 15.11 nm) that entrapped 67.16 ± 3.45% of VCZ and exhibited release of 70.08 ± 2.87% in 8 h. The optimized formulation with high bioadhesive potentials significantly reduced the fungal burden in female Wistar rats infected with vaginal candidiasis, compared to the aqueous VCZ suspension (p < .05). Furthermore, in vivo histopathological findings proved the effectiveness and the safety of the optimized MLNCs formulation after vaginal application. Inclusively, MLNCs formulation could be a promising vaginal delivery system of VCZ for the treatment of vulvovaginal candidiasis.

Effects of conformational entropy on antiwear performances of organic friction modifiers

Organic friction modifiers (OFMs) are widely used in lubricants. However, the mechanism of their structure–activity relationship still needs further exploration. Herein, we found that glyceryl monoelaidate (GME) with a trans double bond, exhibits a better antifriction and antiwear performance than glyceryl monooleate (GMO), the cis isomer of GME. Glyceryl monostearate (GMS) with a saturated tail group is even better. The obvious different tribological performance of three different OFMs with slight molecular structure difference is attributed to the different entropy decreasing they form a boundary film on steel surfaces, which affected their surfacial-coverage. The disclosed conformation entropy effect on surfacial-coverage of boundary film could guide the design of more novel and effective OFMs.

Design, Formulation, In-Vitro and Ex-Vivo Evaluation of Atazanavir Loaded Cubosomal Gel

In this study, Atazanavir (ATZ) was designed into the Nano formulation called cubosomes to improve its bioavailability and curtail the adverse effects by the transdermal route delivery of ATZ -loaded cubosomes. Around twenty cubosomal formulations were formulated using a Central composite factorial design. The effect of glyceryl monooleate (GMO), surfactant (Pluronic F 127), and Cetyltrimethylammonium bromide (CTAB) were studied using processes of emulsification and homogenization. Different concentrations of independent variables on particle size distribution, zeta potential, and entrapment efficiency were determined. FTIR, DSC, X-ray, and SEM, TEM results established that the drug was encapsulated in the cubosomes. The results suggested that the optimal formula exhibited a particle size of 100±7.9 - 345±6.4 nm and entrapment efficiency ranging from 61±4.6 - 93±0.8, zeta potential values ranging from -24.51 to -32.45 mV, polydispersity index values ranged from 0.35±0.01-0.54±0.02 of ATZ. The in vitro studies showed a controlled release pattern of drug release up to 24h. The ATZ cubosomal gel application on the in vivo absorption studies of the drug was studied in rats and compared with oral ATZ solution. The in vivo study results showed that the transdermal application of ATZ cubosomal gel considerably improves the absorption of drug compared to that of oral ATZ solution and found that the relative bioavailability is 4.6 times greater of oral ATZ solution. Thus it can be concluded that the ATZ cubosomal gel application via transdermal delivery route has the potential in increasing the bioavailability of the drug.

Liquid Crystalline Nanoparticles for Nasal Delivery of Rosuvastatin: Implications on Therapeutic Efficacy in Management of Epilepsy.

In the present study we investigated the protective role of intranasal rosuvastatin liquid crystalline nanoparticles (Ros-LCNPs) against pentylenetetrazole (PTZ) induced seizures, increasing current electroshock (ICES) induced seizures, and PTZ-induced status epilepticus. From the dose titration study, it was evident that intranasal rosuvastatin (ROS), at lower dose, was more effective than oral and intraperitoneal ROS. The Ros-LCNPs equivalent to 5 mg/kg ROS were developed by hydrotrope method using glyceryl monooleate (GMO) as lipid phase. The high resolution TEM revealed that the formed Ros-LCNPs were cubic shaped and multivesicular with mean size of 219.15 ± 8.14 nm. The Ros-LCNPs showed entrapment efficiency of 70.30 ± 1.84% and release was found to be biphasic following Korsmeyer–Peppas kinetics. Intranasal Ros-LCNPs (5 mg/kg) showed significant increase in latency to PTZ-induced seizures and ICES seizure threshold compared to control and intranasal ROS solution. Additionally, intranasal Ros-LCNPs provided effective protection against PTZ-induced status epilepticus. No impairment in cognitive functions was observed following intranasal Ros-LCNPs. The results suggested that Ros-LCNPs could be an effective and promising therapeutics for the epilepsy management.

Design and Characterization of Glyceryl Monooleate-Nanostructures Containing Doxorubicin Hydrochloride.

Glyceryl monooleate (GMO) is one of the most popular amphiphilic lipids, which, in the presence of different amounts of water and a proper amount of stabilizer, can promote the development of well defined, thermodynamically stable nanostructures, called lyotropic liquid crystal dispersions. The aim of this study is based on the design, characterization, and evaluation of the cytotoxicity of lyotropic liquid crystal nanostructures containing a model anticancer drug such as doxorubicin hydrochloride. The drug is efficiently retained by the GMO nanosystems by a remote loading approach. The nanostructures prepared with different non-ionic surfactants (poloxamers and polysorbates) are characterized by different physico-chemical features as a function of several parameters, i.e., serum stability, temperature, and different pH values, as well as the amount of cryoprotectants used to obtain suitable freeze-dried systems. The nanostructures prepared with poloxamer 407 used as a stabilizer show an increased toxicity of the entrapped drug on breast cancer cell lines (MCF-7 and MDA-MB-231) due to their ability to sensitize multidrug-resistant (MDR) tumor cells through the inhibition of specific drug efflux transporters. Moreover, the interaction between the nanostructures and the cells occurs after just a few hours, evidencing a huge cellular uptake of the nanosystems.

Liquid crystalline nanoparticles for drug delivery: The role of gradient and block copolymers on the morphology, internal organisation and release profile

Amphiphilic polymers represent one of the main class of stabilizers for non-lamellar lyotropic liquid crystalline nanoparticles, being essential for their formation and stability. In the present study, poly(ethylene oxide)-block-poly(ε-caprolactone) (PEO-b-PCL) block copolymers and poly(2-methyl-2-oxazoline)-grad-poly(2-phenyl-2-oxazoline) (MPOx) gradient copolymers were incorporated as stabilizers in liquid crystalline nanoparticles prepared from glyceryl monooleate. The polymers were chosen according to their high biocompatibility and promising stealth properties, in order to develop safe and efficient drug delivery nanosystems. The physicochemical characteristics and fractal dimension of the resultant nanosystems were obtained from light scattering techniques, while their micropolarity and microfluidity from fluorescence spectroscopy. The effect of temperature, serum proteins and ionic strength on the physicochemical behavior was monitored. Their morphology was assessed by cryo-TEM, while their thermal behavior by microcalorimetry and high-resolution ultrasound spectroscopy. Their properties were dependent on the stabilizer chemistry and topology (block/gradient copolymer) and its concentration. Subsequently, resveratrol, as model hydrophobic drug, was loaded into the nanosystems, the entrapment efficiency was calculated and in vitro release studies were carried out, highlighting how the different stabilizer can differentiate the drug release profile. In conclusion, the proposed copolymers broaden the toolbox of polymeric stabilizers for the development of liquid crystalline nanoparticles intended for drug delivery applications.

Interfacial rheology, emulsifying property and emulsion stability of glyceryl monooleate-modified corn fiber gum

The present work aims to develop novel glyceryl monooleate (GMO)–modified corn fiber gum (CFG) emulsifiers (GMO–CFG) and investigate the role of the interfacial properties on emulsion stability. GMO–CFG with different degrees of substitution (DS) were prepared, and their interfacial rheology and emulsification were appraised for potential applications in stabilizing oil/water emulsions. Various oil/water interfacial properties (i.e., adsorption kinetics, viscoelasticity, and adsorbed amount) were determined as a function of DS by using interfacial shear rheology and quartz crystal microbalance with dissipation monitoring techniques. Hydrophobically modified CFG provides an increased capacity to produce fine droplets and stable emulsions. Esterification and its degree exert non-negligible effects on the critical micelle concentration, interfacial tension, interfacial adsorbed amount, and viscoelasticity of the interfacial layer. The rheological properties of the interfacial layers play an important role in macroscopic emulsion stability.

Hexosomes as Efficient Platforms for Possible Fluoxetine Hydrochloride Repurposing with Improved Cytotoxicity against HepG2 Cells.

The aim of this study was to investigate the feasibility of hexosomes (HEXs) as competent platforms for fluoxetine hydrochloride (FH) repurposing against HepG2 hepatocellular carcinoma. Different FH-loaded HEX formulations were prepared and optimized by the hot emulsification method. The HEX features such as particle size, ζ potential, and drug entrapment efficiency (EE%) can be tailored by tuning HEX components and fabrication conditions. The composition of the optimized FH hexosome (OFH-HEX) was composed of 3.1, 1.4, 0.5, 0.2, and 94.8% for glyceryl monooleate, oleic acid, pluronic F127, FH, and deionized water, respectively. The anionic OFH-HEX with a particle size of 145.5 ± 2.5 nm and drug EE% of 45.4 ± 1.2% was able to prolong the in vitro FH release, where only 19.5 ± 2.3% released in phosphate-buffered saline (PBS) pH 7.4 after 24 h. Contrarily, HEX rapidly released FH in acetate buffer pH 5.5 and achieved a 90.5 ± 4.7% release after 24 h. The obtained HEX showed an improved cellular internalization in a time-dependent manner and enhanced the cytotoxicity (2-fold higher than FH solution). The current study suggests the potential of FH-HEX as a possible anticancer agent against hepatocellular carcinoma.

AT101-Loaded Cubosomes as an Alternative for Improved Glioblastoma Therapy.

IntroductionAT101, the R-(-)-enantiomer of the cottonseed-derived polyphenol gossypol, is a promising drug in glioblastoma multiforme (GBM) therapy due to its ability to trigger autophagic cell death but also to facilitate apoptosis in tumor cells. It does have some limitations such as poor solubility in water-based media and consequent low bioavailability, which affect its response rate during treatment. To overcome this drawback and to improve the anti-cancer potential of AT101, the use of cubosome-based formulation for AT101 drug delivery has been proposed. This is the first report on the use of cubosomes as AT101 drug carriers in GBM cells.Materials and MethodsCubosomes loaded with AT101 were prepared from glyceryl monooleate (GMO) and the surfactant Pluronic F-127 using the top–down approach. The drug was introduced into the lipid prior to dispersion. Prepared formulations were then subjected to complex physicochemical and biological characterization.ResultsFormulations of AT101-loaded cubosomes were highly stable colloids with a high drug entrapment efficiency (97.7%) and a continuous, sustained drug release approaching 35% over 72 h. Using selective and sensitive NMR diffusometry, the drug was shown to be efficiently bound to the lipid-based cubosomes. In vitro imaging studies showed the high efficiency of cubosomal nanoparticles uptake into GBM cells, as well as their marked ability to penetrate into tumor spheroids. Treatment of GBM cells with the AT101-loaded cubosomes, but not with the free drug, induced cytoskeletal rearrangement and shortening of actin fibers. The prepared nanoparticles revealed stronger in vitro cytotoxic effects against GBM cells (A172 and LN229 cell lines), than against normal brain cells (SVGA and HMC3 cell lines).ConclusionThe results indicate that GMO-AT101 cubosome formulations are a promising basic tool for alternative approaches to GBM treatment.

Naringenin loaded multifunctional nanoparticles to enhance the chemotherapeutic efficacy in hepatic fibrosis.

Naringenin is highly potent dietary phenolic compound (Flavonoids) found as a major bioactive in citrus fruits. The low solubility of Naringenin, decreases its availability at the site of action by hindering solubility and transportation across the biological membrane. Naringenin loaded nanoparticles enhance the solubility and drug availability at site of action. Naringenin solid lipid nanoparticles were prepared by emulsification and homogenization method using GMO (glycerylmonooleate) and TPGS (Tocopheryl polyethylene glycol succinate) as co-stabilizer. Physico-chemical characterization confirmed the particles were of nanometer size, smooth and spherical morphology. The FTIR and DSC studies conforms that drug and polymers are compatible. The in-vitro study shows prolong and sustained release of Naringenin upto 90 Hrs. In-vivo studies conforms the prolonged and efficient treatment of Hepatic fibrosis. The liver enzymes and pro inflammatory cytokines in blood got significantly reversed with the rats exposed to Naringenin nanoparticle indicating reduced liver damage and fibrosis. Nanoformulation enhances the bioavailability of Naringenin and liver specific delivery of the same, which up-regulates MMP-2 hepatic proteins resulting in reduced liver fibrosis.

Lipid membranes exposed to dispersions of phytantriol and monoolein cubosomes: Langmuir monolayer and HeLa cell membrane studies

The interactions of liquid-crystalline nanoparticles based on lipid-like surfactants, glyceryl monooleate, monoolein (GMO) and 1,2,3-trihydroxy-3,7,11,15-tetramethylhexadecane, phytantriol (PT) with selected model lipid membranes prepared by Langmuir technique were compared. Monolayers of DPPC, DMPS and their mixture DPPC:DMPS 87:13 mol% were used as simple models of one leaflet of a cell membrane. The incorporation of cubosomes into the lipid layers spread at the air-water interface was followed by surface-pressure measurements and Brewster angle microscopy. The cubosome - membrane interactions lead to the fluidization of the model membranes but this effect depended on the composition of the model membrane and on the type of cubosomes. The interactions of PT cubosomes with lipid layers, especially DMPS-based monolayer were stronger compared with those of GMO-based nanoparticles. The kinetics of incorporation of cubosomal material into the lipid layer was influenced by the extent of hydration of the polar headgroups of the lipid: faster in the case of smaller, less hydrated polar groups of DMPS than for strongly hydrated uncharged choline of DPPC. The membrane disrupting effect of cubosomes increased at longer times of the lipid membrane exposure to the cubosome solution and at larger carrier concentrations. Langmuir monolayer observations correspond well to results of studies of HeLa cells exposed to cubosomes. The larger toxicity of PT cubosomes was confirmed by MTS. Their ability to disrupt lipid membranes was imaged by confocal microscopy. On the other hand, PT cubosomes easily penetrated cellular membranes and released cargo into various cellular compartments more effectively than GMO-based nanocarriers. Therefore, at low concentrations, they may be further investigated as a promising drug delivery tool.

Effect of double bond in unsaturated long-chain monoglyceride in self-emulsified nanoemulsion on tight junction opening

Unsaturated long chain monoglycerides (LCMs) used to formulate self-emulsified nanoemulsion (SEN) are varied in their degree of unsaturation which may influence their activities on membrane permeability. Therefore, this study highlights the impact of double bond in LCMs on the tight junctions of Madin-Darby Canine Kidney (MDCK) cell monolayer. Two LCMs, Glyceryl monooleate (one double bond) and Glyceryl monolinoleate (two double bonds) were formulated into SENs (SEN2 and SEN3, respectively) with Glyceryl tricaprylate and PEG-40 hydrogenated castor oil (1:1:2), and compared to the SEN (SEN1) consisted of only Glyceryl tricaprylate and PEG-40 hydrogenated castor oil (1:4). Lucifer Yellow (LY, MW 457) or Fluorescein isothiocyanate–Dextran4K (FD4, MW 3000-5000) was added to the aqueous phase of the SENs and tested for their transport across the cell monolayer. The cumulative transport of LY and FD4 achieved by SEN2 and SEN3 were significantly (p < 0.05) higher than those in phosphate buffer, 0.5% PEG-40 hydrogenated castor oil, and SEN1, indicating that the tight junctions were opened by the SENs containing LCMs. The cumulative transport of FD4 achieved by SEN3 was also 2-3 folds higher than SEN2 (p < 0.05). Therefore, LCM with two double bonds have greater potency of opening tight junction than LCM with a single double bond in SEN formulation.

Effective Transcutaneous Delivery of Hyaluronic Acid Using an Easy-to-Prepare Reverse Micelle Formulation

The skin loses its moisture with advancing age, causing cosmetic issues such as wrinkles. In addition, the loss of moisture leads to hypersensitivity to external stimuli such as UV light. Transcutaneous supplementation with hyaluronic acid (HA) is an effective and safe method of recovering the moisturizing function and elasticity of the skin. However, the transcutaneous delivery of HA remains challenging owing to the barrier function of the stratum corneum (SC) layer. To penetrate the SC barrier, we used a reverse micelle formulation that does not require high energy consumption processes for preparation. We aimed to enhance the skin permeability of HA by incorporating glyceryl monooleate—a skin permeation enhancer—into the formulation. A fluorescently-labeled HA-loaded reverse micelle formulation showed significantly enhanced permeation across Yucatan micro pig skin. Fourier transform infra-red spectroscopy of the surface of the skin treated with the reverse micelle formulation showed blue shifts of the CH2 symmetric/asymmetric stretching peaks, indicating a reduction in the barrier function of the SC. Further study revealed that HA was released from the reverse micelles at the hydrophobic/hydrophilic interface between the SC and the living epidermis. The results demonstrated that our reverse micellar system is an easy-to-prepare formulation for the effective transcutaneous delivery of HA.

Enhanced nose-to-brain delivery of tranilast using liquid crystal formulations

Intranasal administration is poised as a competent method in delivering drugs to the brain, because the nasal route has a direct link with the central nervous system bypassing the formidable blood-brain barrier. C17-monoglycerol ester (MGE) and glyceryl monooleate (GMO) as liquid crystal (LC)-forming lipids possess desirable formulation characteristics as drug carriers for intranasally administered drugs. This study investigated the effect of LC formulations on the pharmacokinetics of tranilast (TL), a lipophilic model drug, and its distribution in the therapeutic target regions of the brain in rats. The anatomical biodistribution of LC formulations was monitored using micro-computed tomography tandem in vivo imaging systems. MGE and GMO effectively formed LC with suitable particle size, zeta potential, and viscosity supporting the delivery of TL to the brain. MGE and GMO LC formulations enhanced brain uptake by 10- to 12-fold and 2- to 2.4- fold, respectively, compared with TL solution. The olfactory bulb had the highest TL concentration and fluorescent signals among all the brain regions, indicating a direct nose-to-brain delivery pathway of LC formulations. LC-forming lipids, MGE and GMO, are potential biomaterials in formulations intended for intranasal administration.

Formulation and evaluation of cubosomes containing colchicine for transdermal delivery.

Gout is a common inflammatory disease that is characterized by the deposition of serum urate crystals in the synovial fluids and joints. In spite of high efficiency of colchicine (COL) in treatment of gout, it has potential side effects associated with its oral administration. This study was aimed to enhance COL bioavailability and minimize associated side effects through transdermal delivery of COL-loaded cubosomes. Eight cubosomal dispersions were prepared according to Box-Behnken factorial design and the effect of COL, glyceryl monooleate (GMO), and surfactant (P407) concentrations on particle size distribution, zeta potential, and entrapment efficiency were assessed. The results revealed that the optimum formula exhibited a mean particle size of 73.07 ± 2.18nm and entrapped 32.40 ± 2.33% of COL. The influence of transdermal application of COL cubosomal gel on the in vivo absorption of the drug was studied in rats compared with oral COL solution. The results of in vivo study showed that transdermal application of COL cubosomal gel significantly improves the drug absorption compared with oral COL solution, with evidence of a relative bioavailability of 4.6 times greater than that of oral COL solution. In conclusion, transdermal application of COL cubosomal gel may be a promising delivery system for enhancing the bioavailability of COL. Graphical abstract.

Freeze-Dried Clopidogrel Loaded Lyotropic Liquid Crystal: Box-Behnken Optimization, In-Vitro and In-Vivo Evaluation.

Clopidogrel (CLP) suffers from extensive first pass metabolism results in a negative impact on its oral systemic bioavailability. Cubosomes are Lyotropic Liquid Crystalline (LLC) nano-systems comprising monoolein, a steric stabilizer and an aqueous system, it considered a promising carrier for different pharmaceutical compounds. Box-Behnken Design (BBD) is an efficient tool for process analysis and optimization skipping forceful treatment combinations. The study was designed to develop freeze-dried clopidogrel loaded LLC (cubosomes) for enhancement of its oral bioavailability. A 33 BBD was adopted, the studied independent factors were glyceryl monooleate (GMO lipid phase), Pluronic F127 (PL F127steric stabilizer) and polyvinyl alcohol powder (stabilizer). Particle Size (PS), Polydispersity Index (PDI) and Zeta Potential (ZP) were set as independent response variables. Seventeen formulae were prepared in accordance with the bottom up approach and in-vitro evaluated regarding PS, PDI and ZP. Statistical analysis and optimization were achieved using design expert software®, then the optimum suggested formula was prepared, in-vitro revaluated, freeze-dried with 3% mannitol (cryoprotectant), solid state characterized and finally packed in hard gelatin capsule for comparative in-vitro release and in-vivo evaluation to Plavix®. Results of statistical analysis of each individual response revealed a quadratic model for PS and PDI where a linear model for ZP. The optimum suggested formula with desirability factor equal 0.990 consisting of (200 mg GMO, 78.15 mg PL F127 and 2% PVA). LC/MS/MS study confirmed significant higher Cmax, AUC0-24h and AUC0-∞ than that of Plavix®. The results confirm the capability of developed carrier to overcome the low oral bioavailability.

Wound healing of laser injured skin with glycerol monooleicate cubic liquid crystal

Laser has found increasingly wider applications in the medical filed, but laser is likely to cause damage to patients’ skin. In this experiment, we were surprised to find that glyceryl monooleate (GMO)-based cubic liquid crystal had excellent healing effect on the skin of guinea pigs damaged by laser. Transepidermal water loss (TEWL), H.E. pathology, Masson trichrome dyeing, interleukin-6 (IL-6) levels and the percutaneous depth of fluorescein isothiocyanate (FITC) dyeing were used to evaluate the therapeutic effect of GMO-based cubic liquid crystals against laser damage of different degrees among guinea pigs. GMO-based cubic liquid crystals had an obvious effect in the treatment of slight and moderate laser damage. This finding may provide a effective medical treatment protocols for laser skin damage.