Globe Thermometer Research Articles

A Low-Cost Sensor Network for Real-Time Thermal Stress Monitoring and Communication in Occupational Contexts.

The MoBiMet (Mobile Biometeorology System) is a low-cost device for thermal comfort monitoring, designed for long-term deployment in indoor or semi-outdoor occupational contexts. It measures air temperature, humidity, globe temperature, brightness temperature, light intensity, and wind, and is capable of calculating thermal indices (e.g., physiologically equivalent temperature (PET)) on site. It visualizes its data on an integrated display and sends them continuously to a server, where web-based visualizations are available in real-time. Data from many MoBiMets deployed in real occupational settings were used to demonstrate their suitability for large-scale and continued monitoring of thermal comfort in various contexts (industrial, commercial, offices, agricultural). This article describes the design and the performance of the MoBiMet. Alternative methods to determine mean radiant temperature (Tmrt) using a light intensity sensor and a contactless infrared thermopile were tested next to a custom-made black globe thermometer. Performance was assessed by comparing the MoBiMet to an independent mid-cost thermal comfort sensor. It was demonstrated that networked MoBiMets can detect differences of thermal comfort at different workplaces within the same building, and between workplaces in different companies in the same city. The MoBiMets can capture spatial and temporal differences of thermal comfort over the diurnal cycle, as demonstrated in offices with different stories and with different solar irradiances in a single high-rise building. The strongest sustained heat stress was recorded at industrial workplaces with heavy machinery.

Simple physiological indicators of 1„2 Santa inês × 1„2 Dorper crossbred sheep raised in the municipality of Mirador, Maranhão, Brazil

In this study we aimed to evaluate the influence of environmental differences caused by day shifts on the physiological indicators of crossbred ½ Santa Inês × ½ Dorper sheep raised in a semi-intensive system. For this, 12 animals with an average weight of 35.00 ± 5.00 kg were allocated in a completely randomized design, with two treatments (morning shift and afternoon shift) and six replicates per treatment. The environmental variables (temperature (ºC) and relative humidity (%)) were collected using a digital thermo-hygrometer. The black globe temperature and humidity index was calculated using temperature values of the black globe thermometer and dew point. The following physiological indicators were measured in the animals: respiratory rate (mov/min); heart rate (beats/min); rectal temperature (ºC); and surface temperature (ºC). In the morning shift, the average values of air temperature and relative humidity were 31.71ºC and 88.66%, respectively. In the afternoon, the average air temperature was 33.91ºC, while the relative humidity was 62.66%. The highest mean globe temperature and humidity index was observed in the afternoon shift (87.75). The physiological indicators showed the highest mean values in the afternoon shift: respiratory rate 73.72 mov/min; heart rate 81.27 beats/min; rectal temperature 39.98ºC; surface temperature 34.76ºC. The crossbred 1„2 Santa Inês × 1„2 Dorper sheep reared in a semi-intensive system showed signs of thermal discomfort.

Playing on natural or artificial turf sports field? Assessing heat stress of children, young athletes, and adults in Hong Kong

Exercising in an unusually hot environment may aggravate exertional heat illness. Turf material significantly affects the microenvironment and heat-stress sensation of sports-field users. However, the difference in human- biometeorological effects between different sports-field turf materials demands further investigation. This study compared artificial (AT) with natural turf (NT) fields, investigating three age groups (children, young athletes, and adults), two physical activities (playing soccer and walking), and three heat stress indicators (HI, Heat Index; WBGT, Wet Bulb Globe Thermometer; and COMFA, COMfort FormulA). The results showed heat-stress underestimation by HI and WBGT. In contrast, COMFA, incorporating comprehensive environmental and human physiological parameters, provided a more targeted and reliable heat-stress assessment. COMFA indicated a longer heat-stress duration exercising at AT than NT. Compared to NT, children suffered a 24% longer “Extreme danger” duration at AT in sunny daytime. The AT-NT difference in human-biometeorological effect was limited concerning human convection, evaporation, metabolic heat, and emitted longwave radiation, but was considerable in human absorbed radiation. AT had lower albedo than NT, hence field users absorbed more upward longwave radiation but less upward shortwave radiation, highlighting important control by the radiant environment. NT sports fields are recommended for a healthy outdoor thermal environment, especially for children.

Anisotropic radiation source models for computational thermal manikin simulations based on common radiation field measurements

The balanced design of extreme heat adaptation strategies that engineer the radiative properties of infrastructure or human clothing requires realistic methods of spectrally and spatially resolving irradiation from a complex built environment on the human body. Current irradiation measurement methods oversimplify the human body as points, spheres, or cylinders. In contrast, computational thermal manikins often used in convective simulations resolve the 3D body shape but have predominantly been used to model radiation exchange only with a large isothermal surrounding. To bridge this gap, we formulated six anisotropic radiation source models for thermal manikin simulations based on net-radiometer 6-directional, acrylic globe, and cylindrical radiation thermometer measurements. In some cases, we augmented the models with solar zenith angle and theoretical global solar irradiation. The models predict similar diffuse longwave (LW) as well as direct and diffuse shortwave (SW) radiation for measurements taken during a representative hot, sunny day with an unobstructed sky view. For three times of the day, we simulated irradiation distributions on an average male thermal manikin. Comparing the resulting irradiation maps showed that the direct SW component should be based on solar direction instead of the 6-directional "box" approach. Results also highlight the importance of the diffuse irradiation implementation method. However, experimental benchmarking (e.g., using physical thermal manikins in real-world settings) is required to determine whether the volumetric, box, or spherical diffuse source specification is the most realistic approach. The introduced techniques can be applied to realistically simulate irradiation from real-world built environments on a wide range of individuals.

A simple technique for the traditional method to estimate mean radiant temperature.

The mean radiant temperature (Tmrt) is the most important meteorological factor influencing human thermal comfort in urban areas. Numerous methods have been implemented for estimating Tmrt using measured radiometer or thermometer data, and exhibit different levels of accuracy. This study presents a simple technique based on the traditional method (Tmrt_TM) to estimate Tmrt by utilizing measured radiation data from the radiometers. The estimated Tmrt values from the six-directional method (Tmrt_SM) and two black globe thermometer methods (Tmrt_BG and Tmrt_BGv) at two stations (sky view factor 0.69 and 0.94) in Jeju, Republic of Korea, for 8days (5 sunny days, 3 (semi-) cloudy days) in spring and summer were used to validate the Tmrt_TM. The results showed that the mean differences between Tmrt_TM and Tmrt_SM were within the required accuracy for comfort in ISO 7726 (± 2 ℃) on sunny days and were reduced to 0.1-0.3 ℃ in high Tmrt conditions such as clear summer days. The Tmrt_BG in most sunny and semi-cloudy days and Tmrt_BGv on all days resulted in large mean differences from the Tmrt_TM that exceeded the required accuracy for thermal stress in ISO 7726 (± 5 ℃). Therefore, both black globe thermometer methods should be used carefully when estimating Tmrt, especially during sunny days. The correlations between Tmrt_TM and Tmrt_SM were highly significant, 0.93 on all days (p = 0.01). The newly developed regression equations between Tmrt_TM and Tmrt_SM could reduce mean differences within 0.5 ℃ for all days, and their r2 values exceeded 0.87. Therefore, the simple Tmrt_TM technique can be used for Tmrt estimation in human thermal comfort studies.

Case Study of Thermal Comfort in a Temporary Shelter

In Latvia to perform COVID-19 tests as well as for temporary shelters in case of a local disease outbreak the persons were located in special tents. Such practice was not only performed locally but also in other countries like the USA, UK, Russia, etc. The wide usage of tents was possible as the outbreak happened during the warm period of the year. At the same time, the indoor climate of tents can be quite unbearable during the warm summer days. Also, the situation was not getting better as fast as the prognosis, and the crisis was still ongoing during the winter period. Therefore, to test the thermal comfort of such temporary shelter’s measurements were performed. The thermal comfort was measured in a tent from 27th May to 28th September 2020. The data was logged with three different measuring devices inside of the shelter as well as outside air parameters like temperature and solar radiation was logged. The results show the rapidly changing indoor temperature which reaches 40°C during the daytime and falls to 10°C at night. The data of the globe thermometer to analyze the influence of radiation from tent canvas was also studied and showed that there is no noticeable heat radiation from external walls. The PMV measurements showed that the thermal comfort is very low as the PMV values were outside the range of -1 to 1 for 57% of the time. The influence of the precipitation was also noted, and the results showed that the adiabatic cooling effect is very variable but in general does not noticeably change the indoor temperature, the average temperature decrease was only 1 °C, but for a specific case it reached 10°C.

Outdoor performance of the black globe temperature sensor on a hot and humid tropical region

ABSTRACT A crucial variable to evaluate thermal comfort is the mean radiant temperature (Tmrt). In this paper we evaluate the performance of the 150 mm black globe thermometer to provide reliable Tmrt values for outdoor settings in Singapore. Accurate Tmrt values are calculated by the method of integral radiation measurements. Based on these, the mean convection coefficient of the black globe has been re-calibrated. Results show an improvement in the estimation of Tmrt with the new coefficient in comparison with the default version suggested in ISO7726:1998. Increasing the averaging periods of the measured variables improved the performance of the derived mean convective coefficients to estimate Tmrt. During clear skies day and for 10-min averaged data, RMSE for Tmrt reduce to 3.9 °C (7.4 °C for ISO7726:1998 coefficient) with an overestimation on high incoming solar radiation periods and an underestimation during the morning and evening (low solar elevation). During overcast dry conditions an underestimation of Tmrt is also expected which is higher in the rain/wet periods. The mean convective coefficient presented in this work can provide improved estimations of Tmrt relevant for outdoor thermal comfort studies in hot and humid tropical climates like Singapore.

Application of IR camera and pyranometer for estimation of longwave and shortwave mean radiant temperatures at multiple locations

The thermal environment experienced by human is significantly affected by the radiant heat. Information regarding the effect of radiant temperature on the occupants in a building is necessary for a comprehensive evaluation of indoor thermal comfort and for a corresponding control of the building's passive and active systems. This paper presents a real-time estimation method of MRT distributions in indoor spaces that does not require a direct installation of measurement devices at occupant locations. To consider the effect of longwave radiation, a pan-tilt IR camera was applied to remotely measure interior surface temperatures. For shortwave radiation, a single pyranometer installed outside was applied to estimate diffuse and direct irradiance at the occupant locations. The real-time MRT monitoring process and the Pan-tilt IR scanning system⁺ are derived. An experiment was performed to validate the applicability of the derived MRT monitoring process. The MRT at three target locations were measured by a globe thermometer and also estimated by the derived method. The measured and estimated MRT values were compared, and the results showed high goodness of fits as the R2 values were higher than 0.80 for all target locations. The monitoring results confirm that the MRT value can differ up to 15 °C according to occupant locations because of solar radiation. This paper discusses the applicability in various fields and possible future works of the proposed MRT estimation process.

Experimental and Theoretical Study on the Internal Convective and Radiative Heat Transfer Coefficients for a Vertical Wall in a Residential Building

Experimental studies on internal convective (CHTC) and radiative (RHTC) heat transfer coefficients are very rarely conducted in real conditions during the normal use of buildings. This study presents the results of measurements of CHTC and RHTC for a vertical wall, taken in a selected room of a single-family building during its everyday use. Measurements were performed using HFP01 heat flux plates, Pt1000 sensors for internal air and wall surface temperatures and a globe thermometer for mean radiant temperature measured in 10 min intervals. Measured average CHTC and RHTC amounted to 1.15 W/m2K and 5.45 W/m2K, compared to the 2.50 W/m2K and 5.42 W/m2K recommended by the EN ISO 6946, respectively. To compare with calculated CHTC, 14 correlations based on the temperature difference were applied. Obtained values were from 1.31 W/m2K (given by Min et al.) to 3.33 W/m2K (Wilkes and Peterson), and in all cases were greater than the 1.15 W/m2K from measurements. The average value from all models amounted to 2.02 W/m2K, and was greater than measurements by 75.6%. The quality of models was also estimated using average absolute error (AAE), average biased error (ABE), mean absolute error (MAE) and mean bias error (MBE). Based on these techniques, the model of Fohanno and Polidori was identified as the best with AAE = 68%, ABE = 52%, MAE = 0.41 W/m2K and MBE = 0.12 W/m2K.

A Case Study on the Assumption of Mean Radiant Temperature Equals to Indoor Air Temperature in a Free-Running Building

Thermal comfort is basically affected by environmental (mean radiant temperature, indoor air temperature and relative humidity and air velocity) and personal parameters (clothing value and activity level). Mean Radiant Temperature is the most complicated parameter among all thermal comfort parameters due to the difficulty of measurement and calculation processes. Calculation methods are not preferred by the researchers because of the complexity of obtaining angle factors while the measurement methods require very expensive devices such as globe thermometers and radiometers. On the other hand, assumptions are commonly used in thermal comfort studies because of their simplicities. One of the most frequently used assumptions expresses the equality of mean radiant temperature to indoor air temperature. However, the accuracy of this assumption needs further experimental research in order to evaluate thermal comfort, especially in free-running buildings. To this aim, this study proposes to determine the accuracy of the assumption of mean radiant temperature equals to indoor air temperature in a free-running building where Adaptive Thermal Comfort approach is applied in summer condition. Environmental parameters are measured via objective sensors, while adaptive thermal comfort is assessed by a software program. The statistical results show that there are significant deviations between two parameters in summer conditions for a free-running building.

A Case-Series Observation of Sweat Rate Variability in Endurance-Trained Athletes.

Adequate fluid replacement during exercise is an important consideration for athletes, however sweat rate (SR) can vary day-to-day. The purpose of this study was to investigate day-to-day variations in SR while performing self-selected exercise sessions to evaluate error in SR estimations in similar temperature conditions. Thirteen endurance-trained athletes completed training sessions in a case-series design 1x/week for a minimum 30 min of running/biking over 24 weeks. Body mass was recorded pre/post-training and corrected for fluid consumption. Data were split into three Wet-Bulb Globe Thermometer (WBGT) conditions: LOW (<10 °C), MOD (10–19.9 °C), HIGH (>20 °C). No significant differences existed in exercise duration, distance, pace, or WBGT for any group (p > 0.07). Significant differences in SR variability occurred for all groups, with average differences of: LOW = 0.15 L/h; MOD = 0.14 L/h; HIGH = 0.16 L/h (p < 0.05). There were no significant differences in mean SR between LOW-MOD (p > 0.9), but significant differences between LOW-HIGH and MOD-HIGH (p < 0.03). The assessment of SR can provide useful data for determining hydration strategies. The significant differences in SR within each temperature range indicates a single assessment may not accurately represent an individual’s typical SR even in similar environmental conditions.

Mean Radiant Temperature Measurements through Small Black Globes under Forced Convection Conditions

One of the most critical variables in the field of thermal comfort measurements is the mean radiant temperature which is typically measured with a standard 150 mm black globe thermometer. This is also the reference instrument required for the assessment of heat stress conditions by means of the well-known Wet Bulb Globe Temperature index (WBGT). However, one of the limitations of this method is represented by the relatively long response time. This is why in recent years there has been a more and more pressing need of smart sensors for controlling Heating Ventilation and Air Conditioning (HVAC) systems, and for pocket heat stress meters (e.g., WBGT meters provided with table tennis balls). Although it is widely agreed that there is a clear advantage of small probes in terms of response times, their accuracy is a still a debated matter and no systematic studies aimed at metrologically characterizing their performances are actually available, due to the difficulty of reproducing measuring conditions such as a black enclosure at uniform temperature. In this paper the results of a metrological analysis of two small globes (38 and 50 mm diameter) carried out by means of an experimental apparatus specifically designed to reproduce a black uniform enclosure are presented and discussed. Experimental results revealed a systematic underestimation of the mean radiant temperature predicted by small globes of more than 10 °C in forced convection and at high radiative loads.

Improved methods for estimating mean radiant temperature in hot and sunny outdoor settings.

Thermal comfort research has utilized various sensors and models to estimate the mean radiant temperature (MRT) experienced by a human, including the standard black globe thermometer (SGT), acrylic globe thermometers (AGT), and cylindrical radiation thermometers (CRT). Rather than directly measuring radiation, a temperature is measured in the center of these low-cost sensors that can be related to MRT after theoretically accounting for convection. However, these sensors have not been systematically tested under long-term hot and clear conditions. Further,under variable weather conditions, many issues can arise due to slow response times, shape, inaccuracies in material properties and assumptions, and color (albedo, emissivity) inconsistencies. Here, we assess the performance of MRT produced by various heat transfer models, with and without new averagesurface temperature ([Formula: see text]) correction factors, using five instruments-the SGT (15 cm, black), tan and black CRTs, gray and black 38 mm AGTs-compared to 3D integral radiation measurements. Measurements were taken on an unobscured roof throughout summer-to-early-fall months in Tempe, Arizona, examining 58 full-sun days. Deviations without correcting for asymmetrical surface heating-found to be the main cause of errors-reached ± 15-20 °C MRT. By accounting for asymmetric heating through [Formula: see text] calculations, new corrective algorithms were derived for the low-cost sensor models. Results show significant improvements in the estimated MRT error for each sensor (i.e., ∆MRTmodel - IRM) when applying the [Formula: see text] corrections. The tan MRTCRT improved from 1.9 ± 6.2 to -0.1 ± 4.4 °C, while the gray AGT and SGT showed improvements from -1.6 ± 7.2 to -0.4 ± 6.3 °C and - 6.6 ± 6.4 to - 0.03 ± 5.7 °C, respectively. The new corrections also eliminated dependence on other meteorological factors (zenith, wind speed). From these results, we provide three simple equations for CRT, AGT, and SGT correction for future research use under warm-hot and clear conditions. This study is the most comprehensive empirical assessment of various low-cost instruments with broad applicability in urban climate and biometeorological research.

Comparison and modification of measurement and simulation techniques for estimating Tmrt in summer and winter in a severely cold region

Mean Radiant Temperature (Tmrt) is a crucial indicator to assess urban radiant and thermal environments. In this study, Tmrt derived from the globe thermometer method and three simulation models (SOLWEIG, RayMan, and ENVI-met) were analyzed and modified based on the standard six-directional method (Tmrt(six)). Performances of the techniques were compared for two contrasting seasons, summer and winter, and at sites with different degrees of openness. The accuracies of each method were assessed via patterns in time series, coefficient of determination, root mean square error, and Willmott index of agreement. Results showed that globe thermometer method was more suitable for estimating Tmrt in summer than winter, and it showed better performance in more open spaces. The simulation inaccuracies were mainly reflected in winter. Comparatively, SOLWEIG exhibited the best performance in correlation and discrepancy; RayMan presented an advantage in describing the trend consistency of Tmrt than ENVI-met; ENVI-met simulated Tmrt closer to Tmrt(six) than RayMan. Principle-based causes of the techniques’ inaccuracies were analyzed. Correlation and cluster analyses were applied for the globe thermometer method, and global radiation showed the strongest correlation and nearest distance with globe temperature, followed by air temperature. Sensitivity and components analyses were utilized for the simulation models involving isotropic and anisotropic issues considering direct and diffuse radiation, solar position, and surrounding environment. Based on the characteristics of different techniques, multiple nonlinear (introducing equivalent globe temperature) and unary linear regressions were utilized to modify globe thermometer and simulation results, respectively. Both modifications significantly improved Tmrt determination accuracies.

Field study on thermal comfort in nursing homes in heated environments

Considering the progressive population aging, the fact that old people spend around 90% of their time indoors and the high energy expenditure of heating systems, thermal comfort in nursing homes should be analysed. The aim of this study is to analyse the thermal comfort during the winter of elderly people living in nursing homes (residents) and compare it with the thermal comfort of caregivers and therapists (non-residents). Longitudinal field measurements were conducted in 25 common rooms of five nursing homes in a Mediterranean climate during the winter, from January to March 2019. Room air temperature (Ta), relative humidity (HR%), mean radiant temperature (Tr) and air velocity (va) were recorded using a Delta Ohm HD32.1 instrument with an anemometer, thermometer and a black globe thermometer. “Right-here-right-now” thermal responses of occupants were collected using a face-to-face questionnaire delivered intermittently. A total of 881 questionnaires were collected and then matched against concurrent indoor and outdoor thermal conditions. The results indicate that residents of nursing homes in the Mediterranean climate were less sensitive to variations in room temperature than therapists and caregivers, and less sensitive than found in previous studies conducted in non-elderly adults. The neutral temperature for residents was 21.6 °C while for caregivers and therapists it was 21.9 °C. The results also showed that clothing adaptation to the activity of caregivers would increase their thermal comfort and might help thermal adaptation to residents’ thermal needs. The modification of temperature setpoints in nursing homes based on the results of this study could influence energy use and should be carefully considered by policy makers and nursing homes’ facility managers.

A Pilot Observational Study Comparing Wet Bulb Globe Temperature (WBGT) Parameter Measurements Between Three Commercial Kitchen Configurations

Line cooks in commercial restaurants work intense, high-stress shifts during near sources of heat, rendering them vulnerable to heat stress and occupational injury. However, there is a dearth of literature on heat stress among this population. This study investigated three common commercial kitchen configurations—zone, island, and assembly—to determine which design experiences the highest temperatures and if temperatures were in excess of recommended levels. A total of 11 restaurants were sampled for temperature using a Wet Bulb Globe Thermometer (WBGT). Descriptive statistics indicated that, on average, zone configurations are hotter than other kitchens and could pose a risk of heat stress; however, a Kruskal-Wallis test of significance revealed that this distinction was not statistically significant. Two measurements for zone kitchens were borderline significant, suggesting that future studies with greater statistical power would find significant differences between the kitchen types and further illuminate the risk of heat stress.

Impact of Window to Wall Ratio on Energy Loads in Hot Regions: A Study of Building Energy Performance

The concern regarding local responsive building design has gained more attention globally as of late. This is due to the issue of the rapid increase in energy consumption in buildings for the purpose of heating and cooling. This has become a crucial issue in educational buildings and especially in schools. The major issue in school buildings in Saudi Arabia is that they are a form of prototype school building design (PSBD). As a result, if there is any concern in the design stage and in relation to the selection of building materials, this will spread throughout the region. In addition to that, the design is repeated regardless of the climate variation within the kingdom of Saudi Arabia. This research will focus on the influence of the window to wall ratio on the energy load in various orientations and different climatic regions. The research will use the energy computer tool TAS Environmental Design Solution Limited (EDSL) to calculate the energy load as well as solar gain. During the visit to the sample schools, a globe thermometer will be used to monitor the globe temperature in the classrooms. This research introduces a framework to assist architects and engineers in selecting the proper window to wall ratio (WWR) in each direction within the same building based on adequate natural light with a minimum reliance on energy load. For ultimate WWR for energy performance and daylight, the WWR should range from 20% to 30%, depending on orientation, in order to provide the optimal daylight factor combined with building energy efficiency. This ratio can be slightly greater in higher altitude locations.

On the measurement of the mean radiant temperature by means of globes: An experimental investigation under black enclosure conditions

Mean radiant temperature is one of the four physical quantities required for the objective assessment of thermal environments. Due to its simplicity and relatively good accuracy, the most common measurement method is the black globe thermometer. Most studies have investigated the effects of diameter on the response time, of globe materials on its accuracy and the heat transfer modelling. Unfortunately, results seem to be inconsistent due to the difficulty of calibrating and metrologically characterizing globe thermometers under uniform black enclosure conditions. Besides, few studies have been focused on the accuracy of small globes that could result in a wrong assessment of the thermal environment. To answer to these open issues, this study will be focused on a metrological analysis of a wide sample of globes (metallic-made and plastic-made with different diameters) carried out in a testing apparatus specifically designed to reproduce a black uniform enclosure whose temperature can be strictly controlled. Obtained results revealed high errors of the mean radiant temperature measurement by tennis-table globes (up to 6 °C) which require a specific reformulation of convective heat transfer modelling, and lower response time (3–4 min) of table-tennis globes if compared with large ones (6–9 min).

Day and Night Thermal Mass Performance Studies on Wetland Settlement in Palembang

The phenomenon of urban heat island was affected by the thermal mass of the area. The massive development of settlement in the wetland of Palembang had changed the natural thermal mass composition. This paper discussed the effect of the settlement development in the urban thermal environment of the wetland of Palembang. We measured the effect of building, pavement, water body and vegetation factors in the day and night air temperature of the settlement area. Direct field measurement was done using the wet and dry thermometer, anemometer and globe thermometer for 3x24 hours. The result showed that there were differences in day and night air temperature in the area with different thermal mass composition. It was also affected by wind direction and weather conditions. We concluded that the day and night temperature balance of the area could be control by the composition of thermal mass in the settlement area.

Thermal-irradiant performance of green infrastructure typologies: Field measurement study in a subtropical climate city

Greenery infrastructure (GI) is an important design strategy for sustainable cities and communities' development, as it brings multiple benefits including mitigating urban heat island. Based on the implementation locations, three typical GI typologies, namely green roof, green wall, and ground tree, are widely adopted in urban communities. As previous studies focused on one single GI and mainly studied their thermal features, this study aims to fill the gap by investigating three GI typologies within one site; their thermal-irradiant performance was compared for four typical summer days in a subtropical city. Firstly, stationary and transect measurements were taken for six points (three greenery and three bare points); two typical measuring methods, i.e., the globe thermometer and the six-directional methods, were employed to collect irradiant variables. Secondly, the thermal-irradiant differences were revealed among GI typologies and temporal periods; two measuring methods were compared for their capabilities in detecting the irradiant variations near three GI typologies. Results showed that: 1) the ground tree experienced the smallest thermal-irradiant average and variation among three GI typologies; 2) the morning session (09:00–12:00) had the largest thermal-irradiant reduction and variations for three GI typologies; and 3) the six-directional method showed higher sensitivity towards the irradiant variations near three GI typologies; the globe thermometer method is not suitable for tree-shaded areas. This study provides a comprehensive understanding of proper selection of MRT measuring methods and GI implementation for thermal comfort, especially for the subtropical cities. Practically, this study shows designers and policymakers on how to implement GI typologies for climate-resilient design.