Global Carbon Footprint Research Articles

Does the Use of the Yeast Probiotic Saccharomyces cerevisiae Actisaf Sc 47 Reduce the Environmental Impacts of Beef Cattle? A Study Based on Life Cycle Assessment.

Increasing animal protein, especially from beef, is necessary to satisfy the requirements of the growing global population. However, this is becoming increasingly challenging due to stakeholders prioritizing sustainable systems with low environmental impacts. To answer these challenges, the use of feed additives such as yeast probiotics seems to be an effective route for improvements in feed efficiency and growth performance. The current study was performed to quantify the environmental impacts of the production and use of a yeast probiotic (Actisaf® Sc 47) through an LCA method in four trials performed during the fattening period: France (French trial), Spain (Spanish trial), and Italy (Italian trials A and B). During each trial, two groups of animals with the same characteristics were compared during the fattening period: the control group without Actisaf® Sc 47 supplementation used as a baseline, and the experimental group with Actisaf® Sc 47 supplementation. The calves started the trial at the ages of 224, 92, and 186 days during the French, Spanish, and Italian trials A and B, respectively. Of the sixteen impact category indicators, nine were analyzed. In Italian trials A and B, the Spanish trial, and the French trial, the use of Actisaf® Sc 47 reduced CC by 4.8, 3.8, 6.6, and 5.4%; FE by 4.8, 3.9, 8.2, and 6.3%; ME by 4.9, 4.0, 6, and 6.4%; and TE by 5.3, 4.1, and 6.2%, respectively. Moreover, during the same trials, Actisaf® Sc 47 reduced AC by 6.0, 4.1, 6.3, and 7.1%; LU by 4.7, 3.9, 5.8, and 6.1%; WU by 4.5, 3.4, 5.2, and 5.9%; RU (fossils) by 4.8, 3.7, 7.3, and 4.8%; and PM by 5.2, 4.1, 6.3, and 7.1%, respectively. The use of Actisaf® Sc 47 has beneficial effects on the environment. Regarding Actisaf® Sc 47 production, the results showed that the production of 1 kg of Actisaf® Sc 47 emitted 2.1 kg of CO2 eq, 60% of which came from the fermentation process and 39% from drying. The results demonstrate the interest in using Actisaf® Sc during the fattening period for its multiple positive outcomes: improving performance and efficiency, while reducing the global carbon footprint.

Kinetics of Hydrolytic Depolymerization of Textile Waste Containing Polyester

Textile products comprise approximately 10% of the total global carbon footprint. Standard practice is to discard apparel textile waste after use, which pollutes the environment. There are professional collectors, charity organizations, and municipalities that collect used apparel and either resell or donate them. Non-reusable apparel is partially recycled, mainly through incineration or processed as solid waste during landfilling. More than 60 million tons of textiles are burnt or disposed of in landfills annually. The main aim of this paper is to model the heterogeneous kinetics of hydrolysis of multicomponent textile waste containing polyester (polyethylene terephthalate (PET) fibers), by using water without special catalytic agents or hazardous and costly chemicals. This study aims to contribute to the use of closed-loop technology in this field, which will reduce the associated negative environmental impact. The polyester part of waste is depolymerized into primary materials, namely monomers and intermediates. Reaction kinetic models are developed for two mechanisms: (i) the surface reaction rate controlling the hydrolysis and (ii) the penetrant in terms of the solid phase rate controlling the hydrolysis. A suitable kinetic model for mono- and multicomponent fibrous blends hydrolyzed in neutral and acidic conditions is chosen by using a regression approach. This approach can also be useful for the separation of cotton/polyester or wool/polyester blends in textile waste using the acid hydrolysis reaction, as well as the application of high pressure and the neutral hydrolysis of polyester to recover primary monomeric constituents.

Simulation of policies to promote pro‐environmental behavior in a dynamic learning model of social networks: Cases of Brazil, the United States, Japan, Germany, China, and India

AbstractPro‐environmental behavior does not seem to diffuse sufficiently in Brazil, China, Germany, Japan, India, or the United States. Based on the current distribution of carbon footprints and learning patterns (DeGroot learning, best practice, and free riding) in social networks in the six countries, what will happen to the diffusion of pro‐environmental behaviors in each country? What policy measures will be most effective? This study aims to simulate the diffusion of pro‐environmental behavior and to test the effectiveness of various policy measures in a dynamic social network model in the six countries. The distribution of pro‐environmental behaviors is generated by global gridded carbon footprint data. The distribution of learning patterns in social networks is estimated in each country, using data from the World Values Survey. This study considers three policy measures: increasing the number of people pursuing best pro‐environmental behavior practices (best practice promotion, [BPP]), decreasing the number of free riders (free‐riding reduction, [FRR]), and converting the learning patterns of people with high degrees of centrality into best practice (centrality‐based best practice promotion, [CBPP]). Interesting findings were threefold. First, there are large differences in the estimated degrees of individual pro‐environmental behavior and the proportions of learning patterns in the six countries. Second, FRR and BPP are effective in promoting pro‐environmental behavior, but the choice of FRR or BPP depends on the initial proportion of free riders. Third, CBPP is the most effective policy of the three in all countries. Centrality in social networks must be considered when implementing intervention.

Mechanical property enhancement of flax fibers via supercritical fluid treatment

The desire for lightweight, carbon-negative materials has been increasing in recent years, particularly as the transportation sector reduces its global carbon footprint. Natural fibers, such as flax fiber and their composites, offer a compelling combination of properties including low density, high specific strength, and carbon negativity. However, because of the low modulus and high variability in performance, natural fibers can’t compete with glass fibers as structural reinforcements in polymer composites. In this study, flax technical fibers were treated in supercritical CO2 (scCO2), and the effects of this treatment on the morphology and properties of flax fibers are reported. Treatment in scCO2 successfully resulted in higher fiber modulus and strength by 33% and 40%, respectively. Fiber porosity was reduced by 50% and morphological changes to the fibers were observed. Specifically, fiber lumen collapsed during treatment and micro/mesoporosity was reduced by 27%. Treated flax fibers were used to create 30 vol% unidirectional flax-epoxy composites. ScCO2 treatment raised composite modulus and strength by 33% and 25%, respectively. Because of the dependence between technical fiber size and mechanical properties, the relationship between fiber modulus and fiber size were created and applied to the rule-of-mixtures. This relationship were found to be viable representations of the fiber performance within each composite. Overall, the treatment developed in this study has the potential to significantly improve natural fiber properties, enabling their consideration for use in lightweight, semi-structural composites.

Embodied carbon saving potential of using recycled materials as cement substitute in Singapore’s buildings

Material production and construction activities are key contributors to global carbon footprints, necessitating sustainable alternatives. This study aims to investigate the potential of integrating recycled materials as Supplementary Cementitious Materials (SCMs) in concrete production to mitigate the substantial carbon emissions of Singapore’s building and construction sector. The research focuses on Ground Granulated Blast-furnace Slag (GGBFS), waste glass powder, and calcined marine clay as alternative SCMs, aiming to reduce environmental impact and waste disposal emissions in Singapore. Employing a cradle-to-gate Life Cycle Assessment (LCA) methodology for 1 m3 of concrete with different grades, this study quantifies embodied carbon savings and assesses the feasibility of substituting these SCMs in concrete. The results reveal that substituting Ordinary Portland Cement (OPC) with GGBFS in concrete offers the most significant reduction, up to 56%, in 1 m3 of concrete. In contrast, the use of calcined marine clay and glass powder in concrete results in reductions of up to 21% and 16%, respectively. Two case studies were used to exemplify the impact of using SCM concrete at the project scale. Results indicate that up to 31% of the total embodied carbon could be saved in the building. Additionally, scenario analysis suggests that the total emissions from cementitious materials in Singapore could decrease by 20% through the incorporation of locally recycled marine clay and glass powder. This reduction could potentially reach 56% if the GGBFS supply is not constrained. To further enhance sustainability in Singapore’s construction sector, the study proposes sourcing GGBFS from neighboring countries to minimize transportation emissions and localizing the production and usage of calcined marine clay and glass powder. These measures can improve material circularity and significantly contribute to achieving carbon reduction targets.

Quantification of the Environmental Impact of Feeding Yeast Probiotic Saccharomyces cerevisiae Actisaf Sc 47 in Dairy Cow: A Life Cycle Assessment Approach.

Today, one of the major challenges of dairy farmers is to reduce their environmental footprint to establish more effective, efficient, and sustainable production systems. Feed additives such as yeast probiotics could potentially allow them to achieve these objectives through the improvement of milk production, feed efficiency, and ration valorization, hence mitigating the environmental impacts of milk production. In this study, the life cycle assessment (LCA) principle was performed to estimate the environmental impact of the production and supplementation of a commercial yeast probiotic (Actisaf Sc 47) in three trials performed in three different countries that are representative for around 50% of the milk production in Europe: France (French trial), United Kingdom (UK trial), and Germany (German trial). For each trial, two groups of animals were compared: control, without Actisaf Sc 47 supplementation, used as baseline; and experimental, with Actisaf Sc 47 supplementation at 5 or 10 g/cow/day. Different impact categories were analyzed for each group to calculate the impact of producing 1 kg of fat- and protein-corrected milk. An initial analysis was done only during the period of Actisaf Sc 47 supplementation and showed than the supplementation with Actisaf Sc 47 reduced, on average by 5%, the carbon footprint during the three trials. A second analysis was done via the extrapolation of all the data of each trial to an annual farm level, including the lactation period (305 days), dry period (60 days), and the period with and without Actisaf Sc 47 supplementation. Reported at a farm annual scale, the average reduction allowed by Actisaf Sc 47 supplementation was 2.9, 2.05, 2.47, 1.67, 2.28, 2.18, 2.14, and 2.28% of the carbon footprint, land use, water use, resource use, acidification, freshwater eutrophication, marine eutrophication, and terrestrial eutrophication, respectively. On average, the production of 1 kg of fat- and protein-corrected milk by using Actisaf Sc 47 was shown to improve environmental impacts compared to control. Regarding Actisaf Sc 47 production, the LCA showed that the production of 1 kg of Actisaf Sc 47 emitted 2.1 kg CO2 eq with a negligible contribution to total the carbon footprint of milk ranging from 0.005 to 0.016%. The use of Actisaf Sc 47 in dairy cows could then result in different positive outcomes: improving performance and efficiency while reducing the global carbon footprint.

Making minimally invasive procedures more sustainable: A systematic review comparing the environmental footprint of single-use versus multi-use instruments.

Healthcare systems contribute 5%-10% of the global carbon footprint. Given the detrimental impact of climate change on population health, health systems must seek to address this environmental responsibility. This is especially relevant in the modern era of minimally invasive procedures (MIP) where single-use instruments are increasingly popular. We compared the environmental footprint of single-use versus multi-use instruments in MIP. We conducted a systematic review across five databases to identify relevant original studies, following the PRISMA guidelines. We extracted environmental impact data and performed a quality assessment of included studies. We included 13 studies published between 2005 and 2024. Eight employed Life Cycle Analysis (LCAs), which is the gold standard methodology for studies evaluating environmental impact. The instruments studied included laparoscopy systems, endoscopes, cystoscopes, bronchoscopes, duodenoscopes, and ureteroscopes. Six studies, including three high quality LCAs and one fair quality LCA, showed that single-use instruments have a significantly higher environmental footprint than their multi-use counterparts. Six studies suggested a lower environmental footprint for single-use instruments, and one study presented comparable results. However, these studies were of poor/fair quality. Although our systematic review yielded mixed results, all high quality LCAs suggested multi-use instruments may be more environmentally friendly than their single-use counterparts. Our findings are limited by inter-study heterogeneity and methodological quality. There is an urgent need for additional research employing gold standard methodologies to explore the interplay between environmental impact and operational factors such as workflow efficiency and cost-benefit ratio to allow health systems to make more informed decisions.

Understanding Carbon Footprint in Sustainable Land-Based Marine Aquaculture: Exploring Production Techniques

In aquaculture, it is crucial to understand and mitigate the carbon footprint for sustainable production. As demand for seafood increases, various production techniques compete for an eco-friendly status. This review examines the carbon footprint of various land-based marine aquaculture systems, highlighting their environmental impact. Through exploring innovations and best practices, it navigates the complexities of reducing emissions and promoting carbon sequestration. Some proposals for this purpose are based on diversification through low-trophic-level species, the preservation of high-carbon sequestration sites, polyculture, organic aquaculture and improvements in nutrition, feeding, waste and energy management. In this sense, some land-based aquaculture systems are progressively adapting and updating their zootechnical procedures. Recirculating Aquaculture Systems (RASs) offer interesting advantages such as water conservation, pollution reduction and biosecurity. Integrated Multi-Trophic Aquaculture systems (IMTAs) aim to address two major issues in aquaculture: efficient water usage and the environmental impact of effluents, which are rich in organic particles and dissolved nutrients from undigested food and feces; hence, these systems involve cultivating multiple species (polyculture). Biofloc Technology (BFT) is based on the formation of bioflocs in a culture medium. These systems can enhance feeding efficiency and waste management, thus optimizing nutrient utilization and minimizing environmental impact, achieved through reduced water and fertilizer usage. Traditional (extensive) aquaculture systems operate with minimal input of feed and chemicals, relying heavily on the natural productivity of the ecosystems; thus, the need for manufactured feed, the environmental impact associated with feed production and the transportation and overall costs are significantly reduced. Overall, while RASs, BFT and extensive systems in general offer significant sustainability benefits, IMTA’s holistic approach to ecosystem management and nutrient recycling makes it, in our estimation, the most effective method in terms of ecological footprint in aquaculture. However, its quantitative evaluation is extremely complex, and there is currently a lack of references about its global carbon footprint. Therefore, further research and development are required, as well as collaboration and knowledge-sharing among stakeholders.

Green light or black flag? Greenwashing environmental sustainability in Formula One and Formula E

ABSTRACT Historically, Formula One motor racing has had a deleterious environmental impact: burning fossil fuels, the wanton waste of resources while producing a complex global carbon footprint. However, as global concerns and expectations have escalated around environmental sustainability, Formula One has advanced what is largely superficial and deceitful ‘green' credentials via perfunctory hybrid technologies and promulgating piecemeal sustainability strategies. In doing so, Formula One harnessed the considerable symbolic power of its global brand to popularise a largely superficial approach to sustainability, while focusing on its own global expansion and growth. Formula E is similarly premised on purportedly more sustainable ‘green' technologies. Nonetheless, the sport’s environmental credentials are also contestable, due to its constitutive partnerships with high—tariff environmental polluters, as well as the efficiency of the electric and battery technologies that it promotes. Via greenwashing rhetoric and practices, this article explores the symbolic power both sports espouse through notions of sustainability.

Consequences of increasing greenhouse gas emissions: case study on the impact of the food industry

The global carbon footprint has increased to frightening heights due to rising greenhouse gas emissions, mainly from the energy and industrial sectors, which include the food industry. This case study examines how the industry's carbon emissions have changed over time, highlighting the sector's major environmental impact and the pressing need to implement decarbonization plans. The particularity of the study lies in the analysis of the crucial role that emissions from the food industry play in global emissions. An overview of the global industrial carbon footprint was created through an analysis of carbon emissions data from multiple sources, with a particular focus on the food industry. Since the Industrial Revolution, carbon dioxide emissions have increased dramatically worldwide, reaching a record high of 36.3 billion tons in 2019. With around 23% of global emissions coming from industry, the energy sector is the largest emitter. The main cause of emissions is the use of fossil fuels in heavy industries such as steelmaking, cement, and chemicals; the two largest emitters are China and the United States. Achieving the goals outlined in the Paris Agreement and halting climate change requires reducing carbon emissions from the food industry. The adoption of low-carbon technologies, increased energy efficiency and a shift to cleaner energy sources are essential remedies. The industrial sector needs to decarbonize faster, and this can only be achieved through international cooperation and strong government regulations.

Sustainable energy efficient workflow classification and scheduling in geo distributed cloud datacenter

Data centers are a major source of carbon emissions and are subsequently contributing to global carbon footprints. Keeping in view of providing a sustainable solution to society, we have analyzed various factors that can help to achieve carbon neutrality and maximum sustainability. Our study pointed towards the need to follow a sustainable approach for incoming workflow throughout the life-cycle of Data centers. We analyzed that workloads need to be segregated before assigning them to the data centers so that energy-efficient resource allocation could be done. This paper demonstrates unsupervised learning techniques to cluster the incoming cloud workloads. The heterogeneous workloads were characterized using machine learning approaches and appropriate clusters were crafted. For analysis, Google Cluster Dataset is used. In order to improve the accuracy, data were normalized, and random samples of data were selected for clustering. The machine learning algorithms applied were able to successfully determine the appropriate clusters that can further be used for energy-efficient resource scheduling.

Contribution of hospital pharmacists to sustainable healthcare: a systematic review

BackgroundWith a global annual carbon footprint of the healthcare sector of 2 gigatons of CO2e, healthcare systems must contribute to the fight against climate change. Hospital pharmacists could be key...

The carbon footprint of as-needed budesonide/formoterol in mild asthma: a post hoc analysis.

The use of pressurised metered-dose inhalers (pMDIs) and asthma exacerbations necessitating healthcare reviews contribute substantially to the global carbon footprint of healthcare. It is possible that a reduction in carbon footprint could be achieved by switching patients with mild asthma from salbutamol pMDI reliever-based therapy to inhaled corticosteroid-formoterol dry powder inhaler (DPI) reliever therapy, as recommended by the Global Initiative for Asthma. This post hoc analysis included all 668 adult participants in the Novel START trial, who were randomised 1:1:1 to treatment with as-needed budesonide/formoterol DPI, as-needed salbutamol pMDI or maintenance budesonide DPI plus as-needed salbutamol pMDI. The primary outcome was carbon footprint of asthma management, expressed as kilograms of carbon dioxide equivalent emissions (kgCO2e) per person-year. Secondary outcomes explored the effect of baseline symptom control and adherence (maintenance budesonide DPI arm only) on carbon footprint. As-needed budesonide/formoterol DPI was associated with 95.8% and 93.6% lower carbon footprint compared with as-needed salbutamol pMDI (least-squares mean 1.1 versus 26.2 kgCO2e; difference -25.0, 95% CI -29.7 to -20.4; p<0.001) and maintenance budesonide DPI plus as-needed salbutamol pMDI (least-squares mean 1.1 versus 17.3 kgCO2e; difference -16.2, 95% CI -20.9 to -11.6; p<0.001), respectively. There was no statistically significant evidence that treatment differences in carbon footprint depended on baseline symptom control or adherence in the maintenance budesonide DPI arm. The as-needed budesonide/formoterol DPI treatment option was associated with a markedly lower carbon footprint than as-needed salbutamol pMDI and maintenance budesonide DPI plus as-needed salbutamol pMDI.

Think global act local: The dependency of global lithium-ion battery emissions on production location and material sources

The pursuit of low-carbon transport has significantly increased demand for lithium-ion batteries. However, the rapid increase in battery manufacturing, without adequate consideration of the carbon emissions associated with their production and material demands, poses the threat of shifting the bulk of emissions upstream. In this article, a life cycle assessment (LCA) model is developed to account for the cradle-to-gate carbon footprint of lithium-ion batteries across 26 Chinese provinces, 20 North American locations and 19 countries in Europe and Asia. Analysis of published LCA data reveals significant uncertainty associated with the carbon emissions of key battery materials; their overall contribution to the carbon footprint of a LIB varies by a factor of ca. 4 depending on production route and source. The links between production location and the gate-to-gate carbon footprint of battery manufacturing are explored, with predicted median values ranging between 0.1 and 69.5 kg CO2-eq kWh−1. Leading western-world battery manufacturing locations in the US and Europe, such as Kentucky and Poland are found to have comparable carbon emissions to Chinese rivals, even exceeding the carbon emissions of battery manufacturing in several Chinese provinces. Such resolution on material and energy contributions to the carbon footprint of LIBs is essential to inform policy- and decision-making to minimise the carbon emissions of the battery value chain. Given the current status quo, the global carbon footprint of the lithium-ion battery industry is projected to reach up to 1.0 Gt CO2-eq per year within the next decade. With material supply chain decarbonisation and energy savings in battery manufacturing, a lower estimate of 0.5 Gt CO2-eq per year is possible.

The structural change and determinants of global carbon footprint network embodied in international migration: A social network analysis

The carbon footprint embodied in international population mobility has a complex spatial correlation, which exacerbates the difficulty of global climate governance. However, the features, changing trends, and determinants of the carbon footprint flow embodied in global population migration are poorly understood. This study employed social network analysis and the exponential random graph model (ERGM) to investigate the structural changes and drivers of the carbon footprint network embodied in global migration from 1995 to 2015. The results showed that approximately 50% of carbon footprint flow embodied in international migration flowed from developing to developed countries. The spatial connections between countries in the network were becoming increasingly close, displaying a typical small-world structure, and showing low reciprocity and negative assortativity. Moreover, centrality analysis highlighted the United States and the European Union as being at the core of the network, whereas some emerging economies (e.g., China, India, and South Africa) were shown as having an increasing influence on the network. The determinants of network formation were divided into three effects. For node attribute effect, countries with developed economy, high proportion of industrial value added, urbanization and openness were becoming the destinations of carbon inflows from immigrants, while countries with high consumption of renewable energy and energy intensity had a trend of carbon outflows with emigrants over periods. As for exogenous network effect, the significance of economic integration on the formation of the network was strengthening, while that of geographical proximity and cultural similarity was declining. Additionally, the positive impact of self-organizational effect on the network was decreasing. This study provided guidance for countries to formulate policies to reduce the carbon emissions embodied in international migration.

SUGARCANE BAGASSE ASH AS A PARTIAL REPLACEMENT OF CEMENT FOR PRODUCING COMPRESSED STABILIZED EARTH BLOCKS

The masonry blocks traditionally used in construction are associated with high energy consumption and significant emissions generation, placing a significant burden on the Earth's resources and alarming global warming and carbon footprint. For this reason, compressed stabilized earth blocks represent a satisfactory, lower-impact alternative to improve the physical and mechanical behavior of the soil mix. To achieve this, compressed stabilized soil blocks were developed using locally available sandy silt-type soil. This soil was stabilized using 12% GU-type cement and 3% sugarcane bagasse ash, a residue of the agro-industry with the highest production by weight in Ecuador, with a generation of 25 to 40 kg for each ton of bagasse incinerated. Blocks with dimensions of 13 cm x 6 cm x 5.5 cm were manufactured, compacted to optimum moisture content, and cured for 14 and 28 days. Finally, they were tested for compressive strength, flexural strength, and water absorption. The results obtained showed compliance with the requirements of various international standards.

Effects of Biodegradable Plastic Film Mulching on the Global Warming Potential, Carbon Footprint, and Economic Benefits of Garlic Production

This paper clarifies the farm applicability and feasibility of spreading biodegradable plastic film mulching for garlic production to ensure the green and sustainable development of the garlic industry. We set up a field trial of garlic planting with biodegradable plastic film mulching (BM) and plastic film mulching (PM), using no film mulching (CK) as the control, and measured CH4 and N2O emissions in the garlic fields. The yield-scaled global warming potential, carbon footprint, and net ecosystem economic benefit (NEEB) were used to assess the comprehensive impact of the different treatments. Compared to the CK, film mulching significantly increased CH4 absorption, with significantly higher seasonal cumulative CH4 emissions (20.5%) in BM than PM, but significantly increased N2O emissions, with significantly lower seasonal cumulative N2O emissions (23.53%) in BM than PM. Both BM and PM improved garlic yield, with PM significantly increasing garlic yield by 18.86% compared to the CK. Moreover, film mulching significantly decreased the yield-scaled global warming potential (by 52.06% and 40.82% in PM and BM, respectively). PM had a significantly higher carbon footprint than BM. Film mulching improved NEEB by 9.29–11.78%. Considering crop yields and environmental benefits, we propose BM as an effective method for a green and efficient garlic production.

Robust macroscale superlubricity on carbon-coated metallic surfaces

This paper discusses experimental and computational results of ultralow (near-zero) friction of carbon-coated metallic depositions on substrates of structural steels, Ti, and Ni alloys. The macroscale superlubricity was demonstrated and sustained over several cycles through structurally misoriented carbon coatings on the metallic surfaces. Carbon nanocrystals with variants of graphene footprints were deposited on these metallic surfaces using a novel high temperature biowaste treatment process. The carbon nanocrystals deform, flatten, and coalesce in the wear tracks to form graphitic films leading to a superlubricious coefficient of friction of ∼0.003. A coating life of ∼150,000 cycles with reduced wear rates was obtained on Ni and steel substrates. The experiments were validated with atomistic simulations providing mechanistic insights into the effects of the graphene variants on the observed frictionless conditions. The underlying mechanisms of the coating/substrate interactions contributing to the macroscale superlubricity are elucidated. The implications of the current results are explored for designing robust and low-cost macroscale superlubricious carbon coatings on metallic substrates. Biowaste is a carbon source within a circular economy that uses material recycling to reduce the global carbon footprint.

A port consolidation model for data center network infrastructure energy efficiency

Technological advancements have increased the energy consumption of data center network infrastructure causing an increase in global carbon footprints. Consolidation of hardware is considered to be one of the acceptable techniques for reducing energy consumption in data centers. However, consolidation of hardware may result in scarce fault tolerance which consequently leads to performance degradation. Therefore, a technique is required that performs consolidation while data center performance remains unaffected. In this work, a port consolidation model has been proposed. The proposed model diverts the traffic of the ports in a switch to other ports so that the number of active ports can be reduced. The reduction of active ports will result in the energy-efficient utilization of the switch. The proposed diverts the traffic by evaluating the Arrival Rate of packets and the Forwarding Rate of the switch. The proposed algorithm used in the model has been examined through a case study. The proposed model is implemented in integration with our previously proposed network refresh model.

Effect of superplasticizer in geopolymer and alkali-activated cement mortar/concrete: A review

Abstract The cement and construction industry creates around 10% of the global carbon footprint. Geopolymer and alkali-activated concrete provide a sustainable solution to conventional concrete. Due to its disadvantages, the practical usage of geopolymer and alkali-activated concrete is limited. Workability is one of the issues faced in developing geopolymer and alkali-activated concretes. Plenty of research was conducted to provide a solution to enhance the ability to use different superplasticizers (SPs). The present article extensively reviews the effects of SPs on geopolymer and alkali-activated concretes. The research articles published in the last 5 years in high-quality journals are considered for the chemical composition of the different SPs and analyses of their exact impact on geopolymer and alkali-activated cement mortar and concrete. Later, the impact of SPs on the normal consistency and setting times of cement mortar, workability, compressive strength, flexural strength, split tensile strength, microstructure, and water absorption of geopolymer and alkali-activated concrete was determined. SPs improve the geopolymer and alkali-activated concretes upon their use in desired dosages; more dosage leads to negative effects. Therefore, selecting the optimal superplasticizer is essential since it impacts the performance of the geopolymer and alkali-activated concrete.