Bioglasses (BG) are the inorganic materials exhibiting the highest indices of bioactivity. Their appliance as films for bio-functionalization of metallic implant surfaces has been regarded as an optimal solution for surpassing their limited bulk mechanical properties. This study reports on magnetron sputtering of alkali-free BG thin films by varying the target-to-substrate working distance, which proved to play an important role in determining the films’ properties. Post deposition heat-treatments at temperatures slightly above the glass transformation temperature were then applied to induce inter-diffusion processes at the BG/titanium substrate interface and strengthening the bonding as determined by pull-out adherence measurements. The morphological and structural features assessed by SEM–EDS, XRD, and FTIR revealed a good correlation between the formations of inter-metallic titanium silicide phases and the films’ bonding strength. The highest mean value of pull-out adherence (60.3±4.6MPa), which is adequate even for load-bearing biomedical applications, was recorded for films deposited at a working distance of 35mm followed by a heat-treatment at 750°C for 2h in air. The experimental findings are explained on the basis of structural, compositional and thermodynamic considerations.