Glass Fiber Reinforced Epoxy Hybrid Research Articles

Experimental evaluation on compression-after-impact behavior of perforated sandwich panel comprised of foam core and glass fiber reinforced epoxy hybrid facesheets

Abstract To study the impact response and compression-after-impact (CAI) behavior of perforated sandwich panels comprised of foam core and glass fiber-reinforced epoxy hybrid facesheets, the hole diameter of specimens is changed in the fabrication via vacuum-assisted resin infusion. Furthermore, low-velocity-impact tests with various impact distances between the impact point and hole are carried out. With the help of the digital image correlation technique, CAI testing is conducted, and the strain evolution of specimens is monitored carefully. The mechanical response history, damage morphology, and compressive process are discussed in detail. The results show that the impact and CAI performance of specimens are weakened because of open holes. Compared with the non-perforated specimen, the maximum force of the specimen with a 6-mm hole and the 5-mm impact distance decreases by 41.21%, and its maximum displacement increases by 38.60%. During the CAI process, in comparison with the impact damage, more significant stress concentration and buckling around the hole are found.

Synergistic Effect of Nano-α-Al2O3 Particles on Mechanical Properties of Glass-fibre reinforced Epoxy Hybrid Composites

Synergistic Effect of Nano-α-Al2O3 Particles on Mechanical Properties of Glass-fibre reinforced Epoxy Hybrid Composites

Development and testing of Pine Apple and Glass Fiber Reinforced Epoxy Hybrid Composites

Usage of Natural Fiber Composites (NFC) is increased rapidly due to the bio degradability nature of the fibers. These natural fibers are mixed with synthetic fibers to obtain better mechanical properties. In this study, pine apple and glass fiber reinforced epoxy composites are developed and their mechanical properties were evaluated. Composites were prepared by varying the fibers content and by using hand layup process with glass moulds of size 160 x 160 x 3 mm3. The obtained laminates were sliced as per the ASTM criterion to test the properties. Higher glass fiber content in the composite specimen obtained higher mechanical properties. The composites can be utilized for the purpose of manufacturing components like doors panels, desks, roof tops etc.

Effect of Technological Factors on some Properties of Composite tube with Epoxy Resin K-153 Matrix

The tube is made of polymer composite material based on K-153 epoxy resin (K-153 epoxy resin is made from ED-20 epoxy resin modified by thiokol and oligomer acrylate), T-13 glassfiber, hardener polyethylenepolyaminemade by wrapping on machine. The effect of drying temperature on mechanical properties (tensile strength, flexural strength) of polymercomposite materialwas studied. The paper also mentions to select suitable hardener to beused for polymercomposite tube wrapping. The results show that the strength at break, flexural strength of polymercomposite material are changedmuch when changing wrapping angle. The drying temperature increases, the curing time of polymercomposite material is much reduced. The time to stabilize after drying also greatly affects the pressure resistance of polymer composite tubes.
 Keywords
 Polymercomposite, K-153, tensile strength, flexural strength, pressure resistance.
 References
 [1] M. J. Mochane, T. C. Mokhena, T. H. Mokhothu, Recent progress on natural fiber hybrid composites foradvanced applications: A review, eXPRESS Polymer Letters 13 (2) (2019) 159-198.[2] J. Kim, H. J. Yoon, K. Shin, A study on crushing behaviors of composite circular tubes with different reinforcing fibers, International Journal of Impact Engineering 38(4) (2014) 198-207.[3] T. D. Jagannatha1, G. Harish, Mechanical Properties of carbon/ glass fiber reinforced epoxy hybrid polymer composites, Journal of Reinforced Plastics and Composites 4 (2) (2015) 131–137.[4] Vitalii Bezgin, Agata Dudek, Composites based on high-molecular weigh epoxy resin modified with polysulfide rubber, Composite Theory and practice 17(2) (2017) 79-83. [5] Abdouss, Majid, Farajpour, Tohid, Derakhshani, Morteza, The Effect of Epoxy-Polysulfide Copolymer Curing Methods on Mechanical-Dynamical and Morphological Properties, Iran. J. Chem. Chem. Eng. 30(4) (2011) 37-44.[6] G. Devendhar Rao, K. Srinivasa Reddy, P. Raghavendra Rao, Mechanical properties of E-glass fiber reinforced epoxy composites with SnO2 and PTFE, International Journal of Emerging Research in Management and Technology 6 (7) (2017) 208-214.[7] Hu Dayong, Jialiang Yang, Experimental study on crushing characteristics of brittle fibre/epoxy hybrid composite tubes, International Journal of Crashworthiness 15(4) (2010) 401-412 .[8] G.U. Raju, S. Kumarappa, Experimental Study on Mechanicaland Thermal Properties of Epoxy Composites Filled with Agricultural Residue, Polymers from Renewable Resources 3 (3) (2012) 118–138.
 
 
 
 

Fabrication and Mechanical Characterization of Glass fibre reinforced Epoxy Hybrid Composites using Fly ash/Nano clay/Zinc oxide as filler

In this work the characterization of the mechanical behaviour of glass fibre reinforced epoxy hybrid composites were carried out. With three types of fillers- Nano clay- Zinc oxide- fly ash at different weight ratios and combinations were dispersed with matrix material epoxy by ultra-sonication method. Epoxy glass composites with various fillers were fabricated by hand lay-up technique. Mechanical characterization of Glass fibre reinforced Epoxy Hybrid Composites using Fly ash/Nano clay/Zinc oxide as filler were carried out for tests for tensile, flexural and impact strength properties. Experimental analysis shows Nano clay/fly ash epoxy composites show comparatively higher tensile and impact strength. While Zinc oxide/fly ash epoxy glass composite exhibited better flexural strength. Hybrid filler material dispersed glass fibre reinforced composites can be used for structural application as properties it processes are higher as compared to plain glass fibre reinforced epoxy composites.

Micromechanical analysis of the elastic response of glass-epoxy hybrid composites containing silica nanoparticles

ABSTRACTThe effects of adding silica nanoparticles on the elastic properties of glass-epoxy hybrid composites are investigated using a micromechanical method. Influences of silica nanoparticle volume fraction and diameter, the interphase elastic modulus and thickness, the glass fiber volume fraction and aspect ratio as well as off-axis angle on the elastic properties of unidirectional glass fiber-reinforced epoxy hybrid composites containing silica nanoparticles are studied. The results reveal that the addition of silica nanoparticles can improve the elastic modulus in the transverse direction, while the axial elastic modulus is not affected by silica nanoparticles.

Moisture and filler induced effects on the dynamic mechanical properties of glass fiber reinforced epoxy hybrid composites

The paper reports the results of moisture and filler induced effects on the dynamic mechanical properties of glass fiber reinforced epoxy hybrid composites. The rate of water diffusion into the composites has been determined to understand the effect of moisture on the dynamic mechanical properties. Significant differences in the moisture uptake properties of the composites are observed which induce changes in storage modulus (E′), loss modulus (E″), and damping factor (tan δ). It is also observed that water diffusion depends on the free volume content of the hybrid composites. Results of this study indicate that hybrid composites with combination of micro and nanofillers possess good dynamic mechanical properties in presence of moisture at higher temperatures.

Damping characteristics of nanoclay filled hybrid laminates during medium velocity impact

The objective of this paper is to study the vibrational damping characteristics during medium velocity impact of nanoclay filled glass fiber reinforced epoxy hybrid laminates. A series of laminates with varying degree of nanoclay concentration (0–5 wt.%) and fiber weight fraction (25–75 wt.%) were prepared by vacuum assisted resin infusion molding (VARIM) method. The laminates were subjected to medium velocity projectile impact using in-house built gas gun set-up and the ballistic limit of laminates series was determined. The result indicated that during impact, the laminate undergoes vibrational damping. This damping property is a function of fiber weight fraction and orientation, nanoclay concentration and nanocomposite structure. A 42% increase of ballistic limit was observed for 5 wt.% nanoclay filled hybrid (50 wt.% fiber) when compared with unfilled composite. Structural and modal analysis of hybrids showed that the increased ballistic limit of nanoclay filled hybrids is due to the nanocomposite structure and improved damping and fracture properties.

Analysis of the mechanical and thermal properties of jute and glass fiber as reinforcement epoxy hybrid composites.

This work describes the study to investigate and compare the mechanical and thermal properties of raw jute and glass fiber reinforced epoxy hybrid composites. To improve the mechanical properties, jute fiber was hybridized with glass fiber. Epoxy resin, jute and glass fibers were laminated in three weight ratios (69/31/0, 68/25/7 and 64/18/19) respectively to form composites. The tensile, flexural, impact, density, thermal and water absorption tests were carried out using hybrid composite samples. This study shows that the addition of jute fiber and glass fiber in epoxy, increases the density, the impact energy, the tensile strength and the flexural strength, but decreases the loss mass in function of temperature and the water absorption. Morphological analysis was carried out to observe fracture behavior and fiber pull-out of the samples using scanning electron microscope.

Investigation of mechanical properties of luffa cylindrica fibre reinforced epoxy hybrid composite

In this present work, the effect of stacking sequence on mechanical properties of untreated luffa cylindrica and glass fibre reinforced epoxy hybrid composites has been investigated experimentally. Composite laminates were fabricated by hand lay-up technique. All the composites were made with a total of 4 plies, by varying the number and position of glass layers so as to obtain six different stacking sequences. One group of neat epoxy samples was also fabricated for comparison purpose. Samples were analysed for their mechanical and flexural properties to establish the effect of various stacking sequence. It is found that the optimum properties (tensile and flexural strength) are achieved from hybrid laminate (S5) i.e. by placing two luffa cylindrica fibre mats at the middle when supported by two glass fibre mats on either side.Keywords: Luffa cylindrica-glass hybrid, Tensile strength, Flexural strength, ILSS, SEM