Abstract
In this present work, the effect of stacking sequence on mechanical properties of untreated luffa cylindrica and glass fibre reinforced epoxy hybrid composites has been investigated experimentally. Composite laminates were fabricated by hand lay-up technique. All the composites were made with a total of 4 plies, by varying the number and position of glass layers so as to obtain six different stacking sequences. One group of neat epoxy samples was also fabricated for comparison purpose. Samples were analysed for their mechanical and flexural properties to establish the effect of various stacking sequence. It is found that the optimum properties (tensile and flexural strength) are achieved from hybrid laminate (S5) i.e. by placing two luffa cylindrica fibre mats at the middle when supported by two glass fibre mats on either side.Keywords: Luffa cylindrica-glass hybrid, Tensile strength, Flexural strength, ILSS, SEM
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: International Journal of Engineering, Science and Technology
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
