Research of pigment chromic oxide addition influence on properties of alumina-chromia-zirconium silicate refractories simples with a mass part 30 and 15 % Cr2O3 got by the semidry pressing method is carried out. It is set, that in samples made from batch with 30 % Cr2O3 optimal quantity of pigment chromic oxide, which provide achieving close properties indexes compared to indexes of samples without this component should be considered 10 %, and in samples made from batch with 15 % Cr2O3 — 6 %. The properties indexes of samples with 30 % Cr2O3 containing 10 % pigment chromic oxide are: mass part of Al2O3 — 62.7 %, Cr2O3 — 30.3 %, ZrO2 — 5.8 %, open porosity 22.6 %, apparent density 3.27 g/cm3, cold crushing strength 123 N/mm2, thermal shock resistance on the mode 950 оC — water 4 thermal cycles, residual changes of sizes at a temperature 1650 оC, exposition 2 hours 0 %. The properties indexes of samples with 15 % Cr2O3 containing 6 % pigment chromic oxide are: mass part of Al2O3 — 76.4 %, Cr2O3 — 15.2 %, ZrO2 — 6.1 %, open porosity 22.4 %, apparent density 3.17 g/cm3, cold crushing strength 145 N/mm2, thermal shock resistance on the mode 950 оC — water 4 thermal cycles, residual changes of sizes at a temperature 1650 оC, exposition 2 hours 0 %. Obtained results are used at making of products for glass melting furnace of industrial lining for fiberglass production from E glass.