Glacigenic Debris Flows Research Articles

Major tunnel valleys and sedimentation changes document extensive Early Pleistocene glaciations of the Barents Sea

Sedimentary records of Early Pleistocene (~2.6–0.8 Ma) glaciations are sparse on shelves, yet trough mouth fans on adjacent continental slopes provide a continuous record of ice-sheet and climate development throughout the Quaternary. Here, we interpret high-quality 3D seismic reflection data combined with borehole and chronostratigraphic information from a shelf-slope setting in the southwestern Barents Sea to study meltwater and sediment inputs to the deep ocean, focusing on the onset of Pleistocene glaciations. Sandy deposits were brought to the slopes of the high-latitude Bear Island Fan by a preglacial contourite-turbidite system from ⁓2.6–2.4 Ma. Muddy glacigenic debris flows document the first shelf-edge glaciation at ⁓2.4 Ma. From 1.78–0.78 Ma, muddy turbidity-current- and debris-flow-derived sediments were delivered from shelf to slope via six tunnel valleys measuring up to 12 km in width and 200 m in depth. These tunnel valleys and associated downslope deposits formed during the 41-kyr climate cycles of the Early Pleistocene, and evidence abundant channelized, meltwater discharges from these glaciations. Following the mid-Pleistocene transition to 100-kyr cycles, a change in the style of glaciation is suggested by a change in landform and facies associations consistent with a reduced meltwater contribution. This study shows that the Norwegian-Barents shelf was extensively glaciated in the Early Pleistocene, with a first shelf-edge glaciation from ~2.4 Ma.

The Quaternary sedimentary history and dynamics of the deep-water margin off the Hudson Strait ice stream

Sites of ice-stream discharge to the continental slope build trough-mouth fans from glacigenic debris flows (GDFs), subglacial meltwater flows, and suspended sediment. Thus, past ice configurations may be interpreted from the sedimentological record. This study links the records in cores, high-resolution seismic profiles, and multibeam swath bathymetry of Hatton Slope and Fan to the changing glaciological history in Hudson Strait, one of the largest ice streams of the late Pleistocene Laurentide Ice Sheet. 14C-AMS dates, X-ray fluorescence geochemical profiles, and oxygen isotopes in sixteen cores document sediment supply during the last glacial cycle, and earlier history is interpreted from seismic data. The Frobisher Bay slope sector has a long record of GDF deposits from severe glacial periods between MIS 6 and 22, with little impact of meltwater discharge. Mass-transport events and aggrading gravel-floored valleys dominate the northern Hatton slope sector. The central slope sector shows the greatest shelf break progradation by till deposition, with kilometre-spaced gullies heading at 700–730 mbsl from the last major grounding of the ice-stream on the upper slope during Heinrich event 3 (H3). The gullies pass downslope into ∼5 km wide valleys, which have been sites of sediment bypass since widespread meltwater flow in MIS 6 and show little aggradation since MIS 16. Intervening >50 m high ridges show alternating levee accretion and erosion by shallow mass-transport events. Downslope on Hatton Fan, GDFs are common and fill wide erosional channels that lead to the sandy braid plain of the central Labrador Sea. The channels of the southern sector and Saglek Slope have channeled turbidity currents down the NAMOC, and stratified contourite deposits accumulated on the fan. Over the MIS 1–3 period widely represented by cores, ice was grounded in Hatton Basin and on the upper slope to 700 m water depth only immediately prior to H3. Older and younger H events had a floating ice-shelf in Hatton Basin, and sedimentation was dominated by the retreat of that ice shelf to Resolution Island. Distal cores show no systematic difference between the H1–top H3 interval and the base H3–H5 interval. Given the supply of carbonate detritus of consistent composition back to at least H5, any MIS 3 deglaciation of Hudson Bay would require improbably high growth rates of ice sheets in the centre of the continent.

Three-dimensional architecture and evolution of Quaternary contourite drifts on the Vøring Plateau, Norwegian Sea

We use newly available, extensive two- and three-dimensional seismic datasets in the Vøring Plateau sector of the mid-Norwegan continental margin to investigate the architecture and evolution of Quaternary contourite drifts in the Norwegian Sea. The drifts typically comprise tens of cubic kilometres of sediment, often intercalated between lenses of glacigenic debris flows, and demonstrate migrating depositional centres along the upper and middle slope sectors of the mid-Norwegian margin through the last ~2.7 M.yr. By contrast, the contourite deposited in the southern Vøring Plateau area is anomalously large covering an area of ~17,000 km2 and comprising over 720 km3 of sediment. Correlation of internal drift surfaces with well-dated sediment cores shows that the massive, up to 280 m thick drift contains two major units that were deposited over the last two glacial-interglacial cycles, yielding extremely high sedimentation rates, comparable to those sourced directly from erosive meltwater-rich glaciers and fast-flowing ice streams. A revised evolutionary drift model provides an end-member example of how a combination of rapid glacially-derived sediment delivery and its subsequent transport and deposition by along-slope processes may exert considerable influence on continental margin morphology over geologically short timescales.

Deep-water sedimentation processes on a glaciated margin: The Foula Wedge trough mouth fan, West of Shetland

Trough Mouth Fans (TMF) are sedimentary depocenters located at glaciated continental margins and consist predominantly of glacigenic debris flow deposits. The Foula wedge is a Pleistocene TMF accumulated offshore West of Shetland over the Northeast Atlantic margin. This study presents an analysis of a 3D seismic reflection dataset imaging the distal Foula wedge basin fan deposits between 1010 and 1100 m water depth, directly downslope from a gully system which was active untill the end of the last deglaciation. Results reveal, in unprecedented detail, the basal surface of this fan system and its internal complex architecture. Features typical of both debris flow deposits and turbidites are identified, including a basin channel network with linear and diverging erosional features forming distinctive terminal lobes, stacked and backstepping. The study links the seafloor morphology of the basin fan with its subsurface geomorphology, showing connection with the downslope gully system to the east. It presents evidence for a complex distal depositional system on glaciated margins, characterised by heterogeneous sediment delivery processes and deposits. A conceptual evolution model is proposed, with a glacigenic debris flow-dominated TMF at the LGM, subsequently influenced by meltwater discharges, with deposition occurring as a function of the shelf margin and slope paleo-morphology, slope substrate composition, interaction of downslope and along slope processes and ice-margin dynamics.

An updated Weichselian chronostratigraphic framework of the Kongsfjorden Trough Mouth Fan and its implications for the glacial history of Svalbard

The Arctic is a climate‐sensitive area, responding rapidly to present changes, but for the past changes, the record is still incomplete. For instance, the Weichselian glacial history of the Svalbard–Barents Sea Ice Sheet (SBIS) has largely been reconstructed based on studies of the fragmentary Spitsbergen terrestrial and shelf records. However, the sediments removed from the land and shelf areas during peak glacials were deposited on trough mouth fans located along the continental slope. By studying the stratigraphy and processes of the trough mouth fans, comprising a more complete sediment archive, our new data have allowed gaps in the Weichselian glacial history of the SBIS to be refined and filled. Here we present new lithological and geochronological data from the Kongsfjorden Trough Mouth Fan, closely linked to the advance and decay of the SBIS. High‐resolution TOPAS seismic profiles reveal three distinct packages of glacigenic debris flows (GDFs) within its upper stratigraphy, each interpreted to represent an advance of the SBIS to the shelf edge. A radiocarbon dated, 12.6‐m‐long core from the southern flank of the Kongsfjorden Trough Mouth Fan penetrates trough sediments directly linked to the youngest GDF package and terminates in the second GDF, allowing us to study the last two Kongsfjorden ice‐stream advances in greater detail than was previously possible. The age model of core GS10‐164‐09PC, based on combining 14C‐, 18O‐stable isotope and magnetic susceptibility data, spans the last ~54 ka. An Early Weichselian glacial advance is tentatively dated to have ended at ~90 ka. A second peak glaciation is estimated at ~70 ka, followed by a deglaciation from ~54 ka. An ice rafted debris‐rich unit (U7) dated between 38 and 34 ka, followed by a plumite (U6), indicates an advance of unknown extent. The Last Glacial Maximum advance is dated to before 24 ka BP, followed by a rapid deglaciation at ~15 ka. The presence of coarser‐grained sorted sediments at the present seafloor is attributed to the influence of the West‐Spitsbergen Current, acting on water depths of at least 846 m, and is thought to have worked in the vicinity of the coring site since ~14 ka BP.

Pleistocene depositional environments and links to cryosphere-ocean interactions on the eastern Ross Sea continental slope, Antarctica (IODP Hole U1525A)

The repeated proximity of West Antarctic Ice Sheet (WAIS) ice to the eastern Ross Sea continental shelf break during past ice age cycles has been inferred to directly influence sedimentary processes occurring on the continental slope, such as turbidity current and debris flow activity; thus, the records of these processes can be used to study the past history of the WAIS. Ross Sea slope sediments may additionally provide an archive on the history and interplay of density-driven or geostrophic oceanic bottom currents with ice-sheet-driven depositional mechanisms. We investigate the upper 121 m of Hole U1525A, collected during International Ocean Discovery Program (IODP) Expedition 374 in 2018. Hole U1525A is located on the southwestern external levee of the Hillary Canyon (Ross Sea, Antarctica) and the depositional lobe of the nearby trough-mouth fan. Using core descriptions, grain size analysis, and physical properties datasets, we develop a lithofacies scheme that allows construction of a detailed depositional model and environmental history of past ice sheet-ocean interactions at the eastern Ross Sea continental shelf break/slope since ~2.4 Ma. The earliest Pleistocene interval (~2.4- ~ 1.4 Ma) represents a hemipelagic environment dominated by ice-rafting and reworking/deposition by relatively persistent bottom current activity. Finely interlaminated silty muds with ice-rafted debris (IRD) layers are interpreted as contourites. Between ~1.4 and ~0.8 Ma, geostrophic bottom current activity was weaker and turbiditic processes more common, likely related to the increased proximity of grounded ice at the shelf edge. Silty, normally-graded laminations with sharp bases may be the result of flow-stripped turbidity currents overbanking the canyon levee during periods when ice was grounded at or proximal to the shelf edge. A sandy, IRD- and foraminifera-bearing interval dated to ~1.18 Ma potentially reflects warmer oceanographic conditions and a period of stronger Antarctic Slope Current flow. This may have enhanced upwelling of warm Circumpolar Deep Water onto the shelf, leading to large-scale glacial retreat at that time. The thickest interval of turbidite interlamination was deposited after ~1 Ma, following the onset of the Mid-Pleistocene Transition, interpreted as a time when most ice sheets grew and glacial periods were longer and more extreme. Sedimentation after ~0.8 Ma was dominated by glacigenic debris flow deposition, as the trough mouth fan that dominates the eastern Ross Sea continental slope prograded and expanded over the site. These findings will help to improve estimations of WAIS ice extent in future Ross Sea shelf-based modelling studies, and provide a basis for more detailed analysis of the inception and growth of the WAIS under distinct oceanographic conditions.

Biomarker Fingerprint of Debris Flow Deposits as a Paleoproxy for IRD Sources in the Last Glacial North Atlantic

AbstractInvestigating the spatiotemporal dynamics of iceberg discharges during the last glacial period constitutes a major challenge for paleoclimate research. In recent decades, many ice‐rafted debris (IRD) provenance studies, mostly based on the comparison of the inorganic signature of IRD‐rich layers and surrounding continental bedrock, have differentiated main subareas of individual ice sheets as iceberg sources and gauged their dynamic interplay. Diagnosis of specific source ice streams has nonetheless remained limited. Here we propose a new IRD provenance methodology to refine the identification of iceberg sources. It relies on the organic geochemical characterization of glacigenic debris flow (GDF) deposits to obtain the biomarker fingerprint of IRD sources. To test its potential, we analyze the composition of n‐alkanes and chlorophyll‐derived pigments in sediments deposited within six major North Atlantic GDF depocenters fed by ice streams draining the surrounding ice sheets. The biomarker fingerprint of GDF deposits appears to (1) be consistent with a common origin of IRD and GDF deposits through erosion of outcrops and transport by ice streams, (2) differ significantly from that of ambient hemipelagic sediments, (3) be specific and unique to each GDF depocenter, making it possible to distinguish the corresponding specific ice streams, (4) be imprinted in IRD‐bearing marine sediments, and (5) have remained homogeneous enough through the last glacial to be used as a proxy for IRD sources. The biomarker fingerprint of GDF deposits thus shows strong potential to track the specific source ice streams that delivered IRD to the last glacial North Atlantic.

Sedimentology and history of sediment sources to the NW Labrador Sea during the past glacial cycle

The paleoceanography and sediment dynamics of the northernmost Labrador Sea provides critical records of glacial history, glacially-dominated sedimentation, and paleocirculation. A reference core at 938 m on the SE Baffin Slope was investigated with new oxygen isotope stratigraphy, X-ray fluorescence geochemistry, and 18 14C-AMS dates and correlated to 14 regional deep-water cores. The reference core provides a paleoceanographic and sediment source record over the last 40 ka, overlying a 3-m-thick blocky mass-transport deposit over MIS 5 autochthonous sediment. Detrital carbonate-rich sediment layers H0-H4, based on bulk geochemistry, were derived principally from Hudson Strait. Shortly after H2 and H3, the shelf-crossing Cumberland Sound ice stream supplied dark brown ice-proximal stratified sediments. Minor supply of carbonate-rich sediment from Baffin Bay allows chronologic integration of the Baffin Bay and Labrador Sea detrital carbonate records and implies an open seaway through Davis Strait. The counterparts of H3, H4, and (?)H5 events in the deep Labrador basin are 4–10 m thick units of thin-bedded carbonate-rich mud turbidites from glacigenic debris flows on the Hudson Strait slope. The behavior of the Hudson Strait ice stream changed through the last glacial cycle. In H1 and H2, the ice stream retreated back across the shelf but did not deglaciate Hudson Bay; in H3–H5 it remained at the shelf break long enough to supply thick turbidites, and subsequent retreat after H4 and H5 deglaciated Hudson Bay. The maximum extent of ice streams in Hudson Strait, Cumberland Sound, and Lancaster Sound was not synchronous.

Fluid flow and pore pressure development throughout the evolution of a trough mouth fan, western Barents Sea

AbstractUsing a combination of geophysical and geotechnical data from Storfjorden Trough Mouth Fan off southern Svalbard, we investigate the hydrogeology of the continental margin and how this is affected by Quaternary glacial advances and retreats over the continental shelf. The geotechnical results show that plumites, deposited during the deglaciation, have high porosities, permeabilities and compressibilities with respect to glacigenic debris flows and tills. These results together with margin stratigraphic models obtained from seismic reflection data were used as input for numerical finite element models to understand focusing of interstitial fluids on glaciated continental margins. The modelled evolution of the Storfjorden TMF shows that tills formed on the shelf following the onset of glacial sedimentation (ca. 1.5 Ma) acted as aquitards and therefore played a significant role in decreasing the vertical fluid flow towards the sea floor and diverting it towards the slope. The model shows that high overpressure ratios (up to λ ca. 0.6) developed below the shelf edge and on the middle slope. A more detailed model for the last 220 kyrs accounting for ice loading during glacial maxima shows that the formation of these aquitards on the shelf focused fluid flow towards the most permeable plumite sediments on the slope. The less permeable glacigenic debris flows that were deposited during glacial maxima on the slope hinder fluid evacuation from plumites allowing high overpressure ratios (up to λ ca. 0.7) to develop in the shallowest plumite layers. These high overpressures likely persist to the Present and are a critical precondition for submarine slope failure.

Late Cenozoic Erosion Estimates for the Northern Barents Sea: Quantifying Glacial Sediment Input to the Arctic Ocean

AbstractA compilation of seismic data has been used to characterize the Neogene‐Quaternary sedimentary succession of the northwestern Barents Sea continental margin to better understand the paleoenvironmental evolution and the sedimentary processes involved. The Neogene strata are dominated by contourites related to the ocean circulation established from the opening of the Fram Strait connecting the Atlantic and the Arctic Oceans (< ~17.5 Ma). The upper Plio‐Pleistocene strata (< ~2.7 Ma) are dominated by stacked gravity‐driven deposits forming trough‐mouth fans that were sourced from paleo‐ice streams. Within the interfan areas, contouritic sedimentation prevailed. Thus, this margin provides an example of interaction of glacigenic debris flows, contour currents, and hemipelagic/glacimarine sedimentary processes. A total of ~29,000 km3 of sediments with an average sedimentation rate of about 0.24 m/Kyr were estimated. These numbers reflect the sediment input to this part of the Arctic Ocean from the northwestern Barents Sea shelf and adjacent land areas. For the first time, the average erosion and erosion rates for this source area are estimated using a mass balance approach. Approximately 410–650 m of erosion has on average occurred, corresponding to an average erosion rate of ~0.15–0.24 m/Kyr. These rates are comparable to those reported from other glaciated margins, including the western Svalbard and mid‐Norway margin, but up to only half the rates reported from the western Barents Sea margin. This variation is interpreted due to the size and bedrock types of the drainage area, ice dynamics, and the continental slope gradient.

NE Atlantic continental slope stability from a numerical modeling perspective

Trough mouth fans are environments characterized by high sediment supply during glacial stages and the occurrence of large-scale instabilities. The geological record indicates that several of these environments have failed repeatedly resulting in large submarine landslides. The roles of sedimentation rate, weak layers, glacial loading and unloading as well as seismic activity on triggering megaslides in trough-mouth-fan systems is still unclear. A better understanding of the preconditioning factors, triggers and consequences of these landslides is crucial due to the hazard they pose to coastal communities and offshore industries.In this paper, we focus on the North Sea Trough Mouth Fan, which is the result of massive glacial sediment input delivered to the shelf edge through the Norwegian Channel, southeast Nordic Seas margin. The Tampen Slide, one of several large paleo-landslides that have happened within the North Sea Trough Mouth Fan, took place at c. 130 ka (end of MIS 6), and removed an estimated 1800 km3 of sediment.Here, we use boundary conditions from the Tampen Slide and 2D Finite Element Modeling (Abaqus software from Simulia) to evaluate the effects of variations in sedimentation rates as well as sediment properties on the generation of excess pore pressure, fluid flow, and slope stability along the axis of the trough-mouth-fan system. The model domain, 40 km in length and 2 km in height, is dominated by glacigenic debris flows and glacimarine sediment deposits. We use geotechnical data measured on samples of glacigenic and glacimarine sediment deposits from the nearby Ormen Lange gas field area to constrain the model. We evaluate the stability of the slope under various scenarios, including constant sediment loading, episodic changes in sedimentation rates and abrupt pulses in sediment delivery for a 61 kyr period (MIS 6). The models show that increased sedimentation rates during glacial stages do not generate sufficient excess pore pressure to set off a landslide. Furthermore, the simulated overpressures for the different sedimentation scenarios do not significantly differ at the end of the model runs. The results also highlight the importance of a basal glacimarine sediment layer underneath the rapidly-deposited sediments for the build-up of overpressure. Consequently, this glacimarine sediment layer has the inherited potential to act as a weak layer facilitating instability. However, as overpressure due to sediment deposition alone does not result in slope failure, we couple the preconditioned slope with earthquake ground shaking. Based on attenuation models, an earthquake of approximately M6.9 or larger at a short distance from the Tampen Slide headwall could have triggered the landslide. Therefore, we suggest glacial sedimentation and a glacimarine sediment layer to represent preconditioning factors, and seismic shaking as the final trigger mechanism for the Tampen Slide, i.e. similar to the situation that lead to the development of the Storegga Slide in the same area.

Morphology and pattern of Quaternary sedimentation in the North Sea Basin (52–62°N)

Abstract The Quaternary North Sea Basin, which extends from northwest mainland Europe in the south (52°N) to the Norwegian Sea in the north (62°N), contains a thick (up to 1 km) sedimentary succession that records the changing nature of sediment supply from surrounding land areas during the last c.2.6 Ma. We use an extensive 2D and 3D seismic database to correlate major Quaternary seismo-stratigraphic surfaces and units across the North Sea and reconstruct the broad-scale infill pattern of the entire Quaternary North Sea Basin. The total volume of Quaternary sediments in the North Sea (350 000 km2) is c.140 000 km3, while the area inside the 500 m contour of the base-Quaternary surface has a volume of 109 000 km3. Two largely independent depocentres developed in the North Sea Basin during the early Quaternary: the southern and central sub-basin was infilled by shelf fluvio-deltaic and prodeltaic sediments delivered from the east and south-east, whilst the northern sub-basin was infilled mainly by prograding glacigenic debris-flows deposited from an ice mass centred on the Norwegian mainland. Contour currents were an important mechanism of sediment deposition and reworking, with water circulation in the basin probably occurring in an anti-clockwise direction. Whilst most of the southern North Sea Basin was infilled by around 1.6–1.7 Ma, a depression persisted in the central North Sea until around 1 Ma. The analysis of landforms on 3D seismic data suggests that the Fennoscandian Ice Sheet (FIS) extended intermittently to the palaeo-shelf break in the northern North Sea during the earliest Quaternary and expanded into the central North Sea prior to the excavation of the Norwegian Channel.

Along-slope variations in sediment lithofacies and depositional processes since the Last Glacial Maximum on the northeast Baffin margin, Canada

Twelve piston cores were used to characterize late Quaternary lithofacies, depositional processes and deglacial history along the Baffin Bay slope between Lancaster Sound and Home Bay. Core investigations show four distinct laterally correlatable lithofacies along the slope – basal and upper diamicton, laminated red brown mud, tan carbonate gravelly, sandy mud and bioturbated brown mud. Basal diamicton largely represents glacigenic debris flow deposits during a glacial advance from Baffin Island at ~25 cal ka. The distribution and character of laminated red brown mud suggests a lateral supply to Baffin Bay slope from ice-proximal meltwater plumes and turbidity currents sourced in glacial ice from both Baffin Bay shelf and Home Bay between 41.5 cal ka to ~14.2 cal ka. An upper diamicton records a lesser, localized glacial advance that ended at about 14.2 cal ka. Tan carbonate mud events represent ice-rafted, enhanced detrital carbonate delivery to the slope between ~25 cal ka and ~11 cal ka. A gradual thinning of these events, from northern to southern Baffin Bay, corroborates a northern Baffin Bay, Lancaster Sound or Nares Strait iceberg source. Proglacial facies seaward of Home Bay contain beds with slightly elevated detrital carbonate that may represent the distal edge of carbonate ice-rafted from Lancaster Sound. Baffin Bay is a type example of a polar glacial basin in which direct glacial supply predominates over the effects of glacial meltwater. As a result, axial supply from the large ice streams north of Baffin Bay (particularly Lancaster Sound) is dominant in the Baffin Bay basin and lateral supply from smaller ice streams on Baffin Island predominates on the NE Baffin Slope.

Architecture and sedimentary processes on the mid-Norwegian continental slope: A 2.7 Myr record from extensive seismic evidence

Quaternary architectural evolution and sedimentary processes on the mid-Norwegian continental slope are investigated using margin-wide three- and two-dimensional seismic datasets. Of ∼100,000 km3 sediments delivered to the mid-Norwegian shelf and slope over the Quaternary, ∼75,000 km3 comprise the slope succession. The structural high of the Vøring Plateau, characterised by initially low (∼1–2°) slope gradients and reduced accommodation space, exerted a strong control over the long-term architectural evolution of the margin. Slope sediment fluxes were higher on the Vøring Plateau area, increasing up to ∼32 km3 ka−1 during the middle Pleistocene, when fast-flowing ice streams advanced to the palaeo-shelf edge. Resulted in a more rapid slope progradation on the Vøring Plateau, these rates of sediment delivery are high compared to the maximum of ∼7 km3 ka−1 in the adjacent sectors of the slope, characterised by steeper slope (∼3–5°), more available accommodation space and smaller or no palaeo-ice streams on the adjacent shelves. In addition to the broad-scale architectural evolution, identification of more than 300 buried slope landforms provides an unprecedented level of detailed, process-based palaeoenvironmental reconstruction. Channels dominate the Early Pleistocene record (∼2.7–0.8 Ma), during which glacimarine sedimentation on the slope was influenced by dense bottom-water flow and turbidity currents. Morphologic signature of glacigenic debris-flows appear within the Middle-Late Pleistocene (∼0.8–0 Ma) succession. Their abundance increases towards Late Pleistocene, marking a decreasing role for channelized turbidity currents and dense water flows. This broad-scale palaeo-environmental shift coincides with the intensification of Northern Hemispheric glaciations, highlighting first-order climate control on the sedimentary processes in high-latitude continental slopes.

High-resolution 3D seismic exhibits new insights into the middle-late Pleistocene stratigraphic evolution and sedimentary processes of the Bear Island trough mouth fan

Arctic Ocean trough mouth fans (TMFs) represent a valuable archive of glacial-interglacial sedimentary processes that are especially important when reconstructing pre-Weichselian glaciations that may lack distinct imprints on the shelves. In 2011, we acquired the first high-resolution 3D seismic cube (~3 m vertical and 6 m horizontal resolution) on the continental slope of the SW Barents Sea by use of a P-Cable 3D system, to study in detail the seismic stratigraphy and glacial depositional history of the Bear Island Trough Mouth Fan. This technology provides data with a resolution that, for the first time on the western Barents Sea slope, enables detailed mapping of deposits of different glacial cycles. The dataset provides entire spatially coverage, allowing us to reconcile multiple generations of glacigenic deposits and channel systems. High-resolution 3D seismic data is crucial to describe buried channels, glacial units, as well as low relief landforms such as sediment waves accurately. The 30 km2 seismic cube is located at the southern flank of the Bear Island TMF at water depths from 592 to 660 m where sandwaves dominate the present seafloor. The data covers the glacially derived stratigraphy in the uppermost ~700 m below the seafloor. We establish a robust stratigraphic framework by interpreting seismic reflectors along 2D tie-in lines to previously well-constrained seismic and well data. We find that our data provide a record of progradation of glacigenic debris flows (GDFs) since MIS 12 (0.5 Ma) to present. Horizon slices reveal a range of gullies and channels at different depths overlying the GDFs. We describe the paleoenvironment and sedimentary processes throughout this time-span (that covers seven glacial cycles) and discuss the impact of the Barents Sea Ice Sheet waxing and waning on erosion, sedimentation, and deposition along the continental slope. Abundant buried gullies were hitherto unknown at the Bear Island TMF, with previous work describing this succession as a debris-flow dominated unit where meltwater-related features are lacking, and interpreting this to represent low average temperatures. By use of the relatively small high-resolution 3D seismic dataset, we provide new evidence for the presence of gullies and channels indicating that periods of ice sheet melting and meltwater runoff existed throughout the middle-late Pleistocene succession. The work offers new insight into the stratigraphic evolution of a continental margin dominated by GDFs and demonstrates the value of high-resolution seismic, such as the P-Cable system, in resolving important details of paleo-slope-environments.

Processes influencing differences in Arctic and Antarctic trough mouth fan sedimentology

Abstract Trough mouth fans (TMFs) are sediment depocentres that form along high-latitude continental margins at the mouths of some cross-shelf troughs. They reflect the dynamics of past ice sheets over multiple glacial cycles and processes operating on (formerly) glaciated continental shelves and slopes, such as erosion, reworking, transport and deposition. The similarities and differences in TMF morphology and formation processes in the Arctic and Antarctic regions remain poorly constrained. We analyse the dimensions and geometries of 15 TMFs from Arctic and Antarctic margins and the grain size distribution of 82 sediment cores centred on them. We compare the grain size composition of sub- and proglacial diamictons deposited on the shelves and glacigenic debris flows deposited on the adjacent TMFs and find a significant difference between Arctic and Antarctic margins. Antarctic margins show a coarser grain size composition for both glacigenic debris flows and shelf diamictons. This significant difference provides insight into high-latitude sediment input, transportation and glacial–interglacial regimes. We suggest that surface runoff and river discharge are responsible for enhanced fine-grained sediment input in the Arctic compared with the Antarctic.

The role of meltwater in high-latitude trough-mouth fan development: The Disko Trough-Mouth Fan, West Greenland

The Disko Trough-Mouth Fan (TMF) is a major submarine sediment fan located along the central west Greenland continental margin offshore of Disko Trough. The location of the TMF at the mouth of a prominent cross-shelf trough indicates that it is a product of repeated glacigenic sediment delivery from former fast-flowing outlets of the Greenland Ice Sheet, including an ancestral Jakobshavn Isbrae, which expanded to the shelf edge during successive glacial cycles. This study focuses on the uppermost part of the fan stratigraphy and analyses multibeam swath bathymetry and sub-bottom profiler records, supplemented by a series of vibrocores up to 6 m in length. The swath bathymetry data show that the surface of the fan is prominently gullied and channelled with channels extending downslope from a series of shelf-edge incising gullies. Sub-bottom profiles from across- and down-fan show that the fan sediments are often acoustically stratified. Glacigenic-debris flows (GDFs) were recovered in sediment cores from the uppermost slope but they are absent in cores from elsewhere on the fan. Instead, glacimarine lithofacies in the Disko TMF are dominated by turbidites, hemipelagic sediments and IRD. The gullied and channelled surface of the fan implies erosion at the base of dense, sediment-laden, turbidity currents related to the delivery of meltwater and sediment from an ice sheet grounded at the shelf edge. Such meltwater-related fans have been documented previously on mid-latitude, glacier-influenced margins, but they have rarely been described from high-latitude settings. Although GDFs are often regarded as the building blocks of TMFs, the morphology and sedimentary architecture of the uppermost, Late Quaternary part of the Disko TMF indicates that it represents a clear example of a fan in which sediment delivery is strongly influenced by meltwater. This implies that there is a spectrum of TMFs on glaciated continental margins that reflects the relative dominance of meltwater processes vs. GDFs. It highlights the variability in fan morphology and mechanisms of sediment delivery on high-latitude TMFs and shows that the classic Polar North Atlantic model of GDF dominated fans is but one of a number of styles for such large-scale, high-latitude glacimarine sedimentary depocentres.

Glacially influenced morphodynamic features – examples from the north Faroe margin

High resolution reflection seismic data, subbottom profiler and side scan sonar information, together with results from sediment core studies, have been used to study various glacially influenced morphodynamic features on the northern Faroese continental margin. On the shelf and upper slope a thick, buried turbate complex has been found, which we estimate to have been formed between ca 470,000 and 120,000yearsBP. We interpret this turbate to be the result of episodic, extensive iceberg grounding during extreme glaciation within the period MIS 12–MIS 6 (Elster-Saale complex). Late MIS 6 is found to be the most likely age of the last episode of turbate formation as suggested by age/depth correlation with dated sediment cores from the nearby area. The origin of the iceberg turbate may be attributed to deglacial drift of deep-draft icebergs from icestream sources in the Arctic, East Greenland and/or northern Iceland. At the base of slope and adjacent deep-water area a complex of mud diapir features has been observed. Our data show that activation of these features are the result of density inversion processes caused by fine-grained, unconsolidated hemipelagic deposits being overlain by dense, glacigenic North Sea Fan (NSF) deposits. Due to sudden and fast accumulation of the fan sediments, a normal and regular compaction and dewatering of the underlying hemipelagic sediments could not occur; instead, sub-seabed sediment mobilisation took place resulting in enhanced diapir formation. A general intensification of the diapiric processes is likely related to the MIS 6 (Saalian) glacial period, as NSF-derived glacigenic debris flows reached the northern outlet of the Faroe-Shetland Channel. The most recent diapir activity is concluded to have occurred during the last (Weichselian) glaciation.

Sediment properties in submarine mass-transport deposits using seismic and rock-physics off NW Barents Sea

Submarine mass movements may have profound effects on the morphology and stratigraphic architecture of continental margins. Furthermore, they can represent a threat to human life and infrastructures, and also have implications for hydrocarbon exploration/production. In polar regions, they are one of the predominant sedimentary processes on the continental slope. Exploration seismology has been widely employed to study mass-transport deposits (landslides, glacigenic debris flows, mass flows, etc.), which are usually characterized by chaotic reflections. In this study, we analyse a seismic profile acquired in the southern part of the Storfjorden trough mouth fan (NW Barents Sea margin), showing the presence of two submarine mass-transport deposits (MTDs). A giant MTD (PLS-1) is located on the lower continental slope at 2.6–3km depth, while a more recent MTD (PLS-2) occurs at 1.9–2.4km depth. Velocity and attenuation seismic tomography, seismic attributes analyses and rock-physics models reveal distinct petrophysical properties for PLS-1 and PLS-2. Despite the known influence of burial depth(s), fluid flow content, and compaction on the internal character of MTDs, the two deposits studied here, in fact, show distinct petrophysical characteristics that reflect lithological variations - more than to any other control. These results suggest different source areas for the two MTDs. The inferred coarser sediment in PLS-1 indicates provenance from areas with abundant glacigenic debris flows, (such as the Bjørnøya Trough-Mouth Fan). Conversely, the finer, relatively fluid-rich sediments of PLS-2 that underwent little translation could have an origin in the area between trough-mouth fans. Here, slow-moving ice resulted in a relatively scarce release of subglacial debris at the shelf edge and the continental slope was subject to enhanced erosion and degradation with a comparatively higher production of relatively fine-grained turbidite flows.

Landform assemblages and sedimentary processes along the Norwegian Channel Ice Stream

Several regional and detailed bathymetric datasets together with 2D and 3D seismic data are compiled to investigate the landform assemblages and sedimentary processes along the former path of the Norwegian Channel Ice Stream (NCIS). At the broad scale, the glacial geomorphology and sedimentary architecture reveals three different zones along the ice-stream path, characterized by: (1) glacial erosion in the onset zone and inner shelf area, (2) sediment transport through the main trunk of the ice stream across the mid-shelf, and (3) a zone of deposition towards the outer continental shelf edge. Along the first 400km of the ice stream bed (outer Oslofjord–Skagerrak–Stavanger) a major overdeepening is associated with suites of crag-and-tail features at the transition from the crystalline bedrock to the sedimentary bedrock, together with evidence of glaciotectonic thrusting in the form of hill-hole pairs. Here we interpret extensive erosion of both sedimentary rocks and Quaternary sediments. This zone is succeeded by an approximately 400km long zone, through which most of the sediments eroded from the inner shelf were transported, rather than being deposited. We infer that sediment was transported subglacially and is likely to have been advected downstream by soft sediment deformation. The thickness of till of inferred Weichselian age generally varies from 0 and 50m and this zone is characterized by mega-scale glacial lineations (MSGLs) which we interpret to be formed in a dynamic sedimentary system dominated by high sediment fluxes, but with some localized sediment accretion associated with lineations. Towards the shelf break, the North Sea Fan extends to the deep Norwegian Sea, and reflects massive sedimentation of glacigenic debris onto the continental slope. Numerous glacigenic debris flows accumulated and constructed a unit up to 400m thick during the Last Glacial Maximum. The presence of these three zones (erosion, transport, deposition) is consistent with observations from other palaeo-ice streams and their significance arises from their potential to feedback and impact on ice stream dynamics.