Gibson Assembly Research Articles

All-in-one: a robust fluorescent fusion protein vector toolbox for protein localization and BiFC analyses in plants.

SummaryFluorescent tagging protein localization (FTPL) and bimolecular fluorescence complementation (BiFC) are popular tools for in vivo analyses of the subcellular localizations of proteins and protein–protein interactions in plant cells. The efficiency of fluorescent fusion protein (FFP) expression analyses is typically impaired when the FFP genes are co‐transformed on separate plasmids compared to when all are cloned and transformed in a single vector. Functional genomics applications using FFPs such as a gene family studies also often require the generation of multiple plasmids. Here, to address these needs, we developed an efficient, modular all‐in‐one (Aio) FFP (AioFFP) vector toolbox, including a set of fluorescently labelled organelle markers, FTPL and BiFC plasmids and associated binary vectors. This toolbox uses Gibson assembly (GA) and incorporates multiple unique nucleotide sequences (UNSs) to facilitate efficient gene cloning. In brief, this system enables convenient cloning of a target gene into various FFP vectors or the insertion of two or more target genes into the same FFP vector in a single‐tube GA reaction. This system also enables integration of organelle marker genes or fluorescently fused target gene expression units into a single transient expression plasmid or binary vector. We validated the AioFFP system by testing genes encoding proteins known to be functional in FTPL and BiFC assays. In addition, we performed a high‐throughput assessment of the accurate subcellular localizations of an uncharacterized rice CBSX protein subfamily. This modular UNS‐guided GA‐mediated AioFFP vector toolkit is cost‐effective, easy to use and will promote functional genomics research in plants.

Librator: a platform for the optimized analysis, design, and expression of mutable influenza viral antigens.

Artificial mutagenesis and protein engineering have laid the foundation for antigenic characterization and universal vaccine design for influenza viruses. However, many methods used in this process require manual sequence editing and protein expression, limiting their efficiency and utility in high-throughput applications. More streamlined in silico tools allowing researchers to properly analyze and visualize influenza viral protein sequences with accurate nomenclature are necessary to improve antigen design and productivity. To address this need, we developed Librator, a system for analyzing and designing custom protein sequences of influenza virus hemagglutinin (HA) and neuraminidase (NA) glycoproteins. Within Librator's graphical interface, users can easily interrogate viral sequences and phylogenies, visualize antigen structures and conservation, mutate target residues and design custom antigens. Librator also provides optimized fragment design for Gibson Assembly of HA and NA expression constructs based on peptide conservation of all historical HA and NA sequences, ensuring fragments are reusable and compatible across related subtypes, thereby promoting reagent savings. Finally, the program facilitates single-cell immune profiling, epitope mapping of monoclonal antibodies and mosaic protein design. Using Librator-based antigen construction, we demonstrate that antigenicity can be readily transferred between HA molecules of H3, but not H1, lineage viruses. Altogether, Librator is a valuable tool for analyzing influenza virus HA and NA proteins and provides an efficient resource for optimizing recombinant influenza antigen synthesis.

ApE, A Plasmid Editor: A Freely Available DNA Manipulation and Visualization Program.

A plasmid Editor (ApE) is a free, multi-platform application for visualizing, designing, and presenting biologically relevant DNA sequences. ApE provides a flexible framework for annotating a sequence manually or using a user-defined library of features. ApE can be used in designing plasmids and other constructs via in silico simulation of cloning methods such as PCR, Gibson assembly, restriction-ligation assembly and Golden Gate assembly. In addition, ApE provides a platform for creating visually appealing linear and circular plasmid maps. It is available for Mac, PC, and Linux-based platforms and can be downloaded at https://jorgensen.biology.utah.edu/wayned/ape/.

Efficient Generation of Genome-wide Libraries for Protein-ligand Screens Using Gibson Assembly.

Genome-wide screens using yeast or phage displays are powerful tools for identifying protein-ligand interactions, including drug or vaccine targets, ligand receptors, or protein-protein interactions. However, assembling libraries for genome-wide screens can be challenging and often requires unbiased cloning of 10 5 -10 7 DNA fragments for a complete representation of a eukaryote genome. A sub-optimal genomic library can miss key genomic sequences and thus result in biased screens. Here, we describe an efficient method to generate genome-wide libraries for yeast surface display using Gibson assembly. The protocol entails genome fragmentation, ligation of adapters, library cloning using Gibson assembly, library transformation, library DNA recovery, and a streamlined Oxford nanopore library sequencing procedure that covers the length of the cloned DNA fragments. We also describe a computational pipeline to analyze the library coverage of the genome and predict the proportion of expressed proteins. The method allows seamless library transfer among multiple vectors and can be easily adapted to any expression system.

Efficient Generation of Stable Cell Lines with Inducible Neuronal Transgene Expression Using the piggyBac Transposon System.

The piggyBac transposon system has been adapted to be a highly efficient genome engineering tool for transgenesis of eukaryotic cells and organisms. As with other methods of transgenesis, incorporation of an inducible promoter, such as a tetracycline-responsive element, enables inducible transgene expression. Here, we describe an efficient method of using the piggyBac system to create stably transfected mammalian cell lines, including inducible transgene expression. Gibson assembly is used to construct the required vectors as it enables multiple DNA fragments to be seamlessly assembled in a single isothermal reaction. We demonstrate an application of this approach to generate a stably transfected pluripotent stem cell line that can be induced to express a transcription factor transgene and rapidly differentiate into neurons in a single step.

Generation of Markerless Gene Deletion Mutants in Listeria monocytogenes Using a Mutated pheS for Counterselection.

Gene alteration/deletion by allelic exchange is the preferred strategy for gene manipulation in bacteria. Here we present the fundamentals for an efficient allelic exchange gene deletion method in the bacterial pathogen Listeria monocytogenes. Combining vector generation by Gibson assembly with a counterselection system based on the mutated phenylalanine synthetase (pheS*) makes the generation of gene deletion mutants straightforward and time efficient.

Simple and Rapid Assembly of TALE Modules Based on the Degeneracy of the Codons and Trimer Repeats.

Transcription activator-like effectors (TALEs) have been effectively used for targeted genome editing, transcriptional regulation, epigenetic modification, and locus-specific DNA imaging. However, with the advent of the clustered regularly interspaced short palindromic repeat/Cas9 system, an easy-to-use tool with the same function as TALEs, TALEs have recently been abandoned because of their complexity, time consumption, and difficult handling in common labs. Here, we described a degenerated codon-based TALE assembly system for simple, rapid, and efficient TALE assembly. TALE trimers with nonrepetitive DNA sequences were amplified by PCR and sequentially assembled via Gibson assembly. Our method is cost-effective, requires only commonly used basic molecular biology reagents, and takes only 2 h from target sequence analysis to completion. This simple, rapid, and lab-friendly TALE assembly method will restore the value of TALEs in DNA targeting.

A standardised hERG phenotyping pipeline to evaluate KCNH2 genetic variant pathogenicity.

Background and aimsMutations in KCNH2 cause long or short QT syndromes (LQTS or SQTS) predisposing to life‐threatening arrhythmias. Over 1000 hERG variants have been described by clinicians, but most remain to be characterised. The objective is to standardise and accelerate the phenotyping process to contribute to clinician diagnosis and patient counselling. In silico evaluation was also included to characterise the structural impact of the variants.MethodsWe selected 11 variants from known LQTS patients and two variants for which diagnosis was problematic. Using the Gibson assembly strategy, we efficiently introduced mutations in hERG cDNA despite GC‐rich sequences. A pH‐sensitive fluorescent tag was fused to hERG for efficient evaluation of channel trafficking. An optimised 35‐s patch‐clamp protocol was developed to evaluate hERG channel activity in transfected cells. R software was used to speed up analyses.ResultsIn the present work, we observed a good correlation between cell surface expression, assessed by the pH‐sensitive tag, and current densities. Also, we showed that the new biophysical protocol allows a significant gain of time in recording ion channel properties and provides extensive information on WT and variant channel biophysical parameters, that can all be recapitulated in a single parameter defined herein as the repolarisation power. The impacts of the variants on channel structure were also reported where structural information was available. These three readouts (trafficking, repolarisation power and structural impact) define three pathogenicity indexes that may help clinical diagnosis.ConclusionsFast‐track characterisation of KCNH2 genetic variants shows its relevance to discriminate mutants that affect hERG channel activity from variants with undetectable effects. It also helped the diagnosis of two new variants. This information is meant to fill a patient database, as a basis for personalised medicine. The next steps will be to further accelerate the process using an automated patch‐clamp system.

A Language for Modeling and Optimizing Experimental Biological Protocols

Automation is becoming ubiquitous in all laboratory activities, moving towards precisely defined and codified laboratory protocols. However, the integration between laboratory protocols and mathematical models is still lacking. Models describe physical processes, while protocols define the steps carried out during an experiment: neither cover the domain of the other, although they both attempt to characterize the same phenomena. We should ideally start from an integrated description of both the model and the steps carried out to test it, to concurrently analyze uncertainties in model parameters, equipment tolerances, and data collection. To this end, we present a language to model and optimize experimental biochemical protocols that facilitates such an integrated description, and that can be combined with experimental data. We provide probabilistic semantics for our language in terms of Gaussian processes (GPs) based on the linear noise approximation (LNA) that formally characterizes the uncertainties in the data collection, the underlying model, and the protocol operations. In a set of case studies, we illustrate how the resulting framework allows for automated analysis and optimization of experimental protocols, including Gibson assembly protocols.

Fast Track hERG phenotyping to evaluate the pathogenicity of KCNH2 genetic variants

Mutations in KCNH2 (coding for hERG) cause long or short QT syndromes (LQTS or SQTS), predisposing to life-threatening arrhythmias. More than 1000 variations in hERG sequences have been described, most of them are to be characterized. The objective is to standardize and accelerate the entire process necessary to phenotype hERG variants. An in silico evaluation was also included to characterize the structural impact of the variants. We selected 12 variants from patients with LQTS, and 1 with SQTS. We optimized the protocol to efficiently introduce mutations in hERG cDNA despite GC-rich sequences, using the Gibson assembly strategy. A pH-sensitive fluorescent tag was fused to hERG for fast-track evaluation of hERG cell trafficking. An optimized patch-clamp protocol of 35 sec was developed to evaluate hERG channel activity in transfected cells. R software was used to speed up analyses. In the present work, we observed a good correlation between cell surface expression, assessed by the pH-sensitive tag, and current densities. Also, we showed that the new biophysical protocol allows a significant gain of time in recording ion channel properties and provides extensive information on WT and variant channel biophycical parameters, that can all be recapitulated in a single parameter defined herein as the repolarization power. The impact of the variants on channel structure were also reported where structural information was available. These three readouts (trafficking, repolarization power and structural impact) define 3 pathogenicity indexes that may help clinical diagnosis. Fast track characterization of KCNH2 genetic variants shows its relevance to discriminate mutants that affect hERG channel activity from variants with undetectable effects. This information is meant to fill a patient database, as a basis for personalized medicine. The next steps will be to further accelerate the process using an automated patch-clamp system.

Complete Genome Sequencing and Infectious cDNA Clone Construction of Soybean Mosaic Virus Isolated from Shanxi.

Soybean mosaic virus (SMV) is the predominant viral pathogen that affects the yield and quality of soybean. The natural host range for SMV is very narrow, and generally limited to Leguminosae. However, we found that SMV can naturally infect Pinellia ternata and Atractylodes macrocephala. In order to clarify the molecular mechanisms underlying the cross-family infection of SMV, we used double-stranded RNA extraction, rapid amplification of cDNA ends polymerase chain reaction and Gibson assembly techniques to carry out SMV full-length genome amplification from susceptible soybeans and constructed an infectious cDNA clone for SMV. The genome of the SMV Shanxi isolate (SMV-SX) consists of 9,587 nt and encodes a polyprotein consisting of 3,067 aa. SMV-SX and SMV-XFQ008 had the highest nucleotide and amino acid sequence identities of 97.03% and 98.50%, respectively. A phylogenetic tree indicated that SMV-SX and SMV-XFQ018 were clustered together, sharing the closest relationship. We then constructed a pSMV-SX infectious cDNA clone by Gibson assembly technology and used this clone to inoculate soybean and Ailanthus altissima; the symptoms of these hosts were similar to those caused by the virus isolated from natural infected plant tissue. This method of construction not only makes up for the time-consuming and laborious defect of traditional methods used to construct infectious cDNA clones, but also avoids the toxicity of the Potyvirus special sequence to Escherichia coli, thus providing a useful cloning strategy for the construction of infectious cDNA clones for other viruses and laying down a foundation for the further investigation of SMV cross-family infection mechanisms.

Erratum: CRISPR/Cas9-mediated Targeted Integration In Vivo Using a Homology-mediated End Joining-based Strategy.

An erratum was issued for: Studying TGF-β Signaling and TGF-β-induced Epithelial-to-mesenchymal Transition in Breast Cancer and Normal Cells. The phrases"surveyor assay"and"SurveyorNuclease" havebeen updated to "T7E1 assay" to " T7endonuclease I" respectively. Step 1.2 inthe Protocol has been updated from: Surveyor nucleaseassay of sgRNA NOTE: The targeting efficiency of the sgRNA used for the knock-in experiment is evaluated by surveyor nuclease assay (also known as T7 endonuclease I (T7EI) assay)17. Select the sgRNA with high DNA cleavage efficiency and a low distance between the sgRNA cutting site and the stop codon. to: T7 endonuclease assay of sgRNA NOTE: The targeting efficiency of the sgRNA used for the knock-in experiment is evaluated by T7 endonuclease (T7EI)assay17. Select the sgRNA with high DNA cleavage efficiency and a low distance between the sgRNA cutting site and the stop codon. Figure 1 in the Representative Results has been updatedfrom: Figure 1: HMEJ-mediated targeted integration in vitro. (A) Experimental scheme for selection of sgRNAs: Six different sgRNAs (Cdx2-sgRNA1~Cdx2-sgRNA6) around the stop codon of the Cdx2 locus with a higher rank and off-target potential were chosen based on online CRISPR design tool. The protospacer adjacent motif (PAM) sequence is in red. (B) Experimental design: The Cas9-CMV-GFP expression plasmids expressing sgRNA, Cas9, and GFP were introduced into N2acells. GFP+ cells were sorted at day 3 for surveyor assay. (C) Surveyor assay for Cdx2 targeting: 6 different sgRNAs were designed for surveyor assay. Normal N2a cell genomic DNA serves as control. *, the sgRNA used for Cdx2-2A-mCherry knock-in experiment. (D) Schematic overview of construction of HMEJ donors using Gibson assembly. (E) Schematic overview of HMEJ-mediated gene targeting strategy at Cdx2 locus. HAL/HAR, left/right homology arm; triangles, sgRNA target sites; OF/OR, outer forward/reverse primer; IF/IR, inner forward/reverse primer. Figure modified from previous report10.Please click here to view a larger version of this figure. to: Figure 1: HMEJ-mediated targeted integration in vitro. (A) Experimental scheme for selection of sgRNAs: Six different sgRNAs (Cdx2-sgRNA1~Cdx2-sgRNA6) around the stop codon of the Cdx2 locus with a higher rank and off-target potential were chosen based on online CRISPR design tool. The protospacer adjacent motif (PAM) sequence is in red. (B) Experimental design: The Cas9-CMV-GFP expression plasmids expressing sgRNA, Cas9, and GFP were introduced into N2acells. GFP+ cells were sorted at day 3 for T7EIassay. (C) T7EI assay for Cdx2 targeting: 6 different sgRNAs were designed for T7EI assay. Normal N2a cell genomic DNA serves as control. *, the sgRNA used for Cdx2-2A-mCherry knock-in experiment. (D) Schematic overview of construction of HMEJ donors using Gibson assembly. (E) Schematic overview of HMEJ-mediated gene targeting strategy at Cdx2 locus. HAL/HAR, left/right homology arm; triangles, sgRNA target sites; OF/OR, outer forward/reverse primer; IF/IR, inner forward/reverse primer. Figure modified from previous report10.Please click here to view a larger version of this figure.

IS26cannot move alone

IS26 plays a major role in the dissemination of antibiotic resistance determinants in Gram-negative bacteria. To determine whether insertion sequence IS26 is able to move alone (simple transposition) or if it exclusively forms cointegrates. A two-step PCR using outward-facing primers was used to search for circular IS26 molecules. Gibson assembly was used to clone a synthetic IS26 containing a catA1 chloramphenicol resistance gene downstream of the tnp26 transposase gene into pUC19. IS activity in a recA-Escherichia coli containing the non-conjugative pUC19-derived IS26::catA1 construct and the conjugative plasmid R388 was detected using a standard mating-out assay. Transconjugants were screened for resistance. Circular IS26 molecules that would form with a copy-out route were not detected by PCR. The synthetic IS26::catA1 construct formed CmRTpR transconjugants (where CmR and TpR stand for chloramphenicol resistant and trimethoprim resistant, respectively), representing an R388 derivative carrying the catA1 gene at a frequency of 5.6 × 10-7 CmRTpR transconjugants per TpR transconjugant, which is comparable to the copy-in activity of the unaltered IS26. To test for simple transposition of IS26::catA1 (without the plasmid backbone), 1200 CmRTpR colonies were screened and all were resistant to ampicillin, indicating that the pUC19 backbone was present. Hence, IS26::catA1 had only formed cointegrates. IS26 is unable to move alone and cointegrates are the exclusive end products of the reactions mediated by the IS26 transposase Tnp26. Consequently, when describing the formation of complex resistance regions, simple 'transposition' of a single IS26 should not be invoked.

89723 CD105-targeted CAR T cells for the treatment of acute myeloid leukemia

ABSTRACT IMPACT: Our work might lead to a new treatment for patients with acute myeloid leukemia OBJECTIVES/GOALS: Acute myeloid leukemia (AML) is a devastating hematologic malignancy, with dismal 5-year survival. Chimeric antigen receptor (CAR) T cells have been approved for B cell malignancies but not for AML. The goal of this study is to explore the safety and efficacy of CAR T cells targeting CD105 (endoglin) to treat AML. METHODS/STUDY POPULATION: We have constructed human and murine CAR T cells targeting CD105. The CARs were created by sequencing the V(D)J regions of hybridomas and designing single chain variable fragments that target CD105 which were subsequently introduced in a CAR backbone via Gibson assembly. The CAR T cells were produced via transduction using retrovirus or lentivirus. Leukemia cell lines were assessed for CD105 expression with flow cytometry. Killing assays were performed via measurement of luminescence of target cells after co-culture with CAR T cells. Activation assays were performed with co-culture of CAR T cells and target cells and measurement of activation markers with flow cytometry. To assess in vivo efficacy and safety, murine CAR T cells were infused into C57BL/6J mice carrying B16 melanoma after lymphodepletion. RESULTS/ANTICIPATED RESULTS: All human leukemia cell lines assessed (Nalm6, MOLM-14, MV4-11, Kasumi-1, THP-1) expressed some degree of endoglin apart from the T cell leukemia Jurkat. Human CD105 CAR T cells were activated by co-culture with leukemia cell lines and effectively killed leukemia cells in vitro in a CD105-specific manner. Murine CAR T cells killed efficiently both murine solid tumors (B16 melanoma) and murine leukemias (C1498) in vitro. Murine CAR T cells did not exhibit any toxicity when infused after low-dose lymphodepletion (cyclophosphamide 100mg/kg) but caused significant morbidity after higher doses (cyclophosphamide 200mg/kg). Murine CAR T cells delayed the growth of B16 melanoma in immunocompetent mice. DISCUSSION/SIGNIFICANCE OF FINDINGS: We have constructed human and murine CD105 CAR T cells with excellent activity in vitro. The activity of human CD105 CAR T cells in xenografts and the biologic relevance of the toxicity of murine CD105 CAR T cells in humans needs to be further investigated. CD105 CAR T cells might prove an important therapeutic option for patients with AML.

Construction and Quantitation of a Selectable Protein Splicing Sensor Using Gibson Assembly and Spot Titers.

Inteins (intervening proteins) are translated within host proteins and removed through protein splicing. Conditional protein splicing (CPS), where the rate and accuracy of splicing are highly dependent on environmental cues, has emerged as a novel form of post-translational regulation. While CPS has been demonstrated for several inteins in vitro, a comprehensive understanding of inteins requires tools to quantitatively monitor their activity within the cellular context. Here, we describe a method for construction of a splicing-dependent system that can be used to quantitatively assay for conditions that modulate protein splicing. © 2021 Wiley Periodicals LLC. Basic Protocol 1: Construction of an intein-containing KanR2 library using Gibson assembly Basic Protocol 2: Phenotype determination using quantitative spot titers Support Protocol 1: Preparation of LB agar plates for spot titers Support Protocol 2: Preparation and transformation of competent M. smegmatis cells.

GAMER-Ad: a novel and rapid method for generating recombinant adenoviruses

Oncolytic adenoviruses have become ideal agents in the path toward treating cancer. Such viruses have been engineered to conditionally replicate in malignant cells in which certain signaling pathways have been disrupted. Other than such oncolytic properties, the viruses need to activate the immune system in order to sustain a long-term response. Therefore, oncolytic adenoviruses have been genetically modified to express various immune-stimulatory agents to achieve this. However, genetically modifying adenoviruses is very time consuming and labor intensive with the current available methods. In this paper, we describe a novel method we have called GAMER-Ad to genetically modify adenovirus genomes within 2 days. Our method entails the replacement of the gp19k gene in the E3 region with any given gene of interest (GOI) using Gibson Assembly avoiding the homologous recombination between the shuttle and the parental plasmid. In this manuscript as proof of concept we constructed and characterized three oncolytic adenoviruses expressing CXCL9, CXCL10, and interleukin-15 (IL-15). We demonstrate that our novel method is fast, reliable, and simple compared to other methods. We anticipate that our method will be used in the future to genetically engineer oncolytic but also other adenoviruses used for gene therapy as well.

An expanded auxin-inducible degron toolkit for Caenorhabditis elegans.

The auxin-inducible degron (AID) system has emerged as a powerful tool to conditionally deplete proteins in a range of organisms and cell types. Here, we describe a toolkit to augment the use of the AID system in Caenorhabditis elegans. We have generated a set of single-copy, tissue-specific (germline, intestine, neuron, muscle, pharynx, hypodermis, seam cell, anchor cell) and pan-somatic TIR1-expressing strains carrying a co-expressed blue fluorescent reporter to enable use of both red and green channels in experiments. These transgenes are inserted into commonly used, well-characterized genetic loci. We confirmed that our TIR1-expressing strains produce the expected depletion phenotype for several nuclear and cytoplasmic AID-tagged endogenous substrates. We have also constructed a set of plasmids for constructing repair templates to generate fluorescent protein::AID fusions through CRISPR/Cas9-mediated genome editing. These plasmids are compatible with commonly used genome editing approaches in the C. elegans community (Gibson or SapTrap assembly of plasmid repair templates or PCR-derived linear repair templates). Together these reagents will complement existing TIR1 strains and facilitate rapid and high-throughput fluorescent protein::AID tagging of genes. This battery of new TIR1-expressing strains and modular, efficient cloning vectors serves as a platform for straightforward assembly of CRISPR/Cas9 repair templates for conditional protein depletion.

Molecular Biology Methods to Construct Recombinant Fibrous Protein.

Recombinant technologies are often used to synthesize fibrous proteins that are difficult to separate and extract in nature, such as spider silks and elastin. Although the recombination techniques can be diverse, PCR, gel electrophoresis, and seamless cloning, as the basic methods of molecular biology, have been widely used for constructing fibrous proteins' homologous recombinant plasmids. Considering that some readers of this book may not have a molecular biology background, in this chapter, we will introduce these three most used and effective recombination techniques. For PCR, we primarily introduce colony PCR, high-fidelity PCR, and overlap PCR, which are three kinds of the most used methods. In terms of seamless cloning, the detailed protocols of Gibson Assembly and Golden Gate Assembly are introduced. The introduction of this chapter is expected to provide a comprehensive methodological reference for the following chapters to introduce the recombination of specific fibroin proteins.

Home-made enzymatic premix and Illumina sequencing allow for one-step Gibson assembly and verification of virus infectious clones

An unprecedented number of viruses have been discovered by leveraging advances in high-throughput sequencing. Infectious clone technology is a universal approach that facilitates the study of biology and role in disease of viruses. In recent years homology-based cloning methods such as Gibson assembly have been used to generate virus infectious clones. We detail herein the preparation of home-made cloning materials for Gibson assembly. The home-made materials were used in one-step generation of the infectious cDNA clone of a plant RNA virus into a T-DNA binary vector. The clone was verified by a single Illumina reaction and a de novo read assembly approach that required no primer walking, custom primers or reference sequences. Clone infectivity was finally confirmed by Agrobacterium-mediated delivery to host plants. We anticipate that the convenient home-made materials, one-step cloning and Illumina verification strategies described herein will accelerate characterization of viruses and their role in disease development.

Targeted Disruption of Scytalone Dehydratase Gene Using Agrobacterium tumefaciens-Mediated Transformation Leads to Altered Melanin Production in Ascochyta lentis.

Sustainable crop production is constantly challenged by the rapid evolution of fungal pathogens equipped with an array of host infection strategies and survival mechanisms. One of the devastating fungal pathogens that infect lentil is the ascomycete Ascochyta lentis which causes black spot or ascochyta blight (AB) on all above ground parts of the plant. In order to explore the mechanisms involved in the pathogenicity of A. lentis, we developed a targeted gene replacement method using Agrobacterium tumefaciens mediated transformation (ATMT) to study and characterize gene function. In this study, we investigated the role of scytalone dehydratase (SCD) in the synthesis of 1,8-dihydroxynaphthalene (DHN)-melanin in AlKewell. Two SCD genes have been identified in AlKewell, AlSCD1 and AlSCD2. Phylogenetic analysis revealed that AlSCD1 clustered with the previously characterized fungal SCDs; thus, AlSCD1 was disrupted using the targeted gene replacement vector, pTAR-hyg-SCD1. The vector was constructed in a single step process using Gibson Assembly, which facilitated an easy and seamless assembly of multiple inserts. The resulting AlKewell scd1::hyg transformants appeared light brown/brownish-pink in contrast to the dark brown pycnidia of the WT strain and ectopic transformant, indicating an altered DHN-melanin production. Disruption of AlSCD1 gene did not result in a change in the virulence profile of AlKewell towards susceptible and resistant lentil varieties. This is the first report of a targeted gene manipulation in A. lentis which serves as a foundation for the functional gene characterization to provide a better understanding of molecular mechanisms involved in pathogen diversity and host specificity.