Gibson Assembly Research Articles

Rapid parallel reconstruction and specificity screening of hundreds of T cell receptors.

The ability to screen the reactivity of T cell receptors (TCRs) is essential to understanding how antigen-specific T cells drive productive or dysfunctional immune responses during infections, cancer and autoimmune diseases. Methods to profile large numbers of TCRs are critical for characterizing immune responses sustained by diverse T cell clones. Here we provide a medium-throughput approach to reconstruct dozens to hundreds of TCRs in parallel, which can be simultaneously screened against primary human tissues and broad curated panels of antigenic targets. Using Gibson assembly and miniaturized lentiviral transduction, individual TCRs are rapidly cloned and expressed in T cells; before screening, TCR cell lines undergo combinatorial labeling with dilutions of three fluorescent dyes, which allows retrieval of the identity of individual T cell effectors when they are organized and tested in pools using flow cytometry. Upon incubation with target cells, we measure the upregulation of CD137 on T cells as a readout of TCR activation. This approach is scalable and simultaneously captures the reactivity of pooled TCR cell lines, whose activation can be deconvoluted in real time, thus providing a path for screening the reactivity of dozens of TCRs against broad panels of synthetic antigens or against cellular targets, such as human tumor cells. We applied this pipeline to systematically deconvolute the antitumoral and antiviral reactivity and antigenic specificity of TCRs from human tumor-infiltrating lymphocytes. This protocol takes ~2 months, from experimental design to data analysis, and requires standard expertise in cloning, cell culture and flow cytometry.

Design and construction of a GAP-43 reporter system for potential identification of effective therapeutics for peripheral nerve regeneration

Background: Peripheral nerve injury (PNI) is a condition that can result in muscle paralysis and sensory disturbances. Electrical stimulation and/or the application of exogenous neurotrophic factors and cytokines are effective at enhancing nerve regeneration and is mediated via the expression of regeneration associated genes (RAGs) such as the growth associated protein GAP-43. Therapeutic upregulation of GAP-43 has potential use as a treatment for improving recovery from PNI. Few studies have investigated the potential of increasing GAP-43 for PNI therapeutic purposes and current methods for measuring GAP-43 expression are limited. Aims and Objectives: The broader aim of this work was to construct a motor neuron-like cell model with a GAP-43 reporter system. Such a model would have potential use in screening for novel therapeutics that upregulate GAP-43 and in the optimisation of electrical stimulation treatment in combination with these therapies. The key aim of the work was to design and construct a Cas9 expressing plasmid bearing a gRNA that targets GAP-43 cleavage and a donor plasmid bearing a reporter GFP or Neo cassette flanked with 5’ and 3’ GAP-43 homology arms (HAs) to facilitate the insertion of the reporter immediately 3’ of the GAP-43 promoter via CRISPR/Cas9 homology directed repair (HDR). Such an insertion would enable quantitative measurement of endogenous expression of the GAP-43 gene. Methods and Results: To guide the Cas9 nuclease to the target location, GAP-43 gRNA oligomers were designed and cloned downstream of the U6 promoter in the Cas9 expression plasmid px330, which also expresses the Cas9 gene and the cloned gRNA when transfected into cells. For CRISPR/Cas9 HDR, the 5’ and 3’ GAP-43 HAs were amplified from mouse genomic DNA and cloned into the donor plasmid using Gibson Assembly so that they flanked the reporter cassette. Results: This work successfully constructed the Cas9 gRNA expressing plasmid to target cleavage of the GAP-43 gene in mouse cell lines and has provided the complete design and construction foundation for generation of the reporter system for the endogenous GAP-43 gene in mice.

A CRISPR-Cas9-Mediated Large-Fragment Assembly Method for Cloning Genomes and Biosynthetic Gene Cluster.

The ability to clone large DNA fragments from genomes is valuable for both basic and applied research, such as the construction of synthetic genomes, and the expression of biosynthetic gene clusters (BGCs) for natural product discovery. Here, we report a fast and efficient platform for the direct capture of genome DNAs, by combining CRISPR and Gibson assembly. We demonstrate this method with the ability of cloning large DNA fragments ranging from 30 to 77 kb from various host genomes, achieving a near 100% cloning fidelity for DNA fragments below 50 kb. We next demonstrate this method by the cloning of a 40 kb fragment from Streptomyces ceruleus A3(2), which is rich in BGCs for natural products; and used this method cloning the 40 kb fengycin synthetic gene cluster from B. subtilis 168, encoding for a class of peptides with bioactivity. This method provides efficient and simple opportunities for assembling large DNA constructs from distant sources.

DNA assembly by multi-fragment digestion/ligation and homologous recombination

To develop an accurate and efficient protocol for multi-fragment assembly and multi-site mutagenesis, we integrated and optimized the common multi-fragment assembly methods and validated the established method by using fructose-1,6-diphosphatase 1 (FBP1) with 4 mutant sites. The fragments containing mutations were assembled by introducing mutant sites and Bsa I recognition sequences. After digestion/ligation, the ligated fragment was amplified with the primers containing overlap region to the linearized vector. The amplified fragment was ligated to the linearized vector and the ligation product was transformed into Escherichia coli. After screening and sequencing, the recombinant plasmid with 4 mutant sites was obtained. This protocol overcame the major defects of Gibson assembly and Golden Gate assembly, serving as an efficient solution for multi-fragment assembly and multi-site mutagenesis.

A Seamless Cloning Approach for Porcine Reproductive and Respiratory Syndrome Virus Expression Vector Construction.

The construction of gene expression vectors is an important component of laboratory work in experimental biology. With technical advancements like Gibson Assembly, vector construction becomes relatively simple and efficient. However, when the full-length genome of Porcine Reproductive and Respiratory Syndrome Virus (PRRSV) cannot be easily amplified by a single polymerase chain reaction (PCR) from cDNA, or it is difficult to acquire a full-length gene expression vector by homologous recombination of multiple inserts in vitro, the current Gibson Assembly technique fails to achieve this goal. Consequently, we aimed to divide the PRRSV genome into several fragments and introduce appropriate restriction sites into the reverse primer for obtaining PCR-amplified fragments. After joining the previous DNA fragment into the vector by homologous recombination technology, the new vector acquired the restriction enzyme cleavage site. Thus, we can linearize the vector by using the newly added enzyme cleavage site and introduce the next DNA fragment downstream of the upstream DNA fragment. The introduced restriction enzyme cleavage site at the 3' end of the upstream DNA fragment will be eliminated, and a new cleavage site will be introduced into the 3' end of the downstream DNA fragment. In this way, we can join DNA fragments to the vector one by one. This method is applicable to successfully construct the PRRSV expression vector and is an effective method for assembling a large number of fragments into the expression vector.

Expression and purification of an NP-hoc fusion protein: Utilizing influenza a nucleoprotein and phage T4 hoc protein

Influenza poses a substantial health risk, with infants and the elderly being particularly susceptible to its grave impacts. The primary challenge lies in its rapid genetic evolution, leading to the emergence of new Influenza A strains annually. These changes involve punctual mutations predominantly affecting the two main glycoproteins: Hemagglutinin (HA) and Neuraminidase (NA). Our existing vaccines target these proteins, providing short-term protection, but fall short when unexpected pandemics strike. Delving deeper into Influenza's genetic makeup, we spotlight the nucleoprotein (NP) - a key player in the transcription, replication, and packaging of RNA. An intriguing characteristic of the NP is that it is highly conserved across all Influenza A variants, potentially paving the way for a more versatile and broadly protective vaccine. We designed and synthesized a novel NP-Hoc fusion protein combining Influenza A nucleoprotein and T4 phage Hoc, cloned using Gibson assembly in E. coli, and purified via ion affinity chromatography. Simultaneously, we explore the T4 coat protein Hoc, typically regarded as inconsequential in controlled viral replication. Yet, it possesses a unique ability: it can link with another protein, showcasing it on the T4 phage coat. Fusing these concepts, our study designs, expresses, and purifies a novel fusion protein named NP-Hoc. We propose this protein as the basis for a new generation of vaccines, engineered to guard broadly against Influenza A. The excitement lies not just in the immediate application, but the promise this holds for future pandemic resilience, with NP-Hoc marking a significant leap in adaptive, broad-spectrum influenza prevention.

Efficient DNA-based data storage using shortmer combinatorial encoding

Data storage in DNA has recently emerged as a promising archival solution, offering space-efficient and long-lasting digital storage solutions. Recent studies suggest leveraging the inherent redundancy of synthesis and sequencing technologies by using composite DNA alphabets. A major challenge of this approach involves the noisy inference process, obstructing large composite alphabets. This paper introduces a novel approach for DNA-based data storage, offering, in some implementations, a 6.5-fold increase in logical density over standard DNA-based storage systems, with near-zero reconstruction error. Combinatorial DNA encoding uses a set of clearly distinguishable DNA shortmers to construct large combinatorial alphabets, where each letter consists of a subset of shortmers. We formally define various combinatorial encoding schemes and investigate their theoretical properties. These include information density and reconstruction probabilities, as well as required synthesis and sequencing multiplicities. We then propose an end-to-end design for a combinatorial DNA-based data storage system, including encoding schemes, two-dimensional (2D) error correction codes, and reconstruction algorithms, under different error regimes. We performed simulations and show, for example, that the use of 2D Reed-Solomon error correction has significantly improved reconstruction rates. We validated our approach by constructing two combinatorial sequences using Gibson assembly, imitating a 4-cycle combinatorial synthesis process. We confirmed the successful reconstruction, and established the robustness of our approach for different error types. Subsampling experiments supported the important role of sampling rate and its effect on the overall performance. Our work demonstrates the potential of combinatorial shortmer encoding for DNA-based data storage and describes some theoretical research questions and technical challenges. Combining combinatorial principles with error-correcting strategies, and investing in the development of DNA synthesis technologies that efficiently support combinatorial synthesis, can pave the way to efficient, error-resilient DNA-based storage solutions.

Rainbow screening: Chromoproteins enable visualized molecular cloning.

Molecular cloning facilitates the assembly of heterologous DNA fragments with vectors, resulting in the generation of plasmids that can steadily replicate in host cells. To efficiently and accurately screen out the expected plasmid candidates, various methods, such as blue-white screening, have been developed for visualization. However, these methods typically require additional genetic manipulations and costs. To simplify the process of visualized molecular cloning, here we report Rainbow Screening, a method that combines Gibson Assembly with chromoproteins to distinguish Escherichia coli (E. coli) colonies by naked eyes, eliminating the need for additional genetic manipulations or costs. To illustrate the design, we select both E. coli 16s rRNA and sfGFP expression module as two inserted fragments. Using Rainbow Screening, false positive colonies can be easily distinguished on LB-agar plates. Moreover, both the assembly efficiency and the construct accuracy can exceed 80%. We anticipate that Rainbow Screening will enrich the molecular cloning methodology and expand the application of chromoproteins in biotechnology and synthetic biology.

Abstract 5783: Receptor tyrosine kinase Tyro3 interaction with ligands and inhibitors

Abstract TAM receptors (Tyro3, Axl, Mer) are a sub-family of receptor tyrosine kinases that regulate cell survival and homeostasis primarily through their role in clearance of apoptotic cells. While several receptor tyrosine kinases (RTKs) are targeted in various types of cancer therapies, interest in Tyro3 as a potential target in breast cancers has only recently grown. Determining the structure of Tyro3 with and without tyrosine kinase inhibitors (TKIs) bound will provide important missing information to aid in the design of treatments that can be combined with existing cancer treatments, as dual treatment is often necessary. I have designed constructs that will be used for crystallization of the Tyro3 kinase domains. I mapped the full portion of the kinase (called "Small"), an extended kinase ("Big"), and a smaller catalytic domain ("Cat"). The kinases were made through a molecular cloning method (Gibson Assembly), sequence verified, and expressed in insect cells for large scale purification. Ni-NTA and gel filtration will be used, followed by crystallization and soaking with inhibitors. Citation Format: Keisha Nicole Hardeman, Chrystal Starbird. Receptor tyrosine kinase Tyro3 interaction with ligands and inhibitors [abstract]. In: Proceedings of the American Association for Cancer Research Annual Meeting 2024; Part 1 (Regular Abstracts); 2024 Apr 5-10; San Diego, CA. Philadelphia (PA): AACR; Cancer Res 2024;84(6_Suppl):Abstract nr 5783.

Combining CRISPR-Cas-mediated terminal resolution with a novel genetic workflow to achieve high-diversity adenoviral libraries

While recombinant adenoviruses (rAds) are widely used in both laboratory and medical gene transfer, library-based applications using this vector platform are not readily available. Recently, we developed a new method, the CRISPR-Cas9 mediated invivo terminal resolution aiding high-efficiency rescue of rAds from recombinant DNA. Here we report on a genetic workflow that allows construction of bacterial artificial chromosome-based rAd libraries reconstituted using highly efficient terminal resolution. We utilized frequent, pre-existing genomic sequences to allow the insertion of a selection marker, complementing two selected target sites into novel endonuclease recognition sites. In the second step, this selection marker is replaced with a transgene or mutation of interest via Gibson assembly. Our approach does not cause unwanted genomic off-target mutations while providing substantial flexibility for the site and nature of the genetic modification. This new genetic workflow, which we termed half site-directed fragment replacement (HFR) allows the introduction of more than 106 unique modifications into rAd encoding BACs using laboratory scale methodology. To demonstrate the power of HFR, we rescued barcoded viral vector libraries yielding a diversity of approximately 2.5×104 unique rAds per cm2 of transfected cell culture.

Nanopore sequencing improves construction of customized CRISPR-based gene activation libraries.

Clustered regularly interspaced short palindromic repeats (CRISPR)-based screening has emerged as a powerful tool for identifying new gene targets for desired cellular phenotypes. The construction of guide RNA (gRNA) pools largely determines library quality and is usually performed using Golden Gate assembly or Gibson assembly. To date, library construction methods have not been systematically compared, and the quality check of each batch has been slow. In this study, an in-house nanopore sequencing workflow was established for assessing the current methods of gRNA pool construction. The bias of pool construction was reduced by employing the polymerase-mediated non-amplifying method. Then, a small gRNA pool was utilized to characterize stronger activation domains, specifically MED2 (a subunit of mediator complex) and HAP4 (a heme activator protein), as well as to identify better gRNA choices for dCas12a-based gene activation in Saccharomyces cerevisiae. Furthermore, based on the better CRISPRa tool identified in this study, a custom gRNA pool, which consisted of 99 gRNAs targeting central metabolic pathways, was designed and employed to screen for gene targets that could improve ethanol utilization in S. cerevisiae. The nanopore sequencing-based workflow demonstrated here should provide a cost-effective approach for assessing the quality of customized gRNA library, leading to faster and more efficient genetic and metabolic engineering in S. cerevisiae.

Specific antibody production using recombinant proteins to elucidate seed transmission and nuclear localization of Coguvirus citrulli and Coguvirus henanense in radicles of watermelon crop

Watermelon crinkle leaf-associated virus 1 (WCLaV-1) and WCLaV-2, both belonging to the genus Coguvirus (family Phenuiviridae), have been identified in watermelon plants in Brazil. To study tissue tropism and the potential for seed transmission of these viruses, we initially planned to produce specific antibodies. However, difficulties in isolating and propagating the virus in host plants hindered the purified virus preparations. To overcome this problem, the nucleocapsid (N) proteins of WCLaV-1 and −2 were produced using the pepper ringspot virus vector. The N protein genes and the vector backbone were prepared by (RT-)PCR and ligated by Gibson assembly. The constructs were agro-infiltrated in Nicotiana benthamiana plants. The expressed N proteins were purified and used for polyclonal antibody production. The specificity of both antibodies was confirmed by antigen-coating ELISA, tissue-blot immunobinding assay and Western blot. By antigen-coating ELISA demonstrated that WCLaV-1 showed 93.1% of seed-transmission, while WCLaV-2 showed only 17.8%. The N protein of WCLaV-1 was detected in the cytoplasm of the seed tissues. It was also found in the nuclei of the radicle, as confirmed by confocal microscopy. We concluded that the antibodies exhibited both a high titer and sufficient specificity for use in ELISA-based diagnostics and for subcellular localization study.

Construction and validation of co-expression vector for rice alpha tubulin and microtubule associated protein respectively fused with fluorescent proteins.

Microtubule (MT) consists of α-tubulin and β-tubulin. The dynamic instability regulated by various microtubule associated proteins (MAPs) is essential for MT functions. To analyze the interaction between tubulin/MT and MAP in vivo, we usually need tubulin and MAP co-expressed. Here, we constructed a dual-transgene vector expressing rice (Oryza sativa) α-tubulin and MAP simultaneously. To construct this vector, plant expression vector pCambia1301 was used as the plasmid backbone and Gibson assembly cloning technology was used. We first fused and cloned the GFP fragment, α-tubulin open reading frame (ORF), and NOS terminator into the vector pCambia1301 to construct the p35S::GFP-α-tubulin vector that expressed GFP-α-tubulin fusion protein. Subsequently, we fused and cloned the CaMV 35S promoter, mCherry fragment, and NOS terminator into the p35S::GFP-α-tubulin vector to generate the universal dual-transgene expression vector (p35S::GFP-α-tubulin-p35S::mCherry vector). With the p35S::GFP-α-tubulin-p35S::mCherry vector, MAP ORF can be cloned into the site of 5' or 3' terminus of mCherry to co-express GFP-α-tubulin and MAP-mCherry/mCherry-MAP. To validate the availability and universality of the dual-transgene expression vector, a series of putative rice MAP genes including GL7, OsKCBP, OsCLASP, and OsMOR1 were cloned into the vector respectively, transformed into Agrobacterium tumefaciens strain, and expressed in Nicotiana benthamiana leaves. The results indicated that all of the MAPs were co-expressed with α-tubulin and localized to MTs, validating the availability and universality of the vector and that GL7, OsKCBP, OsCLASP, and OsMOR1 might be MAPs. The application of the co-expression vector constructed by us would facilitate studies on the interaction between tubulin/MT and MAP in tobacco transient expression systems or transgenic rice.

Long oligodeoxynucleotides: chemical synthesis, isolation via catching-by-polymerization, verification via sequencing, and gene expression demonstration.

Long oligodeoxynucleotides (ODNs) are segments of DNAs having over one hundred nucleotides (nt). They are typically assembled using enzymatic methods such as PCR and ligation from shorter 20 to 60 nt ODNs produced by automated de novo chemical synthesis. While these methods have made many projects in areas such as synthetic biology and protein engineering possible, they have various drawbacks. For example, they cannot produce genes and genomes with long repeats and have difficulty to produce sequences containing stable secondary structures. Here, we report a direct de novo chemical synthesis of 400 nt ODNs, and their isolation from the complex reaction mixture using the catching-by-polymerization (CBP) method. To determine the authenticity of the ODNs, 399 and 401 nt ODNs were synthesized and purified with CBP. The two were joined together using Gibson assembly to give the 800 nt green fluorescent protein (GFP) gene construct. The sequence of the construct was verified via Sanger sequencing. To demonstrate the potential use of the long ODN synthesis method, the GFP gene was expressed in E. coli. The long ODN synthesis and isolation method presented here provides a pathway to the production of genes and genomes containing long repeats or stable secondary structures that cannot be produced or are highly challenging to produce using existing technologies.

Construction of Geminivirus Infectious Clones for Agroinoculation into Plants.

The production of geminiviral infectious clones providesa standardized inoculum for use in several host-virus studies. Geminiviruses present either one (monopartite) or two (bipartite) circular single-stranded DNA components, which commonly range from 2.6 to 2.8kb. Cloning of a monomeric genome is useful for obtaining its precise sequence. For infectious clones, however, it is essential that more than one copy of the genome, more specificallyof the origin of replication, is present in order to guarantee the production of full-length progeny DNA. Here, the complete process of preparing infectious geminiviral clones is described starting from the DNA extraction and selection of restriction endonucleases followed by two protocols for constructing dimeric clones: restriction endonuclease digestion and ligation (1) and Gibson Assembly (2).

Pyramiding stacking of multigenes (PSM): a simple, flexible and efficient multigene stacking system based on Gibson assembly and gateway cloning.

Genetic engineering of complex metabolic pathways and multiple traits often requires the introduction of multiple genes. The construction of plasmids carrying multiple DNA fragments plays a vital role in these processes. In this study, the Gibson assembly and Gateway cloning combined Pyramiding Stacking of Multigenes (PSM) system was developed to assemble multiple transgenes into a single T-DNA. Combining the advantages of Gibson assembly and Gateway cloning, the PSM system uses an inverted pyramid stacking route and allows fast, flexible and efficient stacking of multiple genes into a binary vector. The PSM system contains two modular designed entry vectors (each containing two different attL sites and two selectable markers) and one Gateway-compatible destination vector (containing four attR sites and two negative selection markers). The target genes are primarily assembled into the entry vectors via two parallel rounds of Gibson assembly reactions. Then, the cargos in the entry constructs are integrated into the destination vector via a single tube Gateway LR reaction. To demonstrate PSM's capabilities, four and nine gene expression cassettes were respectively assembled into the destination vector to generate two binary expression vectors. The transgenic analysis of these constructs in Arabidopsis demonstrated the reliability of the constructs generated by PSM. Due to its flexibility, simplicity and versatility, PSM has great potential for genetic engineering, synthetic biology and the improvement of multiple traits.

Sterically Enhanced Control of Enzyme-Assisted DNA Assembly.

Traditional methods for the assembly of functionalised DNA structures, involving enzyme restriction and modification, present difficulties when working with small DNA fragments (<100 bp), in part due to a lack of control over enzymatic action during the DNA modification process. This limits the design flexibility and range of accessible DNA structures. Here, we show that these limitations can be overcome by introducing chemical modifications into the DNA that spatially restrict enzymatic activity. This approach, sterically controlled nuclease enhanced (SCoNE) DNA assembly, thereby circumvents the size limitations of conventional Gibson assembly (GA) and allows the preparation of well-defined, functionalised DNA structures with multiple probes for specific analytes, such as IL-6, procalcitonin (PCT), and a biotin reporter group. Notably, when using the same starting materials, conventional GA under typical conditions fails. We demonstrate successful analyte capture based on standard and modified sandwich ELISA and also show how the inclusion of biotin probes provides additional functionality for product isolation.

Production of a chimeric flavivirus that contains the major structural glycoprotein genes of T’Ho virus in the genetic background of Zika virus

T’Ho virus is a poorly characterized orthoflavivirus most closely related to Rocio virus and Ilheus virus, two orthoflaviviruses associated with human disease, suggesting that T’Ho virus could also be a human pathogen. The genome of T’Ho virus has been sequenced but an isolate has never been recovered, impeding its phenotypic characterization. In an attempt to generate recombinant T’Ho virus, the entire viral genome was synthesized as three overlapping DNA fragments, joined by Gibson assembly, and transfected into mosquito cells. Several cell culture passages were performed, but virus was not recovered. Subsequent experiments focused on the development of a chimeric orthoflavivirus that contains the premembrane and envelope protein genes of T’Ho virus in the genetic background of Zika virus. The chimeric virus replicated in mosquito (C6/36) and vertebrate (Vero) cells, demonstrating that the major structural glycoproteins of T’Ho virus permit entry into both cell types. The chimeric virus produced plaques in Vero cells that were significantly smaller than those produced by Zika virus. The chimeric virus can potentially be used as a surrogate diagnostic reagent in place of T’Ho virus in plaque reduction neutralization tests, allowing T’Ho virus to be considered in the differential diagnosis.

Unigems: plasmids and parts to facilitate teaching on assembly, gene expression control and logic in E. coli.

Synthetic biology enables the creative combination of engineering and molecular biology for exploration of fundamental aspects of biological phenomena. However, there are limited resources available for such applications in the educational context, where straightforward setup, easily measurable phenotypes and extensibility are of particular importance. We developed unigems, a set of ten plasmids that enable classroom-based investigation of gene-expression control and biological logic gates to facilitate teaching synthetic biology and genetic engineering. It is built on a high-copy plasmid backbone and is easily extensible thanks to a common primer set that facilitates Gibson assembly of PCR-generated or synthesized DNA parts into the target vector. It includes two reporter genes with either two constitutive (high- or low-level) or two inducible (lactose- or arabinose-) promoters, as well as a single-plasmid implementation of an AND logic gate. The set can readily be employed in undergraduate teaching settings, during outreach events and for training of iGEM teams. All plasmids have been deposited in Addgene.

A human papillomavirus whole genome plasmid repository: A resource for HPV DNA quality control reagents.

Well characterized reference reagents are useful for assay validation, proficiency/competency assessment, daily run controls, and to improve inter-laboratory comparisons. Synthetic human papillomavirus (HPV) DNA fragments and plasmid clones are available, but synthetic fragments include limited segments of the HPV genome and many HPV plasmids have interrupted coding regions or contain partial genomes. As a result, they are not compatible with all HPV DNA detection and typing assays. To address this need, we are establishing an HPV plasmid repository of HPV clones containing the whole genome of each type with no interruptions in coding regions. To date, HPV plasmid clones for 16 HPV types, (including all vaccine types and 14 types in clinical assays: HPV6, 11, 16, 18, 31, 33, 35, 39, 45, 51, 52, 56, 58, 59, 66 and 68) have been constructed using a Gibson assembly method and validated by sequencing and the Novaplex HPV typing assay. The newly constructed HPV whole genome plasmids can serve as a quality control reagent resource for HPV DNA assays and are available for public health and research laboratories.