GH11 Xylanase Research Articles

In vitro degradation of non-starch polysaccharide residues in the digesta of broilers offered wheat-soy or maize-soy diets by feed enzymes

The present study evaluated the in vitro efficacy of different feed enzymes on degrading non-starch polysaccharide (NSP) residues present in digesta collected from broilers’ gastrointestinal tract. Two dietary treatments, wheat-soy or maize-soy based diets, were assigned to broilers (12 replicates per treatment; 10 birds per replicate pen) from d 0 to 35. At 35 d of age, digesta was collected from the gizzard, jejunum and ileum from three birds per replicate and pooled. The digesta samples were digested in vitro with one of nine enzymes; GH10, GH11 and GH8 xylanase, arabinofuranosidase, a combination of GH10 xylanase and β-glucanase (XYN+BG), β-mannanase, protease, cellulase cocktail and pectate lyase. When using the gizzard digesta as substrate, GH8 xylanase reduced (P<0.005) both insoluble and soluble NSP levels compared to the control, regardless of diet type. Analysis of NSP degradation in jejunal digesta from birds fed the wheat-soy diet revealed that the three xylanases and arabinofuranosidase reduced (P<0.001) insoluble NSP level compared to the control, but the soluble NSP level was not affected by the enzyme treatments. All enzymes, except the cellulase cocktail and pectate lyase, reduced (P=0.005) the insoluble NSP level in the jejunal digesta collected from birds fed the maize-soy diet. Similarly, all enzyme preparations reduced (P<0.001) the insoluble NSP level in ileal digesta obtained from birds fed the maize-soy diet. The GH10 and GH11 xylanase, XYN+BG, cellulase cocktail and pectate lyase reduced (P<0.001) the insoluble NSP level in the ileal digesta from birds fed the wheat-soy diet compared to the control, with XYN+BG exhibiting the greatest reduction. Collectively, the present in vitro study indicated that the in vitro efficacy of enzyme preparations was dictated by the amount and type of NSP remaining undigested in various parts of the gut, which perhaps affect the in vivo efficacy.

Xylanase production by Thermobacillus xylanilyticus is impaired by population diversification but can be mitigated based on the management of cheating behavior

BackgroundThe microbial production of hemicellulasic cocktails is still a challenge for the biorefineries sector and agro-waste valorization. In this work, the production of hemicellulolytic enzymes by Thermobacillus xylanilyticus has been considered. This microorganism is of interest since it is able to produce an original set of thermostable hemicellulolytic enzymes, notably a xylanase GH11, Tx-xyn11. However, cell-to-cell heterogeneity impairs the production capability of the whole microbial population.ResultsSequential cultivations of the strain on xylan as a carbon source has been considered in order to highlight and better understand this cell-to-cell heterogeneity. Successive cultivations pointed out a fast decrease of xylanase activity (loss of ~ 75%) and Tx-xyn11 gene expression after 23.5 generations. During serial cultivations on xylan, flow cytometry analyses pointed out that two subpopulations, differing at their light-scattering properties, were present. An increase of the recurrence of the subpopulation exhibiting low forward scatter (FSC) signal was correlated with a progressive loss of xylanase activity over several generations. Cell sorting and direct observation of the sorted subpopulations revealed that the low-FSC subpopulation was not sporulating, whereas the high-FSC subpopulation contained cells at the onset of the sporulation stage. The subpopulation differences (growth and xylanase activity) were assessed during independent growth. The low-FSC subpopulation exhibited a lag phase of 10 h of cultivation (and xylanase activities from 0.15 ± 0.21 to 3.89 ± 0.14 IU/mL along the cultivation) and the high-FSC subpopulation exhibited a lag phase of 5 h (and xylanase activities from 0.52 ± 0.00 to 4.43 ± 0.61 over subcultivations). Serial cultivations on glucose, followed by a switch to xylan led to a ~ 1.5-fold to ~ 15-fold improvement of xylanase activity, suggesting that alternating cultivation conditions could lead to an efficient population management strategy for the production of xylanase.ConclusionsTaken altogether, the data from this study point out that a cheating behavior is responsible for the progressive reduction in xylanase activity during serial cultivations of T. xylanilyticus. Alternating cultivation conditions between glucose and xylan could be used as an efficient strategy for promoting population stability and higher enzymatic productivity from this bacterium.

High-temperature behavior of hyperthermostable Thermotoga maritima xylanase XYN10B after designed and evolved mutations.

A hyperthermostable xylanase XYN10B from Thermotoga maritima (PDB code 1VBR, GenBank accession number KR078269) was subjected to site-directed and error-prone PCR mutagenesis. From the selected five mutants, the two site-directed mutants (F806H and F806V) showed a 3.3-3.5-fold improved enzyme half-life at 100 °C. The mutant XYNA generated by error-prone PCR showed slightly improved stability at 100 °C and a lower Km. In XYNB and XYNC, the additional mutations over XYNA decreased the thermostability and temperature optimum, while elevating the Km. In XYNC, two large side-chains were introduced into the protein's interior. Micro-differential scanning calorimetry (DSC) showed that the melting temperature (Tm) dropped in XYNB and XYNC from 104.9 °C to 93.7 °C and 78.6 °C, respectively. The detrimental mutations showed that extremely thermostable enzymes can tolerate quite radical mutations in the protein's interior and still retain high thermostability. The analysis of mutations (F806H and F806V) in a hydrophobic area lining the substrate-binding region indicated that active site hydrophobicity is important for high activity at extreme temperatures. Although polar His at 806 provided higher stability, the hydrophobic Phe at 806 provided higher activity than His. This study generates an understanding of how extreme thermostability and high activity are formed in GH10 xylanases. KEY POINTS: • Characterization and molecular dynamics simulations of TmXYN10B and its mutants • Explanation of structural stability of GH10 xylanase.

Cloning and expression of a GH11 xylanase from Bacillus pumilus SSP-34 in Pichia pastoris GS115: Purification and characterization

Expression analysis of recombinant Vigna radiata plant defensin 1 protein in transgenic tobacco plantsHoang Thi Thao , Nguyen Thi Ngoc Lan, Ho Manh Tuong, Nguyen Vu Thanh Thanh, Le Van Son, Chu Hoang Mau

Application of a recombinant GH10 endoxylanase from Thermoascus aurantiacus for xylooligosaccharide production from sugarcane bagasse and probiotic bacterial growth

Xylooligosaccharides (XOs) are a promising class of prebiotics capable of selectively stimulating the growth of the beneficial intestinal microbiota against intestinal pathogens. They can be obtained from xylan present in residual lignocellulosic material from agriculture. Thus, in this study we produced XOs by extracting xylan from sugarcane bagasse and hydrolyzing it using the GH10 xylanase from Thermoascus aurantiacus expressed by Pichia pastoris. An alkaline method to extract xylan is described, which resulted in 83.40% of xylan recovery and low amounts of cellulose and lignin. The enzymatic hydrolysate exhibited a mixture of XOs containing mainly xylobiose, xylotriose and xylotetraose. These oligosaccharides stimulated the growth of Lactobacillus casei, L. rhamnosus, L. fermentum and L. bulgaricus strains, which were able to produce organic acids, especially acetic acid. These findings demonstrate the possibility to redirect crop by-products to produce XOs and their use as a supplement to stimulate the growth of probiotic strains.

Sensitivity of family GH11 Bacillus amyloliquefaciens xylanase A (BaxA) and the T33I mutant to Oryza sativa xylanase inhibitor protein (OsXIP): An experimental and computational study

Glycoside hydrolase (GH) family 10 and 11 xylanases are inhibited by many xylanase inhibitor proteins (XIPs). We recombinantly expressed the Oryza sativa xylanase inhibitor protein (OsXIP) in Pichia pastoris GS115, with a molecular mass of 47.0 kDa. Family GH11 Bacillus amyloliquefaciens xylanase A (BaxA) and the mutant T33I (DS199) were inhibited by the recombinant OsXIP (rePOsXIP) through competive inhibition, with corresponding inhibition constants (Ki) of 54.09 and 12.16 nM. After incubation with rePOsXIP (70 nM) at 40 °C for 40 min, inhibitory rates of reBaxA and DS199 (0.2 U) were 23.7% and 76.7%, respectively. Xylooligosaccharides with low concentration were released from beechwood xylan by reBaxA and DS199 in the presence of reOsXIP. Intrinsic fluorescences of reBaxA and DS199 were statically quenched by rePOsXIP in a concentration-dependent manner. Molecular dynamics (MD) simulations and conformational analysis of OsXIP-BaxA and OsXIP-DS199 revealed that the long loop (Lα4β5) of OsXIP inserted into the catalytic grooves of BaxA and DS199. The DS199 enhanced the binding affinity to OsXIP, causing conformational alterations on protein-protein interface residues, thereby forming more hydrogen bonds and van der Waals forces. MM/GBSA analysis revealed that the binding free energy (∆Gbind) of OsXIP-DS199 was enhanced by 2.08 kcal/mol compared to that of OsXIP-BaxA. The OsXIP binding induced a conformational changes among residues in the cord and thumb regions of BaxA and DS199. In particular, the T111RYNAP116 residues in the thumb region of DS199 was maintained close to OsXIP by specific bonds. Additional MD simulations revealed that Y113A or T93A mutation of BaxA suppressed the binding affinity by diminishing interface associations of OsXIP-BaxA. This study partially elucidats the molecular basis of inhibitory mechanism and structure-function relationships of GH11 xylanases. Our findings inform rational designs of mutant xylanases with higher resistance to inhibitor proteins.

Yeast GH30 Xylanase from Sugiyamaella lignohabitans Is a Glucuronoxylanase with Auxiliary Xylobiohydrolase Activity.

Xylanases are the enzymes that catalyze the breakdown of the main hemicellulose present in plant cell walls. They have attracted attention due to their biotechnological potential for the preparation of industrially interesting products from lignocellulose. While many xylanases have been characterized from bacteria and filamentous fungi, information on yeast xylanases is scarce and no yeast xylanase belonging to glycoside hydrolase (GH) family 30 has been described so far. Here, we cloned, expressed and characterized GH30 xylanase SlXyn30A from the yeast Sugiyamaella lignohabitans. The enzyme is active on glucuronoxylan (8.4 U/mg) and rhodymenan (linear β-1,4-1,3-xylan) (3.1 U/mg) while its activity on arabinoxylan is very low (0.03 U/mg). From glucuronoxylan SlXyn30A releases a series of acidic xylooligosaccharides of general formula MeGlcA2Xyln. These products, which are typical for GH30-specific glucuronoxylanases, are subsequently shortened at the non-reducing end, from which xylobiose moieties are liberated. Xylobiohydrolase activity was also observed during the hydrolysis of various xylooligosaccharides. SlXyn30A thus expands the group of glucuronoxylanases/xylobiohydrolases which has been hitherto represented only by several fungal GH30-7 members.

Improving the Thermostability of a Fungal GH11 Xylanase via Fusion of a Submodule (C2) from Hyperthermophilic CBM9_1-2

Xylanases have been applied in many industrial fields. To improve the activity and thermostability of the xylanase CDBFV from Neocallimastix patriciarum (GenBank accession no. KP691331), submodule C2 from hyperthermophilic CBM9_1-2 was inserted into the N- and/or C-terminal regions of the CDBFV protein (producing C2-CDBFV, CDBFV-C2, and C2-CDBFV-C2) by genetic engineering. CDBFV and the hybrid proteins were successfully expressed in Escherichia coli BL21 (DE3). Enzymatic property analysis indicates that the C2 submodule had a significant effect on enhancing the thermostability of the CDBFV. At the optimal temperature (60.0 °C), the half-lives of the three chimeras C2-CDBFV, CDBFV-C2, and C2-CDBFV-C2 are 1.5 times (37.5 min), 4.9 times (122.2 min), and 3.8 times (93.1 min) longer than that of wild-type CDBFV (24.8 min), respectively. More importantly, structural analysis and molecular dynamics (MD) simulation revealed that the improved thermal stability of the chimera CDBFV-C2 was on account of the formation of four relatively stable additional hydrogen bonds (S42-S462, T59-E277, S41-K463, and S44-G371), which increased the protein structure’s stability. The thermostability characteristics of CDBFV-C2 make it a viable enzyme for industrial applications.

Functional characterization of a GH62 family α-L-arabinofuranosidase from Eupenicillium parvum suitable for monosaccharification of corncob arabinoxylan in combination with key enzymes

Corncob rich in arabinoxylan is an important raw material widely used in bio-refinery. Complete saccharification of arabinoxylan depends on the synergism of different enzymes including α-L-arabinofuranosidase (ABF). This study aimed to investigate the functional characteristics of a new ABF EpABF62A belonging to glycoside hydrolase (GH) 62 family from the fungus Eupenicillium parvum, and to explore its potential in the saccharification of corncob arabinoxylan. The recombinant EpABF62A showed high activity against wheat arabinoxylan and rye arabinoxylan, with the optimal temperature of 55 °C and pH of 4.5. The protein contains an N-terminal cellulose-binding domain family 1 (CBM_1) domain, and displayed a 59.5% absorption rate to phosphoric acid swollen cellulose. Regioselectivity analysis indicated that the enzyme selectively removed α-1,2 or α-1,3 linked arabinofuranosyl residues on mono-substituted xylose residues on arabinoxylan. Corncob arabinoxylans (CAX1 or CAX2) with different (low or high) branching degrees were extracted from the raw material by alkaline hydrogen peroxide pretreatment and graded ethanol precipitation. Single EpABF62A removed 69.5% or 67.1% arabinose from CAX1 or CAX2, respectively. EpABF62A combined with a GH10 xylanase, a GH43 β-D-xylosidase and a GH67 α-glucuronidase released 75.0% or 64.5% xylose from CAX1 or CAX2, respectively. The addition of the four hemicellulases enhanced the saccharification the solid fraction of the pretreated corncob by the commercial cellulase Cellic® CTec2, and the conversion ratios of glucose, xylose and arabinose were up to 94.0%, 91.8% and 82.6%, respectively.

Engineering non-conserved salt bridges in GH11 xylanase from Bacillus pumilus SSP34 for improved thermal stability: an in-silico evaluation

GH11 xylanases are commercially important enzymes for degradation of xylan fibers. We have identified the presence of nine non-conserved and five conserved salt bridges in GH11 xylanase from Bacillus pumilus SSP34. We have designed two sets of mutants viz., (1) substitution mutants in which non-conserved charged amino acid residues have been replaced with appropriate hydrophobic residues based on side chain occupancy and hydrophobicity and (2) deletion mutants where non-conserved charged residues have been deleted. The stability of the mutants has been evaluated in-silico by analyzing the contributions of non-covalent interactions like hydrophobic interaction clusters and salt bridges. The stability of the resultant mutants was evaluated using parameters such as radius of gyration, solvent accessible surface area, root mean square deviation, root mean square fluctuations and protein unfolding measurements using molecular dynamic simulations. The deletion of certain charged residues resulted in mutants having lowered radius of gyration and decreased surface areas. However, RMSD and RMSF measurements indicated lowered stability in comparison to substitution mutants. Of the substitution mutants, the SBM 3 was the most stable mutant as indicated by Rg, SASA, RMSF and simulated protein unfolding measurements. The major contributing factors for improved stability could be strengthening of hydrophobic interactions in the GH11 xylanase from B. pumilus. These in-silico stability measurements of salt bridge mutants may lead to better design of GH11 xylanases for commercial applications. Communicated by Ramaswamy H. Sarma

Biochemical characterization of xylanase GH11 isolated from Aspergillus niger BCC14405 (XylB) and its application in xylooligosaccharide production.

To develop an endo-β-1,4-xylanase with high specificity for production of prebiotic xylooligosaccharides that optimally works at moderate temperature desirable to reduce the energy cost in the production process. The xylB gene, encoding for a glycosyl hydrolase family 11 xylanase from a thermoresistant fungus, Aspergillus niger BCC14405 was expressed in a methylotrophic yeast P. pastoris KM71 in a secreted form. The recombinant XylB showed a high specific activity of 3852 and 169 Umg-1 protein on beechwood xylan and arabinoxylan, respectively with no detectable side activities against different forms of cellulose (Avicel Ò PH101 microcrystalline cellulose, phosphoric acid swollen cellulose and carboxymethylcellulose). The enzyme worked optimally at 45°C, pH 6.0. It showed a specific cleavage pattern by releasing xylobiose (X2) as the major product from xylooligosaccharides (X3 to X6) substrates. The highest XOS yield of 708mgg-1 substrate comprising X2, X3 and X6 was obtained from beechwood xylan hydrolysis. The enzyme is potent for XOS production and for saccharification of lignocellulosic biomass.

Enhancement of thermostability of GH10 xylanase E Penicillium canescens directed by ΔΔG calculations and structure analysis

Hydrolytic enzymes are highly demanded in the industry. Thermostability is an important property of enzymes that affects the economic costs of the industrial processes. The rational design of GH10 xylanase E (XylE) Penicillium canescens for the thermostability improvement was directed by ΔΔG calculations and structure analysis. Amino acid substitutions with stabilizing values of ΔΔG and providing an increase in side-chain volume of buried residues were performed experimentally. From the six designed substitutions, four substitutions appeared to be stabilizing, one – destabilizing, and one – neutral. For the improved XylE variants, values of Tm were increased by 1.1–3.1 °C, and times of half-life at 70 °C were increased in 1.3–1.7-times. Three of the four stabilizing substitutions were located in the N- or the C-terminus region. This highlights the importance of N- and C-terminus for the thermostability of GH10 xylanases and also enzymes with (β/α)8 TIM barrel type of structure. The criteria of stabilizing values of ΔΔG and increased side-chain volume of buried residues for selection of substitutions may be applied in the rational design for thermostability improvement.

Enzymatic Production of Xylo-oligosaccharides from Destarched Wheat Bran and the Impact of Their Degree of Polymerization and Substituents on Their Utilization as a Carbon Source by Probiotic Bacteria.

The enzymatic production of xylo-oligosaccharides (XOs) from destarched wheat bran with a GH11 xylanase was studied. Xylo-oligosaccharides (XOs) produced were separated into different fractions according to their degree of polymerization (DP) and the nature of their substituents: arabinoxylo-oligosaccharides (AXOs) with a DP from 2 to 3 and DP from 2 to 6 and feruloylated arabinoxylo-oligosaccharides (FAXOs) esterified by ferulic and p-coumaric acids with a DP from 3 to 6. Both AXOs (short and long DP) and FAXOs stimulated the growth of Bifidobacterium adolescentis, Faecalibacterium prausnitzii, and Prevotella copri similarly but not Lactobacillus rhamnosus. The utilization of AXOs and FAXOs as a carbon source resulted in the increase in turbidity, decrease in pH, and production of short-chain fatty acids (SCFAs) in the culture broth. The highest amount of SCFAs was produced by F. prausnitzii using FAXOs. Results suggest that FAXOs and AXOs have the potential to be considered as prebiotics.

An Eco-Friendly Production of a Novel and Highly Active Endo-1,4-beta-xylanase from Aspergillus clavatus

Aims: Here, we describe a novel way to produce an endo-1,4-beta-xylanase from Aspergillus clavatus using paper and pulp industry waste.
 Methodology: Optimal Aspergillus clavatus NRRL1 cultivation conditions were evaluated using minimal medium with different concentrations (1 to 10%) of paper sludge pretreated with HCl, during different periods (1 to 14 days), with different pH values (3.0; 3.5; 4.0; 4.5; 5.0; 5.5; 6.0; 6.5; 7.0; 7.5 and 8.0), different temperatures (25, 30, 35, and 40 ºC) and different mixing conditions (static and stirring). After that, the enzyme activity was determined by DNS (3,5-dinitrosalicylic acid), protein concentration was quantified by Bradford, SDS-PAGE was performed to evaluate the molecular mass, and TLC observed hydrolysis products.
 Results: The enzyme showed a molecular mass of 25 kDa, and its production has been highly improved by optimizing culture conditions. The best activity of this enzyme was obtained when A. clavatus was cultivated for 5 days, at 120 rpm, 5% paper sludge, pH 6.0, and 35 ºC. The degradation profile of the beechwood xylan by the crude extract containing the GH11 xylanase showed xylotriose as the main product, but xylotetraose and xylobiose were also produced in significant amounts.
 Conclusion: In addition to the fact that this xylanase has the property of producing large quantities of XOS (mainly xylotriose), it has the advantage of being obtained from recyclable waste of the pulp and paper industry. These facts confer great potential for future biotechnological and industrial applications.

Identification and characterization of a thermostable GH11 xylanase from Paenibacillus campinasensis NTU-11 and the distinct roles of its carbohydrate-binding domain and linker sequence

An extracellular thermostable xylanase (XynNTU) from Paenibacillus campinasensis NTU-11, consisted of a glycoside hydrolase (GH) family 11 catalytic domain, a Gly/Pro-rich linker sequence (LS) and a family 6 carbohydrate-binding module (CBM6), was identified and expressed in E. coli BL21. The purified XynNTU had a specific activity of 2750 U/mg and an optimal activity at 60 °C and pH 7.0, and retained a residual activity of 58.4% after incubation (60 °C, 48 h). Two truncated mutants, CBM6-truncated form XynNTU-CDLS, CBM6 and linker-truncated form XynNTU-CD, possessed similar values of optimum pH and temperature as the native XynNTU. XynNTU-CD displayed a lower thermostability than XynNTU, whereas for XynNTU-CDLS, more than 90% of residual activity was remained (60 °C, 48 h), indicating that this enzyme presented a higher thermostability than that of the majority of reported GH11 xylanases. Furthermore, XynNTU and two mutants maintained more than 70% of residual activity at pH values of 5–9. Kinetic measurements suggested that CBM6 had a crucial function in the ability of the enzyme to bind and hydrolyze xylan substrates, while LS had a relatively mild influence. Collectively, a noticeable thermostability and a high specific activity of XynNTU and its truncated form XynNTU-CDLS highlights their potentials for diverse industrial applications.

Sequence- and structure-guided improvement of the catalytic performance of a GH11 family xylanase from Bacillus subtilis

Xylanases produce xylooligosaccharides from xylan and have thus attracted increasing attention for their usefulness in industrial applications. Previously, we demonstrated that the GH11 xylanase XynLC9 from Bacillus subtilis formed xylobiose and xylotriose as the major products with negligible production of xylose when digesting corncob-extracted xylan. Here, we aimed to improve the catalytic performance of XynLC9 via protein engineering. Based on the sequence and structural comparisons of XynLC9 with the xylanases Xyn2 from Trichoderma reesei and Xyn11A from Thermobifida fusca, we identified the N-terminal residues 5-YWQN-8 in XynLC9 as engineering hotspots and subjected this sequence to site saturation and iterative mutagenesis. The mutants W6F/Q7H and N8Y possessed a 2.6- and 1.8-fold higher catalytic activity than XynLC9, respectively, and both mutants were also more thermostable. Kinetic measurements suggested that W6F/Q7H and N8Y had lower substrate affinity, but a higher turnover rate (kcat), which resulted in increased catalytic efficiency than WT XynLC9. Furthermore, the W6F/Q7H mutant displayed a 160% increase in the yield of xylooligosaccharides from corncob-extracted xylan. Molecular dynamics simulations revealed that the W6F/Q7H and N8Y mutations led to an enlarged volume and surface area of the active site cleft, which provided more space for substrate entry and product release and thus accelerated the catalytic activity of the enzyme. The molecular evolution approach adopted in this study provides the design of a library of sequences that captures functional diversity in a limited number of protein variants.

Improvement of XYL10C_\u2206N catalytic performance through loop engineering for lignocellulosic biomass utilization in feed and fuel industries

BackgroundXylanase, an important accessory enzyme that acts in synergy with cellulase, is widely used to degrade lignocellulosic biomass. Thermostable enzymes with good catalytic activity at lower temperatures have great potential for future applications in the feed and fuel industries, which have distinct demands; however, the potential of the enzymes is yet to be researched.ResultsIn this study, a structure-based semi-rational design strategy was applied to enhance the low-temperature catalytic performance of Bispora sp. MEY-1 XYL10C_∆N wild-type (WT). Screening and comparisons were performed for the WT and mutant strains. Compared to the WT, the mutant M53S/F54L/N207G exhibited higher specific activity (2.9-fold; 2090 vs. 710 U/mg) and catalytic efficiency (2.8-fold; 1530 vs. 550 mL/s mg) at 40 °C, and also showed higher thermostability (the melting temperature and temperature of 50% activity loss after 30 min treatment increased by 7.7 °C and 3.5 °C, respectively). Compared with the cellulase-only treatment, combined treatment with M53S/F54L/N207G and cellulase increased the reducing sugar contents from corn stalk, wheat bran, and corn cob by 1.6-, 1.2-, and 1.4-folds, with 1.9, 1.2, and 1.6 as the highest degrees of synergy, respectively.ConclusionsThis study provides useful insights into the underlying mechanism and methods of xylanase modification for industrial utilization. We identified loop2 as a key functional area affecting the low-temperature catalytic efficiency of GH10 xylanase. The thermostable mutant M53S/F54L/N207G was selected for the highest low-temperature catalytic efficiency and reducing sugar yield in synergy with cellulase in the degradation of different types of lignocellulosic biomass.Graphic

Characterization and structural analysis of a thermophilic GH11 xylanase from compost metatranscriptome.

Xylanase is efficient for xylan degradation and widely applied in industries. We found a GH11 family xylanase (Xyn11A) with high thermostability and catalytic activity from compost metatranscriptome. This xylanase has the optimal reaction temperature at 80°C with the activity of 2907.3 U/mg. The X-ray crystallographic structure shows a typical "right hand" architecture, which is the characteristics of the GH11 family enzymes. Comparing it with the mesophilic XYN II, a well-studied GH11 xylanase from Trichoderma reesei, Xyn11A is more compact with more H-bonds. Our mutagenic results show that the electrostatic interactions in the thumb and palm region of Xyn11A could result in its high thermostability and activity. Introducing a disulfide bond at the N-terminus further increased its optimal reaction temperature to 90°C with augmented activity. KEY POINTS: • A hyperthermophilic xylanase with high activity was discovered using the metatranscriptomic method. • The mechanisms of thermophilicity and high activity were revealed using X-ray crystallography, mutagenesis, and molecular dynamics simulations. • The thermostability and activity were further improved by introducing a disulfide bond.

Paludibacter propionicigenes GH10 xylanase as a tool for enzymatic xylooligosaccharides production from heteroxylans

Bioconversion of lignocellulosic biomass into value-added products relies on polysaccharides depolymerization by carbohydrate active enzymes. This work reports biochemical characterization of Paludibacter propionicigenes xylanase from GH10 (PpXyn10A) and its application for enzymatic xylooligosaccharides (XOS) production from commercial heteroxylans and liquor of hydrothermally pretreated corn cobs (PCC). PpXyn10A is tolerant to ethanol and NaCl, and releases xylobiose (X2) and xylotriose (X3) as the main hydrolytic products. The conversion rate of complex substrates into short XOS was approximately 30% for glucuronoxylan and 8.8% for rye arabinoxylan, after only 4 h; while for PCC, PpXyn10A greatly increased unbranched XOS yields. B. adolescentis fermentation with XOS from beechwood glucuronoxylan produced mainly acetic and lactic acids. Structural analysis shows that while the glycone region of PpXyn10A active site is well preserved, the aglycone region has aromatic interactions in the +2 subsite that may explain why PpXyn10A does not release xylose.

Loop engineering of a thermostable GH10 xylanase to improve low-temperature catalytic performance for better synergistic biomass-degrading abilities

Lignocellulosic biorefining for producing biofuels poses technical challenges. It is usually conducted over a long time using heat, making it energy intensive. In this study, we lowered the energy consumption of this process through an optimized enzyme and pretreatment strategy. First, the dominant mutant M137E/N269G of Bispora sp. MEY-1XYL10C_ΔN was obtained by directed evolution with highcatalytic efficiency (970 mL/s∙mg)and specific activity (2090 U/mg)at 37 °C, and thermostability was improved (T50 increased by5 °C). After pretreatment with seawater immersionfollowing steam explosion,bagasse was co-treated with cellulase and M137E/N269G under mild conditions (37 °C), the resulting highest yield of fermentable sugars reached 219 µmol/g of bagasse,46% higher than that of the non-seawater treatment group, with the highest degree of synergy of 2.0. Pretreatment with seawater following steam explosion and synergistic hydrolysis through high activity xylanase and cellulase helped to achieve low energy degradation of lignocellulosic biomass.