GF-3 Synthetic Aperture Radar Research Articles

Image-Based Baseline Correction Method for Spaceborne InSAR With External DEM

An accurate baseline of synthetic aperture radar (SAR) interferometry (InSAR) is an important parameter for the geodetic application of the InSAR data. Although some advanced SAR satellites have precise orbit determination, there are still many SAR satellites suffering from baseline inaccuracies, such as GF-3. In this article, an image-based estimator for baseline correction is proposed, which requires only the external digital elevation model (DEM) data. The idea of the method is to project the orbit error phase onto the phase components carrying the baseline error information, which is called orbit error phase bases in this article, and to correct the baseline according to the projection coefficients. Since the pure orbit error phase is unavailable, the residual phase of the interferogram is used to approximate the orbit error phase, and a series of processes are introduced to weaken the effect of this approximation. Both the simulated and real data from GF-3 SAR are used to validate the proposed method, and a comparison with the conventional nonlinear least-square and the latest proposed flat-Earth phase-based baseline refinement methods are made. The results indicated the superior accuracy and robustness of our method, especially in areas with higher relief and wider coverage.

Combination of Hyperspectral and Quad-Polarization SAR Images to Classify Marsh Vegetation Using Stacking Ensemble Learning Algorithm

Combinations of multi-sensor remote sensing images and machine learning have attracted much attention in recent years due to the spectral similarity of wetland plant canopy. However, the integration of hyperspectral and quad-polarization synthetic aperture radar (SAR) images for classifying marsh vegetation has still been faced with the challenges of using machine learning algorithms. To resolve this issue, this study proposed an approach to classifying marsh vegetation in the Honghe National Nature Reserve, northeast China, by combining backscattering coefficient and polarimetric decomposition parameters of C-band and L-band quad-polarization SAR data with hyperspectral images. We further developed an ensemble learning model by stacking Random Forest (RF), CatBoost and XGBoost algorithms for marsh vegetation mapping and evaluated its classification performance of marsh vegetation between combinations of hyperspectral and full-polarization SAR data and any of the lone sensor images. Finally, this paper explored the effect of different polarimetric decomposition methods and wavelengths of radar on classifying wetland vegetation. We found that a combination of ZH-1 hyperspectral images, C-band GF-3, and L-band ALOS-2 quad-polarization SAR images achieved the highest overall classification accuracy (93.13%), which was 5.58–9.01% higher than that only using C-band or L-band quad-polarization SAR images. This study confirmed that stacking ensemble learning provided better performance than a single machine learning model using multi-source images in most of the classification schemes, with the overall accuracy ranging from 77.02% to 92.27%. The CatBoost algorithm was capable of identifying forests and deep-water marsh vegetation. We further found that L-band ALOS-2 SAR images achieved higher classification accuracy when compared to C-band GF-3 polarimetric SAR data. ALOS-2 was more sensitive to deep-water marsh vegetation classification, while GF-3 was more sensitive to shallow-water marsh vegetation mapping. Finally, scattering model-based decomposition provided important polarimetric parameters from ALOS-2 SAR images for marsh vegetation classification, while eigenvector/eigenvalue-based and two-component decompositions produced a great contribution when using GF-3 SAR images.

Influence of Residual Amplitude and Phase Error for GF-3 Quad-Polarization SAR on Wind Vector Retrieval

High-resolution wind vector is important to investigate local winds’ variability over the global ocean. Quad-polarization Synthetic Aperture Radar (SAR) can provide wind vector independently without any external wind direction inputs. Although quad-polarization SAR wind retrieval algorithms have been widely studied, improvements are still required. The amplitude and phase imbalance of polarization channel cannot be neglected for improving the wind vector retrieval precision. In this study, rainforest was performed to remove the amplitude and phase imbalance of polarization channel of GF-3 SAR. To explore the applicability of this method for sea surface measurement, the influence of residual amplitude and phase error for GF-3 quad-polarization SAR on wind vector retrieval was assessed. Variation of amplitude and phase imbalance of sea surface for transmit and receive channel were assessed against collocated wind speed and incidence angle. Considering the polarization difference of VV channel relative to HH channel, the residual amplitude and phase error was found to be closely related to wind speed and polarization isolation. Correction of residual amplitude and phase error were employed to improve the retrieval precision of wind vector. It is revealed that the wind speed retrieval precision of VV polarization improved with correction of residual amplitude error. In addition, the influence of residual amplitude and phase error on wind direction retrieval can be neglected. Thus, it is concluded that correction of amplitude and phase error has the potential to improve wind vector retrievals from GF-3 quad-polarization SAR.

Methods of Sandy Land Detection in a Sparse-Vegetation Scene Based on the Fusion of HJ-2A Hyperspectral and GF-3 SAR Data

Accurate identification of sandy land plays an important role in sandy land prevention and control. It is difficult to identify the nature of sandy land due to vegetation covering the soil in the sandy area. Therefore, HJ-2A hyperspectral data and GF-3 Synthetic Aperture Radar (SAR) data were used as the main data sources in this article. The advantages of the spectral characteristics of a hyperspectral image and the penetration characteristics of SAR data were used synthetically to carry out mixed-pixel decomposition in the “horizontal” direction and polarization decomposition in the “vertical” direction. The results showed that in the study area of the Otingdag Sandy Land, in China, the accuracy of sandy land detection based on feature-level fusion and single GF-3 data was verified to be 92% in both cases by field data; the accuracy of sandy land detection based on feature-level fusion was verified to be 88.74% by the data collected from Google high-resolution imagery, which was higher than that based on single HJ-2A (74.17%) and single GF-3 data (88.08%). To further verify the universality of the feature-level fusion method for sandy land detection, Alxa sandy land was also used as a verification area and the accuracy of sandy land detection was verified to be as high as 88.74%. The method proposed in this paper made full use of the horizontal and vertical structural information of remote sensing data. The problem of mixed pixels in sparse-vegetation scenes in the horizontal direction and the problem of vegetation covering sandy soil in the vertical direction were both well solved. Accurate identification of sandy land can be realized effectively, which can provide technical support for sandy land prevention and control.

An Approach of Sea Clutter Suppression for SAR Images by Self-Supervised Complex-Valued Deep Learning

Strong reflections from the marine surface reduce the contrast between the target-of-interest and the background in synthetic aperture radar (SAR) images and severely affect the interpretation of the image. This letter proposes a framework of SAR sea clutter suppression based on a new self-supervised training strategy referred to as Clutter2Clutter (C2C), which mines self-supervised information from a large number of unlabeled SAR patches for network training. This letter also proposes a complex-valued UNet++ (CV-UNet++) network model to make full use of both amplitude and phase information of the complex SAR image, and the C2C strategy is used to train the CV-UNet++ for sea clutter suppression. Experiments on GF-3 and TerraSAR-X SAR data show that the proposed method has a better effect on suppressing sea clutter and is able to preserve the target-of-interest energy well.

Bankline detection of GF-3 SAR images based on shearlet.

The GF-3 satellite is China’s first self-developed active imaging C-band multi-polarization synthetic aperture radar (SAR) satellite with complete intellectual property rights, which is widely used in various fields. Among them, the detection and recognition of banklines of GF-3 SAR image has very important application value for map matching, ship navigation, water environment monitoring and other fields. However, due to the coherent imaging mechanism, the GF-3 SAR image has obvious speckle, which affects the interpretation of the image seriously. Based on the excellent multi-scale, directionality and the optimal sparsity of the shearlet, a bankline detection algorithm based on shearlet is proposed. Firstly, we use non-local means filter to preprocess GF-3 SAR image, so as to reduce the interference of speckle on bankline detection. Secondly, shearlet is used to detect the bankline of the image. Finally, morphological processing is used to refine the bankline and further eliminate the false bankline caused by the speckle, so as to obtain the ideal bankline detection results. Experimental results show that the proposed method can effectively overcome the interference of speckle, and can detect the bankline information of GF-3 SAR image completely and smoothly.

Brightness Compensation for GF-3 SAR Images Based on Cycle-Consistent Adversarial Networks

GF-3 is the first C-Band full-polarimetric synthetic aperture radar (SAR) satellite with a space resolution up to 1m in China. The uneven brightness of SAR images is a problem when using GF-3 images, which makes it difficult to use and produce SAR images. In this paper, a brightness compensation method is proposed for GF-3 SAR images with unbalanced brightness in some areas based on a deep learning model named Cycle-Consistent Adversarial Networks (CycleGAN). The proposed method makes the image brightness relatively consistent, and it is compared with the MASK dodging algorithm, Wallis dodging algorithm and histogram equalization in terms of the profiles, brightness mean, standard deviation, and average gradient. Results of brightness compensation show that, the proposed method makes the inner brightness differences smaller, and the image quality is obviously improved, which provides even brightness image for subsequent applications, and has great practical significance.

Coastline Extraction from GF-3 SAR Images Using LKDACM and GMM Algorithms

Coastline detection using a Gaussian Mixture Model (GMM) applied to synthetic aperture radar (SAR) imagery is usually inaccurate due to the inherent noise of SAR data. In addition, the traditional active counter model is sensitive to the initial position of the contour line and requires a large number of iterations to converge to a solution. In this study, we first used the GMM algorithm to segment the SAR images and obtain a coarse land and sea segmentation map. This map is then used as the initial position for a subsequent active contour model. The K distribution was introduced into the local statistical active contour model to better model the SAR image. The Gaussian distribution-based local active contour model and the algorithm detailed in this paper were used to perform coastline extraction experiments on four SAR images. Four GF-3 SAR images with different modes were collected to validate the efficiency of the proposed method. The experimental results show that the coastline extraction methods from SAR images based on the GMM algorithm and the K distribution-based local statistical active contour model (LKDACM) overcame the shortcomings of the traditional active contour model to accurately and quickly detect coastlines, thus enabling the detection of coastline changes.

Data Quality Evaluation of Sentinel-1 and GF-3 SAR for Wind Field Inversion

Synthetic aperture radar (SAR) is an important means to observe the sea surface wind field. Sentinel-1 and GF-3 are located on orbit SAR satellites, but the SAR data quality of these two satellites has not been evaluated and compared at present. This paper mainly studies the data quality of Sentinel-1 and GF-3 SAR satellites used in wind field inversion. In this study, Sentinel-1 SAR data and GF-3 SAR data located in Malacca Strait, Hormuz Strait and the east and west coasts of the United States are selected to invert wind fields using the C-band model 5.N (CMOD5.N). Compared with reanalysis data called ERA5, the root mean squared error (RMSE) of the Sentinel-1 inversion results is 1.66 m/s, 1.37 m/s and 1.49 m/s in three intervals of 0~5 m/s, 5~10 m/s and above 10 m/s, respectively; the RMSE of GF-3 inversion results is 1.63 m/s, 1.45 m/s and 1.87 m/s in three intervals of 0~5 m/s, 5~10 m/s and above 10 m/s, respectively. Based on the data of Sentinel-1 and GF-3 located on the east and west coasts of the United States, CMOD5.N is used to invert the wind field. Compared with the buoy data, the RMSE of the Sentinel-1 inversion results is 1.20 m/s, and the RMSE of the GF-3 inversion results is 1.48 m/s. The results show that both Sentinel-1 SAR data and GF-3 SAR data are suitable for wind field inversion, but the wind field inverted by Sentinel-1 SAR data is slightly better than GF-3 SAR data. When applied to wind field inversion, the data quality of Sentinel-1 SAR is slightly better than the data quality of GF-3 SAR. The SAR data quality of GF-3 has achieved a world-leading level.

A GF-3 SAR Image Dataset of Road Segmentation

We constructed a GF-3 SAR image dataset based on road segmentation to boost the development of GF-3 synthetic aperture radar (SAR) image road segmentation technology and make GF-3 SAR images be applied to practice better. We selected 23 scenes of GF-3 SAR images in Shaanxi, China, cut them into road chips with 512 × 512 pixels, and then labeled the dataset using LabelMe labeling tool. The dataset consists of 10026 road chips, and these road images are from different GF-3 imaging modes, so there is diversity in resolution and polarization. Three segmentation algorithms such as Multi-task Network Cascades (MNC), Fully Convolutional Instance-aware Semantic Segmentation (FCIS), and Mask Region Convolutional Neural Networks (Mask R-CNN) are trained by using the dataset. The experimental result measures including Average Precision (AP) and Intersection over Union (IoU) show that segmentation algorithms work well with this dataset, and the segmentation accuracy of Mask R-CNN is the best, which demonstrates the validity of the dataset we constructed.

Characteristics of Saline Soil in Extremely Arid Regions: A Case Study Using GF-3 and ALOS-2 Quad-Pol SAR Data in Qinghai, China

Soil salinization is a global problem, which seriously damages the ecological environment and considerably reduces agricultural productivity, especially in arid regions. Synthetic aperture radar (SAR) has been widely used in remote sensing due to its weather and sunlight independence. Polarimetric SAR has great potential for large-scale mapping and monitoring salt-affected soils. In this study, we investigate the characteristics of saline soil in extremely arid regions using dual-band quadrature-polarimetric (quad-pol) SAR images acquired by GF-3 (C-band) and ALOS-2 (L-band). Firstly, the effectiveness of the modified dielectric mixing model and integral equation model (IEM) in describing saline soil is evaluated. Secondly, the potential relationships between polarimetric parameters and salinity are discussed in both the C- and L-band, respectively, such as co-polarization ratio, scattering entropy H, and scattering angle α. Finally, a linear regression model for monitoring salt content is established. The main contributions of this article are as follows: (1) Simulation results suggest that the radar backscattering coefficient is a weak function of salinity at low water content, but our experimental data show that soil salinity significantly contributes to the radar backscattering coefficient, which indicates the modified dielectric mixing model and IEM model is not applicable in extremely arid areas. (2) A negative correlation between the co-polarization ratio and salinity is observed, and the correlation coefficients are 0.64 (C-band) and 0.71 (L-band). Besides, scattering entropy and scattering angle exhibit a positive correlation with salinity in the C-band with correlation coefficients 0.686 and 0.669, respectively, whereas a negative correlation is found in the L-band with correlation coefficients 0.682 and 0.680, respectively. This can be attributed to the different penetration depths and sensitivity to the surface roughness of the electromagnetic waves at two frequencies. (3) A regression model for salinity estimating based on radar backscattering coefficient, co-polarization ratio, and scattering entropy is established, with a determination coefficient (R2) of 0.79 and a root mean square error (RMSE) of 6.56%, allowing us to determine soil salinity from quad-pol SAR images without using backscattering models. Therefore, our results can be a reference for future soil salinity monitoring and inversion.

Underwater Topography Detection and Analysis of the Qilianyu Islands in the South China Sea Based on GF-3 SAR Images

Shallow sea underwater topography plays an important role in the development of islands and reefs. The Qilianyu Islands, located in Xisha, South China Sea, are a key area for the development and utilization of the South China Sea. Compared with traditional underwater topography detection methods, synthetic aperture radar (SAR) has the advantages of low cost, short time consumption, and the large-scale detection of shallow water topography. The GF-3 satellite is the first SAR satellite launched by China, and its ability to probe shallow sea topography has never been assessed. To detect the underwater topography of the Qilianyu Islands and test the application of GF-3 SAR data in shallow sea underwater topography detection, this paper implements the SAR shallow sea underwater topography detection model, the tidal information corresponding to the imaging time of the SAR image, and six GF-3 SAR images to detect the underwater topography of the Qilianyu island and reefs. The detection results have been analyzed from different imaging times, different water depths and different polarization modes, and the first four SAR images show promising detection results. The average absolute error (MAE) and average relative error (MRE) of the results are 1.5 m and 14.33%, respectively, which demonstrates that GF-3 SAR images have an impressive performance in underwater topography detection of South China Sea island reefs.

Spaceborne SAR Data for Regional Urban Mapping Using a Robust Building Extractor

With the rapid development of urbanization, timely and accurate information on the spatial distribution of urban areas is essential for urban planning, environmental protection and sustainable urban development. To date, the main problem of urban mapping using synthetic aperture radar (SAR) data are that nonbuilding objects with high backscattering cause high false alarms, while small-scale buildings with low backscattering result in omission errors. In this paper, a robust building-area extraction extractor is proposed to solve the above problems. The specific work includes (1) building a multiscale and multicategory building area dataset to learn enough building features in various areas; (2) designing a multiscale extraction network based on the residual convolutional block (ResNet50) and a pyramid-based pooling module to extract more discriminative features of building areas and introducing the focal loss item as the object function of the network to further extract the small-scale building areas and (3) eliminating the false alarms using the Normalized Difference Vegetation Index (NDVI) and Modified Normalized Difference Water Index (MNDWI) index. GF-3 SAR data with a 10-m resolution of four regions in China are used to validate our method, and the regional building-area mapping results with overall accuracy above 85% and kappa coefficient not less than 0.73 are obtained. Compared with the current popular networks and the global human settlement layer (GHSL) product, our method shows better extraction results and higher accuracy in multiscale building areas. The experiments using Sentinel-1 and ALOS-2/PALSAR-2 data show that the proposed method has good robustness with different SAR data sources.

Integration of GF2 Optical, GF3 SAR, and UAV Data for Estimating Aboveground Biomass of China’s Largest Artificially Planted Mangroves

Accurate methods to estimate the aboveground biomass (AGB) of mangroves are required to monitor the subtle changes over time and assess their carbon sequestration. The AGB of forests is a function of canopy-related information (canopy density, vegetation status), structures, and tree heights. However, few studies have attended to integrating these factors to build models of the AGB of mangrove plantations. The objective of this study was to develop an accurate and robust biomass estimation of mangrove plantations using Chinese satellite optical, SAR, and Unmanned Aerial Vehicle (UAV) data based digital surface models (DSM). This paper chose Qi’ao Island, which forms the largest contiguous area of mangrove plantation in China, as the study area. Several field visits collected 127 AGB samples. The models for AGB estimation were developed using the random forest algorithm and integrating images from multiple sources: optical images from Gaofen-2 (GF-2), synthetic aperture radar (SAR) images from Gaofen-3 (GF-3), and UAV-based digital surface model (DSM) data. The performance of the models was assessed using the root-mean-square error (RMSE) and relative RMSE (RMSEr), based on five-fold cross-validation and stratified random sampling approach. The results showed that images from the GF-2 optical (RMSE = 33.49 t/ha, RMSEr = 21.55%) or GF-3 SAR (RMSE = 35.32 t/ha, RMSEr = 22.72%) can be used appropriately to monitor the AGB of the mangrove plantation. The AGB models derived from a combination of the GF-2 and GF-3 datasets yielded a higher accuracy (RMSE = 29.89 t/ha, RMSEr = 19.23%) than models that used only one of them. The model that used both datasets showed a reduction of 2.32% and 3.49% in RMSEr over the GF-2 and GF-3 models, respectively. On the DSM dataset, the proposed model yielded the highest accuracy of AGB (RMSE = 25.69 t/ha, RMSEr = 16.53%). The DSM data were identified as the most important variable, due to mitigating the saturation effect observed in the optical and SAR images for a dense AGB estimation of the mangroves. The resulting map, derived from the most accurate model, was consistent with the results of field investigations and the mangrove plantation sequences. Our results indicated that the AGB can be accurately measured by integrating images from the optical, SAR, and DSM datasets to adequately represent canopy-related information, forest structures, and tree heights.

Ulva prolifera detection with dual-polarization GF-3 SAR data

Ulva prolifera is a marine hazard occurs frequently in the Yellow Sea of China, which has led to continuous impacts on the marine environment. Accurate and timely information on Ulva prolifera monitoring by satellite remote sensing, plays a significant role in the marine ecological environment and coastal tourism development. Compared with optical remote sensing, Synthetic Aperture Radar (SAR) has the capability of imaging the earth‘s surface independent of sunlight and cloud, as well as in high spatial resolution. Polarimetric Synthetic Aperture Radar (PolSAR) backscattered signal that contains scattering and phase information, has a great advantage in target observation. An experiment based on GF-3 dual polarimetric characteristics features is implemented, which indicates it is suitable for detecting Ulva prolifera. The detection results are extracted based on the proposed method in Lianyungang coastal zone. Compared with the ground truth of expert interpretation, the kappa coefficient is 0.94, and the overall accuracy is 0.99.

Road Detection Based on Shearlet for GF-3 Synthetic Aperture Radar Images

GF-3 satellite is China’s first C-band multi-polarized synthetic aperture radar (SAR) satellite with the 1-meter resolution, which has been widely used in various fields. Road detection for GF-3 SAR images is an important part of the application of GF-3, especially in fields of map update, target recognition, and image matching. However, speckle appears in GF-3 SAR images due to coherent imaging system and it hinders the interpretation of images seriously. Especially the detection of weak roads under strong speckle background becomes extremely difficult. As a representative of multiscale geometric analysis (MGA) tool, shearlet has the optimal sparse representation feature and strong directional orientation, which can effectively capture edge and other anisotropic feature information, and can accurately describe the sparse characteristics of GF-3 SAR images. Based on shearlet, a method for detecting weak roads under strong speckle interference is proposed. Firstly, the Frost filter is used for despeckling. Secondly, shearlet is used for road detection. Finally, morphological operations are adopted to obtain the final result. Road detection experiments on various types of GF-3 SAR images demonstrate that, the proposed method can effectively overcome the interference of speckle, and completely and smoothly detect road information, which is very suitable for the detection of weak roads under strong speckle interference of GF-3 SAR images.

Rapid detection to long ship wake in synthetic aperture radar satellite imagery

The maritime administrative department employs synthetic aperture radar (SAR) satellite remote sensing technology to obtain evidence of illegal discharge of ships. If the ship is discharged during navigation, it forms a long dark wake on the SAR image due to the suppression of the Bragg wave by the oil film. This study investigates key techniques for rapid detection of long ship wakes, thereby providing law enforcement agencies with candidate ships for possible discharge. This paper presents a rapid long ship wake detection method that uses satellite imaging parameters and the axial direction of the ship in images to determine the potential detection area of the wake. Then, the threshold of long ship wake detection is determined using statistical analysis, the area is binarized, and isolated points are removed using a morphological filter operator. The method was tested with ENVISAT Synthetic Aperture Radar and GF-3 SAR data, and results showed that the method was effective, and the overall accuracy of the decision reaches 71%. We present two innovations; one is a method that draws a Doppler shift curve, and uses the SAR imaging parameters to determine the detection area of the long wake to achieve rapid detection and reduce the image detection area. The other is where a classical linear fitting method is used to quickly and accurately determine whether the detected dark area is a long ship wake and realizes the twisted long ship wake detection caused by the sea surface flow field, which is otherwise difficult to detect by the traditional Radon and Hough transform methods. This method has good suppression performance for the dark spot false alarm formed by low speed wind region or upward flow. The method is developed for maritime ship monitoring system and will promote the operational application of maritime ship monitoring system.

A Channel Phase Error Correction Method Based on Joint Quality Function of GF-3 SAR Dual-Channel Images.

Multichannel SAR is an effective approach to solving the contradiction between high azimuth resolution and wide swath. The goal of this paper is to obtain a new and effective method for estimating and compensating the interchannel phase error of the Chinese GF-3 Synthetic aperture radar (SAR). A channel phase error correction method based on the optimal value of the image domain quality function is proposed. In this method, the phase error is initially compensated using the correlation function method. In the fine correction of dual-channel phase error, a heuristic search algorithm is used to estimate the residual phase by searching the extremum of the quality function. After phase compensation in the image domain, the azimuth ambiguities caused by the remaining phase are eliminated. The proposed image domain processing method provides a new idea for channel phase error correction. The measured data of high-resolution GF-3 dual-channel ultrafine imaging mode verifies the validity of this method.

A Promising Method of Typhoon Wave Retrieval from Gaofen-3 Synthetic Aperture Radar Image in VV-Polarization.

The motivation of this work is to explore the possibility of typhoon wave retrieval (the main parameter is significant wave height (SWH)) for C-band Gaofen (GF-3) synthetic aperture radar (SAR) with a wide swath coverage (>400 km). We aim to establish an analysis of a typhoon wave in the subresolution-scale (approximately 20 × 20 km2) on GF-3 SAR through SAR-measured parameters, including a normalized radar cross section (NRCS) and variance of the normalized SAR image (herein called cvar), which are the basic variables in an empirical wave retrieval algorithm and are independent of visible wave streaks. Several typhoons around the China Seas were captured by Chinese GF-3 SAR in 2017; e.g., Noru, Doksuri, Talim and Hato. The wave fields simulated from the third-generation numerical wave model WAVEWATCH-III (WW3) are collocated with these images. In general, the distribution patterns of the typhoon waves from the WW3 model are consistent with wave fields from the European Centre for Medium-Range Weather Forecasts (ECMWF) at 0.125° grids, indicating that the simulation results from the WW3 model are suitable for our study. In addition to winds retrieved from GF-3 SAR images in vertical-horizontal (VH) polarization, the characteristics of the typhoon wave on vertical-vertical (VV) polarization GF-3 SAR images are studied. It is found that SWH has a linear relationship with NRCS and cvar, however, SWH fluctuates with wind speed at all incidence angles. Based on the analyzed results, we simply tune two empirical wave retrieval algorithms for GF-3 SAR in typhoons. Although the correlation (COR) reaches 0.5 taking account into the NRCS term, a more accurate retrieval algorithm, including more related terms, is anticipated for further development for GF-3 SAR and validated through more typhoon images.

Speckle Suppression by Weighted Euclidean Distance Anisotropic Diffusion

To better reduce image speckle noise while also maintaining edge information in synthetic aperture radar (SAR) images, we propose a novel anisotropic diffusion algorithm using weighted Euclidean distance (WEDAD). Presented here is a modified speckle reducing anisotropic diffusion (SRAD) method, which constructs a new edge detection operator using weighted Euclidean distances. The new edge detection operator can adaptively distinguish between homogenous and heterogeneous image regions, effectively generate anisotropic diffusion coefficients for each image pixel, and filter each pixel at different scales. Additionally, the effects of two different weighting methods (Gaussian weighting and non-linear weighting) of de-noising were analyzed. The effect of different adjustment coefficient settings on speckle suppression was also explored. A series of experiments were conducted using an added noise image, GF-3 SAR image, and YG-29 SAR image. The experimental results demonstrate that the proposed method can not only significantly suppress speckle, thus improving the visual effects, but also better preserve the edge information of images.