A noise study using an aeroelastically scaled BO-105 rotor was conducted in the German-Dutch Wind Tunnel to examine the use of higher harmonic control (HHC) of blade pitch to reduce impulsive blade-vortex interaction (BVI) noise. The noise directivity was measured over a large plane underneath the rotor using a traversing inflow microphone array. Noise and vibration measurements were made for a range of matched rotor operating conditions where prescribed (or open loop) HHC pitch, at various amplitudes and phases, was superimposed on normal (baseline) collective and cyclic trim pitch. Acoustic data are presented for 3, 4, and 5P HHC applied to a typical landing approach rotor operating condition where BVI noise is normally intense. Noise reductions of up to 6 dB were found for the advancing side BVI noise radiating upstream of the rotor, and also for the retreating side BVI noise radiating below and downstream of the rotor. The relative levels between the sides were modified by HHC control phase. To help give insight to the physics of the HHC/BVI noise problem, highresolution loading and noise prediction results are presented for comparison to the data. The predictions are based on a new high-resolution version of the CAMRAD rotor performance program under development at Langley, called HIRES.