Genome Editing Tools Research Articles

Improvement of the Genome Editing Tools Based on 5FC/5FU Counter Selection in Clostridium acetobutylicum.

Several genetic tools have been developed for genome engineering in Clostridium acetobutylicum utilizing 5-fluorouracil (5FU) or 5-fluorocytosine (5FC) resistance as a selection method. In our group, a method based on the integration, by single crossing over, of a suicide plasmid (pCat-upp) followed by selection for the second crossing over using a counter-selectable marker (the upp gene and 5FU resistance) was recently developed for genome editing in C. acetobutylicum. This method allows genome modification without leaving any marker or scar in a strain of C. acetobutylicum that is ∆upp. Unfortunately, 5FU has strong mutagenic properties, inducing mutations in the strain's genome. After numerous applications of the pCat-upp/5FU system for genome modification in C. acetobutylicum, the CAB1060 mutant strain became entirely resistant to 5FU in the presence of the upp gene, resulting in failure when selecting on 5FU for the second crossing over. It was found that the potential repressor of the pyrimidine operon, PyrR, was mutated at position A115, leading to the 5FU resistance of the strain. To fix this problem, we created a corrective replicative plasmid expressing the pyrR gene, which was shown to restore the 5FU sensitivity of the strain. Furthermore, in order to avoid the occurrence of the problem observed with the CAB1060 strain, a preventive suicide plasmid, pCat-upp-pyrR*, was also developed, featuring the introduction of a synthetic codon-optimized pyrR gene, which was referred to as pyrR* with low nucleotide sequence homology to pyrR. Finally, to minimize the mutagenic effect of 5FU, we also improved the pCat-upp/5FU system by reducing the concentration of 5FU from 1 mM to 5 µM using a defined synthetic medium. The optimized system/conditions were used to successfully replace the ldh gene by the sadh-hydG operon to convert acetone into isopropanol.

Applying the CRISPR/Cas9 for Treating Human and Animal Diseases – Comprehensive Review

Abstract Recently, genome editing tools have been extensively used in many biomedical sciences. The gene editing system is applied to modify the dnA sequences in the cellular system to comprehend their physiological response. A developing genome editing technology like clustered regularly short palindromic repeats (CRISPR) is widely used in medical sciences. CRISPR and CRISPR-associated protein 9 (CRISPR/Cas9) system is being exploited to edit any DNA mutations related to inherited ailments to investigate in animals (in vivo) and cell lines (in vitro). Remarkably, CRISPR/Cas9 could be employed to examine treatments of many human genetic diseases such as cystic fibrosis, tyrosinemia, phenylketonuria, muscular dystrophy, Parkinson’s disease, retinoschisis, hemophilia, β-thalassemia and atherosclerosis. Moreover, CRISPR/Cas9 was used for disease resistance such as tuberculosis, Johne’s diseases, chronic enteritis, and brucellosis in animals. Finally, this review discusses existing progress in treating hereditary diseases using CRISPR/Cas9 technology and the high points accompanying obstacles.

Recent Updates on the Management of Human Papillomavirus-related Cancers

Abstract: Cervical cancer incidence and mortality rates have been steadily decreasing in developed nations owing to the excellent screening programs executed. However, it still remains one of the most prevalent tumors in developing nations, contributing significantly to cancer-related mortality in females. The major causal factor in the genesis of cervical cancer is recognized to be human papillomavirus (HPV) infection. The female population, particularly in poor countries, is highly susceptible to HPV infections and cervical cancer as a result of the increasing costs posed by widespread cervical screening and HPV vaccination methods. Understanding the roles of HPV oncoproteins (E6 and E7) and non-coding RNAs, along with their many cellular targets, can help us develop targeted drug therapy to manage cervical cancer. In the hunt for novel ways for effective disease control and prevention, new insights and methodologies in molecular biology keep evolving continuously. In the recent past, newer studies have revealed deeper knowledge of HPV-activated molecular signaling pathways as well as prospective targets for early diagnosis, prevention, and therapy of HPV-related malignancies. Also, there has been much new research conducted on genome-editing tools for HPVinduced cervical cancer treatment in conjunction with other treatment strategies, such as immunotherapy and therapeutic vaccines.

Scaffold-based non-viral CRISPR delivery platform for efficient and prolonged gene activation to accelerate tissue regeneration

Clustered regularly interspaced short palindromic repeat activation (CRISPRa) technology has emerged as a precise genome editing tool for activating endogenous transgene expression. While it holds promise for precise cell modification, its translation into tissue engineering has been hampered by biosafety concerns and suboptimal delivery methods. To address these challenges, we have developed a CRISPRa non-viral gene delivery platform by immobilizing non-viral CRISPRa complexes into a biocompatible hydrogel/nanofiber (Gel/NF) composite scaffold. The Gel/NF scaffold facilitates the controlled and sustained release of CRISPRa complexes and also promotes cell recruitment to the scaffold for efficient and localized transfection. As a proof of concept, we employed this CRISPRa delivery platform to activate the vascular endothelial growth factor (VEGF) gene in a rat model with full-thickness skin defects. Our results demonstrate sustained upregulation of VEGF expression even at 21 days post-implantation, resulting in enhanced angiogenesis and improved skin regeneration. These findings underscore the potential of the Gel/NF scaffold-based CRISPRa delivery platform as an efficient and durable strategy for gene activation, offering promising prospects for tissue regeneration. Statement of significanceTranslation of clustered regularly interspaced short palindromic repeat activation (CRISPRa) therapy to tissue engineering is limited by biosafety concerns and unsatisfactory delivery strategy. To solve this issue, we have developed a CRISPRa non-viral gene delivery platform by immobilizing non-viral CRISPRa complexes into a biocompatible hydrogel/nanofiber (Gel/NF) composite scaffold. This scaffold enables controlled and sustained release of CRISPRa and can induce cell recruitment for localized transfection. As a proof of concept, we activated vascular endothelial growth factor (VEGF) in a rat model with full-thickness skin defects, leading to sustained upregulation of VEGF expression, enhanced angiogenesis and improved skin regeneration in vivo. These findings demonstrate the potential of this platform for gene activation, thereby offering promising prospects for tissue regeneration.

Engineering Drought Tolerance in Crops Using CRISPR Cas systems

Drought stress is one of the most considerable threats to global agricultural food security, causing yield losses worldwide. Therefore, the search for effective genetic and molecular methods for developing cultivars that are tolerant or resistant to harsh environments has been more intensive over the last decades. Apart from time-consuming conventional breeding techniques, biotechnologists are now investigating modern genome editing tools for engineering tolerance and resistance to various biotic and abiotic stresses in crops. Various genetic engineering techniques such as zinc finger nucleases (ZFNs) and transcription activator-like effector nucleases (TALENs) were developed based on the discovery of the DNA structure. However, these methods have limitations, with ZFNs being prone to errors due to their limited base pair recognition, and TALENs requiring a complex protein engineering process and struggling to cleave methylated DNA. In recent years, clustered regularly interspaced short palindromic repeats/CRISPR-associated protein 9 (CRISPR/Cas9) and its alternatives have gained popularity in plant biotechnology. Out of the genome editing techniques mentioned earlier, CRISPR/Cas9 is becoming more popular because it's faster and easier to use. Given that drought is now a significant threat to global agriculture due to the drying of arable lands, this review focuses on how we can use CRISPR genome editing to enhance crop tolerance to drought stress and explores its future potential.

CRISPR-based bioengineering in microalgae for production of industrially important biomolecules.

Microalgae, as photosynthetic organisms, have the potential to produce biomolecules for use in food, feed, cosmetics, nutraceuticals, fuel, and other applications. Faster growth rates and higher protein and lipid content make microalgae a popular chassis for many industrial applications. However, challenges such as low productivity and high production costs have limited their commercialization. To overcome these challenges, bioengineering approaches such as genetic engineering, metabolic engineering, and synthetic biology have been employed to improve the productivity and quality of microalgae-based products. Genetic engineering employing genome editing tools like CRISPR/Cas allows precise and targeted genetic modifications. CRISPR/Cas systems are presently used to modify the genetic makeup of microalgae for enhanced production of specific biomolecules. However, these tools are yet to be explored explicitly in microalgae owing to some limitations. Despite the progress made in CRISPR-based bioengineering approaches, there is still a need for further research to optimize the production of microalgae-based products. This includes improving the efficiency of genome editing tools, understanding the regulatory mechanisms of microalgal metabolism, and optimizing growth conditions and cultivation strategies. Additionally, addressing the ethical, social, and environmental concerns associated with genetic modification of microalgae is crucial for the responsible development and commercialization of microalgae-based products. This review summarizes the advancements of CRISPR-based bioengineering for production of industrially important biomolecules and provides key considerations to use CRISPR/Cas systems in microalgae. The review will help researchers to understand the progress and to initiate genome editing experiments in microalgae.

Heterologous Single-Strand DNA-Annealing and Binding Protein Enhance CRISPR-Based Genome Editing Efficiency in Komagataella phaffii.

The industrial yeast Komagataella phaffii is a highly effective platform for heterologous protein production, owing to its high protein expression and secretion capacity. Heterologous genes and proteins are involved in multiple processes, including transcription, translation, protein folding, modification, transportation, and degradation; however, engineering these proteins and genes is challenging due to inefficient genome editing techniques. We employed Pseudomonas aeruginosa phage single-stranded DNA-annealing protein (SSAP) PapRecT and P. aeruginosa single-stranded DNA-binding protein (SSB) PaSSB to introduce SSAP-SSB-based homology recombination, which facilitated K. phaffii CRISPR-based genome engineering. Specifically, a host-independent method was developed by expressing sgRNA with PapRecT-PaSSB in a single plasmid, with which only a 50 bp short homologous arm (HA) reached a 100% positive rate for CRISPR-based gene insertion, reaching 18 colony-forming units (CFU) per μg of donor DNA. Single deletion using 1000 bp HA attained 100%, reaching 68 CFUs per μg of donor DNA. Using this efficient CRISPR-based genome editing tool, we integrated three genes (INO4, GAL4-like, and PAB1) at three different loci for overexpression to realize the collaborative regulation of human-lactalbumin (α-LA) production. Specifically, we strengthened phospholipid biosynthesis to facilitate endoplasmic reticulum membrane formation and enhanced recombinant protein transcription and translation by overexpressing transcription and translation factors. The final production of α-LA in the 3 L fermentation reached 113.4 mg L-1, two times higher than that of the strain without multiple site gene editing, which is the highest reported titer in K. phaffii. The CRISPR-based genome editing method developed in this study is suitable for the synergistic multiple-site engineering of protein and biochemical biosynthesis pathways to improve the biomanufacturing efficiency.

Design of prime-editing guide RNAs with deep transfer learning

Prime editors (PEs) are promising genome-editing tools, but effective optimization of prime-editing guide RNA (pegRNA) design remains a challenge owing to the lack of accurate and broadly applicable approaches. Here we develop Optimized Prime Editing Design (OPED), an interpretable nucleotide language model that leverages transfer learning to improve its accuracy and generalizability for the efficiency prediction and design optimization of pegRNAs. Comprehensive validations on various published datasets demonstrate its broad applicability in efficiency prediction across diverse scenarios. Notably, pegRNAs with high OPED scores consistently show significantly increased editing efficiencies. Furthermore, the versatility and efficacy of OPED in design optimization are confirmed by efficiently installing various ClinVar pathogenic variants using optimized pegRNAs in the PE2, PE3/PE3b and ePE editing systems. OPED consistently outperforms existing state-of-the-art approaches. We construct the OPEDVar database of optimized designs from over two billion candidates for all pathogenic variants and provide a user-friendly web application of OPED for any desired edit.

Different Approach on our Cells and the Use of CRISPR/Cas 9 Technology: Super Gene'ethic

Aims: CRISPR/Cas9, a revolutionary genome editing tool derived from a bacterial system, has transformed molecular biology research, enabling precise and versatile modifications to the genome. This study surveyed 300 participants, including instructors, second-year medical students, and patient relatives from Selcuk University Faculty of Medicine, to assess their knowledge, attitudes, and ethical perspectives on gene editing. Methods: A comprehensive survey was conducted, and the participants' demographics were correlated with their responses. Statistical analysis was performed using SPSS 22.0. Results: The survey revealed significant differences (p<0.05) in attitudes based on gender, age, and participation groups. The age group of 18-29 exhibited the highest participation rate (57.3%), while the age group of 60-65 had the lowest (1%). Approximately 50.3% of participants reported no prior knowledge of CRISPR/Cas9, and 64.3% were university graduates. Obtaining approval from ethics committees was considered crucial by 151 respondents for commencing CRISPR/Cas9 research. Interestingly, 63.3% showed eagerness for genetically modified plants and animals, while only 9% expressed interest in studies related to eternal youth. Additionally, 88% found gene editing studies conflicting with their beliefs. Conclusions: CRISPR/Cas9 holds great promise for biomedicine and healthcare but necessitates enhanced public awareness and informed decision-making. The study highlights the importance of promoting informed discussions on the ethical implications of CRISPR/Cas9 to address the concerns and perceptions of various demographics. These valuable insights contribute to the ongoing discourse on the impact of CRISPR/Cas9 on society.

Leveraging QM/MM and Molecular Dynamics Simulations to Decipher the Reaction Mechanism of the Cas9 HNH Domain to Investigate Off-Target Effects.

The clustered regularly interspaced short palindromic repeats (CRISPR) technology is an RNA-guided targeted genome-editing tool using Cas family proteins. Two magnesium-dependent nuclease domains of the Cas9 enzyme, termed HNH and RuvC, are responsible for cleaving the target DNA (t-DNA) and nontarget DNA strands, respectively. The HNH domain is believed to determine the DNA cleavage activity of both endonuclease domains and is sensitive to complementary RNA-DNA base pairing. However, the underlying molecular mechanisms of CRISPR-Cas9, by which it rebukes or accepts mismatches, are poorly understood. Thus, investigation of the structure and dynamics of the catalytic state of Cas9 with either matched or mismatched t-DNA can provide insights into improving its specificity by reducing off-target cleavages. Here, we focus on a recently discovered catalytic-active form of the Streptococcus pyogenes Cas9 (SpCas9) and employ classical molecular dynamics and coupled quantum mechanics/molecular mechanics simulations to study two possible mechanisms of t-DNA cleavage reaction catalyzed by the HNH domain. Moreover, by designing a mismatched t-DNA structure called MM5 (C to G at the fifth position from the protospacer adjacent motif region), the impact of single-guide RNA (sgRNA) and t-DNA complementarity on the catalysis process was investigated. Based on these simulations, our calculated binding affinities, minimum energy paths, and analysis of catalytically important residues provide atomic-level details of the differences between matched and mismatched cleavage reactions. In addition, several residues exhibit significant differences in their catalytic roles for the two studied systems, including K253, K263, R820, K896, and K913.

CRISPR-Cas9 Technology and its Impact on Plant Biology

CRISPR-Cas9 technology has emerged as a powerful tool for precise genome editing, revolutionizing various fields including plant biology. This abstract explores the impact of CRISPR-Cas9 on plant biology, focusing on its applications, challenges, and prospects. The versatility of CRISPR-Cas9 enables targeted modifications in plant genomes, facilitating crop improvement, nutritional enhancement, environmental adaptation, and bioremediation. By editing specific genes associated with desired traits, researchers can develop crops with increased yields, resistance to pests and diseases, and enhanced nutritional content. Moreover, CRISPR-Cas9 offers opportunities to engineer plants capable of thriving in changing environmental conditions and participating in environmental efforts. Despite its immense potential, CRISPR-Cas9 technology raises ethical, regulatory, and safety concerns. Addressing issues related to GMOs, environmental impacts, and off-target effects is crucial for the responsible and sustainable application of gene editing in plant biology, CRISPR-Cas9 technology holds promise for transforming agriculture and addressing global food security challenges. By navigating ethical and regulatory frameworks, researchers can harness its potential to create resilient, nutritious, and environmentally sustainable crops for future generations.

CRISPR-Cas Technology as a Revolutionary Genome Editing tool: Mechanisms and Biomedical Applications.

Programmable nucleases are powerful genomic tools for precise genome editing. These tools precisely recognize, remove, or change DNA at a defined site, thereby, stimulating cellular DNA repair pathways that can cause mutations or accurate replacement or deletion/insertion of a sequence. CRISPR-Cas9 system is the most potent and useful genome editing technique adapted from the defense immune system of certain bacteria and archaea against viruses and phages. In the past decade, this technology made notable progress, and at present, it has largely been used in genome manipulation to make precise gene editing in plants, animals, and human cells. In this review, we aim to explain the basic principle, mechanisms of action, and applications of this system in different areas of medicine, with emphasizing on the detection and treatment of parasitic diseases.

CRISPR/Cas9 Editing Sites Identification and Multi-Elements Association Analysis in Camellia sinensis.

CRISPR/Cas9 is an efficient genome-editing tool, and the identification of editing sites and potential influences in the Camellia sinensis genome have not been investigated. In this study, bioinformatics methods were used to characterise the Camellia sinensis genome including editing sites, simple sequence repeats (SSRs), G-quadruplexes (GQ), gene density, and their relationships. A total of 248,134,838 potential editing sites were identified in the genome, and five PAM types, AGG, TGG, CGG, GGG, and NGG, were observed, of which 66,665,912 were found to be specific, and they were present in all structural elements of the genes. The characteristic region of high GC content, GQ density, and PAM density in contrast to low gene density and SSR density was identified in the chromosomes in the joint analysis, and it was associated with secondary metabolites and amino acid biosynthesis pathways. CRISPR/Cas9, as a technology to drive crop improvement, with the identified editing sites and effector elements, provides valuable tools for functional studies and molecular breeding in Camellia sinensis.

An emerging role of heterotrimeric G-proteins in nodulation and nitrogen sensing.

A comprehensive understanding of nitrogen signaling cascades involving heterotrimeric G-proteins and their putative receptors can assist in the production of nitrogen-efficient plants. Plants are immobile in nature, so they must endure abiotic stresses including nutrient stress. Plant development and agricultural productivity are frequently constrained by the restricted availability of nitrogen in the soil. Non-legume plants acquire nitrogen from the soil through root membrane-bound transporters. In depleted soil nitrogen conditions, legumes are naturally conditioned to fix atmospheric nitrogen with the aid of nodulation elicited by nitrogen-fixing bacteria. Moreover, apart from the symbiotic nitrogen fixation process, nitrogen uptake from the soil can also be a significant secondary source to satisfy the nitrogen requirements of legumes. Heterotrimeric G-proteins function as molecular switches to help plant cells relay diverse stimuli emanating from external stress conditions. They are comprised of Gα, Gβ and Gγ subunits, which cooperate with several downstream effectors to regulate multiple plant signaling events. In the present review, we concentrate on signaling mechanisms that regulate plant nitrogen nutrition. Our review highlights the potential of heterotrimeric G-proteins, together with their putative receptors, to assist the legume root nodule symbiosis (RNS) cascade, particularly during calcium spiking and nodulation. Additionally, the functions of heterotrimeric G-proteins in nitrogen acquisition by plant roots as well as in improving nitrogen use efficiency (NUE) have also been discussed. Future research oriented towards heterotrimeric G-proteins through genome editing tools can be a game changer in the enhancement of the nitrogen fixation process. This will foster the precise manipulation and production of plants to ensure global food security in an era of climate change by enhancing crop productivity and minimizing reliance on external inputs.

Development of New Genome Editing Tools for the Treatment of Hyperlipidemia.

Hyperlipidemia is a medical condition characterized by high levels of lipids in the blood. It is often associated with an increased risk of cardiovascular diseases such as heart attacks and strokes. Traditional treatment approaches for hyperlipidemia involve lifestyle modifications, dietary changes, and the use of medications like statins. Recent advancements in genome editing technologies, including CRISPR-Cas9, have opened up new possibilities for the treatment of this condition. This review provides a general overview of the main target genes involved in lipid metabolism and highlights the progress made during recent years towards the development of new treatments for dyslipidemia.

Embryonic microinjection of ribonucleoprotein complex (Cas9+sgRNA) of whitegene in melon fly, Zeugodacuscucurbitae (Coquillett) (Diptera: Tephritidae) produced whiteeye phenotype.

Melon fly, Zeugodacus cucurbitae (Coquillett) is a major pest of cucurbitaceous crops, and causes substantial yield losses and economic costs. CRISPR/Cas9 is a rapid and effective site-specific genome editing tool for the generation of genetic changes that are stable and heritable. The CRISPR/Cas9 tool uses synthetically designed single guide RNA (sgRNA) that is complementary to the target gene and guides the Cas9 enzyme to perform nuclease activity by making double-strand breaks in the target DNA sequences. This tool can be effectively exploited to improve traits critical for the management of insect pests by targeting specific genes encoding these traits without the need of extensive genetic information. The white gene is an important gene responsible for the transport of body pigment precursor molecules. In this study, we produced effective mutagenesis of the white gene of Z. cucurbitae using the CRISPR/Cas9 tool with double sgRNAto target multiple sites of white to increase the efficiency in the generation of frame-shift mutations resulting in the white eye phenotype in adults. This was achieved through embryonic microinjection of the ribonucleoprotein (RNP) complex in the pre-blastoderm embryo stage 1 h after embryo laying. Our success with the production of a white eye mutant fly by CRISPR/Cas9 mutagenesis is important for the research on gene function and protein-level modifications in melon fly and forms the basis for the development of new genetic control strategies such as precision guided sterile insect technique (pgSIT) for this pest of economic significance.

Hs1Cas12a and Ev1Cas12a confer efficient genome editing in plants.

Cas12a, also known as Cpf1, is a highly versatile CRISPR-Cas enzyme that has been widely used in genome editing. Unlike its well-known counterpart, Cas9, Cas12a has unique features that make it a highly efficient genome editing tool at AT-rich genomic regions. To enrich the CRISPR-Cas12a plant genome editing toolbox, we explored 17 novel Cas12a orthologs for their genome editing capabilities in plants. Out of them, Ev1Cas12a and Hs1Cas12a showed efficient multiplexed genome editing in rice and tomato protoplasts. Notably, Hs1Cas12a exhibited greater tolerance to lower temperatures. Moreover, Hs1Cas12a generated up to 87.5% biallelic editing in rice T0 plants. Both Ev1Cas12a and Hs1Cas12a achieved effective editing in poplar T0 plants, with up to 100% of plants edited, albeit with high chimerism. Taken together, the efficient genome editing demonstrated by Ev1Cas12a and Hs1Cas12a in both monocot and dicot plants highlights their potential as promising genome editing tools in plant species and beyond.

Two different types of tandem sequences mediate the overexpression of TinCYP51B in azole-resistant Trichophyton indotineae.

Trichophyton indotineae is an emerging dermatophyte that causes severe tinea corporis and tinea cruris. Numerous cases of terbinafine- and azole-recalcitrant T. indotineae-related dermatophytosis have been observed in India over the past decade, and cases are now being recorded worldwide. Whole genome sequencing of three azole-resistant strains revealed a variable number of repeats of a 2,404 base pair (bp) sequence encoding TinCYP51B in tandem specifically at the CYP51B locus position. However, many other resistant strains (itraconazole MIC ≥0.25 µg/mL; voriconazole MIC ≥0.25 µg/mL) did not contain such duplications. Whole-genome sequencing of three of these strains revealed a variable number of 7,374 bp tandem repeat blocks harboring TinCYP51B. Consequently, two types of T. indotineae azole-resistant strains were found to host TinCYP51B in tandem sequences (type I with 2,404 bp TinCYP51B blocks and type II with 7,374 bp TinCYP51B blocks). Using the CRISPR/Cas9 genome-editing tool, the copy number of TinCYP51B within the genome of types I and II strains was brought back to a single copy. The azole susceptibility of these modified strains was similar to that of strains without TinCYP51B duplication, showing that azole resistance in T. indotineae strains is mediated by one of two types of TinCYP51B amplification. Type II strains were prevalent among 32 resistant strains analyzed using a rapid and reliable PCR test.

How genome editing changed the world of large animal research.

The first genetically modified large animals were developed in 1985 by microinjection to increase the growth of agricultural livestock such as pigs. Since then, it has been a difficult trail due to the lack of genetic tools. Although methods and technologies were developed quickly for the main experimental mammal, the mouse, e.g., efficient pronuclear microinjection, gene targeting in embryonic stem cells, and omics data, most of it was-and in part still is-lacking when it comes to livestock. Over the next few decades, progress in genetic engineering of large animals was driven less by research for agriculture but more for biomedical applications, such as the production of pharmaceutical proteins in the milk of sheep, goats, or cows, xeno-organ transplantation, and modeling human diseases. Available technologies determined if a desired animal model could be realized, and efficiencies were generally low. Presented here is a short review of how genome editing tools, specifically CRISPR/Cas, have impacted the large animal field in recent years. Although there will be a focus on genome engineering of pigs for biomedical applications, the general principles and experimental approaches also apply to other livestock species or applications.

Targeted knockout of a conserved plant mitochondrial gene by genome editing

Fusion proteins derived from transcription activator-like effectors (TALEs) have emerged as genome editing tools for mitochondria. TALE nucleases (TALENs) have been applied to delete chimaeric reading frames and duplicated (redundant) genes but produced complex genomic rearrangements due to the absence of non-homologous end-joining. Here we report the targeted deletion of a conserved mitochondrial gene, nad9, encoding a subunit of respiratory complex I. By generating a large number of TALEN-mediated mitochondrial deletion lines, we isolated, in addition to mutants with rearranged genomes, homochondriomic mutants harbouring clean nad9 deletions. Characterization of the knockout plants revealed impaired complex I biogenesis, male sterility and defects in leaf and flower development. We show that these defects can be restored by expressing a functional Nad9 protein from the nuclear genome, thus creating a synthetic cytoplasmic male sterility system. Our data (1) demonstrate the feasibility of using genome editing to study mitochondrial gene functions by reverse genetics, (2) highlight the role of complex I in plant development and (3) provide proof-of-concept for the construction of synthetic cytoplasmic male sterility systems for hybrid breeding by genome editing.