General Base Catalyst Research Articles

The mechanism of papain inhibition by peptidyl aldehydes

Various mechanisms for the reversible formation of a covalent tetrahedral complex (TC) between papain and peptidyl aldehyde inhibitors were simulated by DFT calculations, applying the quantum mechanical/self consistent reaction field (virtual solvent) [QM/SCRF(VS)] approach. Only one mechanism correlates with the experimental kinetic data. The His-Cys catalytic diad is in an N/SH protonation state in the noncovalent papain-aldehyde Michaelis complex. His159 functions as a general base catalyst, abstracting a proton from the Cys25, whereas the activated thiolate synchronously attacks the inhibitor's carbonyl group. The final product of papain inhibition is the protonated neutral form of the hemithioacetal TC(OH), in agreement with experimental data. The predicted activation barrier g enz≠ = 5.2 kcal mol⁻¹ is close to the experimental value of 6.9 kcal mol⁻¹. An interpretation of the experimentally observed slow binding effect for peptidyl aldehyde inhibitors is presented. The calculated g cat≠ is much lower than the rate determining activation barrier of hemithioacetal formation in water, g w≠, in agreement with the concept that the preorganized electrostatic environment in the enzyme active site is the driving force of enzyme catalysis. We have rationalized the origin of the acidic and basic pK(a)'s on the k₂/K(S) versus pH bell-shaped profile of papain inhibition by peptidyl aldehydes.

Concerted SN2 mechanism for the hydrolysis of acid chlorides: comparisons of reactivities calculated by the density functional theory with experimental data

AbstractDFT computations have been performed in acetone and water solvents in order to investigate the mechanism of hydrolysis of acid chlorides. Acetyl chloride and chloroacetyl chloride hydrolyze via concerted, one‐step SN2 mechanism, with the attack of water at the sp2 hybridized carbon atom of the CO group, and the transition state (TS) has distorted tetrahedral geometry. Solvent molecules act as general base and general acid catalysts. The TS of chloroacetyl chloride is tighter and less polar than the TS of acetyl chloride. The structure of the SN2 TS for the hydrolysis of benzoyl chlorides changes with the substituents and the solvent. Tight and loose TSs are formed for substrates bearing electron withdrawing (e‐w) and electron donating (e‐d) groups, respectively. In acetone, only the e‐w effect of the substituents increase the reactivity of the substrates, and the change of the structure of the TSs with the substituents is small. In water, polar and very loose TSs are formed in the reactions of benzoyl chlorides bearing e‐d substituents, and the rate enhancing effect of both e‐d and e‐w groups can be computed at higher level of theory. Calculated reactivities and the changes of the structure of the TSs with substituents and solvent are in accordance with the results of kinetic studies. In SN2 nucleophilic substitutions late/early TSs are formed if the attacking reagent is poorer/better nucleophile than the leaving group, and loose/tight TSs are formed for substrates bearing e‐d/e‐w substituents and in protic/aprotic solvents. Copyright © 2010 John Wiley & Sons, Ltd.

A non‐enzymatic model based on an acyl transfer reaction for the formation of energy‐rich acetyl phosphate in organic solvents and in a biphasic system

AbstractThe formation of acetyl phosphate (AcP), an energy‐rich phosphate compound, was studied through the reaction of 2,4‐dinitrophenyl acetate with H2PO solubilized with Kryptofix® 222 or as a tetra‐n‐butylammonium ((n‐C4H9)4N+) salt in organic media. The results indicated that the rate of the reaction in acetonitrile is strongly inhibited by the addition of water, suggesting that the water added to the medium preferentially solvates the H2PO anion, inhibiting its action as a nucleophile and allowing it to act as a general base catalyst, which leads to the hydrolysis of the ester. The utilization of various organic solvents in the acetyl transfer process demonstrated that the specific interaction of the solvent with water accelerates the process, by desolvation of H2PO, which can act as a nucleophile. Finally, a formation/transformation cycle of AcP was studied in a biphasic system (water/CH2Cl2) using Kryptofix® 222 and (n‐C4H9)4N+BF as both the carrier and solubilizing agent for KH2PO4. Copyright © 2010 John Wiley & Sons, Ltd.

The mechanisms of hydrolysis of N‐alkyl O‐arylthioncarbamate esters

AbstractThe hydrolysis of N‐ethyl O‐p‐methoxyphenylthioncarbamate (EMeOT) at 50 °C was studied in the range of $H_o^X $ −3.6 to H− 13.7. The pH‐rate profile showed that the hydrolysis occurred through specific acid catalysis at pH <2, spontaneous hydrolysis at pH 2–3, and specific basic catalysis at pH >3. The excess acidity plot against X was linear with slope 0.93, and the Bunnett–Olsen coefficient was 0.07. The acid hydrolysis occurred by an A1 mechanism. The basic hydrolysis of EMeOT can be explained if the mechanism is E1cb. At pH >3 the rate constants increased, reaching a constant value indicating that the expulsion of the aryloxy is not concerted. The neutral species hydrolyzed with general base catalysis with Brønsted β = 0.63 ± 0.07. Water acted as a general base catalyst with (pseudo‐) first‐order rate constant kN = (2.6 ± 0.2) × 10−8 s−1, and inverse kinetic solvent isotope effect of $k_o^D /k_o^H = 2.76$ consistent with a transfer of the proton at a late transition state, as also supported by the highly negative entropy of activation (−31 cal K−1 mol−1). The polynomial expression of the proton inventory curve presented a minimum of the standard deviations that favors the assumption that there are three active protons. The N to O proton transfer to the water molecule forms an incipient hydron. The fractionation factor of the TS of the protons indicated that the hydron is ca. 68% developed at the transition state. Copyright © 2010 John Wiley & Sons, Ltd.

Extensive molecular dynamics simulations showing that canonical G8 and protonated A38H+ forms are most consistent with crystal structures of hairpin ribozyme.

The hairpin ribozyme is a prominent member of the group of small catalytic RNAs (RNA enzymes or ribozymes) because it does not require metal ions to achieve catalysis. Biochemical and structural data have implicated guanine 8 (G8) and adenine 38 (A38) as catalytic participants in cleavage and ligation catalyzed by the hairpin ribozyme, yet their exact role in catalysis remains disputed. To gain insight into dynamics in the active site of a minimal self-cleaving hairpin ribozyme, we have performed extensive classical, explicit-solvent molecular dynamics (MD) simulations on time scales of 50-150 ns. Starting from the available X-ray crystal structures, we investigated the structural impact of the protonation states of G8 and A38, and the inactivating A-1(2'-methoxy) substitution employed in crystallography. Our simulations reveal that a canonical G8 agrees well with the crystal structures while a deprotonated G8 profoundly distorts the active site. Thus MD simulations do not support a straightforward participation of the deprotonated G8 in catalysis. By comparison, the G8 enol tautomer is structurally well tolerated, causing only local rearrangements in the active site. Furthermore, a protonated A38H(+) is more consistent with the crystallography data than a canonical A38. The simulations thus support the notion that A38H(+) is the dominant form in the crystals, grown at pH 6. In most simulations, the canonical A38 departs from the scissile phosphate and substantially perturbs the structures of the active site and S-turn. Yet, we occasionally also observe formation of a stable A-1(2'-OH)...A38(N1) hydrogen bond, which documents the ability of the ribozyme to form this hydrogen bond, consistent with a potential role of A38 as general base catalyst. The presence of this hydrogen bond is, however, incompatible with the expected in-line attack angle necessary for self-cleavage, requiring a rapid transition of the deprotonated 2'-oxyanion to a position more favorable for in-line attack after proton transfer from A-1(2'-OH) to A38(N1). The simulations revealed a potential force field artifact, occasional but irreversible formation of "ladder-like", underwound A-RNA structure in one of the external helices. Although it does not affect the catalytic center of the hairpin ribozyme, further studies are under way to better assess possible influence of such force field behavior on long RNA simulations.

Modulating the pH−Activity Profile of Cellulase by Substitution: Replacing the General Base Catalyst Aspartate with Cysteinesulfinate in Cellulase A from Cellulomonas fimi

Cellulase A (CenA) from Cellulomonas fimi is an inverting glycoside hydrolase and a member of family 6 of the CAZy database classification system. We replaced its putative catalytic base aspartyl residues, Aps392 and Asp216, with cysteinesulfinate using a combination of site-directed mutagenesis and chemical modification to investigate the applicability of this approach for the modulation of enzymatic properties. The substituted cysteinyl residues were oxidized to cysteinesulfinic acid with hydrogen peroxide, and the resulting protein products were demonstrated to retain their native structure. Oxidation of the Asp392Cys mutant enzyme restored 52% of wild-type activity when assessed at pH 7.5, whereas Asp216Cys CenA remained inactive. This suggests that Asp216 is not the catalytic base and provides further support for Asp392 performing this role. Similar substitution of the catalytic acid residue Asp252 or the catalytic nucleophile of the retaining enzyme Cel5A from Thermobifida fusca failed to produce active enzymes. This indicates a potential utility of this approach for uniquely identifying catalytic base residues. The replacement of Asp392 with cysteinesulfinate induced an acidic shift in the pH profile of the enzyme such that this enzyme derivative was more active than wild-type CenA below pH 5.5. These data demonstrate the potential of combining site-directed mutagenesis with chemical modification as a viable approach for the modulation of cellulases, and potentially other glycoside hydrolases, at low pH.

Structure and Mechanism of the glmS Ribozyme

The self-cleaving glmS ribozyme is a mechanistically unique functional RNA among both riboswitches and RNA catalysts as its catalytic activity provides the basis of genetic regulation and depends upon glucosamine-6-phosphate (GlcN6P) as a coenzyme. A substantial body of biochemical and biophysical data relating the structure and function of the glmS ribozyme has been amassed, in our laboratory and others, in a relatively short period of time since its discovery. However, a precise and comprehensive mechanistic understanding of coenzyme function in glmS ribozyme self-cleavage has not been elaborated. Careful consideration of the available biochemical and biophysical data relating the structure and function of the glmS ribozyme necessitates that general acid and general base catalysis in a coenzyme-dependent active site mechanism of RNA cleavage are inherently interdependent. We propose a comprehensive mechanistic model wherein the coenzyme, GlcN6P, functions both as the initial general base catalyst and consequent general acid catalyst within a proton-relay thus fulfilling the apparent biochemical requirements for activity. This analysis in combination with other considerations regarding the effects of coenzyme binding on riboswitch structure and function suggests that the development of glmS ribozyme agonists as prospective antibiotic compounds must satisfy strict chemical requirements for binding and activity.

Alteration of the Diastereoselectivity of 3‐Methylaspartate Ammonia Lyase by Using Structure‐Based Mutagenesis

3-Methylaspartate ammonia-lyase (MAL) catalyzes the reversible amination of mesaconate to give both (2S,3S)-3-methylaspartic acid and (2S,3R)-3-methylaspartic acid as products. The deamination mechanism of MAL is likely to involve general base catalysis, in which a catalytic base abstracts the C3 proton of the respective stereoisomer to generate an enolate anion intermediate that is stabilized by coordination to the essential active-site Mg(II) ion. The crystal structure of MAL in complex with (2S,3S)-3-methylaspartic acid suggests that Lys331 is the only candidate in the vicinity that can function as a general base catalyst. The structure of the complex further suggests that two other residues, His194 and Gln329, are responsible for binding the C4 carboxylate group of (2S,3S)-3-methylaspartic acid, and hence are likely candidates to assist the Mg(II) ion in stabilizing the enolate anion intermediate. In this study, the importance of Lys331, His194, and Gln329 for the activity and stereoselectivity of MAL was investigated by site-directed mutagenesis. His194 and Gln329 were replaced with either an alanine or arginine, whereas Lys331 was mutated to a glycine, alanine, glutamine, arginine, or histidine. The properties of the mutant proteins were investigated by circular dichroism (CD) spectroscopy, kinetic analysis, and (1)H NMR spectroscopy. The CD spectra of all mutants were comparable to that of wild-type MAL, and this indicates that these mutations did not result in any major conformational changes. Kinetic studies demonstrated that the mutations have a profound effect on the values of k(cat) and k(cat)/K(M); this implicates Lys331, His194 and Gln329 as mechanistically important. The (1)H NMR spectra of the amination and deamination reactions catalyzed by the mutant enzymes K331A, H194A, and Q329A showed that these mutants have strongly enhanced diastereoselectivities. In the amination direction, they catalyze the conversion of mesaconate to yield only (2S,3S)-3-methylaspartic acid, with no detectable formation of (2S,3R)-3-methylaspartic acid. The results are discussed in terms of a mechanism in which Lys331, His194, and Gln329 are involved in positioning the substrate and in formation and stabilization of the enolate anion intermediate.

Catalytic Mechanism of SHCHC Synthase in the Menaquinone Biosynthesis of Escherichia coli: Identification and Mutational Analysis of the Active Site Residues

(1R,6R)-2-Succinyl-6-hydroxy-2,4-cyclohexadiene-1-carboxylate (SHCHC) synthase (MenH) is an alpha/beta fold enzyme containing a catalytically essential serine-histidine-aspartate triad typical of serine proteases but catalyzes a pyruvate elimination reaction initiated by alpha-proton abstraction in the menaquinone biosynthetic pathway of Escherichia coli. In this study, we identify the active site residues in the synthase through sequence analysis and structural modeling and study their mechanistic roles in MenH catalysis. Steady-state kinetic characterization of site-directed mutants of the active site residues shows that three conserved arginine residues (Arg-90, Arg-124, and Arg-168) likely form ionic salt bridges with three carboxylate groups of the substrate in the Michaelis complex and that the side-chain polar groups of the conserved tyrosine (Tyr-85) and tryptophan (Trp-147) residues likely donate hydrogen bonds to form an "oxyanion hole". In addition, the pH dependence of the MenH kinetic properties reveals a catalytic base with a pK(a) highly dependent on the hydroxyl group of the triad serine residue in the enzymatic reaction. Moreover, proton inventory experiments demonstrate that the SHCHC synthase adopts one-proton catalysis like many serine proteases. These results allow the proposal of a mechanism in which the histidine residue of the MenH triad serves as a general base catalyst to deprotonate the triad seryl hydroxyl group in the alpha-proton abstraction from the substrate. As such, the MenH triad performs a simple and fundamental proton transfer reaction occurring repeatedly in the reactions catalyzed by serine proteases and alpha/beta fold hydrolases, suggesting a common evolutionary origin for all serine-histidine-aspartate triads serving different catalytic functions.

Probing General Acid Catalysis in the Hammerhead Ribozyme

Recent crystallographic and computational studies have provided fresh insights into the catalytic mechanism of the RNA-cleaving hammerhead ribozyme. Based on these findings, specific ribozyme functional groups have been hypothesized to act directly as the general acid and base catalysts, although the catalytic role of divalent metal cations (M(2+)) remains uncertain. We now report a functional characterization of the general acid catalysis mechanism and the role of an M(2+) cofactor therein, for the S. mansoni hammerhead (an "extended" hammerhead ribozyme). We have compared hammerhead cleavage of substrates with natural (ribo-phosphodiester) versus bridging-5'-phosphorothioate scissile linkages, in the contexts of active site mutations and M(2+) substitution. Cleavage of the natural substrate is inhibited by modification of the G8 2'-OH ribozyme residue and depends strongly upon the presence and identity of an M(2+) cofactor; in contrast, cleavage of the bridging-phosphorothioate substrate is conspicuously insensitive to any of these factors. These results imply that (1) both an M(2+) cofactor and the G8 2'-OH play crucial roles in hammerhead general acid catalysis and (2) the M(2+) cofactor does not contribute to general acid catalysis via Lewis acid stabilization of the leaving group. General acid pK(a) perturbation was also demonstrated for both M(2+) substitution and G8 2'-OH modification, which suggests transition state M(2+) coordination of the G8 2'-OH, to lower its pK(a) and improve its ability to transfer a proton to the leaving group. We also report a simple method for synthesizing radiolabeled bridging-5'-phosphorothioate substrates.

Quantum Mechanical/Molecular Mechanical Simulation Study of the Mechanism of Hairpin Ribozyme Catalysis

The molecular mechanism of hairpin ribozyme catalysis is studied with molecular dynamics simulations using a combined quantum mechanical and molecular mechanical (QM/MM) potential with a recently developed semiempirical AM1/d-PhoT model for phosphoryl transfer reactions. Simulations are used to derive one- and two-dimensional potentials of mean force to examine specific reaction paths and assess the feasibility of proposed general acid and base mechanisms. Density-functional calculations of truncated active site models provide complementary insight to the simulation results. Key factors utilized by the hairpin ribozyme to enhance the rate of transphosphorylation are presented, and the roles of A38 and G8 as general acid and base catalysts are discussed. The computational results are consistent with available experimental data, provide support for a general acid/base mechanism played by functional groups on the nucleobases, and offer important insight into the ability of RNA to act as a catalyst without explicit participation by divalent metal ions.

Catalytic Mechanism of Cyclic Di-GMP-Specific Phosphodiesterase: a Study of the EAL Domain-Containing RocR fromPseudomonas aeruginosa

EAL domain proteins are the major phosphodiesterases for maintaining the cellular concentration of second-messenger cyclic di-GMP in bacteria. Given the pivotal roles of EAL domains in the regulation of many bacterial behaviors, the elucidation of their catalytic and regulatory mechanisms would contribute to the effort of deciphering the cyclic di-GMP signaling network. Here, we present data to show that RocR, an EAL domain protein that regulates the expression of virulence genes and biofilm formation in Pseudomonas aeruginosa PAO-1, catalyzes the hydrolysis of cyclic di-GMP by using a general base-catalyzed mechanism with the assistance of Mg(2+) ion. In addition to the five essential residues involved in Mg(2+) binding, we propose that the essential residue E(352) functions as a general base catalyst assisting the deprotonation of Mg(2+)-coordinated water to generate the nucleophilic hydroxide ion. The mutation of other conserved residues caused various degree of changes in the k(cat) or K(m), leading us to propose their roles in residue positioning and substrate binding. With functions assigned to the conserved groups in the active site, we discuss the molecular basis for the lack of activity of some characterized EAL domain proteins and the possibility of predicting the phosphodiesterase activities for the vast number of EAL domains in bacterial genomes in light of the catalytic mechanism.

Role of Mg2+ in Hammerhead Ribozyme Catalysis from Molecular Simulation

Molecular dynamics simulations have been performed to investigate the role of Mg2+ in the full-length hammerhead ribozyme cleavage reaction. In particular, the aim of this work is to characterize the binding mode and conformational events that give rise to catalytically active conformations and stabilization of the transition state. Toward this end, a series of eight 12 ns molecular dynamics simulations have been performed with different divalent metal binding occupations for the reactant, early and late transition state using recently developed force field parameters for metal ions and reactive intermediates in RNA catalysis. In addition, hybrid QM/MM calculations of the early and late transition state were performed to study the proton-transfer step in general acid catalysis that is facilitated by the catalytic Mg2+ ion. The simulations suggest that Mg2+ is profoundly involved in the hammerhead ribozyme mechanism both at structural and catalytic levels. Binding of Mg2+ in the active site plays a key structural role in the stabilization of stem I and II and to facilitate formation of near attack conformations and interactions between the nucleophile and G12, the implicated general base catalyst. In the transition state, Mg2+ binds in a bridging position where it stabilizes the accumulated charge of the leaving group while interacting with the 2'OH of G8, the implicated general acid catalyst. The QM/MM simulations provide support that, in the late transition state, the 2'OH of G8 can transfer a proton to the leaving group while directly coordinating the bridging Mg2+ ion. The present study provides evidence for the role of Mg2+ in hammerhead ribozyme catalysis. The proposed simulation model reconciles the interpretation of available experimental structural and biochemical data, and provides a starting point for more detailed investigation of the chemical reaction path with combined QM/MM methods.

Structure and Mechanism of the Genomically Encoded Fosfomycin Resistance Protein, FosX, from Listeria monocytogenes,

The fosfomycin resistance protein, FosX, catalyzes the hydration of the antibiotic fosfomycin, (1R,2S)-epoxypropylphosphonic acid. Genes encoding the enzyme are found in several pathogenic microorganisms. The structure and mechanism of action of the genomically encoded FosX enzyme from Listeria monocytogenes (FosXLMATCC) obtained from the American Type Culture Collection are reported. The gene harbors 31 point mutations, and as a consequence, the protein differs in 10 amino acid residues from the previously reported FosX encoded in the genome of the EGD strain of L. monocytogenes (FosXLMEGD). The FosXLMATCC enzyme is shown to catalyze the addition of water to the C1 position of the antibiotic with inversion of configuration at C1. The reaction involves Mn(II) activation of the oxirane oxygen and E44 acting as a general base. The structure of the enzyme has been determined from six different crystal forms of the protein. The structures of the enzyme without metal bound are similar but differ in the loop regions. Perhaps the most informative structure is the one with the product bound. This structure shows that the phosphonate group of the product is bound in an orientation that is different than that of fosfomycin bound to the related enzyme, FosA. The implication is that the substrate may also be bound in a different orientation in FosX. A high-resolution structure (1.44 A resolution) of the enzyme reveals a unique conformation in which the C-terminal tail of the protein coordinates to the Mn(II) center via the carboxylate of E126. The kinetic characterization of the E126Q mutant indicates that this conformation of the protein is probably not relevant to the function of the enzyme. Kinetic analysis of mutants of active site residue E44 is consistent with its proposed roll as a general base catalyst in the addition of water to the antibiotic.

Structural Basis of the Catalytic Reaction Mechanism of Novel 1,2-α-L-Fucosidase from Bifidobacterium bifidum

1,2-alpha-L-fucosidase (AfcA), which hydrolyzes the glycosidic linkage of Fucalpha1-2Gal via an inverting mechanism, was recently isolated from Bifidobacterium bifidum and classified as the first member of the novel glycoside hydrolase family 95. To better understand the molecular mechanism of this enzyme, we determined the x-ray crystal structures of the AfcA catalytic (Fuc) domain in unliganded and complexed forms with deoxyfuconojirimycin (inhibitor), 2'-fucosyllactose (substrate), and L-fucose and lactose (products) at 1.12-2.10 A resolution. The AfcA Fuc domain is composed of four regions, an N-terminal beta region, a helical linker, an (alpha/alpha)6 helical barrel domain, and a C-terminal beta region, and this arrangement is similar to bacterial phosphorylases. In the complex structures, the ligands were buried in the central cavity of the helical barrel domain. Structural analyses in combination with mutational experiments revealed that the highly conserved Glu566 probably acts as a general acid catalyst. However, no carboxylic acid residue is found at the appropriate position for a general base catalyst. Instead, a water molecule stabilized by Asn423 in the substrate-bound complex is suitably located to perform a nucleophilic attack on the C1 atom of L-fucose moiety in 2'-fucosyllactose, and its location is nearly identical near the O1 atom of beta-L-fucose in the products-bound complex. Based on these data, we propose and discuss a novel catalytic reaction mechanism of AfcA.

A Direct Substrate–Substrate Interaction Found in the Kinase Domain of the Bifunctional Enzyme, 6-Phosphofructo-2-kinase/Fructose-2,6-bisphosphatase

To understand the molecular basis of a phosphoryl transfer reaction catalyzed by the 6-phosphofructo-2-kinase domain of the hypoxia-inducible bifunctional enzyme 6-phosphofructo-2-kinase/fructose-2,6-bisphosphatase (PFKFB3), the crystal structures of PFKFB3 AMPPCP fructose-6-phosphate and PFKFB3 ADP phosphoenolpyruvate complexes were determined to 2.7 Å and 2.25 Å resolution, respectively. Kinetic studies on the wild-type and site-directed mutant proteins were carried out to confirm the structural observations. The experimentally varied liganding states in the active pocket cause no significant conformational changes. In the pseudo-substrate complex, a strong direct interaction between AMPPCP and fructose-6-phosphate (Fru-6-P) is found. By virtue of this direct substrate–substrate interaction, Fru-6-P is aligned with AMPPCP in an orientation and proximity most suitable for a direct transfer of the γ-phosphate moiety to 2-OH of Fru-6-P. The three key atoms involved in the phosphoryl transfer, the β,γ-phosphate bridge oxygen atom, the γ-phosphorus atom, and the 2-OH group are positioned in a single line, suggesting a direct phosphoryl transfer without formation of a phosphoenzyme intermediate. In addition, the distance between 2-OH and γ-phosphorus allows the γ-phosphate oxygen atoms to serve as a general base catalyst to induce an “associative” phosphoryl transfer mechanism. The site-directed mutant study and inhibition kinetics suggest that this reaction will be catalyzed most efficiently by the protein when the substrates bind to the active pocket in an ordered manner in which ATP binds first.

The Rate Enhancement Produced by the Ribosome: An Improved Model

As a model for mechanistic comparison with peptidyl transfer within the ribosome, the reaction of aqueous glycinamide with N-formylphenylalanine trifluoroethyl ester (fPhe-TFE) represents an improvement over earlier model reactions involving Tris. The acidity of trifluoroethanol (pKa 12.4) resembles that of tRNA (12.98) more closely than do the acidities of model reactants described earlier, and the reactivity of the simple nucleophile glycinamide is free of potential complications that arise from alternative reaction pathways available to Tris. At 25 degrees C, the uncatalyzed reaction of glycinamide with fPhe-TFE proceeds with a second-order rate constant of 3 x 10(-5) M-1 s-1; DeltaH(++) = +7.8 kcal/mol; TDeltaS(++)= -15.7 kcal/mol. The ribosomal reaction of puromycin with fMet-tRNA proceeds 3 x 107-fold more rapidly, with a second-order rate constant (kcat/Km) of 1 x 10(3) M-1 s-1; DeltaH(++) = +16.0 kcal/mol; TDeltaS(++)= +2.0 kcal/mol. That rate enhancement, an order of magnitude larger than estimated earlier, is fully explained by the more favorable entropy of activation of the ribosomal reaction. Experiments involving ethylene glycol esters suggest that neighboring -OH group effects are negligible in the presence of solvent water, which itself acts as a general base catalyst. In the desolvated interior of the ribosome, the vicinal 2'-OH group of aminoacyl-tRNA probably replaces water as a general base catalyst. But the catalytic effect of the ribosome itself is overwhelmingly entropic in origin, suggesting that the ribosome achieves its effect by physical desolvation and/or juxtaposition of the reactants in a manner conducive to peptidyl transfer.

Mechanism of methanol oxidation by quinoprotein methanol dehydrogenase

At neutral pH, oxidation of CH(3)OH --> CH(2)O by an o-quinone requires general-base catalysis and the reaction is endothermic. The active-site -CO(2)(-) groups of Glu-171 and Asp-297 (Glu-171-CO(2)(-) and Asp-297-CO(2)(-)) have been considered as the required general base catalysts in the bacterial o-quinoprotein methanol dehydrogenase (MDH) reaction. Based on quantum mechanics/molecular mechanics (QM/MM) calculations, the free energy for MeOH reduction of o-PQQ when MeOH is hydrogen bonded to Glu-171-CO(2)(-) and the crystal water (Wat1) is hydrogen bonded to Asp-297-CO(2)(-) is DeltaG++ = 11.7 kcal/mol, which is comparable with the experimental value of 8.5 kcal/mol. The calculated DeltaG++ when MeOH is hydrogen bonded to Asp-297-CO(2)(-) is >50 kcal/mol. The Asp-297-CO(2)(-)...Wat1 complex is very stable. Molecular dynamics (MD) simulations on MDH.PQQ.Wat1 complex in TIP3P water for 5 ns does not result in interchange of Asp-297-CO(2)(-) bound Wat1 for a solvent water. Starting with Wat1 removed and MeOH hydrogen bonded to Asp-297-CO(2)(-), we find that MeOH returns to be hydrogen bonded to Glu-171-CO(2)(-) and Asp-297-CO(2)(-) coordinates to Ca(2+) during 3 ns simulation. The Asp-297-CO(2)(-)...Wat1 of reactant complex does play a crucial role in catalysis. By QM/MM calculation DeltaG++ = 1.1 kcal/mol for Asp-297-CO(2)(-) general-base catalysis of Wat1 hydration of the immediate CH(2)==O product --> CH(2)(OH)(2). By this means, the endothermic oxidation-reduction reaction is pulled such that the overall conversion of MeOH to CH(2)(OH)(2) is exothermic.

Crystal Structure of Unsaturated Glucuronyl Hydrolase Complexed with Substrate: MOLECULAR INSIGHTS INTO ITS CATALYTIC REACTION MECHANISM

Unsaturated glucuronyl hydrolase (UGL), which is a member of glycoside hydrolase family GH-88, is a bacterial enzyme that degrades mammalian glycosaminoglycans and bacterial biofilms. The enzyme, which acts on unsaturated oligosaccharides with an alpha-glycoside bond produced by microbial polysaccharide lyases responsible for bacterial invasion of host cells, was believed to release 4-deoxy-l-threo-5-hexosulose-uronate (unsaturated glucuronic acid, or DeltaGlcA) and saccharide with a new nonreducing terminus by hydrolyzing the glycosidic bond. We detail the crystal structures of wild-type inactive mutant UGL of Bacillus sp. GL1 and its complex with a substrate (unsaturated chondroitin disaccharide), identify active site residues, and postulate a reaction mechanism catalyzed by UGL that triggers the hydration of the vinyl ether group in DeltaGlcA, based on the structural analysis of the enzyme-substrate complex and biochemical analysis. The proposed catalytic mechanism of UGL is a novel case among known glycosidases. Under the proposed mechanism, Asp-149 acts as a general acid and base catalyst to protonate the DeltaGlcA C4 atom and to deprotonate the water molecule. The deprotonated water molecule attacks the DeltaGlcA C5 atom to yield unstable hemiketal; this is followed by spontaneous conversion to an aldehyde (4-deoxy-l-threo-5-hexosulose-uronate) and saccharide through hemiacetal formation and cleavage of the glycosidic bond. UGL is the first clarified alpha(6)/alpha(6)-barrel enzyme using aspartic acid as the general acid/base catalyst.

Deacylation Transition States of a Bacterial DD-Peptidase

Beta-lactam antibiotics restrict bacterial growth by inhibiting DD-peptidases. These enzymes catalyze the final transpeptidation step in bacterial cell wall biosynthesis. Although much structural information is now available for these enzymes, the mechanism of the actual transpeptidation reaction has not been studied in detail. The reaction is known to involve a double-displacement mechanism with an acyl-enzyme intermediate, which can be attacked by water, specific amino acids, peptides, and other acyl acceptors. We describe in this paper an investigation of acyl acceptor specificity and assess the need for general base catalysis in the deacylation transition state of the Streptomyces R61 DD-peptidase. We show, by the criterion of solvent deuterium kinetic isotope effect measurements and proton inventories, that the transition states of specific and nonspecific substrates are very similar, at least with respect to proton motion. The transition states for attack (tetrahedral intermediate formation) by d-amino acids and Gly-l-Xaa dipeptides do not include a general base catalyst, while such catalysis is essential for reaction with water and d-alpha-hydroxy acids. D-Alpha-hydroxy acids act as acyl acceptors for glycyl substrates but not for more specific d-alanyl substrates; hydroxy acids actually behave, more generally, as mixed inhibitors of the DD-peptidase. The structural and mechanistic bases of these observations are discussed; they should inform transition state analogue design.