Gellan Gum Hydrogels Research Articles

Effectiveness of collagen and gatifloxacin in improving the healing and antibacterial activities of gellan gum hydrogel films as dressing materials

The demand for advanced wound care products is rapidly increasing nowadays. In this study, gellan gum/collagen (GG/C) hydrogel films containing gatifloxacin (GAT) were developed to investigate their properties as wound dressing materials. ATR-FTIR, swelling, water content, water vapor transmission rate (WVTR), and thermal properties were investigated. The mechanical properties of the materials were tested in dry and wet conditions to understand the performance of the materials after exposure to wound exudate. Drug release by Franz diffusion was measured with all samples showing 100 % cumulative drug release after 40 min. Strong antibacterial activities against Staphylococcus aureus and Staphylococcus epidermis were observed for Gram-positive bacteria, while Escherichia coli and Pseudomonas aeruginosa were observed for Gram-negative bacteria. The in-vivo cytotoxicity of GG/C-GAT was assessed by wound contraction in rats, which was 95 % for GG/C-GAT01. Hematoxylin and eosin and Masson's trichrome staining revealed the appearance of fresh full epidermis and granulation tissue, indicating that all wounds had passed through the proliferation phase. The results demonstrate the promising properties of the materials to be used as dressing materials.

Gellan gum-based hydrogels support the recreation of the dermal papilla microenvironment

The dermal papilla (DP), a specialized compartment within the hair follicle, regulates hair growth. However, human DP cells rapidly lose their inductivity in 2D-culture given the loss of positional and microenvironmental cues. Spheroids have been capable of recreating the 3D intercellular organization of DP cells, however, DP cell-matrix interactions are poorly represented. Considering the specific nature of the DP's extracellular matrix (ECM), we functionalized gellan gum (GG) with collagen IV-(HepIII) or fibronectin-(cRGDfC) derived peptide sequences to generate a 3D environment in which the phenotype and physiological functions of DP cells are restored. We further tuned the stiffness of the microenvironments by varying GG amount. Biomimetic peptides in stiffer hydrogels promoted the adhesion of DP cells, while each peptide and amount of polymer independently influenced the type and quantity of ECM proteins deposited. Furthermore, although peptides did not seem to have an influence, stiffer hydrogels improved the inductive capacity of DP cells after short term culture. Interestingly, independently of the peptide, these hydrogels supported the recapitulation of basic hair morphogenesis-like events when incorporated in an organotypic human skin in vitro model. Our work demonstrates that tailored GG hydrogels support the generation of a microenvironment in which both cell-ECM and cell-cell interactions positively influence DP cells towards the creation of an artificial DP.

Mn-Based Methacrylated Gellan Gum Hydrogels for MRI-Guided Cell Delivery and Imaging.

This work aims to engineer a new stable injectable Mn-based methacrylated gellan gum (Mn/GG-MA) hydrogel for real-time monitored cell delivery into the central nervous system. To enable the hydrogel visualization under Magnetic Resonance Imaging (MRI), GG-MA solutions were supplemented with paramagnetic Mn2+ ions before its ionic crosslink with artificial cerebrospinal fluid (aCSF). The resulting formulations were stable, detectable by T1-weighted MRI scans and also injectable. Cell-laden hydrogels were prepared using the Mn/GG-MA formulations, extruded into aCSF for crosslink, and after 7 days of culture, the encapsulated human adipose-derived stem cells remained viable, as assessed by Live/Dead assay. In vivo tests, using double mutant MBPshi/shi/rag2 immunocompromised mice, showed that the injection of Mn/GG-MA solutions resulted in a continuous and traceable hydrogel, visible on MRI scans. Summing up, the developed formulations are suitable for both non-invasive cell delivery techniques and image-guided neurointerventions, paving the way for new therapeutic procedures.

Antimicrobial activity of hydrogel loaded with Capsicum annuum, Auricularia auricula judae and Kappaphycus alvarezii.

Antimicrobial activity refers to any substance that demonstrates the ability to reduce or inhibit the presence of microbes. Many substances derived from living organisms are claimed to play an essential role in inhibiting the growth of microorganisms. Thus, it is advisable to incorporate them into a functional system for delaying or inhibiting microbial activities. As a synthetic polymeric network, the hydrogel retaining a significant amount of water within its structure, is widely used in the healthcare industry. Due to water being one of their main constituents, microbial contamination in the hydrogel is challenging. Here, a simple method is proposed by investigating the antibacterial activities of gellan gum hydrogel loaded with hot water extracts of Capsicum annuum, Auricularia auricula judae and Kappaphycus alvarezii. Disc diffusion assay is used to evaluate the crude extracts' antimicrobial activity and their hydrogel against gram-positive and gram-negative bacteria including Escherichia coli, Pseudomonas aeruginosa, Staphylococcus aureus and Bacillus cereus. A. auricula-judae crude extract showed antimicrobial activity on P. aeruginosa and S. aureus. In contrast, hydrogel supplemented with A. auricula-judae only showed antimicrobial activity against P. aeruginosa. K. alvarezii crude extract showed antimicrobial activity on both P. aeruginosa and S. aureus. On the other hand, the inhibition zones formed by hydrogel supplemented with K. alvarezii on P. aeruginosa and S. aureus were smaller than the inhibition zones created by K. alvarezii crude extract. C. annuum crude extract only showed antibacterial activity on P. aeruginosa. No inhibition was observed in all test bacteria for the C. annuum with hydrogel. No inhibition zone was formed by A. auricula judae, K. alvarezii, C. annuum and hydrogel on B. cereus and E. coli. As a result, the antimicrobial activity of the crude extracts was higher than its product, hydrogel supplemented with crude extracts respectively. The hydrogel supplemented with A. auricula-judae, K. alvarezii and C. annuum show limited potential in antimicrobial activity, especially toward B. cereus and E. coli.

Injectable Decorin/Gellan Gum Hydrogel Encapsulating Adipose-Derived Stem Cells Enhances Anti-Inflammatory Effect in Cartilage Injury via Autophagy Signaling

Adipose-derived stem cells (ADSCs) are employed as a promising alternative in treating cartilage injury. Regulating the inflammatory “fingerprint” of ADSCs to improve their anti-inflammatory properties could enhance therapy efficiency. Herein, a novel injectable decorin/gellan gum hydrogel combined with ADSCs encapsulation for arthritis cartilage treatment is proposed. Decorin/gellan gum hydrogel was prepared according to the previous manufacturing protocol. The liquid–solid form transition of gellan gum hydrogel is perfectly suitable for intra-articular injection. Decorin-enriched matrix showing an immunomodulatory ability to enhance ADSCs anti-inflammatory phenotype under inflammation microenvironment by regulating autophagy signaling. This decorin/gellan gum/ADSCs hydrogel efficiently reverses interleukin-1β-induced cellular injury in chondrocytes. Through a mono-iodoacetate-induced arthritis mice model, the synergistic therapeutic effect of this ADSCs-loaded hydrogel, including inflammation attenuation and cartilage protection, is demonstrated. These results make the decorin/gellan gum hydrogel laden with ADSCs an ideal candidate for treating inflammatory joint disorders.

Biphasic monolithic osteochondral scaffolds obtained by diffusion-limited enzymatic mineralization of gellan gum hydrogel

Biphasic monolithic materials for the treatment of osteochondral defects were produced from polysaccharide hydrogel, gellan gum (GG). GG was enzymatically mineralized by alkaline phosphatase (ALP) in the presence of calcium glycerophosphate (CaGP). The desired distribution of the calcium phosphate (CaP) mineral phase was achieved by limiting the availability of CaGP to specific parts of the GG sample. Therefore, mineralization of GG was facilitated by the diffusion of CaGP, causing the formation of the CaP gradient. The distribution of CaP was analyzed along the cross section of the GG. The formation of a CaP gradient was mainly affected by the mineralization time and the ALP concentration. The formation of CaP was confirmed by Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy and mapping, as well as energy-dispersive X-ray spectroscopy (EDX) mapping of the interphase. The microstructure of mineralized and non-mineralized parts of the material was characterized by scanning electron microscopy (SEM) and atomic force microscopy (AFM) showing sub-micrometer CaP crystal formation, resulting in increased surface roughness. Compression tests and rheometric analyzes showed a 10-fold increase in stiffness of the GG mineralized part. Concomitantly, micromechanical tests performed by AFM showed an increase of Young's modulus from 17.8 to more than 200 kPa. In vitro evaluation of biphasic scaffolds was performed in contact with osteoblast-like MG-63 cells. The mineralized parts of GG were preferentially colonized by the cells over the non-mineralized parts. The results showed that osteochondral scaffolds of the desired structure and properties can be made from GG using a diffusion-limited enzymatic mineralization method.

Ionotropic Gelation and Chemical Crosslinking as Methods for Fabrication of Modified-Release Gellan Gum-Based Drug Delivery Systems.

Hydrogels have a tridimensional structure. They have the ability to absorb a significant amount of water or other natural or simulated fluids that cause their swelling albeit without losing their structure. Their properties can be exploited for encapsulation and modified targeted drug release. Among the numerous natural polymers suitable for obtaining hydrogels, gellan gum is one gaining much interest. It is a gelling agent with many unique features, and furthermore, it is non-toxic, biocompatible, and biodegradable. Its ability to react with oppositely charged molecules results in the forming of structured physical materials (films, beads, hydrogels, nanoparticles). The properties of obtained hydrogels can be modified by chemical crosslinking, which improves the three-dimensional structure of the gellan hydrogel. In the current review, an overview of gellan gum hydrogels and their properties will be presented as well as the mechanisms of ionotropic gelation or chemical crosslinking. Methods of producing gellan hydrogels and their possible applications related to improved release, bioavailability, and therapeutic activity were described.

An investigation on tribological behavior of methacrylated κ-carrageenan and gellan gum hydrogels as a candidate for chondral repair.

Natural polysaccharides have recently attracted attention as structural biomaterials to replace focal chondral defects. In the present study, in-vitro tribological performance of methacrylated κ-carrageenan and gellan gum hydrogels (KA-MA and GG-MA) was evaluated under physiological conditions. Coefficient of friction (COF) was continuously recorded over testing whilst worn area was measured post-testing. The findings help improve our understanding of KA-MA-H and GG-MA-H tribological performance under various physiological conditions. The friction and wear performance of the hydrogels improved in bovine calf serum lubricant at lower applied loads. Adhesion was the dominant wear mechanism detected by SEM. Among the proposed hydrogels GG-MA-H found robust mechanical properties, increased wear resistance and considerably low COF, which may suggest its potential usage as a cartilage substitute.

A cell adhesion-promoting multi-network 3D printing bio-ink based on natural polysaccharide hydrogel.

Due to its high biosafety, gellan gum (GG) hydrogel, a naturally occurring polysaccharide released by microorganisms, is frequently utilized in food and pharmaceuticals. In recent years, like GG, natural polysaccharide-based hydrogels have become increasingly popular in 3D-printed biomedical engineering because of their simplicity of processing, considerable shear thinning characteristic, and minimal pH dependence. To mitigate the negative effects of the GG's high biological inertia, poor cell adhesion, single cross-linked network, and high brittleness. Mesoporous silica nanospheres (MMSN) and Aldehyde-based methacrylated hyaluronic acid (AHAMA) were combined to sulfhydrated GG (TGG) to create a multi-network AHAMA/TGG/MMSN hydrogel in this study. For this composite hydrogel system, the multi-component offers several crosslinking networks: the double bond in AHAMA can be photocrosslinked by activating the photoinitiator, aldehyde groups on its side chain can create Schiff base bonds with MMSN, while TGG can self-curing at room temperature. The AHAMA/TGG/MMSN hydrogel, with a mass ratio of 2:6:1, exhibits good cell adhesion, high strength and elasticity, and great printability. We believe that this innovative multi-network hydrogel has potential uses in tissue regeneration and biomedical engineering.

Thermosensitive Injectable Gradient Hydrogel-Induced Bidirectional Differentiation of BMSCs.

Osteochondral defects threaten the quality of life of patients to a great extent. To simulate gradient changes in osteochondral tissue, a gradient-mixing injection device consisting of a controller and injection pumps is design. Bioactive glass (BG) and gellan gum (GG) are used to prepare thermosensitive injectable gradient hydrogels (B0.5 G, B1 G) with an upper critical solution temperature (UCST) range of 37.7-40.2 °C using this device for the first time. The mechanical properties of gradient hydrogels are significantly better than those of pure GG hydrogels. The gradients in the composition, structure, and morphology of gradient hydrogels are confirmed via physicochemical characterization. Cytocompatibility tests show that hydrogels, especially B0.5 G gradient hydrogels, promote the proliferation of bone marrow mesenchymal stem cells (BMSCs). Most importantly, qRT-PCR shows that the different components in B0.5 G gradient hydrogels simultaneously induce the osteogenic and chondrogenic differentiation of BMSCs. Experimental injection in porcine osteochondral defects indicates that the B0.5 G gradient hydrogel seamlessly fills irregular osteochondral defects in a less invasive manner by controlling the temperature to avoid cellular and tissue damage arising from crosslinkers or other conditions. These results show that thermosensitive injectable B0.5 G gradient hydrogels have the potential for less invasive integrated osteochondral repair.

Bioactivated gellan gum hydrogels affect cellular rearrangement and cell response in vascular co-culture and subcutaneous implant models

Hydrogels are suitable soft tissue mimics and capable of creating pre-vascularized tissues, that are useful for in vitro tissue engineering and in vivo regenerative medicine. The polysaccharide gellan gum (GG) offers an intriguing matrix material but requires bioactivation in order to support cell attachment and transfer of biomechanical cues. Here, four versatile modifications were investigated: Purified NaGG; avidin-modified NaGG combined with biotinylated fibronectin (NaGG-avd); oxidized GG (GGox) covalently modified with carbohydrazide-modified gelatin (gelaCDH) or adipic hydrazide-modified gelatin (gelaADH). All materials were subjected to rheological analysis to assess their viscoelastic properties, using a time sweep for gelation analysis, and subsequent amplitude sweep of the formed hydrogels. The sweeps show that NaGG and NaGG-avd are rather brittle, while gelatin-based hydrogels are more elastic. The degradation of preformed hydrogels in cell culture medium was analyzed with an amplitude sweep and show that gelatin-containing hydrogels degrade more dramatically. A co-culture of GFP-tagged HUVEC and hASC was performed to induce vascular network formation in 3D for up to 14 days. Immunofluorescence staining of the αSMA+ network showed increased cell response to gelatin-GG networks, while the NaGG-based hydrogels did not allow for the elongation of cells. Preformed, 3D hydrogels disks were implanted to subcutaneous rat skin pockets to evaluate biological in vivo response. As visible from the hematoxylin and eosin-stained tissue slices, all materials are biocompatible, however gelatin-GG hydrogels produced a stronger host response. This work indicates, that besides the biochemical cues added to the GG hydrogels, also their viscoelasticity greatly influences the biological response.

Fast stress relaxing gellan gum that enhances the microenvironment and secreting function of bone mesenchymal stem cells

This study shows tunable stress relaxing gellan gum (GG) hydrogel for enhanced cell growth and regenerative medicine. The molecular weight and physical crosslinking density of GG were tuned and characterized with physicochemical analysis and mechanical tests. The result showed that a decrease in the molecular weight of the GG correlated with a decline in the mechanical properties but faster stress relaxing character. We also discovered that human-derived bone marrow stem cells (hBMSC) showed active viability, proliferation, and remodeling in the fast stress relaxing GG hydrogel. In particular, hBMSC showed an enhanced release profile of growth factors and exosomes (Exo) in the fast stress relaxing GG hydrogel. The secretome obtained from hBMSC embedded in hydrogel exhibited similar cytotoxicity and wound healing properties to that of secretome extracted from hBMSC cultured in a tissue culture plate (TCP) a standard culture condition. Thus, this work demonstrates the potential of fast stress relaxing GG hydrogels for medical application.

Co-delivery of hydrophobic astaxanthin and hydrophilic phycocyanin by a pH-sensitive water-in-oil-in-water double emulsion-filled gellan gum hydrogel

Astaxanthin and phycocyanin were recommended for their bioactivities. However, limited stability and low bioavailability were not conducive to their applications in the food industry. A pH-sensitive double W 1 /O/W 2 emulsion-filled hydrogel loaded concomitantly with astaxanthin and phycocyanin was prepared using the two-step emulsification process. First, the W 1 /O emulsion was fabricated using polyglycerol polyricinoleate as a hydrophobic emulsifier. Second, W 1 /O/W 2 emulsions are typically formed by homogenizing W 1 /O emulsions with an aqueous phase containing sodium caseinate. Later, gellan gum was added to the double emulsion as an additional stabilizer and gelling agent to prepare the double emulsion-filled hydrogel. The influence of gellan gum on the microstructure, rheology, and stability of double emulsions was investigated. The double emulsions remained stable during 30 days’ storage when the content of gellan gum was above 0.4% since the hydrogel formation. The microstructure of double emulsions was maintained under the acidic environment due to the network formed by gellan gum while transformed from hydrogel state to solution state since the disintegration of gellan gum network under neutral conditions. Further, based on the pH-sensitive nature of double emulsion-filled hydrogel, the co-encapsulation of phycocyanin and astaxanthin and the in vitro release behavior were demonstrated. The maximum encapsulation efficiency of phycocyanin and astaxanthin was 94.1% and 90.82%, respectively. In vitro digestion proved their intestinal targeted release ability. These results suggested that the double emulsion-filled gellan gum hydrogel can be used as a pH-sensitive carrier for intestinal targeted delivery of hydrophobic and hydrophilic food bioactive ingredients. • pH-sensitive double emulsion-filled gellan gum hydrogel was prepared. • Co-encapsulation of astaxanthin and phycocyanin was achieved. • Gellan gum improved the encapsulation efficiency of astaxanthin and phycocyanin. • The double emulsions-filled hydrogel achieved intestinal targeting delivery.

A Comparative Evaluation of the Structural and Biomechanical Properties of Food-Grade Biopolymers as Potential Hydrogel Building Blocks.

The aim of this study was to conduct a comparative assessment of the structural and biomechanical properties of eight selected food-grade biopolymers (pea protein, wheat protein, gellan gum, konjac gum, inulin, maltodextrin, psyllium, and tara gum) as potential hydrogel building blocks. The prepared samples were investigated in terms of the volumetric gelling index, microrheological parameters, physical stability, and color parameters. Pea protein, gellan gum, konjac gum, and psyllium samples had high VGI values (100%), low solid–liquid balance (SLB < 0.5), and high macroscopic viscosity index (MVI) values (53.50, 59.98, 81.58, and 45.62 nm−2, respectively) in comparison with the samples prepared using wheat protein, maltodextrin, and tara gum (SLB > 0.5, MVI: 13.58, 0.04, and 0.25 nm−2, respectively). Inulin had the highest elasticity index value (31.05 nm−2) and MVI value (590.17 nm−2). The instability index was the lowest in the case of pea protein, gellan gum, konjac gum, and inulin (below 0.02). The color parameters and whiteness index (WI) of each biopolymer differed significantly from one another. Based on the obtained results, pea protein, gellan gum, konjac gum, and psyllium hydrogels had similar structural and biomechanical properties, while inulin hydrogel had the most diverse properties. Wheat protein, maltodextrin, and tara gum did not form a gel structure.

Primers for the Adhesion of Gellan Gum-Based Hydrogels to the Cartilage: A Comparative Study.

A stable adhesion to the cartilage is a crucial requisite for hydrogels used for cartilage regeneration. Indeed, a weak interface between the tissue and the implanted material may produce a premature detachment and thus the failure of the regeneration processes. Fibrin glue, cellulose nanofibers and catecholamines have been proposed in the state-of-the-art as primers to improve the adhesion. However, no studies focused on a systematic comparison of their performance. This work aims to evaluate the adhesion strength between ex vivo cartilage specimens and polysaccharide hydrogels (gellan gum and methacrylated gellan gum), by applying the mentioned primers as intermediate layer. Results show that the fibrin glue and the cellulose nanofibers improve the adhesion strength, while catecholamines do not guarantee reaching a clinically acceptable value. Stem cells embedded in gellan gum hydrogels reduce the adhesion strength when fibrin glue is used as a primer, being anyhow still sufficient for in vivo applications.

Development of an antibiotics delivery system for topical treatment of the neglected tropical disease Buruli ulcer

Skin infection by Mycobacterium ulcerans causes Buruli ulcer (BU) disease, a serious condition that significantly impact patient’ health and quality of life and can be very difficult to treat. Treatment of BU is based on daily systemic administration of antibiotics for at least 8 weeks and presents drawbacks associated with the mode and duration of drug administration and potential side effects. Thus, new therapeutic strategies are needed to improve the efficacy and modality of BU therapeutics, resulting in a more convenient and safer antibiotic regimen. Hence, we developed a dual delivery system based on poly(hydroxybutyrate-co-hydroxyvalerate) (PHBV) microparticles and a gellan gum (GG) hydrogel for delivery of rifampicin (RIF) and streptomycin (STR), two antibiotics used for BU treatment. RIF was successfully loaded into PHBV microparticles, with an encapsulation efficiency of 43%, that also revealed a mean size of 10 µm, spherical form and rough topography. These microparticles were further embedded in a GG hydrogel containing STR. The resultant hydrogel showed a porous microstructure that conferred a high water retention capability (superior to 2000%) and a controlled release of both antibiotics. Also, biological studies revealed antibacterial activity against M. ulcerans, and a good cytocompatibility in a fibroblast cell line. Thus, the proposed drug delivery system can constitute a potential topical approach for treatment of skin ulcers caused by BU disease.

3D bioprinting of gellan gum-based hydrogels tethered with laminin-derived peptides for improved cellular behavior.

The treatment of skeletal muscle defects is still a topic of noteworthy concern since surgical intervention is not capable of recovering muscle function. Herein, we propose myoblasts laden in laminin-inspired biofunctionalized gellan gum hydrogels as promising tissue-engineered skeletal muscle surrogates. Gellan gum-based hydrogels were developed by combining native gellan gum (GG) and GG tethered with laminin-derived peptides (CIKVAVS (V), KNRLTIELEVRTC (T) or RKRLQVQLSIRTC (Q)), using different polymer content (0.75%-1.875%). Hydrogels were characterized in terms of compressive modulus, molecules trafficking, and C2C12 adhesion. Hydrogels with higher polymeric content (1.125%-1.875%) showed higher stiffness whereas hydrogels with lower polymer content (0.75%-1.125%) showed higher fluorescein isothiocyanate-dextran molecules diffusion. Cell spreading was achieved regardless of the laminin-derived peptide but preferred in hydrogels with higher polymer content (1.125%-1.875%). Taken together, hydrogels with 1.125% of polymer content were selected for printability analysis. GG-based inks showed a non-newtonian, shear-thinning, and thixotropic behavior suitable for printing. Accordingly, all inks were printable, but inks tethered with T and Q peptides presented some signs of clogging. Cell viability was affected after printing but increased after 7 days of culture. After 7 days, cells were spreading but not showing significant signs of cell-cell communications. Therefore, cell density was increased, thus, myocytes loaded in V-tethered GG-based inks showed higher cell-cell communication, spreading morphology, and alignment 7, 14 days post-printing. Overall, myoblasts laden in laminin-inspired biofunctionalized GG-based hydrogels are a promising skeletal muscle surrogate with the potential to be used as in vitro model or explored for further in vivo applications.

Aerobic Cometabolism of Chlorinated Solvents and 1,4-Dioxane in Continuous-Flow Columns Packed with Gellan-Gum Hydrogels Coencapsulated with ATCC Strain 21198 and TBOS or T2BOS as Slow-Release Compounds

Aerobic Cometabolism of Chlorinated Solvents and 1,4-Dioxane in Continuous-Flow Columns Packed with Gellan-Gum Hydrogels Coencapsulated with ATCC Strain 21198 and TBOS or T2BOS as Slow-Release Compounds

Injectable laminin-biofunctionalized gellan gum hydrogels loaded with myoblasts for skeletal muscle regeneration

Moderate muscular injuries that exceed muscular tissue's auto-healing capacity are still a topic of noteworthy concern. Tissue engineering appeared as a promising therapeutic strategy capable of overcoming this unmet clinical need. To attain such goal, herein we propose an in situ-crosslinking gellan gum (GG)-based hydrogel tethered with a skeletal muscle-inspired laminin-derived peptide RKRLQVQLSIRTC(Q) and encapsulated with skeletal muscle cells (SMCs). Pre-hydrogel solutions presented decreasing shear viscosity with increasing shear rate and shear stress, and required low forces for extrusion, validating their injectability. The GGDVS hydrogel was functionalized with Q-peptide with 30% of efficiency. C2C12 were able to adhere to the developed hydrogel, remained living and spreading 7 days post-encapsulation. Q-peptide release studies indicated that 25% of the unbound peptide can be released from the hydrogels up to 7 days, dependent on the hydrogel formulation. Treatment of a chemically-induced muscular lesion in mice with an injection of C2C12-laden hydrogels improved myogenesis, primarily promoted by the C2C12. In accordance, a high density of myoblasts (α-SA+ and MYH7+) were localized in tissues treated with the C2C12 (alone or encapsulated in the hydrogel). α-SA protein levels were significantly increased 8 weeks post-treatment with C2C12-laden hydrogels and MHC protein levels were increased in all experimental groups 4 weeks post-treatment, in relation to the SHAM. Neovascularization and neoinnervation was also detected in the defects. Altogether, this study indicates that C2C12-laden hydrogels hold great potential for skeletal muscle regeneration. Statement of significanceWe developed an injectable gellan gum-based hydrogel for delivering C2C12 into localized myopathic model. The gellan gum was biofunctinalized with laminin-derived peptide to mimic the native muscular ECM. In addition, hydrogel was physically tuned to mimic the mechanical properties of native tissue. To the best of our knowledge, this formula was used for the first time under the context of skeletal muscle tissue regeneration. The injectability of the developed hydrogel provided non-invasive administration method, combined with a reliable microenvironment that can host C2C12 with nominal inflammation, indicated by the survival and adhesion of encapsulated cells post-injection. The treatment of skeletal muscle defect with the cell-laden hydrogel approach significantly enhanced the regeneration of localized muscular trauma.

Liposome Loaded Ion/Temperature Dual Responsive Gellan Gum Hydrogel as Potential Nasal-To-Brain Delivery System.

Intranasal administration, which can bypass the blood-brain barrier (BBB), is widely recognized as a promising strategy for high-efficiency drug delivery to the brain. Herein, for the purpose of effectively delivering drugs to the brain via intranasal administration, glutathione (GSH)-modified gellan gum (GSH-GG) with ion/temperature dual responsive properties was synthesized and encapsulated on galanthamine hydrobromide (GH)-loaded liposomes (GH-Lipo) for effective GH delivery to the brain (GH-Lipo@GSH-GG). Our results demonstrated that GSH-GG greatly decreased the gelation temperature of GG from 44.0 °C to 22.1 °C without compromising its ion responsiveness. Moreover, GSH-GG had a good protection ability for GH-loaded liposomes without affecting its drug release. Most importantly, the finally obtained GH-Lipo@GSHGG showed acceptable targeted delivery of GH to the brain upon in vivo administration. Therefore, this formulation can be employed as a potential delivery system in nasal-to-brain delivery.