Gelatin Nanofibers Research Articles

Fast-dissolving electrospun gelatin nanofibers encapsulating ciprofloxacin/cyclodextrin inclusion complex.

Electrospun gelatin nanofibrous matrix encapsulating ciprofloxacin (CIP)/hydroxypropyl-beta-cyclodextrin (HPβCD)-inclusion complex (IC) was produced via electrospinning method. Computational modeling indicated that van der Waals forces are the most significant driving forces for the complexation and hydrophobic moiety (piperazinyl) of CIP, which was included in the cavity of HPβCD. The FTIR and XRD studies indicated the formation of CIP/HPβCD host/guest complexation, FTIR also suggested that hydrophobic moiety of CIP is in the HPβCD cavity in parallel with the computational modeling results. The phase solubility diagram demonstrated that the solubility of CIP was enhanced after complexation with HPβCD. SEM images showed that electrospun gelatin nanofibers encapsulating CIP/HPβCD-IC have bead-free morphology with a diameter of ˜90 nm. The gelatin nanofibrous mat loaded with CIP/HPβCD-IC has exhibited fast-dissolving character in water compared to gelatin/CIP nanofibrous mat due to the enhanced wettability of the nanofibrous mat by HPβCD and improvement achieved in the solubility of CIP.

Preparation and Characterization of Electrospun Gelatin Nanofibers for Use as Nonaqueous Electrolyte in Electric Double-Layer Capacitor

A novel nanofibrous gel electrolyte was prepared via gelatin electrospinning for use as a nonaqueous electrolyte in electric double-layer capacitors (EDLCs). An electrospinning technique with a 25 wt% gelatin solution was applied to produce gelatin electrospun (GES) nanofiber electrolytes. Structural analysis of the GES products showed a clearly nanofibrous structure with fiber diameters in the 306.2–428.4 nm range and exhibiting high thermal stability, high tensile strength, and a stable form of nanofibrous structure after immersion in 1-ethyl-3-methylimidazolium tetrafluoroborate (EMImBF4). After testing over a range of spinning times, GES electrolytes that were produced at 25 min (GES-25) had a suitable thickness for the assembly of EDLC with the optimized tensile properties and were used to fabricate EDLC test cells with EMImBF4. These test cells were compared to those with pure EMImBF4 and a separator as an electrolyte. The electrochemical properties of the test cells were characterized by charge-discharge testing, discharge capacitance, and alternative current (AC) impedance measurements. AC impedance measurements showed that the test cell with the GES-25/EMImBF4 gel electrolyte showed slightly poorer contact with the electrode when compared to that with pure EMImBF4, whereas exhibited comparable IR drop and discharge capacitance (calculated capacitance retention was 56.6%). The results demonstrated that this novel gel electrolyte can be used as a nonaqueous electrolyte in order to improve the safety in EDLCs.

Electrospun Gelatin Nanofibers Encapsulated with Peppermint and Chamomile Essential Oils as Potential Edible Packaging.

Natural and edible materials have attracted increasing attention in food packaging, which could overcome the serious environmental issues caused by conventional non-biodegradable synthetic packaging. In this work, gelatin nanofibers incorporated with two kinds of essential oil (EO), peppermint essential oil (PO) and chamomile essential oil (CO), were fabricated by electrospinning for potential edible packaging application. Electron microscopy showed that smooth and uniform morphology of the gelatin/EOs was obtained, and the diameter of nanofibers was mostly enlarged with the increase of the EO content. The proton nuclear magnetic resonance spectrum confirmed the existence of PO and CO in nanofibers after electrospinning. The addition of EOs led to an enhancement of the water contact angle of nanofibers. The antioxidant activity was significantly improved for the nanofibers loaded with CO, while the antibacteria activity against Escherichia coli and Staphylococcus aureus was better for the fibers with PO addition. The combination of half PO and half CO in nanofibers compensated for their respective limitations and exhibited optimum bioactivities. Finally, the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assay with NIH-3T3 fibroblasts demonstrated the absence of cytotoxicity of the gelatin/EO nanofibers. Thus, our studies suggest that the developed gelatin/PO/CO nanofiber could be a promising candidate for edible packaging.

Dual micelles-loaded gelatin nanofibers and their application in lipopolysaccharide-induced periodontal disease.

IntroductionCombined therapies utilizing inhibitors to remove pathogens are needed to suppress lipopolysaccharide (LPS)-induced periodontal disease. We prepared a novel, multi-agent delivery scaffold for periodontal treatment.MethodsIn this study, we synthesized SP600125 (a JNK inhibitor) and SB203580 (a p38 inhibitor) drug-loaded poly(ethylene glycol)-block-caprolactone copolymer via dialysis method. The physical property of micelles was characterized through dynamic light scattering and transmission electron microscopy. The cell growth and LPS-induced MMP-2 and MMP-13 expression were evaluated through CCK-8, real-time PCR and Western blot assay. The release of SP600125 and SB203580 from different scaffolds was estimated. Microcomputed tomography and histology were used for evaluating the effect of the micelles-loaded nanofibers on the treatment of class II furcation defects in dogs.ResultsThe drug was then successfully incorporated into gelatin fibers during electrospinning process. We confirmed that the micelles had spherical structure and an average particle size of 160 nm for SP600125-micelles (SP-Ms) and 150 nm for SB203580-micelles (SB-Ms). The nanofiber scaffold showed excellent encapsulation capability, in vitro drug-release behavior, and cell compatibility. Real-time PCR and Western blot assay further indicated that LPS-induced MMP-2 and MMP-13 expression was significantly inhibited by the scaffold.ConclusionThe results suggested that the dual drug-loaded system developed in this study might become a highly effective therapy for periodontal disease.

Bi-layered electrospun nanofibrous membrane with osteogenic and antibacterial properties for guided bone regeneration.

Guided bone regeneration (GBR) membranes have the potential to prevent the invasion of epithelial and connective tissues as well as to maintain a stable space for facilitating the ingrowth of regenerative bone tissue. However, the bioactivity and regeneration potential of currently available membranes still need to be improved. In this study, a novel bi-layered membrane with both osteogenic and antibacterial functions was developed for GBR applications. The loose layer (LL) of the membrane was composed of conjugated electrospun poly (lactic-co-glycolic acid) (PLGA)/gelatin nanofibers incorporating dexamethasone-loaded mesoporous silica nanoparticles (DEX@MSNs), while the dense layer (DL) of the membrane consisted of traditionally electrospun PLGA nanofibers loaded with the broad-spectrum antibiotic doxycycline hyclate (DCH). Morphological results showed that the LL (DEX@MSNs/PLGA/Gel) membrane exhibited a porous and loosely packed structure, which was beneficial for cell adhesion and infiltration, while the DL (DCH/PLGA) membrane remained dense enough to act as a barrier. In vitro drug release tests indicated that both DEX and DCH followed a favorable sustained release profile. The cell viability evaluation suggested that the electrospun membranes possessed good cytocompatibility. Furthermore, in vitro osteogenesis analyses demonstrated that the DEX@MSNs/PLGA/Gel composite membrane possessed an enhanced osteoinductive capacity for rat bone marrow stem cells (BMSCs), which was verified by the increased alkaline phosphatase (ALP) activity, the enhanced calcium deposition, and the upregulated osteocalcin (OCN) expression. In vitro antimicrobial experiments revealed the effective antibacterial potency of the DCH/PLGA membrane. In conclusion, the prepared nanocarrier-incorporated bi-layered composite membrane with combined osteogenic and antibacterial properties may be a promising candidate for GBR application.

Fabrication of centrifugally spun prepared poly(lactic acid)/gelatin/ciprofloxacin nanofibers for antimicrobial wound dressing.

Centrifugal spinning is a novel technology for producing ultrafine fibers in high yield with diameters ranging from micro to nanometers. The obtained fibers have potential applications in the field of tissue engineering, wound dressing, and biomedicine etc. In this paper, a system of poly(lactic acid)/gelatin (PLA/GE) nanofibers loaded with ciprofloxacin (CPF) drug for wound dressings were successfully prepared by centrifugal spinning. The nanofibers were characterized by scanning electron microscopy (SEM) coupled with energy dispersive spectroscopy (EDS), X-ray diffraction (XRD), thermal gravimetric analysis (TGA) and Fourier transform infrared spectroscopy (FTIR). In addition, the nanofibers' properties in terms of hydrophilicity, antibacterial properties and in vitro drug release were further investigated. The results showed that the CPF drug was successfully loaded and in an amorphous state in the PLA/GE nanofibers, the surface of the nanofibers was smooth and the nanofibers' diameter became large after the drug was loaded. The thermal stability of the nanofiber was reduced while the hydrophilicity was improved. Antibacterial and in vitro drug release experiments showed that the nanofibers have obvious antibacterial properties and have the positive effect of sustained release of the drug. Drug-loaded PLA/GE nanofibers could be good candidates for wound dressing.

Combating Microbial Contamination with Robust Polymeric Nanofibers: Elemental Effect on the Mussel-Inspired Cross-Linking of Electrospun Gelatin

Designing biocompatible nanofibrous mats capable of preventing microbial colonization from resident and nosocomial bacteria for an extended period remains an unmet clinical need. In the present work, we designed antibiotic free durable antimicrobial nanofiber mats by taking advantage of synergistic interactions between polydopamine (pDA) and metal ions with varying degree of antimicrobial properties (Ag+, Mg2+, Ca2+, and Zn2+). Microscopic analysis showed successful pDA-mediated cross-linking of the gelatin nanofibers, which further improved by the inclusion of Ag+, Mg2+, and Ca2+ ions as supported by mechanical and thermal studies. Spectroscopic results reinforce the presence of strong interactions between pDA and metal ions in the composite nanofibers, leading to generation of robust polymeric nanofibers. We further showed that strong pDA-Ag interactions attenuated the cell cytotoxicity and anticell proliferative properties of silver ions for immortalized keratinocytes and primary human dermal fibroblasts. pDA-Ca2+/Zn2+ interactions rendered the composite structure sterile against methicillin-resistant Staphylococcus aureus and vancomycin-resistant Enterococcus faecium strains, whereas the silver ion-incorporated composite mats displayed broad spectrum antibacterial activity against both Gram-positive/-negative bacteria and yeast strains. We showed that the strong pDA-Ag interactions help retaining long-term antimicrobial activity of the mats for at least 40 days while attenuating mammalian cell cytotoxicity of silver ions for skin cells. Overall, the results suggest the potential of pDA-metal ion interactions for engineering sterile nanofibrous mats and expanding the antibiotic armamentarium against drug-resistant pathogens.

Moringa oil/chitosan nanoparticles embedded gelatin nanofibers for food packaging against Listeria monocytogenes and Staphylococcus aureus on cheese

Abstract The current study aims to prepare moringa oil-loaded chitosan nanoparticles (MO@CNPs) and fabricate MO@CNPs embedded gelatin nanofibers for biocontrol of Listeria monocytogenes and Staphylococcus aureus on cheese. The optimal MO@CNPs were prepared by the ionic crosslinking method with the concentration of moringa oil at 20 mg/mL and chitosan at 3.0 mg/mL. The nanoparticle exhibited desirable particle size, PDI and zeta potential. Furthermore, the optimal concentration of MO@CNPs embedded in gelatin nanofibers was found to be 9.0 mg/mL after the determination of nanofiber physical properties. The results of SEM and AFM confirmed that the nanofibers were prepared successfully and achieved uniform diameter at 142.5 nm. The release rate of moringa oil from the nanoparticles declined due to the encapsulation of nanofibers. For the application on cheese, MO@CNPs nanofibers possessed high antibacterial activity against L. monocytogenes and S. aureus at 4 °C and 25 °C for 10 days, without any effect on the sensory quality of cheese. As a result, MO@CNPs nanofibers could be a promising active food packaging material for food preservation.

Biomimetic composite scaffold of hydroxyapatite/gelatin-chitosan core-shell nanofibers for bone tissue engineering

Good biocompatibility and osteogenesis of three-dimensional porous scaffolds are critical for bone tissue engineering. In this work, biomimetic hydroxyapatite/gelatin-chitosan core-shell nanofibers composite scaffolds have been fabricated to mimic both the specific structure and the chemical composition of natural bone. The coaxial electrospinning technique was introduced to prepare gelatin-chitosan core-shell structured nanofibers mat which formed three-dimensional porous structure for promoting cells growth. The gelatin-chitosan core-shell nanofibers formed Arginine-Glycine-Aspartic acid (RGD)-like structure to mimic the organic component of natural bone extracellular matrix. Hydroxyapatite (Ca10(PO4)6(OH)2, HAP), as the major mineral constituent of native bone, was then deposited onto the surface of gelatin-chitosan core-shell structured nanofibers by a wet chemical method. Compared with chitosan nanofibers, gelatin nanofibers and chitosan-gelatin composite nanofibers, gelatin-chitosan core-shell structured nanofibers improved the mineralization efficiency of hydroxyapatite and formed a homogeneous HAP deposit. When Human osteoblast like cell line (MG-63) were cultured on the materials, the results showed that hydroxyapatite deposited on the gelatin-chitosan core-shell structured nanofibers could further enhance osteoblast cell proliferation. The biomimetic composite scaffolds could be suggested as a promising material to promote osteoblast cell growth in bone tissue engineering.

Coaxially-structured fibres with tailored material properties for vascular graft implant

Readily-available small-diameter arterial grafts require a great combination of materials properties, including high strength, compliance, suturability, blood sealing and anti-thrombogenicity, as well as anti-kinking property for those used in challenging anatomical situations. We have constructed grafts composed of coaxially-structured polycaprolactone (PCL)/gelatin nanofibres, and tailored the material structures to achieve high strength, compliance and kink resistance, as well as excellent water sealing and anti-thrombogenicity. Coaxially-structured fibres in the grafts provided mechanical stability through the core, while flexibility and cell adhesion through the sheath. Results showed that graft compliance increased while strength decreased with the concentration ratio between core and sheath polymers. Compared to pure PCL fibrous surfaces, coaxial PCL/gelatin fibrous surfaces potently inhibited platelet adhesion and activation, providing excellent anti-thrombogenicity. To render sufficient burst strength and suturability, an additional layer of pure PCL was necessary to cap the layer of coaxial PCL/gelatin fibres. The two-layered grafts with the wall thickness comparable to native arteries demonstrated artery-like compliance and kink resistance, properties important to arteries under complex mechanical loading. The in vivo evaluation was performed using the interposition carotid artery graft model in rabbits for three months. Interestingly, results from ultrasonic imaging and histological analysis demonstrated that the two-layered grafts with a thinner outer PCL layer, which possessed higher compliance and kink resistance, showed increased blood flow, minimal lumen reduction and fibrosis. All vascular grafts exhibited patency and induced limited cell infiltration. Together, we presented a facile and useful approach to fabricate vascular grafts with superior graft performances, biomechanical properties, and blood compatibility. Grafts with artery-like compliance and flexibility have demonstrated improved implantation outcomes.

Lithospermi radix extract-containing bilayer nanofiber scaffold for promoting wound healing in a rat model

This study examined the in vitro characteristics and in vivo wound healing effect of novel Lithospermi radix (LR) extract-containing bilayer scaffolds in a rat model. LR extract, which has been used as a traditional herbal medicine for treating skin wounds, was added to a biocompatible gelatin solution. After glutaraldehyde vapor was used to modify the surface of chitosan scaffolds, various ratios of mammalian gelatin and fish collagen (GF100, GF91 and GF82) were electrospun onto the chitosan scaffolds to manufacture bilayer scaffolds. The porous chitosan scaffolds with a high swelling ratio showed efficient exudate absorption ability. GF91 gelatin nanofibers electrospun at a constant flow rate at 0.1 mL/h and a voltage of 20 kV displayed the optimal characteristics required for cell attachment and skin tissue regeneration. Moreover, the LR extract was successfully released slowly from the GF91 nanofibers. The investigation of the wound-healing activity of the chitosan/gelatin (CGF) bilayer scaffolds revealed that CGF91L provided the highest wound recovery rate in vivo in Sprague-Dawley (SD) rats. Based on its wound-healing effect and beneficial characteristics, the novel LR extract-containing CGF91 bilayer scaffold demonstrates potential as a material for treating skin wounds.

Investigation of morphological, mechanical and biological properties of cellulose nanocrystal reinforced electrospun gelatin nanofibers

Incorporation of nanoparticles into biomaterials is of interest due to the high demand for medical devices with enhanced mechanical properties. In this study, cellulose nanocrystals (CNC) were incorporated in electrospun gelatin nanofibers at various loadings (0–15% w/w) and characterized using XRD, TGA, TEM, SEM, FTIR, and tensile tests. Results obtained from TGA and tensile properties indicate that CNC were agglomerated at loadings exceeding 5%; however, TEM showed excellent dispersion of nanoparticles at 5% CNC. A slight increase in biodegradability of crosslinked gelatin nanofibers was observed with CNC incorporation. MTT cytotoxicity, fluorescent staining, and SEM images showed that CNC had no significant effect on cell growth and proliferation.

Preparation of gelatin/genipin nanofibrous membrane for tympanic member repair

The wound healing for tympanic membrane (TM) perforations is one of the most common clinical treatment in otomicrosurgery. Recently, tissue-engineered composites and grafts, also new designs of biomaterials are applied to the management of TM perforation. In this work, a series of gelatin/genipin nanofibrous films were prepared as a patch for repairing TM perforation. Gelatin, a type of biomaterial with excellent electrospinning performance, has been used for preparing the nanofibers. The genipin, as a crosslinking agent, has been blended into the gelatin nanofibers. The reaction between gelatin and genipin engender suitable tensile strength and water-resistance for TM patch. The survival rate of human umbilical vein endothelial cells and fibroblasts demonstrated that the gelatin/genipin nanofiber scaffolds had good biocompatibility, which indicated the genipin was a kind of effective and nontoxic crosslinking agent for improving the mechanical property and water-resistance of gelatin films. In short, our work provides a novel macromolecular material with good mechanical properties, water-tolerance and excellent biocompatibility which could be used as a potential patch for TM repair.

In vitro evaluation of phytochemical loaded electrospun gelatin nanofibers for application in bone and cartilage tissue engineering

Wattakaka volubilis, a medicinal plant, is known to exhibit various potential health benefits and has traditionally been used in Ayurveda for various medicinal applications. In the present study, phytochemicals hexadecanoic acid, octadecanoic acid and N,N-Diisopropyl(2,2,3,3,3-pentafluoropropyl)amine isolated from W. volubilis leaf extract were co-electrospun with gelatin nanofibers for meniscus and osteoblast cell attachment and proliferation. The electrospun nanofibers were characterized using suitable techniques such as a scanning electron microscope and Fourier transform infrared spectroscopy. The mechanical property of electrospun gelatin nanofibers and phytochemicals incorporated gelatin nanofibers were tensile tested. Both the control and phytochemical loaded nanofiber exhibited a similar stress–strain trend. The average diameter of the control and phytocompound loaded gelatin nanofiber was found to be 300 ± 5.5 nm and 483 ± 12 nm, respectively. The rate of biodegradation of the control and phytochemical loaded nanofiber was analyzed in a simulated body fluid. The cell attachment and proliferation were monitored using a fluorescence microscope after appropriate staining. The cell viability, DNA content, extracellular secretion confirmed that the phytocompound loaded gelatin nanofibers were non-toxic and enhanced the meniscus and osteoblast cell growth and proliferation. This phytocompound loaded gelatin matrix may be used as a potential scaffold for cartilage and bone tissue engineering applications.

Hybrid scaffolds enhanced by nanofibers improve in vitro cell behavior for tissue regeneration

To construct a biomimetic scaffold with a nanoscale structure similar to that of natural tissue, the objective of this work was to prepare three-dimensional (3D) porous hybrid scaffolds based on gelatin and bacterial cellulose nanofibers for tissue regeneration. The nanofibrous structure, water absorption, and compressive mechanical properties of the scaffolds were studied. The hybrid scaffolds not only give a sufficiently porous structure for efficient nutrient transport and vascularization, but also provide the nanofibrous structure and improve the roughness of the scaffold pore walls. The hybrid scaffolds also exhibit higher modulus as stiffness compared to the pure gelatin scaffold. The viability and morphology of Pig iliac endothelial cells (PIECs) cultured on the 3D scaffolds were examined. PIECs adhered and proliferated better on the stiff hybrid scaffold with nanofibers compared to the soft gelatin scaffold without nanofibers. The results addressed the effect of the nanofibers and the stiffness of scaffolds on cell behavior, and the biomimetic nanofibrous hybrid scaffolds would be highly favorable/desired for tissue regeneration, e.g., skin and urethral regeneration.

Fabrication of three-dimensional nanofibrous gelatin scaffolds using one-step crosslink technique

Electrospun nanofibers have been considered to be an ideal scaffold for tissue engineering, because of the extracellular-matrix-like structure and the well-controlled fabrication. Here, a new method was used to fabricate electrospun three-dimensional macroporous nanofibrous gelatin scaffolds in ethanol bath by one-step crosslink with glutaraldehyde. The mean diameter of the one-step crosslinked fibers was significantly smaller than that of the traditional two-step crosslinked fibers (p < 0.05), and scaffolds prepared by one-step crosslink were fluffy and porous. No significant difference was found in the degradation rates for both fibers within 14 days. After immersion in PBS for 14 days, numerous two-step crosslinked fibers merged together. By contrast, the morphology and macroporous structure of one-step crosslinked fibers showed no evident change and were generally maintained. Approximate crosslinking degrees of the two-step and one-step crosslinked gelatin fibers were 40% and 54%, respectively (p < 0.05). Results from fluorescence microscopy and hematoxylin-eosin staining showed that MC3T3-E1 subclone four cells were distributed more evenly and diversely in the one-step crosslinked fiber scaffolds. The one-step crosslinked fibers enhanced the proliferation and differentiation potential of MC3T3-E1 cells. Furthermore, one-step crosslinked fibers were beneficial in repairing defects in the skulls of rats. Thus, one-step crosslink by glutaraldehyde in ethanol bath is a cost-effective and simple method to fabricate three-dimensional macroporous nanofiberous scaffolds. This technique retains the morphology and structure of the gelatin fibers, and enhances the biological performance of scaffolds in vitro and in vivo.

Synthesis, Characterization and Antibacterial Activity of Ciprofloxacin Loaded Electrospun Gelatin Nanofibers

Synthesis, Characterization and Antibacterial Activity of Ciprofloxacin Loaded Electrospun Gelatin Nanofibers

Preparation and properties of gelatin nanofibers containing lipopeptide biosurfactant by electrospinning technique as the prototype of wound covering and healing materials

Gelatin nanofibers containing lipopeptide biosurfactant which had high surface activities and antimicrobial potential were fabricated by electrospinning technique to study their potentiality for biomedical applications. Operating voltage and concentration (w/w) of lipopeptide biosurfactant in 20% (w/v) gelatin solution were considered as the experimental variables at fixed flow rate, fabricating time, and distance between the needle tip and fiber collector. The diameter trend of the electrospun nanofibers increased with the increase of the operating voltage and the biosurfactant ratio. The contact angle between the nanofiber surface and water droplet was greater when compared with that of gelatin nanofiber without the biosurfactant. The percentage of the biosurfactant would affect the porosity of the obtained nanofiber mat. The most suitable gelatin nanofiber for wound healing and covering application under this study was obtained from 25% (w/w) lipopeptide biosurfactant in gelatin solution at 6 kV operating voltage. These nanofibers also showed reasonably antimicrobial property against E. coli and S. aureus. The novelty found in this study is that the percentage of water uptake which is one of the most important factors for wound healing and covering materials of the obtained electrospun nanofibers is much better than that of the commercially one used nowadays.

Electrospun thyme essential oil/gelatin nanofibers for active packaging against Campylobacter jejuni in chicken

Campylobacter jejuni (C. jejuni) contamination on poultry surface posed great threats to meat industry and human health. In order to control the propagation of C. jejuni, the gelatin nanofibers containing thyme essential oil/β-cyclodextrin ε-polylysine nanoparticles (TCPNs) were engineered. Firstly, TCPNs were successfully fabricated via ionic gelation. The prepared TCPNs showed excellent antimicrobial activity against C. jejuni, which caused membranolysis and protein leakage of C. jejuni. Subsequently, TCPNs were incorporated into gelatin nanofibrous matrix via electrospinning to produce antimicrobial nanofibers. Uniformly disordered fibrous structure with good continuity and fine diameter distribution was observed. Finally, the aerobic bacterial count, thiobarbituric acid, total volatile basic nitrogen, pH, color and texture of meat samples packaged with the nanofibers were detected. The results implied the TCPNs embedded gelatin nanofibers had a promising prospect in meat preservation without impact on sensory evaluation.

Study on wettability, mechanical property and biocompatibility of electrospun gelatin/zein nanofibers cross-linked by glucose

In this study, the gelatin/zein nanofibers were electrospun and then cross-linked by glucose via Maillard reaction. The morphology observations showed that the average diameter of the cross-linked gelatin/zein nanofibers decreased with the increasing weight ratio of zein. FTIR results indicated that gelatin and zein molecules were homogenously dispersed within the fibers, and the Maillard reaction occurred between the proteins and glucose. The addition of zein affected the mobility of the gelatin chains, leading to the decreased denaturation temperature. The cross-linked fibers with a 1:1 gelatin/zein ratio showed the most hydrophobic surface (water contact angle of 134°), and comparable mechanical properties to the cross-linked gelatin nanofibers, while a higher ratio of zein (more than 50%) resulted in the decreased elastic modulus. The L929 cell cytotoxicity test suggested that the cross-linked gelatin/zein nanofibers exhibited good biocompatibility and non-cytotoxicity.