In order to improve the thermal performance of the thermal systems and raise the rate at which heat can be transferred, it is common practice to employ procedures that augment heat transmission. There are several different types of turbulators that can be inserted into the flow of the duct in order to provide an interruption of the development of a thermal boundary layer, to increase the heat transfer surface area, and to cause an enhancement of heat transfer by either increasing the intensity of the turbulence or by increasing the rate at which the fluid is mixed. A gas turbine provides the motive power for jet propulsion. It also uses in electric power generation and in certain industrial processes, as well as consider its role in marine, locomotive, and automotive propulsion. The most important use of gas turbines is in the aviation industry. Pressure ratio and turbine inlet temperature are prominent phenomena that influence the thermal efficiency of turbines. By increasing the pressures and inlet temperature of the turbine, the thermal efficiency also increases. It has an adverse effect on turbine blade material because of surface erosion. The current conversation provided some insight on the topic of gas turbines' need for cooling. This study produces probable improvement in turbine blade cooling by the application of different internal structures and geometric of flow passages. This paper focuses on different designs, construction and investigates turbine blade cooling.