Basic Principles Research Articles

B - 122 A Preliminary Analysis of the Neuropsychological Evaluation of the UPSA (NEUPSA)

Abstract Objective The UCSD Performance Skills Assessment (UPSA) is a well-established performance instrument created to evaluate functional outcomes. We applied a neuropsychological framework to the UPSA and created the Neuropsychological Evaluation of the UPSA (NEUPSA), assessing the cognitive processes that underlie the functional tasks in the UPSA. The study aimed to compare the executive function and attention components of the NEUPSA with a validated computerized cognitive assessment. Methods Participants were 86 adults drawn from the San Diego community. Participants completed the UPSA, 5 Choice CPT (5CCPT) which evaluates attention by calculating a d-prime score that assesses sustained attention, and the Iowa Gambling Task (IGT) which assesses risky decision making. We employed a Spearman’s correlation analysis with a 95% confidence interval to assess the strength of the relationship between NEUPSA attention scores and 5CCPT and IGT performance. Results NEUPSA subscores were significantly correlated with performance on computerized cognitive assessments. 5CCPT scores were positively correlated with NEUPSA attention scores (r = 0.24, p = 0.03). IGT scores were positively correlated with NEUPSA executive functioning scores (r = 0.23, p = 0.04). Conclusion These findings provide preliminary evidence that the NEUPSA assesses aspects of attention (i.e., sustained attention) and executive function (i.e., risky decision making). Further research, however, needs to be conducted on the validity of this measure and the utility in assessing neuropsychological function in clinical populations. Next steps include assessing NEUPSA performance in various non-healthy comparison populations. In this study, we emphasize the fundamental cognitive principles necessary for performance, offering a promising avenue for comprehending impaired functioning.

Atomic Spalling of a van der Waals Nanomembrane.

ConspectusThe vertical integration of van der Waals nanomembranes (vdW NMs), composed of two-dimensional (2D) layered materials and three-dimensional (3D) freestanding films with vdW surfaces, opens new avenues for exploring novel physical phenomena and offers a promising pathway for prototyping ultrathin, superior-performance electronic and optoelectronic applications with unique functionalities. Achieving the desired functionality through vdW integration necessitates the production of high-quality individual vdW NMs, which is a fundamental prerequisite. A profound understanding of the synthetic strategies for vdW NMs, along with their fundamental working principles, is crucial in guiding the experimental design toward 3D integrated heterostructures. The foremost synthetic challenges in fabricating high-quality vdW NMs are achieving exact control over thickness and ensuring surface planarity on the atomic scale. Despite the development of numerous chemical and mechanical approaches to tackle these issues, an all-encompassing solution has yet to be realized. To address these challenges, we have developed advanced spalling techniques, specifically known as atomic spalling or 2D material-based layer transfer, which emerge as a promising technology for achieving both atomically precise thickness-engineered and atomically smooth vdW NMs. These techniques involve engineering the interfacial fracture toughness and strain energy in the vdW system, allowing for precise control over the initiation and the propagation of cracks within the vdW material based on controlled spalling theory.In this Account, we summarize our recent advancements in the atomic precision spalling technique for the preparation of vdW NMs and their applications. We begin by introducing the fundamentals of advanced spalling techniques, which are based on spalling mode fracture in bilayer systems. Following this, we succinctly describe the preparation methods for source materials for vdW NMs, with a primary focus on chemical synthesis approaches. We then delve into the working principles underlying our recent contributions to advanced spalling techniques, providing insights into how this method attains unprecedented atomic-precision control compared to other fabrication methods with a particular emphasis on tuning the interface between the stressor and the vdW system. Subsequently, we highlight cutting-edge applications based on vdW heterostructures, which combine our spalled vdW NMs. Finally, we discuss the current challenges and future directions for advanced spalling techniques, underscoring their potential to be established as a robust methodology for the preparation of high-quality vdW NMs. Our advanced spalling strategy not only ensures the reliable production of vdW NMs with exceptional control over thickness and atomic-level flatness but also provides a robust theoretical framework essential for producing high-quality vdW NMs.

Demystifying Velopharyngeal Dysfunction for Plastic Surgery Trainees-Part 1: Anatomy and Physiology.

The velopharyngeal (VP) port separates the nasopharynx from the oropharynx and is bordered by the velum, lateral pharyngeal walls, and posterior pharyngeal wall. Velopharyngeal dysfunction (VPD) is the inability to achieve proper closure of the VP port, affecting speech and swallowing. This 3-part series provides a comprehensive discussion on (1) the anatomy and physiology of the velopharyngeal mechanism; (2) fundamental speech terminology and principles of perceptual speech assessment for VPD; and (3) techniques for objective evaluation of the VP port and surgical decision-making process. In part 1, the authors focus on the anatomy and physiology of the velopharyngeal port, the anatomy of cleft palate, and the causes of VPD. There are 3 types of VPD: velopharyngeal insufficiency, involving structural deficits; velopharyngeal incompetence, resulting from neuromuscular issues; and velopharyngeal mislearning, due to maladaptive speech habits. VPD is commonly associated with cleft palate due to anatomic disruptions that impair velopharyngeal function. However, there are numerous causes of noncleft VPD, including congenital or acquired structural defects, neuromuscular conditions, and developmental/behavioral factors. Diagnosis and management of VPD require a multidisciplinary approach involving, at a minimum, surgeons and speech-language pathologists. Plastic surgery trainees often receive education on the surgical treatment of VPD, but without a foundational knowledge of the disease spectrum and speech pathology, the complex terminology can impede a thorough understanding of its diagnosis and management. This series serves as an accessible resource, providing the foundational knowledge required for surgical trainees new to this topic.

Demystifying Velopharyngeal Dysfunction for Plastic Surgery Trainees Part 2: Speech Fundamentals and Perceptual Speech Assessment.

Velopharyngeal dysfunction (VPD) is the inability to achieve proper closure of the velopharyngeal (VP) port, affecting speech and swallowing. The gold standard for diagnosis is auditory-perceptual speech evaluation by a specialized speech-language pathologist. This 3-part series provides a comprehensive discussion on (1) the anatomy and physiology of the velopharyngeal mechanism, (2) fundamental speech terminology and principles of perceptual speech assessment for VPD, and (3) techniques for objective evaluation of the VP port and surgical decision-making process. In part 2, the authros begin with the concepts and terminology required to understand the perceptual speech assessment of VPD, including resonance, articulation, and the differentiation between consonants and vowels. We review the types of speech samples used for evaluation such as single-word articulation tests, syllable repetition, sentence repetition, and spontaneous connected speech. Finally, we discuss the auditory-perceptual speech assessment for VPD, including the assessment of resonance, nasal air emission, articulation, and voice quality. The use of rating scales like the Pittsburgh Weighted Speech Scale (PWSS) and the Cleft Audit Protocol for Speech-Augmented-Americleft Modification (CAPS-A-AM) is highlighted. In addition, the significance of intraoral examinations, visual-tactile-auditory evaluations, and the assessment of voice quality are covered. Most textbook chapters discussing this topic assume a foundational knowledge of speech-language pathology, which a surgical trainee may lack. This study aimed to bridge the gap between surgical training and speech pathology, providing a comprehensive resource to enhance the understanding and management of VPD.

Workshop-based training of pre-hospital emergency technicians for acute psychiatric patients: benefits and drawbacks

BackgroundPre-hospital emergency technicians are crucial in managing patients with acute psychiatric symptoms. They must quickly assess the condition, make a primary diagnosis, and refer the patient to the appropriate treatment center. Insufficient skills in these situations can cause serious harm. Educating technicians on dealing with these patients may enhance their knowledge and skills; however, we do not know the extent and longevity of this improvement and which areas are affected. This study investigates the impact of training on pre-hospital emergency technicians’ knowledge and skills.MethodsThis quasi-experimental study involved pre-hospital emergency technicians in Robat Karim and Nasim Shahr counties from December 2022 to January 2022. The technicians received workshops on interacting with psychiatric patients. The training topics included the basic principles of coping with a psychiatric patient. They also covered a step-by-step approach to dealing with an aggressive patient, dealing with a patient threatening suicide, managing agitation, managing a patient suffering from panic attacks, and finally dealing with a delirious patient. A pre-test assessed their baseline knowledge and skills, followed by a post-test after training and another test three months later. The test results were analyzed.ResultsThis study involved forty male participants ranging in age from 25 to 44 and with work experience ranging from five to twenty years. As a result of training in dealing with acute psychiatric patients, technicians developed significant skills and knowledge immediately after training, and these improvements remained significant three months after training. Nevertheless, the correct answers decreased during the three-month follow-up compared to the pre-test. Education was less effective at managing panic, delirium, and agitation.ConclusionIn conclusion, technicians’ knowledge and skills can be effectively enhanced through training; however, the impact diminishes with time. Theories and practical methods, periodic repetition, and real-world internships are the best ways to maximize training effectiveness.

Problems of Implementation of Approaches to Identification of the Victims of Military Aggression on the Territory of Ukraine and Ways to Solve Them

The war in Ukraine has triggered a number of socially negative phenomena, including high mortality rates and a massive influx of mutilated, depersonalized victims of armed conflicts who need to be identified. Despite all the measures taken by the authorities, there are still a large number of unidentified corpses in Ukraine. At the same time, the course toward European integration requires addressing a number of issues related to ensuring the basic principles of international humanitarian law, according to which the body of every deceased person has the right to be identified and handed over to relatives for burial.

Understanding the Selective Removal of Perfluoroalkyl and Polyfluoroalkyl Substances via Fluorine-Fluorine Interactions: A Critical Review.

As regulatory standards for per- and polyfluoroalkyl substances (PFAS) become increasingly stringent, innovative water treatment technologies are urgently demanded for effective PFAS removal. Reported sorbents often exhibit limited affinity for PFAS and are frequently hindered by competitive background substances. Recently, fluorinated sorbents (abbreviated as fluorosorbents) have emerged as a potent solution by leveraging fluorine-fluorine (F···F) interactions to enhance selectivity and efficiency in PFAS removal. This review delves into the designs and applications of fluorosorbents, emphasizing how F···F interactions improve PFAS binding affinity. Specifically, the existence of F···F interactions results in removal efficiencies orders of magnitude higher than other counterpart sorbents, particularly under competitive conditions. Furthermore, we provide a detailed analysis of the fundamental principles underlying F···F interactions and elucidate their synergistic effects with other sorption forces, which contribute to the enhanced efficacy and selectivity. Subsequently, we examine various fluorosorbents and their synthesis and fluorination techniques, underscore the importance of accurately characterizing F···F interactions through advanced analytical methods, and emphasize the significance of this interaction in developing selective sorbents. Finally, we discuss challenges and opportunities associated with employing advanced techniques to guide the design of selective sorbents and advocate for further research in the development of sustainable and cost-effective treatment technologies leveraging F···F interactions.

Review on Recent Advances of Nickel Sulfide Nano Electrocatalysts for Hydrogen Evolution

AbstractHydrogen is an important energy carrier without carbon emissions. To achieve a carbon‐neutral world, the demand for hydrogen is very significant. In the process of producing green hydrogen, water splitting using electrocatalysts is a desirable process among many methods. The ideal electrocatalyst for hydrogen evolution is the platinum group of metals; however, the limitations of high cost and low abundance hinder large‐scale hydrogen production. Hence, researchers are trying to develop materials from more abundant and less expensive. Hence, in this review, we focus on the fundamental principles of hydrogen evolution reaction (HER) and various synthesis methods and strategies. From the material perspective, we focus on nickel sulfide‐based nanomaterials of different phases during the last four years of development. We compared the electrocatalyst parameters concerning the synthesis methods and strategies chosen. Finally, we have also discussed future challenges. Ultimately, by synthesizing the collective knowledge amassed in the field of HER research, this review endeavors to offer a comprehensive resource for researchers, engineers, and policymakers striving to advance hydrogen‐based energy technologies. In doing so, we aspire to foster continued innovation and collaboration toward realizing a sustainable energy future powered by hydrogen.

Recent progress of cataluminescence sensing based on gas-solid interfaces.

Cataluminescence (CTL) has emerged as a sensing transduction principle of gas-solid interface for constructing gas sensors that present fast response, high sensitivity, and online monitoring. It has thus been widely associated with the field of chemical analysis and catalytic science. Herein, the latest developments in CTL sensors are reviewed, and the status quo of CTL-based gas sensing systems is discussed. In particular, the basic principles and sensing systems of CTL are outlined, including performance enhancement strategies for specific targets and recognition methods for multiple targets. Moreover, the important applications of CTL sensors are listed and classified, including environmental pollutant monitoring, product quality control, clinical diagnosis, and evaluation of catalyst performance. Finally, based on abundant case reports, the current conundrums of CTL sensors are summarized and their future development trends are also put forward.

Geometrical morphology and deformation measurement of long-span suspension bridge based on terrestrial laser scanning

Long-span suspension bridges necessitate deformation measurements for proper evaluation and upkeep. However, conventional approaches are unable to collect continuous spatial deformation data, which severely restricts their application in structural research. This paper presents a reliable and efficient method for measuring the deformation of suspension bridges using 3D laser scanning, including planning the scanning route, preprocessing the point cloud data, and extracting the deformation indicators. The method plans the scanning route based on experience and basic path planning principles to achieve both efficiency and precision, preprocesses the point cloud data by 3-stage denoising and curvature-based downsampling to preserve valuable point data better, and then proposes an extraction procedure for different types of deformation indicators. A field test on a typical long-span suspension highway bridge is performed, and the data processing and results extraction details are introduced. The accuracy and consistency of measurement results are discussed to verify the reliability of the proposed approach. The verified data provides useful information for the evaluation and maintenance of the bridge.

Understanding the Carbon Additive/Sulfide Solid Electrolyte Interface in Nickel-Rich Cathode Composites and Prioritizing the Corresponding Interplay between the Electrical and Ionic Conductive Networks to Enhance All-Solid-State-Battery Rate Capability.

All-solid-state lithium batteries, including sulfide electrolytes and nickel-rich layered oxide cathode materials, promise safer electrochemical energy storage with high gravimetric and volumetric densities. However, the poor electrical conductivity of the active material results in the requirement for additional conducive additives, which tend to react negatively with the sulfide electrolyte. The fundamental scientific principle uncovered through this work is simple and suggests that the electrical network benefits associated with the introduction of short-length carbons will eventually be overpowered by the increase in bulk resistance associated with their instability in the sulfide electrolyte. However, applying just the right amount of short carbon fibres minimizes degradation of the sulfide solid electrolyte and maximizes the electron movement. Therefore, we propose the application of a low-weight-percent carbon nanotubes (CNTs) coating on the nickel-rich cathode LiNi0.8Co0.1Mn0.1O2 (NCM811) along with large-aspect-ratio carbon nanofibers (CNFs) as the primary conductive additive. When only 0.3 wt % CNTs was utilized with 4.7 wt % CNFs, an initial Coulombic efficiency of 83.55% at 0.05C and a notably excellent capacity retention of 90.1% over 50 cycles at 0.5C were achieved along with a low ionic resistance. This work helps to confirm the validity of applying short carbon pathways in sulfide-electrolyte-based cathode composites and proposes their combination with a larger primary carbon additive as a solution to the ongoing all-solid-state battery rate and instability issues.

Reconstruction of the Mudharabah Financing Agreement at Bank Syariah Indonesia

This research was motivated by the lack of maximum mudharabah financing due to the high risk experienced by Islamic banking. In addition, Islamic banks are extra careful in channeling mudharabah financing. This study aims to find out what the results of the reconstruction of mudharabah financing look like. Relating to rebuilding the mudharabah contract, the aims and practices align with what is determined in accordance with the basic principles of Islamic banking. Researchers use qualitative phenomenological approaches that are descriptive, analytical and inductive. This research seeks to explore data to find the basics of phenomena, reality and experience. This research uses documentary studies and studies of theories to explain and conclude the problems raised. This research is descriptive, which means it describes or describes a situation, symptoms, and events. In this case, to find out problems related to the status of Islamic banking as shahibul mal in the mudharabah contract that occurred at Bank Syariah Indonesia (BSI) Regional South Sulawesi. From various related information, from references that discuss mudharabah transactions and their application in Islamic banking that occur at Bank Syariah Indonesia (BSI) South Sulawesi Regional. This study concluded that the reconstruction carried out at BSI still did not go as expected. There are still many obstacles faced, including in determining profits. Meanwhile, the mudharabah contract applied at BSI is free from maysir, gharar, and usury elements—Mudharabah financing practices. The profit-sharing ratio given to mudharabah financing benefits both banks and customers. Profit sharing system where operational costs must reduce the profit earned by the fund manager and must also return the funds provided by shahibul maal therefore the profit obtained by the mudharib is by what is agreed. Various customers have felt this financing because customers who previously did not have the capital to do business with this financing customers can have capital provided by the BSI Regional South Sulawesi Bank. In practice, the distribution of profits between the two parties is based on a pre-agreed ratio. The ratio is the share of business profits for each party whose amount is determined based on the agreement. The partnership relationship in mudharabah financing is a collaboration between shahibul maal to provide funds. In contrast, the other party, mudharib, provides his mind, energy, and time to manage the cooperation business. The most important element in mudharabah financing cooperation is trust. This belief is mainly from shahibul maal to mudharib. Shahibulmaal should act as a supervisor to the mudharib to avoid business risks. The author advises BSI always to supervise customers when managing funds provided by banks in order to create transparency between the bank and customers. The bank should analyze the character and ability of prospective customers first before providing financing to customers to run a business and manage the funds provided by the bank, in order to minimize losses obtained by shahibul mall and can establish transparent cooperation and in accordance with Islamic economic principles

An exploratory study of cervical disc degeneration model and mechanism of acupuncture therapy in rabbits

Acupuncture is an important therapy method in traditional Chinese medicine for treating intervertebral disc degeneration (IVDD), offering a wide range of applications. It is based on the theory of Chinese veterinary medicine and combines the stage of the disease course and individual differences for syndrome differentiation and treatment. However, there are few studies on the acupuncture treatment of cervical disc degeneration (CDD) in rabbits. Treatment based on syndrome differentiation is the basic principle of Chinese veterinary treatment. The selection of acupoints for external treatment should be based on individual etiology and pathogenesis. Nevertheless, most current studies do not follow this guideline. In this study, we established the CDD model and explored the mechanism of acupuncture treatment in alleviating CDD in rabbits by selecting a group of main acupoints including cervical Jiaji, Fengchi, Tianzhu, Naohu, Dazhui, and Houxi acupoints, combined with Western medicine's understanding of the pathogenesis of cervical spondylosis, from the anti-inflammatory, analgesic, and tissue-repairing perspectives. Magnetic resonance imaging (MRI) confirmed the successful establishment of the rabbit CDD model. Acupuncture stimulation reduced the increase of average and maximum neck temperature due to CDD in rabbits. The acupuncture treatment relieved the spinal disc damage in the neck of the rabbit, which also decreased the expression level of pro-apoptotic factor Bax and increased the expression level of anti-apoptotic factor Bcl-2. In addition, it can alleviate the abnormal apoptosis of rabbit intervertebral disc, decrease the expression level of inflammatory factors such as TNF-α, IL-1β, IL-2, and PGE2α, and alleviate the intense inflammation and pain response caused by CDD in rabbits. In conclusion, Acupuncture treatment can slow down the CDD of rabbits by regulating the inflammatory response and abnormal apoptosis of intervertebral disc tissue.

Protein nanopore-based sensors for public health analyte detection.

High-throughput and label-free protein nanopore-based sensors are extensively used in DNA sequencing, single-protein analysis, molecular sensing and chemical catalysis with single channel recording. These technologies show great potential for identifying various harmful substances linked to public health by addressing the limitations of current portability and the speed of existing techniques. In this review, we provide an overview of the fundamental principles of nanopore sensing, with a focus on chemical modification and genetic engineering strategies aimed at enhancing the detection sensitivity and identification accuracy of protein nanopores. The engineered protein nanopores enable direct sensing, while the introduction of aptamers and substrates enables indirect sensing, translating the physical structure and chemical properties of analytes into readable signals. These scientific discoveries and engineering efforts have provided new prospects for detecting and monitoring trace hazardous substances.

Color Design for Daytime Radiative Cooling: Fundamentals and Approaches

The escalating global energy crisis and the worsening global warming have intensified the heat threats posed by high temperatures. Traditional cooling methods like air conditioning are not only energy-intensive but also contribute to environmental degradation. In response, there is a pressing demand for novel, eco-friendly cooling technologies, particularly amid the growing global push for carbon neutrality. As a passive cooling method that does not require any extra power input, radiative cooling offers a promising solution, utilizing thermal radiation to cool the Earth by transferring heat directly to outer space. However, current radiative cooling materials generally have a monotonous white appearance due to their high reflectivity to solar radiation, which, considering their prospects for outdoor applications, has prompted the need for color design. Recent advancements have led to the development of colored passive radiative cooling (CPRC) materials, offering passive cooling without additional energy input, colorful aesthetic appearance, and facile preparation methods. In this review, the latest progress in CPRC materials are summarized, covering fundamental principles, various color design solutions, and potential applications. Besides, the coloration strategy including chemical, structural, and luminescent approaches for CPRC are comprehensively analyzed, providing insights into the future development and deployment of CPRC materials for outdoor energy efficient systems and thermal regulation.

Harvesting Water Energy through the Liquid-Solid Triboelectrification.

The escalating energy and environmental challenges have catalyzed a global shift toward seeking more sustainable, economical, and eco-friendly energy solutions. Water, capturing 35% of the Earth's solar energy, represents a vast reservoir of clean energy. However, current industrial capabilities harness only a fraction of the energy within the hydrological cycle. The past decade has seen rapid advancements in nanoscience and nanomaterials leading to a comprehensive exploration of liquid-solid triboelectrification as a low-carbon, efficient method for water energy harvesting. This review explores two fundamental principle models involved in liquid-solid triboelectrification. On the basis of these models, two distinct types of water energy harvesting devices, including droplet-based nanogenerators and water evaporation-induced nanogenerators, are summarized from their working principles, recent developments, materials, structures, and performance optimization techniques. Additionally, the applications of these nanogenerators in energy harvesting, self-powered sensing, and healthcare are also discussed. Ultimately, the challenges and future prospects of liquid-solid triboelectrification are further explored.

Heteroatom Immobilization Engineering toward High-Performance Metal Anodes.

Heteroatom immobilization engineering (HAIE) is becoming a forefront approach in materials science and engineering, focusing on the precise control and manipulation of atomic-level interactions within heterogeneous systems. HAIE has emerged as an efficient strategy to fabricate single-atom sites for enhancing the performance of metal-based batteries. Despite the significant progress achieved through HAIE in metal anodes for metal-based batteries, several critical challenges such as metal dendrites, side reactions, and sluggish reaction kinetics are still present. In this review, we delve into the fundamental principles underlying heteroatom immobilization engineering in metal anodes, aiming to elucidate its role in enhancing the electrochemical performance in batteries. We systematically investigate how HAIE facilitates uniform nucleation of metal in anodes, how HAIE inhibits side reactions at the metal anode-electrolyte interface, and the role of HAIE in promoting the desolvation of metal ions and accelerating reaction kinetics within metal-based batteries. Finally, we discuss various strategies for implementing HAIE in electrode materials, such as high-temperature pyrolysis, vacancy reduction, and molten-salt etching and anchoring. These strategies include selecting appropriate heteroatoms, optimizing immobilization methods, and constructing material architectures. They can be utilized to further refine the performance to enhance the capabilities of HAIE and facilitate its widespread application in next-generation metal-based battery technologies.

Metal-enhanced carbon-nitrogen material for selective detection of hazardous gases: Insights from interface electronic states

In this study, utilizing density functional theory, the C3N1 monolayer modified by Ir, Pd, Pt, and Rh atoms (Ir/Pd/Pt/Rh-C2N1) was chosen for selective adsorption of C2H2 amidst multiple gases (H2O, C2H2, and C4H10O2). According to the results of cohesive energy and ab initio molecular dynamics simulations, it is indicated that precious metal atoms can be stably anchored on the monolayer while enhancing the conductivity of the material The analysis of the electrostatic potential and work function determined the highly active sites and electron release capacity. In addition, the adsorption energy and distance disclosed the gas-solid interface structure of multiple gases on the Ir/Pd/Pt/Rh-C2N1 monolayer. Importantly, C2H2 exhibits strong responses to p-type semiconductor Pt-C2N1 and n-type semiconductor Ir-C2N1, respectively. Crystal Orbital Hamilton Population reveals the difference in adsorption energy due to modifications involving four precious metals. Interestingly, for the first time, the density of states calculation reveals that under the coexistence of multiple gases, the Pt/Ir-C2N1 monolayer effectively eliminates the interference of other gases and has a unique response only to C2H2. In real situations, with the basis of Gibbs free energy and Einstein's law of diffusion, it was determined that Pt-C2N1 and Ir-C2N1 showed excellent hydrophobicity, a wider temperature range, and a low diffusion activation energy barrier. In summary, Pt-C2N1 and Ir-C2N1 detect C2H2 without interference, maintaining fundamental principles, responsiveness, stability, and versatility unaffected by external factors.

Review of photovoltaic power prediction based on artificial intelligence methods

With the continuous growth of global demand for renewable energy, photovoltaic power generation, as a clean and efficient form of energy, has received widespread attention. However, photovoltaic power is affected by various factors such as irradiance, temperature, resulting in significant fluctuations in its output power. Therefore, accurate prediction of photovoltaic power is of great significance for the stable operation of the power system. In recent years, the rapid development of artificial intelligence technology has provided new solutions for photovoltaic power prediction. This paper will review the photovoltaic power prediction based on artificial intelligence methods, introduce its basic principles, application status, and challenges, in order to provide useful insights in related fields.

What's New in Diode Laser Hair Removal?

ABSTRACTIntroductionLaser hair removal remains one of the most common procedures in cosmetic dermatology. It has always been challenging because of the higher competing epidermal melanocyte as the targeted hair chromophore is also melanin. As a result, to avoid unwanted side effects from laser therapy while maintaining high efficacy levels, the use of the right laser device, appropriate settings, and customized pre and posttreatment care are crucial. With more efficient versions of existing lasers in the market, the safety profile has been taken care of without compromising the efficacy. Diode lasers along with long pulsed Nd:YAG and alexandrite are considered as the safest hair removal lasers.ObjectiveTo summarize recent developments in diode laser hair reduction focusing on improvements in efficiency, safety, and patient compliance with recent innovations.Materials and MethodsA review of recent literature updates in diode laser hair reduction technology focusing on multiwavelength systems, safety profiles, and innovations in laser device was searched using keywords diode laser hair removal and mutliwavelength diode laser devices.ResultsCurrently, 810 nm diode laser is the most extensively used technology for the long term elimination of unwanted hair, thus establishing itself as an efficacious and safe modality. The rapid multiple pass in motion technique with lesser fluence and gradual heating of the skin epidermis was more well tolerated in patients than the higher fluence single shot method. Most popular combination of triple wavelength was 755, 810, and 1064 nm, which is considered most effective with least complications.ConclusionDiode lasers still remain the gold standard in laser hair removal especially on darker skin types. Recent innovations in diode laser have significantly improved the efficacy, safety, and patient compliance with hair reduction. Multiwavelength platforms seems to be the way forward, however the basic principles and certain problems like minimal pain, treating thin hair, paradoxical hair growth, white hair removal still remains a challenge.