Functionalized Carbon Nanotubes Research Articles

Ruthenium nanoparticles supported on functionalized carbon nanotubes as high-efficiency catalysts for ammonia borane hydrolysis

Developing high-activity catalysts for the hydrolysis of ammonia borane (NH3BH3; AB) is a crucial and urgent task, which is presently considered an effective strategy for hydrogen generation in the applications of portable proton exchange membrane fuel cells (PEMFCs). In this study, carbon nanotubes (CNTs) were modified by self-growth of metal-organic frameworks (MOFs) on their surfaces. As self-sacrificial templates, the carbonization of cobalt and nitrogen containing MOFs led to the modification of CNT. Subsequently, cobalt was transformed into cobalt phosphide (Co2P) via phosphatization to form Co2P/N co-decorated CNTs (NCP-CNTs). Ru/NCP-CNT catalysts were obtained by loading ruthenium nanoparticles (NPs) using a chemical reduction method and their catalytic performance for H2 production via the hydrolysis of AB was systematically investigated. Ru/NCP-CNTs exhibited excellent catalytic activity, with an initial high turnover frequency (TOF) of 193.9 molH2·molRu−1·min−1 and a low activation energy of 32.4 kJ·mol−1. The incorporation of Ru NPs and their excellent synergistic effect with the NCP-CNT supports can explain the improved performance. This work provides an updated approach for fabricating low-cost and high-efficiency catalysts for the hydrolysis of AB.

Effect of functionalization on the adsorption performance of carbon nanotube as a drug delivery system for imatinib: molecular simulation study

In this study, efficiency of functionalized carbon nanotube as a potential delivery system for imatinib anti-cancer drug was investigated. Accordingly, carboxyl and hydroxyl functionalized carbon nanotube were inspected as a notable candidate for the carriage of this drug in aqueous media. For this purpose, possible interactions of imatinib with pure and functionalized carbon nanotube were considered in aqueous media. The compounds were optimized in gas phase using density functional calculations. Solvation free energies and association free energies of the optimized structures were then studied by Monte Carlo simulation and perturbation method in water environment. Outcomes of quantum mechanical calculations presented that pure and functionalized carbon nanotubes can act as imatinib drug adsorbents in gas phase. However, results of association free energy calculations in aqueous solution indicated that only carboxyl and hydroxyl functionalized carbon nanotubes could interact with imatinib. Monte Carlo simulation results revealed that electrostatic interactions play a vital role in the intermolecular interaction energies after binding of drug and nanotube in aqueous solution. Computed solvation free energies in water showed that the interactions with functionalized carbon nanotubes significantly enhance the solubility of imatinib, which could improve its in vivo bioavailability.

Real-time, ultra-sensitive and label-free detection of OTA based on DNA aptamer functionalized carbon nanotube field-effect transistor

Ochratoxin A (OTA), widely recognized as a mycotoxin contaminant across various food products, poses significant health risks attributed to its nephrohepatotoxic and carcinogenic effects. Consequently, detecting OTA is crucial for ensuring food safety and preventing mycotoxicosis. In our study, we employed a carbon nanotube field-effect transistor (CNT FET) functionalized with DNA aptamers for targeted OTA detection. The sensor achieved a remarkably low detection threshold of 0.2 femtomolars (fM) in phosphate-buffered saline (PBS), enabling real-time detection of OTA over a broad concentration spectrum spanning from 8 fM to 80 pM. This research confirmed the sensor’s superior selectivity by effectively distinguishing OTA from non-target fungal toxins and showcased its rapid analysis capabilities across diverse complex matrices. Utilizing homogenized liquids from ten representative food samples for analysis, the sensor delivered real-time responses within 100 s, accurately identifying varying OTA concentrations down to 80 fM. In conclusion, this biosensor provides a label-free, highly sensitive, and rapid detection method for OTA, introducing novel solutions for effective mycotoxin surveillance in food safety. This biosensor also paves the way for the creation of a multiplex platform for concurrent monitoring of multiple fungal toxins.

Vibration energy harvesting in an FG-CNTRC circular microplate with a surface-bonded piezoelectric layer

Piezoelectric energy harvesting using circular microplate has great potential to power microelectromechanical systems (MEMS). This paper studies vibrational energy harvesting by creating a model of a thin-walled circular microplate with a base layer of functional gradient carbon nanotube reinforced composites (FG-CNTRC) and a piezoelectric surface layer. Using the extended modified couple stress theory and the rule of mixture, the size effect and the effective Young's and shear moduli of the carbon nanotube reinforced composite (CNTRC) plate are established. Then, the governing equations are derived through the Lagrange's equations, and the analytical solutions of the relevant physical quantities are obtained. The specific examples are used to investigate the influence of length scale, carbon nanotube distribution, excitation frequency, and the ratio of the upper and lower plate radii on displacement, voltage, and power.

Synergistic effect of gold nanoparticles decorated functionalized carbon nanotubes nanohybrids on the thermal, dielectric, and sensing properties of polyaniline ternary nanocomposites

AbstractThe synthesis of gold nanoparticles reinforced functionalized single‐walled/multi‐walled carbon nanotubes nanohybrid based polyaniline nanocomposites were carried out using in situ polymerization. The chemical interaction and nanostructured morphology of the synthesized nanocomposites are studied using ultraviolet–visible spectroscopy, Fourier transform infrared spectroscopy, Raman spectroscopy, x‐ray diffraction analysis, x‐ray photoelectron spectroscopy, and field emission scanning electron microscopy. Thermal stability of synthesized PANI/Au@f‐SWNTs is boosted by a magnitude of 30°C as compared with the pristine PANI matrix, which is attributed to a strong barrier effect because of the development of tortuous path that resulted from a uniform distribution of Au@f‐CNTs throughout the PANI matrix. For PANI/Au@f‐SWNTs, the AC conductivity and dielectric permittivity are improved by a value of 83.58 S/cm and 1.35 × 10−5 as well as the dielectric loss is reduced by a factor of 0.11 in comparison with the pure PANI matrix at an applied frequency of 106 Hz. PANI/Au@f‐SWNTs and PANI/Au@f‐MWNTs ternary nanocomposites exhibited excellent selectivity toward the hazardous Cr(VI) heavy metal ions in an aqueous medium with a limit of detection of 0.74 and 0.89 μM with a binding constant of 1.028 × 105 and 3.46 × 104 M−1, respectively, that can be selective and sensitive for the detection of Cr(VI) metal ions in water at trace level.

Why Carbon Nanotubes Improve Aqueous Nanofluid Thermal Conductivity: A Qualitative Model Critical Review

Media thermal conductivity is important in various heat-transfer processes. Many conventional fluid conductors suffered low conductivity and environmental issues. Therefore, research was active in finding out alternative systems, mostly relying on aqueous liquids that are low-cost and ecofriendly. After the emergence of carbon nanotubes (CNTs), with their many special structural, electrical and thermal properties, they have been examined for many applications, including heat-transfer processes. Adding CNTs to water yields CNT aqueous nanofluids that have been widely investigated as heat-transfer media. The literature shows that CNT addition improves water thermal conductivity and other water properties, such as viscosity, surface tension, freezing point and boiling point. The literature also shows that nanofluid thermal conductivity improvement is affected by CNT type and concentration, in addition to other factors such as surfactant addition. All these subjects were widely described in literature, focusing on experimental, modelling and theoretical accounts. Despite the wide literature, there exist inconsistencies and discrepancies between reports that need to be justified. In addition to technical papers, many reviews were published on various aspects of the subject including experimental results and mathematical modeling. However, the very basic question here is as follows: Why does adding CNT to water affect its thermal conductivity? In spite of the wide published literature, this issue was not targeted in a simple qualitative approach. This review provides a clear understanding of how CNTs improve thermal conductivity of aqueous nanofluids. A qualitative model is presented to explain mechanisms behind improvement as presented in the literature. CNT type effects are discussed with other factors such as aspect ratio, Reynold number, dispersion quality, composition, temperature and additives. CNT functionalization is described. Relations to estimate nanofluid thermal conductivity are discussed. The model will help specialists to tailor CNT aqueous nanofluid characteristics as desired by varying types and concentrations of CNT and surfactant, and other factors.

Enhanced degradation and removal of ciprofloxacin and ofloxacin through advanced oxidation and adsorption processes using environmentally friendly modified carbon nanotubes.

This study explores the utilization of adsorption and advanced oxidation processes for the degradation of ofloxacin (OFL) and ciprofloxacin (CIP) using a green functionalized carbon nanotube (MWCNT-OH/COOH-E) as adsorbent and catalyst material. The stability and catalytic activity of the solid material were proved by FT-IR and TG/DTG, which also helped to elucidate the reaction mechanisms. In adsorption kinetic studies, both antibiotics showed similar behavior, with an equilibrium at 30min and 60% removal. The adsorption kinetic data of both antibiotics were well described by the pseudo-first-order (PFO) model. Different advanced oxidation processes (AOPs) were used, and the photolytic degradation was not satisfactory, whereas heterogeneous photocatalysis showed high degradation (⁓ 70%), both processes with 30min of reaction. Nevertheless, ozonation and catalytic ozonation have resulted in the highest efficiencies, 90%, and 70%, respectively, after 30-min reaction. For AOP data modeling, the first-order model better described CIP and OFL in photocatalytic and ozonation process. Intermediates were detected by MS-MS analysis, such as P313, P330, and P277 for ciprofloxacin and P391 and P332 for ofloxacin. The toxicity test demonstrated that a lower acute toxicity was observed for the photocatalysis method samples, with only 3.1 and 1.5 TU for CIP and OFL, respectively, thus being a promising method for its degradation, due to its lower risk of inducing the proliferation of bacterial resistance in an aquatic environment. Ultimately, the analysis of MWCNT reusability showed good performance for 2 cycles and regeneration of MWCNT with ozone confirmed its effectiveness up to 3 cycles.

Effect of functionalized carbon nanotube on cement mortar: From experiment to DFT research

In this paper, functionalized nanotube-reinforced cementitious composites were prepared, and the mechanical property test results showed that the 28d flexural strength of the composite was increased by 41.58% at a hydroxylated carbon nanotube mass fraction of 0.08[Formula: see text]wt.% compared to the original cement mortar. Carboxylated carbon nanotubes with a mass fraction of 0.02%, on the other hand, increased the 28d compressive strength by 99.12%. Probing the effect of the presence of functional groups on carbon nanotubes on the CNT/C–S–H interface by first principles. The results showed that the shear strengths (11.392[Formula: see text]MPa and 14.130[Formula: see text]MPa) of hydroxylated carbon nanotubes and plain carbon nanotubes at the interface with cementitious (CNT-OH/CSH and CNT/CSH) were lower than the shear strengths (21.584[Formula: see text]MPa) of carboxylated carbon nanotubes at the interface with cementitious (CNT-COOH/CSH). The adsorption of functional groups on carbon nanotubes changes the electron distribution on the surface of carbon nanotubes. The introduction of carboxyl groups exacerbates the charge transfer between carbon nanotubes and cementitious groups and promotes the generation of solid chemical bonds. This is the reason that carboxylated nanotubes added as reinforcement to cement mortar give better strength to the composite than hydroxylated nanotubes.

Promoting Effect of Ball Milling on the Functionalization and Catalytic Performance of Carbon Nanotubes in Glycerol Etherification.

A facile and eco-friendly approach using in situ-generated 4-benzenediazonium sulfonate (BDS) was applied to prepare highly functionalized carbon nanotubes (CNTs). The effectiveness of this functionalization was additionally enhanced by a green and short-time ball milling process applied beforehand. The obtained BDS-modified CNTs presented significant activity in glycerol etherification, producing tert-butyl glycerol ethers, which are considered promising fuel additives. Excellent results of ~56% glycerol conversion and ~10% yield of higher-substituted tert-butyl glycerol ethers were obtained within just 1 h of reaction at 120 °C using a low catalyst loading of only 2.5 wt.%. Furthermore, the sulfonated CNTs were reusable over several reaction cycles, with only a minor decrease in activity. Additionally, the sample activity could be restored by a simple regeneration approach. Finally, a clear correlation was found between the content of -SO3H groups on the surface of CNTs and the catalytic performances of these materials in glycerol etherification. Improved interaction between functionalized ball-milled CNTs and the reactants was also suggested to positively affect the activity of these catalysts in the tested process.

Modulus-tunable multifunctional hydrogel ink with nanofillers for 3D-Printed soft electronics

Seamless integration and conformal contact of soft electronics with tissue surfaces have emerged as major challenges in realizing accurate monitoring of biological signals. However, the mechanical mismatch between the electronics and biological tissues impedes the conformal interfacing between them. Attempts have been made to utilize soft hydrogels as the bioelectronic materials to realize tissue-comfortable bioelectronics. However, hydrogels have several limitations in terms of their electrical and mechanical properties. In this study, we present the development of a 3D-printable modulus-tunable hydrogel with multiple functionalities. The hydrogel has a cross-linked double network, which greatly improves its mechanical properties. Functional fillers such as XLG or functionalized carbon nanotubes (fCNT) can be incorporated into the hydrogel to provide tunable mechanics (Young's modulus of 10–300 kPa) and electrical conductivity (electrical conductivity of ∼20 S/m). The developed hydrogel exhibits stretchability (∼1000% strain), self-healing ability (within 5 min), toughness (400–731 kJ/m3) viscoelasticity, tissue conformability, and biocompatibility. Upon examining the rheological properties in the modulated region, hydrogels can be 3D printed to customize the shape and design of the bioelectronics. These hydrogels can be fabricated into ring-shaped strain sensors for wearable sensor applications.

Flexible and Stretchable Electrodes for In Vivo Electrophysiological and Electrochemical Monitoring†

Comprehensive SummaryIn vivo monitoring of bioelectrical and biochemical signals with implanted electrodes has received great interest over the past decades. However, this faces huge challenges because of the severe mechanical mismatch between conventional rigid electrodes and soft biological tissues. In recent years, the emergence of flexible and stretchable electrodes offers seamless and conformable biological‐electronic interfaces and has demonstrated significant advantages for in vivo electrochemical and electrophysiological monitoring. This review first summarizes the strategies for electrode fabrication from the point of substrate and conductive materials. Next, recent progress in electrode functionalization for improved performance is presented. Then, the advances of flexible and stretchable electrodes in exploring bioelectrical and biochemical signals are introduced. Finally, we present some challenges and perspectives ranging from electrode fabrication to application.Key ScientistsIn 2001, a seminal work by Kipke et al. first showed flexible polyimide‐based intracortical electrode arrays.[1] This electrode was further expanded to 252‐channel using microelectromechanical systems technology by Stieglitz et al. in 2009 and achieved large‐scale cortical recordings.[2] Later, Lieber et al. created mesh electronics that allow for seamless and minimally invasive three‐dimensional interpenetration with nerve tissues, opening up unique applications for flexible electronics.[3] Subsequently, Rogers et al. described bioresorbable electronics for transient electrical activity recordings in 2016.[4] And Frank et al. proposed polymer electrode arrays capable of resolving single neurons in 2019.[5] It wasn't until 2020 that a significant breakthrough in biochemical signals monitoring by Peng et al. demonstrated functionalized carbon nanotube fibre bundles for multiple disease biomarkers monitoring.[6] Later on, Mooney et al. established the first fully viscoelastic electrode arrays for neural recordings from the brain and heart in 2021.[7] Recently, Bao et al. presented tissue‐mimicking, stretchable neurotransmitter interfaces for monitoring the brain and gut.[8]

Green synthesis of carbon nanotubes functionalized with iron nanoparticles and coffee husk biomass for efficient removal of losartan and diclofenac: Adsorption kinetics and ANN modeling studies

The presence of emerging contaminants in wastewater poses a global environmental challenge, requiring the development of innovative materials or methods for their treatment. This study focused on the production of green functionalized carbon nanotubes (CNTs) and using them in the adsorption of the pharmaceuticals Losartan (LOS) and Diclofenac (DIC). The efficiency of the methodology was verified by characterization techniques. Elemental composition analysis indicated a significant increase in the iron content after the green functionalization, proving the effectiveness of the method. Thermogravimetric analysis showed similar thermal degradation profiles for pristine CNTs and functionalized CNTs, indicating better post-functionalization thermal stability. BET analysis revealed mesoporous characteristics of CNTs, with increased surface area and pore volumes after functionalization. X-Ray diffraction confirmed the preservation of the lattice structure of the CNTs post-functionalization and post-adsorption, with changes in peak broadening suggesting surface modifications. LOS and DIC adsorption were evaluated via kinetic studies at four different concentrations (0.1–0.4 mmol/L) that were best represented by the pseudo-second order model, suggesting chemisorption mechanisms, with faster and higher uptakes for DIC (0.084–0.261 mmol/g; teq = 5 min) when compared to LOS (0.058–0.235 mmol/g; teq = 20 min). The curves were also studied via artificial neural networks (ANN) and revealed that the best ANN architecture for representing the experimental data is a network with [3 5 5 2] neurons trained using the Bayesian-Regularization algorithm and the Log-sigmoid (hidden layers) and Linear (output layer) transfer functions. The desorption study showed that CaCl2 had better performance in CNT regeneration, reaching its removal capacity above 50% up to 3 cycles, for both pharmaceuticals. These findings reveal the potential of the developed material as a promising adsorbent for targeted removal of pollutants, contributing to advances in the remediation of emerging contaminants and the application of artificial intelligence in adsorption research.

Locally controlled MOF growth on functionalized carbon nanotubes

Metal-organic frameworks (MOFs) are highly versatile materials because of their tunable properties. However, the typically poor electrical conductivity of MOFs presents challenges for their integration into electrical devices. By adding carbon nanotubes to MOF synthesis, a highly intergrown material with increased conductivity and chemiresistive sensing properties can be obtained. Here, we present a patterning technique to control MOF growth on predefined areas of one particular carbon nanotube. We found that electron beam pretreatment of -COOH functionalized multi-walled carbon nanotubes inhibits the growth of UiO-66 MOF on these multi-walled carbon nanotubes. By irradiating individual multi-walled carbon nanotubes, we show that MOF growth can be inhibited in predefined tube areas, creating MOF-free spaces on the nanotube. In this way, our method shows a possibility to pattern MOF growth on individual nanotubes.

A New Design Strategy Enables High Mn‐Utilization Rate in Aqueous Zinc–Manganese Batteries: Constructing Cathodic Local Mn‐Rich Region

AbstractThe deposition–dissolution mechanism with a two‐electron transfer reaction endows aqueous Zn–Mn batteries with a desirable theoretical energy density. However, due to the limited solubility of traditional manganese‐based materials and the competitive Mn shuttle behavior, the practical performance is unsatisfactory. Herein, by synergistically incorporating a novel Mn‐rich Mn4N cathode with a plasma functionalized carbon nanotubes film (PCNT) interlayer, an aqueous Zn–Mn battery with a high Mn‐utilization rate and high energy/power density is successfully developed. Specifically, the Mn4N cathode boasts high manganese content and dissolution activity, thereby offering a copious supply of Mn2+ ions for the battery system. The PCNT interlayer, with abundant micropore structures and functional groups, not only restrains the Mn2+ shuttle by entrapping the dissolved Mn2+ but also offers copious reaction sites, ensuring concentrating Mn2+ on the cathodic side and maximizing their contribution to the electrochemical reaction. Consequently, Mn4N‐PCNT exhibits a low polarization voltage and superior Mn‐utilization rate (64.8%). Without the MnSO4 additive, Mn4N‐PCNT achieves an ultra‐high energy density of 821.9 W h kg−1 and remarkable long‐term cycling stability (90% capacity retention over 9000 cycles). The delightful results demonstrate the practical application potential of Mn4N‐PCNT and open up new avenues for the rational design of advanced Zn–Mn batteries.

Fabrication and application of functionalized carbon nanotubes for highly sensitive and selective sensing of enrofloxacin

AbstractThis paper introduces an innovative electrochemical sensor that detects enrofloxacin (ENR) utilizing a glassy carbon electrode (GCE) modified with reduced carbon nanotubes (rCNT). The fabrication process involved a simple drop‐coating technique using water‐soluble oxidized CNTs (oCNT), followed by electrochemical reduction to obtain the rCNT/GCE electrode. The electrochemical properties of the modified electrodes, including GCE, CNT/GCE, oCNT/GCE, and rCNT/GCE, were evaluated using cyclic voltammetry and electrochemical impedance spectroscopy. The results demonstrated significantly improved electrochemical surface area and faster electron transfer rate for the rCNT/GCE electrode compared to the other configurations. Consequently, the rCNT/GCE electrode exhibited the highest electrochemical signal for ENR detection. Under optimized conditions, the rCNT/GCE‐based sensor displayed excellent performance for ENR detection. It achieved a low detection limit of 0.002 µm and demonstrated linearity within the ranges of 0.005–0.05 µm and 0.05–1.5 µm. Furthermore, the proposed sensor exhibited good selectivity, as well as excellent repeatability and reproducibility. To assess the sensor's practical utility, a quantitative analysis of ENR in shrimp meat samples was conducted. The results demonstrated the high sensitivity and accuracy of the proposed sensor in quantifying ENR, highlighting its potential as a reliable tool for environmental monitoring of water resources.

Functionalization of Carbon Nanotubes in Polystyrene and Properties of Their Composites: A Review.

The inherent π-π interfacial interaction between carbon nanotubes (CNTs) and polystyrene (PS) makes the CNT/PS composite a representative thermoplastic nanocomposite. However, the strong van der Waals force among CNTs poses challenges to achieving effective dispersion. This review provides an overview of various CNT functionalization methods for CNT/PS composites, encompassing covalent grafting with PS-related polymers and non-covalent modification. A focus in this section involves the pre-introduction surface modification of CNTs with PS or PS-related polymers, substantially enhancing both CNT dispersibility and interfacial compatibility within the PS matrix. Furthermore, a comprehensive summary of the mechanical, electrical, thermal, and electromagnetic shielding properties of CNT/PS nanocomposites is provided, offering an overall understanding of this material. The surface modification methods of CNTs reviewed in this paper can be extended to carbon material/aromatic polymer composites, assisting researchers in customizing the optimal surface modification methods for CNTs, maximizing their dispersibility, and fully unleashing the various properties of CNTs/polymer composites. Additionally, high-performance CNTs/PS composites prepared using appropriate CNT modification methods have potential applications in areas such as electronic devices, sensors, and energy storage and conversion.

Investigating the Influence of Diverse Functionalized Carbon Nanotubes as Conductive Fibers on Paper-Based Sulfur Cathodes in Lithium-Sulfur Batteries.

Lithium-sulfur (Li-S) batteries are expected to be one of the next generations of high-energy-density battery systems due to their high theoretical energy density of 2600 Wh kg-1. Embracing the trends toward flexibility, lightweight design, and cost-effectiveness, paper-based electrodes offer a promising alternative to traditional coated cathodes in Li-S batteries. Within paper-based electrodes, conductive fibers such as carbon nanotubes (CNTs) play a crucial role. They help to form a three-dimensional network within the paper matrix to ensure structural integrity over extended cycling while mitigating the shuttle effect by confining sulfur within the cathode. Herein, we explore how variously functionalized CNTs, serving as conductive fibers, impact the physical and electrochemical characteristics of paper-based sulfur cathodes in Li-S batteries. Specifically, graphitized hydroxylated carbon nanotubes (G-CNTs) exhibit remarkable capacity at low currents owing to their excellent conductivity and interaction with lithium polysulfide (LiPS), achieving the highest initial specific capacity of 1033 mAh g-1 at 0.25 C (1.1 mA cm-2). Aminated multi-walled carbon nanotubes (NH2-CNTs) demonstrate an enhanced affinity for LiPS due to the -NH2 groups. However, the uneven distribution of these fibers may induce electrode surface passivation during charge-discharge cycles. Notably, hydroxylated multi-walled carbon nanotubes (OH-CNTs) can establish a uniform and stable 3D network with plant fibers, showcasing superior mechanical properties and helping to mitigate Li2S agglomeration while preserving the electrode porosity. The paper-based electrode integrated with OH-CNTs even retains a specific capacity of approximately 800 mAh g-1 at about 1.25 C (5 mA cm-2), demonstrating good sulfur utilization and rate capacity compared to other CNT variants.

Superior energy storage and stability realized in flexible carbon nanotube aerogel-metal organic framework based supercapacitor via interface engineering

Our present study unveils a new carbon nanotube aerogel-metal organic framework free-standing electrode, showcasing exceptional dual functionality as an electrode and current collector. In the prepared electrode, an interface engineering between functionalized carbon nanotubes (FCNT) and metal-organic frameworks (MOF) leads to the excellent electrochemical performance of the supercapacitor. The carbon nanotube aerogel with its exceptional surface area and electrical conductivity, lays the foundation for lightning-fast charge transfer. Meanwhile, the metal-organic frameworks present at the interface, grant ions unbridled storage space contributing to efficient charge storage. The ulta-light-in-weight FCNT-MOF free-standing electrode exhibited an excellent specific capacitance of 465 F g−1 (116 mF cm−2) at 2 A g−1 with outstanding cyclic stability of 92 % after 6000 cycles. The flexible FCNT-MOF symmetric supercapacitor demonstrated a high energy density of 40.5 W h kg−1 at a power density of 1600 W kg−1. The simplified fabrication process, reduced active material requirements (0.25 mg cm−2), and enhanced performance make it an attractive option for supercapacitor application. Furthermore, the integration of this electrode design into supercapacitors holds great promise for portable electronics, electric vehicles, and renewable energy systems.

Evaluation of synthesized MWCNTs-COO@Fe3O4 nanocomposite based on laser-assisted method for highly-efficient clean water

In this study, the surface of MWCNTs was treated with acid by adding a carboxyl group to be ready to load nanostructured materials on their surface in a novel way. The femtosecond laser ablation process was used for decorating magnetic nanoparticles (Fe3O4) on the functionalized carbon nanotubes (MWCNTs-COOH) to form the MWCNTs-COO@Fe3O4 nanocomposite structure to be used for the heavy metal removal of Pb(II). Different techniques have all been used to identify the functionality groups that are present on the MWCNTs. Raman spectroscopy showed the decrease of G band when Fe3O4 nanoparticles embedded MWCNTs-COOH, indicating a greater degree of defect in MWCNTs. VSM showed the magnetic characteristic properties of the composite. XRD showed the reduction of MWCNTs diffraction peaks after embedding with iron oxide, explained the partial full coverage of the MWCNTs surface by the Fe3O4 nanoparticles. FT-IR showed the composite exhibit a peak at 579 cm−1, which is brought on by the Fe–O stretching vibrational modes. Zeta potential showed the surface of the MWCNTs-COO@Fe3O4 had a more positive charge under neutral pH compared with that of MWCNTs. TGA showed the weight loss of MWCNTs-COO@Fe3O4 was greater than that of MWCNTs, confirming the interaction of some Fe3O4 on MWCNTs-COOH. Also, tested pH, contact time, initial Pb (II) concentration, and adsorbent mass were carried to improve Pb (II) ion adsorption on the nanocomposite. The optimal removal effectiveness of Pb (II) on the MWCNTs-COO@Fe3O4 nanocomposite is attained when the experiment is conducted at a pH of 6, with a contact time of 10 min, an initial concentration of 100 mg/L, and under alkaline conditions. Pb (II) ions were adsorbing using a pseudo-second-order equation to reflect their chemical adsorption, with a rate constant of (k2 = 0.00446 g mg−1 min−1). The highest adsorption capacity obtained was 66.85 mg g−1. MWCNTs-COO@Fe3O4 nanocomposite efficiently collected Pb (II) utilizing green and easy to use method to protect public health.

Removal of organochlorine pesticides by nanofiltration membranes modified with NH2-MWCNTs

Excessive use of pesticides and therefore the spread of pesticides in the environment with destructive effects on human and animal health is a very great problem in the world. In this study, the removal of three samples of organochlorine pesticides including aldrin, lindane, and endosulfan was investigated using nanofiltration membranes modified with NH2-MWCNTs. The properties of the prepared membranes were investigated by scanning electron microscopy (SEM), contact angle, water content, porosity, and mechanical strength. The performance of the membranes was evaluated by analysis of the rejection and flux of pesticide solutions at different pH. The addition of NH2-MWCNTs to the polymer matrix significantly improved the hydrophilic properties of the membranes and reduced the contact angle. Membrane flux was also improved by increasing the concentration of carbon nanotubes to 0.2 wt%. The highest flux at pH 10 is related to lindane pesticide. The modified membrane with 0.5 wt% functionalized carbon nanotubes showed a 98% rejection for endosulfan at neutral pH compared to the pure membrane. In the pH range experiment, lindane rejection was lower than of other pesticides. The steric hindrance due to the structure and molecular size of pesticides and interaction with membrane surface was very important in membrane efficiency. The M3 membrane with 0.3 wt% NH2-MWCNTs revealed high antifouling performance.