Functional Scaffolds Research Articles

3D-printed scaffold harboring copper ions combined with near-infrared irradiation for local therapy of cancer

Cancer is a major health threat and a leading cause of human death worldwide. Surgical resection is the primary treatment for most cancers; however, some patients develop locoregional recurrence. Here, we developed an in situ cancer therapeutic system aimed to locally treat cancer and prevent postoperative recurrence. A functional scaffold, based on alginate/gelatin and crosslinked with copper ions, was fabricated by 3D printing and showed an excellent photothermal effect under near-infrared (NIR) irradiation. The combination of copper ions and NIR effectively killed thyroid cancer cells and patient-derived organoids, indicating a synergetic and broad-spectrum antitumor effect on thyroid cancer through the chemo-photothermal therapy. This implantable stent is designed to provide effective treatment in the vicinity of the tumor site and can be degraded without secondary surgery. The copper-loaded hydrogel scaffold may be a potential candidate for local cancer treatment and pave the way for precise and effective cancer therapy.

Surface topologized ovalbumin scaffolds containing YIGSR peptides for modulating Schwann cell behavior

Peripheral nerve injuries (PNI) currently have limited therapeutic efficacy, and functional scaffolds have been shown to be effective for treating PNI. Ovalbumin (OVA) is widely used as a natural biomaterial for repairing damaged tissues due to its excellent biocompatibility and the presence of various bioactive components. However, there are few reports on the repair of PNI by ovalbumin. In this study, a novel bionic functionalized topological scaffold based on ovalbumin and grafted with tyrosine-isoleucine-glycine-serine-arginine (YIGSR) peptide was constructed by micro-molding method and surface-biomodification technology. The scaffolds were subjected to a series of evaluations in terms of morphology, mechanics, hydrophilicity, and biocompatibility, and the related molecular mechanisms were further penetrated. The results showed that the scaffolds prepared in this study had aligned ridge/groove structure, good mechanical properties and biocompatibility, and could be used as carriers to slowly release YIGSR, which effectively promoted the proliferation, migration and elongation of Schwann Cells (SCs), and significantly up-regulated the gene expression related to proliferation, apoptosis, migration and axon regeneration. Therefore, the bionic functional topological scaffold has significant application potential for promoting peripheral nerve regeneration and provides a new therapeutic option for repairing PNI.

Pd-Catalyzed Remote δ-C(sp2)–H Functionalization in Phenylalaninol: Expanding the Library of Phenylalaninols

AbstractWe report the Pd(II)-catalyzed, picolinamide-directed δ-C(sp2)–H (ortho) functionalization of phenylalaninol scaffolds. Assembling of (ortho) δ-C–H arylated, alkylated, benzylated, alkenylated, brominated, and iodinated phenylalaninol scaffolds was accomplished. The δ-C(sp2)–H arylation reaction of phenylalaninol occurred under neat conditions. Hydrolysis of the picolinamide moiety and synthetic utility of the δ-C(sp2)–H arylated substrates were explored. We have also shown the preparation of some modified Matijin–Su (aurantiamide) derivatives using the bis δ-C–H (ortho) arylated phenylalaninol compounds obtained from the δ-C(sp2)–H arylation reaction (Matijin–Su is an anti-HBV agent possessing the phenylalaninol unit). Considering the importance of phenylalaninols, this work contributes to expanding the phenylalaninol library and demonstrates the substrate scope development in remote δ-C(sp2)–H functionalization reactions.

Crosslinked Collagen-Hyaluronic Acid Scaffold Enhances Interleukin-10 Under Co-Culture of Macrophages And Adipose-Derived Stem Cells.

The skin, the human body's largest organ, possesses a protective barrier that renders it susceptible to various injuries, including burns. Following burn trauma, the inflammatory process triggers both innate and adaptive immune responses, leading to the polarization of macrophages into two distinct phenotypes: the pro-inflammatory M1 and the anti-inflammatory M2. This dual response sets the stage for wound healing and subsequent tissue regeneration. Contributing to this transition from M1 to M2 polarization are human adipose-derived stem cells (ASCs), which employ paracrine signaling and inflammation suppression to enhance the remodeling phase. ASCs, when combined with biocompatible polymers, can be integrated into functional scaffolds. This study introduces an 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide-crosslinked (EDC-crosslinked) collagen-hyaluronic acid(Col-HA) scaffold assembled with ASCs, designed as a natural biomaterial device to modulate macrophage behavior in vitro under co-culture conditions. This innovation aims to improve wound healing processes. The EDC-crosslinked Col-HA scaffold favored the release of anti-inflammatory cytokines by ASCs, which indicated the M2 prevalence. In tissue engineering, a critical objective lies in the development of functional biomaterials capable of guiding specific tissue responses, notably the control of inflammatory processes. Thus, this research not only presents original findings but also points toward a promising avenue within regenerative medicine.

Incorporation of Cell-Adhesive Proteins in 3D-Printed Lipoic Acid-Maleic Acid-Poly(Propylene Glycol)-Based Tough Gel Ink for Cell-Supportive Microenvironment.

In extrusion-based 3D printing, the use of synthetic polymeric hydrogels can facilitate fabrication of cellularized and implanted scaffolds with sufficient mechanical properties to maintain the structural integrity and physical stress within the in vivo conditions. However, synthetic hydrogels face challenges due to their poor properties of cellular adhesion, bioactivity, and biofunctionality. New compositions of hydrogel inks have been designed to address this limitation. A viscous poly(maleate-propylene oxide)-lipoate-poly(ethylene oxide) (MPLE) hydrogel is recently developed that shows high-resolution printability, drug-controlled release, excellent mechanical properties with adhesiveness, and biocompatibility. In this study, the authors demonstrate that the incorporation of cell-adhesive proteins like gelatin and albumin within the MPLE gel allows printing of biologically functional 3D scaffolds with rapid cell spreading (within 7 days) and high cell proliferation (twofold increase) as compared with MPLE gel only. Addition of proteins (10% w/v) supports the formation of interconnected cell clusters (≈1.6-fold increase in cell areas after 7-day) and spreading of cells in the printed scaffolds without additional growth factors. In in vivo studies, the protein-loaded scaffolds showed excellent biocompatibility and increased angiogenesis without inflammatory response after 4-week implantation in mice, thus demonstrating the promise to contribute to the printable tough hydrogel inks for tissue engineering.

Modular and Practical 1,2‐Aryl(Alkenyl) Heteroatom Functionalization of Alkenes through Iron/Photoredox Dual Catalysis**

AbstractEfficient methods for synthesizing 1,2‐aryl(alkenyl) heteroatomic cores, encompassing heteroatoms such as nitrogen, oxygen, sulfur, and halogens, are of significant importance in medicinal chemistry and pharmaceutical research. In this study, we present a mild, versatile and practical photoredox/iron dual catalytic system that enables access to highly privileged 1,2‐aryl(alkenyl) heteroatomic pharmacophores with exceptional efficiency and site selectivity. Our approach exhibits an extensive scope, allowing for the direct utilization of a wide range of commodity or commercially available (hetero)arenes as well as activated and unactivated alkenes with diverse functional groups, drug scaffolds, and natural product motifs as substrates. By merging iron catalysis with the photoredox cycle, a vast array of alkene 1,2‐aryl(alkenyl) functionalization products that incorporate a neighboring azido, amino, halo, thiocyano and nitrooxy group were secured. The scalability and ability to rapid synthesize numerous bioactive small molecules from readily available starting materials highlight the utility of this protocol.

Modular and Practical 1,2-Aryl(Alkenyl) Heteroatom Functionalization of Alkenes through Iron/Photoredox Dual Catalysis.

Efficient methods for synthesizing 1,2-aryl(alkenyl) heteroatomic cores, encompassing heteroatoms such as nitrogen, oxygen, sulfur, and halogens, are of significant importance in medicinal chemistry and pharmaceutical research. In this study, we present a mild, versatile and practical photoredox/iron dual catalytic system that enables access to highly privileged 1,2-aryl(alkenyl) heteroatomic pharmacophores with exceptional efficiency and site selectivity. Our approach exhibits an extensive scope, allowing for the direct utilization of a wide range of commodity or commercially available (hetero)arenes as well as activated and unactivated alkenes with diverse functional groups, drug scaffolds, and natural product motifs as substrates. By merging iron catalysis with the photoredox cycle, a vast array of alkene 1,2-aryl(alkenyl) functionalization products that incorporate a neighboring azido, amino, halo, thiocyano and nitrooxy group were secured. The scalability and ability to rapid synthesize numerous bioactive small molecules from readily available starting materials highlight the utility of this protocol.

Surface Functionalization of Electrospun Scaffolds by QK-AG73 Peptide for Enhanced Interaction with Vascular Endothelial Cells.

Rapid endothelialization still remains challenging for blood-contacting biomaterials, especially for long-term, functional, small-diameter vascular grafts. The vascular endothelial growth factor (VEGF)-mimicking QK peptide holds great promise in promoting vascular endothelial cellular activities such as adhesion, spreading, proliferation, and migration. Syndecans are transmembrane proteoglycans that are highly expressed on cell surfaces, including vascular endothelial cells, which can act as docking receptors to provide binding sites for a variety of cellular growth and signaling molecules. Herein, a novel peptide QK-AG73 that coupled the QK domain with the syndecan binding peptide AG73 was proposed, aiming to synergistically enhance the interaction with vascular endothelial cells. In addition, mechanically matched bioactive scaffolds based on poly(l-lactide-co-ε-caprolactone) were successfully prepared by surface functionalization of the covalently combined QK-AG73 peptide. The result showed that the adhesion of human umbilical vein endothelial cells (HUVECs) was increased by approximately 2-fold on QK-AG73-modified surface compared with those modified with a single QK or AG73 peptide. Moreover, surface functionalization of electrospun scaffolds by this QK-AG73 peptide was more efficient in specifically promoting the proliferation of HUVECs and allowing them to grow with an elongated cobblestone-like cell morphology. It was hypothesized that both VEGF receptors and transmembrane syndecan receptors were involved in cellular regulation by the QK-AG73 peptide, which resulted in synergistic improvement of the interactions with vascular endothelial cells and provided a promising strategy to promote endothelialization of small-diameter vascular grafts.

Hierarchical NiCo@NiOOH@CoMoO4 Core-Shell Heterostructure on Carbon Cloth for High-Performance Asymmetric Supercapacitors.

The fabrication of low-cost, effective, and highly integrated nanostructured materials through simple and reproducible methods for high-energy-density supercapacitors is highly desirable. Herein, an activated carbon cloth (ACC) is designed as the functional scaffold for supercapacitors and treated hydrothermally to deposit NiCo nanoneedles working as internal core, followed by a dip-dry coating of NiOOH nanoflakes core-shell and uniform hydrothermal deposition of CoMoO4 nanosheets serving as an external shell. The structured core-shell heterostructure ACC@NiCo@NiOOH@CoMoO4 electrode resulted in exceptional specific areal capacitance of 2920 mF cm-2 and exceptional cycling stability for 10000 cycles. Moreover, the fabricated electrode is developed into an asymmetric supercapacitor which demonstrates excellent areal capacitance, energy density, and power density within the broad potential window of 1.7V with a cycling life of 92.4% after 10000 charge-discharge cycles, which reflects excellent cycle life. The distinctive core-shell structure, highly conductive substrate, and synergetic effect of coated material results in more electrochemical active sites and flanges for effective electrons and ion transportation. This unique technique provides a new perspective for cost-efficient supercapacitor applications.

Molecular sieving of L-arginine over L-lysine by α-Hydroxy acid functionalized ZnII-luminescent framework from aqueous medium and other biofluids: Experimental and DFT corroboration with logic gate construction

The present work exemplifies MOF as a unique functional scaffold for ultrasensitive monitoring of L-Arginine (Arg) over L-Lysine (Lys) and other amino acids from purely aqueous medium. In this context, a thermostable ZnII-functionalized MOF (viz. ZnII-CA-LMOF) has been synthesized utilizing α-hydroxy acid containing aliphatic ligand like citric acid (CA). The MOF provides an excellent platform for optical speciation of Arg over other competitive biohazards via “turn-on” fluorescence response with a limit of detection 3.3 ppb (R = 0.99) with response time of ∼90 s. Interestingly, the Zn-MOF has been exploited for detecting Arg from complex bio-fluids which are of immense clinical importance. Additionally, DFT studies shed light on the role of SBUs in non-covalent interaction between CA and targeted bio-hazards in a confined space which results in desired molecular sieving amongst different bio-analytes. Moreover, the host–guest interactions through “turn-off-on-off” have been utilized for fabricating molecular electronics. In brief, the demand of formulizing a single platform to rationalize the structure-performance synergies to fabricate smarter material has been properly emphasized in the current work.

Self‐Adaptive MoO3−xSubnanometric Wires Incorporated Scaffolds for Osteosarcoma Therapy and Bone Regeneration

AbstractResidual tumor cells and bone tissue defects are two critical challenges in clinical osteosarcoma treatment. Herein, a subnanomedicine concept is proposed by developing a self‐adaptive functional tissue engineering scaffold constructed by integrating MoO3−xsubnanometric wires onto 3D printing bioactive glass scaffolds. The MoO3−xsubnanometric wires are synthesized by a one‐pot hydrothermal method, which aggregate in an acidic tumor microenvironment and react with hydrogen peroxide to produce reactive oxygen species for specific chemodynamic therapy. However, they can degrade rapidly under physiological conditions without causing toxicity. Moreover, self‐adaptively enhanced photothermal conversion enables tumor‐targeting photothermal therapy while enhancing chemodynamic therapy. Additionally, the Mo5+‐Mo6+transition enables lipid peroxide accumulation and glutathione depletion, thereby resulting in the deactivation of glutathione peroxidase 4 protein and ferroptosis through Western blot analysis, confocal laser scanning microscopy observation, and mRNA transcriptome analysis. In addition to its robustness against osteosarcoma, the constructed scaffolds can stimulate rat bone mesenchymal stem cell differentiation and proliferation as well as promote osteogenesis in bone defects. Therefore, this multifunctional scaffold not only validates the subnanomedicine concept but also provides a promising clinical strategy for bone tissue engineering.

5,10,15,20-Tetrakis(pentafluorophenyl)porphyrin as a Functional Platform for Peptide Stapling and Multicyclisation.

Polyfluorinated aromatic reagents readily react with thiolates via nucleophilic aromatic substitution (SN Ar) and provide excellent scaffolds for peptide cyclisation. Here we report a robust and versatile platform for peptide stapling and multicyclisation templated by 5,10,15,20-tetrakis(pentafluorophenyl)porphyrin, opening the door to the next generation of functional scaffolds for 3D peptide architectures. We demonstrate that stapling and multicyclisation occurs with a range of non-protected peptides under peptide-compatible conditions, exhibiting chemoselectivity and wide-applicability. Peptides containing two cysteine residues are readily stapled, and the remaining perfluoroaryl groups permit the introduction of a second peptide in a modular fashion to access bicyclic peptides. Similarly, peptides with more than two cysteine residues can afford multicyclic products containing up to three peptide 'loops'. Finally, we demonstrate that a porphyrin-templated stapled peptide containing the Skin Penetrating and Cell Entering (SPACE) peptide affords a skin cell penetrating conjugate with intrinsic fluorescence.

3D-printed scaffolds with 2D hetero-nanostructures and immunomodulatory cytokines provide pro-healing microenvironment for enhanced bone regeneration

Three-dimensional (3D) printing technology is driving forward the progresses of various engineering fields, including tissue engineering. However, the pristine 3D-printed scaffolds usually lack robust functions in stimulating desired activity for varied regeneration applications. In this study, we combined the two-dimensional (2D) hetero-nanostructures and immuno-regulative interleukin-4 (IL-4) cytokines for the functionalization of 3D-printed scaffolds to achieve a pro-healing immuno-microenvironment for optimized bone injury repair. The 2D hetero-nanostructure consists of graphene oxide (GO) layers, for improved cell adhesion, and black phosphorous (BP) nanosheets, for the continuous release of phosphate ions to stimulate cell growth and osteogenesis. In addition, the 2D hetero-nanolayers facilitated the adsorption of large content of immuno-regulative IL-4 cytokines, which modulated the polarization of macrophages into M2 phenotype. After in vivo implantation in rat, the immuno-functioned 3D-scaffolds achieved in vivo osteo-immunomodulation by building a pro-healing immunological microenvironment for better angiogenesis and osteogenesis in the defect area and thus facilitated bone regeneration. These results demonstrated that the immuno-functionalization of 3D-scaffolds with 2D hetero-nanostructures with secondary loading of immuno-regulative cytokines is an encouraging strategy for improving bone regeneration.

Programmable Melt Electrowriting to Engineer Soft Connective Tissues with Prescribed, Biomimetic, Biaxial Mechanical Properties

AbstractAppropriate load‐bearing function of soft connective tissues is provided by their nonlinear and often anisotropic mechanics. Recapitulating such complex mechanical behavior in tissue‐engineered structures is particularly crucial, as deviation from native tissue mechanics can trigger pathological biomechanical pathways, causing adverse tissue remodeling and dysfunction. Here, a novel method combining computational modeling, melt electrowriting (MEW), and design of experiments (DOE) is reported to generate scaffolds composed of sinusoidal fibers with prescribed biaxial mechanical properties, recapitulating the distinct nonlinear, anisotropic stress–strain behavior of three model tissues: adult aortic valve, pediatric pulmonary valve, and pediatric pericardium. Finite element analysis is used to efficiently optimize scaffold architecture over a broad parameter space, representing up to 65 conditions, to define MEW print parameters to achieve polycaprolactone scaffolds with target mechanical properties. Architectural parameters are further optimized experimentally using DOE and regression to account for uncertainties involved in the simulation, yielding functional scaffolds with accurate, prescribed mechanics. The prescribed architecture also primarily governs the mechanics of hybrid structures generated by casting cell‐laden fibrin hydrogel within the scaffolds. This high‐fidelity approach recapitulates biaxial mechanical properties over a broad range of mechanical nonlinearity and anisotropy and is generalizable for programmed biofabrication in a variety of tissue engineering applications.

Poly(ADP-Ribose) Polymerase-1 Lacking Enzymatic Activity Is Not Compatible with Mouse Development.

Poly(ADP-ribose) polymerase-1 (PARP1) binds DNA lesions to catalyse poly(ADP-ribosyl)ation (PARylation) using NAD+ as a substrate. PARP1 plays multiple roles in cellular activities, including DNA repair, transcription, cell death, and chromatin remodelling. However, whether these functions are governed by the enzymatic activity or scaffolding function of PARP1 remains elusive. In this study, we inactivated in mice the enzymatic activity of PARP1 by truncating its C-terminus that is essential for ART catalysis (PARP1ΔC/ΔC, designated as PARP1-ΔC). The mutation caused embryonic lethality between embryonic day E8.5 and E13.5, in stark contrast to PARP1 complete knockout (PARP1-/-) mice, which are viable. Embryonic stem (ES) cell lines can be derived from PARP1ΔC/ΔC blastocysts, and these mutant ES cells can differentiate into all three germ layers, yet, with a high degree of cystic structures, indicating defects in epithelial cells. Intriguingly, PARP1-ΔC protein is expressed at very low levels compared to its full-length counterpart, suggesting a selective advantage for cell survival. Noticeably, PARP2 is particularly elevated and permanently present at the chromatin in PARP1-ΔC cells, indicating an engagement of PARP2 by non-enzymatic PARP1 protein at the chromatin. Surprisingly, the introduction of PARP1-ΔC mutation in adult mice did not impair their viability; yet, these mutant mice are hypersensitive to alkylating agents, similar to PARP1-/- mutant mice. Our study demonstrates that the catalytically inactive mutant of PARP1 causes the developmental block, plausibly involving PARP2 trapping.

Development of a highly potent and selective degrader of LRRK2

The discovery of disease-modifying therapies for Parkinson’s Disease (PD) represents a critical need in neurodegenerative medicine. Genetic mutations in leucine-rich repeat kinase 2 (LRRK2) are risk factors for the development of PD, and some of these mutations have been linked to increased LRRK2 kinase activity and neuronal toxicity in cellular and animal models. Furthermore, LRRK2 function as a scaffolding protein in several pathways has been implicated as a plausible mechanism underlying neurodegeneration caused by LRRK2 mutations. Given that both the kinase activity and scaffolding function of LRRK2 have been linked to neurodegeneration, we developed proteolysis-targeting chimeras (PROTACs) targeting LRRK2. The degrader molecule JH-XII-03-02 (6) displayed high potency and remarkable selectivity for LRKK2 when assessed in a of 468 panel kinases and serves the dual purpose of eliminating both the kinase activity as well as the scaffolding function of LRRK2.

Research progress of biomaterials and innovative technologies in urinary tissue engineering.

Substantial interests have been attracted to multiple bioactive and biomimetic biomaterials in recent decades because of their ability in presenting a structural and functional reconstruction of urinary tissues. Some innovative technologies have also been surging in urinary tissue engineering and urological regeneration by providing insights into the physiological behavior of the urinary system. As such, the hierarchical structure and tissue function of the bladder, urethra, and ureter can be reproduced similarly to the native urinary tissues. This review aims to summarize recent advances in functional biomaterials and biomimetic technologies toward urological reconstruction. Various nanofirous biomaterials derived from decellularized natural tissues, synthetic biopolymers, and hybrid scaffolds were developed with desired microstructure, surface chemistry, and mechanical properties. Some growth factors, drugs, as well as inorganic nanomaterials were also utilized to enhance the biological activity and functionality of scaffolds. Notably, it is emphasized that advanced approaches, such as 3D (bio) printing and organoids, have also been developed to facilitate structural and functional regeneration of the urological system. So in this review, we discussed the fabrication strategies, physiochemical properties, and biofunctional modification of regenerative biomaterials and their potential clinical application of fast-evolving technologies. In addition, future prospective and commercial products are further proposed and discussed.

Flexible Conductive Decellularized Fish Skin Matrix as a Functional Scaffold for Myocardial Infarction Repair.

Engineering cardiac patches are proven to be effective in myocardial infarction (MI) repair, but it is still a tricky problem in tissue engineering to construct a scaffold with good biocompatibility, suitable mechanical properties, and solid structure. Herein, decellularized fish skin matrix is utilized with good biocompatibility to prepare a flexible conductive cardiac patch through polymerization of polydopamine (PDA) and polypyrrole (PPy). Compared with single modification, the double modification strategy facilitated the efficiency of pyrrole polymerization, so that the patch conductivity is improved. According to the results of experiments in vivo and in vitro, the scaffold can promote the maturation and functionalization of cardiomyocytes (CMs). It can also reduce the inflammatory response, increase local microcirculation, and reconstruct the conductive microenvironment in infarcted myocardia, thus improving the cardiac function of MI rats. In addition, the excellent flexibility of the scaffold, which enables it to be implanted in vivo through "folding-delivering-re-stretehing" pathway, provides the possibility of microoperation under endoscope, which avoids the secondary damage to myocardium by traditional thoracotomy for implantation surgery. This article is protected by copyright. All rights reserved.

3D collagen porous scaffold carrying PLGA-PTX/SDF-1α recruits and promotes neural stem cell differentiation for spinal cord injury repair

Spinal Cord Injury (SCI), one of the major factors of disability, can cause irreversible motor and sensory impairment. There are no effective therapeutic drugs and technologies available in domestic or foreign countries currently. Neural stem cells (NSCs), with the potential for multidirectional differentiation, are a potential treatment for SCI. However, it has been demonstrated that NSCs primarily differentiated into astrocytes rather than neurons due to the inflammatory microenvironment, and the current challenge remains to direct the differentiation of NSCs into neurons in the lesion site. It was reported that the microtubule-stabilizing agent paclitaxel (PTX) was able to promote the differentiation of NSCs into neurons rather than astrocytes after SCI. SDF-1α can recruit NSCs and thus guide the migration of stem cells. In this study, we developed a functional collagen scaffold by loading SDF-1α and nanoparticle-encapsulated PLGA-PTX into a 3D collagen porous scaffold, allowing for slow release of PTX. When the functional scaffolds were implanted into the injury site, it provided a neural regeneration conduit channel for the migration of NSCs and neuronal differentiation. Neural regeneration promoted the recovery of motor function and reduced glial scar formation after SCI. In conclusion, a 3D collagen porous scaffold combined with PLGA-PTX and SDF-1α is a promising therapeutic strategy for SCI repair.

HDAC3 and HDAC8 PROTAC dual degrader reveals roles of histone acetylation in gene regulation

HDAC3 and HDAC8 have critical biological functions and represent highly sought-after therapeutic targets. Because histone deacetylases (HDACs) have a very conserved catalytic domain, developing isozyme-selective inhibitors remains challenging. HDAC3/8 also have deacetylase-independent activity, which cannot be blocked by conventional enzymatic inhibitors. Proteolysis-targeting chimeras (PROTACs) can selectively degrade a target enzyme, abolishing both enzymatic and scaffolding function. Here, we report a novel HDAC3/8 dual degrader YX968 that induces highly potent, rapid, and selective degradation of both HDAC3/8 without triggering pan-HDAC inhibitory effects. Unbiased quantitative proteomic experiments confirmed its high selectivity. HDAC3/8 degradation by YX968 does not induce histone hyperacetylation and broad transcriptomic perturbation. Thus, histone hyperacetylation may be a major factor for altering transcription. YX968 promotes apoptosis and kills cancer cells with a high potency invitro. YX968 thus represents a new probe for dissecting the complex biological functions of HDAC3/8.