Full-scale Wastewater Treatment Plant Research Articles

Intelligent dosing of sodium hypochlorite in municipal wastewater treatment plants: Experimental and modeling studies

Sodium hypochlorite (NaClO), a disinfectant extensively employed in municipal wastewater treatment plants (WWTPs), is frequently overdosed to ensure qualified effluent quality consistently. In light of the escalated disinfectant expenses and detrimental environmental impacts, it is critical to have a precise control model in place to enable intelligent dosing of NaClO. The lack of real-time disinfection evaluation indicators presents difficulties in precisely and swiftly regulating the dosage. Herein, the CT value (the product of residual chlorine concentration and contact time) was initially determined experimentally as a metric for assessing disinfection in municipal WWTPs. Fecal coliform (FC) concentrations become less than 1.0 × 103 MPN/L when the effluent CT value is regulated at 0.20 mg·min/L (calculated as Cl2). In addition, a model employing long short-term memory (LSTM) was developed to predict the dosage, utilizing simplified and suitable parameters such as COD, NH3-N concentration, flow rate, and historical dosage of NaClO as input factors, which demonstrated satisfactory performance (R2 = 0.948). Notably, dosage adjustments were made concurrently in response to CT value feedback. The intelligent dosing model under simultaneous feedforward and feedback control was applied at a full-scale WWTP for nearly two months, considerably reducing disinfectant consumption and meeting the discharge standard of FC.

Dynamics of antimicrobial resistance and susceptibility profile in full-scale hospital wastewater treatment plants.

Drug resistance has become a matter of great concern, with many bacteria now resist multiple antibiotics. This study depicts the occurrence of antibiotic-resistant bacteria (ARB) and resistance patterns in five full-scale hospital wastewater treatment plants (WWTPs). Samples of raw influent wastewater, as well as pre- and post-disinfected effluents, were monitored for targeted ARB and resistance genes in September 2022 and February 2023. Shifts in resistance profiles of Escherichia coli, Pseudomonas aeruginosa, and Acinetobacter baumannii antimicrobial-resistant indicators in the treated effluent compared to that in the raw wastewater were also worked out. Ceftazidime (6.78 × 105 CFU/mL) and cefotaxime (6.14 × 105 CFU/mL) resistant species showed the highest concentrations followed by ciprofloxacin (6.29 × 104 CFU/mL), and gentamicin (4.88 × 104 CFU/mL), in raw influent respectively. WWTP-D employing a combination of biological treatment and coagulation/clarification for wastewater decontamination showed promising results for reducing ARB emissions from wastewater. Relationships between treated effluent quality parameters and ARB loadings showed that high BOD5 and nitrate levels were possibly contributing to the persistence and/or selection of ARBs in WWTPs. Furthermore, antimicrobial susceptibility tests of targeted species revealed dynamic shifts in resistance profiles through treatment processes, highlighting the potential for ARB and ARGs in hospital wastewater to persist or amplify during treatment.

Biological treatment of N-methylpyrrolidone, cyclopentanone, and diethylene glycol monobutyl ether distilled residues and their effects on nitrogen removal in a full-scale wastewater treatment plant

Manufacturing processes in semiconductor and photonics industries involve the use of a significant amount of organic solvents. Recycle and reuse of these solvents produce distillate residues and require treatment before being discharged. This study aimed to evaluate the performance of the biological treatment system in a full-scale wastewater treatment plant that treats wastewater containing distillate residues from the recycling of electronic chemicals. Batch experiments were conducted to investigate the optimal operational conditions for the full-scale wastewater treatment plant. To achieve good nitrogen removal efficiency with effluent ammonia and nitrate concentrations below 20 mg N/L and 50 mg N/L, respectively, it was suggested to control the ammonia concentration and pH of the influent below 500 mg N/L and 8.0, respectively. In addition, the biodegradability of N-methylpyrrolidone, diethylene glycol monobutyl ether, and cyclopentanone distillate residues from the electronic chemicals manufacturing process were evaluated under aerobic, anoxic, and anaerobic conditions. N-methylpyrrolidone and cyclopentanone distillate residues were suggested to be treated under anoxic condition. However, substrate inhibition occurred when using cyclopentanone distillate residue as a carbon source with chemical oxygen demand (COD) levels higher than 866 mg/L and nitrate levels higher than 415 mg N/L. Under aerobic condition, the COD from both N-methylpyrrolidone and cyclopentanone distillate residues could be easily degraded. Nevertheless, a negative effect on nitrification was observed, with a prolonged lag time for ammonia oxidation as the initial COD concentration increased. The specific ammonia oxidation rate and nitrate production rate decreased under high COD concentration contributed by N-methylpyrrolidone and cyclopentanone distillate residues. Furthermore, the biodegradability of diethylene glycol monobutyl ether distillate residue was found to be low under aerobic, anoxic, and anaerobic conditions. With respect to the abundance of nitrogen removal microorganisms in the wastewater treatment plant, results showed that Comammox may have an advantage over ammonia oxidizing bacteria under high pH conditions. In addition, Comammox may have higher resistance to environmental changes. Dominance of Comammox over ammonia oxidizing bacteria under high ammonia condition was first reported in this study.

HPB-Chip: An accurate high-throughput qPCR-based tool for rapidly profiling waterborne human pathogenic bacteria in the environment

Waterborne pathogens are threatening public health globally, but profiling multiple human pathogenic bacteria (HPBs) in various polluted environments is still a challenge due to the absence of rapid, high-throughput and accurate quantification tools. This work developed a novel chip, termed the HPB-Chip, based on high-throughput quantitative polymerase chain reactions (HT-qPCR). The HPB-Chip with 33-nL reaction volume could simultaneously complete 10,752 amplification reactions, quantifying 27 HPBs in up to 192 samples with two technical replicates (including those for generating standard curves). Specific positive bands of target genes across different species and single peak melting curves demonstrated high specificity of the HPB-Chip. The mixed plasmid serial dilution test validated its high sensitivity with the limit of quantification (LoD) of averaged 82 copies per reaction for 25 target genes. PCR amplification efficiencies and R2 coefficients of standard curves of the HPB-Chip averaged 101 % and 0.996, respectively. Moreover, a strong positive correlation (Pearson’ r: 0.961–0.994, P < 0.001) of HPB concentrations (log10 copies/L) between HPB-Chip and conventional qPCR demonstrated high accuracy of the HPB-Chip. Subsequently, the HPB-Chip has been successfully applied to absolutely quantify 27 HPBs in municipal and hospital wastewater treatment plants (WWTPs) after PMA treatment. A total of 17 HPBs were detected in the 6 full-scale WWTPs, with an additional 19 in the hospital WWTP. Remarkably, Acinetobacter baumannii, Legionella pneumophila, and Arcobacter butzler were present in the final effluent of each municipal WWTP. Overall, the HPB-Chip is an efficient and accurate high-throughput quantification tool to comprehensively and rapidly quantify 27 HPBs in the environment.

Complete long-term monitoring of greenhouse gas emissions from a full-scale industrial wastewater treatment plant with different cover configurations

The greenhouse gas (GHG) emissions from wastewater treatment plants (WWTPs), consisting mainly of methane (CH4) and nitrous oxide (N2O), have been constantly increasing and become a non-negligible contributor towards carbon neutrality. The precise evaluation of plant-specific GHG emissions, however, remains challenging. The current assessment approach is based on the product of influent load and emission factor (EF), of which the latter is quite often a single value with huge uncertainty. In particular, the latest default Tier 1 value of N2O EF, 0.016 ± 0.012 kgN2O–N kgTN−1, is estimated based on the measurement of 30 municipal WWTPs only, without involving any industrial wastewater. Therefore, to resolve the pattern of GHG emissions from industrial WWTPs, this work conducted a 14-month monitoring campaign covering all the process units at a full-scale industrial WWTP in Shanghai, China. The total CH4 and N2O emissions from the whole plant were, on average, 447.7 ± 224.5 kgCO2-eq d−1 and 1605.3 ± 2491.0 kgCO2-eq d−1, respectively, exhibiting a 5.2- or 3.9-times more significant deviation than the influent loads of chemical oxygen demand (COD) or total nitrogen (TN). The resulting EFs, 0.00072 kgCH4 kgCOD−1 and 0.00211 kgN2O–N kgTN−1, were just 0.36% of the IPCC recommended value for CH4, and 13.2% for N2O. Besides, the parallel anoxic-oxic (A/O) lines of this industrial WWTP were covered in two configurations, allowing the comparison of GHG emissions from different odor control setup. Unit-specific analysis showed that the replacement of enclosed A/open O with enclosed A/O reduced the CH4 EF by three times, from 0.00159 to 0.00051 kgCH4 kgCOD−1, and dramatically decreased the N2O EF by an order of magnitude, from 0.00376 to 0.00032 kgN2O–N kgTN−1, which was among the lowest of all full-scale WWTPs.

Modelling competitive adsorption of organic micropollutants onto powdered activated carbon in continuous stirred tank reactors for advanced wastewater treatment

This work investigates the validation and application of a competitive model approach for full-scale wastewater treatment plants (WWTP) with external recirculation of partially loaded powdered activated carbon (PAC) for removal of organic micropollutants (OMP). It is based on the ideal adsorbed solution theory (IAST) for multisolute mixtures combined with calibration of fictive organic components and correction of single-solute model parameters for OMP by use of the tracer model (TRM). Adsorption kinetics are represented by a pseudo first order reaction (PFO) and compared to mass transfer calculated with the homogenous surface diffusion model (HSDM). Model validation with operational data from two different WWTPs showed a strong dependency of model results on the batch sample quality used for model calibration. In contrast, the kinetic approach is of less importance for predicting full-scale OMP removal with long PAC sludge retention times. Further model application demonstrated that external PAC recirculation significantly improves the OMP removal with regard to both adsorption capacity and compensation of competitive effects of Dissolved Organic Carbon (DOC).

Relating the carbon sources to denitrifying community in full-scale wastewater treatment plants

Carbon source is a key factor determining the denitrifying effectiveness and efficiency in wastewater treatment plants (WWTPs). Whereas, the relationships between diverse and distinct denitrifying communities and their favorable carbon sources in full-scale WWTPs were not well-understood. This study performed a systematic analysis of the relationships between the denitrifying community and carbon sources by using 15 organic compounds from four categories and activated sludge from 8 full-scale WWTPs. Results showed that, diverse denitrifying bacteria were detected with distinct relative abundances in 8 WWTPs, such as Haliangium (1.98–4.08%), Dechloromonas (2.00–3.01%), Thauera (0.16–1.06%), Zoogloea (0.09–0.43%), and Rhodoferax (0.002–0.104%). Overall, acetate resulted in the highest denitrifying activities (1.21–4.62 mg/L/h/gMLSS), followed by other organic acids (propionate, butyrate and lactate, etc.). Detectable dissimilatory nitrate reduction to ammonium (DNRA) was observed for all 15 carbon sources. Methanol and glycerol resulted in the highest DRNA. Acetate, butyrate, and lactate resulted in the lowest DNRA. Redundancy analysis and 16S cDNA amplicon sequencing suggested that carbon sources within the same category tended to correlate to similar denitrifiers. Methanol and ethanol were primarily correlated to Haliangium. Glycerol and amino acids (glutamate and aspartate) were correlated to Inhella and Sphaerotilus. Acetate, propionate, and butyrate were positively correlated to a wide range of denitrifiers, explaining the high efficiency of these carbon sources. Additionally, even within the same genus, different amplicon sequence variants (ASVs) performed distinctly in terms of carbon source preference and denitrifying capabilities. These findings are expected to benefit carbon source formulation and selection in WWTPs.

Characteristics and key driving factors of nitrous oxide emissions from a full-scale landfill leachate treatment system

The characteristics of N2O emission from a full-scale landfill leachate treatment system were investigated by in-situ monitoring over 1.4 years and driving factors responsible for these emissions were identified by statistical analysis of multidimensional environmental variables. The results showed that the maximum N2O emission flux of 2.21 × 107 mg N·h−1 occurred in the nitrification tanks, where 98.5 % of the total N2O was released, with only 1.5 % of the total N2O emitted from the denitrification tanks. Limited oxygen in nitrification tank was responsible for N2O hotspot. The N2O emissions from the parallel lines A and B (both comprising the primary biochemical system) accounted for 52.6 % and 46.6 %, respectively, while the secondary biochemical system contributed only 0.8 % to the total emissions. Higher nitrite concentration in line A and lower nitrogen loading in the secondary biochemical system caused these discrepancies. We found that during the steady state of leachate treatment, intensive N2O emissions of 253.4–1270.5 kg N·d−1 were measured. The corresponding N2O emission factor (EF) ranged from 8.86 to 49.6 %, much higher than those of municipal wastewater treatment. But N2O EF was inconceivably as low as 0.42 % averagely after system maintenance. Influent with low salinity was the key reason, followed by the high MLSS and varying microbial community after maintenance. The dominant genus shifted from Lentimicrobium and Thauera to Norank-F-Anaerolineaceae and Unclassified-F-Rhodocyclaceae. This study underscores the significance of landfill leachate treatment in urban nitrogen management and provides valuable insights into the characteristics and driving factors of N2O emissions from such systems. The findings offer important references for greenhouse gas emission inventories and strategies for N2O control in full-scale wastewater treatment plants.

A Study of the System Performance and the Microbial Community Composition of Chemical Wastewater in an AO-MBBR Treatment Process

To improve the nitrogen removal and reduce the chemical oxygen demand (COD) of a full-scale wastewater treatment plant, two sequential batch reactor devices were used to treat chemical wastewater with biocarriers in low carbon-to-nitrogen (C/N) ratio conditions. The results showed that the addition of biocarriers to the anoxic tank reduced the average concentration of COD in the effluent from 98.1 mg/L to 80.7 mg/L and increased total nitrogen (TN) removal by 9.4%. Metagenomic sequencing was performed to study the composition and function of microbial community samples taken from anoxic sludge and anoxic-carrier biofilms in this wastewater treatment plant. The results showed that Proteobacteria and Actinobacteria were the dominant phyla in the two samples, ensuring their capability for organic matter removal. The anoxic-carrier biofilms were mainly enriched with denitrifying bacteria such as Thauera (10.7%) and Comammonas (2.2%) and the anammox bacteria Candidatus Kuenenia (0.03%). Meanwhile, the nitrogen metabolism pathway was elaborated and the abundance of the functional genes involved in the nitrogen metabolism pathway was quantified. In addition, results from qPCR showed increased copy numbers of denitrification and anammox genes in the anoxic-carrier biofilms compared to those in the anoxic sludge, further confirming the enrichment of functional bacteria.

EDAR 4.0: Machine Learning and Visual Analytics for Wastewater Management

Wastewater treatment plant (WWTP) operations manage massive amounts of data that can be gathered with new Industry 4.0 technologies such as the Internet of Things and Big Data. These data are critical to allow the wastewater treatment industry to improve its operation, control, and maintenance. However, the data available need to be improved and enriched, partly due to their high dimensionality and low reliability, and the lack of appropriate data analysis and processing tools for such systems. This paper presents a visual analytics-based platform for WWTP that allows users to identify relationships among data through data inspection. The results show that the tool developed and implemented for a full-scale WWTP allows operators to construct machine learning (ML) models for water quality and other water treatment process variables. Consequently, analyzing and optimizing plant operation scenarios can enhance key variables, including energy, reagent consumption, and water quality. This improvement facilitates the development of a more sustainable WWTP, contributing to a beneficial environmental impact. Domain experts validated the variables influencing the created ML models and proved their appropriateness.

Micropollutant biotransformation under different redox conditions in PhoRedox conventional activated sludge systems

The ecotoxicological safety of the water bodies relies on the reduction of micropollutant emissions from wastewater treatment plants (WWTP). The ecotoxicological safety of the water bodies relies on the reduction of micropollutant emissions from wastewater treatment plants (WWTP). Quantification of micropollutant removal at full-scale WWTP is scarce. To our knowledge, the anaerobic conversion rates determined at conventional activated sludge processes are, so far, scarcely available in the literature for most of the micropollutants. In this research, we quantified the biotransformation rate constants and the removal efficiencies of 16 micropollutants (4,5-methylbenzotriazole, azithromycin, benzotriazole, candesartan, carbamazepine, clarithromycin, diclofenac, gabapentin, hydrochlorothiazide, irbesartan, metoprolol, propranolol, sotalol, sulfamethoxazole, trimethoprim, and venlafaxine), under aerobic, anoxic, and anaerobic redox conditions; using as inoculum wastewater and biomass from a full-scale conventional activated sludge (CAS) system in the Netherlands. Clarithromycin was the compound that exhibited the highest aerobic (76%) and anaerobic (78%) removal efficiencies, while gabapentin showed the highest removal under anoxic conditions (91%). A preference for cometabolic biotransformation of the targeted micropollutants was observed. The highest biotransformation rate constants obtained were: at aerobic conditions clarithromycin with 1.46 L.gSS−1.d−1; at anoxic conditions, gabapentin with 2.36 L.gSS−1.d−1; and at anaerobic redox conditions clarithromycin with 1.87 L.gSS−1.d−1. The obtained results of biotransformation rates will allow further modelling of micropollutant removal in CAS systems, under various redox conditions. These biotransformation rates can be added to extended ASM models to predict effluent concentration and optimize targeted advanced oxidation processes allowing savings in the operational costs and increasing the process viability.

Metabolites are overlooked in environmental risk assessments and monitoring of pharmaceuticals: The case study of pantoprazole

The proton-pump inhibitor pantoprazole (PPZ) is one of the most consumed pharmaceuticals worldwide. Despite its high usage, reported PPZ concentrations in environmental water samples are comparatively low, which can be explained by the extensive metabolism of PPZ in the human body. Since most previous studies did not consider human PPZ metabolites it can be assumed that the current environmental exposure associated with the application of PPZ is substantially underestimated. In our study, 4′-O-demethyl-PPZ sulfide (M1) was identified as the predominant PPZ metabolite by analyzing urine of a PPZ consumer as well as the influent and effluent of a wastewater treatment plant (WWTP) using liquid chromatography coupled to high resolution mass spectrometry (LC-HRMS). M1 was found to be ubiquitously present in WWTP effluents (max. concentration: 3 000 ng/L) and surface waters in Germany. On average, the surface water concentrations of M1 were approximately 30 times higher than those of the parent compound PPZ. Laboratory scale experiments demonstrated that activated carbon can considerably adsorb M1 und thus improve its removal during wastewater and drinking water treatment. Laboratory ozonation experiments showed a fast oxidation of M1, accompanied by the formation of several ozonation products. Certain ozonation products (identities confirmed via synthesized reference standards) were also detected in water samples collected after ozonation in a full-scale WWTP. Overall lower signal intensities were observed in the effluents of a sand filter and biologically active granular activated carbon filter, suggesting that the compounds were significantly removed during these post-ozonation treatment stages.

Efficient removal of size-fractionated antibiotic resistance genes (ARGs) in WWTPs secondary effluent by vacuum ultraviolet (VUV) activated potassium peroxymonosulfate (PMS)

Antibiotic resistance genes (ARGs) and mobile genetic elements (MGEs) in secondary effluent from wastewater treatment plants (WWTPs) have a size-fractionated character and conventional processes have difficulties in removing ARGs and MGEs. Therefore, this study aimed to explore the removal efficiency, removal mechanism and regeneration potential of size-fractionated ARGs and MGEs by vacuum ultraviolet (VUV)-activated peroxymonosulfate (PMS) and ascertain their potential hosts in secondary effluent. The proportion of particle-associated (PA)-ARGs and PA-MGEs was 85.07 %, followed by free-living (FL) fraction (14.91 %) and cell-free (CF) fraction (0.02 %). More than 95.00 %∼99.99 % of ARGs and MGEs in PA- and CF- fractions were removed by VUV/PMS, but the average removal efficiency of FL-ARGs and FL-MGEs was 66.15 %. Compared to the regeneration potential of PA- and CF-ARGs and MGEs (0.02 < C/C0 < 5.27), the regeneration occurred mainly in FL-ARGs and FL-MGEs (0.08 < C/C0 < 24.06). ·OH was the dominant radical (16.810 × 10-6 mol/L) in VUV/PMS for the removal of size-fractionated ARGs and MGEs from the secondary effluent, while SO4-· (4.478 × 10-6 mol/L) played a supporting role in the system based on the quenching experiment, electron paramagnetic resonance spectrometer and probe experiments. Based on full-scale classification, conditionally rare or abundant taxa (CRAT) were the core potential hosts in PA-, FL- and CF- fractions, while rare taxa (RT) and conditionally rare taxa (CRT) potential hosts were more diverse in the three fractions. This study suggests that VUV/PMS can effectively remove size-fractionated ARGs and MGEs from secondary effluent and thereby obviously reduce their dissemination risk to receiving water bodies, providing technical support for the engineering application of VUV/PMS in full-scale WWTPs.

MBR and GAC filtration followed by UV disinfection – implications for wastewater reuse at full scale

ABSTRACT Influences of upstream wastewater treatment on the process combination of granular activated carbon (GAC) and ultraviolet (UV) disinfection were studied and the implications of this for wastewater reuse were assessed. GAC is an efficient chemical barrier but contributes little to the removal of indicator bacteria, and generally increases total bacteria concentrations, necessitating disinfection with UV radiation, for example, to ensure the safe reuse of wastewater. The efficiency of UV disinfection is impacted by factors such as particle concentration and UV absorbance of the water and is thus affected by upstream treatment processes. A full-scale wastewater treatment plant with a membrane bioreactor (MBR) followed by GAC filtration was compared to a treatment plant with a conventional activated sludge process and sand filtration, followed by GAC filtration. The removal of indicator bacteria was higher by the GAC filter that was preceded by an MBR. A UV fluence of 400 J/m2 was sufficient to reach irrigation water quality for both process combinations and to meet the criteria for microbial drinking water quality in the MBR + GAC effluent. One sample was selected for chemical analysis, comprising approximately 100 parameters, demonstrating that the MBR + GAC + UV (400 J/m2) effluent met all drinking water criteria except for nitrate levels.

Temperature-phased anaerobic sludge digestion effectively removes antibiotic resistance genes in a full-scale wastewater treatment plant

Sludge is a major by-product and the final reservoir of antibiotic resistance genes (ARGs) in wastewater treatment plants (WWTPs). Temperature-phased anaerobic digestion (TPAD), consisting of thermophilic anaerobic digestion (AD) (55 °C) and mesophilic AD processes (37 °C), has been implemented in WWTPs for sludge reduction while improving the biomethane production. However, the impact of TPAD on the ARGs' fate is still undiscovered in lab-scale experiments and full-scale WWTPs. This study, for the first time, investigated the fate of ARGs during the TPAD process across three seasons in a full-size WWTP. Ten typical ARGs and one integrase gene of class 1 integron (intI1) involving ARGs horizontal gene transfer were examined in sludge before and after each step of the TPAD process. TPAD reduced aac(6′)-Ib-cr, blaTEM, drfA1, sul1, sul2, ermb, mefA, tetA, tetB and tetX by 87.3–100.0 %. TPAD reduced the overall average absolute abundance of targeted ARGs and intI1 by 92.39 % and 92.50 %, respectively. The abundance of targeted ARGs in sludge was higher in winter than in summer and autumn before and after TPAD. During the TPAD processes, thermophilic AD played a major role in the removal of ARGs, contributing to >60 % removal of ARGs, while the subsequent mesophilic AD contributed to a further 31 % removal of ARGs. The microbial community analysis revealed that thermophilic AD reduced the absolute abundance of ARGs hosts, antibiotic resistant bacteria. In addition, thermophilic AD reduced the abundance of the intI1, while the intI1 did not reproduce during the mesophilic AD, also contributing to a decline in the absolute abundance of ARGs in TPAD. This study demonstrates that TPAD can effectively reduce the abundance of ARGs in sludge, which will suppress the transmission of ARGs from sludge into the natural environment and deliver environmental and health benefits to our society.

Accounting for the microbial assembly of each process in wastewater treatment plants (WWTPs): study of four WWTPs receiving similar influent streams.

We evaluated a unique model in which four full-scale wastewater treatment plants (WWTPs) with the same treatment schematic and fed with similar influent wastewater were tracked over an 8-month period to determine whether the community assembly would differ in the activated sludge (AS) and sand filtration (SF) stages. For each WWTP, AS and SF achieved an average of 1-log10 (90%) and <0.02-log10 (5%) reduction of total cells, respectively. Despite the removal of cells, both AS and SF had a higher alpha and beta diversity compared to the influent microbial community. Using the Sloan neutral model, it was observed that AS and SF were individually dominated by different assembly processes. Specifically, microorganisms from influent to AS were predominantly determined by the selective niche process for all WWTPs, while the microbial community in the SF was relatively favored by a stochastic, random migration process, except two WWTPs. AS also contributed more to the final effluent microbial community compared with the SF. Given that each WWTP operates the AS independently and that there is a niche selection process driven mainly by the chemical oxygen demand concentration, operational taxonomic units unique to each of the WWTPs were also identified. The findings from this study indicate that each WWTP has its distinct microbial signature and could be used for source-tracking purposes.IMPORTANCEThis study provided a novel concept that microorganisms follow a niche assembly in the activated sludge (AS) tank and that the AS contributed more than the sand filtration process toward the final microbial signature that is unique to each treatment plant. This observation highlights the importance of understanding the microbial community selected by the AS stage, which could contribute toward source-tracking the effluent from different wastewater treatment plants.

Linking conventional activated sludge treatment plant performances for micropollutants removal to environmental risk and SimpleTreat model assessment

The attention to the contaminants of emerging concerns or micropollutants is continuously rising, also stimulated by the new initiatives at European level. The present study focuses on the removal of target micropollutants in a conventional activated sludge wastewater treatment plant which is the most common system and considered a source of micropollutants to the environment. The aims were to evaluate the removal efficiency of different stages of the wastewater treatment plant and to conduct the Environmental Risk Assessment on the final effluent. As indicated by the European’s guidelines on Environmental Risk Assessment, the SimpleTreat4.1 model was applied to this purpose: different values of the biodegradation constant, which represents the key factor for modelling, were applied, and the effects on the quality of prediction were evaluated. The evaluations were carried out thorough 3-year monitoring activity in a full-scale wastewater treatment plant on 10 micropollutants belonging to the classes of illicit drugs, pharmaceuticals and psychoactive. The model was found statistically not satisfactory for most of the investigated micropollutants. A better prediction was obtained when the biodegradation constant was calculated based on the full-scale data. Nonetheless, the results obtained in terms of risk were considered acceptable and comparable among each other.Graphical abstract

Performance of full-scale rural wastewater treatment plants in the reduction of antibiotic-resistant bacteria and antibiotic resistance genes from small-city effluents

The main objective of this study was to evaluate the performance of full-scale rural wastewater treatment plants (WWTPs) in the reduction of antibiotic-resistant bacteria (ARB) and antibiotic resistance genes (ARGs) from small-city effluents. Twenty full-scale WWTPs in rural Chile with different biological treatment technologies (vermifiltration (VF), activated sludge (AS) and biodisc (BD)) and disinfection treatments (chlorination (Cl) and UV irradiation (UV)) were monitored and studied in two campaigns: Campaign 1 (20 WWTPs) and Campaign 2 (6 WWTPs). In both campaigns, the rural WWTPs improved the water quality of the effluents very significantly (90%, 70%, and 40% reductions in TU, COD, and NH4+-N, respectively) and reduced ARB and ARG loads by 2–4 log units. All three biological treatments contributed to the final quality of the effluents, especially in terms of microbiological parameters, with statistically indistinguishable efficiencies between them. These results show the importance of rural WWTPs in improving the water quality of urban effluents while reducing microbiological risk and the spread of antibiotic resistance into the environment. The study demonstrates the utility of a non-centralized, self-managed wastewater treatment scheme that can be implemented in many sparsely populated areas around the world.

The effect of aeration mode (intermittent vs. continuous) on nutrient removal and greenhouse gas emissions in the wastewater treatment plant of Corleone (Italy)

The paper reports the results of an experimental study aimed at comparing two configurations of a full-scale wastewater treatment plant (WWTP): conventional activated sludge (CAS) and oxic-settling-anaerobic process (OSA) with intermittent aeration (IA). A comprehensive monitoring campaign was carried out to assess multiple parameters for comparing the two configurations: carbon and nutrient removal, greenhouse gas emissions, respirometric analysis, and sludge production. A holistic approach has been adopted in the study with the novelty of including the carbon footprint (CF) contribution (as direct, indirect and derivative emissions) in comparing the two configurations. Results showed that the OSA-IA configuration performed better in total chemical oxygen demand (TCOD) and ortho-phosphate (PO4-P) removal. CAS performed better for Total Suspended Solids (TSS) removal showing a worsening of settling properties for OSA-IA. The heterotrophic yield coefficient and maximum growth rate decreased, suggesting a shift to sludge reduction metabolism in the OSA-IA configuration. Autotrophic biomass showed a reduced yield coefficient and maximum growth yield due to the negative effects of the sludge holding tank in the OSA-IA configuration on nitrification. The OSA-IA configuration had higher indirect emissions (30.5 % vs 21.3 % in CAS) from additional energy consumption due to additional mixers and sludge recirculation pumps. The CF value was lower for OSA-IA than for CAS configuration (0.36 kgCO2/m3 vs 0.39 kgCO2/m3 in CAS).

Effects of operational parameters on bacterial communities in Hong Kong and global wastewater treatment plants.

Wastewater treatment plants (WWTPs) are an indispensable component of modern cities, as they can remove pollutants in wastewater to prevent anthropogenic activities. Activated sludge (AS) is a fundamental wastewater treatment process and it harbors a highly complex microbial community that forms the main components and contains functional groups. Unveiling "who is there" is a long-term goal of the research on AS microbiology. High-throughput sequencing provides insights into the inventory diversity of microbial communities to an unprecedented level of detail. At present, the analysis of communities in WWTPs usually comes from a specific WWTP and lacks comparisons and verification among different WWTPs. The wide-scale and long-term sampling project and research in this study could help us evaluate the AS community more accurately to find the similarities and different results for different WWTPs in Hong Kong and other regions of the world.