Frequency Electromagnetic Waves Research Articles

The endocannabinoid system is involved in the anxiety-like behavior induced by dual-frequency 2.65/0.8 GHz electromagnetic radiation in mice.

As wireless communication devices gain popularity, concerns about the potential risks of environmental exposure to complex frequency electromagnetic radiation (EMR) on mental health have become a public health issue. Historically, EMR research has predominantly focused on single- frequency electromagnetic waves, neglecting the study of multi-frequency electromagnetic waves, which more accurately represent everyday life. To address these concerns, our study compared the emotional effects of single-frequency and dual-frequency EMR while exploring potential molecular mechanisms and intervention targets. Our results revealed that single-frequency EMR at 2.65 or 0.8 GHz did not induce anxiety-like behavior in mice. However, exposure to dual-frequency EMR at 2.65/0.8 GHz significantly led to anxiety-like behavior in mice. Further analysis of mouse sera revealed substantial increases in corticosterone and corticotrophin releasing hormone levels following exposure to 2.65/0.8 GHz EMR. Transcriptome sequencing indicated a significant decrease in the expression of Cnr1, encoding cannabinoid receptor 1 Type (CB1R), in the cerebral. This finding was consistently verified through western blot analysis, revealing a substantial reduction in CB1R content. Additionally, a significant decrease in the endocannabinoid 2-arachidonoylglycerol was observed in the cerebral cortex. Remarkably, administering the cannabinoid receptor agonist Win55-212-2 significantly alleviated the anxiety-like behavior, and the cannabinoid receptor antagonist AM251 effectively counteracted the anti-anxiety effects of Win55-212-2. In summary, our research confirmed that dual-frequency EMR is more likely to induce anxiety-like behavior in mice than single-frequency EMR, with implications for the hypothalamic-pituitary-adrenal axis and the endocannabinoid system. Furthermore, our findings suggest that Win55-212-2 may represent a novel avenue for researching and developing anti-EMR drugs.

Electromagnetic absorption properties of FexCoNi magnetic nano particles

The microstructure morphology, static magnetic properties, and electromagnetic absorption characteristics of nano FexCoNi alloy particles prepared by chemical liquid deposition with five different Fe content levels are investigated in this paper. The results show that spherical FexCoNi alloy particles with an average particle size of about 100–200 nm and a face-centered cubic crystal structure were obtained. All five samples exhibited soft magnetic behavior, with the saturation magnetization intensity showing an increasing-then-decreasing trend with increasing Fe content, peaking at 141.8 emu/g for Fe content x = 1.0. The dielectric constants (real and imaginary parts) of the prepared alloy particles exhibit significant differences with respect to the variation of Fe content, while the changes in the real and imaginary parts of the magnetic permeability show less pronounced effects with increasing Fe content. As the electromagnetic wave frequency increases, the real parts of the dielectric constants for all composites show minimal fluctuations, and the real parts of the magnetic permeability exhibit a decreasing trend. Moreover, the imaginary parts of the dielectric constants and magnetic permeability show an increasing followed by a decreasing trend as the frequency rises. The material with Fe content x = 1 demonstrated optimal dielectric loss performance and relatively excellent magnetic loss performance, with a sample thickness of 1.9 mm exhibiting the highest reflection loss (RLmax) of −24.2 dB and an effective absorption bandwidth of 4.48 GHz.

Near-field detection of gate-tunable anisotropic plasmon polaritons in black phosphorus at terahertz frequencies

Polaritons in two-dimensional layered crystals offer an effective solution to confine, enhance and manipulate terahertz (THz) frequency electromagnetic waves at the nanoscale. Recently, strong THz field confinement has been achieved in a graphene-insulator-metal structure, exploiting THz plasmon polaritons (PPs) with strongly reduced wavelength (λp ≈ λ0/66) compared to the photon wavelength λ0. However, graphene PPs propagate isotropically, complicating the directional control of the THz field, which, on the contrary, can be achieved exploiting anisotropic layered crystals, such as orthorhombic black-phosphorus. Here, we detect PPs, at THz frequencies, in hBN-encapsulated black phosphorus field effect transistors through THz near-field photocurrent nanoscopy. The real-space mapping of the thermoelectrical near-field photocurrents reveals deeply sub-wavelength THz PPs (λp ≈ λ0/76), with dispersion tunable by electrostatic control of the carrier density. The in-plane anisotropy of the dielectric response results into anisotropic polariton propagation along the armchair and zigzag crystallographic axes of black-phosphorus. The achieved directional subwavelength light confinement makes this material system a versatile platform for sensing and quantum technology based on nonlinear optics.

The effect of excitation current on radial electromagnetic force wave of tangential magnetizing parallel structure hybrid excitation synchronous motor

To study the influence of the magnitude of the excitation current on the radial electromagnetic force wave of the tangential magnetizing parallel structure hybrid excitation synchronous motor (TMPS-HESM) under different working conditions. Firstly, the basic structure of the motor and the rotor magnetic circuit model is introduced. Secondly, considering the influence of excitation current, the Maxwell stress tensor method is used to analyze the radial electromagnetic force wave of the motor and the source, frequency and order of the radial electromagnetic force wave that has a great influence on the electromagnetic vibration of the motor are qualitatively obtained. Then, the three-dimensional finite element method is used to calculate the variation law of the radial electromagnetic force wave when different excitation currents are applied under no-load and load conditions, revealing that the DC excitation will increase the amplitude of the radial electromagnetic force wave of a specific order. Meanwhile, the influence of load torque variation on the radial electromagnetic force wave is discussed, and it is found that the (2f, 8) and (6f, 24) order electromagnetic force waves are greatly affected by the armature reaction. The work provides a theoretical basis for further suppressing the electromagnetic vibration of this type of hybrid excitation motor.

Viscous dissipation effect on amplitude and oscillating frequency of heat transfer and electromagnetic waves of magnetic driven fluid flow along the horizontal circular cylinder

The significant importance of present research is to remove the extreme temperature along the magnetic driven horizontal circular cylinder. The induced electromagnetic field is applied around the surface of cylinder. The main novelty of current research is to control thermal and magnetic boundary layer in the presence of viscous dissipation and induced electromagnetic field. The dimensional mathematical form is developed with defined boundary conditions. The dimensional equations are transformed into dimensionless equations to generate physical factors. The primitive form is used to reduce dimensionless equations into convenient form for smooth algorithm. The finite difference method with Gaussian elimination technique is applied for numerical results in FORTRAN language tool. The velocity, temperature and electromagnetic field are sketched graphically with asymptotic sequence. The oscillatory shear stress, oscillating heat rate and periodical current density is plotted graphically and numerically. It is found that fluid velocity improves significantly as buoyancy force increases around each position. It is noticed that the increasing oscillations in heat transfer are sketched for maximum choice of Prandtl number. It is found that the maximum oscillations in current density are obtained for each Eckert parameter. It is noticed that the significant distribution in temperature profile is obtained in the presence of viscous dissipation and magnetic field.

Parasitic modulation effect caused by dynamic plasma in low frequency

Abstract-dynamic plasma sheath can severely interfere with the communication of hypersonic vehicles during atmospheric reentry. Theoretical and experimental results show that low-frequency (LF) electromagnetic (EM) waves could penetrate the plasma sheath, building a feasible method to solve the “radio blackout” problem. This paper discovers that the propagation of LF EM waves in plasmas is still influenced by parasitic modulation effects. Compared to microwave frequencies, the impact of parasitic modulation effects on signal modulation patterns is more distinct for LF EM waves. In contrast to the microwave frequency range, where the rotation direction of QPSK signal constellation points changes with the ratio of plasma frequency to electromagnetic wave frequency, in the LF range, the constellation points undergo limited clockwise rotation. This phenomenon can be attributed to the unique magnetic field propagation mechanism of LF EM waves in dynamic plasmas. This paper analyzes the mechanism of this specific parasitic modulation effect and discovers a sinusoidal transformation relationship between amplitude attenuation and phase shift. Meanwhile, the experimental and simulation results proved that the time-varying plasma could cause the parasitic modulation effect of LF EM wave, resulting in a limited clockwise rotation of orthogonal phase-shift keying constellation points, which is consistent with the theoretical analysis.

Power loss model of electromagnetic waves propagation in cell solutions by GHz electrical impedance spectroscopy

The propagation of GHz electromagnetic (EM) waves across cells in cell solutions has been analytically modeled and numerically calculated in order to elucidate the power loss in the boundary between dispersed medium and cell by establishing a theoretical model. Living and dead yeast cells are chosen as objects because of the simple cell structure and ease of observation under optical microscope. Through the model, the average power density of the incident wave S avi , reflected wave S avr , transmitted wave S avt , and ratio of the power loss ψ are calculated and compared to analyze the power loss of EM waves inside living and dead yeast cells by considering the impacts of frequency of EM wave, cell viability, concentration, and component structures of the cell. Results demonstrate decreased S avi, S avr , and S avt with rising frequency, especially noticeable below 100 MHz due to enhanced absorption from cell components. EM waves in living yeast cell solutions exhibit faster attenuation and stronger reflection compared to dead yeast cells, attributed to intact organelles and membranes intensifying absorption and scattering. The increasing cells concentration further attenuates EM waves. This work elucidates propagation and power loss of EM waves in cell solutions and provides an effective computational approach to optimize EM wave based biomedical applications.

Synthesis of nano/micro ternary magnetic particles with different Co content and their electromagnetic absorbing properties

To comprehend the influence of Co element content on the microwave absorption properties of FeCoNi alloy particles, five sets of nano/micro FeCoNi alloy particles with varying Co element contents were fabricated with chemical liquid deposition. The microstructure, static magnetic characteristics, and microwave absorption performance were studied. The results shown that the synthesized FeCoNi alloy particles exhibited spherical morphology and face-centered cubic crystal structure, with the average particle size increasing from 150 nanometers to 500 nanometers as the Co element content rose. All five sets of samples presented soft magnetic properties, with the saturation magnetization fluctuating between 97.1–129.5 emu/g and coercivity ranging from 40.4–280.3 Oe. As the frequency of electromagnetic waves increased, the real part of the complex permittivity of the alloy particles demonstrated minimal variation, while the imaginary part exhibited dielectric loss absorption peaks in the frequency ranges of 10–16 GHz, 10–14 GHz, and 8–10 GHz/13–16 GHz. The imaginary part of the complex permeability initially increased and then decreased with the frequency rose. All the samples exhibited distinct Debye semicircles and polarization relaxation losses within the samples. The sample with Co content of x = 0.8 Fe1Co0.8Ni1 achieved the maximum effective absorption bandwidth 5.36 GHz at thickness of 1.5 mm and the maximum reflection loss |RLmax| 32.5 dB at thickness of 2.2 mm for relatively good impedance matching and excellent combination of magnetic loss and dielectric loss.

Comprehensive performance evaluation based on electromagnetic shielding properties of the weft-knitted fabrics made by stainless steel/cotton blended yarn

Abstract Electromagnetic shielding (EMS) fabric is an effective way to prevent electromagnetic (EM) radiation. However, the research about mechanism analysis of the fabrics’ structure, EM wave (EMW) incident direction, and EMW frequency on the EMS properties of knitted fabrics is discordant at present. Meanwhile, researchers are focused on improving the EMS efficiency of the fabric but rarely discussed the thermal-wet comfort of the fabric. Therefore, in this study a series of weft-knitted fabrics within stainless steel/cotton (30/70) blended yarns were knitted, and the effects of EMW incident direction, stitches, loop lengths, and frequency on EMS effectiveness (EMSE) were analyzed. Meanwhile, the EMS property, warmth retention property, air permeability, moisture permeability, and bursting strength were selected as the evaluation index to evaluate the comprehensive properties of the fabrics by fuzzy mathematics. The results showed that all factors had different degrees of influence on EMSE, and the weft inlay stitch had both the functionality and thermal-wet comfort, which was excellent EMSE in knitted fabric. These results are expected to provide a reference to the design of EMS weft-knitted fabrics.

Evaluating numerous techniques for the effects of electromagnetic waves on the Electro Cardio Gram (ECG)

<p>Nowadays, due to the widespread use of mobile phones and the proliferation of mobile towers the human body parts especially the heart are getting affected. Furthermore, these waves are ubiquitous in our modern society, with various sources emitting these waves in our environment. As medical devices become more prevalent and wireless technologies continue to advance, concerns have been raised regarding the potential impact of electromagnetic waves on human health. It is important to monitor the condition of your heart. With the increase in the number of mobile phones, there is also an increase in electromagnetic radiation, which can affect the human heart. The heart is an important component of the human body and an electrocardiogram (ECG) can provide valuable information about its condition. ECG parameters can show how well the heart is working. In this paper, the author proposes how ECG parameters change under the influence of mobile phones in three different situations. A comprehensive experimental setup was devised. A group of healthy human subjects volunteered to participate in the study, with each subject undergoing ECG recording under controlled conditions. The subjects were exposed to varying intensities and frequencies of electromagnetic waves generated by a standardized source. Statistical analysis was performed to compare the ECG measurements obtained during exposure to electromagnetic waves with those obtained in a controlled environment without electromagnetic wave exposure. This study contributes to the growing body of research on the potential health effects of electromagnetic waves. By specifically focusing on the ECG signal, which is vital for cardiovascular diagnostics, this research provides valuable insights into the safety and reliability of using ECG in environments with electromagnetic wave exposure. The findings will help inform healthcare professionals, engineers, and policymakers to establish appropriate guidelines and safety measures concerning the use of medical devices and wireless technologies in proximity to patients or individuals with cardiac conditions.</p>

Wireless electromagnetic telemetry for metal cased wells: A novel approach with comprehensive channel analysis

Low-frequency electromagnetic telemetry has been widely adopted for downhole data acquisition in the oil and gas industry. However, its application in cased wells has been limited by the high magnetic permeability and low resistivity of the metal casing, which causes the casing to absorb most of the electromagnetic waves transmitted by the downhole transmitter, resulting in inaccurate downhole data acquisition. We propose a novel approach to address this issue by suspending a transmitter (tens of meters in length) in the casing and connecting it electrically to the metal casing through two connectors. By forming a circulation along the transmitter and the casing, low-frequency electromagnetic waves can penetrate through the casing and reach the formation for telemetry. To further enhance the signal received by the ground antenna, we conduct a comprehensive analysis of the complex downhole-to-surface communication channel. Notably, the channel, which consists of the formation, the casing, and the transmitter, is divided into a near field and a far field for separate analysis. Quantitative assessments of four crucial factors on the ground-received signal strength are also conducted, i.e., electromagnetic wave frequency and location of the excitation source in the transmitter, as well as the length and location of the transmitter in the well. An 80-meter telemetry device is designed and optimized for integration into the well test. Experimental results confirm the consistency between the theoretically analyzed and measured attenuation law of the ground-received signal, indicating the effectiveness of our wireless electromagnetic telemetry technique for cased wells.

A Dual Neural Network Approach to Topology Optimization for Thermal-Electromagnetic Device Design

Topology optimization for engineering problems often requires multiphysics (dual objective functions) and multi-timescale considerations to be coupled with manufacturing constraints across a range of target values. We present a dual neural network approach to topology optimization to optimize a 3-dimensional thermal-electromagnetic device (optical shutter) for maximum temperature rise across a range of extinction ratios while also considering manufacturing tolerances. One neural network performs the topology optimization, allocating material to each sub-pixel within a repeating unit cell. The size of each sub-pixel is selected with manufacturing considerations in mind. The other neural network is trained to predict performance of the device using extinction ratio and temperature rise over a given time period. Training data is generated using a finite element model for both the electromagnetic wave frequency domain and thermal time domain problems. Optimized designs across a range of targets are shown.

Simulation of filamentation dynamics of microwave discharge in nitrogen

The present study deals with numerical simulations of microwave (MW) discharges in nitrogen based on extended fluid-dynamic model. The set of governing equations for non-equilibrium gas-discharge plasma includes conservation equations for species number densities, electron energy density, Poisson equation for the electric field coupled to the multi-temperature Navier–Stokes fluid-dynamic equations taking into account thermal nonequilibrium; the power transmitted from MW radiation to electrons is determined from the Helmholtz equation. The kinetic scheme includes 61 reactions involving neutral molecules and atoms in the ground and electronically excited states, ions and electrons. The set of equations is solved for a two-dimensional problem under conditions of experiments at a pressure of 40 and 50 Torr and different electromagnetic wave frequencies and pulse duration. The dynamics of discharge formation and transition from the diffuse to the filament form is studied. The results are compared with experimental data, and a good agreement is shown for the time larger than 10 µs. The possible reasons for discrepancies at a shorter time are discussed and the effect of small oxygen impurities on the quantitative characteristics of the discharge are evaluated. The presence of a small oxygen impurity and seed electrons in the region of discharge formation yields a better agreement between numerical and experimental data.

Study on the propagation properties of terahertz waves in spacecraft dusty plasma sheath

Terahertz (THz) wave transmission in non-uniform dielectric layer containing dusty plasmas and aluminum (Al) is investigated by using the Wentzel–Kramer–Brillouin method. The application of magnetic field and increase in electromagnetic waves frequency are up-and-coming solutions for the “blackout” issue. Therefore, this work considers the effect of external magnetic field and electron density distribution. The electron density distributions are assumed to be double Gaussian profile, uniform distribution, Epstein distribution, and both right- and left-hand circularly polarized waves are analyzed. Then the effects of physical parameters and THz frequency on the transmission properties are analyzed. Results show that the presence of Al can shield electromagnetic waves, but we can still control THz waves in lower frequency band to achieve communication. By adjusting THz waves frequency and plasma parameters, waves can pass through the Al plasma sheath effectively under certain circumstances. It is expected to mitigate the blackout issue of hypersonic spacecraft.

Initial Finite-Difference Time-Domain (FDTD) Modeling of Graphene Based on Intra-band Surface Conductivity

Graphene is a single two-dimensional layer of carbon atoms arranged in a hexagonal lattice, possesses interesting optical properties, and has potential for applications in optical devices. Graphene exhibits tunable surface conductivity, which arises from its electronic band structure. Graphene surface conductivity is determined by its chemical potential, which can be controlled by bias voltage and/or chemical doping. The tunability of surface conductivity allowed to tailored optical properties of graphene, making it a controllable material for optoelectronic applications. Graphene surface conductivity is applied to update the field values at each time step in the Finite-Difference Time-Domain (FDTD) method, enabling us to visualize electromagnetic (EM) wave propagation in graphene. The current article serves as a starting point for developing the FDTD approach to simulate EM wave interactions with graphene, particularly at low frequencies. In this study, we use the Kubo formula for low EM wave frequency (10-105 GHz) at ambient temperature to calculate the intra-band surface conductivity of graphene. The outcome shows that the imaginer’s intra-band surface conductivity value is relatively considerable compared to the actual value at frequencies between 102 and 104. Moreover, the chemical potential exhibits a positive linear relationship with the imaginer intra-band surface conductivity and the intra-band conductivity falls to zero as the frequency rises to NIR.

Unlocking the Power of Reconfigurable Intelligent Surfaces: From Wireless Communication to Energy Efficiency and Beyond

Reconfigurable Intelligent Surfaces (RISs) are a class of metamaterials that have gained significant attention in recent years due to their potential to revolutionize wireless communication, sensing, and imaging technologies. RISs consist of a planar array of closely spaced, subwavelengthsized elements that can manipulate electromagnetic waves in a controllable manner. By reconfiguring the geometry, material properties, or phases of the individual elements on the RIS, the surface can be customized to meet specific application requirements. RISs can improve wireless communication by creating virtual channels, reducing interference, and improving overall quality. They can also enhance the efficiency of energy harvesting systems and improve sensing and imaging technologies by manipulating the propagation and scattering of electromagnetic waves. Additionally, RISs could be used to increase privacy and security by selectively blocking or allowing specific frequencies of electromagnetic waves. In this editorial, we provide a brief history of the development of RISs and discuss the design and fabrication of RIS structures. We also discuss RIS technology’s potential applications and benefits, including improved wireless communication, enhanced energy efficiency, advanced sensing and imaging, and increased privacy and security. Finally, we highlight some current research challenges and future directions for RIS technology. Overall, RISs hold great promise for advancing a wide range of technologies and applications, and we expect to see many exciting developments in this area.

Dispersion-boosting wideband electromagnetic transparency under extreme angles for TE-polarized waves.

Half-wave wall is the most common method of achieving electromagnetic (EM) transparency. Transmission windows can be formed when reflected waves are out of phase. Due to the interference mechanism, these windows are dependent on the frequency and incident angle of EM waves, leading to limited bandwidth, especially under extreme angles. In this letter, we propose to extend the bandwidth of the transmission window under extreme angles by utilizing dispersion. To this end, long metallic wires are embedded into the half-wave wall matrix, without increasing the physical thickness. Due to the plasma-like behavior of metallic wires under TE-polarization, the effective permittivity of the half-wave wall, rather than keeping constant, increases with frequency nonlinearly. Such a dispersion will boost wideband transparency in two aspects. On one hand, an additional transmission window will be generated where the effective permittivity equals that of the air; on the other hand, the 1st- and 2nd-order half-wave windows will be made quite closer. By tailoring the dispersion, the three windows can be merged to enable wideband transparency under extreme incident angles. A proof-of-principle prototype was designed, fabricated, and measured to verify this strategy. Both simulated and measured results show that the prototype can operate in the whole Ku-band under incident angle [70°, 85°] for TE-polarized waves. This work provides an effective method of achieving wideband EM transparency under extreme angles and may find applications in radar, communications, and others.

COMPARATIVE ANALYSIS OF EMBROIDERY AND SCREEN-PRINTING TECHNIQUES FOR TEXTILE-BASED FREQUENCY SELECTIVE SURFACES

Frequency Selective Surface (FSS) is a specialized structure used in the field of electromagnetic waves and radio frequency (RF) engineering. It is designed to exhibit selective transmission or reflection properties based on the frequency of the incident electromagnetic waves. This article describes the design, construction, and analysis of a textile-based band-stop frequency selective surface for use in the highly EM-polluted GSM, Wi-Fi, LTE, and WiMAX bands. A full-wave EM solver called CST Microwave Studio was used to develop and simulate the unit cell of the proposed FSS at the relevant frequency. In this study, embroidered and screen-printed textile based FSSs were designed. According to the results of this study, it was demonstrated that both embroidery and screen printing FSSs exhibit resonance at a frequency of 3.5 GHz. The screen printing method yielded the best results in terms of resonance frequency sensitivity, while the embroidery method showed a resonance frequency shift. It was observed that the stitch directions and density are important parameters in the embroidery method. Gaps between the embroidery paths in the production of embroidered FSSs resulted in differences from simulations due to the disruption of the structural integrity of the unit cell. Consequently, textile-based FSSs offer advantages over traditional FSSs. This study highlights the potential of textile FSSs as an effective means of reducing electromagnetic pollution, and suggests that further improvements in the design and production processes of textile FSSs can be made.

Electromagnetic field detectors based on spintronics devices

The paper proposes a model of an electromagnetic radiation sensor that uses the precession of the magnetization vector in a ferromagnet (ferromagnetic resonance) as a result of absorbing the energy of an incident electromagnetic wave, the generation of a spin current as a result of this precession, the generation of a spin-polarized current as a result of the passage of a spin current in a non-magnetic metal, and a change in the direction of magnetization of a ferromagnetic layer with a low coercive force (free layer) due to the passage of a spin-polarized current. Then the radiation will be detected by its effect on the electrical resistance of the entire structure, which depends on the mutual directions (parallel or antiparallel) of magnetization of the free and fixed (with a large coercive force) ferromagnetic layers (phenomenon of giant magnetic resistance). The dependence of the spin-polarized current in the device on the frequency and amplitude of the incident electromagnetic wave with linear polarization was calculated. A method of calculating the range of amplitude and frequency values of radiation that can be detected by the sensor has been developed. The parameters of this model are the detection time and the number of spin gates in one sensor. Calculations are given for a ferromagnetic layer made of permalloy and for spin valves with four different critical current values that determine the process of remagnetization of the free layer: 20, 50, 100, and 200 microamps.

Fusion of electromagnetic world and digital world through information metasurface: an interview with Tie Jun Cui.

Metasurfaces consist of subwavelength artificial elements (also called meta-atoms) arranged in a two-dimensional fashion. Through careful design of these elements, the metasurfaces can control the amplitude, phase, frequency, and polarization of electromagnetic (EM) waves. Information metasurfaces extend this concept by characterizing the meta-atoms in a digital manner, integrating functionalities for information processing. The information metasurfaces can simultaneously manipulate the EM waves in reprogrammable ways and modulate the digital information in real time, making the fusion of the EM world and digital world. The information metasurfaces have found diverse applications in wireless communications, intelligent sensing and imaging, intelligent computing, and internet of things (IoT). Prof. Tie Jun Cui is affiliated with Southeast University in Nanjing, China, where he serves as the Director of the State Key Laboratory of Millimeter Waves. He is a prominent researcher in the field of metamaterial, metasurface, and computational electromagnetics. He has proposed the concepts, and made systematic studies, of digital coding metasurfaces and programmable metasurfaces, and established the system of information metasurfaces, building a direct link between the electromagnetic world and digital world. NSR spoke to Professor Cui on the recent advancement and the prospects of information metasurfaces.