Frequency Dispersion Research Articles

Gene flow from Fraxinus cultivars into natural stands of Fraxinus pennsylvanica occurs range-wide, is regionally extensive, and is associated with a loss of allele richness.

In North America, a comparatively small number of Fraxinus (ash) cultivars were planted in large numbers in both urban and rural environments across the entire range of Fraxinus pennsylvanica Marsh (green ash) over the last 80 years. Undetected cultivar gene flow, if extensive, could significantly lower genetic diversity within populations, suppress differentiation between populations, generate interspecific admixture not driven by long-standing natural processes, and affect the impact of abiotic and biotic threats. In this investigation we generated the first range-wide genetic assessment of F. pennsylvanica to detect the extent of cultivar gene flow into natural stands. We used 16 EST-SSR markers to genotype 48 naturally regenerated populations of F. pennsylvanica distributed across the native range (1291 trees), 19 F. pennsylvanica cultivars, and one F. americana L. (white ash) cultivar to detect cultivar propagule dispersal into these populations. We detected first generation cultivar parentage with high confidence in 171 individuals in 34 of the 48 populations and extensive cultivar parentage (23-50%) in eight populations. The incidence of cultivar parentage was negatively associated with allele richness (R2 = 0.151, p = 0.006). The evidence for a locally high frequency of cultivar propagule dispersal and the interspecific admixture in eastern populations will inform Fraxinus gene pool conservation strategies and guide the selection of individuals for breeding programs focused on increasing resistance to the emerald ash borer (Agrilus planipennis Fairmaire), an existential threat to the Fraxinus species of North America.

Dispersion-assisted high-dimensional photodetector.

Intensity, polarization and wavelength are intrinsic characteristics of light. Characterizing light with arbitrarily mixed information on polarization and spectrum is in high demand1-4. Despite the extensive efforts in the design of polarimeters5-18 and spectrometers19-27, concurrently yielding high-dimensional signatures of intensity, polarization and spectrum of the light fields is challenging and typically requires complicated integration of polarization- and/orwavelength-sensitive elements in the space or time domains. Here we demonstrate that simple thin-film interfaces with spatial and frequency dispersion can project and tailor polarization and spectrum responses in the wavevector domain. By this means, high-dimensional light information can be encoded into single-shot imaging and deciphered with the assistance of a deep residual network. To the best of our knowledge, our work not only enables full characterization of light with arbitrarily mixed full-Stokes polarization states across a broadband spectrum with a single device and a single measurement but also presents comparable, if not better, performance than state-of-the-art single-purpose miniaturized polarimeters or spectrometers. Our approach can be readily used as an alignment-free retrofit for the existing imaging platforms, opening up new paths to ultra-compact and high-dimensional photodetection and imaging.

Polymer composites with magnetically active Eu-substituted NiZn ferrite fillers

In this research, the influence of Eu substitution on structural, quasi-static as well as dynamic (electro)magnetic properties of nickel zinc ferrites has been studied. The correlation of increasing europium content in the substituted NiZn ferrite filler with constant concentration (60 vol%) and the frequency dispersion of the complex permeability in magnetically active composite samples has been explored as well. Eu-substituted nickel-zinc ferrites with chemical composition Ni0.3Zn0.7EuxFe2-xO4, where x changes from 0.00 to 0.10 (step 0.02) ions per formula unit (i./f.u.), have been selected for their high initial permeability and in general good other magnetic parameters. On contrary, non-substituted ferrite of this composition exhibits undesirably low Curie temperature inconvenient for the use of these materials even at room temperatures. Therefore, Eu has been selected as a substituent for its known ability to increase the Curie temperature of prepared ferrites. The ferrites have been synthesized by means of the conventional solid state reaction method including double sintering at the temperatures of 950 °C and 1200 °C and used as magnetically active fillers incorporated into the magnetic polymer composites. Polyvinylchloride (PVC) has been used as the polymeric matrix. In spite of substituent amount x being the only parameter changing intentionally, the behavior of both the ferrite filler (deterministic until the creation of the second, non-magnetic, phase above x = 0.04) and the ferrite/PVC composites is quite hard to explain, and validate quantitatively, on the basis of simple theoretical assumptions. Nevertheless, the experiments confirmed positive effect of europium on the increase of Curie temperature. Also, the peak frequency of the imaginary component of the complex permeability has been found to be very sensitive to x, thus offering an effective tool for tuning the high-frequency properties of the composites useable for various applications, especially the shielding of microwave electromagnetic fields.

The role of Pleistocene dispersal in shaping species richness of sky island wintergreens from the Himalaya-Hengduan Mountains

In addition to topography and climate, biogeographic dispersal has been considered to influence plant diversity in the Himalaya-Hengduan Mountains (HHM), yet, the mode and tempo of sky island dispersal and its influence on species richness has been little explored. Through phylogenetic analysis of Gaultheria ser. Trichophyllae, a sky island alpine clade within the HHM, we test the hypothesis that dispersal has affected current local species richness. We inferred the dynamics of biogeographic dispersal with correlation tests on direction, distance, occurrence time, and regional species richness. We found that G. ser. Trichophyllae originated at the end of the Miocene and mostly dispersed toward higher longitudes (eastward). In particular, shorter intra-regional eastward dispersals and longer inter-regional westward dispersals were most frequently observed. We detected a prevalence of eastward intra-region dispersals in both glacial periods and interglacials. These dispersals may have been facilitated by the reorganization of paleo-drainages and monsoon intensification through time. We suggest that the timing of dispersal corresponding to glacial periods and the prevalence of intra-region dispersal, rather than dispersal frequency, most influenced the pattern of species richness of G. ser. Trichophyllae. This study facilitates a more comprehensive understanding of biodiversity in the sky islands within the HHM.

Characterization and application of submarine seismic ambient noise in the Bohai Sea and Yellow Sea

Submarine seismic ambient noise imaging combines current marine and on-land seismic detection technologies. Based on data from several broadband shallow-sea type ocean bottom seismometers (SOBSs) deployed in the Bohai Sea and north Yellow Sea, this paper analyzes the submarine seismic ambient noise characteristics. It explores the theory, technology, method and application of the submarine seismic ambient noise imaging using the single-point horizontal and vertical spectral ratio method (HVSR). The observations yield the following results: 1) Submarine seismic ambient noise has consistent and constant energy, making it an appropriate passive seismic source for submarine high-frequency surface wave investigation. 2) Using the HVSR approach, a single three-component OBS could differentiate between the basement and sediments. Array seismic observation could be utilized to extract the frequency dispersion curve and invert it to obtain the velocity structure for more accurate stratification. 3) The SOBS we use is suitable for submarine surface wave exploration. 4) Tomography results with greater resolution and deeper penetration could be obtained by combining active and passive sources in a simultaneous inversion of the HVSR and frequency dispersion curve. Seamless land-to-ocean seismic research can be accomplished with submarine seismic ambient noise imaging technologies.

Elastoacoustic wave propagation in a biphasic mechanical metamateriala).

Humans are sensitive to air-borne sound as well as to mechanical vibrations propagating in solids in the frequency range below 20 kHz. Therefore, the development of multifunctional filters for both vibration reduction and sound insulation within the frequency range of human sensitivity is a research topic of primary interest. In this paper, a high-contrast biphasic mechanical metamaterial, composed of periodic elastic solid cells with air-filled voids, is presented. By opening intercellular air-communicating channels and introducing channel-bridging solid-solid couplings, the frequency dispersion spectrum of the metamaterial can be modified to achieve complete and large bandgaps for acoustic and elastic waves. From a methodological viewpoint, the eigenproblem governing the free wave propagation is solved using a hybrid analytical-computational technique, while the waveform classification is based on polarization factors expressing the fraction of kinetic and elastic energies stored in the solid and fluid phases. Based on these theoretical results, a mechanical metafilter consisting of an array of a finite number of metamaterial cells is conceived to provide a technical solution for engineering applications. The forced response of the metafilter is virtually tested in a computational framework to assess its performance in passively controlling the propagation of broadband sound and vibration signals within solid and fluid environments. Quantitative results synthesized by transmission coefficients demonstrate that the metafilter can remarkably reduce the transmitted response in the frequency band of human sensitivity.

Analysis of relaxation processes and low frequency dispersion of soil contaminated

Analysis of relaxation processes and low frequency dispersion of soil contaminated

Understanding the trap-induced frequency dispersion in the C–V curve of AlGaN/GaN hetero-structure

This article investigates the trapping mechanism in AlGaN/GaN heterostructure. For our study, the traps within the AlGaN layer are introduced at the interface and near the interface of AlGaN/GaN, in the SILVACO TCAD tool. Frequency-dependent capacitance-Voltage (CVF) curves are obtained to study the impact of traps on device performance. From the CVF curve, it is found that the existence of interface traps introduces a shift in capacitance along the gate voltage axis. These traps introduce the threshold voltage ( VTH ) shift. Furthermore, a detailed study of near-interface traps (NITs) is done based on tunneling mechanisms. For our investigation, the NITs are positioned at 0.5 nm, 1 nm, and 1.5 nm away from the AlGaN/GaN interface. The response of the NITs reduces the capacitance value in the accumulation region. The response of the NITs is explained through the capacitance charge model and border trap model. For NITs placed 0.5 nm away from the interface, the frequency dispersion in the accumulation region becomes evident. On the contrary, the dispersion reduces significantly, as the NITs goes deeper upto 1.5 nm. The results indicate that the NITs nearer to the interface respond to high frequencies. Further, the temperature dependent capacitance–voltage analysis is done for both interface and NITs, to understand the effect of temperature on frequency dispersion.

Influence of gate dielectric property on the capacitance dispersion in organic-metal-insulator-semiconductor capacitors

The capacitance dispersion with frequency in an organic-metal–insulator-semiconductor capacitor (OMISCAP) is a vital phenomenon for predicting high-frequency applications. In this paper, the influence of the dielectric constant on the capacitance dispersion of OMISCAP is investigated by varying the dielectric constant of poly-4-vinyl-phenol using cross-linker concentration. The cut-off frequency of capacitance dispersion f c at which the capacitance drops by 10% of the plateau is introduced to measure the capacitance dispersion and the range of operating frequency. The variation of f c from 34 kHz to 50 kHz upon changing the dielectric constant of the insulator from 3.8 to 4.8 appears to be due to the combined effect of the capacitance variation in step with dielectric constant and the resistance variation due to field-induced charge accumulation in the semiconductor. The experimental results are validated using TCAD simulation and parameter extraction.

9‐2: Compact Model for Thin‐Film Transistors with Capacitance Frequency Dispersion

9‐2: Compact Model for Thin‐Film Transistors with Capacitance Frequency Dispersion

(O-05) ESTRADIOL LEVELS IN MEXICAN MEN WITH ERECTILE DYSFUNCTION

Abstract Introduction and Objective Erectile dysfunction is associated with various psychological and physiological causes, including hormone levels such as testosterone. The role of estradiol in male sexual function is controversial, and studies reporting its impact on erectile function have been inconsistent. The aim of this study was to describe the levels of testosterone and estradiol in Mexican men with erectile dysfunction, based on the severity of dysfunction. Materials and Methods Hormonal levels of TSH, T3, T4, LH, FSH, total and free testosterone, and estradiol were measured in men over 18 years of age with erectile dysfunction, attending a clinic in Mexico. Clinical variables were analyzed, estimating measures of central tendency and dispersion for numerical variables, and absolute and relative frequencies for categorical variables. The proportion of men with abnormal levels of estradiol and testosterone was calculated based on the severity of erectile dysfunction. Results A total of 70 participants were included. The average age was 53.9 years old (+/- 11.8); 18.5% had severe dysfunction, 65.7% had moderate dysfunction, 14.2% had mild to moderate dysfunction, and 1.4% had mild dysfunction. 35.7% were diabetic, and 34.2% were hypertensive. 62.8% had abnormal levels in at least one of the evaluated hormones: 5.7% had low TSH levels; 2.8% had low T3 levels; 1.4% had low T4 levels; 5.7% had low and 7.1% had high total testosterone levels; 12.8% had low and 2.8% had high free testosterone levels; 17.1% had high prolactin levels; 1.4% had low and 10% had high LH levels; 5.7% had high FSH levels. Estradiol level was high in 6 men (8.5%), 1 had mild-moderate and 5 moderate dysfunction; 8 men had low estradiol levels (11.42%), 1 had mild-moderate, 4 moderate and 3 severe dysfunction. Conclusions Alteration on the levels of Estradiol was common in the analyzed group of patients with erectile dysfunction, especially in men with moderate dysfunction, observed in 12.8% of them. Financing Boston Medical Group.

Atomic resolution microstructure study of Bi-doped SrTiO3

Intrinsic SrTiO3 is a quantum paraelectric, but moderately Bi-doped SrTiO3 exhibits dielectric frequency dispersion similar to relaxor ferroelectrics. In this paper, detailed electron microscopic studies of the microstructures of Bi-doped SrTiO3 samples were presented. It was found that the Sr sites were replaced by off-central Bi, resulting in tensile strain in the strontium titanate (STO) lattice. In the Bi-doped SrTiO3 samples, the valence of titanium mainly showed the Ti[Formula: see text] characteristic. According to the dielectric behavior and microstructure analysis, the polar nanoregions (PNRs) composed of strained SrTiO3 nanoclusters should be responsible for the ferroelectric relaxor behavior in samples with moderate Bi content.

2-D inverse synthetic aperture Ladar imaging and tracking of maneuvering extended Micro-Doppler UAVs in atmospheric turbulence with skewness

The inverse synthetic aperture Ladar (ISAL) is an important system for observation of space objects. Here, a 2-D ISAL imaging and tracking algorithm is proposed for low observable maneuvering extended objects tracking (M−EOT) such as small space UAVs. When imaging maneuvering objects with ISAL, dispersion and Doppler frequency time-variation exist in the range and cross-range echo signal, respectively. Additionally, the ISAL system can achieve high-resolution images for long-range moving objects, while its performance is affected by atmospheric turbulence. Atmospheric turbulence is a very complicated random state formed by the instability of regular laminar flow at a high maneuvering velocity, which is caused by the random motion of the atmosphere and lead to the random fluctuation of the atmospheric refractive index. Therefore, in real-time M−EOT scenario, the measurements distribution over the whole object is not symmetrical but distributed and skewed in some portions while a target maneuvers due to the unbalanced of reflection that caused by the atmospheric turbulence. In practice, the micro Doppler effect caused by micro moving components such as drone rotors will seriously affect the focused ISAL imaging of the M−EOT’s rigid body. To solve these problems in real-time low observable M−EOTs imaging and tracking from 2-D ISAL system, a novel robustness measurement model and recursion multi-Bernoulli track-before-detect filter based on a multiple model skewed non-symmetrically normal distribution is represented with more than one ellipse and lower complexity. In this paper, the Radon-Laplace method is presented to reduce this micro-Doppler effect in ISAL imaging. Additionally, we will eliminate the effect of atmospheric turbulence in ISAL Imaging by using the network-based variance–covariance estimation (NVCE) weighting method. In particular, we describe the M−EOT’s state through the random matrices model (RMM). In RMM, the extent is applied by one ellipse, which often lose information about size, heading, and shape, when the scatter centers are distributed symmetrically around the M−EOT’s centroid. In this paper, a new observation model used to modify a sub-RMM by considering the characteristics of 2-D ISAL data is proposed. Simulation results demonstrates the proposed robustness algorithm with the influence of the atmospheric turbulence and micro-Doppler.

Polaron Formation in Conducting Polymers: A Novel Approach to Designing Materials with a Larger NLO Response.

Substantial efforts have been made to design and investigate new approaches for high-performance nonlinear optical (NLO) materials. Herein, we report polaron formation in conducting polymers as a new approach to designing materials with a large NLO response. A comparative study of polypyrrole and polypyrrole-based polaron (nPy+ where n = 1, 3, 5, 7, and 9) is carried out for optoelectronic and NLO properties. The studied polarons (PPy+) show excellent electronic properties and have reduced ionization potential (IP) as compared to neutral PPy, and a monotonic decrease is observed with increased chain lengths (1Py to 9Py). Interesting trends of global reactivity descriptors can be seen; the softness (S) increases with an increase in the chain length of PPy, while the hardness (η) decreases in the same fashion. The EH-L gaps for the PPy+ polaronic state are significantly lower than their corresponding neutral PPy. In the polaronic model (PPy+), radicals decisively reduce the crucial excitation energy, reminiscent of excess electrons (alkali metals). The performed TDOS spectral analysis further justifies the better conductive and electronic properties of polarons (PPy+) with increased chain lengths (conjugation). The static hyperpolarizability response (βo) is recorded up to 1.3 × 102 au for 9Py, while for polaron 9Py+, it has increased up to 3.2 × 104 au. The static hyperpolarizability of the 9Py+ polaronic state is 246 times higher than that of the corresponding neutral analogue, 9Py. It is observed that the values of βo obtained at the CAM-B3LYP/6-311+G(d,p) level of theory are comparable to those obtained at the LC-BLYP and ωB97XD functionals. The βvec values show a strong correlation with the total hyperpolarizability (βo). Furthermore, the calculated second harmonic generation (SHG) values are up to 4.0 × 106 au at 532 nm, whereas electro-optic Pockel's effect (EOPE) is much more pronounced at the smaller dispersion frequency (1064 nm). The TD-DFT study reveal the red-shifted absorption maxima (λmax) with an increased length of PPy+. A significant reduction in excitation energy (ΔE) is observed with increased length of PPy and PPy+, which also favors the improved NLO response. Hence, the studied thermally conducting polypyrrole-based polarons (PPy+) are new entries into NLO materials with better electrical and optical features.

The temperature dependence investigation of the frequency dispersion of the electrical properties of lithium-iron spinel doped with La, Y

The temperature-frequency dependences of the electrical characteristics of Li2 Fe2,5-x Mex O4 (Ме=La;Y, x=0.01; 0.03; 0.05) spinels synthesized by the «sol-gel» autocombustion technology were obtained by the method of impedance spectroscopy in the temperature range of 298-473 K.
 Based on their analysis, the main mechanisms of conductivity of these materials in the studied temperature range were identified: hopping and activation, which are competing. The effect of doping lithium-iron spinels with rare-earth metal impurities on these conductivity mechanisms has been investigated. It has been established that the presence of impurities in small concentrations in the synthesized samples significantly decreases their conductivity, mainly due to destruction of the hopping mechanism of electronic conductivity.

Sound transmission loss of periodic Mindlin plates with non-uniformly spaced mass attachmentsa).

The sound transmission loss (STL) of wall partitions, especially in the coincidence region, is investigated. A Mindlin plate with periodically attached masses in a periodic "supercell" pattern is analyzed theoretically and experimentally for sound attenuation. Modeling the masses as points, analytical expressions for predicting the dispersion relation and frequency bandgaps of the plate are developed. The results show that varying the distances between the masses or the masses themselves can lead to the emergence of additional lower-frequency bandgaps and slightly decrease the bandwidth of the primary complete bandgap. Additionally, a triangular periodic pattern of point masses can provide a larger complete bandgap than the conventional rectangular pattern. The results are validated by numerical analyses using the wave and finite element method. Experimental testing is conducted on large-scale plates (2.4 m × 1 m) with periodically attached masses under diffuse field conditions, demonstrating the benefits of utilizing multiple scattering to increase the STL in the coincidence region of the bare plate. The proposed approach is seen to significantly increase the STL of wall partitions in the coincidence region and provides insights into the fundamental principles of sound and vibration attenuation in complex structures based on multiple scattering.

Impact of water vapor annealing treatments on Al2O3/diamond interface

Our group developed the first inversion-type p-channel diamond metal–oxide–semiconductor field-effect transistor, which featured normally off properties by employing water vapor annealing treatments for the oxygen-terminated diamond surface. Despite the comprehensive device-grade characterization, the impact of water vapor annealing treatments on the Al2O3/diamond interface has not been investigated in detail. In this work, we fabricated four diamond metal–oxide–semiconductor (MOS) capacitors without and with water vapor annealing treatments for various times of 30 min, 1 h, and 2 h and conducted the cycle capacitance–voltage (C–V) and simultaneous C–V measurements. The large cycle C–V shift existed in the sample without water vapor annealing treatment, whereas it was significantly suppressed by water vapor annealing treatments, indicating the effective passivation of the traps with long time constants. The simultaneous C–V results showed a similar trend that the frequency dispersion of the simultaneous C–V was dramatically reduced with water vapor annealing treatments, and the interface quality of Al2O3/diamond had a slight dependence on the water vapor annealing times. Based on simultaneous C–V measurements, the interface state density (Dit) at an energy level of 0.2–0.6 eV from the valence band edge of diamond was extracted for the different MOS capacitors. The Dit was reduced by one order of magnitude with water vapor annealing treatments, and it almost did not change with the water vapor annealing times. Besides, the flat band voltage shift and effective fixed charge were also dramatically reduced by water vapor annealing. The possible physical reason for the interface improvement by water vapor annealing treatments was discussed.

Towards clinical translation of 7 Tesla MRI in the human brain

Clinical translation of 7 tesla (T) MRI of the brain promises high image quality and potentially improved clinical diagnosis for patients compared to current standard lower field-strength MRI at 1.5 and 3T.Here we describe how physics principles underlying ultra-high field (UHF) strength MRI affect 7T image quality, and how these can be exploited to translate 7T brain imaging into clinical practice. UHF MRI profits from higher inherent signal-to-noise ratio (SNR) and a resultant increase in achievable spatial resolution or acceleration factors; increase in sensitivity to magnetic susceptibility differences and a higher amplitude of the Blood Oxygen Level Dependent (BOLD) signal; increase in longitudinal relaxation time; and increased frequency dispersion and spectral resolution in MR spectroscopy.Examples are presented of different brain pathologies, which are better illustrated on 7T compared to lower field strength by applying sequences and imaging techniques that exploit these intrinsic strengths of 7T MRI. This includes imaging of various vascular pathologies, epilepsy and brain tumours.

Achieving giant field-induced strain in BS-modified BNKT lead-free ferroelectric ceramics

Bi0.5Na0.5TiO3-Bi0.5K0.5TiO3 (BNT-BKT) binary systems with the morphotropic phase boundary (MPB) are promising candidates for piezoelectric actuators. However, pure BNT-BKT ceramics commonly exhibit unfavorable electric field-induced strain, which is insufficient to meet the requirements for actuator applications. Rare earth-containing dopants have been extensively explored to modify various materials due to their unique optical, magnetic, and electronic properties. Here, by introducing rare earth ion-containing dopants BiScO3 (BS), the electrical properties of Bi0.5(Na0.84K0.16)0.5TiO3 (BNKT) lead-free ferroelectric ceramics have been modified. X-ray diffraction (XRD) and scanning electron microscopy (SEM) results suggest that the introduction of BS results in an increase in tetragonal (T) phases, reduced grain sizes, and uniform morphologies. Ferroelectric measurements demonstrate that the BS-containing ceramics show slimmer hysteresis loops. The BNKT-2BS ceramics show a noteworthy improvement in electric field-induced strain, with bipolar and monopolar strains of 0.58% and 0.68%, respectively, which are almost 4 times and 6 times higher than those of pure BNKT ceramics. Furthermore, the corresponding normalized strain (d33*) also achieves high values of 967 pm/V and 1133 pm/V, respectively. Temperature-dependent dielectric measurements reveal that BS-containing ceramics exhibit good relaxor characteristics with frequency dispersion and diffuse phase transitions. This study presents a sufficient and feasible strategy for the optimization of strain performance in large displacement actuator applications.

The effect of 3D surface roughness on acoustic wave propagation in a cylindrical waveguide

This paper studies the acoustic wave scattering and attenuation in a cylindrical waveguide (pipe) with wall roughness varying along all three dimensions and roughness height smaller than the acoustic wavelength. Using the decomposition of the acoustic wave field into deterministic and random components, small perturbation method and Fourier transform the analytical solution of a 3-D averaged acoustic wave field is obtained. The correction term describing the mechanism of wave attenuation caused by roughness and determined by the modal cross-talk is also derived. The solution for the plane wave is validated in the frequency range extended well beyond the second cut-off frequency, where the crosstalk between the fundamental and non-axisymmetric modes are observed. The analytical solution is compared with the numerical results obtained with the Monte-Carlo method and Finite Element solver. The numerical study results have demonstrated a close agreement with the analytical solution for the averaged sound field, dispersion curves, and the wave attenuation effect expressed as the wavenumber correction term. A key novelty of this work is a comprehensive analysis of wave dispersion and cut-off frequency changes due to the presence of 3-D wall roughness in a pipe.