Lone Pair Research Articles

Interface-modulated kinetic differentials in electron and hole transfer rates as a key design principle for redox photocatalysis by Sb2VO5/QD heterostructures.

The efficient conversion of solar energy to chemical energy represents a critical bottleneck to the energy transition. Photocatalytic splitting of water to generate solar fuels is a promising solution. Semiconductor quantum dots (QDs) are prime candidates for light-harvesting components of photocatalytic heterostructures, given their size-dependent photophysical properties and band-edge energies. A promising series of heterostructured photocatalysts interface QDs with transition-metal oxides which embed midgap electronic states derived from the stereochemically active electron lone pairs of p-block cations. Here, we examine the thermodynamic driving forces and dynamics of charge separation in Sb2VO5/CdSe QD heterostructures, wherein a high density of Sb 5s2-derived midgap states are prospective acceptors for photogenerated holes. Hard-x-ray valence band photoemission spectroscopy measurements of Sb2VO5/CdSe QD heterostructures were used to deduce thermodynamic driving forces for charge separation. Interfacial charge transfer dynamics in the heterostructures were examined as a function of the mode of interfacial connectivity, contrasting heterostructures with direct interfaces assembled by successive ion layer adsorption and reaction (SILAR) and interfaces comprising molecular bridges assembled by linker-assisted assembly (LAA). Transient absorption spectroscopy measurements indicate ultrafast (<2ps) electron and hole transfer in SILAR-derived heterostructures, whereas LAA-derived heterostructures show orders of magnitude differentials in the kinetics of hole (<100ps) and electron (∼1ns) transfer. The interface-modulated kinetic differentials in electron and hole transfer rates underpin the more effective charge separation, reduced charge recombination, and greater photocatalytic efficiency observed for the LAA-derived Sb2VO5/CdSe QD heterostructures.

Seeing the Unseen: The Structural Influence of the Lone Pair Electrons in PbWO4.

Pair distribution function (PDF) analysis of the scheelite-type material PbWO4 reveals previously unidentified short-range structural distortions in the PbO8 polyhedra and WO4 tetrahedra not observed in the similarly structured CaWO4. These local distortions are a result of the structural influence of the Pb2+ 6s2 lone pair electrons. These are not evident from the Rietveld analysis of synchrotron X-ray or neutron powder diffraction data, nor do they strongly influence the X-ray PDF (XPDF). This illustrates the importance of neutron PDF (NPDF) in the study of such materials. First-principles density function theory (DFT) calculations show that the Pb2+ 6s2 electrons are hybridized with the O2- 2p electrons near the Fermi level. The presence of local-scale distortions has previously been neglected in studies of structure-functionality relationships in PbWO4 and other scheelite-structured photocatalytic materials, including BiVO4, and this observation opens new avenues for their optimization.

Embedding Te4+ into Sn4+-Based Metal Halide To Passivate Structure Defects for High-Performance Light-Emitting Application.

Low-dimensional lead-halide hybrids are an emerging class of optical functional material but suffer the problems of toxicity and poor air stability. Among lead-free metal halides, tin(IV)-based metal halides are promising optoelectronic materials due to their robust structure and environmental friendliness. However, their photoluminescence (PL) properties are poor, and the underlying mechanisms are still elusive. Herein, a stable Sn4+-based halide hybrid, (C4H7N2)2SnCl6, was developed, which however exhibits poor PL properties at room temperature (RT) due to the lattice defects and the robust crystal structure. To enhance its PL efficiency, the Te4+ ion with a stereoactive 5s2 lone pair has been introduced into the lattice. As a result, Te4+-doped (C4H7N2)2SnCl6 displays broadband orange emission (∼640 nm) with a PL efficiency of ∼46% at RT. Interestingly, Te4+-doped (C4H7N2)2SnCl6 shows triple emission bands at 80 K, which could be due to the synergistic effect of the organic cations and the self-trapped state induced by Te4+. Additionally, high-performance white light-emitting diodes were prepared using Te4+-doped (C4H7N2)2SnCl6, revealing the potential of this material for lighting applications. This study provides new insight into the PL mechanism of Sn4+-based metal-halide hybrids and thus facilitates the design and development of eco-friendly light-emitting metal halides.

Disentangling the effects of structure and lone-pair electrons in the lattice dynamics of halide perovskites

Halide perovskites show great optoelectronic performance, but their favorable properties are paired with unusually strong anharmonicity. It was proposed that this combination derives from the ns2 electron configuration of octahedral cations and associated pseudo-Jahn–Teller effect. We show that such cations are not a prerequisite for the strong anharmonicity and low-energy lattice dynamics encountered in these materials. We combine X-ray diffraction, infrared and Raman spectroscopies, and molecular dynamics to contrast the lattice dynamics of CsSrBr3 with those of CsPbBr3, two compounds that are structurally similar but with the former lacking ns2 cations with the propensity to form electron lone pairs. We exploit low-frequency diffusive Raman scattering, nominally symmetry-forbidden in the cubic phase, as a fingerprint of anharmonicity and reveal that low-frequency tilting occurs irrespective of octahedral cation electron configuration. This highlights the role of structure in perovskite lattice dynamics, providing design rules for the emerging class of soft perovskite semiconductors.

PbBeB2O5: A High-Performance Ultraviolet Nonlinear-Optical Crystal with Functional [BeB2O8]8- Group.

High-performance nonlinear-optical (NLO) crystals need to simultaneously meet multiple basic and conflicting performance requirements. Here, by using a partial chemical substitution strategy, the first noncentrosymmetric (NCS) PbBeB2O5 crystal with a BeB2O8 group was synthesized, exhibiting a two-dimensional [BeB2O5]∞ layer constructed by interconnecting BeB2O8 groups and bridged PbO4 with an active lone pair. The crystal shows a promising UV NLO functional feature, including a strong SHG effect of 3.5 × KDP (KH2PO4), large birefringence realizing phase matchability in the whole transparency region from 246 to 2500 nm, a short UV absorption edge of 246 nm, and single-crystal easy growth. Remarkably, theoretical studies reveal that the BeB2O8 group has high nonlinear activity, which could stimulate the discovery of a series of excellent NLO beryllium borates.

Facile synthesis of anthranilic acid based dual functionalized novel hyper cross-linked polymer for promising CO2 capture and efficient Cr3+ adsorption

A novel hyper cross-linked polymer of 2-Aminobenzoic acid (HCP-AA) is synthesized for the adsorption of Cr3+ and CO2. The Brunauer–Emmett–Teller surface area of HCP-AA is 615 m2 g−1. HCP-AA of particle size 0.5 nm showed maximum adsorption of Cr3+ for lab prepared wastewater (93%) while it was 88% for real industrial wastewater. It is might be due to electrostatic interactions, cation-π interactions, lone pair interactions and cation exchange at pH 7; contact time of 8 min; adsorbent dose 0.8 g. The adsorption capacity was calculated 52.63 mg g−1 for chromium metal ions at optimum conditions. Freundlich isotherm studies R2 = 0.9273 value is the best fit and follows pseudo second order kinetic model (R2 = 0.979). The adsorption is found non-spontaneous and exothermic through thermodynamic calculations like Gibbs free energy (ΔG), enthalpy change (ΔH) and entropy change (ΔS) were 6.58 kJ mol−1, − 60.91 kJ mol−1 and − 45.79 kJ mol−1 K−1, respectively. The CO2 adsorption capacity of HCP-AA is 1.39 mmol/g with quantity of 31.1 cm3/g (6.1 wt%) at 273Kwhile at 298 K adsorption capacity is 1.12 mmol/g with quantity 25.2 cm3/g (5 wt%). Overall, study suggests that carboxyl (–COOH) and amino (–NH2) groups may be actively enhancing the adsorption capacity of HCP-AA for Cr3+ and CO2.

Chemical bonding in phase-change chalcogenides

Almost all phase-change memory materials (PCM) contain chalcogen atoms, and their chemical bonds have been denoted both as ‘electron-deficient’ [sometimes referred to as ‘metavalent’] and ‘electron-rich’ [‘hypervalent’, multicentre]. The latter involve lone-pair electrons. We have performed calculations that can discriminate unambiguously between these two classes of bond and have shown that PCM have electron-rich, 3c–4e (‘hypervalent’) bonds. Plots of charge transferred between (ET) and shared with (ES) neighbouring atoms cannot on their own distinguish between ‘metavalent’ and ‘hypervalent’ bonds, both of which involve single-electron bonds. PCM do not exhibit ‘metavalent’ bonding and are not electron-deficient; the bonding is electron-rich of the ‘hypervalent’ or multicentre type.

Dual Polarization Strategy for Boosting Electron-Hole Separation toward Overall Water Splitting within Ferroelectric β-AIBIIIO2 (BIII = P3+, As3+, Sb3+, and Bi3+ for Lone Pairs).

Ferroelectric materials, leveraging an inherent built-in electric field, are excellent in suppressing electron-hole recombination. However, the reliance solely on bulk polarization remains insufficient in enhancing carriers' separation and migration, limiting their practical application in photocatalytic overall water splitting (POWS). To address this, we incorporated cations with ns2 lone pairs (P3+, As3+, Sb3+, and Bi3+) into ferroelectric semiconductors, successfully constructing 44 β-AIBIIIO2 photocatalysts with dual polarization. Through rigorous first-principles calculations and screenings for stability, band characteristics, and polarization, we identified four promising candidates: β-LiSbO2, β-NaSbO2, β-LiBiO2, and β-TlBiO2. Within these materials, lone pairs induce local polarization in the xy-plane. Additionally, out of the plane, there is robust bulk polarization along the z-direction. This synergistic effect of the combined local and bulk polarization significantly improves the separation efficiency of electron-hole pairs. Explicitly, the electron mobility of the four candidates ranges from 105 to 106 cm2 s-1 V-1, while the hole mobility also increases significantly compared to single-phase polarized materials, up to 106 cm2 s-1 V-1. Notably, β-TlBiO2 is predicted to achieve a solar-to-hydrogen (STH) efficiency of 17.2%. This study not only offers insights for water-splitting catalyst screening but also pioneers a path for electron-hole separation through the dual polarization strategy.

A True Reverse Anomeric Effect Does Exist After All: A Hydrogen Bonding Stereocontrolling Effect in 2-Iminoaldoses.

The reverse anomeric effect is usually associated with the equatorial preference of nitrogen substituents at the anomeric center. Once postulated as another anomeric effect with explanations ranging from electrostatic interactions to delocalization effects, it is now firmly considered to be essentially steric in nature. Through an extensive research on aryl imines from 2-amino-2-deoxyaldoses, spanning nearly two decades, we realized that such substances often show an anomalous anomeric behavior that cannot easily be rationalized on the basis of purely steric grounds. The apparent preference, or stabilization, of the β-anomer takes place to an extent that not only neutralizes but also overcomes the normal anomeric effect. Calculations indicate that there is no stereoelectronic effect opposing the anomeric effect, resulting from the repulsion between electron lone pairs on the imine nitrogen and the endocyclic oxygen. Such data and compelling structural evidence unravel why the exoanomeric effect is largely inhibited. We are now confident, as witnessed by 2-iminoaldoses, that elimination of the exo-anomeric effect in the α-anomer is due to the formation of an intramolecular hydrogen bond between the anomeric hydroxyl and the iminic nitrogen, thereby accounting for a true electronic effect. In addition, discrete solvation may help justify the observed preference for the β-anomer.

Isolable Spirocyclic Silylone: π-Delocalized Spiro[3.3]heptasila-2,6-diylidone.

Strained cyclic tetrylones are important synthons due to various synthetic applications. Connecting two cyclic tetrylone rings through a single shared quaternary group 14 element atom to form a spirocyclic molecule has been unexplored both theoretically and experimentally. The formation of a spirocyclic motif has been a synthetic challenge. In contrast, the reaction of amidinato disilicon(I) 1, (Me3P)2SiCl4, and KC8 afforded π-delocalized spiro[3.3]heptasila-2,6-diylidone2 and tetrasilacyclobutadiene byproducts 3 and 4. Compound 2 is the smallest spirocyclic tetrylone derivative, which is composed of a σ-type lone pair and delocalized π bond in each all-silicon spirocyclic ring. The electronic property is supported by its coordination with a W(CO)5 moiety.

The peptide bond: resonance increases bond order and complicates fragmentation.

The enhancement of the peptide bond order by a resonance in the lone pair of N and the π-bond of CO is analyzed. A decomposition of the bond order in terms of localized molecular orbitals is developed and applied to the peptide bond. A combination of two rotations of hybrid orbitals is proposed to improve the boundary treatment in the fragment molecular orbital method. The developed approach is applied to peptide bonds, and it is found crucial to retain the π orbital in the variational space of both fragments across the boundary. The interaction energies between conventional amino acid residues in Trp-cage (1L2Y) are discussed.

Structure Low Dimensionality and Lone-Pair Stereochemical Activity: the Key to Low Thermal Conductivity in the Pb-Sn-S System.

Recently, metal sulfides have begun to receive attention as potential cost-effective materials for thermoelectric applications beyond optoelectronic and photovoltaic devices. Herein, based on a comparative analysis of the structural and transport properties of 2D PbSnS2 and 1D PbSnS3, we demonstrate that the intrinsic effects that govern the low lattice thermal conductivity (κL) of these sulfides originate from the combination of the low dimensionality of their crystal structures with the stereochemical activity of the lone-pair electrons of cations. The presence of weak bonds in these materials, responsible for phonon scattering, results in inherently low κL of 1.0 W/m K in 1D PbSnS3 and 0.6 W/m K in 2D PbSnS2 at room temperature. However, the nature of the thermal transport is quite distinct. 1D PbSnS3 exhibits a higher thermal conductivity with a crystalline-like peak at low temperatures, while 2D PbSnS2 demonstrates glassy thermal conductivity in the entire temperature range investigated. First-principles density functional theory calculations reveal that the presence of antibonding states below the Fermi level, especially in PbSnS2, contributes to the very low κL. In addition, the calculated phonon dispersions exhibit very soft acoustic phonon branches that give rise to soft lattices and very low speeds of sounds.

Carbene-Stabilized Phosphagermylenylidene: A Heavier Analog of Isonitrile.

Phosphagermylenylidenes (R-P═Ge), as heavier analogs of isonitriles, whether in their free state or as complexes with a Lewis base, have not been previously identified as isolable entities. In this study, we report the synthesis of a stable monomeric phosphagermylenylidene within the coordination sphere of a Lewis base under ambient conditions. This species was synthesized by Lewis base-induced dedimerization of a cyclic phosphagermylenylidene dimer or via Me3SiCl elimination from a phosphinochlorogermylene framework. The deliberate integration of a bulky, electropositive N-heterocyclic boryl group at the phosphorus site, combined with coordination stabilization by a cyclic (alkyl)(amino)carbene at the low-valent germanium site, effectively mitigated its natural tendency toward oligomerization. Structural analyses and theoretical calculations have demonstrated that this unprecedented species features a P═Ge double bond, characterized by conventional electron-sharing π and σ bonds, complemented by lone pairs at both the phosphorus and germanium atoms. Preliminary reactivity studies show that this base-stabilized phosphagermylenylidene demonstrates facile release of ligands at the Ge atom, coordination to silver through the lone pair on P, and versatile reactivity including both (cyclo)addition and cleavage of the P═Ge double bond.

Surface-Assisted Selective Air Oxidation of Phosphines Adsorbed on Activated Carbon.

Trialkyl- and triarylphosphines readily adsorb onto the surface of porous activated carbon (AC) even in the absence of solvents through van der Waals interactions between the lone electron pair and the AC surface. This process has been proven by solid-state NMR techniques. Subsequently, it is demonstrated that the AC enables the fast and selective oxidation of adsorbed phosphines to phosphine oxides at ambient temperature in air. In solution, trialkylphosphines are oxidized to a variety of P(V) species when exposed to the atmosphere, while neat or dissolved triarylphosphines cannot be oxidized with air. When the trialkyl- and triarylphosphines PnBu3 (1), PEt3, (2), PnOct3 (3), PMetBu2 (4), PCy3 (5), and PPh3 (6) are adsorbed in a mono- or submonolayer on the surface of AC, in the absence of a solvent and at ambient temperature, they are quantitatively oxidized to the adsorbed phosphine oxides, 1ox-6ox, once air is admitted. No formation of any unwanted P(V) side products or water adducts is observed. The phosphine oxides can then be recovered in good yields by washing them off of the AC. The oxidation is likely facilitated by a radical activation of molecular oxygen due to delocalized electrons on the aromatic surface coating of AC, as proven by ESR. This easy and inexpensive oxidation method renders hydrogen peroxide or other oxidizers unnecessary and is broadly applicable to sterically hindered and even to air-stable triarylphosphines. Phosphines adsorbed at lower surface coverages on AC oxidize at a faster rate. All oxidation reactions were monitored by solution- and solid-state NMR spectroscopy.

Structure Optimization and Passivation Strategy Toward Efficient Integrated Perovskite/Pseudo‐Planar Heterojunction Solar Cells

AbstractBroadening near‐infrared (NIR) spectral response by virtue of organic bulk heterojunction (BHJ) is intensively explored to enhance power conversion efficiency (PCE) of perovskite solar cells (PSCs). However, the complex photovoltaic morphology and undesirable conductivity in BHJ structure can lead to the severe loss of photovoltaic performance, which are still urgent challenges for the commercialization of integrated PSCs (IPSCs). Recently, the gradual development of pseudo‐planar heterojunction (PPHJ) structure with excellent vertical phase separation and improved charge transfer can hopefully provide more opportunities for IPSCs. Herein, an optimization strategy is reported employing PPHJ structure with hydrophobic long alkyl chains as the NIR light‐absorbing layer in the devices, with which the light response of the IPSCs is extended to 920 nm. Owing to the lone electron pairs in the sulfur atoms, D18‐Cl has functioned as an effective additive that can effectively modulate the growth of the perovskite and passivate the defects. As a result, the optimized device has achieved an impressive PCE of 23.25%, while the short‐circuit current is enhanced from 22.93 to 25.14 mA cm−2. The long‐term and humidity stability of integrated perovskite/PPHJ solar cells are significantly elevated compared with IPSCs based on BHJ.

Nonalternant Nanographenes Containing N-Centered Cyclopenta[ef]heptalene and Aza[7]Helicene Units.

Introducing helical subunits into negatively curved π-systems has a significant effect on both the molecular geometry and photophysical properties; however, the synthesis of these helical π-systems embedded with nonbenzenoid subunits remains challenging due to the high strain deriving from both the curvature and helix. Here, we report a family of nonalternant nanographenes containing a nitrogen (N)-doped cyclopenta[ef]heptalene unit. Among them, CPH-2 and CPH-3 can be viewed as hybrids of benzoannulated cyclopenta[ef]heptalene and aza[7]helicene. The crystal structures revealed a saddle geometry for CPH-1, a saddle-helix hybrid for CPH-2, and a twist-helix hybrid for CPH-3. Experimental measurements and theoretical calculations indicate that the saddle moieties in CPHs undergo flexible conformational changes at room temperature, while the aza[7]helicene subunit exhibits a dramatically increased racemization energy barrier (78.2 kcal mol-1 for CPH-2, 143.2 kcal mol-1 for CPH-3). The combination of the nitrogen lone electron pairs of the N-doped cyclopenta[ef]heptalene unit with the twisted helix fragments results in rich photophysics with distinctive fluorescence and phosphorescence in CPH-1 and CPH-2 and the similar energy fluorescence and phosphorescence in CPH-3. Both enantiopure CPH-2 and CPH-3 display distinct circular dichroism (CD) signals in the UV-vis range. Notably, compared to the reported fully π-extended helical nanographenes, CPH-3 exhibits excellent chiroptical properties with a |gabs| value of 1.0 × 10-2 and a |glum| value of 7.0 × 10-3; these values are among the highest for helical nanographenes.

Enhancing Hydride Transfer in Catalytic Hydrogenation via σ-Electron-Induced Polarization of Imines.

In this study, we investigated the role of aluminum cations in facilitating hydride transfer during the hydrogenation of imines within the context of Noyori-type metal-ligand cooperative catalysis. We propose a novel model involving aluminum cations directly coordinated with imines to induce activation from the lone pair electron site, a phenomenon termed σ-induced activation. The aluminum metal-hydride amidate complex ("HMn-NAl") exhibits a higher ability of hydride transfer in the hydrogenation of imines compared to its lithium counterpart ("HMn-NLi"). Density functional theory (DFT) calculations uncover that the aluminum cation efficiently polarizes unsaturated bonds through σ-electron-induced activation in the transition state of hydride transfer, thereby enhancing substrate electrophilicity more efficiently. Additionally, upon substrate coordination, aluminum's coordination saturation improves the hydride nucleophilicity of the HMn-NAl complex via the breakage of the Al-H coordination bond.

An AIE dynamic a highly selective and expeditious benzothiazole-pyrazine based colorimetric chemosensor for Ni2+and fluorogenic chemosensor for Cu2+ and Al3+ detection

Considerable research focus has been devoted to the advancement of single-component sensors that can identify several analytes. In this regard, a complex chemosensor called BPA was created by building an imine link between benzothiazole and pyrazine. On the flexible imine link, the nitrogen atoms with lone pair electrons were arranged as possible coordination sites to enable changes in molecular configurations and charge transfer. In the aqueous acetonitrile environment, BPA displayed the discriminative identification of Ni2+ by a chromogenic response (color transition from colorless to yellow) and a fluorescence “decreasing” response for Cu2+ via ligand–metal charge transfer. Additionally, BPA exhibited recognition of Al3+ through a “turn-on” fluorogenic response facilitated by the chelation-enhanced fluorescence effect. The detection limits for Ni2+, Al3+, and Cu2+ were remarkably low, measuring 5.19 nM, 16 nM, and 214 nM, respectively. A 1:1 binding stoichiometry and precise complex modes between BPA and the target metal ions were successfully determined using extensive investigations, which encompassed the utilization of Job's plot, mass spectra, NMR, and DFT analysis. The deduced coordination mechanisms were corroborated by computational and experimental methodologies. BPA's potential practical uses were demonstrated by subsequently evaluating its ability to identify Ni2+, Al3+, and Cu2+ in actual water samples and validating its performance on-site using test strips.

Stability, Chemical Bonding, and Electron Lone Pair Localization in AsN at High Pressure by Density Functional Theory Calculations.

The covalent bonding framework of crystalline single-bonded cubic AsN, recently synthesized under high pressure and high temperature conditions in a laser-heated diamond anvil cell, is here studied by means of density functional theory calculations and compared to single crystal X-ray diffraction data. The precise localization of the nonbonding electron lone pairs and the determination of their distances and orientations are related to the presence of characteristic structural motifs and space regions of the unit cell dominated by repulsive electronic interactions, with the relative orientation of the electron lone pairs playing a key role in minimizing the energy of the structure. We find that the vibrational modes associated with the expression of the lone pairs are strongly localized, an observation that may have implications for the thermal conductivity of the compound. The results indicate the thermodynamic stability of the experimentally observed structure of AsN above ∼17 GPa, provide a detailed insight into the nature of the chemical bonding network underlying the formation of this compound, and open new perspectives to the design and high pressure synthesis of new pnictogen-based advanced materials for potential applications of energetic and technological relevance.

High-energy density cellulose nanofibre supercapacitors enabled by pseudo-solid water molecules

Compared with conventional electrochemical supercapacitors and lithium-ion batteries, the novel amorphous cellulose nanofibre (ACF) supercapacitor demonstrates superior electric storage capacity with a high-power density, owing to its fast-charging capability and high-voltage performance. This study unveils introduces an ACF supercapacitor characterised by a substantial energy density. This is achieved by integrating a singular layer of pseudo-solid water molecules (electrical resistivity of 1.11 × 108 Ω cm) with cellulose nanofibers (CNFs), establishing forming an electric double layer at the electrode interface. The enhanced energy storage in these high-energy density capacitors (8.55 J/m2) is explicated through the polarisation of protons and lone pair electrons on oxygen atoms during water electrolysis, commencing at 1.23 V. Improvements in energy density are attainable through CNF density enhancements and charging-current optimisation. The proposed ACF supercapacitor offers substantial promise for integration into the power sources of flexible and renewable paper-based electronic devices.