Free-flow Electrophoresis Device Research Articles

Miniaturizing free‐flow electrophoresis – a critical review

Free-flow electrophoresis (FFE) separation methods have been developed and investigated for around 50 years and have been applied not only to many types of analytes for various biomedical applications, but also for the separation of inorganic and organic substances. Its continuous sample preparation and mild separation conditions make it also interesting for online monitoring and detection applications. Since 1994 several microfluidic, miniaturized FFE devices were developed and experimentally characterized. In contrast to their large-scale counterparts microfluidic FFE (mu-FFE) devices offer new possibilities due to the very rapid separations within several seconds or below and the requirement for sample volumes in the microliter range. Eventually, these mu-FFE systems might find application in so-called lab-on-a-chip devices for real-time monitoring and separation applications. This review gives detailed information on the results so far published on mu-FFE chips, comprising its four main modes, namely free-flow zone electrophoresis (FFZE), free-flow IEF (FFIEF), free-flow ITP (FFITP), and free-flow field-step electrophoresis (FFFSE). The principles of the different FFE modes and the basic underlying theory are given and discussed with special emphasis on miniaturization. Different designs as well as fabrication methods and applied materials are discussed and evaluated. Furthermore, the separation results shown indicate that similar separation quality with respect to conventional FFE systems, as defined by the resolution and peak capacity, can be achieved with mu-FFE separations when applying much lower electrical voltages. Furthermore, innovations still occur and several approaches for hyphenated, more integrated systems have been proposed so far, some of which are discussed here. This review is intended as an introduction and early compendium for research and development within this field.

Microchip free‐flow electrophoresis on glass substrate using laser‐printing toner as structural material

In this work, a microfluidic free-flow electrophoresis device, obtained by thermal toner transferring on glass substrate, is presented. A microdevice can be manufactured in only 1 h. The layout of the microdevice was designed in order to improve the fluidic and electrical characteristics. The separation channel is 8 microm deep and presents an internal volume of 1.42 microL. The deleterious electrolysis effects were overcome by using a system that isolates the electrolysis products from the separation channel. The Joule heating dissipation in the separation channel was found to be very efficient up to a current density of 8.83 mA/mm(2) that corresponds to a power dissipation per unit volume of running electrolyte of 172 mW/microL. Promising results were obtained in the evaluation of the microdevices for the separation of ionic dyes. The microfluidic device can be used for a continuous sample pretreatment step for micro total analysis system.

Differential Analysis of Saccharomyces cerevisiae Mitochondria by Free Flow Electrophoresis

One major problem concerning the electrophoresis of mitochondria is the heterogeneity of mitochondrial appearance especially under pathological conditions. We show here the use of zone electrophoresis in a free flow electrophoresis device (ZE-FFE) as an analytical sensor to discriminate between different yeast mitochondrial populations. Impairment of the structural properties of the organelles by hyperosmotic stress resulted in broad separation profiles. Conversely untreated mitochondria gave rise to homogeneous populations reflected by sharp separation profiles. Yeast mitochondria with altered respiratory activity accompanied by a different outer membrane proteome composition could be discriminated based on electrophoretic deflection. Proteolysis of the mitochondrial surface proteome and the deletion of a single major protein species of the mitochondrial outer membrane altered the ZE-FFE deflection of these organelles. To demonstrate the usefulness of ZE-FFE for the analysis of mitochondria associated with pathological processes, we analyzed mitochondrial fractions from an apoptotic yeast strain. The cdc48(S565G) strain carries a mutation in the CDC48 gene that is an essential participant in the endoplasmic reticulum-associated protein degradation pathway. Mutant cells accumulate polyubiquitinated proteins in microsomal and mitochondrial extracts. Subsequent ZE-FFE characterization could distinguish a mitochondrial subfraction specifically enriched with polyubiquitinated proteins from the majority of non-affected mitochondria. This result demonstrates that ZE-FFE may give important information on the specific properties of subpopulations of a mitochondrial preparation allowing a further detailed functional analysis.

Using Channel Depth To Isolate and Control Flow in a Micro Free-Flow Electrophoresis Device

A multiple-depth micro free-flow electrophoresis chip (mu-FFE) has been fabricated with a 20-microm-deep separation channel and 78-microm-deep electrode channels. Due to the difference in channel heights, the linear velocity of buffer in the electrode channels is approximately 15 times that of the buffer in the separation channel. Previous mu-FFE devices have been limited by electrolysis product formation at the electrodes. These electrolysis products, manifested as bubbles, decreased the electric field and disrupted the buffer flow profile, limiting performance and preventing continuous operation. Using channel depth to control buffer flow over the electrodes and in the separation channel effectively removes electrolysis products, allowing continuous operation. The linear velocities in the channels were confirmed using particle velocimetry and compared well with values predicted using lubrication theory. A separation potential of 645 V could be applied before significant Joule heating was observed. This corresponded to an electric field of 586 V/cm in the separation channel, a 4-fold increase over our previous design. A separation of fluorescent standards was demonstrated using the new mu-FFE device. Resolution increased by a factor of 1.3 over our previous design, even when operated under similar conditions, suggesting that effective removal of electrolysis products is more important than originally thought.

Electrostatic induction of the electric field into free-flow electrophoresis devices

The electrostatic induction of an applied voltage causes electrophoretic separation under free-flow conditions and no electrolysis or electric current flowing between the metal electrodes was observed.

Free-flow zone electrophoresis and isoelectric focusing using a microfabricated glass device with ion permeable membranes

This paper describes a microfabricated free-flow electrophoresis device with integrated ion permeable membranes. In order to obtain continuous lanes of separated components an electrical field is applied perpendicular to the sample flow direction. This sample stream is sandwiched between two sheath flow streams, by hydrodynamic focusing. The separation chamber has two open side beds with inserted electrodes to allow ventilation of gas generated during electrolysis. To hydrodynamically isolate the separation compartment from the side electrodes, a photo-polymerizable monomer solution is exposed to UV light through a slit mask for in situ membrane formation. These so-called salt-bridges resist the pressure driven fluid, but allow ion transport to enable electrical connection. In earlier devices the same was achieved by using open side channel arrays. However, only a small fraction of the applied voltage was effectively utilized across the separation chamber during free-flow electrophoresis and free-flow isoelectric focusing. Furthermore, the spreading of the carrier ampholytes into the side channels resulted in a very restricted pH gradient inside the separation chamber. The chip presented here allows at least 10 times more efficient use of the applied potential and a nearly linear pH gradient from pH 3 to 10 during free-flow isoelectric focusing could be established. Furthermore, the application of hydrodynamic focusing in combination with free-flow electrophoresis can be used for guiding the separated components to specific chip outlets. As a demonstration, several standard fluorescent markers were separated and focused by free-flow zone electrophoresis and by free-flow isoelectric focusing employing a transversal voltage of up to 150 V across the separation chamber.

Free flow electrophoresis device for continuous on-line separation in analytical systems. An application in biochemical detection.

A free flow electrophoresis (FFE) device was developed for continuous electrophoretic separation of charged compounds and implemented in a continuous flow biochemical detection (BCD) system. These continuous separation characteristics make FFE well suitable for online implementation in a chromatographic or flow injection analysis system, in which an additional separation step of charged compounds is desired. In a heterogeneous biochemical flow assay for the determination of biotin, an analyte zone reacts with an excess of an affinity protein. Subsequently, the free binding sites of the affinity protein react with an excess of fluorescein-labeled ligand. Free and affinity protein-bound label are separated on the FFE device prior to fluorescence detection of the separated fractions. Biotin and streptavidin were chosen as, respectively, model ligand and affinity protein. Since all the compounds that are involved possess different electrophoretic properties, quantitative analysis is performed after completely separating the fluorescent affinity complex and labeled biotin in the FFE device within 2 min. Since the device is optically transparent, the separated zones can be detected in the separation compartment, using laser-induced fluorescence. The applicability of the BCD-FFE system in combination with a HPLC separation is demonstrated in the bioanalysis of biotin in human urine at the micromole per liter level.

A free-flow electrophoresis chip device for interfacing capillary isoelectric focusing on-line with electrospray mass spectrometry.

When electrospray ionisation mass spectrometry (ESI-MS) is used on-line with capillary isoelectric focusing (CIEF), the presence of the carrier ampholytes creating the IEF pH gradient is not desirable. With the purpose of removing these ampholytes, we have developed a free-flow electrophoresis (FFE) device and coupled it to CIEF. The different parameters inherent to the resulting CIEF/FFE system were optimised using ultraviolet absorbance (UV) detection. The on-line coupling of this system with ESI-MS was successfully realised for three model proteins (myoglobin, carbonic anhydrase I and beta-lactoglobulin B).

Application of binary buffer systems to free flow cell electrophoresis.

The applicability of free flow electrophoresis (FFE) was expanded towards processing of sensitive cells. The chamber medium was adjusted to a physiologic pH of 7.35 by a mixture of N-(2-hydroxyethyl)piperazine-N'-(3-propanesulfonic acid) (EPPS) and 2,2-bis(hydroxymethyl)-2,2'2"-nitrilotriethanol (BISTRIS). These substances proved to be nontoxic to sensitive cells such as human smooth muscle or thyroid cells. They enhanced the electrical conductivity of the medium only slightly so that a new cell electrophoresis separation medium could be prepared, which contained 30 mM NaCl together with or without 1 mM CaCl2 but did not generate problems of overheating the fluid. Suspended in this medium, human smooth muscle cells as well as human thyroid carcinoma cells remained viable single cells for at least 120 min. After this period they could be recultured to form monolayers. If electrophoresed in the Octopus preparative FFE device, they migrated as single cells and did not clot; therefore, their electrophoretic behavior could be determined exactly.

INTERVAL CARRIER FREE ELECTROPHORESIS FOR HIGH RESOLUTION PROTEIN PURIFICATION

ABSTRACT Interval free flow zone electrophoresis is a new mode of free flow zone electrophoresis (FFZE), which facilitates purification of proteins and other molecular substances at very high resolution. It can be performed in the commercially available free flow electrophoresis (FFE) apparatus Octopus. The specimens are loaded and unloaded as usual with the help of a thin buffer film flowing between the two glass plates of the FFE. However, as long as electrical current is applied to a specimen, the medium flow is turned off and conditions of static column electrophoresis are simulated within the FFE device. Thereby electrohydrodynamic flow effects, which widen the sample bands migrating within the electric field, are eliminated while optimal heat removal from the thin buffer film is still possible and a sophisticated technique of harvesting of fractions remains available. Thus interval FFZE offers a gentle preparative method for purification of many kinds of charged molecular species such as proteins or dyes at very high resolution.

Continuous Sample Pretreatment Using a Free-Flow Electrophoresis Device Integrated onto a Silicon Chip

ADVERTISEMENT RETURN TO ISSUEPREVArticleNEXTContinuous Sample Pretreatment Using a Free-Flow Electrophoresis Device Integrated onto a Silicon ChipDaniel E. Raymond, Andreas. Manz, and H. Michael. WidmerCite this: Anal. Chem. 1994, 66, 18, 2858–2865Publication Date (Print):September 15, 1994Publication History Published online1 May 2002Published inissue 15 September 1994https://doi.org/10.1021/ac00090a011RIGHTS & PERMISSIONSArticle Views821Altmetric-Citations231LEARN ABOUT THESE METRICSArticle Views are the COUNTER-compliant sum of full text article downloads since November 2008 (both PDF and HTML) across all institutions and individuals. These metrics are regularly updated to reflect usage leading up to the last few days.Citations are the number of other articles citing this article, calculated by Crossref and updated daily. Find more information about Crossref citation counts.The Altmetric Attention Score is a quantitative measure of the attention that a research article has received online. Clicking on the donut icon will load a page at altmetric.com with additional details about the score and the social media presence for the given article. Find more information on the Altmetric Attention Score and how the score is calculated. Share Add toView InAdd Full Text with ReferenceAdd Description ExportRISCitationCitation and abstractCitation and referencesMore Options Share onFacebookTwitterWechatLinked InReddit PDF (2 MB) Get e-Alerts Get e-Alerts

Free Flow Electrophoresis as a Purification Step of High Versatility for Bioproducts

AbstractElectrophoresis in general separates particles or molecules according to their specific mobility in an electric field. The mobility is a function of the net charge of the particle or the molecule, as well as of its size and the viscosity of the carrier. Unlike conventional gel electrophoresis (e.g. PAGE) free flow electrophoresis (FFE) continuously separates the components of a sample in ordinary buffer liquids. Thus in the case of FFE the net charge becomes the most important parameter. FFE devices are designed in a way that the influences of disturbing phenomena (e.g. electroosmosis, free convection, or adsorption), which lower the quality of the separation, are minimized. — Two FFE devices (ELPHOR VaP 22; BIOSTREAM) have been tested using a monoclonal antibody (IgG) and bovine serum albumin (BSA) as model substances. The aim of the tests was to determine the applicability of FFE to medium and large scale protein purification. — Compared to other purification methods (i.e. ion exchange) the costs of a FFE step in downstream processing are high. Thus the use of FFE in fields other than research may be limited to products of high value, where chromatography fails. There free flow electrophoresis may exhibit its specific advantages in the purification of fluids containing particles such as cell debris or organelles, or even in the separation of viable cells.