Patellar Fracture Research Articles

The Greco-Nice-Lag: Lag Screw and Double Nice Knot Fixation for Spiral Proximal Phalanx Fractures-Connecting the Shoulder to the Finger.

A colorful array of fixation options exists for the management of operative long oblique or spiral proximal phalanx fractures. These include lag screws, intramedullary devices, Kirschner wires, dorsal or lateral plating, and cerclage wiring. The "Nice double-suture knot," described by Boileau and colleagues, is a sliding, self-stabilizing knot initially created for tuberosity fixation in the shoulder. Nice knot cerclage has been described in shoulder arthroplasty, as well as for comminuted patella fractures. Here we describe a technique utilizing a single lag screw with 2 Nice knot cerclage sutures for the treatment of a spiral proximal phalanx fracture in a 65-year-old active smoker with osteopenia.

Evaluation of the functional result of early knee mobility in transverse patellar fractures treated with modified tension band wiring

Evaluation of the functional result of early knee mobility in transverse patellar fractures treated with modified tension band wiring

Discussion on the Clinical Effects and Countermeasures of Different Treatment Methods for Patella Fractures

Discussion on the Clinical Effects and Countermeasures of Different Treatment Methods for Patella Fractures

Design and Evaluation of Kirschner Wire Guide Device for Patellar Fracture Fixation

Abstract Identifying the optimal position for Kirschner wire (K-wire) is crucial in tension band wiring for patellar fracture. This study analyzed the ideal position and designed a guide device to aid precise K-wire insertion. The stress and displacement at 90° of flexion were compared to determine the optimal positions. The number of insertions and fluoroscopies, and operating times were recorded in a retrospective study. Intraoperative radiographs were used to measure the K-wire position relative to the patella in the coronal and sagittal planes to assess accuracy. The least stability occurred when the distance between the K-wires was 1/2 of the patellar width in the coronal plane and close to the patellar anterior surface. The number of K-wire insertions in the experimental group and control group (1.33 ±0.58 vs 3.8 ±1.03; P = 0.009), the number of fluoroscopies (2.67 ±0.58 vs 10 ±1.33; P = 0.007), and the operating time (55 ±8.66 min vs 82 ±9.49 min; P = 0.001) were significantly different. K-wires should parallel to each other, spaced 1/4 or 1/3 of the patellar width in the coronal plane, and 1/2 to 3/4 of the patellar thickness in the sagittal plane away from the patellar anterior surface. The surgeon could improve insertion accuracy with guide device.

Total patellectomy in a dog: Long term outcome

Patellectomy alters stifle biomechanics and has been demonstrated to result in degenerative joint lesions and to increase the force required for its extension. A 3-year-old male dog was admitted with right hindlimb lameness due to a penetrating wound in the stifle. After exploratory arthrotomy, diagnosis of straight patellar ligament avulsion and patellar fracture was established. In three months, the dog underwent three surgeries to repair the straight patellar ligament, drainage of the stifle, and total patellectomy. Antimicrobial and anti-inflammatory drugs were administered. Restriction of activity and physiotherapy were also advised. Patellectomy was performed because the patella was no longer adhered to its adjacent soft tissues and appeared to be necrotic. Follow-up information for seven years showed mild lameness in the affected limb and a body attempt to substitute the patella.

Combined Medial Quadriceps Tendon-Femoral Ligament and Medial Patellofemoral Ligament Reconstruction for Revision Patellofemoral Soft-Tissue Stabilization

Patients with recurrent patellofemoral instability in whom prior medial patellofemoral ligament (MPFL) reconstruction fails present unique challenges for revision soft-tissue stabilization owing to scar tissue formation, limited patellar bone stock for anchor placement, and increased risk of patellar fracture. We describe a technique for revision patellofemoral soft-tissue stabilization that combines MPFL and medial quadriceps tendon–femoral ligament reconstruction techniques through combined fixation to the patella with 1 suture anchor and soft-tissue fixation to the quadriceps tendon. The proposed technique maximizes restoration of resistance to lateral translation by attempting to re-create the native MPFL attachment and minimizes patellar fracture risk in the setting of poor bone stock through the use of a single 1.8-mm all-suture suture anchor rather than bone tunnels or multiple anchor placement for bony fixation.

Management of complete intra-articular distal femur and patellar fractures in an achondroplastic young adult; small is challenging’ revisited: a case-report

BackgroundPeople with achondroplasia exhibit distinct physical characteristics, but their cognitive abilities remain within the normal range. The challenges encountered during surgical procedures and perioperative care for achondroplastic individuals, are underrepresented in the existing literature.Case presentationIn this report, the management of a 26-year-old North-African achondroplastic male is highlighted. The patient suffered a complete intra-articular distal femur fracture (AO/OTA 33-C1) and an ipsilateral patella fracture (AO/OTA 34-C1). The patient’s unusual anatomical variations and the lack of suitable orthopedic implants posed significant surgical challenges, particularly in the context of a resource-limited developing country. Facial and spinal deformities, which are common in patients with achondroplasia, further complicated the anesthetic approach.ConclusionsThe limited information on operative management of fractures in achondroplastic patients necessitated independent decision-making and diverging from the convenient approach where clear guidance is available in the literature.

Serial Change in Patellar Height after Tension Band Wiring of Patellar Fractures.

Background and Objectives: Patella baja is a common complication after operative treatment for patellar fracture. This study aimed to investigate (1) the serial changes in patellar height and (2) the potential predictive factors for patellar height changes after tension band wiring (TBW) for patellar fractures. Materials and Methods: Forty-one patients who underwent TBW for patellar fracture between March 2019 and September 2022 were enrolled. To identify serial changes in patellar height, modified Blackburne-Peel index (mBPI) was assessed at just after surgery, at 3 months, at 6 months, at 1 year and at the final follow-up. Multiple regression analysis was conducted to identify factors correlated with mBPI difference between the contralateral side (considered as preoperative status) and injured side. Results: The postoperative mBPI exhibited a decline over time (mean mBPI immediately post operation/3 months/6 months/1 year/final follow-up: 0.69/0.63/0.63/0.62/0.61) Specifically, mBPI showed a significant reduction immediately post operation to 3 months (p < 0.001), although comparisons at other time points did not reveal significant differences. A lower position of the fracture was associated with a decrease in patellar height after surgery. Conclusions: Patellar height was mainly decreased from immediately post operation to 3 months. A fracture in a lower position of associated with decreased patellar height after the TBW of the transverse patellar fracture.

Study on the therapeutic effect of Kirschner wire tension band combined with anchor cross-stitch technique in the treatment of comminuted patellar inferopolar fractures.

Fractures of the inferior patellar pole, unlike other patellar fractures, present challenges for traditional surgical fixation methods. This article introduces the clinical technique and outcomes of using Kirschner wire tension band combined with anchor screw cross-stitch fixation for comminuted inferior patellar pole fractures. This retrospective case series study included 14 patients with comminuted inferior patellar pole fractures treated at our institution from September 1, 2020, to April 30, 2022. All patients underwent surgery using the Kirschner wire tension band with anchor screw cross-stitch technique. Follow-up assessments involved postoperative X-rays to evaluate fracture healing, as well as clinical parameters such as healing time, Visual Analog Scale (VAS) scores, range of motion (ROM), and Bostman scores. All patients were followed for an average of over 12 months, with no cases of internal fixation failure. Knee joint stability and function were excellent. X-rays revealed an average healing time of approximately 10.79 ± 1.53 weeks, hospitalization lasted 5.64 ± 1.15 days, surgery took approximately 37.86 ± 5.32 minutes, and intraoperative blood loss was 33.29 ± 8.15 ml. One patient experienced irritation from the internal fixation material. At the final follow-up, the Bostman score averaged 28.29 ± 0.83, knee joint flexion reached 131.07° ± 4.88°, all patients achieved full knee extension, and the VAS score was 0.36 ± 0.63. Kirschner wire tension band with anchor screw cross-stitch fixation for comminuted inferior patellar pole fractures delivered satisfactory clinical outcomes. This surgical method, characterized by its simplicity and reliability, is a valuable addition to clinical practice.

Tension band versus locking plate fixation for patella fractures - a protocol of a randomised controlled trial.

Following surgical management of patella fractures, patients commonly report pain; difficulties with weight-bearing tasks such as walking, running and climbing stairs; and restrictions in quality of life. Recently, a locking plate system for surgical management of patella fractures has been introduced. To date, no studies have compared standard treatment with tension band wiring with locking plate fixation in a randomised study design. We aim to compare the one-year patient-reported Knee Injury and Osteoarthritis Outcome subscale scores (KOOS5-subscales) after standard care tension band fixation with locking plate fixation for patients with patella fractures. This is a multicentre randomised and prospective clinical trial. A total of 122 patients will be included in the study, and the primary outcome will be the KOOS subscales at 12 months after surgery. Findings from the present study are expected to advance our understanding of outcome following surgical treatment of patella fractures. This study is funded, in part, by the Novo Nordisk Foundation, Denmark. gov ID: NCT04891549.

Effect of Rehabilitation Exercise Program on Outcomes of Patients Undergoing Patellar Fracture Surgery

Effect of Rehabilitation Exercise Program on Outcomes of Patients Undergoing Patellar Fracture Surgery

The Effect of Complex Korean Medical Treatment for Tibia, Fibula and Patellar Fractures in Patient with Sequelae of Poliomyelitis: A Case Report

The Effect of Complex Korean Medical Treatment for Tibia, Fibula and Patellar Fractures in Patient with Sequelae of Poliomyelitis: A Case Report

Outcomes of surgical treatment of patellar instability in children with Down syndrome

Backgroundpatellar instability is a relatively frequent musculoskeletal disorder in children with Down syndrome (DS). However, such a condition has seldom been studied in the literature, even less its surgical treatment. Different techniques have been offered for this condition; the evidence for surgical options is scarce and primarily based on case reports or case series with few patients and heterogeneous techniques. Given this background, we aimed to evaluate the outcomes of a uniform kind of surgical procedure for such a condition that combined lateral soft tissue release, medial patellofemoral ligament (MPFL) reconstruction (using a partial-thickness quadriceps tendon autograft), the Roux-Goldthwait procedure, and V-Y quadricepsplasty (if needed).Materials and methodsThis retrospective study involved 11 skeletally immature patients (12 knees; 9 males and 2 females), 5.5 to 14.1 years of age, with DS who had patellofemoral instability (PFI) and were managed by this technique between October 2018 and March 2020. Preoperative radiography, CT scan, and MRI were performed to evaluate the physis status, lower limb alignment, patellar height, trochlear morphology, and any associated knee pathology. A functional knee assessment was done by using the Kujala score and the modified Lysholm score.ResultsThe mean time of follow-up (± SD) was 47.7 ± 5.8 months (range: 39–56). Pre-operatively, the Kujala score (± SD) was 52.6 ± 14.3 (range: (31–74), and at final follow-up, it was 92.2 ± 4.4 (range: (88–98), showing a significant improvement (P < 0.001). The preoperative modified Lysholm score (± SD) was 54.3 ± 8.1 (range: 39–62), and at final follow-up it was 92.4 ± 5.3 (range: 82–96), showing a significant improvement (P < 0.001). All patients had a stable patella without a recurrence of instability and regained full ROM. There was no incidence of a patellar fracture or femoral physis injury.ConclusionsOur proposed technique of combined soft tissue procedures, including lateral soft tissue release, MPFL reconstruction (using a partial-thickness quadriceps tendon autograft), the Roux-Goldthwait procedure, and V-Y quadricepsplasty, was an effective method for treating patellar instability in children with DS while avoiding physeal injury and patellar fracture. Functional scores and radiological outcomes were improved.Level of evidenceIV; retrospective case series.

Computational evaluation of wire position using separate vertical wire technique and candy box technique for the fixation of inferior pole patellar fractures: a finite element analysis.

The separate vertical wire (SVW) technique and the improved candy box (CB) technique have been proposed for treating inferior pole patellar fractures. However, there is still a lack of clear explanation regarding the location of the wire passing through the patella. Five models of SVW techniques were established in different positions. Finite element analysis was then conducted to determine the optimal bone tunnel position for the SVW technique. Based on these findings, six groups of finite element models were created for CB techniques. The maximum displacement and stress on both the patella and steel wire were compared among these groups under 100-N, 200-N, 300-N, 400-N, and 500-N force loads. The results indicated that, in the SVW technique, the steel wire group near the fracture end of the longitudinal bone tunnel showed minimal displacement and stress on the patella when subjected to different forces. On the other hand, in the CB technique, both the patella and wire experienced minimal stress when a transverse bone tunnel wire was placed near the upper posterior aspect of patella. In conclusion, the SVW technique may require the bone tunnel wire to be positioned near the fractured end of the lower pole of the patella. On the other hand, in CB technique, the transverse bone tunnel wire passing through the patella may be close to its upper posterior aspect. However, further validation is necessary through comprehensive finite element analysis and additional biomechanical experiments.

Distinct risk profiles for short-term surgical complications and venous thromboembolism exist among extensor mechanism repair procedures.

Extensor mechanism injuries, which comprise patella fractures, patella tendon tearsand quadriceps tendon tears, are severely debilitating injuries and a common cause of traumatic knee pathology that requires surgical intervention. Risk factors for short-term surgical complications and venous thromboembolism (VTE) in this population have not been well characterised. The aim of this study was to identify perioperative risk factors associated with these short-term complications. The National Surgical Quality Improvement Program database was used to identify patients who underwent an isolated, primary extensor mechanism repair from 2015 to 2020. Patients were stratified by injury type. Demographic data were collected and compared. A multivariate logistic regression was used to control for demographic and comorbid factors while assessing risk factors for developing short-term complications. A total of 8355 patients were identified for inclusion in this study. Overall, 3% of patients sustained short-term surgical complications and 1% were diagnosed with VTE within 30 days of surgery. Patella fracture fixation had a nearly twofold higher risk for surgical complications compared to quadriceps tendon repair (p = 0.004). Patella tendon repair had a twofold higher risk for VTE (p = 0.045), specifically deep vein thrombosis (p = 0.020), compared to patella fracture fixation. Increasing age, smokingand American Society of Anesthesiologists Classifications 3 and 4 were also found to be risk factors for surgical complications (p = 0.012, p = 0.004, p = 0.011 and p = 0.032, respectively). This study used a nationally representative, widely validated, peer-reviewed database to provide valuable insights into risk factors for short-term postoperative complications associated with extensor mechanism repair procedures, revealing notable differences in risk profiles among distinct surgical procedures. The results of this study will inform surgeons and patients in enhancing risk assessment, guiding procedure-specific decision-making, optimising preoperative care, improving postoperative monitoringand contributing to future research of extensor mechanism injuries. Level III.

Transverse patella fracture fixation: A cadaveric biomechanical comparison of cannulated screws and anterior tension band versus low-profile, multiplanar mesh plating

IntroductionMultiplanar mesh plating of patella fractures has become more popular in recent years. It was the goal of this study to compare the biomechanical stability of cannulated screw with anterior tension band to multiplanar mesh plating for fixation of transverse patella fractures in cadaver specimens. Materials and MethodsEight matched pairs of fresh frozen cadaveric knees were obtained and soft tissues dissected leaving the extensor mechanism, joint capsule, and retinaculum intact. Transverse fractures were created at the mid-portion of the patella. For each pair, one specimen was repaired using cannulated screws with anterior tension band, and the second was repaired using multiplanar mesh plating. Each specimen underwent cyclic extension loading with loads increasing by 1.1 kg after every 50 cycles. Interfragmentary displacement was measured at the end of each interval at both 5° and 45° of knee flexion angle, with fixation failure defined by >2 mm displacement. ResultsThe specimens fixed with multiplanar mesh plating survived more cycles and higher loads than the specimens fixed with cannulated screws with anterior tension band (p = 0.011 comparing survival plots). After 150 cycles of extension loading, 3 of 8 of the specimens fixed with screws/tension band had failed, whereas none of the mesh plated specimens had failed. After 400 cycles, 7 of 8 of the screws/tension band had failed, whereas half of the mesh plated specimens had failed. ConclusionsWhile a more technically challenging and expensive technique, mesh plating for patella fractures appears to offer greater durability than traditional cannulated screw with tension banding.

Clinical application of anatomical locking plate in treatment of Rockwood type Ⅰ- Ⅲpatella fractures

To investigate the effectiveness of anatomical locking plate in the treatment of Rockwood type Ⅰ-Ⅲ patella fractures. The clinical data of 16 patients with patella fractures who were admitted between November 2021 and January 2023 and met the selection criteria was retrospectively analyzed. There were 14 males and 2 females, with an average age of 44.5 years (range, 19-72 years). Causes of injuries included tumble in 12 cases and traffic accident in 4 cases. The fractures were rated as type Ⅰ in 2 cases, type Ⅱ in 9 cases, and type Ⅲ in 5 cases according to Rockwood classification criteria. The time from injury to operation ranged from 6 to 15 days, with an average of 9 days. After fracture reduction, an appropriate anatomical locking plate was selected for internal fixation. The operation time, intraoperative blood loss, and incision healing were recorded; the Lysholm score, Böstman patella fracture efficacy score, knee joint mobility, and visual analogue scale (VAS) score were used to evaluate the knee joint function and pain degree; X-ray films were used to review the fracture reduction and healing. The operation time was 65-100 minutes (mean, 75.3 minutes); the intraoperative blood loss was 10-35 mL (mean, 25.6 mL). All incisions healed by first intention after operation. All patients were followed up 11-26 months (mean, 19.7 months). X-ray films showed that the fractures were reduced satisfactorily, and all achieved bony healing with healing time of 3-5 months. At last follow-up, the Lysholm score was 90-95 (mean, 93.0); the Böstman patella fracture efficacy score was 27-30 (mean, 28.8), of which 12 cases were excellent and 4 were good; the VAS score was 0-1 (mean, 0.3). There was no significant difference in the range of motion of the knee joint between the healthy and affected sides [145° (140°, 150°) vs 145° (140°, 145°); Z=1.890, P=0.059]. Choosing anatomical locking plates for Rockwood typeⅠ-Ⅲ patella fractures can achieve strong fixation with minimal surgical trauma, rapid recovery of knee joint function, and mild pain after operation.

Analysis of postoperative complications 5 years after osteosynthesis of patella fractures—a retrospective, multicenter cohort study

PurposeThe study aims to investigate the influence of patient- and fracture-specific factors on the occurrence of complications after osteosynthesis of patella fractures and to compare knee joint function, activity, and subjective pain levels after a regular postoperative course and after complications in the medium term.MethodsThis retrospective, multicenter cohort study examined patients who received surgery for patella fracture at level 1 trauma centers between 2013 and 2018. Patient demographics and fracture-specific variables were evaluated. Final follow-up assessments included patient-reported pain scores (NRS), subjective activity and knee function scores (Tegner Activity Scale, Lysholm score, IKDC score), complications, and revisions.ResultsA total of 243 patients with a mean follow-up of 63.4 ± 21.3 months were included. Among them, 66.9% of patients underwent tension band wiring (TBW), 19.0% received locking plate osteosynthesis (LPO), and 14.1% underwent screw osteosynthesis (SO). A total of 38 patients (15.6%) experienced complications (TBW: 16.7%; LPO: 15.2%; SO: 11.8%). Implant-related complications of atraumatic fragment dislocation and material insufficiency/dislocation, accounted for 50% of all complications, were significantly more common after TBW than LPO (p = 0.015). No patient-specific factor was identified as a general cause for increased complications. Overall, particularly following complications such as limited range of motion or traumatic refracture, functional knee scores were significantly lower and pain levels were significantly higher at the final follow-up when a complication occurred. Implant-related complications, however, achieved functional scores comparable to a regular postoperative course without complications after revision surgery.ConclusionThe present study demonstrated that implant-related complications occurred significantly more often after TBW compared to LPO. The complication rates were similar in all groups.

Peripheral Nerve Stimulation After Total Knee Arthroplasty and Non-Operable Patella Fracture.

Chronic knee pain, affecting over 25% of adults in the United States, has surged by 65% over the past two decades leading to rising functional deficits, mobility problems, and a diminished quality of life. While conservative management with pharmacologic and minimally invasive injections are pursued early in the disease process, total knee arthroplasty for refractory osteoarthritis of the knee is often considered. This procedure usually improves pain and functionality within the first three months. However, a significant portion of patients often suffer from postoperative pain that can become chronic and debilitating. We detail the case of a patient with a previous TKA as well as a non-operable patella fracture who obtained significant relief with PNS despite prior conservative and minimally invasive management.

Migration of patella tension band metal wires to popliteal fossa: Retrieval by posterior knee arthroscopy – A case report and literature review

Breakage of metal wires after fixation of patella fractures are common. However, migration of the broken wires to intraarticular location, popliteal fossa and distant sites can be least expected and a difficult scenario for retrieval. We describe in a 58-year male who presented with recurrent locking and migration of broken wires in popliteal fossa. he had fixation of patella fracture nine years ago. The metal wire was retrieved safely from the posterior lateral aspect of knee popliteal fossa by posterior knee arthroscopy using two posterior lateral portals. Through this case, we review the presentation of migrated wires, methods of retrieval and role of arthroscopy. Retrieval of migrated wires by knee arthroscopy can be successful in intraarticular location and in select cases at popliteal fossa, however with significant challenges. To avoid concerns with migration of wires, patients treated with wires for patella fractures should be adequately followed with radiography and sensitized for removal before breakage or at the time of breakage.