Model Of Fracture Healing Research Articles

Autologous ADSCs with exogenous NPY promotes fracture healing in ovariectomized rats

ObjectiveTo evaluate the role of autologous adipose-derived stem cells (ADSCs) with exogenous neuropeptide Y (NPY) on osteoporotic fracture healing. MethodsWe established a fracture healing model in ovariectomized rats of osteoporosis. Autologous ADSCs, isolated from rats' subcutaneous adipose tissue, with exogenous NPY were transplanted into the fracture site four times a week. The fracture healing was observiked with X-ray diagnostic techniques, and the rats’ tibias were taken out for section-staining and micro-CT scanning 3 and 6 weeks after fracture. Next, we explored the underlying mechanism by which the transplantation contributed to fracture healing. ResultsCo-culture and co-transplantation of ADSCs with NPY could stimulate the osteoporotic fracture healing. NPY may promote the osteogenic differentiation of ADSCs through Y1 receptor. ConclusionThis result provides a platform for the development of novel therapies for bone regeneration with endogenous ADSCs.

Salvianolic Acid B Accelerates Osteoporotic Fracture Healing via LncRNA-MALAT1/miR-155-5p/HIF1A Axis

Background: Osteoporotic fracture is a pathological fracture secondary to osteoporosis, causing disabilities and a heavy burden to the patients. In the previous study, we found that salvianolic acid B (SalB) promoted the osteogenesis of Mesenchymal Stem Cells (MSCs). Objective: This study aimed to explore the role of SalB in osteoporotic fracture healing, as well as the potential molecular mechanism. Methods: Human bone marrow mesenchymal stem cells (hMSCs) were treated with SalB or PBS in vitro, and an osteoporotic fracture model in Sprague-Dawley (SD) rats was established successfully. SalB or PBS was locally injected at the fracture. Eight weeks later, microCT was used to compare the healing of osteoporotic fractures with or without SalB. The relative expressions of mRNAs were measured by qRT-PCR. Bioinformatics analysis, RT-PCR, and dual luciferase reporter assay were utilized to detect the interrelation of genes. Immunohistochemistry staining was used to test expressions of proteins. Results: In the present study, we found that SalB significantly increased the level of lncRNA-- MALAT1 in a dose-dependent manner. Additionally, silencing lncRNA-MALAT1 inhibited the expressions of osteogenesis-related marker genes and abolished the effect of SalB on osteogenesis. Also, we found that lncRNA-MALAT1 sponged miR-155-5p, and miR-155-5p directly targeted HIF-1α. Using the osteoporotic fracture healing model, our result demonstrated that local administration of SalB could promote both bone and type H vessel formation in the calluses. The mechanical test further showed that SalB could improve the mechanical properties of fractured femurs. Conclusion: Taken together, our study reported that SalB could promote osteogenesis and type H vessel formation to accelerate osteoporotic fracture healing through the lncRNA-- MALAT1/miR-155-5p/HIF-1α axis.

Computational Modeling of Bone Fracture Healing Under Different Initial Conditions and Mechanical Load.

Computational model of bone healing can replace animal experiments to study the parameters affecting the bone healing process, thus reducing the damage to experimental animals and saving a lot of time. We propose a computational model for continuous simulation of four phases of bone healing to study the effects of mechanical environmental and biological factors, including initial conditions at the fracture site, mechanical stimulus loading, and vascular growth rate. A finite element model of mechanobiological fracture healing containing several pre-determined variables was developed for bone healing after fracture in sheep, which included many relevant parameters and biological effects during fracture healing, such as the effects of mechanical environment, blood supply level in the local fracture area, cell migration and diffusion, and resorption effects of fracture healing. The effects of several parameters on indices such as Young's modulus of the callus during bone healing were obtained by simulation. The initial geometry of the healing tissue and mechanical loading had the greatest effect on fracture healing, and different preset values were likely to cause delayed or non-healing fractures. Changed initial tissue properties of the healing tissue showed a nonlinear effect on fracture healing rather than a linear delay or advancement. Parameters related to angiogenesis had a greater effect on fracture healing compared to those related to cell migration. This paper quantified the effect of fracture healing pre-determined variables on fracture healing to better understand the application of mechanobiology in fracture healing simulation models and optimization of treatment strategies. The importance of initial conditions and loads on fracture healing has been shown to help physicians treat bone nonunion or delayed bone healing after a fracture.

Titanium versus plasma electrolytic oxidation surface-modified magnesium miniplates in a forehead secondary fracture healing model in sheep

Magnesium as a biodegradable material offers promising results in recent studies of different maxillo-facial fracture models. To overcome adverse effects caused by the fast corrosion of pure magnesium in fluid surroundings, various alloys, and surface modifications are tested in animal models. In specified cases, magnesium screws already appeared for clinical use in maxillofacial surgery. The present study aims to compare the bone healing outcome in a non-load-bearing fracture scenario of the forehead in sheep when fixed with standard-sized WE43 magnesium fixation plates and screws with plasma electrolytic oxidation (PEO) surface modification in contrast to titanium osteosynthesis. Surgery was performed on 24 merino mix sheep. The plates and screws were explanted en-bloc with the surrounding tissue after four and twelve weeks. The outcome of bone healing was investigated with micro-computed tomography, histological, immunohistological, and fluorescence analysis. There was no significant difference between groups concerning the bone volume, bone volume/ total volume, and newly formed bone in volumetric and histological analysis at both times of investigation. The fluorescence analysis revealed a significantly lower signal in the magnesium group after one week, although there was no difference in the number of osteoclasts per mm2. The magnesium group had significantly fewer vessels per mm2 in the healing tissue. In conclusion, the non-inferiority of WE43-based magnesium implants with PEO surface modification was verified concerning fracture healing under non-load-bearing conditions in a defect model. Statement of significanceTitanium implants, the current gold standard of fracture fixation, can lead to adverse effects linked to the implant material and often require surgical removal. Therefore, degradable metals like the magnesium alloy WE43 with plasma electrolytic oxidation (PEO) surface modification gained interest. Yet, miniplates of this alloy with PEO surface modification have not been examined in a fracture defect model of the facial skeleton in a large animal model. This study shows, for the first time, the non-inferiority of magnesium miniplates compared to titanium miniplates. In radiological and histological analysis, bone healing was undisturbed. Magnesium miniplates can reduce the number of interventions for implant removal, thus reducing the risk for the patient and minimizing the costs.

Silencing p75NTR regulates osteogenic differentiation and angiogenesis of BMSCs to enhance bone healing in fractured rats

BackgroundFractures heal through a process that involves angiogenesis and osteogenesis but may also lead to non-union or delayed healing. Bone marrow mesenchymal stem cells (BMSCs) have been reported to play a pivotal role in bone formation and vascular regeneration and the p75 neurotrophin receptor (p75NTR) as being an important regulator of osteogenesis. Herein, we aim to determine the potential mediation of BMSCs by p75NTR in bone healing.MethodsRat BMSCs were identified by flow cytometry (FCM) to detect cell cycle and surface markers. Then transfection of si/oe-p75NTR was performed in BMSCs, followed by Alizarin red staining to detect osteogenic differentiation of cells, immunofluorescence double staining was performed to detect the expression of p75NTR and sortilin, co-immunoprecipitation (CO-IP) was conducted to analyze the interaction between p75NTR and sortilin, and EdU staining and cell scratch assay to assess the proliferation and migration of human umbilical vein endothelial cells (HUVECs). The expression of HIF-1α, VEGF, and apoptosis-related proteins were also detected. In addition, a rat fracture healing model was constructed, and BMSCs-si-p75NTR were injected, following which the fracture condition was observed using micro-CT imaging, and the expression of platelet/endothelial cell adhesion molecule-1 (CD31) was assessed.ResultsThe results showed that BMSCs were successfully isolated, p75NTR inhibited apoptosis and the osteogenic differentiation of BMSCs, while si-p75NTR led to a decrease in sortilin expression in BMSCs, increased proliferation and migration in HUVECs, and upregulation of HIF-1α and VEGF expression. In addition, an interaction was observed between p75NTR and sortilin. The knockdown of p75NTR was found to reduce the severity of fracture in rats and increase the expression of CD31 and osteogenesis-related proteins.ConclusionSilencing p75NTR effectively modulates BMSCs to promote osteogenic differentiation and angiogenesis, offering a novel perspective for improving fracture healing.

Unique Spatial Transcriptomic Profiling of the Murine Femoral Fracture Callus: A Preliminary Report.

Fracture callus formation is a dynamic stage of bone activity and repair with precise, spatially localized gene expression. Metastatic breast cancer impairs fracture healing by disrupting bone homeostasis and imparting an altered genomic profile. Previous sequencing techniques such as single-cell RNA and in situ hybridization are limited by missing spatial context and low throughput, respectively. We present a preliminary approach using the Visium CytAssist spatial transcriptomics platform to provide the first spatially intact characterization of genetic expression changes within an orthopedic model of impaired fracture healing. Tissue slides prepared from BALB/c mice with or without MDA-MB-231 metastatic breast cancer cells were used. Both unsupervised clustering and histology-based annotations were performed to identify the hard callus, soft callus, and interzone for differential gene expression between the wild-type and pathological fracture model. The spatial transcriptomics platform successfully localized validated genes of the hard (Dmp1, Sost) and soft callus (Acan, Col2a1). The fibrous interzone was identified as a region of extensive genomic heterogeneity. MDA-MB-231 samples demonstrated downregulation of the critical bone matrix and structural regulators that may explain the weakened bone structure of pathological fractures. Spatial transcriptomics may represent a valuable tool in orthopedic research by providing temporal and spatial context.

Temporal dynamics of immune-stromal cell interactions in fracture healing.

Bone fracture repair is a complex, multi-step process that involves communication between immune and stromal cells to coordinate the repair and regeneration of damaged tissue. In the US, 10% of all bone fractures do not heal properly without intervention, resulting in non-union. Complications from non-union fractures are physically and financially debilitating. We now appreciate the important role that immune cells play in tissue repair, and the necessity of the inflammatory response in initiating healing after skeletal trauma. The temporal dynamics of immune and stromal cell populations have been well characterized across the stages of fracture healing. Recent studies have begun to untangle the intricate mechanisms driving the immune response during normal or atypical, delayed healing. Various in vivo models of fracture healing, including genetic knockouts, as well as in vitro models of the fracture callus, have been implemented to enable experimental manipulation of the heterogeneous cellular environment. The goals of this review are to (1): summarize our current understanding of immune cell involvement in fracture healing (2); describe state-of-the art approaches to study inflammatory cells in fracture healing, including computational and in vitro models; and (3) identify gaps in our knowledge concerning immune-stromal crosstalk during bone healing.

Unraveling IGFBP3-mediated m6A modification in fracture healing

BackgroundThis study investigates the role of IGFBP3-mediated m6A modification in regulating the miR-23a-3p/SMAD5 axis and its impact on fracture healing, aiming to provide insights into potential therapeutic targets. MethodsUtilizing fracture-related datasets, we identified m6A modification-related mRNA and predicted miR-23a-3p as a regulator of SMAD5. We established a mouse fracture healing model and conducted experiments, including Micro–CT, RT-qPCR, Alizarin Red staining, and Alkaline phosphatase (ALP) staining, to assess gene expression and osteogenic differentiation. ResultsIGFBP3 emerged as a crucial player in fracture healing, stabilizing miR-23a-3p through m6A modification, leading to SMAD5 downregulation. This, in turn, inhibited osteogenic differentiation and delayed fracture healing. Inhibition of IGFBP3 partially reversed through SMAD5 inhibition, restoring osteogenic differentiation and fracture healing in vivo. ConclusionThe IGFBP3/miR-23a-3p/SMAD5 axis plays a pivotal role in fracture healing, highlighting the relevance of m6A modification. IGFBP3's role in stabilizing miR-23a-3p expression through m6A modification offers a potential therapeutic target for enhancing fracture healing outcomes.

Computational models of bone fracture healing and applications: a review.

Fracture healing is a very complex physiological process involving multiple events at different temporal and spatial scales, such as cell migration and tissue differentiation, in which mechanical stimuli and biochemical factors assume key roles. With the continuous improvement of computer technology in recent years, computer models have provided excellent solutions for studying the complex process of bone healing. These models not only provide profound insights into the mechanisms of fracture healing, but also have important implications for clinical treatment strategies. In this review, we first provide an overview of research in the field of computational models of fracture healing based on CiteSpace software, followed by a summary of recent advances, and a discussion of the limitations of these models and future directions for improvement. Finally, we provide a systematic summary of the application of computational models of fracture healing in three areas: bone tissue engineering, fixator optimization and clinical treatment strategies. The application of computational models of bone healing in clinical treatment is immature, but an inevitable trend, and as these models become more refined, their role in guiding clinical treatment will become more prominent.

NR4A1 PROMOTES OSTEOGENIC DIFFERENTIATION OF MESENCHYMAL STEM CELLS AND IMPROVES INFLAMMATION-INHIBITED BONE REGENERATION

Stem cell therapy is an effective means to address the repair of large segmental bone defects. However, the intense inflammatory response triggered by the implants severely impairs stem cell differentiation and tissue regeneration. High-dose transforming growth factor β1 (TGF-β1), the most locally expressed cytokine in implants, inhibits osteogenic differentiation of bone marrow mesenchymal stem cells (BMSCs) and promotes tissue fibrosis, severely compromising the efficacy of stem cell therapy. Small molecule inhibitors of TGF-β1 can be used to ameliorate the osteogenic disorders caused by high concentrations of TGF-β1, but systemic inhibition of TGF-β1 function will cause strong adverse effects. How to find safe and reliable molecular targets to antagonize TGF-β1 remains to be elucidated. Orphan nuclear receptor Nr4a1, an endogenous inhibitory molecule of TGF-β1, suppresses tissue fibrosis, but its role in BMSC osteogenesis is unclear. We found that TGF-β1 inhibited Nr4a1 expression through HDAC4. Overexpression of Nr4a1 in BMSCs reversed osteogenic differentiation inhibited by high levels of TGF- β1. Mechanistically, RNA sequencing showed that Nr4a1 activated the ECM-receptor interaction and Hippo signaling pathway, which in turn promoted BMSC osteogenesis. In bone defect repair and fracture healing models, transplantation of Nr4a1-overexpressing BMSCs into C57BL/6J mice or treatment with the Nr4a1 agonist Csn-B significantly ameliorated inflammation-induced bone regeneration disorders. In summary, our findings confirm the endogenous inhibitory effect of Nr4a1 on TGF- β1 and uncover the effectiveness of Nr4a1 agonists as a therapeutic tool to improve bone regeneration, which provides a new solution strategy for the treatment of clinical bone defects and inflammatory skeletal diseases.

SPATIAL TRANSCRIPTOMICS OF FRACTURE HEALING

Fracture healing is a spatially controlled process involving crosstalk of multiple tissues. To precisely capture and understand molecular mechanism underlying impaired healing, there is a need to integrate spatially-resolved molecular analyses into preclinical fracture healing models. I will present our recent data obtained by spatial transcriptomics of musculoskeletal samples from fracture healing studies in mice. Subsequently, I will show how spatial transcriptomics can be integrated into multimodal approaches in preclinical fracture healing models. In combination with established in vivo imaging and emerging omics techniques, spatially-resolved analyses have the potential to elucidate the molecular mechanisms underlying impaired healing with optimization of treatments.

The influence of polyimide MP-1™ wear particles on a rodent closed fracture healing model.

Joint replacements provide pain free movement for the injured or our aging population. Current prothesis mainly consist of hard metal on metal, or ceramic femoral head on ultra-high-molecular weight polyethylene (UHMWPE). In this study, a rodent fracture model was used to test the influence of wear debris from a high-performance polymer (polyimide MP-1™). Saline, MP-1™ Low Dose in Saline (1%), or MP-1 High Dose (2%) in Saline was injected directly into a standard closed unilateral femoral fracture in 12-week old Sprague Dawley rats (n = 25) for 1, 3 and 6 weeks. Endpoints included radiography, micro-computed tomography, mechanical testing and paraffin histology. No adverse effects from the wear particles were observed from the current study based on radiology, mechanical or histological data. Although the particles were present, histological analysis revealed a progression in healing between the Polyimide treated groups and the non-treated saline control groups over the duration of 1, 3, and 6 weeks, with no inhibition from the particles. The MP-1™ wear debris generated are larger than 1 µm thus are not able to be engulfed by macrophages and cause osteolysis. This family of polymers (polyimides) may be an ideal material to consider for articulating joints and other implants in the human body.

Advantages and Limitations of Diabetic Bone Healing in Mouse Models: A Narrative Review.

Diabetes represents a major risk factor for impaired fracture healing. Type 2 diabetes mellitus is a growing epidemic worldwide, hence an increase in diabetes-related complications in fracture healing can be expected. However, the underlying mechanisms are not yet completely understood. Different mouse models are used in preclinical trauma research for fracture healing under diabetic conditions. The present review elucidates and evaluates the characteristics of state-of-the-art murine diabetic fracture healing models. Three major categories of murine models were identified: Streptozotocin-induced diabetes models, diet-induced diabetes models, and transgenic diabetes models. They all have specific advantages and limitations and affect bone physiology and fracture healing differently. The studies differed widely in their diabetic and fracture healing models and the chosen models were evaluated and discussed, raising concerns in the comparability of the current literature. Researchers should be aware of the presented advantages and limitations when choosing a murine diabetes model. Given the rapid increase in type II diabetics worldwide, our review found that there are a lack of models that sufficiently mimic the development of type II diabetes in adult patients over the years. We suggest that a model with a high-fat diet that accounts for 60% of the daily calorie intake over a period of at least 12 weeks provides the most accurate representation.

Intramedullary implant stability affects patterns of fracture healing in mice with morphologically different bone phenotypes

Almost all prior mouse fracture healing models have used needles or K-wires for fixation, unwittingly providing inadequate mechanical stability during the healing process. Our contention is that the reported outcomes have predominantly reflected this instability, rather than the impact of diverse biological conditions, pharmacologic interventions, exogenous growth factors, or genetic considerations. This important issue becomes obvious upon a critical review of the literature. Therefore, the primary aim of this study was to demonstrate the significance of mouse-specific implants designed to provide both axial and torsional stability (Screw and IM Nail) compared to conventional pins (Needle and K-wires), even when used in mice with differently sized marrow canals and diverse genetic backgrounds. B6 (large medullary canal), DBA, and C3H (smaller medullary canals) mice were employed, all of which have different bone morphologies. Closed femoral fractures were created and stabilized with intramedullary implants that provide different mechanical conditions during the healing process. The most important finding of this study was that appropriately designed mouse-specific implants, providing both axial and torsional stability, had the greatest influence on bone healing outcomes regardless of the different bone morphologies encountered. For instance, unstable implants in the B6 strain (largest medullary canal) resulted in significantly greater callus, with a fracture region mainly comprising trabecular bone along with the presence of cartilage 28 days after surgery. The DBA and C3H strains (with smaller medullary canals) instead formed significantly less callus, and only had a small amount of intracortical trabeculation remaining. Moreover, with more stable fracture fixation a higher BV/TV was observed and cortices were largely restored to their original dimensions and structure, indicating an accelerated healing and remodeling process. These observations reveal that the diaphyseal cortical thickness, influenced by the genetic background of each strain, played a pivotal role in determining the amount of bone formation in response to the fracture. These findings are highly important, indicating the rate and type of tissue formed is a direct result of mechanical instability, and this most likely would mask the true contribution of the tested genes, genetic backgrounds, or various therapeutic agents administered during the bone healing process.

Depth camera-based model for studying the effects of muscle loading on distal radius fracture healing

BackgroundDistal radius fractures (DRFs) treated with volar locking plates (VLPs) allows early rehabilitation exercises favourable to fracture recovery. However, the role of rehabilitation exercises induced muscle forces on the biomechanical microenvironment at the fracture site remains to be fully explored. The purpose of this study is to investigate the effects of muscle forces on DRF healing by developing a depth camera-based fracture healing model. MethodFirst, the rehabilitation-related hand motions were captured by a depth camera system. A macro-musculoskeletal model is then developed to analyse the data captured by the system for estimating hand muscle and joint reaction forces which are used as inputs for our previously developed DRF model to predict the tissue differentiation patterns at the fracture site. Finally, the effect of different wrist motions (e.g., from 60° of extension to 60° of flexion) on the DRF healing outcomes will be studied. ResultsMuscle and joint reaction forces in hands which are highly dependent on hand motions could significantly affect DRF healing through imposed compressive and bending forces at the fracture site. There is an optimal range of wrist motion (i.e., between 40° of extension and 40° of flexion) which could promote mechanical stimuli governed healing while mitigating the risk of bony non-union due to excessive movement at the fracture site. ConclusionThe developed depth camera-based fracture healing model can accurately predict the influence of muscle loading induced by rehabilitation exercises in distal radius fracture healing outcomes. The outcomes from this study could potentially assist osteopathic surgeons in designing effective post-operative rehabilitation strategies for DRF patients.

Prevention of sclerosis around cannulated screw after treatment of femoral neck fractures with bioceramic nails: a finite element analysis

PurposeConventional cannulated screws (CS) are the main treatment method for femoral neck fractures (FNF). However, the rate of femoral head necrosis remains high after FNF treatment. The study aimed to compare the biomechanical features of different internal fixation materials for the treatment of Pauwel type III FNF to explore new strategies for clinical management.MethodsA new material was prepared by applying casting, freeze drying and sintering process. The independently developed calcium magnesium silicate ceramic powder and hydrogel solution were evenly mixed to obtain a high-viscosity bio-ink, and a bioceramic nail (BN) with high mechanical strength and high fracture toughness was successfully prepared. Four internal fixations were developed to establish the Pauwel type III FNF and healed fracture finite element models: A, three CSs; B, three BNs; C, two BNs and one CS; D, one BN and two CSs. Von Mises stress and displacement of the implants and femur were observed.ResultsThe measured Mg content in ceramic powder was 2.08 wt%. The spectral data confirmed that the ceramic powder has high crystallinity, which coincides with the wollastonite-2 M (PDF# 27–0088). The maximum von Mises stresses for the four models were concentrated in the lower part of the fracture surface, at 318.42 Mpa, 103.52 MPa, 121.16 MPa, and 144.06 MPa in models A, B, C, and D, respectively. Moreover, the maximum Von-mises stresses of the implants of the four models were concentrated near the fracture end at 243.65 MPa (A) and 58.02 MPa (B), 102.18 MPa (C), and 144.06 MPa (D). The maximum displacements of the four models were 5.36 mm (A), 3.41 mm (B), 3.60 mm (C), and 3.71 mm (D). The displacements of the three models with BNs were similar and smaller than that of the triple CS fracture model. In the fracture healing models with and without three CSs, the greatest stress concentration was scattered among the lowest screw tail, femoral calcar region, and lateral femur shaft. The displacement and stress distributions in both models are generally consistent. The stress distribution and displacement of the three healed femoral models with BNs were essentially identical to the healing models with three CSs. The maximum von Mises stresses were 65.94 MPa (B), 64.61 MPa (C), and 66.99 MPa (D) while the maximum displacements of the three healed femoral models were 2.49 mm (B), 2.56 mm (C), and 2.49 mm (D), respectively.ConclusionsBioceramic nails offer greater advantages than conventional canulated screws after femoral neck fractures. However, the combination of bioceramic nails and CSs is more clinically realistic; replacing all internal fixations with bioceramic nails after the healing of femoral neck fractures can solve the problem of sclerosis formation around CSs and improve bone reconstruction by their bioactivity.

Reambulation following hindlimb unloading attenuates disuse-induced changes in murine fracture healing.

Patients with bone and muscle loss from prolonged disuse have higher risk of falls and subsequent fragility fractures. In addition, fracture patients with continued disuse and/or delayed physical rehabilitation have worse clinical outcomes compared to individuals with immediate weight-bearing activity following diaphyseal fracture. However, the effects of prior disuse followed by physical reambulation on fracture healing cellular processes and adjacent bone and skeletal muscle recovery post-injury remains poorly defined. To bridge this knowledge gap and inform future treatment and rehabilitation strategies for fractures, a preclinical model of fracture healing with a history of prior unloading with and without reambulation was employed. First, skeletally mature male and female C57BL/6J mice (18 weeks) underwent hindlimb unloading by tail suspension (HLU) for 3 weeks to induce significant bone and muscle loss modeling enhanced bone fragility. Next, mice had their right femur fractured by open surgical dissection (stabilized with 24-gauge pin). The, mice were randomly assigned to continued HLU or allowed normal weight-bearing reambulation (HLU + R). Mice given normal cage activity throughout the experiment served as healthy age-matched controls. All mice were sacrificed 4-days (DPF4) or 14-days (DPF14) following fracture to assess healing and uninjured hindlimb musculoskeletal properties (6-10 mice per treatment/biological sex). We found that continued disuse following fracture lead to severely diminished uninjured hindlimb skeletal muscle mass (gastrocnemius and soleus) and femoral bone volume adjacent to the fracture site compared to healthy age-matched controls across mouse sexes. Furthermore, HLU led to significantly decreased periosteal expansion (DPF4) and osteochondral tissue formation by DPF14, and trends in increased osteoclastogenesis (DPF14) and decreased woven bone vascular area (DPF14). In contrast, immediate reambulation for 2 weeks after fracture, even following a period of prolonged disuse, was able to increase hindlimb skeletal tissue mass and increase osteochondral tissue formation, albeit not to healthy control levels, in both mouse sexes. Furthermore, reambulation attenuated osteoclast formation seen in woven bone tissue undergoing disuse. Our results suggest that weight-bearing skeletal loading in both sexes immediately following fracture may improve callus healing and prevent further fall risk by stimulating skeletal muscle anabolism and decreasing callus resorption compared to minimal or delayed rehabilitation regimens.

Multi-scale characterization of the spatio-temporal interplay between elemental composition, mineral deposition and remodelling in bone fracture healing

Bone mineralization involves a complex orchestration of physico-chemical responses from the organism. Despite extensive studies, the detailed mechanisms of mineralization remain to be elucidated. This study aims to characterize bone mineralization using an in-vivo long bone fracture healing model in the rat. The spatio-temporal distribution of relevant elements was correlated to the deposition and maturation of hydroxyapatite and the presence of matrix remodeling compounds (MMP-13). Multi-scale measurements indicated that (i) zinc is required for both the initial mineral deposition and resorption processes during mature mineral remodeling; (ii) Zinc and MMP-13 show similar spatio-temporal trends during early mineralization; (iii) Iron acts locally and in coordination with zinc during mineralization, thus indicating novel evidence of the time-events and inter-play between the elements. These findings improve the understanding of bone mineralization by explaining the link between the different constituents of this process throughout the healing time. Statement of significanceBone mineralization involves a complex orchestration of physico-chemical responses from the organism, the detailed mechanisms of which remain to be elucidated. This study presents a highly novel multi-scale multi-modal investigation of bone mineralization using bone fracture healing as a model system. We present original characterization of tissue mineralization, where we relate the spatio-temporal distribution of important trace elements to a key matrix remodeling compound (MMP-13), the initial deposition and maturation of hydroxyapatite and further remodeling processes. This is the first time that mineralization has been probed down to the nanometric level, and where key mineralization components have been investigated to achieve a comprehensive and mechanistic understanding of the underlying mineralization processes during bone healing.

Titanium alloy cannulated screws and biodegrade ceramic nails for treatment of femoral neck fractures: A finite element analysis

BackgroundOur previous studies have demonstrated the mechanical effect of sclerosis around screw paths on the healing of femoral neck fractures (FNF) after internal fixation. Furthermore, we discussed the possibility of using bioceramic nails (BNs) to prevent sclerosis. However, all these studies were conducted under static conditions as the patient was standing on one leg, while the effect of the stress generated during movement is unknown. The purpose of this study was to evaluate the stress and displacement under dynamic stress loading conditions. MethodsTwo types of internal fixation, namely cannulated screws and bioceramic nails, were utilized in conjunction with various finite element models of the femur. These models included the femoral neck fracture healing model, the femoral neck fracture model, and the sclerosis around screws model. The resulting stress and displacement were analyzed by applying the contact forces associated with the most demanding activities during gait, including walking, standing, and knee bending. The present study establishes a comprehensive framework for investigating the biomechanical properties of internal fixation devices in the context of femoral fractures. ResultsThe stress at the top of the femoral head in the sclerotic model was increased by roughly 15 MPa during the knee bend and walking phases and by about 30 MPa during the standing phase compared to the healing model. The area of high stress at the top of the femoral head was increased during the sclerotic model's walking and standing phases. Additionally, the stress distribution throughout the dynamic gait cycle was comparable before and after the removal of internal fixations following the healing of the FNF. The overall stress distribution of the entire fractured femoral model was lower and more evenly distributed in all combinations of internal fixation. Furthermore, the internal fixation stress concentration was lower when more BNs were used. In the fractured model with three cannulated screws (CSs), however, the majority of the stress was concentrated around the ends of the fractures.The maximal stress in the healing model with one CS and two BNs was the highest at all stages of gait over three combinations of internal fixation, and the stress was mainly carried by CS. ConclusionsThe presence of sclerosis around screw paths increases the risk of femoral head necrosis. Removal of CS has little effect on the mechanics of the femur after healing of the FNF. BNs have several advantages over conventional CSs after FNF. Replacing all internal fixations with BNs after the healing of FNF may solve the problem of sclerosis formation around CSs to improve bone reconstruction owing to their bioactivity.

Computer-Based Mechanobiological Fracture Healing Model Predicts Non-Union of Surgically Treated Diaphyseal Femur Fractures.

As non-unions are still common, a predictive assessment of healing complications could enable immediate intervention before negative impacts for the patient occur. The aim of this pilot study was to predict consolidation with the help of a numerical simulation model. A total of 32 simulations of patients with closed diaphyseal femoral shaft fractures treated by intramedullary nailing (PFNA long, FRN, LFN, and DePuy Synthes) were performed by creating 3D volume models based on biplanar postoperative radiographs. An established fracture healing model, which describes the changes in tissue distribution at the fracture site, was used to predict the individual healing process based on the surgical treatment performed and full weight bearing. The assumed consolidation as well as the bridging dates were retrospectively correlated with the clinical and radiological healing processes. The simulation correctly predicted 23 uncomplicated healing fractures. Three patients showed healing potential according to the simulation, but clinically turned out to be non-unions. Four out of six non-unions were correctly detected as non-unions by the simulation, and two simulations were wrongfully diagnosed as non-unions. Further adjustments of the simulation algorithm for human fracture healing and a larger cohort are necessary. However, these first results show a promising approach towards an individualized prognosis of fracture healing based on biomechanical factors.