Dietary Fiber Fractions Research Articles

OSZACOWANIE ZAWARTOSCI GŁÓWNYCH SKŁADNIKÓW ODŻYWCZYCH W SUCHEJ KARMIE DLA PSÓW I ICH ZGODNOŚĆ Z WYTYCZNYMI ŻYWIENIOWYMI

The aim of this study was to estimate complete extruded dry food for adult dogs, with a particular focus on the nutritional value with respect to current nutritional guidelines for dogs, dietary fiber fractions, the division into breed size. Dog foods were subjected to chemical analyzes to determine the content of basic nutrients and dietary fiber fractions. The material for the research consisted of 15 maintenance foods for adult dogs (five for large breed dogs, five for small breed dogs and five for all breeds dogs). All analyzed feeds met the European Pet Food Industry Federation recommended minimum recommended levels of protein and fat. Individual tested foods were characterized by different levels of dietary fiber fractions, such as acid detergent fiber (ADF), cellulose (CEL), hemicellulose (HCEL). The group of foods for small breed dogs was characterized by the lowest mean of ME (391.23 kcal per 100 g DM). A higher level of ME (393.99 kcal per 100 g DM) was observed in the group of foods for dogs of large breeds, and the highest (397.05 kcal per 100 g DM) – in the group of foods for dogs of all breeds.

The Triple Jags of Dietary Fibers in Cereals: How Biotechnology Is Longing for High Fiber Grains.

Cereals represent an important source of beneficial compounds for human health, such as macro- and micronutrients, vitamins, and bioactive molecules. Generally, the consumption of whole-grain products is associated with significant health benefits, due to the elevated amount of dietary fiber (DF). However, the consumption of whole-grain foods is still modest compared to more refined products. In this sense, it is worth focusing on the increase of DF fractions inside the inner compartment of the seed, the endosperm, which represents the main part of the derived flour. The main components of the grain fiber are arabinoxylan (AX), β-glucan (βG), and resistant starch (RS). These three components are differently distributed in grains, however, all of them are represented in the endosperm. AX and βG, classified as non-starch polysaccharides (NSP), are in cell walls, whereas, RS is in the endosperm, being a starch fraction. As the chemical structure of DFs influences their digestibility, the identification of key actors involved in their metabolism can pave the way to improve their function in human health. Here, we reviewed the main achievements of plant biotechnologies in DFs manipulation in cereals, highlighting new genetic targets to be exploited, and main issues to face to increase the potential of cereals in fighting malnutrition.

Enzymatic-modified dietary fibre fraction extracted from potato residue regulates the gut microbiotas and production of short-chain fatty acids of C57BL/6 mice

Potato residue is a rich source of dietary fibre. Herein, the effects of unmodified and enzymes (cellulase and xylanase) modified potato residue dietary fibres on distribution of intestinal microbiotas and production of short-chain fatty acids (SCFAs) of C57BL/6 mice were evaluated. Results showed that enzymatic modification increased soluble dietary fibre content in potato residue. Administration of these dietary fibre promoted the production of acetic acid, n-butyric acid, iso-butyric acid, valeric acid, and iso-valeric acid, while inhibiting propionic acid content (p < 0.05). The potato residue dietary fibre improved the richness and diversity of intestinal microflora of mice, particularly increased Bacteroidetes to Firmicutes ratio (p < 0.05). Modification by cellulase and xylanase significantly improved the regulating bioactivities towards gut microbiota and increased values in food applications of potato residue dietary fibres. These dietary fibres have the potential to act as therapeutic agents to treat dysbiosis in the intestinal microbiota.

Effect of Coconut and Chestnut Flour Supplementations on Texture, Nutritional and Sensory Properties of Baked Wheat Based Bread.

Wheat bread, produced by the single-phase method, is a common food consumed all over the world. Due to changes in lifestyle and nutritional trends, alternative raw materials are sought to increase the nutritional value and improve the taste of daily consumed products. Additionally, customers seek a wide variety of foods, especially when it comes to basic foods. Nuts, such as coconuts or chestnuts, might provide an attractive flavour with benefits to the nutritional quality. In this study, the effect of substituting wheat flour with coconut or chestnut flour (flour contribution level: 5, 10, 15, 30, 50% w/w), was evaluated in terms of the breads specific volume, texture, colour, nutritional composition, and dietary fibre fraction contents. Moreover, a sensory evaluation was conducted to assess potential consumer acceptance. Based on the consumer’s perception, the overall acceptance of bread with 15% w/w of coconut and chestnut flour was in privilege compared to the control sample. As a result, taking all of the tested parameters into account, the breads with 5, 10, and 15% supplementation of chestnut or coconut flour were still of good quality compared to the wheat bread and their fibre content was significantly higher.

Coffee Silver Skin: Chemical Characterization with Special Consideration of Dietary Fiber and Heat-Induced Contaminants.

Coffee silver skin is produced in large amounts as a by-product during the coffee roasting process. In this study, coffee silver skin of the species Coffea arabica L. and Coffea canephora Pierre ex A. Froehner as well as silver skin pellets produced in the coffee industry were characterized with respect to both nutritional value and potential heat-induced contaminants. Enzymatic-gravimetric/chromatographic determination of the dietary fiber content showed values ranging from 59 to 67 g/100 g with a comparably high portion of soluble fiber, whereas low molecular weight soluble fiber was not detected. Compositional and methylation analysis indicated the presence of cellulose and xylans in the insoluble dietary fiber fraction, whereas pectic polysaccharides dominate the soluble dietary fiber fraction. The protein content as determined by the Kjeldahl method was in the range of 18 to 22 g/100 g, and all essential amino acids were present in coffee silver skin; whereas fat contents were low, high ash contents were determined. Elemental analysis by inductively coupled plasma mass spectrometry (ICP-MS) showed the presence of macroelements in large amounts, whereas toxic mineral elements were only detected in trace amounts or being absent. Acrylamide was quantified with levels of 24–161 µg/kg. Although 5-hydroxymethylfurfural was detected, its concentration was below the limit of determination. Furfuryl alcohol was not detected.

Effect of the Diets Supplemented with Artichoke and Shrimp by-Products on Obese Rats

Foods supplemented with functional fiber are an effective means for prevention of diseases like obesity, cardiovascular diseases, and diabetes mellitus. The objective of this study was to estimate the dietary fiber content in artichoke stems by-product powder (ASP) and shrimp by-product powder (SBP) and evaluate the protective effect of diet supplemented with their by-products as natural dietary fiber on weight gain, the blood picture, serum biochemical parameters and liver enzymes activities in obese rats. The results revealed that the crude fiber content was 22.68% in the ASP and 13.65% in SBP. Total dietary fiber fractions were composed of 18.69 and 0.42% soluble dietary fiber, 25.01 and 58.57% insoluble dietary fiber in defatted ASP and SBP, respectively. They also presented high amounts of inulin (18.2 g/100 g artichoke stem) and chitin (58.15 g/100 g shrimp shell). Biological impacts were done on the control group (CG) and compared with obese rat groups which were classified into seven groups; positive group (PC) and groups fed on diet supplemented with ASP and SBP at a level of 5 and 10%, inulin at dose 7.7 %, and chitosan at dose 2.6 %, for 8 weeks. The results showed significant improvement and ameliorated reduction in final body weight, body weights gain (%) and feed efficiency ratio (FER) in all the treated groups compared with the PC. Administration of 10% ASP or SBP significantly decreased body weight by 37.66 and 35.61%, respectively as compared to the high fat diet (HFD) group, while the highest reduction in body weight gain and lower FER were obtained in groups fed on chitosan. Feeding obese rats on diet containing ASP and SBP led to a reduction in the total cholesterol, triglycerides, and low-density lipoprotein cholesterol concentration, decreased in blood glucose level and improved serum liver enzymes activity and antioxidant enzyme activity as compared to the positive group. ASP as a source of inulin and SBP as a source of chitin can be used in the nutraceutical formulation of functional food products and a good source of natural dietary fiber to enhance the nutritional quality for prevention of diseases like obesity, and its associated health risks.

A descriptive chemical analysis of seaweeds, Ulva sp., Saccharina latissima and Ascophyllum nodosum harvested from Danish and Icelandic waters

This study aimed to discuss the chemical composition of three seaweed species commonly found in Nordic countries and its potential use in feed rations for pigs and calves. Two brown seaweeds Ascophyllum nodosum, Saccharina lastissima and a green seaweed Ulva sp. harvested from Danish and Icelandic waters were analyzed for proximate, amino acids, minerals, fatty acids and non-starch polysaccharides composition. All studied seaweeds contained low protein concentrations (i.e. 11.4–15.9 g/100 g DM). The ratio of essential amino acids (EAA) to non-essential amino acids (NEAA) was similar in all studied seaweeds (0.81−0.87). Ulva sp. had the highest ash concentration (48.2–54.4 g/100 g DM), followed by S. latissima (39.9 g/100 g DM) and A. nodosum (29.5 g/100 g DM). The most abundant macrominerals in the seaweeds were Ca, K and Na. Iodine was the most abundant micromineral in brown seaweeds (1.4–2.1 g/kg DM). Moreover, Ulva sp. had the highest Fe (5.1–8.0 g/kg DM), Mn (10.5 g/kg DM) and inorganic As (0.008 g/kg DM) concentrations. Ascophyllum nodosum had the highest crude fat concentration (3 g/100 g DM) and the highest concentration of polyunsaturated fatty acids (FAs) (37.9 g/100 g FA). Eicosapentaenoic acid (EPA) concentration was the highest in A. nodosum (7 g/100 g FA) followed by S. latissima (5 g/100 g FA) and Ulva sp. (2 g/100 g FA). Furthermore, concentration of α-linolenic acid, a precursor for EPA, was the highest in Ulva sp. (6.2–14.6 g/100 g FA). Total dietary fiber concentration was higher in the brown seaweeds (27.8–42.6 g/100 g DM) compared to the green seaweeds (17.9–21.5 g/100 g DM), where S. latissima had the highest soluble dietary fiber concentration. The high concentrations of ash and fiber may limit inclusion levels of the analyzed whole seaweeds in feed rations, mainly due to dilution of other nutrients in the feed, reduced digestibility of the feed and possible toxicities (i.e. high inorganic As). On the other hand, high concentrations of essential and valuable microminerals including I, Cu, Fe, Mn, Se were also detected in the studied seaweeds. High soluble dietary fiber concentration in S. latissima can be of interest as a fermentable substrate for probiotic bacteria. The easily digestible nutrients including, crude protein and fat were low in the seaweeds. However, the protein, fat, ash and dietary fiber fractions of the studied seaweeds were characterized by high concentrations of EAA, EFA, essential microminerals and interesting monomers of functional polysaccharides, respectively; which indicate possibilities for future use of seaweed-extracts in feed rations.

Valorisation of Sea Buckthorn Pomace by Optimization of Ultrasonic-Assisted Extraction of Soluble Dietary Fibre Using Response Surface Methodology.

Sea buckthorn pomace is a valuable industrial waste/by-product obtained after juice production that contains bioactive, health-promoting dietary fibres. This pomace finds usage as animal feed or simply discarded, owed to the lack of appropriate handling or processing facilities. The present study was aimed to evaluate the effects of green extraction technologies such as ultrasonic-assisted extraction on the yield of soluble dietary fibre (SDF) from sea buckthorn pomace. Response surface methodology (RSM) coupled with Box–Behnken design (BBD) was applied for optimization of SDF yield. The effects of sonication temperature (60–80 °C), sonication power (100–130 W) and extraction time (30–60 min) on the yield of SDF were also investigated. Furthermore, colour measurement and hydration properties of sea buckthorn pomace powder (STP) and dietary fibre fractions (SDF and insoluble dietary fibre, IDF) were also investigated. From the RSM results, the optimal sonication temperature (67.83 °C), sonication power (105.52 W) and extraction time (51.18 min) were identified. Based on this, the modified optimum conditions were standardised (sonication temperature of 70 °C, sonication power of 105 W and extraction time of 50 min). Accordingly, the yield of SDF obtained was 16.08 ± 0.18%, which was close to the predicted value (15.66%). Sonication temperature showed significant effects at p ≤ 0.01, while sonication power and extraction time showed significant effects at p ≤ 0.05 on the yield of SDF. The result on colour attributes of STP, SDF and IDF differed (L* (STP: 54.71 ± 0.72, IDF: 72.64 ± 0.21 and SDF: 54.53 ± 0.31), a* (STP: 52.35 ± 1.04, IDF: 32.85 ± 0.79 and SDF: 43.54 ± 0.03), b* (STP: 79.28 ± 0.62, IDF: 82.47 ± 0.19 and SDF: 71.33 ± 0.50), and ∆E* (STP: 79.93 ± 0.50, IDF: 74.18 ± 0.30 and SDF: 68.40 ± 0.39)). Higher values of hydration properties such as the water holding, swelling and oil holding capacities were found in SDF (7.25 ± 0.10 g g−1, 7.24 ± 0.05 mL g−1 and 1.49 ± 0.02 g g−1), followed by IDF (6.30 ± 0.02, 5.75 ± 0.07 and 1.25 ± 0.03) and STP (4.17 ± 0.04, 3.48 ± 0.06 and 0.89 ± 0.03), respectively. Based on our results, response surface methodology is recommended to be adopted to optimize the ultrasonic-assisted extraction to obtain maximum yield of SDF from sea buckthorn pomace. These results can be of practical usage while designing future functional food formulations using sea buckthorn pomace.

Red grape skin extract and oat \u03b2-glucan in shortbread cookies: technological and nutritional evaluation

Consumers are increasingly interested in innovative products enriched with nutrients that counteract the development of civilisation-associated diseases. Thus, the development of new functional nutrient-enriched food products that meet consumer needs is therefore necessary. The aims of this study were to develop a novel shortbread cookie product by addition of red grape skin extract and oat β-glucan and to evaluate the influence of these modifications on physico‐chemical properties and consumer’s acceptance. The red grape skin extract used in this product is a source of polyphenols which are beneficial for human health and extend product shelf life. β-glucan is a soluble fraction of dietary fibre that helps to lower reduce blood cholesterol and glycemic levels. The influence of grape skin extract, β-glucan and a combination of both on the β-glucan content, colour and texture parameters, thermal properties, total antioxidant activity, total phenolic content, volatile compounds profile and sensory properties of shortbread cookies was analysed. Product with modified formulations had higher total antioxidant activity, total phenolic content and were was more thermally stable than control samples. The obtained innovative functional products were characterized by an increased content of oat β-glucan, which is desirable from a nutritional point of view. The DSC measurements showed higher oxidative stability of cookies enriched with β-glucan and red grape skin extract. The additives caused significant changes in the colour and profile of volatile compounds of the finished final product but did not affect the sensory acceptance among consumers. The use of these additives represents a development in food technology that may be valuable in the food industry to increase the nutritional value and extend the shelf shelf-life of bakery products.

Wet milling of buckwheat cultivars and some quality properties of the fractions.

The hulled buckwheat cultivars (Aktaş cv. and Güneş cv.) were wet-milled, and then some chemical, yields, colour, functional properties, phenolic compound, antioxidant activity, and pasting, thermal and retrogradation properties of starches were investigated and compared with the wholegrain buckwheat flour (with hull) and buckwheat groat flour (without hull) of the same cultivars. Sodium dodecyl sulphate polyacrylamide gel electrophoresis patterns of flours and protein fractions were examined under reducing and non-reducing conditions. The hull, germ+dietary fibre, protein and starch fractions were collected. The total recovery for Aktaş cv. and Güneş cv. cultivars were 98.1% and 96.1%; total starch yields were 51.6% and 49.7%; pasting temperatures of the starches were found as 83.7 and 85.7°C; and final viscosities of starches were determined as 3.5 and 3.4 Pa·s, respectively. The resistant starch contents of starch fractions of Aktaş cv. ve Güneş cv. were found as 3.28% and 3.62%, respectively. The highest total phenolic compound contents were detected with dimethyl sulphoxide extraction in the germ+dietary fibre fractions. The highest 2,2-diphenyl-1-picrylhydrazyl radical scavenging activity and trolox equivalent antioxidant capacity were found in the hull fraction (as 81.7%) and germ+dietary fibre fraction (as 11.8 mmol/kg) of Aktaş cv. cultivar.

Dietary Fiber: Fractionation, Characterization and Potential Sources from Defatted Oilseeds.

Dietary fiber (DF) has wide applications, especially in the food and pharmaceutical industries due to its health-promoting effects and potential techno-functional properties in developing functional food products. There is a growing interest in studies related to DF; nevertheless, there is less focus on the fractionation and characterization of DF. The characteristics of DF fractions explain their functionality in food products and provide clues to their physiological effects in food and pharmaceutical industrial applications. The review focuses on a brief introduction to DF and methods for its fractionation. It discusses the characterization of DF in terms of structural, physicochemical and rheological properties. The potential sources of DF from selected defatted oilseeds for future studies are highlighted.

Structural characteristics and in vitro starch digestibility of pasta made with durum wheat semolina and chickpea flour

Chickpea flour contains large fractions of protein and dietary fiber, which offer benefits for human health. This work studied the characteristics and in vitro starch digestibility of pastas with blends of semolina and chickpea flour. Texture analysis showed that chickpea flour induced significant reductions in hardness and elasticity of cooked pasta. The addition of the chickpea increased protein solubility (150–200%). The accessible thiols showed a marked increase, indicating that the formation of a protein network relied on sulfhydryl crosslinking between proteins and other pasta components. FTIR analysis showed that the above characteristics may be linked to the secondary structure of proteins since chickpea tend to form structures with a high content of β-sheet configurations. The main advantage of using chickpea is in the in vitro digestibility since the effective starch content decreased from 74.67 ± 0.95 g/100 g for semolina pasta to 41.25 ± 1.17 g/100 g for chickpea pasta. The rapidly and slowly digestible starch fractions exhibited notable reductions of up 45%, which was attributed to the formation of complexes and to protective physical barriers of proteins on the starch granule. Non-conventional flours offer certain benefits for pasta formulations, but also certain challenges to stabilizing the pasta structure.

Particle size reduction along the digestive tract of fat sand rats (Psammomys obesus) fed four chenopods.

It is generally accepted that microbial digestion contributes little to digesta particle size reduction in herbivores, and that faecal particle size reflects mainly chewing efficiency, and may vary with diet. Nevertheless, a decrease in mean particle size (MPS) along the gastrointestinal tract (GIT) has been reported, especially in hindgut fermenters. However, to what degree the very fine particle fraction (non-food origin, especially microbes) affects MPS is unclear. Fat sand rats (Psammomys obesus, diurnal herbivores, n = 23, 175 ± sd 24g) consumed one of four chenopods (natural dietary items in the wild) for 30days. Digestibility was related negatively to dietary fibre content. We determined digesta MPS in the forestomach, glandular stomach, small intestine, caecum, colon and faeces by wet sieving, including (MPSfines) or excluding (MPSnofines) particles < 0.25mm. The proportions of fines were higher and of MPSfines were correspondingly lower in GIT sections that harbour microbes (forestomach, hindgut), whereas MPSnofines did not differ between forestomach and glandular stomach. However, MPSnofines decreased along the GIT, indicating MPS reduction due to digestive (enzymatic and microbial) processes. The four different diets led to different MPS, but the magnitude of MPS reduction in the GIT was not correlated with dietary fibre fractions or dry matter digestibility. These results indicate that within a species, MPS cannot be used as a proxy for diet quality or digestibility, and raise the hypothesis that MPS reduction along the GIT may be more pronounced in smaller than in larger mammalian terrestrial herbivores, possibly due to the fine initial particles produced by chewing in small species.

Extrusion Processing of Pure Chokeberry (Aronia melanocarpa) Pomace: Impact on Dietary Fiber Profile and Bioactive Compounds.

The partial substitution of starch with dietary fiber (DF) in extruded ready-to-eat texturized (RTE) cereals has been suggested as a strategy to reduce the high glycemic index of these food products. Here, we study the impact of extrusion processing on pure chokeberry (Aronia melanocarpa) pomace powder (CPP) rich in DF and polyphenols (PP) focusing on the content and profile of the DF fractions, stability of PP, and techno-functional properties of the extrudates. Using a co-rotating twin-screw extruder, different screw speeds were applied to CPP with different water contents (cw), which resulted in specific mechanical energies (SME) in the range of 145–222 Whkg−1 and material temperatures (TM) in the range of 123–155 °C. High molecular weight soluble DF contents slightly increase with increasing thermomechanical stress up to 16.1 ± 0.8 g/100 g dm as compared to CPP (11.5 ± 1.2 g/100 g dm), but total DF (TDF) contents (58.6 ± 0.8 g/100 g dm) did not change. DF structural analysis revealed extrusion-based changes in the portions of pectic polysaccharides (type I rhamnogalacturonan) in the soluble and insoluble DF fractions. Contents of thermolabile anthocyanins decrease linearly with SME and temperature from 1.80 ± 0.09 g/100 g dm in CPP to 0.24 ± 0.06 g/100 g dm (222 Whkg−1, 155 °C), but phenolic acids and flavonoids appear to be largely unaffected. Resulting techno-functional (water absorption and water solubility) and physical properties related to the sensory characteristics (expansion, hardness, and color) of pure CPP extrudates support the expectation that granulated CPP extrudates may be a suitable food ingredient rich in DF and PP.

Functionalization of Enzymatically Treated Apple Pomace from Juice Production by Extrusion Processing.

Food by-products can be used as natural and sustainable food ingredients. However, a modification is needed to improve the technofunctional properties according to the specific needs of designated applications. A lab-scale twin-screw extruder was used to process enzymatically treated apple pomace from commercial fruit juice production. To vary the range of the thermomechanical treatment, various screw speeds (200, 600, 1000 min−1), and screw configurations were applied to the raw material. Detailed chemical and functional analyses were performed to develop a comprehensive understanding of the impact of the extrusion processing on apple pomace composition and technofunctional properties as well as structures of individual polymers. Extrusion at moderate thermomechanical conditions increased the water absorption, swelling, and viscosity of the material. An increase in thermomechanical stress resulted in a higher water solubility index, but negatively affected the water absorption index, viscosity, and swelling. Scanning electron microscopy showed an extrusion-processing-related disruption of the cell wall. Dietary fiber analysis revealed an increase of soluble dietary fiber from 12.6 to 17.2 g/100 g dry matter at maximum thermo-mechanical treatment. Dietary fiber polysaccharide analysis demonstrated compositional changes, mainly in the insoluble dietary fiber fraction. In short, pectin polysaccharides seem to be susceptible to thermo-mechanical stress, especially arabinans as neutral side chains of rhamnogalacturonan I.

Effect of heat treatment on selected macronutrients in the wild harvested edible ground cricket, Henicus whellani Chopard

Globally, edible insects are increasingly being recognised as an alternative to animal protein source. However, the effect of heat-processing methods on the insects’ nutritional value has not been extensively studied for most edible insects. The effect of thermal processing on proximate and dietary fibre composition of the edible ground cricket, Henicus whellani Chopard, was investigated at different exposure periods for roasting and wet-heating (0, 15, 30 and 60 min); and for microwaving (2 and 5 min). Moisture, ash, crude fat and crude protein were determined using standard proximate analysis methods whilst dietary fibre fractions were determined using the enzymatic gravimetric method. Highest crude protein content (67.6%) was observed after microwaving for 5 min. Crude fat was highest (10.7%) after wet-heating at 95 °C for 60 min. The highest ash content (5.1%) was attained after wet-heating at 95 °C for 30 min. All thermal processes resulted in significant increase in soluble dietary fibre fractions. The highest soluble dietary fibre (5.78 g/100 g) was obtained after roasting for 60 min at 60 °C. Roasting at a lower temperature for shorter time (60 °C for 15 min) resulted in higher insoluble dietary fibre (8.70 g/100 g) than at a higher temperature and longer time (80 °C for 30 min)(3.72 g/100 g). The highest total dietary fibre (13.81 g/100 g) was obtained after roasting for 60 min at 60 °C while the lowest fibre level (4.66 g/100 g) was obtained after roasting for 30 min at 80 °C. Microwaving (for 5 min), wet-heating (95 °C for 60 min), wet-heating (95 °C for 30 min) and roasting (60 °C for 60 min) resulted in the highest retention of protein, fat, ash and total dietary fibre; respectively. The evaluated time-temperature combinations are recommended for insect processing to achieve protein, fat, ash and dietary fibre fractions suitable for human consumption.

Qualitative properties of cookies enriched with berries pomace

Abstract The purpose of this study was to investigate the qualitative properties of cookies with the addition of raspberry, red currants and strawberry pomace flour. Cookies were prepared by substitution of wheat flour with berry pomace flour (10%, 15% and 20%) and evaluated in terms of their proximate composition, physical characteristics, and functional and sensory properties. Berry pomace-supplemented cookies had significantly higher dietary fibre content and different fibre fractions NDF (neutral detergent fibre), ADF (acid detergent fibre), MADF (insoluble fibre fraction of modified acid detergent solution) as well as WSCs (water soluble carbohydrates) content. Correlation analysis results showed that cookie hardness was significantly correlated with dietary fibre content. The raspberry, red currant and strawberry flours contained 49.88%, 33.13% and 24.25% of dietary fibre, respectively. The colour of the cookies was measured using a Color Flex spectrophotometer. The average L*, a*, and b* values ranged from 37.35 to 68.29, from 7.08 to 13.18, and from 20.12 to 34.73, respectively.

PSXI-27 Chemical Composition and In Vitro Fermentation Characteristics of Legumes Using Canine Fecal Inoculum

Abstract Legumes are a popular grain-free alternative carbohydrate source in canine diets; however, information on fermentative characteristics of select legumes have not been established. Thus, the objectives of the present study were to quantify the chemical compositions and fermentative profile of select legumes using canine fecal inoculum. Five legume varieties, whole yellow peas (WYP), green lentils (GL), black bean grits, navy bean powder, and garbanzo beans, were analyzed and compared to a control, beet pulp (BP). Substrates were analyzed for gross energy (GE), dry and organic matter, crude protein (CP), acid hydrolyzed fat, and total dietary fiber fractions, beta-glucans, starch, free and hydrolyzed sugars, and fermentative characteristics: pH, short-chain fatty acids (SCFA), branched-chain fatty acids (BCFA), total gas, hydrogen, and methane. Substrates underwent a two-stage in vitro digestion and subsequent fermentation using canine fecal inoculum for 0, 3, 6, 9, and 12 h. Statistical significance was set at P ≤ 0.05. All test substrates contained approximately 8–9% moisture and 4.5 kcal/g GE. Crude protein concentrations of pulses ranged from 21–27%. Insoluble fiber values varied from 17–33%, with soluble fiber values ranging from 0–8%. Total starch content was greatest for GL (58%) and WYP (56%). Sucrose and stachyose were the most predominant free sugars and glucose was the most predominant hydrolyzed sugar among test substrates. Production of SCFA did not differ among substrates after 3 or 6 h of fermentation. BP and WYP had the greatest acetate (1,656 and 1,765 umol/g, respectively) and propionate production values (157.7 and 126.1 umol/g, respectively) after 9 h of in vitro fermentation. Pulses are good sources of dietary protein; however, they are also fiber-rich ingredients that appear to be slowly fermentable in vitro, which may have beneficial implications on the ratios of saccharolytic to proteolytic fermentation towards the distal colon in vivo.

Effect of sonication pretreatment on physicochemical, surface, thermal, and functional properties of fibro‐proteic extracts from male date palm flowers

This study aims to investigate the effect of the application of an ultrasound pretreatment on physicochemical, surface, thermal, and functional properties of two extracts from male date palm flowers. The obtained extracts were compared based on their structural and functional properties. It was proved that the application of sonication pretreatment has modified significantly (p < .05) the extract's characteristics. The protein yield, the essential amino acid content and the protein solubility were improved (29.61%, 29.22 g/100 g protein, and 91.1% for native sample against 35.26%, 41.04 g/100 g protein, and 100% for treated sample, respectively), while the protein content and the surfactant behavior at 1% were decreased due to the liberation of other compounds than protein. Moreover, the sonication has engendered some structural modifications such as the dissociation of some intermolecular bonds (FTIR) and the increase of crystalline region (X-ray), which influenced the protein unfolding and have led to the decrease of enthalpy (DSC) (272.2 against 228.6 J/g) and the decrease of water-holding capacity (11.62 against 9.51 g water/g of dry sample). Practical applications The male date palm flowers (MDPF) present a rich matrix composed mainly of dietary fiber, protein, and minerals. The protein fraction of MDPF was considered as an excellent source of amino acids supplying the human requirements. The dietary fiber fraction was composed essentially of insoluble dietary fibers which contribute to a balanced diet by creating satiety feeling and facilitating the intestinal transit. The fibro-proteic extract (FPE) of MDPF could be a potential functional ingredient for food applications. The physicochemical and functional properties of the FPE was changed by ultrasound pretreatment, which was beneficial to improve the protein yield, the amino acid profile, and the protein solubility. Nevertheless, both treated and non-treated samples showed promising nutritional and functional characteristics that could be used in the food industry to ameliorate food quality.

Chemical composition and in vitro fermentation characteristics of legumes using canine fecal inoculum.

Legumes are a popular grain-free alternative carbohydrate source in canine diets, however, information on their fermentative characteristics have not been established. Thus, the objectives of the present study were to 1) quantify the chemical compositions and 2) fermentative profile of select legumes using canine fecal inoculum. Five legume varieties, whole yellow peas (WYP), green lentils (GL), black bean grits (BBG), navy bean powder (NBP), and garbanzo beans, were analyzed and compared to a positive control, beet pulp (BP). Substrates were analyzed for gross energy (GE), dry and organic matter, crude protein (CP), acid hydrolyzed fat, and total dietary fiber (TDF) fractions, beta-glucans, starch-free, and hydrolyzed sugars, as well as fermentative characteristics: pH, short-chain fatty acids (SCFA), branched-chain fatty acids (BCFA), total gas, hydrogen, and methane. Substrates then underwent a two-stage in vitro digestion and subsequent fermentation using canine fecal inoculum for 0, 3, 6, 9, and 12 h. All test substrates contained approximately 8% to 9% moisture and 4.5 kcal/g GE. The highest CP content was observed in GL (27%). Analyzed TDF content of test substrates was greatest for WYP (32%) and GL (36%). Total starch content was greatest for GL (58%) and WYP (56%). Sucrose and stachyose were the most predominant free sugars and glucose was the most predominant hydrolyzed sugar among test substrates. After 3 and 6 h of fermentation, a net negative change in pH was observed among most substrates with a net negative change in all substrates after 9 and 12 h. Values for SCFA did not differ among substrates after 3 or 6 h of fermentation with BP and WYP among the greatest acetate (1,656 and 1,765 umol/g, respectively) and propionate production values (157.7 and 126.1, respectively) after 9 h. All substrates produced greater total gas volumes than WYP after 3 h, with no differences observed after any other time points. However, BP hydrogen production values were greater after 9 and 12 h (P < 0.0001; 726,042 and 394,675 ng/g, respectively) with greater methane production values after 12 h (P < 0.0001; 54,291 ng/g) than all test substrates. These data suggest that legumes offer a diverse macronutrient profile and appear to be a source of slowly fermentable fiber, which may have beneficial implications on the ratios of saccharolytic to proteolytic fermentation toward the distal colon.