Fourier Series Research Articles

A Fourier series model and parametric study for single person three-way continuous walking load

A Fourier series model and parametric study for single person three-way continuous walking load

Orthonormal rational functions on a semi-infinite interval

In this paper we propose a novel family of weighted orthonormal rational functions on a semi-infinite interval. We write a sequence of integer-coefficient polynomials in several forms and derive their corresponding differential equations. These equations do not form Sturm-Liouville problems. We overcome this disadvantage by multiplying some factors, resulting in a sequence of irrational functions. We deduce various generating functions of this sequence and find the associated Sturm-Liouville problems, which bring orthogonality. Then we establish a Hilbert space of functions defined on a semi-infinite interval with an inner product induced by a weight function determined by the Sturm-Liouville problems mentioned above. The even subsequence of the irrational function sequence above forms an orthonormal basis for this space. The Fourier expansions of some power functions are deduced. The sequence of non-positive integer power functions forms a non-orthogonal basis for this Hilbert space. We give two examples, one example of Fourier expansion and one example of interpolation as applications.

Poles, shocks, and tygers: The time-reversible Burgers equation.

We construct a formally time-reversible, one-dimensional forced Burgers equationby imposing a global constraint of energy conservation, wherein the constant viscosity is modified to a fluctuating state-dependent dissipation coefficient. The system exhibits dynamical properties which bear strong similarities with those observed for the Burgers equationand can be understood using the dynamics of the poles, shocks, and truncation effects, such as tygers. A complex interplay of these give rise to interesting statistical regimes ranging from hydrodynamic behavior to a completely thermalized warm phase. The end of the hydrodynamic regime is associated with the appearance of a shock in the solution and a continuous transition leading to a truncation-dependent state. Beyond this, the truncation effects such as tygers and the appearance of secondary discontinuity at the resonance point in the solution strongly influence the statistical properties. These disappear at the second transition, at which the global quantities exhibit a jump and attain values that are consistent with the establishment of a quasiequilibrium state characterized by energy equipartition among the Fourier modes. Our comparative analysis shows that the macroscopic statistical properties of the formally time-reversible system and the Burgers equationare equivalent in all the regimes, irrespective of the truncation effects, and this equivalence is not just limited to the hydrodynamic regime, thereby further strengthening the Gallavotti's equivalence conjecture. The properties of the system are further examined by inspecting the complex space singularities in the velocity field of the Burgers equation. Furthermore, an effective theory is proposed to describe the discontinuous transition.

The modeling method for vibration characteristics analysis of composite laminated rotationally stiffened shell.

The composite laminated rotationally stiffened shell is widely applied in aviation, aerospace, ship, machinery and other fields. To investigate the vibration characteristics of composite laminated rotationally stiffened shells with varying elastic boundary conditions, a modeling method of composite laminated rotationally stiffened shells is established. Firstly, the first-order shear deformation theory (FSDT) and the modified Fourier series method are effectively applied to establish the allowable displacement function of the composite laminated rotationally stiffened shell. Secondly, the energy function of composite laminated rotationally stiffened shell is established, and the simulation of complex elastic boundary and coupling boundary is realized by using artificial virtual spring technology. Thirdly, the Rayleigh-Ritz method is used to solve the energy function. Finally, the vibration characteristics of composite laminated rotationally stiffened shells are obtained and analyzed. In the analysis of numerical results, the fast and uniform convergence of analysis modeling and the accuracy of the calculated results are verified. On this basis, the effect of some important parameters such as thickness-to-radius ratio and length-to-radius ratio of shell, boundary spring stiffness values, cone apex angle, thickness and width of laminated beams, number of stiffeners on the vibration characteristics of composite laminated rotationally stiffened shell is studied. In theory, it makes up for the vibration characteristics analysis of composite laminated rotationally stiffened shells. In practical application, it guides the noise reduction design of related structures.

Absolute zeta functions arising from ceiling and floor Puiseux polynomials

For the [Formula: see text]-lift [Formula: see text] of a monoid scheme [Formula: see text] of finite type, Deitmar et al. calculated its absolute zeta function by interpolating [Formula: see text] for all prime powers [Formula: see text] using the Fourier expansion. This absolute zeta function coincides with the absolute zeta function of a certain polynomial. In this paper, we characterize the polynomial as a ceiling polynomial of the sequence [Formula: see text], which we introduce independently. Extending this idea, we introduce a certain pair of absolute zeta functions of a separated scheme [Formula: see text] of finite type over [Formula: see text] by means of a pair of Puiseux polynomials which estimate “[Formula: see text]” for sufficiently large [Formula: see text]. We call them the ceiling and floor Puiseux polynomials of [Formula: see text]. In particular, if [Formula: see text] is an elliptic curve, then our absolute zeta functions of [Formula: see text] do not depend on its isogeny class.

Non-polynomial zig-zag unified shear deformation formulation solved via boundary discontinuous method for laminated sandwich plates

Analytical solutions of mechanical problems with refined theories and challenge boundary conditions are still a topic of research due to intrinsic complexity. In this paper, a generalized refined theory is formulated to obtain analytical solutions for the static problem of cross-ply laminated and sandwich plates with several boundary conditions. These theories are implemented in the framework of the Carrera unified formulation (CUF) based on the equivalent-single-layer (ESL) approach. The displacement field of ESL-based models are expanded over the thickness direction by using non-polynomial terms, e.g. trigonometric, hyperbolic and the so-called zig-zag (ZZ) Murakami’s functions. The principle of virtual displacements (PVD) statement is used to derive the strong form of the governing equations in terms of displacements variables. These equations are solved by the boundary-discontinuous double Fourier series approach which provides highly accurate analytical solutions. This work gives a detailed comparison of results obtained using the presented ZZ models highlighting the differences with 3D FEM results. Furthermore, the influence of non-polynomial and ZZ terms in each ESL model is investigated. The superior robustness of the presented methodology compared to past works is demonstrated, making the proposed results suitable as a benchmark for validating new theories and finite elements. The findings can be also useful to train artificial intelligence (AI) models that can allow to the development of faster digital twin structure technology.

Comprehensive Characterisation of a Low-Frequency-Vibration Energy Harvester.

In this paper, we describe a measurement procedure to fully characterise a novel vibration energy harvester operating in the ultra-low-frequency range. The procedure, which is more thorough than those usually found in the literature, comprises three main stages: modelling, experimental characterisation and parameter identification. Modelling is accomplished in two alternative ways, a physical model (white box) and a mixed one (black box), which model the magnetic interaction via Fourier series. The experimental measurements include not only the input (acceleration)-output (energy) response but also the (internal) dynamic behaviour of the system, making use of a synchronised image processing and signal acquisition system. The identification procedure, based on maximum likelihood, estimates all the relevant parameters to characterise the system to simulate its behaviour and helps to optimise its performance. While the method is custom-designed for a particular harvester, the comprehensive approach and most of its procedures can be applied to similar harvesters.

Calibration Optimization of Kinematics and Dynamics for Delta Robot Driven by Integrated Joints in Machining Task

For the application of Delta robots with a 3-R(RPaR) configuration in machining tasks, this paper constructed a 54-parameter kinematic error model and a simplified dynamic model incorporating an integrated joint’s position error and friction, respectively. Utilizing Singular Value Decomposition (SVD) of the Linear Model Coefficient Matrix (LMCM) and the coefficient chart, a criterion for identifiability of error components is established. For good identification results, the optimal measurement surface with Fourier series form is obtained using a combination of the Hook–Jeeves Direct Search Algorithm (DSA) and Inner Point Method (IPM). The friction coefficients and other dynamic parameters are obtained through fitting the integrated joint torque-angle pairs measured along specific trajectories using nonlinear least squares regression. The validation of the calibration process is conducted through simulations and experiments. The calibration results provide a foundation for the precise control of integrated joints and the high-precision motion of robots.

POLYNOMIAL SOLUTIONS FOR THE KOLMOGOROV–WIENER PREDICTION OF MODELED SMOOTHED HEAVY-TAIL PROCESS

Nowadays telecommunication traffic in systems with data packet transfer is considered as a heavy-tail random process. In a couple of rather simple models traffic is considered to be stationary one. In our recent papers we generated modeled heavy-tail data, which is based on the smoothing of the fractional Gaussian noise. In particular, the applicability if the continuous Kolmogorov–Wiener filter to the prediction of such data was investigated, the corresponding Wiener–Hopf integral equation was solved on the basis of the truncated Walsh function expansion. However, a question occurs – may another truncated orthogonal function expansion be applied to the problem under consideration? So, the corresponding investigation may be an actual question. In our recent papers we investigated theoretical fundamentals of the Kolmogorov–Wiener filter construction for different models, in particular, on the basis of the truncated polynomial expansion method and on the basis of the truncated trigonometric Fourier series expansion method. In this paper we restrict ourselves to the investigation of the applicability of the truncated polynomial expansion method to the problem under consideration, the corresponding method is based on the Сhebyshev polynomials of the first kind. The applicability of another polynomial or trigonometric expansions to the problem under consideration may be discussed in other papers. The aim of the work is to investigate the applicability of the Galerkin method based on the Chebyshev polynomials of the first kind to the Kolmogorov–Wiener prediction of smoothed heavy-tail data. The methodology consists in the solving of the Wiener–Hopf integral equation on the basis of the truncated polynomial expansion method which is based on the Chebyshev polynomials of the first kind. The scientific novelty consists in the proof of the fact that the Galerkin method based on the Chebyshev polynomials of the first kind may be applied to the Kolmogorov–Wiener prediction of smoothed heavy-tail data. The conclusions are as follows. The truncated polynomial expansion method based on the Chebyshev polynomials of the first kind may give reliable results in the framework of the Kolmogorov–Wiener prediction of smoothed heavy-tail data.

Price Prediction of Staples with Simultaneous Fourier Series Estimator as a Contribution to Solve the National Food Problem

This study provides an overview related to the prediction of prices for staples that are widely consumed by the Indonesian people and often experience price fluctuations at certain times, namely cooking oil, chili, and chicken eggs. Based on the Market Monitoring System and Staples of the Ministry of Trade, the national average price of cooking oil as of January 3, 2022, reached USD 1.17per liter. The average price of chicken eggs reached USD 1,98 per kilogram, an increase of 20.16% at the same time. In addition, based on the National Strategic Food Price Information Center, the average price of chili in traditional markets throughout the province rose by USD 0.19 or about 3.16% and reached USD 6.29 per kilogram. The prediction of staple food prices in this study was formed using a nonparametric regression model of the Fourier series estimator. This regression model has high flexibility in forming the model and estimating the fluctuation data pattern, which is not known in the form of time-series data. The data in this study is sourced from the National Strategic Food Price Information Center website with the response variables used being the daily prices of cooking oil, chicken eggs, and chili from September 1, 2021, to December 31, 2021, as training data. In addition, the same commodity data from January 1, 2022, to January 10, 2022, is used as testing data. The best model from the estimation results with the Fourier series is a model with an oscillation parameter of 25 which contains a sine cosine basis with a coefficient of determination of 83.05%and an MSE value of 1.628. The selected model also has a very good performance predicting the prices of the three staples with a MAPE value of 1.082%.

Analytic solution for two dimensional beam problems: Pure displacement boundary conditions

The present manuscript delineates the derivation of strong solutions for the linear elasticity problem in a two dimensional rectangular beam. The materials under consideration can exhibit either isotropic or orthotropic properties. Additionally, the analysis is not restricted to slender beams because the ratio between the length and the height of the beam can be arbitrary. The boundary conditions fall into the Dirichlet category, implying that both horizontal and vertical displacements are specified on all four surfaces. The sole requirement is that these surface displacements are continuous functions, although they may not necessarily be smooth. Since the displacements at the surfaces can be arbitrary, there is no need to consider approximations, such as those concerning local (small) boundaries in slender beams. Nonetheless, it is demonstrated that an equivalent principle to the Saint-Venant principle exists for pure displacement boundary conditions. The partial differential equations are solved through the separation of variables method, leading to the identification of two solution types, encompassing both cosine and sine Fourier series. Particular emphasis is placed on evaluating the convergence of these solutions. For two distinct and general examples, it is confirmed that the solutions indeed exist.

Exponential expansions for approximation of probability distributions

AbstractThis work analyses expansions of exponential form for approximating probability density functions, through the utilization of diverse orthogonal polynomial bases. Notably, exponential expansions ensure the maintenance of positive probabilities regardless of the degree of skewness and kurtosis inherent in the true density function. In particular, we introduce novel findings concerning the convergence of this series towards the true density function, employing mathematical tools of functional statistics. In particular, we show that the exponential expansion is a Fourier series of the true probability with respect to a given orthonormal basis of the so called Bayesian Hilbert space. Furthermore, we present a numerical technique for estimating the coefficients of the expansion, based on the first n exact moments of the corresponding true distribution. Finally, we provide numerical examples that effectively demonstrate the efficiency and straightforward implementability of our proposed approach.

Efficient by Precision Algorithms for Approximating Functions from Some Classes by Fourier Series

Efficient by Precision Algorithms for Approximating Functions from Some Classes by Fourier Series

Signal Decomposition for Monitoring Systems of Processes

This article is devoted to the problem of signal decomposition into periodic and aperiodic components. According to the proposed approach, there is no need to evaluate the aperiodic component as a difference between the total signal of its periodic components. This research aims to create a general analytical approach that combines the Fourier and Maclaurin series methodologies into a single comprehensive series. As a result, analytical expressions for determining deposition coefficients were established for an aperiodic signal with a monoharmonic overlay. Recurrence relations were established to determine the coefficients of this series. These relations allow direct integrations of the obtained values of integrals to be avoided. The evaluated numerical values of the coefficients are also presented graphically and tabulated. It was proven that the values of these coefficients are universal numbers since they do not depend on the period/frequency of oscillations. The reliability of the proposed approach was confirmed by the fact that the evaluated coefficients are equal to the Fourier series coefficients in the case of a periodic signal. Also, for an aperiodic signal, these coefficients were reduced to the coefficients of the Maclaurin series. The usability of the proposed generalized analytical approach for signal decomposition is for control and monitoring systems of processes.

Radial behavior of Mahler functions

Many papers have been recently devoted to the study of the radial behavior as [Formula: see text] of transcendental r-Mahler functions holomorphic in the open unit disk. In particular, Bell and Coons showed in 2017 that, in a generic sense, r-Mahler functions behave like [Formula: see text] for some [Formula: see text] and [Formula: see text] is a real analytic function of [Formula: see text] such that [Formula: see text]. They did not provide a formula for [Formula: see text] which was made explicit only in a few examples of r-Mahler functions of orders 1 and 2, and for specific values of r. In this paper, we first provide an explicit expression of [Formula: see text] as an exponential of a Fourier series in the variable [Formula: see text] for every r-Mahler function of order 1. Then, extending to a large setting a method introduced by Brent–Coons–Zudilin in 2016 to compute [Formula: see text] associated to the Dilcher–Stolarsky function (a 4-Mahler function of order 2 in [Formula: see text]), we provide an explicit expression of [Formula: see text] for every r-Mahler function of order 2 under mild assumptions on the coefficients in [Formula: see text] of the underlying r-Mahler equations. This applies in particular to the generating function of the Baum–Sweet sequence. We do the same for r-Mahler functions solutions of inhomogeneous Mahler equations of order 1.

Vibration of embedded restrained composite tube shafts with nonlocal and strain gradient effects

Torsional vibration response of a circular nanoshaft, which is restrained by the means of elastic springs at both ends, is a matter of great concern in the field of nano-/micromechanics. Hence, the complexities arising from the deformable boundary conditions present a formidable obstacle to the attainment of closed-form solutions. In this study, a general method is presented to calculate the torsional vibration frequencies of functionally graded porous tube nanoshafts under both deformable and rigid boundary conditions. Classical continuum theory, upgraded with nonlocal strain gradient elasticity theory, is employed to reformulate the partial differential equation of the nanoshaft. First, torsional vibration equation based on the nonlocal strain gradient theory is derived for functionally graded porous nanoshaft embedded in an elastic media via Hamilton’s principle. The ordinary differential equation is found by discretizing the partial differential equation with the separation of variables method. Then, Fourier sine series is used as the rotation function. The necessary Stokes' transformation is applied to establish the general eigenvalue problem including the different parameters. For the first time in the literature, a solution that can analyze the torsional vibration frequencies of functionally graded porous tube shafts embedded in an elastic media under general (elastic and rigid) boundary conditions on the basis of nonlocal strain gradient theory is presented in this study. The results obtained show that while the increase in the material length scale parameter, elastic media and spring stiffnesses increase the frequencies of nanoshafts, the increase in the nonlocal parameter and functionally grading index values decreases the frequencies of nanoshafts. The detailed effects of these parameters are discussed in the article.

Riesz–Zygmund means and trigonometric approximation in Morrey spaces

Riesz–Zygmund means and trigonometric approximation in Morrey spaces

Linear analytical model for the seismic response of a straight‐jointed shield tunnel

AbstractIn this study, the segment joint and ring joint of the lining of the straight‐jointed tunnel are simplified as an equivalent open cylindrical shell with a small central angle and an equivalent closed cylindrical shell with a small width, and the lining of the straight‐jointed tunnel is thus simplified as an equivalent continuous periodic shell (ECPS) described by the cylindrical shell theory. Since the ECPS lining is periodic along the longitudinal direction, the tunnel‐soil system can thus be treated as a periodic system, which is referred to as the periodic tunnel‐soil system (PTSS) in this study. Based on the proposed ECPS lining model, an analytical method for the tunnel with the ECPS lining (ECPS tunnel) under seismic waves is established in this study. By employing the periodicity condition for the PTSS as well as the wave function expansion method, the representation for the wave field in the soil is established. With the aforementioned cylindrical shell theory and Fourier series expansion method, the convolution type constitutive relation for the ECPS lining and the Fourier space equations of motion are derived. By using the soil‐lining continuity condition and aforementioned formulations for the ECPS lining and soil, the coupled Fourier space equations of motion for the PTSS are established, with which the response of the ECPS lining and scattered waves in the soil can be determined.

Free and Forced Vibration Analysis of Carbon/Glass Hybrid Composite Laminated Plates Under Arbitrary Boundary Conditions

This paper presents the theoretical investigations on the free and forced vibration behaviours of carbon/glass hybrid composite laminated plates with arbitrary boundary conditions. The unknown allowable displacement functions of the physical middle surface are expressed in terms of standard cosine Fourier series and sinusoidal auxiliary functions to ensure the continuity of the displacement functions and their derivatives at the structural boundaries. Arbitrary boundary conditions are achieved through the introduction of an artificial spring technique. The first shear deformation theory and Lagrange equations are utilized to derive the energy expression, and the eigenvalue equations associated with free and forced vibration are obtained by Rayleigh-Ritz variational operations. Subsequently, these equations are then solved to determine the natural frequency, mode of vibration, and the steady-state displacement response under forced excitation. The new results are compared with those from references and finite element methods to verify the convergence, accuracy and efficiency of the analytical method. The effects of hybrid ratios, stacking sequences, lamination schemes, fibre orientation, boundary conditions and excitation force on the free and forced vibration behaviours of the carbon/glass hybrid composite laminated plates are analyzed in detail.

Period-1 Motions and Bifurcations of a 3D Brushless DC Motor System with Voltage Disturbance

Abstract: In this paper, the nonlinear dynamic system of a brushless DC motor with voltage disturbance is studied analytically via a generalized harmonic balance method. A truncated Fourier series with time-varying coefficients is utilized to represent the analytical variations of nonlinear currents and voltages within this dynamic system. Bifurcations of periodic currents and voltages are obtained, and their stability is discussed through eigenvalue analysis. The frequency–amplitude characteristics of periodic currents and voltages exhibit complexity in the frequency domain. Comparative illustrations are provided to contrast the analytical solutions with numerical outcomes for periodic currents and voltages. These analytical findings can be effectively employed for controlling the brushless DC motors experiencing voltage disturbances.