Four-way Junction Research Articles

A critical role in structure-specific DNA binding for the acetylatable lysine residues in HMGB1

The structure-specific DNA-binding protein HMGB1 (high-mobility group protein B1) which comprises two tandem HMG boxes (A and B) and an acidic C-terminal tail, is acetylated in vivo at Lys(2) and Lys(11) in the A box. Mutation to alanine of both residues in the isolated A domain, which has a strong preference for pre-bent DNA, abolishes binding to four-way junctions and 88 bp DNA minicircles. The same mutations in full-length HMGB1 also abolish its binding to four-way junctions, and binding to minicircles is substantially impaired. In contrast, when the acidic tail is absent (AB di-domain) there is little effect of the double mutation on four-way junction binding, although binding to minicircles is reduced approximately 15-fold. Therefore it appears that in AB the B domain is able to substitute for the non-functional A domain, whereas in full-length HMGB1 the B domain is masked by the acidic tail. In no case does single substitution of Lys(2) or Lys(11) abolish DNA binding. The double mutation does not significantly perturb the structure of the A domain. We conclude that Lys(2) and Lys(11) are critical for binding of the isolated A domain and HMGB1 to distorted DNA substrates.

FANCM of the Fanconi anemia core complex is required for both monoubiquitination and DNA repair

In response to DNA damage, the Fanconi anemia (FA) core complex functions as a signaling machine for monoubiquitination of FANCD2 and FANCI. It remains unclear whether this complex can also participate in subsequent DNA repair. We have shown previously that the FANCM constituent of the complex contains a highly conserved helicase domain and an associated ATP-dependent DNA translocase activity. Here we show that FANCM also possesses an ATP-independent binding activity and an ATP-dependent bi-directional branch-point translocation activity on a synthetic four-way junction DNA, which mimics intermediates generated during homologous recombination or at stalled replication forks. Using an siRNA-based complementation system, we found that the ATP-dependent activities of FANCM are required for cellular resistance to a DNA-crosslinking drug, mitomycin C, but not for the monoubiquitination of FANCD2 and FANCI. In contrast, monoubiquitination requires the entire helicase domain of FANCM, which has both ATP dependent and independent activities. These data are consistent with participation of FANCM and its associated FA core complex in the FA pathway at both signaling through monoubiquitination and the ensuing DNA repair.

Analysis of branched nucleic acid structure using comparative gel electrophoresis

Electrophoresis in polyacrylamide gels provides a simple yet powerful means of analyzing the relative disposition of helical arms in branched nucleic acids. The electrophoretic mobility of DNA or RNA with a central discontinuity is determined by the angle subtended between the arms radiating from the branchpoint. In a multi-helical branchpoint, comparative gel electrophoresis can provide a relative measure of all the inter-helical angles and thus the shape and symmetry of the molecule. Using the long-short arm approach, the electrophoretic mobility of all the species with two helical arms that are longer than all others is compared. This can be done as a function of conditions, allowing the analysis of ion-dependent folding of branched DNA and RNA species. Notable successes for the technique include the four-way (Holliday) junction in DNA and helical junctions in functionally significant RNA species such as ribozymes. Many of these structures have subsequently been proved correct by crystallography or other methods, up to 10 years later in the case of the Holliday junction. Just as important, the technique has not failed to date. Comparative gel electrophoresis can provide a window on both fast and slow conformational equilibria such as conformer exchange in four-way DNA junctions. But perhaps the biggest test of the approach has been to deduce the structures of complexes of four-way DNA junctions with proteins. Two recent crystallographic structures show that the global structures were correctly deduced by electrophoresis, proving the worth of the method even in these rather complex systems. Comparative gel electrophoresis is a robust method for the analysis of branched nucleic acids and their complexes.

Folding of the SAM Aptamer is Determined by the Formation of a K-turn-dependent Pseudoknot

The S-adenosylmethionine (SAM) riboswitch is one of the most recurrent riboswitches found in bacteria and has three known different natural aptamers. The Bacillus subtilis yitJ SAM riboswitch aptamer is organized around a four-way junction which is characterized by the presence of a pseudoknot and a K-turn motif. By replacing the adenine involved in a Watson-Crick base pair at position 138 in the core region of the aptamer with the fluorescent analogue 2-aminopurine (2AP), we show that the ligand-induced reorganization of the aptamer strongly attenuates 2AP fluorescence. The fluorescence quenching process is specific to SAM on the basis of the observation that the structural analogue S-adenosylhomocysteine does not promote a similar effect. We find that the pseudoknot is important for the reorganization of the core domain and that the K-turn motif also has a marked influence on the core domain reorganization, most probably through its important role in pseudoknot formation. Finally, we show that SAM riboswitch ligand binding is facilitated by the L7Ae K-turn binding protein, which suggests that K-turn motifs may be protein anchor sites used by riboswitches to promote RNA folding.

Molecular Scale Architecture: Engineered Three- And Four-Way Junctions

Biomolecular self-assembly provides a basis for the bottom-up construction of useful and diverse nanoscale architectures. DNA is commonly used to create these assemblies and is often exploited as a lattice or an array. Although geometrically rigid and highly predictable, these sheets of repetitive constructs often lack the ability to be enzymatically manipulated or elongated by standard biochemical techniques. Here, we describe two approaches for the construction of position-controlled, molecular-scale, discrete, three- and four-way DNA junctions. The first approach for constructing these junctions relies on the use of nonmigrating cruciforms generated from synthetic oligonucleotides to which large, biologically generated, double-stranded DNA segments are enzymatically ligated. The second approach utilitizes the DNA methyltransferase-based SMILing (sequence-specific methyltransferase-induced labeling of DNA) method to site-specifically incorporate a biotin within biologically derived DNA. Streptavidin is then used to form junctions between unique DNA strands. The resultant assemblies have precise and predetermined connections with lengths that can be varied by enzymatic or hybridization techniques, or geometrically controlled with standard DNA functionalization methods. These junctions are positioned with single nucleotide resolution on large, micrometer-length templates. Both approaches generate DNA assemblies which are fully compatible with standard recombinant methods and thus provide a novel basis for nanoengineering applications.

The structural basis of Holliday junction resolution by T7 endonuclease I

The four-way (Holliday) DNA junction is the central intermediate in homologous recombination, a ubiquitous process that is important in DNA repair and generation of genetic diversity. The penultimate stage of recombination requires resolution of the DNA junction into nicked-duplex species by the action of a junction-resolving enzyme, examples of which have been identified in a wide variety of organisms. These enzymes are nucleases that are highly selective for the structure of branched DNA. The mechanism of this selectivity has, however, been unclear in the absence of structural data. Here we present the crystal structure of the junction-resolving enzyme phage T7 endonuclease I in complex with a synthetic four-way DNA junction. Although the enzyme is structure-selective, significant induced fit occurs in the interaction, with changes in the structure of both the protein and the junction. The dimeric enzyme presents two binding channels that contact the backbones of the junction's helical arms over seven nucleotides. These interactions effectively measure the relative orientations and positions of the arms of the junction, thereby ensuring that binding is selective for branched DNA that can achieve this geometry.

Crystal structure of T4 endonuclease VII resolving a Holliday junction

Holliday proposed a four-way DNA junction as an intermediate in homologous recombination, and such Holliday junctions have since been identified as a central component in DNA recombination and repair. Phage T4 endonuclease VII (endo VII) was the first enzyme shown to resolve Holliday junctions into duplex DNAs by introducing symmetrical nicks in equivalent strands. Several Holliday junction resolvases have since been characterized, but an atomic structure of a resolvase complex with a Holliday junction remained elusive. Here we report the crystal structure of an inactive T4 endo VII(N62D) complexed with an immobile four-way junction with alternating arm lengths of 10 and 14 base pairs. The junction is a hybrid of the conventional square-planar and stacked-X conformation. Endo VII protrudes into the junction point from the minor groove side, opening it to a 14 A x 32 A parallelogram. This interaction interrupts the coaxial stacking, yet every base pair surrounding the junction remains intact. Additional interactions involve the positively charged protein and DNA phosphate backbones. Each scissile phosphate that is two base pairs from the crossover interacts with a Mg2+ ion in the active site. The similar overall shape and surface charge potential of the Holliday junction resolvases endo VII, RuvC, Ydc2, Hjc and RecU, despite having different folds, active site composition and DNA sequence preference, suggest a conserved binding mode for Holliday junctions.

Dissecting the multistep reaction pathway of an RNA enzyme by single-molecule kinetic "fingerprinting".

Single-molecule FRET is a powerful tool for probing the kinetic mechanism of a complex enzymatic reaction. However, not every reaction intermediate can be identified via a distinct FRET value, making it difficult to fully dissect a multistep reaction pathway. Here, we demonstrate a method using sequential kinetic experiments to differentiate each reaction intermediate by a distinct time sequence of FRET signal (a kinetic "fingerprint"). Our model system, the two-way junction hairpin ribozyme, catalyzes a multistep reversible RNA cleavage reaction, which comprises two structural transition steps (docking/undocking) and one chemical reaction step (cleavage/ligation). Whereas the docked and undocked forms of the enzyme display distinct FRET values, the cleaved and ligated forms do not. To overcome this difficulty, we used Mg(2+) pulse-chase experiments to differentiate each reaction intermediate by a distinct kinetic fingerprint at the single-molecule level. This method allowed us to unambiguously determine the rate constant of each reaction step and fully characterize the reaction pathway by using the chemically competent enzyme-substrate complex. We found that the ligated form of the enzyme highly favors the docked state, whereas undocking becomes accelerated upon cleavage by two orders of magnitude, a result different from that obtained with chemically blocked substrate and product analogs. The overall cleavage reaction is rate-limited by the docking/undocking kinetics and the internal cleavage/ligation equilibrium, contrasting the rate-limiting mechanism of the four-way junction ribozyme. These results underscore the kinetic interdependence of reversible steps on an enzymatic reaction pathway and demonstrate a potentially general route to dissect them.

A posteriori design of crystal contacts to improve the X-ray diffraction properties of a small RNA enzyme.

The hairpin ribozyme is a small catalytic RNA comprising two helix-loop-helix domains linked by a four-way helical junction (4WJ). In its most basic form, each domain can be formed independently and reconstituted without a 4WJ to yield an active enzyme. The production of such minimal junctionless hairpin ribozymes is achievable by chemical synthesis, which has allowed structures to be determined for numerous nucleotide variants. However, abasic and other destabilizing core modifications hinder crystallization. This investigation describes the use of a dangling 5'-U to form an intermolecular U.U mismatch, as well as the use of synthetic linkers to tether the loop A and B domains, including (i) a three-carbon propyl linker (C3L) and (ii) a nine-atom triethylene glycol linker (S9L). Both linker constructs demonstrated similar enzymatic activity, but S9L constructs yielded crystals that diffracted to 2.65 A resolution or better. In contrast, C3L variants diffracted to 3.35 A and exhibited a 15 A expansion of the c axis. Crystal packing of the C3L construct showed a paucity of 6(1) contacts, which comprise numerous backbone to 2'-OH hydrogen bonds in junctionless and S9L complexes. Significantly, the crystal packing in minimal structures mimics stabilizing features observed in the 4WJ hairpin ribozyme structure. The results demonstrate how knowledge-based design can be used to improve diffraction and overcome otherwise destabilizing defects.

Control and Regulation of KplE1 Prophage Site-specific Recombination

KplE1 is one of the 10 prophage regions of Escherichia coli K12, located at 2464 kb on the chromosome. KplE1 is defective for lysis, but it is fully competent for excisive recombination. In this study, we have mapped the binding sites of the recombination proteins, namely IntS, TorI, and IHF on attL and attR, and the organization of these sites suggests that the intasome is architecturally different from the lambda canonical form. We also measured the relative contribution of these proteins to both excisive and integrative recombination by using a quantitative in vitro assay. These experiments show a requirement of the TorI excisionase for excisive recombination and of the IntS integrase for both integration and excision. Moreover, we observed a strong influence of the supercoiled state of the substrates. The KplE1 recombination module, composed of the integrase and excisionase genes together with the attL and attR DNA regions, is highly similar to that of several phages infecting various E. coli strains as well as Shigella flexneri and Shigella sonnei. The in vitro recombination data reveal that HK620 and KplE1 att sequences are exchangeable. This study thus defines a new site-specific recombination module, and implications for the mechanism and regulation of recombination are discussed.

The HMGB1 acidic tail regulates HMGB1 DNA binding specificity by a unique mechanism

HMGB1 is a conserved chromosomal protein composed of two DNA-binding domains and an acidic C-terminal tail. There were evidences suggesting that the C-terminal tail contributed to the DNA binding specificity of the N-terminal DNA-binding domains. However, the mechanism underlining this observation is largely unknown. Our data first confirmed the previous study with NMR that showed a direct interaction between HMGB1’s C-terminal tail and its N-terminal domains. We further demonstrated that this interaction can be competed more efficiently by a DNA with four-way junction structure than by a linear double-stranded DNA. Mutations within the N-terminal region, that disrupt its binding to the C-terminal tail, abolished HMGB1’s ability to distinguish the linear DNA and the four-way junction DNA. Those data suggested a unique mechanism designed by nature that utilizes a protein’s negatively charged C-terminal tail to enhance its DNA-binding domain’s specificity to certain structured DNAs.

Ligand Bridging of the DNA Holliday Junction: Molecular Recognition of a Stacked‐X Four‐Way Junction by a Small Molecule

Planning a Holliday: A new mode of binding to a stacked-X, four-way Holliday junction is described in which a chromophore molecule binds across the center of the junction and two adenine residues are replaced by the acridine chromophores at either side of the crossover. This binding mode is specific for the Holliday junction and does not cause unwinding of the DNA helices.

Use of a novel Forster resonance energy transfer method to identify locations of site-bound metal ions in the U2-U6 snRNA complex

U2 and U6 snRNAs pair to form a phylogenetically conserved complex at the catalytic core of the spliceosome. Interactions with divalent metal ions, particularly Mg(II), at specific sites are essential for its folding and catalytic activity. We used a novel Förster resonance energy transfer (FRET) method between site-bound luminescent lanthanide ions and a covalently attached fluorescent dye, combined with supporting stoichiometric and mutational studies, to determine locations of site-bound Tb(III) within the human U2–U6 complex. At pH 7.2, we detected three metal-ion-binding sites in: (1) the consensus ACACAGA sequence, which forms the internal loop between helices I and III; (2) the four-way junction, which contains the conserved AGC triad; and (3) the internal loop of the U6 intra-molecular stem loop (ISL). Binding at each of these sites is supported by previous phosphorothioate substitution studies and, in the case of the ISL site, by NMR. Binding of Tb(III) at the four-way junction and the ISL sites was found to be pH-dependent, with no ion binding observed below pH 6 and 7, respectively. This pH dependence of metal ion binding suggests that the local environment may play a role in the binding of metal ions, which may impact on splicing activity.

Does topoisomerase II specifically recognize and cleave hairpins, cruciforms and crossovers of DNA?

DNA topoisomerase II is an enzyme that specializes in DNA disentanglement. It catalyzes the interconversion of DNA between different topological states. This event requires the passage of one duplex through another one via a transient double-strand break. Topoisomerase II is able to process any type of DNA, including structures such as DNA juxtapositions (crossovers), DNA hairpins or cruciforms, which are recognized with high specificity. In this review, we focused our attention on topoisomerase II recognizing DNA substrates that possess particular geometries. A strong cleavage site, as we identified in pBR322 DNA in the presence of ellipticine (site 22), appears to be characterized by a cruciform structure formed from two stable hairpins. The same sequence could also constitute a four-way junction structure stabilized by interactions involving ATC sequences. The latter have been shown to be able to promote Holliday junctions. We reviewed the recent literature that deals with the preferential recognition of crossovers by various topoisomerases. The single molecule relaxation experiments have demonstrated the differential abilities of the topoisomerases to recognize crossovers. It appears that enzymes, which distinguish the chirality of the crossovers, possess specialized domains dedicated to this function. We also stress that the formation of crossovers is dependent on the presence of adequate stabilizing sequences. Investigation of the impact of such structures on enzyme activity is important in order to both improve our knowledge of the mechanism of action of the topoisomerase II and to develop new inhibitors of this enzyme.

RNA folding and the origins of catalytic activity in the hairpin ribozyme

The nucleolytic ribozymes catalyse site-specific phosphodiester cleavage and ligation transesterification reactions in RNA. The hairpin ribozyme folds to generate an intimate loop–loop interaction to create the local environment in which catalysis can proceed. We have studied the ion-induced folding using single-molecule FRET experiments, showing that the four-way helical junction accelerates the folding 500-fold by introducing a discrete intermediate that juxtaposes the loops. Using FRET we can observe individual hairpin ribozyme molecules as they undergo multiple cycles of cleavage and ligation, and measure the rates of the internal reactions, free of uncertainties in the contributions of docking and substrate dissociation processes. On average, the cleaved ribozyme undergoes several docking–undocking events before a ligation reaction occurs. On the basis of these experiments, we have explored the role of the nucleobases G 8 and A 38 in the catalysis. Both cleavage and ligation reactions are pH dependent, corresponding to the titration of a group with p K a = 6.2. We have used a novel ribonucleoside in which these bases are replaced by imidazole to investigate the role of acid–base catalysis in this ribozyme. We observe significant rates of cleavage and ligation, and a bell-shaped pH dependence for both.

The Basic Domain of TRF2 Directs Binding to DNA Junctions Irrespective of the Presence of TTAGGG Repeats

The replication of long tracts of telomeric repeats may require specific factors to avoid fork regression (Fouché, N., Ozgür, S., Roy, D., and Griffith, J. (2006) Nucleic Acids Res., in press). Here we show that TRF2 binds to model replication forks and four-way junctions in vitro in a structure-specific but sequence-independent manner. A synthetic peptide encompassing the TRF2 basic domain also binds to DNA four-way junctions, whereas the TRF2 truncation mutant (TRF2(DeltaB)) and a mutant basic domain peptide do not. In the absence of the basic domain, the ability of TRF2 to localize to model telomere ends and facilitate t-loop formation in vitro is diminished. We propose that TRF2 plays a key role during telomere replication in binding chickenfoot intermediates of telomere replication fork regression. Junction-specific binding would also allow TRF2 to stabilize a strand invasion structure that is thought to exist at the strand invasion site of the t-loop.

Biodegradable LC Oligomers with Cranked Branching Points Form Highly Oriented Fibrous Scaffold for Cytoskeletal Orientation

Thermotropic liquid crystalline (LC) hyperbranch oligoesters (molecular weight of ca. 8 kDa) composed of rigid biodegradable segments, oligo{4-hydroxycinnamic acid (4HCA)}, plus a multifunctional biomolecule, cholic acid (CA), were prepared. Semiempirical calculations for the most stable conformation of the model compound CA derivatives with four arms of 4HCA tetramer showed that every arm can adopt an almost parallel orientation and that the CA unit can form a crankshaft architecture and function as a four-way junction of a branch point. Oligo(4HCA-co-CA)s successfully form molecularly oriented fibers with a high orientation degree by spinning viscous LC melts. Scanning electron microscopy demonstrated that mouse fibroblasts oriented uniaxially along the fiber longitudinal axis. Moreover, confocal fluorescence scanning microscopy showed that the RFP-stained cytoskeleton of these fibroblasts oriented highly.

Dodecameric Structure and ATPase Activity of the Human TIP48/TIP49 Complex

TIP48 and TIP49 are two related and highly conserved eukaryotic AAA + proteins with an essential biological function and a critical role in major pathways that are closely linked to cancer. They are found together as components of several highly conserved chromatin-modifying complexes. Both proteins show sequence homology to bacterial RuvB but the nature and mechanism of their biochemical role remain unknown. Recombinant human TIP48 and TIP49 were assembled into a stable high molecular mass equimolar complex and tested for activity in vitro. TIP48/TIP49 complex formation resulted in synergistic increase in ATPase activity but ATP hydrolysis was not stimulated in the presence of single-stranded, double-stranded or four-way junction DNA and no DNA helicase or branch migration activity could be detected. Complexes with catalytic defects in either TIP48 or TIP49 had no ATPase activity showing that both proteins within the TIP48/TIP49 complex are required for ATP hydrolysis. The structure of the TIP48/TIP49 complex was examined by negative stain electron microscopy. Three-dimensional reconstruction at 20 Å resolution revealed that the TIP48/TIP49 complex consisted of two stacked hexameric rings with C6 symmetry. The top and bottom rings showed substantial structural differences. Interestingly, TIP48 formed oligomers in the presence of adenine nucleotides, whilst TIP49 did not. The results point to biochemical differences between TIP48 and TIP49, which may explain the structural differences between the two hexameric rings and could be significant for specialised functions that the proteins perform individually.

RusA Holliday junction resolvase: DNA complex structure--insights into selectivity and specificity.

We have determined the structure of a catalytically inactive D70N variant of the Escherichia coli RusA resolvase bound to a duplex DNA substrate that reveals critical protein–DNA interactions and permits a much clearer understanding of the interaction of the enzyme with a Holliday junction (HJ). The RusA enzyme cleaves HJs, the fourway DNA branchpoints formed by homologous recombination, by introducing symmetrical cuts in the phosphodiester backbone in a Mg2+ dependent reaction. Although, RusA shows a high level of selectivity for DNA junctions, preferring to bind fourway junctions over other substrates in vitro, it has also been shown to have appreciable affinity for duplex DNA. However, RusA does not show DNA cleavage activity with duplex substrates. Our structure suggests the possible basis for structural selectivity as well as sources of the sequence specificity observed for DNA cleavage by RusA.

A K52Q substitution in the globular domain of histone H1t modulates its nucleosome binding properties

A comparison of the globular domain sequences of the somatic H1d and testis-specific H1t revealed a single substitution of lysine 52 in H1d to glutamine 54 in H1t, which is one of the three crucial residues within the second DNA binding site. The globular domains of both histones were modeled using the crystal structure of chicken GH5 as a template and was also docked onto the nucleosome structure. The glutamine residue in histone H1t forms a hydrogen bond with main chain carbonyl of methionine-52 (in H1t) and is spatially oriented away from the nucleosome dyad axis. A consequence of this change was a lower affinity of recombinant histone H1t towards Four-way junction DNA and reconstituted 5S mononucleosomes. When Gln-54 in Histone H1t was mutated to lysine, its binding affinity towards DNA substrates was comparable to that of histone H1d. The differential binding of histones H1d and H1t towards reconstituted mononucleosomes was also reflected in the chromatosome-stop assay.