Four-helix Bundle Protein Research Articles

A Model Membrane Protein for Binding Volatile Anesthetics

Earlier work demonstrated that a water-soluble four-helix bundle protein designed with a cavity in its nonpolar core is capable of binding the volatile anesthetic halothane with near-physiological affinity (0.7 mM K d). To create a more relevant, model membrane protein receptor for studying the physicochemical specificity of anesthetic binding, we have synthesized a new protein that builds on the anesthetic-binding, hydrophilic four-helix bundle and incorporates a hydrophobic domain capable of ion-channel activity, resulting in an amphiphilic four-helix bundle that forms stable monolayers at the air/water interface. The affinity of the cavity within the core of the bundle for volatile anesthetic binding is decreased by a factor of 4–3.1 mM K d as compared to its water-soluble counterpart. Nevertheless, the absence of the cavity within the otherwise identical amphiphilic peptide significantly decreases its affinity for halothane similar to its water-soluble counterpart. Specular x-ray reflectivity shows that the amphiphilic protein orients vectorially in Langmuir monolayers at higher surface pressure with its long axis perpendicular to the interface, and that it possesses a length consistent with its design. This provides a successful starting template for probing the nature of the anesthetic-peptide interaction, as well as a potential model system in structure/function correlation for understanding the anesthetic binding mechanism.

Structural Examination of Φ-Value Analysis in Protein Folding

Protein folding intermediates and transition states are commonly characterized using a protein engineering procedure (Phi-value analysis) based on several assumptions, including (1) intermediates and transition states have native-like conformations and (2) single mutations from larger hydrophobic residues to smaller ones do not perturb their structures. Although Phi-value analysis has been widely used, these assumptions have not been tested to date because of the lack of high-resolution structures of intermediates and transition states. We recently have determined the structure of a folding intermediate for a four-helix bundle protein (Rd-apocytochrome b(562)) using NMR. The intermediate has the N-terminal helix unfolded. The other three helices fold in a native-like topology with extensive non-native hydrophobic interactions. Here, we have determined the Phi values for 14 hydrophobic core residues, including those with significant non-native interactions. All of the Phi values are in the normal range from 0 to 1, indicating that these non-native interactions cannot be identified by the common Phi-value analysis, and therefore, the first assumption is not valid for this intermediate. We also determined the structure of a mutant (F65A) of the intermediate and found that the structure of the intermediate is not perturbed by the mutation, supporting the second assumption. Together, these results suggest that Phi-value analysis may be valid for characterizing the energetics of the interactions between the mutated residue and others, but not for determining the detailed structures of intermediates and transition states because non-native interactions may exist and may not be identifiable by the common Phi-value analysis.

Spectroscopic Identification of Different Types of Copper Centers Generated in Synthetic Four-Helix Bundle Proteins

Using a combined rational-combinatorial approach, stable copper binding sites were implemented in template-assembled synthetic four-helix bundle proteins constructed by three different helices with only 16 amino acid residues. These peptides include two histidines and one cysteine at positions appropriate for coordinating a copper ion. Sequence variations of the helices were made in the second coordination shell or even more remote from the copper binding site (i) to increase the overall stability of the metalloproteins and (ii) to fine-tune the structure and properties of the copper center. As a result, ca. 90% of the 180 proteins that were synthesized were capable to bind copper with a substantially higher specificity than those obtained in the first design cycle (Schnepf, R.; Horth, P.; Bill, E.; Wieghardt, K.; Hildebrandt, P.; Haehnel, W. J. Am. Chem. Soc. 2001, 123, 2186-2195). Furthermore, the stabilities of the copper protein complexes were increased by up to 2 orders of magnitude and thus allowed a UV-vis absorption, resonance Raman, electron paramagnetic resonance, and (magnetic) circular dichroism spectroscopic identification and characterization of three different types of copper binding sites. It could be shown that particularly steric perturbations in the vicinity of the His(2)Cys ligand set control the formation of either a tetragonal (type II) or a tetrahedral (type I) copper binding site. With the introduction of two methionine residues above the histidine ligands, a mixed-valent dinuclear copper binding site was generated with spectroscopic properties that are very similar to those of Cu(A) sites in natural proteins. The results of the present study demonstrate for the first time that structurally different metal binding sites can be formed and stabilized in four-helix bundle proteins.

Excluded volume entropic effects on protein unfolding times and intermediary stability.

The dynamics of protein folding result from both enthalpic and entropic contributions to the free energy. In this paper we focus on entropic volume exclusion effects. We carry out computer simulations using a model that allows us to independently change the size or biochemical properties of amino acid residues. To determine the importance of excluded volume effects, we investigate the effects of changing the size of side chains on the unfolding dynamics of a model four-helix bundle protein. In addition, we also investigate the effects of changing the thickness of the chain's backbone. This has relevance to the behavior of synthetic polymers where the size of the constituent units can be varied. We find that entropic excluded volume effects are crucially important for stabilizing the organized native state relative to the molten globule.

A cell-based screen for function of the four-helix bundle protein Rop: a new tool for combinatorial experiments in biophysics.

Combinatorial methodologies have revolutionized studies in biomolecular function, but they have so far proven less useful for understanding macromolecular structure and stability. This is largely because of the difficulty of screening libraries of molecules for biophysical properties, and the difficulty of interpreting structural effects in complicated molecules. Here, we report a novel, robust, cell-based screen for function of the four-helix bundle protein, Rop. By expression of green fluorescent protein from a ColE1 plasmid, the screen reports the copy number of the plasmid, which is modulated in Escherichia coli by Rop. We have engineered the screen so that the fluorescent phenotype can correspond to either Rop activity or lack thereof. We have used the screen to demonstrate with systematically constructed Rop core variants that not all molecules that bind small stem-loop RNAs in vitro are active in vivo. Rop is well understood from structural work and systematic mutations, which makes it possible to construct rational, targeted libraries. This screen makes it possible to rapidly interrogate such libraries effectively for proper protein folding and stability. In addition to its intended utility for combinatorial experiments in biophysics, the screen will allow further dissection of the mechanism of Rop-mediated plasmid copy number regulation in vivo.

Specific non-native hydrophobic interactions in a hidden folding intermediate: implications for protein folding.

Structures of intermediates and transition states in protein folding are usually characterized by amide hydrogen exchange and protein engineering methods and interpreted on the basis of the assumption that they have native-like conformations. We were able to stabilize and determine the high-resolution structure of a partially unfolded intermediate that exists after the rate-limiting step of a four-helix bundle protein, Rd-apocyt b(562), by multidimensional NMR methods. The intermediate has partial native-like secondary structure and backbone topology, consistent with our earlier native state hydrogen exchange results. However, non-native hydrophobic interactions exist throughout the structure. These and other results in the literature suggest that non-native hydrophobic interactions may occur generally in partially folded states. This can alter the interpretation of mutational protein engineering results in terms of native-like side chain interactions. In addition, since the intermediate exists after the rate-limiting step and Rd-apocyt b(562) folds very rapidly (k(f) approximately 10(4) s(-1)), these results suggest that non-native hydrophobic interactions, in the absence of topological misfolding, are repaired too rapidly to slow folding and cause the accumulation of folding intermediates. More generally, these results illustrate an approach for determining the high-resolution structure of folding intermediates.

Binding of Zn-chlorin to a synthetic four-helix bundle peptide through histidine ligation.

We have used a two histidine-containing synthetic peptide (Sharp et al. (1998) Proc. Natl. Acad. Sci. U.S.A. 95, 10465-10470) as a scaffold to bind Zn(II) chlorin e6 (ZnCe6) through histidine ligation. Protocols for the preparation and purification of the peptide using an Escherichia coli expression system are presented. Size-exclusion chromatography and circular dichroism measurements indicate that the peptide self-assembles into a four-helix bundle protein. Two variants of the peptide lacking either one or both of the histidine residues were used to demonstrate the stoichiometry of ZnCe6 binding. Comparison of the titration profiles determined by UV-vis spectroscopy for the purified one- and two-histidine peptides suggests that the two-histidine peptide can bind two ZnCe6. The binding stoichiometry of ZnCe6 was verified by gel chromatography and native gel electrophoresis using the peptide variant lacking histidine residues as the control. Like many other chlorophyll analogue molecules, ZnCe6 can be photooxidized. The light-induced electron transfer between the ZnCe6-peptide complex and the added phenyl-p-benzoquinone was measured using time-resolved EPR spectroscopy and shown to be faster and have a higher yield than the electron transfer between unbound ZnCe6 and quinone. The implications of constructing a ZnCe6-peptide complex in terms of artificial photosynthesis are discussed.

Multifunctional Folded Polypeptides from Peptide Synthesis and Site‐Selective Self‐Functionalization — Practical Scaffolds in Aqueous Solution.

The site selectivity of His-mediated lysine and ornithine side-chain acylation in a designed four-helix bundle protein scaffold was mapped by reaction of several polypeptides with one equivalent of ...

Redesign of a four-helix bundle protein by phage display coupled with proteolysis and structural characterization by NMR and X-ray crystallography.

To test whether it is practical to use phage display coupled with proteolysis for protein design, we used this approach to convert a partially unfolded four-helix bundle protein, apocytochrome b(562), to a stably folded four-helix bundle protein. Four residues expected to form a hydrophobic core were mutated. One residue was changed to Trp to provide a fluorescence probe for studying the protein's physical properties and to partially fill the void left by the heme. The other three positions were randomly mutated. In addition, another residue in the region to be redesigned was substituted with Arg to provide a specific cutting site for protease Arg-c. This library of mutants was displayed on the surface of phage and challenged with protease Arg-c to select stably folded proteins. The consensus sequence that emerged from the selection included hydrophobic residues at only one of the three positions and non-hydrophobic residues at the other two. Nevertheless, the selected proteins were thermodynamically very stable. The structure of a selected protein was characterized using multi-dimensional NMR. All four helices were formed in the structure. Further, site-directed mutagenesis was used to change one of the two non-hydrophobic residues to a hydrophobic residue, which increased the stability of the protein, indicating that the selection result was not based solely on the protein's global stability and that local structural characteristics may also govern the selection. This conclusion is supported by the crystal structure of another mutant that has two hydrophobic residues substituted for the two non-hydrophobic residues. These results suggest that the hydrophobic interactions in the core are not sufficient to dictate the selection and that the location of the cutting site of the protease also influences the selection of structures.

Populating partially unfolded forms by hydrogen exchange-directed protein engineering.

The native-state hydrogen exchange of a redesigned apocytochrome b(562) suggests that at least two partially unfolded forms (PUFs) exist for this four-helix bundle protein under native conditions. The more stable PUF has the N-terminal helix unfolded. To verify the conclusion further and obtain more detailed structural information about this PUF, five hydrophobic core residues in the N-terminal helix were mutated to Gly and Asp to destabilize the native state selectively and populate the PUF for structural studies. The secondary structure and the backbone dynamics of this mutant were characterized using multidimensional NMR. Consistent with the prediction, the N-terminal region of the mutant was found to be unfolded while other parts of the proteins remained folded. These results suggest that native-state hydrogen exchange-directed protein engineering can be a useful approach to populating partially unfolded forms for detailed structural studies.

Control of lysine reactivity in four-helix bundle proteins by site-selective pKa depression: expanding the versatility of proteins by postsynthetic functionalization.

Five 42-residue polypeptides have been designed to fold into hairpin helix-loop-helix motifs that dimerize to form four-helix bundles, and to serve as protein scaffolds for the elucidation at the molecular level of the principles that control and fine-tune lysine and ornithine reactivities in a protein context. Site-selective control of Lys and Orn reactivity provides a mechanism for addressing directly individual residues and is a prerequisite for the site-selective functionalization of folded proteins. Several lysine and one ornithine residues were introduced on the surface and in the hydrophobic core of the folded motif. The reactivity of each residue was determined by measuring the degree of acylation of the trypsin cleaved fragments by HPLC and mass spectrometry. The most reactive residues were Orn34 and Lys19, both of which were located in d positions in the heptad repeat, and therefore in hydrophobic environments. Upon reaction of the helix-loop-helix dimer KA-I with one equivalent of mono-p-nitrophenyl fumarate, Orn34 was acylated approximately three times more efficiently than Lys19, whereas Lys10 (b position), Lys15 (g position), and Lys33 (c position) remained unmodified. In the sequence KA-I-A(15) Lys15 was replaced by an alanine residue and the selectivity of Orn34 over Lys19 increased to approximately a factor of six, probably because Lys15 had the capacity to reduce the pK(a) value of Lys19 and 85 % of site-selectively monoacylated product was obtained. The pH dependence of the acylation reaction was determined and showed that the pK(a) of the reactive residues were 9.3, more than a pK(a) unit below the magnitude of the corresponding residue in a solvent exposed position. Introducing Lys and Orn residues into a or d positions of the heptad repeat therefore serves as a mechanism of depressing their pK(a) to increase their reactivity site selectively. Extensive NMR and CD spectroscopic analyses showed that the sequences fold according to prediction.

Multifunctional folded polypeptides from peptide synthesis and site-selective self-functionalization--practical scaffolds in aqueous solution.

The site selectivity of His-mediated lysine and ornithine side-chain acylation in a designed four-helix bundle protein scaffold was mapped by reaction of several polypeptides with one equivalent of mono-p-nitrophenyl fumarate in aqueous solution at pH 5.9 and room temperature followed by an analysis of the degrees and sites of acylation. Integration of the HPLC chromatograms of the acylated polypeptides and trypsin cleavage followed by mass spectrometry analysis of the tryptic fragments provided the experimental evidence. Based on these and previously published results a strategy was developed for the site-selective and stepwise incorporation of three residues into a folded polypeptide in aqueous solution at room temperature. The first substituent was incorporated by reaction of a 1.7-fold excess of the corresponding active ester with the polypeptide at pH 5.9, the second substituent was introduced in a 3-fold excess after the pH value was raised to 8, and the third substituent was incorporated by reaction of a 10-fold excess with the polypeptide at pH 5.9. No intermediate steps of purification were taken and the overall yield was 30 % or more. Examples of the substituents included are carbohydrates, an enzyme inhibitor, a fumarate, and an acetate group. The introduction of different substituents into three individually addressable positions in a stepwise, efficient, and controllable reaction demonstrates that designed folded polypeptides are practically useful scaffolds that can be functionalized by using very simple chemistry in aqueous solution. Predicted applications include designed receptors, biosensors, and molecular devices.

Setting the stage for new catalytic functions in designed proteins--exploring the imine pathway in the efficient decarboxylation of oxaloacetate by an Arg-Lys site in a four-helix bundle protein scaffold.

Fourteen 42-residue polypeptides have been designed to identify reactive sites for the catalysis of the decarboxylation of oxaloacetate, a chemical transformation that proceeds through the formation of an imine intermediate. The sequences fold into helix-loop-helix motifs and dimerize to four-helix bundles. The catalytically active lysine residues were incorporated in several surface exposed positions, but also in positions characterised by hydrophobic properties to reduce their pKa values. The molecular environments of the Lys residues were systematically varied, to find which residues were able to stabilise and bind the imine intermediate in the decarboxylation reaction. A two-residue Arg-Lys site formed the main component of the reactive site of the helix-loop-helix dimer Decarb-K34_R33, which obeyed saturation kinetics in catalysing the reaction with a kcat/KM of 0.59 M-1S-1. The rate constant measured was nearly three orders of magnitude larger than the second-order rate constant of the butylamine-catalysed reaction (0.0011 M-1S-1), and four orders of magnitude larger than the pseudo first-order rate constant of the uncatalyzed reaction (1.3 x 10(-5) s(-1)). The sequence of Decarb-K34_R33 contained only a single lysine residue. It was flanked by an arginine in the preceding position in the sequence. A flanking Arg residue provided more efficient catalysis than a flanking Lys or Gln residue. Arginines in flanking positions in the helix, in positions four residues before or after the Lys in the sequence, are not as important in catalysis as the Arg of the Arg-Lys pair. The effect of pKa on the catalytic efficiency of the Lys residue in the decarboxylation reaction is well known. The identification of the role of the flanking Arg residue in catalysing decarboxylation, its optimal position, and the importance of conformational stability reported here sets the stage for developing a number of catalytic systems that depend on the formation of imine intermediates, but that lead to different reaction products.

Relationship between the native-state hydrogen exchange and folding pathways of a four-helix bundle protein.

The hydrogen exchange behavior of a four-helix bundle protein in low concentrations of denaturant reveals some partially unfolded forms that are significantly more stable than the fully unfolded state. Kinetic folding of the protein, however, is apparently two-state in the absence of the accumulation of early folding intermediates. The partially unfolded forms are either as folded as or more folded than the rate-limiting transition state and appear to represent the major intermediates in a folding and unfolding reaction. These results are consistent with the suggestion that partially unfolded intermediates may form after the rate-limiting step for small proteins with apparent two-state folding kinetics.

Folding of a de Novo Designed Native-like Four-helix Bundle Protein

The folding of a model native-like dimeric four-helix bundle protein, (alpha(2))(2), was investigated using guanidine hydrochloride, hydrostatic pressure, and low temperature. Unfolding by guanidine hydrochloride followed by circular dichroism and intrinsic fluorescence spectroscopy revealed a highly cooperative transition between the native-like and unfolded states, with free energy of unfolding determined from CD data, DeltaG(unf) = 14.3 +/- 0.8 kcal/mol. However, CD and intrinsic fluorescence data were not superimposable, indicating the presence of an intermediate state during the folding transition. To stabilize the folding intermediate, we used hydrostatic pressure and low temperature. In both cases, dissociation of the dimeric native-like (alpha(2))(2) into folded monomers (alpha(2)) was observed. van't Hoff analysis of the low temperature experiments, assuming a two-state dimer 171-monomer transition, yielded a free energy of dissociation of (alpha(2))(2) of DeltaG(diss) = 11.4 +/- 0.4 kcal/mol, in good agreement with the free energy determined from pressure dissociation experiments (DeltaG(diss) = 10.5 +/- 0.1 kcal/mol). Binding of the hydrophobic fluorescent probe 4,4'-dianilino-1,1'-binaphthyl-5,5'-disulfonic acid (bis-ANS) to the pressure- and cold-dissociated states of (alpha(2))(2) indicated the existence of molten-globule monomers. In conclusion, we demonstrate that the folding pathway of (alpha(2))(2) can be described by a three-state transition including a monomeric molten globule-like state.

Efficiency of paramagnetism-based constraints to determine the spatial arrangement of alpha-helical secondary structure elements.

A computational approach has been developed to assess the power of paramagnetism-based backbone constraints with respect to the determination of the tertiary structure, once the secondary structure elements are known. This is part of the general assessment of paramagnetism-based constraints which are known to be relevant when used in conjunction with all classical constraints. The paramagnetism-based constraints here investigated are the pseudocontact shifts, the residual dipolar couplings due to self-orientation of the metalloprotein in high magnetic fields, and the cross correlation between dipolar relaxation and Curie relaxation. The relative constraints are generated by back-calculation from a known structure. The elements of secondary structure are supposed to be obtained from chemical shift index. The problem of the reciprocal orientation of the helices is addressed. It is shown that the correct fold can be obtained depending on the length of the alpha-helical stretches with respect to the length of the non helical segments connecting the alpha-helices. For example, the correct fold is straightforwardly obtained for the four-helix bundle protein cytochrome b562, while the double EF-hand motif of calbindin D9k is hardly obtained without ambiguity. In cases like calbindin D9k, the availability of datasets from different metal ions is helpful, whereas less important is the location of the metal ion with respect to the secondary structure elements.

Diffusion-Collision Model Study of Misfolding in aFour-Helix Bundle Protein

Proteins with complex folding kinetics will be susceptible to misfolding at some stage in the folding process. We simulate this problem by using the diffusion-collision model to study non-native kinetic intermediate misfolding in a four-helix bundle protein. We find a limit on the size of the pairwise hydrophobic area loss in non-native intermediates, such that burying above this limit creates long-lasting non-native kinetic intermediates that would disrupt folding and prevent formation of the native state. Our study of misfolding suggests a method for limiting the production of misfolded kinetic intermediates for helical proteins and could, perhaps, lead to more efficient production of proteins in bulk.

(15)N backbone dynamics of ferricytochrome b(562): comparison with the reduced protein and the R98C variant.

The backbone dynamics of ferricytochrome b(562), a four-helix bundle protein from Escherichia coli, have been studied by NMR spectroscopy. The consequences of the introduction of a c-type thioether linkage between the heme and protein and the reduction to the ferrous cytochrome have also been analyzed. (15)N relaxation rates R(1) and R(2) and (1)H-(15)N NOEs were measured at proton Larmor frequencies of 500 and 600 MHz for the oxidized and reduced protein as well as for the oxidized R98C variant. In the latter protein, an "artificial" thioether covalent bond has been introduced between the heme group and the protein frame [Arnesano, F., Banci, L., Bertini, I., Ciofi-Baffoni, S., de Lumley Woodyear, T., Johnson, C. M., and Barker, P. D. (2000) Biochemistry 39, 1499-1514]. The (15)N relaxation data were analyzed with the ModelFree protocol, and the mobility parameters on the picosecond to nanosecond time scale were compared for the three species. The three forms are rather rigid as a whole, with average generalized order parameters values of 0.87 +/- 0.08 (oxidized cytochrome b(562)), 0.84 +/- 0.07 (reduced cytochrome b(562)), and 0.85 +/- 0.07 (oxidized R98C cytochrome b(562)), indicating similar mobility for each system. Lower order parameters (S(2)) are found for residues belonging to loops 1 and 2. Higher mobility, as indicated by lower order parameters, is found for heme binding helices alpha 1 and alpha 4 in the R98C variant with respect to the wild-type protein. The analysis requires a relatively long rotational correlation time (tau(m) = 9.6 ns) whose value is accounted for on the basis of the anisotropy of the molecular shape and the high phosphate concentration needed to ensure the occurrence of monomer species. A parallel study of motions in the millisecond to microsecond time scale has also been performed on oxidized wild-type and R98C cytochrome b(562). In a CPMG experiment, decay rates were analyzed in the presence of spin-echo pulse trains of variable spacing. The dynamic behavior on this time scale is similar to that observed on the sub-nanosecond time scale, showing an increased mobility in the residues connected to the heme ligands in the R98C variant. It appears that the increased protein stability of the variant, established previously, is not correlated with an increase in rigidity.

Hydrophobic modulation of heme properties in heme protein maquettes.

We have investigated the properties of the two hemes bound to histidine in the H10 positions of the uniquely structured apo form of the heme binding four-helix bundle protein maquette [H10H24-L6I,L13F](2), here called [I(6)F(13)H(24)](2) for the amino acids at positions 6 (I), 13 (F) and 24 (H), respectively. The primary structure of each alpha-helix, alpha-SH, in [I(6)F(13)H(24)](2) is Ac-CGGGEI(6)WKL.H(10)EEF(13)LKK.FEELLKL.H(24)EERLKK.L-CONH(2). In our nomenclature, [I(6)F(13)H(24)] represents the disulfide-bridged di-alpha-helical homodimer of this sequence, i.e., (alpha-SS-alpha), and [I(6)F(13)H(24)](2) represents the dimeric four helix bundle composed of two di-alpha-helical subunits, i.e., (alpha-SS-alpha)(2). We replaced the histidines at positions H24 in [I(6)F(13)H(24)](2) with hydrophobic amino acids incompetent for heme ligation. These maquette variants, [I(6)F(13)I(24)](2), [I(6)F(13)A(24)](2), and [I(6)F(13)F(24)](2), are distinguished from the tetraheme binding parent peptide, [I(6)F(13)H(24)](2), by a reduction in the heme:four-helix bundle stoichiometry from 4:1 to 2:1. Iterative redesign has identified phenylalanine as the optimal amino acid replacement for H24 in the context of apo state conformational specificity. Furthermore, the novel second generation diheme [I(6)F(13)F(24)](2) maquette was related to the first generation diheme [H10A24](2) prototype, [L(6)L(13)A(24)](2) in the present nomenclature, via a sequential path in sequence space to evaluate the effects of conservative hydrophobic amino acid changes on heme properties. Each of the disulfide-linked dipeptides studied was highly helical (>77% as determined from circular dichroism spectroscopy), self-associates in solution to form a dimer (as determined by size exclusion chromatography), is thermodynamically stable (-DeltaG(H)2(O) >18 kcal/mol), and possesses conformational specificity that NMR data indicate can vary from multistructured to single structured. Each peptide binds one heme with a dissociation constant, K(d1) value, tighter than 65 nM forming a series of monoheme maquettes. Addition of a second equivalent of heme results in heme binding with a K(d2) in the range of 35-800 nM forming the diheme maquette state. Single conservative amino acid changes between peptide sequences are responsible for up to 10-fold changes in K(d) values. The equilibrium reduction midpoint potential (E(m7.5)) determined in the monoheme state ranges from -156 to -210 mV vs SHE and in the diheme state ranges from -144 to -288 mV. An observed heme-heme electrostatic interaction (>70 mV) in the diheme state indicates a syn global topology of the di-alpha-helical monomers. The heme affinity and electrochemistry of the three H24 variants studied identify the tight binding sites (K(d1) and K(d2) values <200 nM) having the lower reduction midpoint potentials (E(m7.5) values of -155 and -260 mV) with the H10 bound hemes in the parent tetraheme state of [H10H24-L6I,L13F](2), here called [I(6)F(13)H(24)](2). The results of this study illustrate that conservative hydrophobic amino acid changes near the heme binding site can modulate the E(m) by up to +/-50 mV and the K(d) by an order of magnitude. Furthermore, the effects of multiple single amino acid changes on E(m) and K(d) do not appear to be additive.

De novo design and characterization of copper centers in synthetic four-helix-bundle proteins.

The design and chemical synthesis of de novo metalloproteins on cellulose membranes with the structure of an antiparallel four-helix bundle is described. All possible combinations of three different sets of amphiphilic helices were assembled on cyclic peptide templates which were bound by a cleavable linker to the cellulose. In the hydrophobic interior, the four-helix bundle proteins carry a cysteine and several histidines at various positions for copper ligation. This approach was used successfully to synthesize, for the first time, copper proteins based on a four-helix bundle. UV-vis spectra monitored on the solid support showed ligation of copper(II) by about one-third out of the 96 synthesized proteins and tetrahedral complexes of cobalt(II) by most of these proteins. Three of the most stable copper-binding proteins were synthesized in solution and their structural properties analyzed by spectroscopic methods. Circular dichroism, one-dimensional NMR, and size-exclusion chromatography indicate a folding into a compact state containing a high degree of secondary structure with a reasonably ordered hydrophobic core. They displayed UV-vis absorption, resonance Raman, and EPR spectra intermediate between those of type 1 and type 2 copper centers. The present approach provides a sound basis for further optimizing the copper binding and its functional properties by using combinatorial protein chemistry guided by rational principles.