Pesticide Formulations Research Articles

Nanomaterials and Nanotechnology in Agricultural Pesticide Delivery: A Review.

Pesticides play a crucial role in ensuring food production and food security. Conventional pesticide formulations can not meet the current needs of social and economic development, and they also can not meet the requirements of green agriculture. Therefore, there is an urgent need to develop efficient, stable, safe, and environmentally friendly pesticide formulations to gradually replace old formulations which have high pollution and low efficacy. The rise of nanotechnology provides new possibilities for innovation in pesticide formulations. Through reasonable design and construction of an environmentally friendly pesticide delivery system (PDS) based on multifunctional nanocarriers, the drawbacks of conventional pesticides can be effectively solved, realizing a water-based, nanosized, targeted, efficient, and safe pesticide system. In the past five years, researchers in chemistry, materials science, botany, entomology, plant protection, and other fields are paying close attention to the research of nanomaterials based PDSs and nanopesticide formulations and have made certain research achievements. These explorations provide useful references for promoting the innovation of nanopesticides and developing a new generation of green and environmentally friendly pesticide formulations. This Perspective summarizes the recent advances of nanomaterials in PDSs and nanopesticide innovation, aiming to provide useful guidance for carrier selection, surface engineering, controlled release conditions, and application in agriculture.

Use of the threshold of toxicological concern (TTC) approach as an alternative tool for regulatory purposes: A case study with an inert ingredient used in pesticide products

This study investigates the potential of the Threshold of Toxicological Concern (TTC) as an alternative to traditional animal testing in pesticide regulatory risk assessments. The TTC is a principle that establishes exposure threshold values for chemicals with certain structural features, below which there is no appreciable risk to human health.A case study was conducted with α-terpineol, an inert ingredient proposed to be used at low concentrations in pesticide products, to compare a conventional risk assessment using animal data with one using the TTC method. For the conventional risk assessment, animal data showed that there was no toxicity endpoint of concern, which resulted in a qualitative assessment and no risks of concern identified. For the risk assessment using the TTC method, a 5th percentile no-observed-effect level (NOEL) selected based on α-terpineol's Cramer classification was used as a point of departure (POD) for a quantitative risk assessment that resulted in no risks of concern identified. Therefore, the same conclusion was reached with both approaches and α-terpineol is considered safe for use in pesticide products at low concentrations. A comparative analysis was also performed to determine the applicability of the TTC method in calculating potential dietary risk from common pesticide use patterns for chemicals that fall within different Cramer classes. Results showed that use of the TTC method may be feasible for inert ingredient risk assessments when chemicals are used in a pesticide product at concentrations below 1%.This research underscores the TTC as a valuable and robust tool for assessing the potential hazards from inert ingredient use in pesticide formulations, considering factors such as chemical properties and the concentrations at which a chemical may be used in pesticide products. These findings contribute to the ongoing efforts by the United States Environmental Protection Agency (US EPA) to reduce animal testing in chemical safety assessments. The TTC method presents a viable alternative for risk evaluations of chemicals used at low concentrations, with anticipated low exposure, and with a predicted low toxicity potential.

Controlled release formulations of organophosphorus pesticides based on ecofriendly novel and conventional matrices for agro-environmental sustainability

Controlled release formulations (CRFs) of the organophosphorus pesticides diazinon and dichlorvos were prepared from a novel cow dung ash (CDA) matrix and the more conventional starch (STA) matrix. Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM) and X-ray diffraction (XRD) were used to characterize the CRFs. FTIR and XRD spectral data provide evidence for pesticide-matrix interactions fundamental to observed matrix surface binding and pesticide release behaviour in water and soil environments. Properties evaluation of the CRFs reveal similar magnitudes of loading capacity and encapsulation efficiency of CDA- and STA-based CRFs of both pesticides, while the order CDA > STA prevails in matrix porosity and swelling ability. Technical grade (TG) and the CRF-encapsulated pesticides exhibit “burst” release profiles in water; pesticide quantities released at similar lengths of time follow the order TG >> STA-CRF > CDA-CRF, thus revealing the capacity of the CRFs to constrain the active ingredients from free mobility, with CDA-CRF being the more slightly efficacious. The Korsmeyer-Peppas equation reasonably models pesticide release from both CRFs into water, giving n values consistent with both water diffusion into the matrix and matrix relaxation as kinetically important in both matrices. Soil column experiments demonstrate the potential of the CFRs to mitigate ground water pollution. Overall, the results show that CDA- and STA-based CRFs of both pesticides have roughly the same potency for pesticide controlled release and ground water pollution mitigation. Deployment of these CFRs can contribute to the drive for agro-environmental sustainability, while the use of CDA, a waste material, as a matrix in controlled pesticide delivery would resonate with sustainable bioresource utilization.

A comparative analysis of beta-cypermethrin nanoemulsion and traditional emulsion dosages on enzyme activities in Blattella germanica

ObjectiveTo compare the impact of two pesticide dose forms on Blattella germanica (B. germanica)resistance enzymes.The micro-drop technique was utilized on subcultured B. germanica, and the metabolic enzyme activity was assessed.Using spectrophotometry, the relative enzyme activities of B.germanica were determined.Profile analysis was used to compare the enzyme activities of beta-cypermethrin in both nanoemulsion and traditional emulsion forms.Findings: The suppression percentages of the acetylcholinesterase enzyme (AchE), GST, and P450–O demethylases across different pesticide formulations were analyzed using regression equations, yielding F = 31.18, P < 0.001; F = 9.18, P < 0.001; and F = 4.58, P < 0.02.Conclusion: The suppression of AchE, GST, and P450–O demethylase by beta-cypermethrin nanoemulsion was more significant compared to the beta-cypermethrin emulsifiable concentrate.The study concluded that beta-cypermethrin nanoemulsion had a significant impact on insect detoxifying enzymes compared to beta-cypermethrin emulsifiable concentrate due to their numerous advantages.

A simple and quick run time RP-HPLC method for simultaneously analysis of pyrazosulfuron ethyl and pretilachlor content on GR formulation

Aim of the study was to develop and validate simple and quick run time reverse phase HPLC method for the simultaneous determination of pyrazosulfuron ethyl and pretilachlor in the pesticide formulation of GR. The method was executed toward using the Agilent Eclipse XDB C-18 column (150 x 4.6 mm; 3.5 μm), alongside the mobile phase comprising of 0.1 % (ortho phosphoric acid) with water: acetonitrile (30:70) at a column rate of flow 1.2 mL per minute and determination has been carried out in 220 nm. The retention time for Pyrazosulfuron Ethyl as well as Pretilachlor have been determined at 1.99 as well as at 4.58 minute, correspondingly with runtime 7 min. The method's effectiveness has been validated using SANCO recommendations for LOD, robustness, accuracy, precision, linearity, selectivity and specificity. There are several analytical methods reported for individual content estimation, but single method is not available to determine simultaneous content. The developed method has been utilized to estimate pyrazosulfuron ethyl and pretilachlor content in industries.

New piperidinium surfactants with carbamate fragments as effective adjuvants in insecticide compositions based on imidacloprid.

Surfactants, particularly non-ionic ones, are widely used as adjuvants in pesticide formulations due to their ability to maintain pesticide effectiveness without changing solution properties, such as pH. While non-ionic surfactants are generally low-toxic, stable, and excellent dispersants with high solubilization capabilities, they may be less effective than cationic surfactants, which offer superior surface activity, transport properties, and antimicrobial action. This study investigates the efficacy of new piperidinium surfactants with carbamate fragments as adjuvants in insecticide formulations containing imidacloprid. The efficacy of these formulations is being assessed against greenhouse whitefly, a pest known to harm cultivated and ornamental flowering plants. The aggregation behavior of piperidinium surfactants containing carbamate fragments was investigated, and their wetting effect was evaluated. Synthesized surfactants have lower CMC values compared to their methylpiperidinium analogue. The effect of piperidinium surfactants on the insecticide concentration on the surface and inside tomato leaves was assessed using spectrophotometric methods. It was found that the introduction of piperidinium surfactants with carbamate fragment at a concentration of 0.1% wt. allows for decrease in lethal concentration of imidacloprid up to 10 times, thereby testifying the marked increase in the effectiveness of imidacloprid against the greenhouse whitefly insect pest (Trialeurodes vaporariorum). It was shown that the main factors responsible for the enhanced efficacy of the insecticide were the ability of the surfactant to increase the concentration of imidacloprid on the leaf surfaces and improve their penetration into the plant. The presented work employed a comprehensive approach, which significantly increases the generalizability of the results obtained and provides the ability to predict the effect and target selection of adjuvants. © 2024 Society of Chemical Industry.

Surface dissipation and foliar penetration of acetamiprid on tea leaves in the presence or absence of adjuvants

This study is to investigate the surface dissipation and foliar penetration of acetamiprid following application to live tea plants in the presence and absence of two adjuvants (Alligare 90® and Peptoil®). SERS mapping protocol with a self-assembled AuNP mirror as substrates was utilized for in situ and real time pesticide analysis. The surface dissipation analysis showed that acetamiprid with Alligare 90® had the lowest dissipation rate (34%) compared to acetamiprid alone (60%) or with Peptoil® (44%), indicating the addition of Alligare 90® was more effective in reducing the surface dissipation of acetamiprid than Peptoil®. The study also investigated the foliar penetration of acetamiprid into tea leaves with and without adjuvants using SERS and LC-MS/MS. The study concludes that the two adjuvants tested can enhance spreadability, surface stability, and foliar penetration of acetamiprid applied on tea leaves. The information will facilitate the development and application of efficient and safe pesticide formulations.

Fabrication of thermo-responsive microcapsule pesticide delivery system from maleic anhydride-functionalized cellulose nanocrystals-stabilized pickering emulsion template

The overuse of pesticides has shown their malpractices. Novel and sustainable formulations have consequently attracted abundant attention but still appear to have drawbacks. Here, we use a maleic anhydride-functionalized cellulose nanocrystals-stabilized Pickering emulsions template to prepare thermo-responsive microcapsules for a pesticide delivery system via radical polymerization with N-isopropyl acrylamide. The microcapsules (MACNCs-g-NIPAM) are characterized by the microscope, SEM, FTIR, XRD, TG-DTG, and DSC techniques. Imidacloprid (IMI) is loaded on MACNCs-g-NIPAM to form smart release systems (IMI@MACNCs-g-NIPAM) with high encapsulation efficiency (~88.49%) and loading capability (~55.02%). The IMI@MACNCs-g-NIPAM present a significant thermo-responsiveness by comparing the release ratios at 35°C and 25°C (76.22% vs 50.78%). It also exhibits advantages in spreadability, retention and flush resistance on the leaf surface compared with the commercial IMI water-dispersible granules (CG). IMI@MACNCs-g-NIPAM also manifest a significant advantage over CG (11.12 mg/L vs 38.90 mg/L for LC50) regarding activity tests of targeted organisms. In addition, IMI@MACNCs-g-NIPAM has shown excellent biocompatibility and low toxicity. All the benefits mentioned above prove the excellent potential of IMI@MACNCs-g-NIPAM as a smart pesticide formulation.

Electro-generating Cu2+ ions based on electrochemically modified CPE for the determination of malathion pesticide using valid SW-ASV method

This work investigates the validation of the SW-ASV method for the determination of malathion organophosphorus pesticide based on an electrochemically modified (CPE) carbon paste electrode with copper metal. The surface of the modified CPE was constructed by electrodepositing the copper layer at the accumulation step in 1-mM CuSO4.5H2O, PBS at pH 6.6, E accumulation: − 0.8 V, and Taccumulation 240 s. The determining step was performed by adding different concentrations of malathion pesticide and applying the potential toward more positive potential at (− 0.8–+ 1.4 V) to enhance the oxidation of Cu0 metal. It was noticed that the malathion concentration gradient enhances the oxidation peak current of copper at + 0.03 V gradually. SW-ASV method validation was performed at a linearity range confined in (1–10 µM). An analytical curve was constructed and R2 was equal to 0.99995 with good fitted linear relationship. LOD and LOQ were calculated to be 0.0247 and 0.08236 µM, respectively. ANOVA for two sets of measurements using the standard gas chromatographic method and the suggested SW-ASV method was demonstrated via the calculations of F-value and t-value. F and t-values were calculated to be 1.698 and 0.289, respectively, which did not exceed the tabulated F and t-values resulting in the great similarity of results and ensuring the reliability of the suggested test method. This valid SW-ASV method was used to perform the routine analysis of the 95% technical grade and the pesticide formulation 57% emulsion concentrate of the malathion. Valid results were achieved with satisfactory limits of accuracy and precision.Graphical abstract

Fabrication of ionic liquid self-assemblies based on dicamba with improved herbicidal activity and reduced environmental risks

The off-target loss of pesticide formulations caused by volatilization and leaching has reduced effective utilization and increased risks to the ecological environment and human health. Self-assembly of pesticides has been widely concerned due to the improved bioactivity and environmental compatibility. Herbicidal ionic liquids (HILs) could effectively decrease off-target loss and increase efficacy and environmental safety by improving the physicochemical properties of herbicides. Herein, HILs were prepared by pairing dicamba with quaternary ammonium salts containing different alkyl chain lengths and aromatic groups and subsequently self-assembled into spherical nanoparticles (HIL NPs) via electrostatic interaction and hydrophobic effect. Compared with dicamba, the obtained HIL NPs with an average particle size of 6–55 nm exhibited improved physicochemical properties, including high zeta potential values (+20.3 to +27.8 mV), low volatilization rate (2.4–3.9 %) and surface tension (22.83–33.07 mN m−1), decreased contact angle (32.25–41.55°) and leaching potential (76.2–86.5 %), and high soil adsorption (12.1–23.8 %), suggesting low risks to the environment. The control efficacy against Amaranthus retroflexus of HIL3 NPs pairing dicamba with octadecyl-trimethyl ammonium chloride was better than that of dicamba sodium salt at different concentrations. Therefore, the ionic liquid self-assembly developed by a facile and green preparation approach to reduce the volatility and leaching of pesticides would have enormous potential in sustainable agriculture.

Invited Perspective: The Far Reach of PFAS-Inert Ingredients and Adjuvants in Pesticide Formulations.

Invited Perspective: The Far Reach of PFAS-Inert Ingredients and Adjuvants in Pesticide Formulations.

Pengaruh Jumlah Permintaan, Omzet dan Harga terhadap Jumlah Produksi Pestisida pada PT Dharma Guna Wibawa di Jawa Timur

PT Dharma Guna Wibawa sells superior agricultural products in the form of pesticides. Companies with the aim of improving the rural economy for the better. With this company promotion is more focused on rural areas. As a company, PT Dharma Guna Wibawa cannot allow its production system to be carried out without any goods coming out of the company as a turnover to be reprocessed into capital. If the production demand exceeds the company's capacity, it will have a negative impact when consumer demand is realized. The analytical method used in this study is multiple linear regression with the dependent variable the amount of production and the independent variables include the number of requests, turnover and prices. The results of the model analysis in this study state that the variables Amount of Demand (X1), Turnover (X2) and Price (X3) have an effect on the total production value. Partially the variable X1 or the number of requests has a significant influence, this is because the value or amount of production is determined from the number of requests received each month. The X2 variable or the amount of turnover has an influence on the production value. An interesting fact in this study is that the variable X3 or price does not significantly affect the production value.

До проблеми розробки методів аналізу формуляцій пестицидів, що містять багато діючих речовин і матриць

Abstract. Aim. An assessment of the necessity and expediency of developing and using methods of the analysis of pesticide formulations containing numerous active substances and matrices. Materials and Methods. A review of the methods of analysis of pesticide products by the Collaborative International Pesticides Analytical Council (CIPAC) and the methods of analysis of numerous pesticides developed under the joint FAO/IAEA Programme. Conclusions. Proposals on the continuation of the CIPAC analysis methods application in national body decision-making process regarding the registration of pesticide formulations for their use in agricultural practice have been formulated. The methods of analysis of numerous pesticides should be used by national laboratories that control the quality of pesticide products. Keywords: pesticides, pesticide formulation, technical substance, active substance, multiple residues in food products, multiple residues determination methods.

Chronic effects of commercial pesticide preparations on biomarkers and reproductive success in earthworm Eisenia andrei

Chemical pollution resulting from pesticide usage has been a continuous issue since the 1960s, despite comprehensive European Union legislation designed to safeguard human health and the environment from the adverse effects of pesticides. While regulatory risk assessments primarily focus on the active ingredients, recent research indicates ecotoxicological impacts of commercial preparations on non-target organisms, particularly within the soil ecosystem where key species such as earthworms play a vital role in maintaining soil quality and fertility. Therefore, the aim of this study was the assessment of the long-term effects of the following respective commercial preparations: the insecticides Sumialfa (esfenvalerate) and Calypso (thiacloprid), as well as the herbicides Frontier (dimethenamid-p) and Filon (prosulfocarb) on the earthworm Eisenia andrei in standardized soil during long-term exposures of 7, 14, and 28 days. To study the possible effects on different levels of biological organization, enzymatic biomarkers: acetylcholinesterase (AChE), carboxylesterase (CES) glutathione S-transferase (GST), glutathione reductase (GR), glutathione peroxidase (GPx); non-enzymatic biomarkers: multixenobiotic resistance activity (MXR), levels of glutathione (GSH), and reactive oxygen species (ROS) as well as reproductive success were investigated. While Calypso appeared to be the least toxic substance, all pesticides showed significant effect on multiobiomarker response in E. fetida. That being said, the response of MXR activity was significantly altered by all tested pesticides indicating MXR being the most sensitive endpoint of the present research. Recovery of MXR was observed after 28 days, however, only in case of exposure to Filon, while the recovery of CAT activity was recorded after 28 days as well, subsequent to Sumialfa exposure. Reproductive success was negatively impacted regarding the Frontier and Sumialfa exposure at the highest concentration (100 mg/kg) reflected in reduced number of cocoons, while only the exposure to Frontier (100 mg/kg) reduced the number of juveniles. Based on the results, it is important to include commercial pesticide formulations in pesticide risk assessments. The toxicity classifications of the studied pesticides suggest the potential detrimental consequences to the key soil species in terrestrial ecosystems at various concentrations. Future studies should include other soil species as well as investigation of higher levels of biological organization, i.e., behavioral endpoints, to determine the potential risks to terrestrial ecosystems.

Maleic anhydride-functionalized cellulose nanocrystal-stabilized high internal phase Pickering emulsion for pesticide delivery

The salt-responsiveness of Pickering emulsions has significantly influenced their applications due to the large amount of salt on the surface of plant leaves. The present study provided a maleic anhydride-functionalized cellulose nanocrystal-stabilized high internal phase Pickering emulsion (MACNCs-HIPPEs) that was stable to high-concentration salt and used for pesticide delivery. The stability of MACNCs-HIPPEs was investigated by adjusting the oil-phase volume fraction (φ), the MACNCs concentration, NaCl dosages, and the rheological properties. The high internal phase Pickering emulsion was obtained at φ of 0.8 and MACNCs concentration of 2wt% and showed excellent salt stability (NaCl, 1200 mM) and significant storage stability (60 days). The sustained release of imidacloprid (IMI) from imidacloprid-loaded MACNCs-HIPPEs (IMI@MACNCs-HIPPEs) showed a positive correlation to the temperature (15°C, 25°C, 35°C), indicating clear thermo-responsiveness of the prepared pesticide formulation. The test of spread and retention of IMI@MACNCs-HIPPEs on the leaf surface showed a significant advantage compared with the commercial IMI water dispersible granules (CG). All the advantages mentioned above showed the excellent potential of the MACNCs-HIPPEs in delivering lipophilic pesticides.

The effect of formulation composition and adjuvant type on difenoconazole dislodgeable foliar residue

Rigorous risk assessments for those exposed to pesticides are carried out to satisfy crop protection regulatory requirements. Non-dietary risk assessments involve estimating the amount of residue which can be transferred from plant foliage to the skin or clothes, known as dislodgeable foliar residues (DFRs). DFR data are less available than crop residue data as studies are costly and limited by seasonality. European regulatory authorities are reticent to allow extrapolation of study data to different scenarios as the contributory factors have hitherto been poorly identified. This study is the first to use a new laboratory DFR method to investigate how one such factor, pesticide formulation, may affect DFR on a variety of crops. The study used the active substance difenoconazole as both an emulsifiable concentrate (EC 10%) and a wettable powder (WP 10%) with and without adjuvants (Tween 20 and organophosphate tris(2-ethylhexyl)phosphate TEHP) on tomato, French bean and oilseed rape. A comparable DFR% was retained from the WP and EC formulation on most crops except for tomato, where lower DFR% was retained in the case of WP (39 ± 4.7%) compared to EC (60 ± 1.2%). No significant effect of adjuvant addition was observed for either formulation except when mixing TEHP (0.1% w/v) to the EC 10% on French bean, resulting in 8% DFR reduction compared to the EC formulation alone. This research demonstrates the value of a unique DFR laboratory technique in investigating the importance of the formulation and in-tank adjuvants as factors that affect DFR.

Simulation and application assessment of the efficacy of fosthiazate-loaded microcapsules against root-knot nematode.

Although microencapsulation technology is an effective pesticide formulation method, the correlation between the release properties of microcapsules and pesticide concentrations in soil and their efficacy has not been thoroughly investigated. Here, the effects of the release properties of the nematicide Fosthiazate (FTZ) from microcapsules on their efficacy against the nematode Meloidogyne incognita were examined using experimental and mathematical approaches. Gradual release of FTZ from both polyurea microcapsules (PU-MC) and melamine-formaldehyde microcapsules (MF-MC) was observed over 30 days in the release test, and each release curve was completely distinct. In the biological test, the efficacy of both microcapsules against M. incognita 42 days after the application was 8-15% higher than that of the non-encapsulated FTZ at a concentration of 2.0 mg FTZ kg-1 soil. Soil degradation experiments suggested that the microcapsules worked effectively to protect the FTZ from degradation, which resulted in higher efficacy at a later stage. A simulation study to predict the concentration of FTZ outside the microcapsule found that the timing of supplying FTZ was important and suggested that the mixture of non-encapsulated FTZ (non-MC) and MF-MC showed enhanced efficiency for the entire cultivation period in the biological test; the efficacy against nematodes was also confirmed by the measurement of nematode density using the Bearman funnel method. The release properties of FTZ from microcapsules are critical for their effective application against M. incognita, and the established simulation study is a useful step in designing suitable release properties under complex soil conditions. © 2024 Society of Chemical Industry.

Carrier-free self-assembled nanoparticles based on prochloraz and fenhexamid for reducing toxicity to aquatic organism

Nanoformulations of pesticides are an effective way to increase utilization efficiency and alleviate the adverse impacts on the environments caused by conventional pesticide formulations. However, the complex preparation process, high cost, and potential environmental risk of nanocarriers severely restricted practical applications of carrier-based pesticide nanoformulations in agriculture. Herein, carrier-free self-assembled nanoparticles (FHA-PRO NPs) based on fenhexamid (FHA) and prochloraz (PRO) were developed by a facile co-assembly strategy to improve utilization efficiency and reduce toxicity to aquatic organism of pesticides. The results showed that noncovalent interactions between negatively charged FHA and positively charged PRO led to core-shell structured nanoparticles arranged in an orderly manner dispersing in aqueous solution with a diameter of 256 nm. The prepared FHA-PRO NPs showed a typical pH-responsive release profile and exhibited excellent physicochemical properties including low surface tension and high max retention. The photostability of FHA-PRO NPs was improved 2.4 times compared with free PRO. The FHA-PRO NPs displayed superior fungicidal activity against Sclerotinia sclerotiorum and Botrytis cinerea and longer duration against Sclerotinia sclerotiorum on potted rapeseed plants. Additionally, the FHA-PRO NPs reduced the acute toxicity of PRO to zebrafish significantly. Therefore, this work provided a promising strategy to develop nanoformulations of pesticides with stimuli-responsive controlled release characteristics for precise pesticide delivery.

Spherical Assembly of Halloysite Clay Nanotubes as a General Reservoir of Hydrophobic Pesticides for pH-Responsive Management of Pests and Weeds.

The development of smart systems for pesticidal delivery presents a significant advancement in enhancing the utilization efficiency of pesticides and mitigating environmental risks. Here an acid-responsive pesticidal delivery system using microspheres formed by the self-assembly of halloysite clay nanotubes (HNTs) is proposed. Insecticide avermectin (AVM) and herbicide prometryn (PMT) are used as two models of hydrophobic pesticide and encapsulated within the porous microspheres, followed by a coating of tannic acid/iron (TA/FeIII) complex films to generate two controlled-release pesticides, named as HCEAT and HCEPT, resulting in the loading capacity of AVM and PMT being 113.3 and 120.3mgg-1, respectively. Both HCEAT and HCEPT exhibit responsiveness to weak acid, achieving 24h-release ratios of 85.8% and 80.5% at a pH of 5.5. The experiment and simulation results indicate that the coordination interaction between EDTA2- and Ca2+ facilitates the spherical aggregation of HNTs. Furthermore, these novel pesticide formulations demonstrate better resistance against ultraviolet (UV) irradiation, higher foliar affinity, and less leaching effect, with negligible impact of the carrier material on plants and terrestrial organisms. This work presents a promising approach toward the development of efficient and eco-friendly pesticide formulations, greatly contributing to the sustainable advancement of agriculture.

Microbial pesticides – challenges and future perspectives for testing and safety assessment with respect to human health

Plant protection measures are necessary to prevent pests and diseases from attacking and destroying crop plants and to meet consumer demands for agricultural produce. In the last decades the use of chemical pesticides has largely increased. Farmers are looking for alternatives. Biopesticides should be considered a sustainable solution. They may be less toxic than chemical pesticides, be very specific to the target pest, decompose quickly, and be less likely to cause resistance. On the other hand, lower efficacy and higher costs are two disadvantages of many biopesticides. Biopesticides include macroorganisms, natural compounds and microorganisms. Microbial pesticides are the most widely used and studied class of biopesticides. The greatest difference between microbial and chemical pesticides is the ability of the former to potentially multiply in the environment and on the crop plant after application. The data requirements for the European Union and the United States Environmental Protection Agency are highlighted, as these regulatory processes are the most followed in regions where local regulations for biopesticide products are not available or vague. New Approach Methods already proposed or harmonized for chemical pesticides are presented and discussed with respect to their use in evaluating microbial pesticide formulations. Evaluating the microbials themselves is not as simple as using the same validated New Approach Methods as for synthetic pesticides. Therefore, the authors suggest considering New Approach Method strategies specifically for microbials and global harmonization with acceptability with the advancements of such approaches. Further discussion is needed and greatly appreciated by the experts.