Formation Of Tubular Structures Research Articles

Platelet-Rich Plasma/Chitosan/Chondroitin sulfate immunomodulatory hydrogel Co-Networks for diabetic wound Repair: Functions and molecular mechanisms

Diabetic wound healing encounters numerous challenges including bacterial infection, macrophage dysfunction, excessive inflammation, and oxidative stress, causing delays in the overlapping processes of inflammation, proliferation, and remodeling and thus imposing a high burden on patients. Platelet-rich plasma (PRP) has demonstrated significant potential for diabetic wound treatment by promoting granulation tissue formation, collagen deposition, re-epithelialization, and angiogenesis. However, the underlying molecular and cellular mechanisms remain unclear. Here, immunomodulatory hydrogel co-networks based on PRP, with strong hemostatic, antibacterial, and free radical scavenging effects, are developed for diabetic wound treatment. In vitro and in vivo, the hydrogels can reduce endothelial cell apoptosis and promote tube formation by regulating the oxidative stress microenvironment. For anti-inflammatory and tissue repair, the hydrogels can facilitate the M2 macrophage polarization by inhibiting phosphorylation of p-IκBα and p-P65 in the NF-κB signaling pathway. Through increasing the expression of key angiogenic factors (HIF-1α, VEGF, and FGF2), the hydrogels can significantly promote angiogenesis and the formation of endothelial cell tubular structures. These findings offer new insight into the synergistic regulatory contributions of the PRP-based therapy throughout multiple stages of healing, thereby establishing a biomolecular and cellular foundation for advanced diabetic wound management.

Co-clustering of EphB6 and ephrinB1 in trans restrains cancer cell invasion

EphB6 is an understudied ephrin receptor tyrosine pseudokinase that is downregulated in multiple types of metastatic cancers. Unlike its kinase-active counterparts which autophosphorylate and transmit signals upon intercellular interaction, little is known about how EphB6 functions in the absence of intrinsic kinase activity. Here, we unveil a molecular mechanism of cell-cell interaction driven by EphB6. We identify ephrinB1 as a cognate ligand of EphB6 and show that in trans interaction of EphB6 with ephrinB1 on neighboring cells leads to the formation of large co-clusters at the plasma membrane. These co-clusters exhibit a decreased propensity towards endocytosis, suggesting a unique characteristic for this type of cell-cell interaction. Using lattice light-sheet microscopy, 3D structured illumination microscopy and cryo-electron tomography techniques, we show that co-clustering of EphB6 and ephrinB1 promotes the formation of double-membrane tubular structures between cells. Importantly, we also demonstrate that these intercellular structures stabilize cell–cell adhesion, leading to a reduction in the invasive behavior of cancer cells. Our findings rationalize a role for EphB6 pseudokinase as a tumor suppressor when interacting with its ligands in trans.

Multifunctional Hydrogel of Recombinant Humanized Collagen Loaded with MSCs and MnO2 Accelerates Chronic Diabetic Wound Healing.

Chronic wound repair is a clinical treatment challenge. The development of multifunctional hydrogels is of great significance in the key aspects of treating chronic wounds, including reducing oxidative stress, promoting angiogenesis, and improving the natural remodeling of extracellular matrix and immune regulation. In this study, we prepared a composite hydrogel, sodium alginate (SA)@MnO2/recombinant humanized collagen III (RHC)/mesenchymal stem cells (MSCs), composed of SA, MnO2 nanoparticles, RHC, and MSCs. The hydrogel has high mechanical properties and good biocompatibility. In vitro, SA@MnO2/RHC/MSCs hydrogel effectively enhanced the formation of intricate tubular structures and angiogenesis and showed synergistic effects on cell proliferation and migration. In vivo, the SA@MnO2/RHC/MSCs hydrogel enhanced diabetes wound healing, rapid re-epithelization, favorable collagen deposition, and abundant wound angiogenesis. These findings demonstrated that the combined effects of SA, MnO2, RHC, and MSCs synergistically accelerate healing, resulting in a reduced healing time. These observed healing effects demonstrated the potential of this multifunctional hydrogel to transform chronic wound care and improve patient outcomes.

Vascular mimicry in zebrafish fin regeneration: how macrophages build new blood vessels

Vascular mimicry has been thoroughly investigated in tumor angiogenesis. In this study, we demonstrate for the first time that a process closely resembling tumor vascular mimicry is present during physiological blood vessel formation in tissue regeneration using the zebrafish fin regeneration assay. At the fin-regenerating front, vasculature is formed by mosaic blood vessels with endothelial-like cells possessing the morphological phenotype of a macrophage and co-expressing both endothelial and macrophage markers within single cells. Our data demonstrate that the vascular segments of the regenerating tissue expand, in part, through the transformation of adjacent macrophages into endothelial-like cells, forming functional, perfused channels and contributing to the de novo formation of microvasculature. Inhibiting the formation of tubular vascular-like structures by CVM-1118 prevents vascular mimicry and network formation resulting in a 70% shorter regeneration area with 60% reduced vessel growth and a complete absence of any signs of regeneration in half of the fin area. Additionally, this is associated with a significant reduction in macrophages. Furthermore, depleting macrophages using macrophage inhibitor PLX-3397, results in impaired tissue regeneration and blood vessel formation, namely a reduction in the regeneration area and vessel network by 75% in comparison to controls.

Enhancing electrochemical carbon dioxide reduction efficiency through heat-induced metamorphosis of copper nanowires into copper oxide/copper nanotubes with tunable surface

Electrochemical CO2 reduction reaction (CO2RR) presents a unique opportunity to convert carbon dioxide (CO2) to value-added products while simultaneously storing renewable energy in the form of chemical energy. However, particle applications of this technology are limited due to the poor efficiency and product selectivity of the existing catalyst. In this study, we demonstrate a facile method for the heat-induced transformation of copper nanowires into CuOx/Cu nanotubes with defect-enriched surfaces. During this transformation, the outward migration of copper results in the formation of tubular structures encased within nanosized oxide grains. Notably, the hydrogen faradaic efficiency (FE) decreases with extended heat treatment, while carbon monoxide (CO) FE increases. As compared to Cu NWs, Cu NTs exhibit lower selectivity towards H2 and single-carbon (C1) products and favor the formation of multi-carbon (C2+) products. Consequently, a 2-fold increase in the single pass CO2 conversion (SPCC) and C2+ half-cell energy efficiency (EEhalf cell) was noted after heat treatment. The Cu NT-4 variant, synthesized under optimized conditions, exhibits the highest FE of 72.1 % for C2+ products at an operating current density (ID) of 500 mA cm−2.

A facile synthesis of coral tubular g-C3N4 for photocatalytic degradation RhB and CO2 reduction

Photocatalysis is an ecofriendly technique that emerged as a promising alternative for solar-to-clean energy conversion and pollutant degradation. Such g-C3N4 have demonstrated chemical stability and proper band position but with low specific surface area, limited light absorption, and easy recombination of photo-generated carriers. In this paper, we report on the successful synthesis of coral tubular g-C3N4 photocatalyst using a supramolecular-based approach. Among the as-synthesized samples, M1C2 (melamine-to-cyanuric acid molar ratio of 1:2) exhibited the best photocatalytic performance. The apparent rate constant of RhB degradation was 1.53 times greater than that of M1C0 (pure melamine), and the yield of CO is about 3 times higher than that of M1C0 during CO2 reduction. The formation of tubular structures increased the specific surface area and reduced the recombination efficiency of electron-hole pairs. Moreover, the position of the conduction band became more negative, generating more radicals that accelerated the process of photocatalysis. This work offered a practical and achievable approach to creating superior g-C3N4 and facilitating its application in diverse fields.

Tumor-expressed B7-H3 promotes vasculogenic mimicry formation rather than angiogenesis in non-small cell lung cancer.

Vasculogenic mimicry (VM), an alternative microvascular circulation independent ofangiogenesis, is formed by aggressive cancer cells. Tumor-expressedB7-H3 has been reported to promote VM formation in hepatocellular carcinoma and modulate angiogenesis in breast cancer and colorectal cancer. However, its effects on VM generation and angiogenesis in non-small cell Lung cancer (NSCLC) remained to be elucidated. CRISPR/Cas9-mediated B7-H3 knockout (KO)was conducted in NSCLC A549 and H3255 cells. The expression of VM-related proteins, including vascular endothelial (VE)-cadherin and matrix metalloproteinase 14 (MMP14), and the secretion of vascular endothelial growth factor (VEGF) were measured by western blotting and chemiluminescence assay in both B7-H3 KO and mock-edited A549 and H3255 cells. To examine VM formation, a three-dimensional (3D)culture model was used for B7-H3 KO and mock A549 and H3255 cells. For in vivo analysis, xenograft mice models were established using B7-H3 KO and mock-edited A549 cells, and immunohistochemical (CD31) and histochemical (periodic acid-Schiff, PAS) double staining were performed to identify VM and endothelial vessels in tumor tissues. Finally, specific signaling inhibitors were used to analyze B7-H3-induced signaling pathway responsible for VE-cadherin and MMP14 expression and VM generation. Higher expression of B7-H3 was associated with a worse prognosis and moreadvanced T-category in NSCLC. CRISPR/Cas9-mediated B7-H3 KOin A549 and H3255 cells led to decreased expression of VE-cadherin and MMP14; however,the secretion of VEGFby the two cell lines remained unchanged. In the3D cell culture model, bothB7-H3 KO A549 and H3255cells showed a significant reduction in the formation of capillary-like tubular structures compared to mock-edited cells. In thein vivo xenograft model, mock-edited A549 cells formed excessive PAS+ CD31-VM channels, while B7-H3 KO restrained VM formation in the xenograft tumors. However, no significant differenceswere found in CD31+ endothelial vessels between xenografts formed by B7-H3 KO and mock-edited A549 cells. Finally, we analyzed the signaling pathway responsible for B7-H3-induced VM formation and found that selective inhibition of the phosphoinositide 3-kinase(PI3K)/protein kinase B(AKT) hyperactivation by LY294002 was associated with decreased expression of MMP14 and VE-cadherin, and in vitro VM formation by both A549 and H3255 cells. Tumor-expressed B7-H3 acts via PI3K/AKT signaling pathway to promote VM formation by NSCLC cells while bears no effects on angiogenesis in NSCLC.

Thymosin α1 interacts with Galectin-1 modulating the β-galactosides affinity and inducing alteration in the biological activity.

The study of mechanism of action of Thymosin alpha 1 (Tα1) and the basis of the pleiotropic effect in health and disease, is one of the main focus of our ongoing research. Tα1 is a thymic peptide that demonstrates a peculiar ability to restore homeostasis in different physiological and pathological conditions (i.e., infections, cancer, immunodeficiency, vaccination, and aging) acting as multitasking protein depending on the host state of inflammation or immune dysfunction. However, few are the information about mechanisms of action mediated by specific Tα1-target protein interaction that could explain its pleiotropic effect. We investigated the interaction of Tα1 with Galectin-1 (Gal-1), a protein belonging to an oligosaccharide binding protein family involved in a variety of biological and pathological processes, including immunoregulation, infections, cancer progression and aggressiveness. Using molecular and cellular methodological approaches, we demonstrated the interaction between these two proteins. Tα1 specifically inhibited the hemagglutination activity of Gal-1, the Gal-1 dependent in vitro formation of endothelial cell tubular structures, and the migration of cancer cells in wound healing assay. Physico-chemical methods revealed the details of the molecular interaction of Tα1 with Gal-1. Hence, the study allowed the identification of the not known until now specific interaction between Tα1 and Gal-1, and unraveled a novel mechanism of action of Tα1 that could support understanding of its pleiotropic activity.

Microperfusion cell culture system for promoted cell growth using non-thermal atmospheric pressure plasma exposure

Promoting cell growth is demanded in various applications, such as drug screening and regenerative medicine. Recently, non-thermal atmospheric pressure plasma (NTAPP), which can generate reactive oxygen and nitrogen species under atmospheric conditions, has been used to promote cell growth. In this study, microperfusion systems using the stimulation of NTAPP exposure were developed to induce cell growth. NTAPP was generated through the dielectric barrier discharge method. When NTAPP exposure was applied to pure water for 4 min, concentrations of nitrate, nitrite, and hydrogen peroxide reached 250, 20, and 0.5 mg l−1, respectively. Further, C2C12 murine myoblast cells were injected into the microperfusion system, stimulated with NTAPP exposure, and cultured for 3 d. Then, the liquid medium was changed to initiate cell differentiation. The formation of tubular structures was observed after incubation for 3 d.

Vps9d1 regulates tubular endosome formation through specific activation of Rab22A.

The small GTPase Rab22A is an important regulator of the formation of tubular endosomes, which are one of the types of recycling endosome compartments of the clathrin-independent endocytosis pathway. In order to regulate tubular endosome formation, Rab22A must be activated by a specific guanine-nucleotide-exchange factor (GEF); however, all of the GEFs that have been reported to exhibit Rab22A-GEF activity in vitro also activate Rab5A, an essential regulator of the clathrin-mediated endocytosis pathway, and no Rab22A-specific GEF has ever been identified. Here, we identified Vps9d1, a previously uncharacterized vacuolar protein sorting 9 (VPS9) domain-containing protein, as a novel Rab22A-GEF. The formation of tubular endosome structures was found to be severely impaired in Vps9d1-depleted HeLa cells, but Rab5A localization was unaffected. Expression of a constitutively active Rab22A mutant in Vps9d1-depleted HeLa cells restored tubular endosomes, but expression of a GEF-activity-deficient Vps9d1 mutant did not. Moreover, Vps9d1 depletion altered the distribution of clathrin-independent endocytosed cargos and impaired their recycling. Our findings indicate that Vps9d1 promotes tubular endosome formation by specifically activating Rab22A.

Tripartite motif-containing protein 32 regulates Ca2+ movement in skeletal muscle.

Mutations in tripartite motif-containing protein 32 (TRIM32), especially in NHL repeats, have been found in skeletal muscle in patients with type 2H limb-girdle muscular dystrophy (LGMD2H). However, the roles of the NHL repeats of TRIM32 in skeletal muscle functions have not been well addressed. In the present study, to examine the functional role(s) of the TRIM32 NHL repeats in skeletal muscle, TRIM32-binding proteins in skeletal muscle were first searched using a binding assay and MALDI-TOF/TOF. Sarcoplasmic/endoplasmic reticulum Ca2+-ATPase 1a (SERCA1a) was found to be a TRIM32-binding protein. Next, a deletion mutant of TRIM32 missing the NHL repeats (NHL-Del) was expressed in mouse primary skeletal myotubes during myoblast differentiation into myotubes. Ca2+ movement in the myotubes was examined using single-cell Ca2+ imaging. Unlike wild-type (WT) TRIM32, NHL-Del did not enhance the amount of Ca2+ release from the sarcoplasmic reticulum (SR), Ca2+ release for excitation-contraction (EC) coupling, or extracellular Ca2+ entry via store-operated Ca2+ entry (SOCE). In addition, even compared with the vector control, NHL-Del resulted in reduced SOCE due to reduced expression of extracellular Ca2+ entry channels. Transmission electron microscopy (TEM) observation of the myotubes revealed that NHL-Del induced the formation of abnormal vacuoles and tubular structures in the cytosol. Therefore, by binding to SERCA1a via its NHL repeats, TRIM32 may participate in the regulation of Ca2+ movement for skeletal muscle contraction and the formation of cellular vacuoles and tubular structures in skeletal muscle. Functional defects in TRIM32 due to mutations in NHL repeats may be pathogenic toward LGMD2H.

4D Biofabrication of T‐Shaped Vascular Bifurcation

Abstract4D Biofabrication – a pioneering biofabrication technique – involves the automated fabrication of 3D constructs that are dynamic and show shape‐transformation capability. Although current 4D biofabrication methods are highly promising for the fabrication of vascular elements such as tubes, the fabrication of tubular junctions is still highly challenging. Here, for the first time, a 4D biofabrication‐based concept for the fabrication of a T‐shaped vascular bifurcation using 3D printed shape‐changing layers based on a mathematical model is reported. The formation of tubular structures with various diameters is achieved by precisely controlling the parameters (e.g. crosslinking time). Consequently, the 3D printed films show self‐transformation into a T‐junction upon immersion in water with a diameter of a few millimeters. Perfusion of the tubular T‐junction with an aqueous medium simulating blood flow through vessels shows minimal leakages with a maximum flow velocity of 0.11 m s–1. Furthermore, human umbilical vein endothelial cells seeded on the inner surface of the plain T‐junction show outstanding growth properties and excellent cell viability. The achieved diameters are comparable to the native blood vessels, which is still a challenge in 3D biofabrication. This approach paves the way for the fabrication of fully automatic self‐actuated vascular bifurcations as vascular grafts.

N4BP3 promotes angiogenesis in hepatocellular carcinoma by binding with KAT2B.

Although angiogenesis is a critical event in hepatocellular carcinoma (HCC), and this process provides the tumor with sufficient oxygen and nutrients, the precise molecular mechanism by which it occurs is not fully understood. NEDD4 binding protein 3 (N4BP3) was identified in this study as a novel pro‐angiogenic factor in HCC cell lines and tissues. We discovered that N4BP3 was significantly expressed in HCC and that its level of expression was positively correlated with the density of tumor microvessels in HCC tissues. Cell biology experiments have shown that N4BP3 knockdown in HCC cells significantly inhibits the formation of complete tubular structures by HUVECs in vitro and HCC angiogenesis in vivo. In HCC cells, overexpression of N4BP3 has the opposite effects. Further cell and molecular biology experiments have revealed that N4BP3 interacts with KAT2B (lysine acetyltransferase 2B), increasing signal transducer and activator of transcription 3 (STAT3) expression by regulating the distribution of acetyl‐histone H3 (Lys27) (H3K27ac) in its promoter region. This, in addition, regulates the activity of the STAT3 signaling pathway, which promotes the proliferation of microvessels in HCC and accelerates the malignant process of the tumor. In vivo experiments in nude mice have confirmed our findings, and also suggested that N4BP3 could be a potential target for the treatment of HCC in combination with sorafenib.

Establishment and biological effect evaluation of prevascularized porous β-tricalcium phosphate tissue engineered bone

To evaluate the biological effect on vascularization during bone repair of prevascularized porous β-tricalcium phosphate (β-TCP) tissue engineered bone (hereinafter referred to as prevascularized tissue engineered bone), which was established by co-culture of endothelial progenitor cells (EPCs) and bone marrow mesenchymal stem cells (BMSCs) based on tissue engineering technology. EPCs and BMSCs were isolated from iliac bone marrow of New Zealand white rabbits by density gradient centrifugation and differential adhesion method. The cells were identified by immunophenotypic detection, BMSCs-induced differentiation, and EPCs phagocytosis. After identification, the third-generation cells were selected for subsequent experiments. First, in vitro tubule formation in EPCs/BMSCs direct contact co-culture (EPCs/BMSCs group) was detected by Matrigel tubule formation assay and single EPCs (EPCs group) as control. Then, the prevascularized tissue engineered bone were established by co-culture of EPCs/BMSCs in porous β-TCP scaffolds for 7 days (EPCs/BMSCs group), taking EPCs in porous β-TCP scaffolds as a control (EPCs group). Scanning electron microscopy and laser scanning confocal microscopy were used to observe the adhesion, proliferation, and tube formation of cells. Femoral condyle defect models of 12 New Zealand white rabbits were used for implantation of prevascularized tissue engineered bone as the experimental group ( n=6) and porous β-TCP scaffold as the control group ( n=6). The process of vascularization of β-TCP scaffolds were observed. The numbers, diameter, and area fraction of neovascularization were quantitatively evaluated by Microfill perfusion, Micro-CT scanning, and vascular imaging under fluorescence at 4 and 8 weeks. The isolated cells were BMSCs and EPCs through identification. EPCs/BMSCs co-culture gradually formed tubular structure. The number of tubules and branches, and the total length of tubules formed in the EPCs/BMSCs group were significantly more than those in the EPCs group on Matrigel ( P<0.05) after 6 hours. After implanting and culturing in porous β-TCP scaffold for 7 days, EPCs formed cell membrane structure and attached to the material in EPCs group, and the cells attached more tightly, cell layers were thicker, the number of cells and the formation of tubular structures were significantly more in the EPCs/BMSCs group than in the EPCs group. At 4 weeks after implantation, neovascularization was observed in both groups. At 8 weeks, remodeling of neovascularization occurred in both groups. The number, diameter, and area fraction of neovascularization in the experimental group were higher than those in the control group ( P<0.05), except for area fraction at 4 weeks after implantation ( P>0.05). The prevascularized tissue engineered bone based on direct contact co-culture of BMSCs and EPCs can significantly promote the early vascularization process during bone defects repair.

Gelatin Methacryloyl (GelMA) as a Suitable Three‐Dimensional Extracellular Environment for the Derivation of hiPSC‐Derived Kidney Organoids

The generation of human induced pluripotent stem cell (hiPSC)‐derived kidney organoids have facilitated novel insights into renal developmental processes and have the potential to provide personalised treatment strategies for patients with end‐stage renal disease. Traditional protocols for the directed differentiation of hiPSC‐derived kidney organoids have predominantly focused on biochemical cues to specify hiPSCs towards a mesonephric lineage, but have not considered the influence of the surrounding biophysical properties of the extracellular environment on organoid formation. We hypothesised that Gelatin methacryloyl (GelMA), a derivative of collagen with mechanically amendable hydrogel stiffness profiles, could be used to investigate the influence of extracellular matrix stiffness on kidney organoid specification. hiPSC‐derived kidney organoids were differentiated within photo‐crosslinked GelMA hydrogels of defined mechanical strengths. Enrichment of renal cell types in response to the various mechanical microenvironments was subsequently investigated using immunocytochemistry, qRT‐PCR, transmission electron microscopy (TEM) and histological staining methods. Rheological analysis of formulated hydrogels confirmed the generation of matrices with distinct stiffness (Young’s Modulus, G’) profiles. Hydrogels comparable to the stiffness of the gastrulation‐stage embryo (G’ = 400 Pa) and adult human kidney tissue (G’ = 5‐8 kPa) were generated. Importantly, the mechanical properties of the hydrogels showed remarkable stability even with prolonged time in culture. PCNA proliferation and cleaved caspase‐3 apoptotic staining of organoids embedded within scaffolds demonstrated high cell proliferation and viability in the hydrogel conditions by day 24 of differentiation. The formation of glomerular, proximal tubular and distal tubular structures, supported by basement membrane and interstitial cells were confirmed in conditions using immunofluorescent imaging. Interestingly, qRT‐PCR analysis revealed significant upregulation of nephron‐associated genes (including PAX8, NPHS2, NPHS1, SLC3A1 and AQP1) in organoids differentiated within extracellular environments that approximated adult human kidney tissue, when compared to organoids differentiated within the much softer microenvironments. Our results illustrate the influence of the extracellular environment on appropriate cell fate determination and propose GelMA hydrogels as faithful extracellular supports for the specification of hiPSC‐derived kidney organoids.

Formation of tubular structures and microneedles on silicon surface by doughnut-shaped ultrashort laser pulses

We report on the formation of tubular structures and microneedles on the surface of monocrystalline silicon using ultrashort laser pulses. Highly deterministic surface processing is ensured by single-shot ablative modification of the sample surface using radially polarized doughnut-shaped laser pulses with duration of 70 fs. Under such conditions, well reproducible tubular structures are formed whose height is rising with increasing fluence, culminating by closing the structure on the top with formation of a microneedle with a cavity in its base. Upon multi-pulsed irradiation, the height of the needle structures can further increase as compared to those produced by single pulses and top part of the structure is flattened. However, at a certain number of pulses, melting and ablation cause collapsing the entire structure. The mechanisms responsible for creating the tubular and needle structures are discussed based on the careful analysis of the experimental observations. The generated silicon microtubes and needles can find applications in various fields, such as intracellular delivery of micromolecules, micro/electromechanical systems, photovoltaic devices and silicon-based photonics.

Synthesis of Finite Molecular Nanotubes by Connecting Axially Functionalized Macrocycles

Synthesis of Finite Molecular Nanotubes by Connecting Axially Functionalized Macrocycles

Two Is Company, but Four Is a Party—Challenges of Tetraploidization for Cell Wall Dynamics and Efficient Tip-Growth in Pollen

Some cells grow by an intricately coordinated process called tip-growth, which allows the formation of long tubular structures by a remarkable increase in cell surface-to-volume ratio and cell expansion across vast distances. On a broad evolutionary scale, tip-growth has been extraordinarily successful, as indicated by its recurrent ‘re-discovery’ throughout evolutionary time in all major land plant taxa which allowed for the functional diversification of tip-growing cell types across gametophytic and sporophytic life-phases. All major land plant lineages have experienced (recurrent) polyploidization events and subsequent re-diploidization that may have positively contributed to plant adaptive evolutionary processes. How individual cells respond to genome-doubling on a shorter evolutionary scale has not been addressed as elaborately. Nevertheless, it is clear that when polyploids first form, they face numerous important challenges that must be overcome for lineages to persist. Evidence in the literature suggests that tip-growth is one of those processes. Here, I discuss the literature to present hypotheses about how polyploidization events may challenge efficient tip-growth and strategies which may overcome them: I first review the complex and multi-layered processes by which tip-growing cells maintain their cell wall integrity and steady growth. I will then discuss how they may be affected by the cellular changes that accompany genome-doubling. Finally, I will depict possible mechanisms polyploid plants may evolve to compensate for the effects caused by genome-doubling to regain diploid-like growth, particularly focusing on cell wall dynamics and the subcellular machinery they are controlled by.

Hierarchical Self-Assembly of Metal-Ion-Modulated Chitosan Tubules.

Soft materials such as gels or biological tissues can develop via self-assembly under chemo-mechanical forces. Here, we report the instantaneous formation of soft tubular structures with a two-level hierarchy by injecting a mixture of inorganic salt and chitosan (CS) solution from below into a reactor filled with alkaline solution. Folding and wrinkling instabilities occur on the originally smooth surface controlled by the salt composition and concentration. Liesegang-like precipitation patterns develop on the outer surface on a μm length scale in the presence of calcium chloride, while the precipitate particles are distributed evenly in the bulk as corroborated by X-ray μ-CT. On the other hand, barium hydroxide precipitates out only in the thin outer layer of the CS tubule when barium chloride is introduced into the CS solution. Independent of the concentration of the weakly interacting salt, an electric potential gradient across the CS membrane develops, which vanishes when the pH difference between the two sides of the membrane diminishes.

Controlled self-assembly of chemical gardens enables fabrication of heterogeneous chemobrionic materials

Chemical gardens are an example of a chemobrionic system that typically result in abiotic macro-, micro- and nano- material architectures, with formation driven by complex out-of-equilibrium reaction mechanisms. From a technological perspective, controlling chemobrionic processes may hold great promise for the creation of novel, compositionally diverse and ultimately, useful materials and devices. In this work, we engineer an innovative custom-built liquid exchange unit that enables us to control the formation of tubular chemical garden structures grown from the interface between calcium loaded hydrogel and phosphate solution. We show that systematic displacement of phosphate solution with water (H2O) can halt self-assembly, precisely control tube height and purify structures in situ. Furthermore, we demonstrate the fabrication of a heterogeneous chemobrionic composite material composed of aligned, high-aspect ratio calcium phosphate channels running through an otherwise dense matrix of poly(2-hydroxyethyl methacrylate) (pHEMA). Given that the principles we derive can be broadly applied to potentially control various chemobrionic systems, this work paves the way for fabricating multifunctional materials that may hold great potential in a variety of application areas, such as regenerative medicine, catalysis and microfluidics.