Formation Of Substances Research Articles

Tetrahedral framework nucleic acid-based small-molecule inhibitor delivery for ecological prevention of biofilm.

Biofilm formation constitutes the primary cause of various chronic infections, such as wound infections, gastrointestinal inflammation and dental caries. While preliminary achievement of biofilm inhibition is possible, the challenge lies in the difficulty of eliminating the bactericidal effects of current drugs that lead to microbiota imbalance. This study, utilizing in vitro and in vivo models of dental caries, aims to efficiently inhibit biofilm formation without inducing bactericidal effects, even against pathogenic bacteria. The tetrahedral framework nucleic acid (tFNA) was employed as a delivery vector for a small-molecule inhibitor (smI) specifically targeting the activity of glucosyltransferases C (GtfC). It was observed that tFNA loaded smI in a small-groove binding manner, efficiently transferring it into Streptococcus mutans, thereby inhibiting GtfC activity and extracellular polymeric substances formation without compromising bacterial survival. Furthermore, smI-loaded tFNA demonstrated a reduction in the severity of dental caries in vivo without adversely affecting oral microbial diversity and exhibited desirable topical and systemic biosafety. This study emphasizes the concept of 'ecological prevention of biofilm', which is anticipated to advance the optimization of biofilm prevention strategies and the clinical application of DNA nanocarrier-based drug formulations.

Bottom-up synthesis of novel cesium ferrate (Cs2FeO4) nanorods: Tailoring the structural and optical characteristics with room-temperature ferromagnetic and colossal dielectric performance

This paper presents a detailed protocol for the synthesis and characterization of cesium ferrate nanorods, a unique material that possesses a wide range of functionalities. These include the ability to demonstrate ferromagnetism at normal ambient temperature and the capacity to modify its structural, optical, and electrical properties. The XRD patterns specify the presence of an orthorhombic alkali ferrate phase (Cs2FeO4), with the size of the crystals increasing as the temperature rises. Furthermore, the XPS spectra of Cs 3d, Fe 2p, and O 1 s exhibit the formation of substances due to the peak positions fluctuate in reaction to temperature variations. The nanorod-like structure and size distribution of materials can be visualized using TEM and SEM. The UV spectra of the samples indicate broad absorption bands ranging from the visible to the near infrared (IR) region. Calcination of the as-prepared Cs2FeO4 at 400 and 600 ºC lowered the optical band gap from 2.15 to 2.04 and 2.06 eV, respectively. The temperature's synergistic effect is crucial in transforming materials from a paramagnetic to a ferromagnetic phase. The colossal sample's dielectric constant, which varies from around 107 at 600 ºC to 106 and 105 in the lower frequency band, and electrical conductivity show substantial fluctuations depending on the frequency. Nanorod systems have interesting optical, dielectric, and ferromagnetic properties at room temperature that could be used in many areas, such as photocatalysis, energy storage, and spintronics.

Thermo-Responsive Hydrogel Containing Microfluidic Chitosan Nanoparticles Loaded with Opuntia ficus-indica Extract for Periodontitis Treatment.

Periodontitis is a chronic inflammatory disease resulting from the dysbiosis of periodontal bacteria and the host's immune response, leading to tissue degradation and sustained inflammation. Traditional treatments, such as mechanical debridement and antimicrobial agents, often fail to fully eradicate pathogenic bacteria, especially in deep periodontal pockets. Consequently, the need for novel therapeutic approaches has increased the interest in bioactive natural extracts, such as that of Opuntia ficus-indica, known for its anti-inflammatory, antioxidant, and antimicrobial properties. This study investigates the encapsulation of Opuntia ficus-indica extract in OFI-loaded chitosan nanoparticles (OFI-NPs) via ionotropic gelation using a microfluidic system, allowing precise control over nanoparticle characteristics and enhancing protection against enzymatic degradation. To achieve localized and sustained release in periodontal pockets, a thermo-responsive hydrogel comprising hyaluronic acid and Pluronic F127 (OFI@tgels) was developed. The transition of OFI@tgels from a solution at low temperatures to a solid at body temperature enables prolonged drug release at inflammation sites. The in vitro application of the optimized formulation eradicated biofilms of S. mutans, P. aeruginosa (PAO1), and P. gingivalis over 36 h and disrupted extracellular polymeric substance formation. Additionally, OFI@tgel modulated immune responses by inhibiting M1 macrophage polarization and promoting a shift to the M2 phenotype. These findings suggest that OFI@tgel is a promising alternative treatment for periodontitis, effectively reducing biofilm formation and modulating the immune response.

Comparative transcriptomic analysis and volatile compound characterization of Aspergillus tubingensis and Penicillium oxalicum during their infestation of Japonica rice

Volatile organic compounds (VOCs), a byproduct of mold metabolism, have garnered increasing interest because the VOCs can be used to detect food early contamination. So far, the use of VOCs as indicators of rice mildew, specifically caused by Aspergillus tubingensis and Penicillium oxalicum, and the mechanisms of their generation are not well investigated. This study examines the VOCs produced by these molds during paddy storage, utilizing headspace solid-phase micro-extraction gas chromatography-mass spectrometry (HS-SPME-GC–MS). We further elucidate the mechanisms underlying the formation of these VOCs through a comparative transcriptomic analysis. The VOCs characteristic to A. tubingensis and P. oxalicum, identified with a VIP value > 1 in the partial least squares discriminant analysis (PLS-DA) model, are primarily alkenes. Our transcriptome analysis uncovers key metabolic pathways in both molds, including energy metabolism and pathways related to volatile substance formation, and identifies differentially expressed genes associated with alkane and alcohol formation.

Preparation, characterization and microencapsulation of walnut (Juglans regia L.) peptides-zinc chelate.

In this research, a novel kind of walnut (Juglans regia L.) peptides-zinc (Zn-WPs) chelate was obtained using the mass ratio of the walnut peptides (WPs) to ZnSO4.7H2O of 3.5:1 at pH 8.5 and 50°C for 84min, with the chelation rate of 84.5%. In comparison to walnut peptides (WPs), the contents of aspartic acid and glutamic acid in Zn-WPs chelate are approximately 27%, indicating that hydrophilic amino acids predominantly bind with walnut peptides. Following chelation with zinc ions, the ultraviolet-visible (UV) characteristic absorption peak shifted from 213nm to 210nm, while the average particle size of the chelate increased to 8.0±0.14µm, presenting a loose spherical structure under scanning electron microscopy. These findings suggest the formation of new substances. Fourier-transform infrared spectroscopy (FTIR) revealed carboxyl, amino, and peptide bonds as the chelation sites of WPs and zinc. The IC50 of walnut peptides-zinc (Zn-WPs) chelate is 2.91mg/mL, indicative of a favorable DPPH radical scavenging rate. Furthermore, Zn-WPs chelate microcapsules were produced via the spray drying method, achieving an encapsulation rate of 75.67±0.83% under optimal conditions. These microcapsules demonstrate robust stability across diverse environmental conditions. This study underscores the potential of Zn-WPs and its chelate microcapsules to enhance stability and bioactivity under varying circumstances. PRACTICAL APPLICATION: In this study, a new walnut peptide-zinc (Zn-WPs) chelate was prepared. The presence of zinc ions changes the structure and properties of walnut peptides and improves its stability. The production of Zn-WPs chelate microcapsules enables Zn-WPs to have strong in vitro stability under different pH and simulated gastrointestinal digestion conditions. These results provide novel insights for developing the walnut peptides as bioactive ingredients in functional foods.

Maternal prenatal systemic inflammation indexes predicts premature neonatal respiratory distress syndrome

Neonatal respiratory distress syndrome (NRDS) is one of the leading causes of neonatal mortality in low-income countries. It is caused by a lack of surface-active substances in the lungs, and the maternal inflammatory response plays an important role in the formation of surface-active substances in the fetal lungs. We aimed to investigate the correlation between maternal prenatal systemic inflammatory indices and respiratory distress syndrome in preterm neonates. This is a retrospective case–control study that collected data from all patients who delivered between 28 and 36 weeks of gestation at Longhua District People's Hospital in Shenzhen City and whose infants were admitted to the neonatal unit, newborns with respiratory distress syndrome were in the experimental group (NRDS group), and newborns without NRDS were in the control group (non-NRDS group). To minimize the effect of confounders on the results, propensity score matching was performed on baseline characteristics. Totally, 524 patients were included (93 in the NRDS group and 431 in the non-NRDS group), and 71 matched pairs (142 patients). The neutrophil-to-lymphocyte ratio (NLR), derived neutrophil-to-lymphocyte ratio (dNLR), systemic immune-inflammation index (SII), systemic inflammation response index (SIRI), aggregate index of systemic inflammation (AISI) and neutrophil lymphocyte to platelet ratio (NLPR) were higher in the NRDS group than in the non-NRDS group (p < 0.05). The ROC curves of NLR, dNLR, SII, SIRI, AISI and NLPR for the diagnosis of NRDS were plotted, and it was found that the combined diagnostic efficacy of these six systemic inflammatory markers was better (AUC: 0.643, P = 0.003). Patients were divided into two groups based on the cut-off values determined from the ROC curves, and analysis using binary regression models revealed that SII ≥ 1199.94 (OR, 2.554; 95% CI 1.245–5.239, P = 0.011) and NLPR ≥ 0.0239 (OR, 2.175; 95% CI 1.061–4.459, P = 0.034) were independent risk factors predicting NRDS. Maternal prenatal SII ≥ 1199.94 and NLPR ≥ 0.0239 are independent risk factors for NRDS, and clinicians may be used to prevent neonatal respiratory distress in advance to reduce the incidence of NRDS.

Hydrocarbon generation through pyrolysis of high-lipid-content microalgae within a dual-catalyst bed

The presence of oxygenated and nitrogenated compounds formed during the pyrolysis of microalgae poses challenges for utilizing bio-oil as a competitive alternative to fossil fuels. In an effort to mitigate the formation of these undesirable substances and enhance the production of aromatic hydrocarbons, this study delved into the catalytic analytical pyrolysis of Schizochytrium limacinum using a tandem catalytic bed. The research involved the characterization of Schizochytrium limacinum biomass and examining the impact of reaction temperature and the dual-catalytic bed (hydrotalcite followed by zeolite) on the formation of pyrolytic compounds and hydrocarbons. In the analytical pyrolysis, the dual-catalytic bed comprising NiHTC followed by NiHZSM-5 showed superior efficiency in deacidification and deoxygenation. Through the calcination and reduction/passivation of both catalysts, hydrocarbon production achieved noteworthy levels, reaching 89 % and 92 %, respectively, with a catalyst-to-biomass ratio set at 5:1. Under these optimized conditions, aromatic formation consistently remained between 60 % and 70 %. Furthermore, pathways were delineated to elucidate potential chemical reaction routes. The satisfactory results suggest that high-lipid content microalgae can serve as successful feedstock for hydrocarbon generation.

Electrochemistry and DFT study of galvanic interaction on the surface of monoclinic pyrrhotite (0 0 1) and galena (1 0 0)

The electrochemical interaction between galena and monoclinic pyrrhotite was investigated to examine its impact on the physical and chemical properties of the mineral micro-surface. This investigation employed techniques such as electrochemistry, metal ion stripping, X-ray photoelectron spectroscopy, and quantum chemistry. The electrochemical test results demonstrate that the galena surface in the electro-couple system exhibits a lower electrostatic potential and higher electrochemical activity compared to the monoclinic pyrrhotite surface, rendering it more susceptible to oxidation dissolution. Monoclinic pyrrhotite significantly amplifies the corrosion rate of the galena surface. Mulliken charge population calculations indicate that electrons are consistently transferred from galena to monoclinic pyrrhotite, with the number of electron transfers on the mineral surface increasing as the interaction distance decreases. The analysis of state density revealed a shift in the surface state density of galena towards lower energy levels, resulting in decreased reactivity and increased difficulty for the reagent to adsorb onto the mineral surface. Conversely, monoclinic pyrrhotite exhibited an opposite trend. The X-ray photoelectron spectroscopy (XPS) test results indicate that galvanic interaction leads to the formation of hydrophilic substances, PbSxOy and Pb(OH)2, on the surface of galena. Additionally, the surface of monoclinic pyrrhotite not only adsorbs Pb2+ but also undergoes S0 formation, thereby augmenting its hydrophobic nature.

Metabolic effects of physical exercise on zebrafish (Danio rerio) fed a high-fat diet.

The present study aimed to establish zebrafish as an experimental model for investigations into obesity and physical exercise, as well as to assess the effects of these factors on metabolism. The experiment spanned twelve weeks, comprising a feeding trial during which the last four weeks incorporated a physical exercise protocol. This protocol involved placing fifteen animals in a five-liter aquarium, where they were subjected to swimming at an approximate speed of 0.08m/s for 30min daily. Throughout the experiment, histological analyses of visceral, subcutaneous, and hepatic adipose tissues were conducted, along with biochemical analyses of total cholesterol and its fractions, triglycerides, glucose, lactate, and alanine aminotransferase (ALT) levels. Additionally, oxidative stress markers, such as reactive oxygen species (ROS) levels, superoxide dismutase (SOD) activity, and catalase activity and the formation of thiobarbituric acid-reactive substances, were investigated. The results revealed that the group fed a high-fat diet exhibited an increase in ROS production and SOD activity. In contrast, the group administered the high-fat diet and subjected to physical exercise demonstrated a notable reduction in visceral adipocyte area, hepatic steatosis levels, ALT levels, and SOD activity. These findings indicate that physical exercise has a positive effect on obesity and oxidative stress in zebrafish, providing promising evidence for future investigations in this field.

Investigation of CO2 capture performance of polyamine/organic alcohol ether non-aqueous absorbent regulated by ethylene glycol

The use of non-aqueous absorbents has great potential in reducing energy consumption during CO2 capture. However, current obstacles include the formation of precipitation or gelatinous substances after CO2 absorption, which significantly hinder their further application. Moreover, it is crucial to address concerns about insufficient CO2 capture performance and excessive regeneration energy. Therefore, non-aqueous homogeneous absorbents that do not produce precipitates, gels, or solids have gained considerable attention in recent years. In this study, a novel non-aqueous homogeneous absorbent based on polyamine/complex solvent was successfully developed by introducing ethylene glycol into the precipitation-producing polyamine/organic alcohol ether system. This modification resulted in improved CO2 capture performance and reduced regeneration energy. The AEEA/EG/2EE non-aqueous homogeneous absorbent showed a CO2 absorption capacity of 2.67 mol/kg and achieved an impressive regeneration efficiency of up to 81.65 % at the optimal desorption temperature (393 K) in only 40 min, surpassing the conventional MEA/H2O absorbent by a substantial margin (31.65 %). Thermodynamic analysis revealed that this absorbent exhibited a substantial reduction in both sensible and latent heat during CO2 desorption, resulting in a remarkable decrease of 42.8 % in total regeneration energy compared to the conventional MEA/H2O absorbent. The composite solvent EG/2EE was found not to be involved in the reaction process according to the 13C NMR analysis. The main absorption process involved the reaction between organic amine AEEA and CO2 to form carbamate, while the desorption process entailed reverse decomposition of carbamate for CO2 release. Therefore, utilizing ethylene glycol's advantageous properties for regulating polyamine/organic solvent systems presents a promising.

The influence mechanism of phospholipids structure and composition changes caused by oxidation on the formation of flavor substances in sturgeon caviar

The oxidation-induced phospholipids (PLs) underwent structural and compositional analysis, alongside the establishment of a simulation system to verify the link between phospholipid oxidation and flavor substances formation in sturgeon caviar. Structural alterations of PLs were tracked using 31P and 1H nuclear magnetic resonance (NMR), electron spin resonance spectroscopy (ESR), and Raman spectroscopy. The findings revealed a reduction in phosphatidylcholine (PC) and phosphatidylethanolamine (PE) from 82.3% and 10.4% to 58.2% and 5.8% respectively. Free radical signals exhibited an initial increase followed by a decrease. The diminished intensity in Raman spectra at 970 and 1080 cm−1 indicated reduced fat unsaturation attributable to PLs oxidation. Correlation analysis highlighted a significant association between PC and PE containing C22:6, C20:5, C20:4, and C18:2 with flavor substances, suggesting their role as key precursors for flavor development. This study established a theoretical basis for understanding the change of flavor quality in sturgeon caviar during storage.

ETHYLENE CONVERSION IN A BARRIER DISCHARGE: EXPERIMENT AND MODELING

The selective conversion of ethylene and its mixtures with argon and air in a barrier discharge has been studied. Plasma chemical transformation proceeds without the formation of polymer-like substances or products of deep oxidation to oxygen-containing compounds and various saturated and unsaturated hydrocarbons. Synthesis is carried out on a set-up with a gas-liquid reactor in the presence of water, which ensures the elimination of formed substances from the discharge area and prevents repeated exposure to barrier discharge plasma. The treatment of ethylene in a barrier discharge leads to the formation of saturated and unsaturated hydrocarbons C1–C5+ with a predominance of compounds with four carbon atoms in the molecule, the total content of which in the reaction products reaches 58.4 wt.%. The addition of argon to ethylene does not significantly affect the set and content of substances in the reaction products, an increase in ethylene conversion is observed, the maximum value of which reaches 58.9 wt.%. The treatment of a mixture of ethylene with air additives leads to the formation of hydroxyl and carboxyl compounds with a total content of ~29 wt.% in the products, and saturated and unsaturated hydrocarbons C1–C4 with a predominant acetylene content up to ~47 wt.%. The conversion of ethylene in one pass of the reaction mixture through the reactor under these conditions is 12.8 wt.%. When evaluating the energy losses of barrier discharge electrons in electron-molecular interactions during the conversion of ethylene, it was found that 78% of the energy of barrier discharge electrons is spent mainly on excitation of the electronic states of ethylene molecules, and argon additives can increase it to 86%. In the case of conversion of ethylene mixtures with air additives, it is shown that only ~14% of the discharge energy is spent on the excitation of the electronic states of the ethylene molecule, and the main amount (65%) is spent on the excitation of various different states of nitrogen molecules. The data obtained were used to develop a model of the chemical kinetics of ethylene conversion in a barrier discharge. The proposed model contains more than 280 reactions and is in good agreement with experimental data. As a result of the simulation, new data were obtained on the behavior of an ethylene molecule in a barrier discharge plasma with an average electron energy of 4-5 eV. The results obtained will be useful in the development of modern ethylene processing methods focused on the technological simplicity and compactness of the chemical process that meets the principles of "green chemistry" and low carbon footprint in the environment. For citation: Ryabov A.Yu., Kydryashov S.V. Ethylene conversion in a barrier discharge: experiment and modeling. ChemChemTech [Izv. Vyssh. Uchebn. Zaved. Khim. Khim. Tekhnol.]. 2024. V. 67. N 8. P. 6-14. DOI: 10.6060/ivkkt.20246708.12t.

Magnetite-mediated shifts in denitrifying consortia in bioelectrochemical system: Insights into species selection and metabolic dynamics

Conductive materials, such as magnetite, are recognized for their ability to enhance electron transfer and stimulate microbial metabolic activities. This study aimed to elucidate the metabolic potential and species interactions of dominant microbial species within complex communities influenced by magnetite. It indicated that the optimal dosage of magnetite at 4.5 mg/cm², would significantly improve denitrification efficiency and then reduce the time for removing 50 mg/L nitrate by 24.33 %. This enhancement was attributed to the reduced charge transfer resistance and the promoted formation of extracellular polymeric substances (EPS) facilitated by magnetite. Metagenomic analysis revealed that magnetite addition mitigated the competition among truncated denitrifiers for downstream nitrogen species, diminished the contribution of bacteria with complete nitrogen metabolism pathways to denitrification, and fostered a transition towards co-denitrification through interspecies cooperation, consequently leading to decreased nitrite accumulation and increased tolerance to nitrate shock loads. Furthermore, an in-depth study on a key species, Geobacter anodireducens JN93 within the bioelectrochemical system revealed that while magnetite with varying Fe(II) and Fe(III) ratios improved denitrification performance, the metabolic potential of Geobacter sp. varied for different nitrogen metabolism pathways. Collectively, this research provides insights into the microecological effects of magnetite on denitrifying consortia by shifting interspecific interactions via enhanced electron transfer.

Functional characterization of sesquiterpene synthase in Mongolian medicine Syringa oblata in heartwood formation

Lilac (Syringa oblata) is a well-known horticultural plant, and its aromatic heartwood is widely utilized in Traditional Mongolian Medicine for treating angina. However, limited research on the dynamic changes and mechanisms of aromatic substance formation during heartwood development hinders the analysis and utilization of its medicinal components. In this study, volatile metabolome analysis revealed that sesquiterpenes are the primary metabolites responsible for the aroma in heartwood, with cadinane and eremophilane types being the most prevalent. Among the identified sesquiterpene synthases, SoSTPS1-5 exhibited significantly increased expression in heartwood formation and was selected for further investigation. Molecular docking simulations predicted multiple amino acid binding sites and confirmed its ability to catalyze the formation of eremophilane, copaene, cadinane, germacrane, and elemane-type sesquiterpenes from FPP (farnesyl pyrophosphate). Co-expression and promoter analysis suggested a transcriptional regulatory network primarily involving WRKY transcription factors. Additionally, aiotic and biotic stress inducers, such as Ag+, Fusarium oxysporum, and especially MeJA, were found to activate the expression of SoSTPS1-5 and promote sesquiterpene accumulation. This study provides insights into the basis of medicinal substance formation and the potential mechanisms of sesquiterpene accumulation in lilac heartwood, laying a foundation for future research on the biosynthesis and utilization of its medicinal components.

Comprehensive insights into the organoleptic characteristics attributes of “HuangYuXiang”: Integration of volatilomics, sensomics, macrogenomics, lipidomics, and metabolomics

HuangYuXiang (HYX) is a colorful and flavorful traditional cuisine in China, which development of organoleptic attributes is a complex process. Flavor sensory attributes was explored through volatilomics, sensomics, macrogenomics, lipidomics, and metabolomics in seven HYXs. Group B demonstrated the highest sensory scores. A total of 41 volatiles were detected, of which 7 were identified as key volatiles. Caulobacteraceae sp., Psychrobacter faecalis, Ralstonia pickettii, Carnobacterium divergens, and Psychrobacter cibarius were representative bacteria in HYXs. A total of 679 lipids (251 differential lipids) and 329 (113 differential metabolites) metabolites were identified. The differential compounds were the main contributors to flavor differences. L-homocitrulline, arg-ser, 4-aminobenzoic acid, arg-gly, sucrose, pyridoxine, D-cyclohexylglycine, PC 21:4/22:6, PC O-15:0/22:5, PC O-20:2/20:5, and FA 18:2 were heavily accumulated under the microbial action, which in turn promoted the formation of aroma and taste substances. The results of this study provide a theoretical basis for the standardized processing of high-quality HYX.

Properties of saline soil stabilized with fly ash and modified aeolian sand

Against the backdrop of saline soil solidification and the resource utilization of solid waste and aeolian sand in cold and arid regions, this study employs locally accessible fly ash and aeolian sand to solidify saline soil. By combining unconfined compressive strength tests, X-ray diffraction analysis, scanning electron microscopy, orthogonal experiments, and single-factor analysis, the strength characteristics, mineral composition, and interfacial structure changes of saline soil solidified with different freeze-thaw cycles and varying amounts of fly ash, aeolian sand, and alkali activators were investigated. The effects of each factor were analyzed to determine the optimal mixture ratio and to explore the solidification mechanism.The results indicate that the unconfined compressive strength of saline soil is most significantly enhanced when solidified with a combination of fly ash, aeolian sand, and alkali activators. The optimal mixture ratio was found to be 24 % fly ash, 7 % aeolian sand, and 4.5 mol/L alkali activator. With the incorporation of these solidifying materials, the failure mode of saline soil transitions from plastic to brittle, and the stress-strain curve exhibited a strain-softening behavior. The combined solidification method demonstrated the most pronounced effect in mitigating freeze-thaw damage, with the unconfined compressive strength of the solidified soil reaching 7.01 MPa after seven freeze-thaw cycles, compared to 0.03 MPa for the untreated soil, an increase by a factor of 234.This significant enhancement is attributed to the formation of substantial gel substances, which mitigate the strength loss caused by freeze-thaw cycles. The gel locking mechanism between particles in the solidified soil far exceeds the detrimental effects of freeze-thaw cycles, effectively inhibiting freeze-thaw deterioration. Additionally, the reaction pathways involving AFt and AFm phases reduce the content of SO42- and Cl- in the solidified soil, effectively suppressing salt expansion and significantly improving the soil's strength.

Analysis of methods of natural gas technical loss determination and technical loss norms in gas supply network

In modern times, the role of energy resources is very large. One of the important energy resources is natural gas. The biggest advantage of using natural gas as a fuel is its high heat capacity and complete combustion without the formation of harmful substances. The process of natural gas distribution in the gas supply network is observed with gas loss. This is an objective, natural situation and creates a number of difficulties for natural gas enterprises. The article focuses on gas consumption in technological processes in the gas supply network, gas purges from pipelines during pipeline repair works, gas flushing out from the pipeline and determination of gas technological losses during the removal of air from the pipeline. Determination of gas losses caused by non-hermeticity of external gas pipelines and equipment, gas pressure regulation station (GPRS), cabinet-type gas control points (GCP), universal pressure regulator (UPR) and gas losses occurring during repairing of other technological equipment are discussed. Also, the determination of technical losses of natural gas at meters, sampling nodes, safety valves, gas distribution stations (GDS) (from gas losses during the management of shut-off valves, during purge of process instrumentation and automatics, when taking gas samples, during purges proses of safety valves, apparatus and pulse lines) is discussed. The article describes the principle of formation of technical losses in the gas supply network. Technical loss sources of natural gas in the process of gas supply, methods of calculating loss norms, the amount of small loss of which is determined separately for each specified loss source, are mentioned. Keywords: gas supply; natural gas; technical losses; pipeline; GPRS; GCP; UPR; gas meters; safety valves; gas distribution station.

Succession of microbial community structure in fermented grains during the fermentation of strong-flavor Baijiu and its impact on the metabolism of acids, alcohols, and esters.

The study clarified the succession of microbial community structures in fermented grains (FG) and their association with flavor compounds, along with their potential metabolic functions. The community diversity, functional genera and metabolites in FG were investigated by polyphasic detecting approaches. There are 13 dominant microorganisms in FG (relative abundance > 1%). Moisture and acidity are the key indicators driving the succession of microbial communities in FG. Eight kinds of microorganisms were involved in the metabolism of acid, higher alcohols and ethanol in FG and the abundance of pyruvate dehydrogenase and lactate dehydrogenase were significantly higher than other enzymes (P < 0.05). The results showed that 23 main flavor compounds were the results of the interaction of dominant microorganisms in FG. This study provides a basis for the formation of flavor substances in strong-flavor Baijiu.

Study on multi-scale dynamic mechanical properties of metakaolin modified recycled aggregate concrete under coupling conditions of sulfate attack and dry-wet cycles

To explore the potential of modified recycled aggregate concrete for use in construction projects, the evolution of its properties in the combined effects of environment and loading was investigated. This paper considered various factors, including the replacement amount of metakaolin (0 %, 15 %), dry-wet cycles (0, 20, 60, and 120 cycles), and the dynamic strain rate (ε˙ = 10−5/s, 10−4/s, 10−3/s, and 10−2/s), and conducted uniaxial compression, scanning electron microscopy (SEM), and X-ray diffraction (XRD) tests. The experimental findings demonstrated that the peak stress and elastic modulus of recycled aggregate concrete (RAC) exhibited a pattern of initial increase followed by a decrease before and after 20 dry-wet cycles, a concurrent upward trend was observed in both parameters with an escalation in strain rate and the incorporation of metakaolin (MK), and no uniform trend was observed for the peak strain. The test results from SEM and XRD revealed that the persistent formation of sulfate crystals and expansive substances like gypsum and ettringite were the primary factors contributing to the deterioration of specimen damage as cycle counts escalated. A quantitative analysis was conducted to investigate the mesoscopic damage mechanism associated with the dynamic mechanical properties and durability evolution process of metakaolin-based RAC under sulfate erosion. The correlation between the macroscopic mechanical properties and the microscopic changes of RAC was explored using statistical damage theory.

Effects of ultrasonic-assisted marinating on degradation of beef protein and formation of flavor precursors

In the process of meat production, marinating has a great influence on the flavor of the final product. In this study, the effect of ultrasound-assisted dry-marinating on protein degradation, structural changes, and formation of flavor precursor substances were investigated for 12 h and 24 h. The increase in protein degradation index and protease activities under ultrasound promoted the production of free amino acids. After sonication, the microstructure of muscle tissue was loose, and the relative content of β-turn and β-sheet were reduced, indicating that ultrasonic treatment facilitated the oxidation and hydrolysis of proteins. The increased proteolysis could be reflected in increased degradation of myosin light chains and troponin-T. It’s worth noting that ultrasonic-assisted dry-marinating 90 min and continued static marinating until 12 h could achieve the treatment of static marinating for 24 h. These results indicated that ultrasound-assisted dry-marinating could effectively improve the marinating efficiency by promoting protein degradation, affecting the formation of flavor precursors in meat.