Formation Of Salt Bridge Research Articles

Fabrication, characterization, and 3D printing of high-internal phase Pickering emulsion stabilized by heat-treated copra protein and calcium composite

HCP-Ca nanoparticles were prepared by incorporating varying concentrations of CaCl2 into heated copra protein (HCP). The results showed a positive correlation between Ca2+ concentration and turbidity, indicating greater HCP aggregation with increasing Ca2+ levels. Microscopy analysis revealed that HCP-Ca nanoparticles had a rough surface morphology. Intermolecular forces such as disulfide bonds, hydrophobic interactions, and hydrogen bonds were key in the conformation of HCP aggregates, with calcium ions enhancing stability by forming salt bridges. HCP-Ca nanoparticle-based high internal phase Pickering emulsions (HIPPEs) were also fabricated using homogenization-centrifugation treatment. The nanoparticles showed contact angles of 87.8° to 98.3°, particle sizes between 80.42 and 80.95 nm, and the HIPPEs had zeta potentials ranging from −23 to −39 mV. The addition of Ca2+ enhanced stability by forming salt bridges, reducing particle size, and altering size distributions. Rheological and texture analysis showed that Ca2+ addition significantly improved the viscoelasticity of HCP-Ca nanoparticle-based HIPPEs, as well as increasing hardness and adhesiveness. Optical microscopy and magnetic imaging techniques revealed details about emulsion formation and oil-water distribution in HCP-Ca nanoparticle-based HIPPEs. The excellent printing stability and structural versatility of HCP-Ca nanoparticle-based HIPPEs allowed the formation of complex 3D structures, offering a valuable approach for fabricating processable and editable HIPPEs from waste materials. This paper aims to develop a food-grade copra protein-based Pickering HIPPE and explore differences in fabrication methods, providing new insights into the design of innovative Pickering stabilizers.

Solvation-Enhanced Salt Bridges.

Salt bridges formed by amidines and carboxylic acids represent an important class of noncovalent interaction in biomolecular and supramolecular systems. Isothermal titration calorimetry was used to study the relationships between the strength of the interaction, the chemical structures of the components, and the nature of the solvent. The stability of the 1:1 complex formed in chloroform changed by 2 orders of magnitude depending on the basicity of the amidine and the acidity of the acid, which is consistent with proton transfer in the complex. Polar solvents reduce the stabilities of salt bridges formed with N,N'-dialkylamidines by up to 3 orders of magnitude, but this dependence on solvent polarity can be eliminated if the alkyl groups are replaced by protons in the parent amidine. The enhanced stability of the complex formed by benzamidine is due to solvation of the NH sites not directly involved in salt bridge formation, which become significantly more polar when proton transfer takes place, leading to more favorable interactions with polar solvents in the bound state. Calculation of H-bond parameters using density functional theory was used to predict solvent effects on the stabilities of salt bridges to within 1 kJ mol-1. While H-bonding interactions are strong in nonpolar solvents, and solvophobic interactions are strong in polar protic solvents, these interactions are weak in polar aprotic solvents. In contrast, amidinium-carboxylate salt bridges are stable in both polar and nonpolar aprotic solvents, which is attractive for the design of supramolecular systems that operate in different solvent environments.

Discovering Effective Chiral Dipeptides against Aβ(1-42) Aggregation by the Computational Screening Strategy.

The β-sheet-breaker (BSB) peptides inhibiting amyloidogenic aggregation have been extensively studied. However, the inhibition efficacy of ultrashort chiral dipeptides remains inadequately understood. In this study, we proposed a computational screening strategy to identify chiral dipeptides as BSB with optimal antiaggregation performance against Aβ(1-42) aggregation. We constructed a complete dipeptide library encompassing all possible chiral sequence arrangements and then filtered the library by cascaded molecular docking-molecular dynamics (MD) simulation. Our screening strategy discovered dipeptide DWDP (superscript for chirality) that displayed strong interactions with Aβ fibrils and inhibitory effects on Aβ aggregation, validated by subsequent experiments. Mechanistic investigation by both MD and replica-exchange molecular dynamics (REMD) simulations revealed that DWDP interacts with Aβ by hydrophobic contacts and hydrogen bonds and thus inhibits Aβ intermolecular contacts and salt bridge formation, therefore inhibiting Aβ aggregation and disrupting Aβ aggregates. Totally, our strategy presents a viable approach to discover potential dipeptides with effective antiaggregation ability as potential therapeutic agents for Alzheimer's disease.

Capturing Autoinhibited PDK1 Reveals the Linker's Regulatory Role, Informing Innovative Inhibitor Design.

PDK1 is crucial for PI3K/AKT/mTOR and Ras/MAPK cancer signaling. It phosphorylates AKT in a PIP3-dependent but S6K, SGK, and RSK kinases in a PIP3-independent manner. Unlike its substrates, its autoinhibited monomeric state has been unclear, likely due to its low population time, and phosphorylation in the absence of PIP3 has been puzzling too. Here, guided by experimental data, we constructed models and performed all-atom molecular dynamics simulations. In the autoinhibited PDK1 conformation that resembles autoinhibited AKT, binding of the linker between the kinase and PH domains to the PIF-binding pocket promotes the formation of the Glu130-Lys111 salt bridge and weakens the association of the kinase domain with the PH domain, shifting the population from the autoinhibited state to states accessible to the membrane and its kinase substrates. The interaction of the substrates' hydrophobic motif and the PDK1 PIF-binding pocket facilitates the release of the autoinhibition even in the absence of PIP3. Phosphorylation of the serine-rich motif within the linker further attenuates the association of the PH domain with the kinase domain. These suggest that while the monomeric autoinhibited state is relatively stable, it can readily shift to its active, catalysis-prone state to phosphorylate its diverse substrates. Our findings reveal the PDK1 activation mechanism and discover the regulatory role of PDK1's linker, which lead to two innovative linker-based inhibitor strategies: (i) locking the autoinhibited PDK1 through optimization of the interactions of AKT inhibitors with the PH domain of PDK1 and (ii) analogs (small molecules or peptidomimetics) that mimic the linker interactions with the PIF-binding pocket.

Development of low oil emulsion gels by solidification of oil droplets and determination of their rheological properties

This study aims to develop low-fat emulsion gels by physically solidifying oil droplets using a combination of pectin, soy protein, and bovine gelatin, and to investigate the rheological properties of these emulsion gels. The emulsion gels were formulated with different combinations of these biopolymers [PSG30 (pectin + soy protein + gelatin + 30% oil), PS30 (pectin + soy protein + 30% oil), P30 (pectin + 30% oil), G30 (gelatin + 30% oil)] and compared with commercially available low-fat mayonnaise (DYM40, 40% oil), mayonnaise (TM80, 80% oil), and spreadable fat (SY59, 59% oil) samples. The consistency index (K, Pa.sn) of the emulsion gels ranged from 1.903 to 150.739 Pa.sn, with PSG30 and PS30 formulations exhibiting higher K values than the commercial samples. The highest structural recovery percentage was observed in the SY59 sample at 114.91%. Thermal stability tests demonstrated that PSG30 and PS30 maintained their viscosity and storage modulus (G') values over a wide temperature range. Fourier Transform Infrared Spectroscopy (FTIR) analysis revealed significant hydrogen bonding and cross-linking interactions between pectin, soy protein, and gelatin. Microstructural imaging showed that PSG30 had the most homogeneous structure, consistent with its superior rheological performance. Molecular docking analysis determined the binding energy between gelatin and pectin to be -6.40 kcal/mol. Interaction between pectin (Arg-522 residue) and soy protein (11S globulin TGT) was facilitated by salt bridge formation. The developed formulations of pectin, soy protein, and gelatin demonstrate potential for producing low-fat emulsion gels with acceptable texture and stability properties for various food applications.

Structural basis of homodimerization of the JNK scaffold protein JIP2 and its heterodimerization with JIP1

The scaffold proteins JIP1 and JIP2 intervene in the c-Jun N-terminal kinase (JNK) pathway to mediate signaling specificity by coordinating the simultaneous assembly of multiple kinases. Using NMR, we demonstrate that JIP1 and JIP2 heterodimerize via their SH3 domains with the affinity of heterodimerization being comparable to homodimerization. We present the high-resolution crystal structure of the JIP2-SH3 homodimer and the JIP1-JIP2-SH3 heterodimeric complex. The JIP2-SH3 structure reveals how charge differences in residues at its dimer interface lead to formation of compensatory hydrogen bonds and salt bridges, distinguishing it from JIP1-SH3. In the JIP1-JIP2-SH3 complex, structural features of each homodimer are employed to stabilize the heterodimer. Building on these insights, we identify key residues crucial for stabilizing the dimer of both JIP1 and JIP2. Through targeted mutations in cellulo, we demonstrate a functional role for the dimerization of the JIP1 and JIP2 scaffold proteins in activation of the JNK signaling pathway.

The stromal side of the cytochrome b6f complex regulates state transitions.

In oxygenic photosynthesis, state transitions distribute light energy between PSI and PSII. This regulation involves reduction of the plastoquinone pool, activation of the state transitions 7 (STT7) protein kinase by the cytochrome (cyt) b6f complex, and phosphorylation and migration of light harvesting complexes II (LHCII). In this study, we show that in Chlamydomonas reinhardtii, the C-terminus of the cyt b6 subunit PetB acts on phosphorylation of STT7 and state transitions. We used site-directed mutagenesis of the chloroplast petB gene to truncate (remove L215b6) or elongate (add G216b6) the cyt b6 subunit. Modified complexes are devoid of heme ci and degraded by FTSH protease, revealing that salt bridge formation between cyt b6 (PetB) and Subunit IV (PetD) is essential to the assembly of the complex. In double mutants where FTSH is inactivated, modified cyt b6f accumulated but the phosphorylation cascade was blocked. We also replaced the arginine interacting with heme ci propionate (R207Kb6). In this modified complex, heme ci is present but the kinetics of phosphorylation are slower. We show that highly phosphorylated forms of STT7 accumulated transiently after reduction of the PQ pool and represent the active forms of the protein kinase. The phosphorylation of the LHCII targets is favored at the expense of the protein kinase, and the migration of LHCII toward PSI is the limiting step for state transitions.

Stability and Structure of Potentially Atmospherically Relevant Glycine Ammonium Bisulfate Clusters.

New particle formation (NPF) is the process by which trace atmospheric acids and bases cluster and grow into particles that ultimately impact climate. Sulfuric acid concentration drives NPF, but nitrogen-containing bases promote the formation of more stable clusters via salt bridge formation. Recent computational efforts have suggested that amino acids can enhance NPF, predicting that they can stabilize new particles via multiple protonation sites, but there has yet to be experimental validation of these predictions. We used mass spectrometry and infrared spectroscopy to study the structure and stability of cationic clusters composed of glycine, sulfuric acid, and ammonia. When collisionally activated, clusters were significantly more likely to eliminate ammonia or sulfuric acid than glycine, while quantum chemical calculations predicted lower binding free energies for ammonia but similar binding free energies for glycine and sulfuric acid. These calculations predicted several low-energy structures, so we compared experimental and computed vibrational spectra to attempt to validate the computationally predicted minimum energy structure. Unambiguous identification of the experimental structure by comparison to these calculations was made difficult by the complexity of the experimental spectra and the fact that the identity of the computed lowest-energy structure depended strongly on temperature. If their vapors are present, amino acids are likely to be enriched in new particles by displacing more weakly bound ammonia, similar to the behavior of other atmospheric amines. The carboxylic acid groups were found to preferentially interact with other carboxylic acids, suggesting incipient organic/inorganic phase separation even at these small sizes.

Systematic evaluation of lecithin:cholesterol acyltransferase binding sites in apolipoproteins via peptide based nanodiscs: regulatory role of charged residues at positions 4 and 7.

Lecithin:cholesterol acyltransferase (LCAT) exhibits α-activity on high-density and β-activity on low-density lipoproteins. However, the molecular determinants governing LCAT activation by different apolipoproteins remain elusive. Uncovering these determinants would offer the opportunity to design and explore advanced therapies against dyslipidemias. Here, we have conducted coarse-grained and all-atom molecular dynamics simulations of LCAT with nanodiscs made with α-helical amphiphilic peptides either derived from apolipoproteins A1 and E (apoA1 and apoE) or apoA1 mimetic peptide 22A that was optimized to activate LCAT. This study aims to explore what drives the binding of peptides to our previously identified interaction site in LCAT. We hypothesized that this approach could be used to screen for binding sites of LCAT in different apolipoproteins and would provide insights to differently localized LCAT activities. Our screening approach was able to discriminate apoA1 helixes 4, 6, and 7 as key contributors to the interaction with LCAT supporting the previous research data. The simulations provided detailed molecular determinants driving the interaction with LCAT: the formation of hydrogen bonds or salt bridges between peptides E4 or D4 and LCAT S236 or K238 residues. Additionally, salt bridging between R7 and D73 was observed, depending on the availability of R7. Expanding our investigation to diverse plasma proteins, we detected novel LCAT binding helixes in apoL1, apoB100, and serum amyloid A. Our findings suggest that the same binding determinants, involving E4 or D4 -S236 and R7-D73 interactions, influence LCAT β-activity on low-density lipoproteins, where apoE and or apoB100 are hypothesized to interact with LCAT.

Parallel β-Sheet Structure and Structural Heterogeneity Detected within Q11 Self-Assembling Peptide Nanofibers.

Q11 peptide nanofibers are used as a biomaterial for applications such as antigen presentation and tissue engineering, yet detailed knowledge of molecular-level structure has not been reported. The Q11 peptide sequence was designed using heuristics-based patterning of hydrophobic and polar amino acids with oppositely charged amino acids placed at opposite ends of the sequence to promote antiparallel β-sheet formation. In this work, we employed solid-state nuclear magnetic resonance spectroscopy (NMR) to evaluate whether the molecular organization within Q11 self-assembled peptide nanofibers is consistent with the expectations of the peptide designers. We discovered that Q11 forms a distribution of molecular structures. NMR data from two-dimensional (2D) 13C-13C dipolar-assisted rotational resonance indicate that the K3 and E9 residues between Q11 β-strands are spatially proximate (within ∼0.6 nm). Frequency-selective rotational echo double resonance (fsREDOR) on K3 Nζ and E9 Cδ-labeled sites showed that approximately 9% of the sites are close enough for salt bridge formation to occur. Surprisingly, dipolar recoupling measurements revealed that Q11 peptides do not assemble into antiparallel β-sheets as expected, and structural analysis using Fourier-transform infrared spectroscopy and 2D NMR alone can be misleading. 13C PITHIRDS-CT dipolar recoupling measurements showed that the most abundant structure consists of parallel β-sheets, in contrast to the expected antiparallel β-sheet structure. Structural heterogeneity was detected from 15N{13C} REDOR measurements, with approximately 22% of β-strands having antiparallel nearest neighbors. We cannot propose a complete structural model of Q11 nanofibers because of the complexity involved when examining structurally heterogeneous samples using NMR. Altogether, our results show that while heuristics-based patterning is effective in promoting β-sheet formation, designing a peptide sequence to form a targeted β-strand arrangement remains challenging.

The molecular interaction of six single-stranded DNA aptamers to cardiac troponin I revealed by docking and molecular dynamics simulation.

Cardiac troponin I (cTnI) is a cardiac biomarker for diagnosing ischemic heart disease and acute myocardial infarction. Current biochemical assays use antibodies (Abs) due to their high specificity and sensitivity. However, there are some limitations, such as the high-cost production of Abs due to complex instruments, reagents, and steps; the variability of Abs quality from batch to batch; the low stability at high temperatures; and the difficulty of chemical modification. Aptamer overcomes the limitations of antibodies, such as relatively lower cost, high reproducibility, high stability, and ease of being chemically modified. Aptamers are three-dimensional architectures of single-stranded RNA or DNA that bind to targets such as proteins. Six aptamers (Tro1-Tro6) with higher binding affinity than an antibody have been identified, but the molecular interaction has not been studied. In this study, six DNA aptamers were modeled and docked to cTnI protein. Molecular docking revealed that the interaction between all aptamer and cTnI happened in the similar cTnI region. The interaction between aptamer and cTnI involved hydrophobic interaction, hydrogen bonds, π-cation interactions, π-stack interactions, and salt-bridge formation. The calculated binding energy of all complexes was negative, which means that the complex formation was thermodynamically favorable. The electrostatic energy term was the main driving force of the interaction between all aptamer and cTnI. This study could be used to predict the behavior of further modified aptamer to improve aptamer performance.

Molecular dynamics simulation and key performance study of VES self-diverting acid system for deep carbonate reservoirs

Viscoelastic Surfactant (VES) self-diverting acid technology is an ideal approach for enhanced recovery from heterogeneous reservoirs. Most VES self-diverting acid systems currently used in field operations are only suitable for low-temperature reservoirs, and research on self-diverting VES acid systems for deep carbonate rock formations is lacking. Additionally, studies on the molecular dynamics of the self-assembly of VES have mainly focused on cationic surfactants, with insufficient research on the self-assembly of betaines in the oil industry. This study investigated the effects of temperature, surfactant concentration, and metal ion concentration on the self-assembly of erucamide propyl hydroxysulfobetaine (EHSB) based on a self-assembly model through molecular simulation methods. Moreover, the viscosity of the EHSB was predicted under various conditions. The results indicated that the system viscosity was optimal at an EHSB concentration of 4 wt%. The EHSB system requires initiation by metal ions to enhance the viscosity, with Ca2+ having a more pronounced effect than Mg2+. This is attributed to the formation of a unique “octahedral” structure by Ca2+ in solution, which aids in the formation of large micelles. Furthermore, because of the smaller ionic radius of Mg2+ compared with that of Ca2+, Mg2+ is more likely to penetrate micelles and form salt bridges, promoting a tighter arrangement of surfactant molecules. Based on molecular simulation and laboratory experiments, under optimal concentrations of inorganic salts and EHSB, the system’s viscosity remained greater than 150 mPa·s at 140 °C, meeting the requirements for diversion in deep carbonate rock formations. Finally, the acidization capacity and diversion effects of the acidic system were demonstrated using single-core flood and dual-core diversion experiments. The results showed that the acid solution significantly etched the core, and the residual acid reduced the permeability contrast of the core from 3.54 to 2.35, indicating a good acidizing diversion performance. This study utilizes a combination of computer simulations and laboratory experiments to optimize a VES self-diverting acid system. The computer-predicted viscosity corresponds well with the actual measured viscosity, providing new technical insights for evaluating the performance of VES under complex formation conditions that are unattainable through laboratory tests. A self-diverting VES acid system suitable for deep carbonate rock reservoirs at 140 °C was developed, providing technical support for the efficient development of deep carbonate reservoirs.

Structural Insights into the Binding Mode of a BLU-945 Analog with Wild-Type and Mutant EGFRs

Overcoming the acquired C797S mutation in nonsmall cell lung cancer (NSCLC) represents a great challenge for EGFR tyrosine kinase inhibitors (TKIs). BLU-945 is a promising fourth-generation EGFR TKI undergoing clinical trials, with different binding conformation from other known EGFR TKIs. In this study, we explored the binding mode of a BLU-945 analog (BLU) with wild-type and mutant EGFRs using [Formula: see text]s-scale molecular dynamics. The results show that Met793 at the hinge region is the critical binding site for BLU as observed in other known EGFR inhibitors. The occupancy of hydrogen bonds with Met793 is lower in wild-type EGFRs than in mutant EGFRs. Meanwhile, Thr854 contributes largely to the hydrogen bond formation for triple mutant EGFR compared to wild-type EGFR. Energy decomposition reveals that Leu718 and Leu844 dominate the energy contribution. T790M mutation plays an important role in BLU binding with wild-type and mutant EGFRs. Dynamic network analysis indicates that Arg841 behaves differently in triple mutant EGFR compared to wild-type, single and double mutant EGFRs, confirmed by further analysis of salt-bridge formation. Our study may provide beneficial information for developing fourth-generation EGFR TKIs.

Mechanism of Protein Aggregation Inhibition by Arginine: Blockage of Anionic Side Chains Favors Unproductive Encounter Complexes.

Aggregation refers to the assembly of proteins into nonphysiological higher order structures. While amyloid has been studied extensively, much less is known about amorphous aggregation, a process that interferes with protein expression and storage. Free arginine (Arg+) is a widely used aggregation inhibitor, but its mechanism remains elusive. Focusing on myoglobin (Mb), we recently applied atomistic molecular dynamics (MD) simulations for gaining detailed insights into amorphous aggregation (Ng J. Phys. Chem. B 2021, 125, 13099). Building on that approach, the current work for the first time demonstrates that MD simulations can directly elucidate aggregation inhibition mechanisms. Comparative simulations with and without Arg+ reproduced the experimental finding that Arg+ significantly decreased the Mb aggregation propensity. Our data reveal that, without Arg+, protein-protein encounter complexes readily form salt bridges and hydrophobic contacts, culminating in firmly linked dimeric aggregation nuclei. Arg+ promotes the dissociation of encounter complexes. These "unproductive" encounter complexes are favored because Arg+ binding to D- and E- lowers the tendency of these anionic residues to form interprotein salt bridges. Side chain blockage is mediated largely by the guanidinium group of Arg+, which binds carboxylates through H-bond-reinforced ionic contacts. Our MD data revealed Arg+ self-association into a dynamic quasi-infinite network, but we found no evidence that this self-association is important for protein aggregation inhibition. Instead, aggregation inhibition by Arg+ is similar to that mediated by free guanidinium ions. The computational strategy used here should be suitable for the rational design of aggregation inhibitors with enhanced potency.

SGLT2i improves kidney senescence by down-regulating the expression of LTBP2 in SAMP8 mice.

Senescent kidney can lead to the maladaptive repairment and predispose age-related kidney diseases. Here, we explore the renal anti-senescence effect of a known kind of drug, sodium-dependent glucose transporters 2 inhibitor (SGLT2i). After 4 months intragastrically administration with dapagliflozin on senescence-accelerated mouse prone 8 (SAMP8) strain mice, the physiologically effects (lowering urine protein, enhancing glomerular blood perfusion, inhibiting expression of senescence-related biomarkers) and structural changes (improving kidney atrophy, alleviating fibrosis, decreasing glomerular mesangial proliferation) indicate the potential value of delaying kidney senescence of SGLT2i. Senescent human proximal tubular epithelial (HK-2) cells induced by H2 O2 also exhibit lower senescent markers after dapagliflozin treatment. Further mechanism exploration suggests LTBP2 have the great possibility to be the target for SGLT2i to exert its renal anti-senescence role. Dapagliflozin down-regulate the LTBP2 expression in kidney tissues and HK-2 cells with senescent phenotypes. Immunofluorescence staining show SGLT2 and LTBP2 exist colocalization, and protein-docking analysis implies there is salt-bridge formation between them; these all indicate the possibility of weak-interaction between the two proteins. Apart from reducing LTBP2 expression in intracellular area induced by H2 O2 , dapagliflozin also decrease the concentration of LTBP2 in cell culture medium. Together, these results reveal dapagliflozin can delay natural kidney senescence in non-diabetes environment; the mechanism may be through regulating the role of LTBP2.

Atomic Force Microscopy and Molecular Dynamic Simulation of Adsorption of Polyacrylamide with Different Chemistries onto Calcium Carbonate.

This study investigates the interaction of polyacrylamide (PAM) of different functional groups (sulfonate vs. carboxylate) and charge density (30% hydrolysed vs. 10% hydrolysed) with calcium carbonate (CaCO3) via atomic force microscopy (AFM) and partly via molecular dynamic (MD) simulations. The PAM used were F3330 (30% hydrolysed), AN125 (25% sulfonated), and AN910 (% hydrolysed). A total of 100 ppm of PAMs was prepared in 0.1% NaCl, 3% NaCl, and 4.36% NaNO3 to be employed in AFM experiments, while oligomeric models (30 repeating units) of hydrolysed polyacrylamide (HPAM), sulfonated polyacrylamide (SPAM), and neutral PAM (NPAM) were studied on a model calcite surface on MD simulations. AFM analysis indicated that F3330 has a higher average adhesion and interaction energy with CaCO3 than AN125 due to the bulky sulfonate side group of AN125 interfering with SPAM adsorption. Steric repulsion of both PAMs was similar due to their comparable molecular weights and densities of the charged group. In contrast, AN910 showed lower average adhesion and interaction energy, along with slightly longer steric repulsion with calcite than F3330, suggesting AN910 adopts more loops and tails than the slightly flatter F3330 configuration. An increase in salt concentration from 0.1% to 3% NaCl saw a reduction in adhesion and interaction energy for F3330 and AN125 due to charge screening, while AN910 saw an increase, and these values increased further at 4.36% NaNO3. MD simulations revealed that the salt ions in the system formed salt bridges between PAM and calcite, indicating that the adhesion and interaction energy observed from AFM are likely to be the net balance between PAM charged group screening and salt bridging by the salt ions present. Salt ions with larger bare radii and smaller hydrated radii were shown to form stronger salt bridges.

Deciphering the molecular choreography of Janus kinase 2 inhibition via Gaussian accelerated molecular dynamics simulations: a dynamic odyssey.

The Janus kinases (JAK) are crucial targets in drug development for several diseases. However, accounting for the impact of possible structural rearrangements on the binding of different kinase inhibitors is complicated by the extensive conformational variability of their catalytic kinase domain (KD). The dynamic KD contains mainly four prominent mobile structural motifs: the phosphate-binding loop (P-loop), the αC-helix within the N-lobe, the Asp-Phe-Gly (DFG) motif, and the activation loop (A-loop) within the C-lobe. These distinct structural orientations imply a complex signal transmission path for regulating the A-loop's flexibility and conformational preference for optimal JAK function. Nevertheless, the precise dynamical features of the JAK induced by different types of inhibitors still remain elusive. We performed comparative, microsecond-long, Gaussian accelerated molecular dynamics simulations in triplicate of three phosphorylated JAK2 systems: the KD alone, type-I ATP-competitive inhibitor (CI) bound KD in the catalytically active DFG-in conformation, and the type-II inhibitor (AI) bound KD in the catalytically inactive DFG-out conformation. Our results indicate significant conformational variations observed in the A-loop and αC helix motions upon inhibitor binding. Our studies also reveal that the DFG-out inactive conformation is characterized by the closed A-loop rearrangement, open catalytic cleft of N and C-lobe, the outward movement of the αC helix, and open P-loop states. Moreover, the outward positioning of the αC helix impacts the hallmark salt bridge formation between Lys882 and Glu898 in an inactive conformation. Finally, we compared their ligand binding poses and free energy by the MM/PBSA approach. The free energy calculations suggested that the AI's binding affinity is higher than CI against JAK2 due to an increased favorable contribution from the total non-polar interactions and the involvement of the αC helix. Overall, our study provides the structural and energetic insights crucial for developing more promising type I/II JAK2 inhibitors for treating JAK-related diseases.

Force-induced salt bridge formation enhances HP1 homodimer interaction, implying augmented chromatin crosslinking and phase separation

Force-induced salt bridge formation enhances HP1 homodimer interaction, implying augmented chromatin crosslinking and phase separation

Zn2+ Binding Increases Parallel Structure in the Aβ(16-22) Oligomer by Disrupting Salt Bridge in Antiparallel Structure.

The aggregation of monomeric amyloid β protein (Aβ) into oligomers and amyloid plaque in the brain is associated with Alzheimer's disease. The hydrophobic central core Aβ16-22 has been widely studied due to its essential role in the fibrillization of full-length Aβ peptides. Compared to the homogeneous antiparallel structure of Aβ16-22 at the late stage, the early-stage prefibrillar aggregates contain varying proportions of different β structures. In this work, we studied the appearance probabilities of various self-assembly structures of Aβ16-22 and the effects of Zn2+ on these probabilities by replica exchange molecular dynamics simulations. It was found that at room temperature, Aβ16-22 can readily form assembled β-sheet structures in pure water, where a typical antiparallel arrangement dominates (24.8% of all sampled trimer structures). The addition of Zn2+ to the Aβ16-22 solution will dramatically decrease the appearance probability of antiparallel trimer structures to 12.5% by disrupting the formation of the Lys16-Glu22 salt bridge. Meanwhile, the probabilities of hybrid antiparallel/parallel structures increase. Our simulation results not only reveal the competition between antiparallel and parallel structures in the Aβ16-22 oligomers but also show that Zn2+ can affect the oligomer structures. The results also provide insights into the role of metal ions in the self-assembly of short peptides.

Cross-reaction mediated by distinct key amino acid combinations in the complementary-determining region (CDR) of a monoclonal antibody.

In immunology, cross-reaction between antigens and antibodies are commonly observed. Prior research has shown that various monoclonal antibodies (mAbs) can recognize a broad spectrum of epitopes related to influenza viruses. However, existing theories on cross-reactions fall short in explaining the phenomena observed. This study explored the interaction characteristics of H1-74 mAb with three peptides: two natural peptides, LVLWGIHHP and LPFQNI, derived from the hemagglutinin (HA) antigen of the H1N1 influenza virus, and one synthetic peptide, WPFQNY. Our findings indicate that the complementarity-determining region (CDR) of H1-74 mAb comprised five antigen-binding sites, containing eight key amino acid residues from the light chain variable region and 16 from the heavy chain variable region. These critical residues formed distinct hydrophobic or hydrophilic clusters and functional groups within the binding sites, facilitating interaction with antigen epitopes through hydrogen bonding, salt bridge formation, and π-π stacking. The study revealed that the formation of the antibody molecule led to the creation of binding groups and small units in the CDR, allowing the antibody to attach to a variety of antigen epitopes through diverse combinations of these small units and functional groups. This unique ability of the antibody to bind with antigen epitopes provides a new molecular basis for explaining the phenomenon of antibody cross-reaction.