Basin Formation Research Articles

Application of the wavelet transform and Hilbert–Huang transform in stratigraphic sequence division of Jurassic Shaximiao Formation in Southwest Sichuan Basin

Abstract In the southwestern Sichuan Basin, the Jurassic Shaximiao Formation encompasses a multitude of working areas, displaying intricate sedimentary traits. Traditional methods of stratigraphic division based on sequence suffer from inherent subjectivity and limitations. This study employs a combined mathematical approach to use the wavelet transform (WT) and the Hilbert–Huang transform (HHT). It decomposes the natural gamma ray (GR) logging curve into energy spectrum plots and wavelet coefficients at different scales, high and low frequency signals at different frequencies, and a set of intrinsic mode function components and residual functions. The study conducted a detailed stratigraphic division of the Jurassic Shaximiao Formation in the southwestern Sichuan Basin using these methods. The WT offers greater resolution for the periodic changes in the base level, whereas the HHT demonstrates a superior correlation with the positions of stratigraphic interfaces. The combined utilization of the continuous wavelet transform, the discrete wavelet transform, and HHT methods has demonstrated encouraging outcomes in the stratigraphic division of the Jurassic Shaximiao Formation. These methods have been shown to enhance the accuracy of stratigraphic division and to reduce the influence of subjective factors. This study presents new insights and approaches for geological data processing, offering significant theoretical and practical implications and novel technical means for oil and gas exploration and development.

Fluid Mechanics, and Its Quantum Developments and Applications

Based on the known theories of fluid mechanics, we research the new quantum fluid mechanics by operator method. Further, we discuss its various developments combined the extensive quantum theory and other theories. Finally, we search possible applications in some aspects: in biology many systems are fluids; in astronomy binary stars, the density wave theory and evolutionary direction on spiral galaxies, and sunspot are researched; in geosciences earthquake, formation of basin and hydrocarbon layer are proposed; in social sciences the social hydrodynamics and corresponding waves and tides, the social synergetics, corruption, etc., are discussed.

Characteristics, main controlling factors and densification mechanisms of unconventional tight reservoirs in Triassic Yanchang Formation in southern Ordos Basin, China

The key factors controlling the densification of unconventional reservoirs (e.g., tight oil and gas reservoirs) remain poorly understood and directly affect the distribution of exploitable resources. Here, systematically explored reservoir characteristics, depositional microfacies, and the main factors controlling densification of the tight oil reservoir in the Chang 8 Member (Yanchang Formation, Middle Triassic) in the Zhenjing area of the southern Ordos Basin by thin section analysis, scanning electron microscopy, physical property measurement, X-ray diffraction, and mercury injection. Our results confirm the Chang 8 reservoir as an extremely low permeability tight sandstone reservoir mainly comprising lithic feldspathic sandstone with various primary and secondary pores and fine pore channels. The highest quality reservoir is mainly restricted to the middle and lower parts of subaqueous distributary channel microfacies. Dissolution partly contributed to reservoir formation, but the persistence of early, non-compressed storage space was more important. The compression of plastic rock debris removed a significant amount of porosity, and calcite and kaolinite both fill pores and contribute to the structural strength of pore space. We identified three densification processes: the persistent densification of highly plastic rocks, calcite cementation, and feldspar dissolution and subsequent kaolinite precipitation. After their compaction, the Chang 8 Member reservoirs were charged with hydrocarbons. We applied clustering analysis to eight reservoir characteristics (porosity, permeability, median pore-throat radius, maximum pore-throat radius, median capillary pressure, pore discharge pressure, chlorite content, kaolinite content) to quantitatively classify the Chang 8 reservoir into three categories. Type-I reservoirs have the best conditions for hosting tight oil reservoirs, with ∼12% porosity, permeabilities of ∼0.2 × 10−3 μm2, trial oil production rates of >5 m3/d, and, indeed, occur in subaqueous distributary channel microfacies. Type-II reservoirs ∼10% porosity, permeabilities of ∼0.1 × 10−3 μm2, and trial oil production rates of 1–5 m3/d. Type-III reservoirs have ∼5% porosity, permeabilities of ∼0.05 × 10−3 μm2, and trial oil production rates <1 m3/d. These results provide an important basis for predicting the distribution of exploitable zones in the Chang 8 sandstone and other adjacent tight sandstones.

Biogenic “phosphorus” effect of terrestrial lakes and its significance to oil shale during the Carnian period in the late Triassic

The Triassic lacustrine organic-rich shale (LORS) in Member 7 of the Yanchang Formation (Carnian stage) in the southern Ordos Basin is relatively well developed. Additionally, its organic matter abundance, lake biomass and biodiversity, exceed the maximum values of the other strata deposited during the same period. Apatite is one of the most important minerals and is closely related to biological activities. However, the types and genesis of the continental sedimentary apatite and its significance to shale oil are not clear. Here, the stratigraphy, petrology, and sedimentology of the phosphorus-bearing rock series in the Ma Quan section are studied and its sedimentary environment and phosphorus formation are discussed. The current research shows that apatite in the study area can be divided into three categories: collophanite, bone fossils, and spherical microfossils. These three types of biogenic “phosphorus” products provide effective records of the transformation of the biological substances into sedimentary organic matter. There are two main formation mechanisms: the direct action of organisms and the interaction between the organisms. Bone fossils and spherical microfossils are formed by the direct action of organisms, while collophanite is formed by the indirect action of organisms. The phosphatization methods of the organisms mainly include “coating”, “replacement”, and “filling”, and the presence of a ubiquitous phosphate filler potentially reflects a sufficient phosphate supply. Apatite also is highly important for the development of organic matter in oil shale. First, it changes the productivity conditions. Second, the apatite in the shell of spherical microfossils has a certain protective effect on the organic matter in the inner cavity. In the current study, the geological processes of collophanite deposition and mineralization are explained, an important basis for prospecting phosphate resources is provided, and a new field for the study of the organic matter enrichment mechanism of source rocks is established. At the same time, the process of lake biogenic phosphorus formation provides evidence from the continental deposits in the eastern margin of the Tethys region for exploring deep global changes.

Predicting gully formation: An approach for assessing susceptibility and future risk

AbstractGully erosion is a significant natural hazard and a form of soil erosion. This research aims to predict gully formation in the Kalshour basin, Sabzevar, Iran. Employing the Information Gain Ratio (IGR) index, we identified 13 key factors out of 22 for modeling, with elevation emerging as the most influential factor in gully formation. The study evaluated the performance of individual machine learning algorithms and ensemble algorithms, including the Functional Tree (FT) as the main classifier, Bagging (Bagg), AdaBoost (Ada), Rotation Forest (RoF), and Random Subspace (RSS). Using a data set of 400 gully and non‐gully points obtained through field investigations (70% for training and 30% for testing), the RoF model achieved an area under the curev (AUC) value of 0.99, indicating its high predictive ability for gully‐susceptible areas. Other algorithms also performed well (Ada: 0.90, FT: 0.92, RSS: 0.94, Bagg: 0.95). However, the RoF algorithm with the functional tree as the main classifier (RoF_FT) demonstrated the highest ability in gully classification and susceptibility mapping, enhancing the functional tree's performance. In addition to AUC, the RoF_FT model achieved an F1 score of 0.89 and an MCC of 0.78 on the validation set, indicating a high balance between precision and recall, and a strong correlation between predicted and actual classes, respectively. Similarly, other models showed robust performance with high F1 scores and MCC values, but the RoF_FT model consistently outperformed them, underscoring its robustness and reliability. The resulting gully erosion‐susceptibility map can be valuable for decision‐makers and local managers in soil conservation and minimizing damages. Implementing proactive measures based on these findings can contribute to sustainable land management practices in the Kalshour basin.Recommendations Gully erosion threat: Gully erosion poses a significant threat to soil, with far‐reaching environmental consequences. Predictive modeling: This research focuses on predicting gully formation in the Kalshour basin, Sabzevar, Iran, using advanced machine learning algorithms. Key findings for decision‐makers: The study evaluates the performance of various machine learning algorithms and ensemble algorithms, with the Functional Tree serving as the main classifier. This not only enhances our ability to predict gully formation but also provides a valuable tool for decision‐makers and local managers in soil conservation. Impact on sustainable land management: By offering a gully erosion‐susceptibility map, the research empowers decision‐makers to implement proactive measures, minimizing damage and contributing to sustainable land management practices. Interdisciplinary approach: The study's combination of geospatial analysis, machine learning, and soil conservation aligns with the journal's mission to advance understanding in environmental modeling.

Ediacaran to Jurassic geodynamic evolution of the Alborz Mountains, north Iran: geochronological data from the Gasht Metamorphic Complex

The Alborz Mountains in north Iran underwent several tectono-metamorphic events during opening and closure of the Palaeotethys and Neotethys Oceans. These events are recorded by rare and discontinuously exposed metamorphic rocks, such as the HP-LT Asalem-Shanderman Complex and the Gasht Metamorphic Complex (GMC), that are considered to have been metamorphosed during the closure of the Palaeotethys Ocean. The GMC comprises poorly exposed metasediments and amphibolites metamorphosed under greenschist- to amphibolite-facies conditions, along with smaller volumes of granites. Different dating methods were applied to selected samples of the GMC basement to constrain the geological evolution of this part of the Alborz Mountains. A metagranite yielded two LA-ICP-MS U–Pb zircon ages of 638.4 ± 4.1 Ma and 590.3 ± 4.8 Ma that possibly date protolith crystallisation and later deformation and metamorphism, respectively, and a granite yielded a late Ediacaran 551 ± 2.5 Ma U–Pb zircon crystallisation age. A northern provenance from the basement to the South Caspian Basin can neither be established nor ruled out because no age data are available for this unit. Derivation of the GMC from Turan Block basement is unlikely, as this has a different crustal makeup and is probably composed of Paleoproterozoic and early Neoproterozoic material. The zircon ages are similar to published ages from the Arabian-Nubian Shield, indicating that this part of the Alborz basement may have belonged to the northern margin of Gondwana in the Neoproterozoic before rifting and drifting away along with other Iranian blocks (the Cimmerian terranes) during opening of the Neotethys Ocean. Chemical Th-U-total Pb ages for metamorphic monazites from two metapelite samples yielded a very large range of spot ages, of which c. 80% falls between 200 and 250 Ma, that do not allow to distinguish between Eo-Cimmerian and Main Cimmerian events in the GMC. However, they may indicate that the amphibolite-facies peak metamorphism of the GMC occurred sometime in the Triassic, in any case much later than the Carboniferous metamorphism in the neighbouring Asalem-Shanderman Metamorphic Complex to the north. Peak-metamorphic amphibole from amphibolite, retrograde white mica and foliation-defining biotite from metapelites and magmatic white mica from granite yielded much younger 175.1 ± 0.5 to 177.0 ± 0.4 Ma 40Ar/39Ar plateau ages. The Toarcian 40Ar/39Ar ages for minerals with different nominal closure temperatures reflect very rapid cooling of GMC basement below the Shemshak Group due to extension-triggered uplift. This late Toarcian to Aalenian extension event can be correlated with the regional Mid-Cimmerian unconformity of mid-Bajocian age (c. 170 Ma) that resulted from the tectonic movements causing rapid uplift and erosion. Extension probably started in the western Alborz Mountains in the Toarcian, migrated eastward, and culminated in the Aalenian in the eastern Alborz with the formation of a deep-marine basin. It was probably triggered by the onset of the subduction of Neotethys oceanic crust beneath the Central Iranian Microcontinent.

Prediction of Structural Fracture Distribution and Analysis of Controlling Factors in a Passive Continental Margin Basin—An Example of a Clastic Reservoir in Basin A, South America

Structural fracture distribution is essential in oil and gas transportation and development in passive continental margin basins. In this paper, taking as an example the clastic reservoirs in the A-Basin, a passive continental margin in northeastern South America, the paleotectonic stress field of the Late Cretaceous Maastrichtian formation in Basin A was numerically simulated by finite element technique through the integrated interpretation of seismic total data, logging data and core data, and the distribution of tectonic fractures was later predicted based on rock fracture criterion. The results of the study show that: (1) The distribution of tectonic stress and fractures during the Late Cretaceous Maastrichtian formation of Basin A is affected by the fracture zone, mechanical properties of rocks and tectonic stress, regions with extensive fracture development are susceptible to stress concentrations, resulting in significant stress gradients. (2) The development of structural fractures in the study area was predicted using the Griffiths criterion, and the tensile rupture coefficient T was introduced to quantitatively characterise the intensity of fracture development, with larger values reflecting a higher degree of fracture development. The well-developed and relatively well-developed fractures are mainly located in the fracture zones and the interior of submarine fans. (3) Fracture zones and sedimentary phases mainly control structural fractures in Basin A; within 5 km outside the fracture zones, the development of fractures is controlled by the fracture zones, beyond which the regional tectonic stress field controls them; inside the sedimentary fan, the development of fractures is controlled by the sedimentary subphase, which decreases in the order of the upper fan, the middle fan, and the lower fan; inside the subphase, they are controlled by the regional tectonic stress field, and the fractures show the increasing trend in the direction of NW-NE.

First description of Tithonian corals from the Picún Leufú Depocentre, Neuquén Basin, west-central Argentina

A scleractinian coral fauna from the Upper Jurassic (Tithonian) of the Neuquén Basin (west-central Argentina) is described for the first time. It comprises only two species: Eocolumastrea octaviae (Prever, 1909) and Stelidioseris columbaris (Scott and Aleman, 1984). The first was reported previously from the Lower Cretaceous of this region, and the second is a newly reported register for the basin. The new record of Eocolumastrea octaviae reported here extends the stratigraphic range of the genus to the late Tithonian. Both corals are colonial and, when favourable conditions arose, thrived in a mixed carbonate-siliciclastic environment above or slightly below the storm wave base level. The coral fauna of the Picún Leufú Formation presents, regarding its taxonomy and type of growth form, a great similarity to that of the Valanginian-Hauterivian Agrio Formation of the same basin. It differs notably from that of the Oxfordian La Manga Formation, suggesting a change in palaeoenvironmental conditions probably due to a general increase in the sedimentation rate in the studied basin between the Oxfordian and the Hauterivian, among other possibilities.

Tectonic evolution of the eastern margin of the Northern South Yellow Sea Basin in the Yellow Sea since the Late Cretaceous

The South Yellow Sea Basin is the largest sedimentary basin in the Yellow Sea. The Gunsan Basin in the central eastern part of the Northern South Yellow Sea Basin comprises the Western, Central, and Eastern Subbasins. The Eastern Subbasin marks the eastern margin of the South Yellow Sea Basin. Interpretation of multi-channel seismic profiles and balanced cross-section restoration of depth-converted seismic profiles reveal the structural characteristics and evolution of the Eastern Subbasin. The subbasin comprises three groups of faults: NW-SE, NE-SW, and NNE-SSW trending faults. The subsidence pattern of the subbasin, derived from the cross-section restoration analysis, indicates five distinguished evolution phases: (i) rapid subsidence in the Late Cretaceous, (ii) slow subsidence from the Paleocene to the Eocene, (iii) accelerated subsidence in the Oligocene, (iv) alternation of the uplift and subsidence in the Early Miocene, and (v) gradual subsidence since the Middle Miocene. The main and moderate subsidence can be explained by the combination of extension in the SE and NE-SW directions that formed double duplex structures. We suggest that the NW oblique subduction of the Pacific Plate under the NE Asia margin induced both extension toward the trench and dextral strike-slip parallel to the margin. The extension toward the trench caused SE transtension in a local pull-apart setting, whereas the dextral strike-slip parallel to the margin caused NE-SW extension, inducing more significant subsidence. The combined processes resulted in the progressive development of nested duplex structures. The evolution of the Eastern Subbasin is not compatible with previously suggested models for the western part of the South Yellow Sea Basin including foreland basin formation and transtension induced by branch faults of the Tan-Lu Fault.

The influence of different diagenesis on the elastic properties of different shale lithofacies: a case study of the upper Permian Wujiaping formation in East Sichuan Basin, China

Understanding the impact of diagenesis on the elastic properties of organic-rich shale reservoirs is essential for evaluating unconventional hydrocarbon reservoirs and interpreting seismic data. Recent advancements in the exploration of the Permian Wujiaping Formation in the eastern Sichuan Basin indicate its potential to become a significant succession within the Sichuan Basin. However, the effect of different lithofacies in the Wujiaping Formation on shale elastic properties under varying diagenetic conditions remains unclear, hindering detailed reservoir interpretation. This study employs X-ray diffraction, thin section analysis, scanning electron microscopy, organic geochemistry, and dynamic elastic property tests to investigate the Wujiaping Formation shale. The results reveal three primary lithofacies types: argillaceous shale, mixed shale, and siliceous shale. Argillaceous shale, subjected to intense compaction, forms a dense rock framework of oriented clay minerals, characterized by low porosity (1.66%), low elastic wave velocity (4122.30 m/s), low elastic modulus (2174.59 m/s), and high Poisson's ratio (32.24 GPa). Mixed shale, dominated by carbonates and quartz, exhibits a rock framework formed through dissolution and cementation, with high elastic wave velocity (5196.54 m/s), relatively high elastic modulus (2975.86 m/s), and moderate Poisson's ratio (58.53 GPa). Siliceous shale, comprising biogenic quartz particles, shows strong resistance to compaction. During hydrocarbon generation, it develops abundant organic matter pores, resulting in the highest porosity (2.36%), high elastic wave velocity (5177.92 m/s), high elastic modulus (2975.86 m/s), and low Poisson's ratio (62.23 GPa). The significant differences in mineral composition and diagenetic processes across the lithofacies lead to distinct elastic properties. This study provides a rock physics framework for the detailed seismic prediction of "sweet spots" in the Wujiaping Formation shale reservoirs and offers new insights into characterizing the diagenesis of unconventional shale reservoirs using geophysical properties.

Geodynamic Evolution of the Lau Basin

AbstractThe formation of Lau Basin records an extreme event of plate tectonics, with the associated Tonga trench exhibiting the fastest retreat in the world (16 cm/yr). Yet paleogeographic reconstructions suggest that seafloor spreading in the Lau Basin only initiated around 6 Ma. This kinematics is difficult to reconcile with our present understanding of how subduction drives plate motions. Using numerical models, we propose that eastward migration of the Lau Ridge concurrent with trench retreat explains both the narrow width and thickened crust of the Lau Basin. To match the slab geometry and basin width along the Tonga‐Kermadec trench, our models suggest that fast trench retreat rate of 16 cm/yr might start ~15 Ma. Tonga slab rollback induced vigorous mantle flow underneath the South Fiji Basin which is driving the extension and thinning of the basin and contributing to its observed deeper bathymetry compared to neighboring basins.

Interaction between basement detachment fault, rift onset unconformity, and overlying basin fills: An example from the Songliao basin of a Cretaceous active continental margin volcanic rift in northeast Asia

How does a giant rift basin begin? No precise examples describe this issue. Based on 7108 m of continuous coring data recovered from the whole stratigraphy of the Songliao Basin (SLB), an attempt has been made to answer this question. Through comprehensive geological, geochemical and seismic research it has been found that there is a triangular extensional domain (TED) beneath the sedimentary cover in the basement at the rift center, from where the initial rupture of the giant rift was created. The basement detachment fault (DF), rift onset unconformity (ROU), and overlying basin fills are interrelated elements of a sedimentary basin and are the key to interpreting the geological archives recorded in the basin. The interaction processes between them determine the location of the basin center and the style of basement subsidence, which reflect the tectonic properties of the basin. This interaction may have a coevolutionary relationship with the deep magmatic activities beneath the basin. The basement of a basin typically consists of a series of strata that the lower strata age older. The uppermost basement sequence of the Triassic in the SLB is particularly important for the overlying basin formation and evolution. The surface topography controlled the thickness of the overlying Cretaceous cover. An ROU and DF developed at the top and bottom of the Triassic, respectively.The long-term uplift, denudation, and subsequent volcanic deposition may be common features of an ROU in a volcanic rift basin. More so, DF is the controlling factor for basin subsidence in the syn-rift stage of basin evolution. The frequent intrusive association with graben faults suggests that sublithospheric mantle flow may affect the accommodation space of the overlying basin by cutting the basement blocks via feeder dykes and shaping the graben pattern on top of the basement.

Origin of facies-controlled dolomite and exploration significance of the Middle Permian Qixia Formation in central Sichuan Basin, Western China

The intraplatform shoal dolomite of the Middle Permian Qixia Formation is currently considered the key target of hydrocarbon exploration in the central Sichuan Basin. To systematically investigate the origin of the stratabound facies-controlled porous dolomites of the Qixia Formation, integrated petrography, logging and seismic analysis were carried out in this work. The results are as following: (1) the dolomite reservoir is universal in the central Sichuan Basin, and its distribution is controlled by intraplatform shoals, with multilayer superposition vertically. Thick massive dolostone may also develop along with the fault. (2) Three replaced dolomites and one dolomite cement were identified: very finely to finely crystalline, anhedral to subhedral dolomite (Rd1); finely to medium crystalline, anhedral to subhedral dolomite (Rd2); coarsely crystalline, subhedral to euhedral dolomite (Rd3) and coarsely crystalline saddle dolomite cement (Sd). Rd2 and Rd3 are partly fabric-retentive, and preserve the original bioclastic ghosts. Sd shows wavy extinction, filled in the breccia veins. (3) The U-Pb dating and homogenization temperatures results indicate that the dolomite and Sd cement are associated with hydrothermal event during the Emeishan large igneous province. The δ13C, 87Sr/86Sr, and seawater-like REEY patterns suggest that the dolomitization and Sd precipitation fluids originate from connate seawater heated by elevated heat-flow. (4) The ELIP triggered large scale thermal anomalies in the basin during the Dongwu movement period. The increased temperature and pressure drove the formation water in the intra-platform shoal facies and overcame the binding effect of Mg2+ hydrate. Moreover, the deep hydrothermal fluid preferentially penetrated into the porous strata of shoal facies along the faults and fractures, mixed with formation water to some extent, and extensive dolomitization occurred. The facies-controlled dolomite reservoir and the underlying Cambrian source rock form a good source-reservoir assemblage, which can be a key replacement option.

Characteristics and Genesis of Carbonate Weathering Crust Reservoirs: A Case from the Ma5Member of Ordovician in Gaoqiao Area, Ordos Basin, China.

The hydrocarbon reserves in carbonate rocks account for about half of the global hydrocarbon reserves and are an important reservoir type. The Ordovician Majiagou Formation in the central Ordos Basin is a representative weathering crust reservoir. The Caledonian movement uplifted the stratum as a whole, and subsequently, 120 million years of exposed weathering, denudation, and leaching created this unique karst paleomorphology. Dolomite reservoirs have developed dissolved pores and microfractures, which are the best reserved spaces for natural gas and good hydrocarbon migration channels. This paper takes the Ma5Member (hereinafter referred to as Ma51+2) carbonate reservoir in Gaoqiao Gas Field as the research target, based on the core, thin section, cathodoluminescence, logging data, etc., and systematically study the effect of karstification on the reservoir and the genesis of the dolomite reservoir. The results show that the depositional period of the Ordovician Majiagou strata is a regression cycle and the depositional environment is a limited evaporative tidal flat. The reservoir lithology of Ma51+2 is mainly gypsiferous dolomite and micrite dolomite. The reservoir space types consist of intergranular pores, gypsum mold pore, intragranular dissolution pores, intercrystalline pores, and microfractures. The porosity has values from 0.3 to 11.2% (mostly less than 5.0%) with an average of 3.3%, and the permeability ranges from 0.003 to 13.2 mD (mostly less than 1 mD) with an average of 0.36 mD. Karstification is divided into three periods, including syngenetic karst, eogenetic karst, and burial karst. The sedimentary microfacies determine the material basis of the reservoir, and multistage karstification finally modifies the physical properties. By deeply exploring the formation mechanism and influencing factors of the carbonate reservoir in the Ordovician Majiagou Formation, it provides an important theoretical basis and practical guidance for oil and gas exploration and development. At the same time, it also has important reference value for understanding and predicting the development law and distribution characteristics of carbonate reservoirs under similar geological background.

Characteristics of Oil and Gas Distribution and Controlling Factors of Hydrocarbon Accumulations in the Eocene Pinghu Formation of the Xihu Depression, East China Sea

The Xihu Depression at the shelf of the East China Sea is a petroliferous basin with excellent exploration potential. The Eocene Pinghu Formation has become a recent oil and gas exploration target and as the critical hydrocarbon-bearing stratigraphic layer in the basin. However, studies specifically examining the characteristics of hydrocarbon distribution and the controlling factors of reservoirs in the Kongqueting area remain limited. The lack of in-depth hydrocarbon accumulation model research restricts subsequent exploration. In this paper, based on data from drilling, 3D seismic, well test, and geochemical analysis, we found that coal bed-related hydrocarbon source rocks were widely occurred in the Pinghu Formation in the Kongqueting area. The source rocks provide good hydrocarbon supply of near-source and distant-source to reservoir. The river sands were connected laterally and stacked vertically, forming a pattern characterized by ‘lateral succession and vertical superposition’ indicative of good quality of reservoir. During the deposition period of the Pinghu Formation, two large sets of regional cap rock (P3 and P7) were excellent sealing rock. The sand reservoir was interbedded with shale layers, forming a Mille-feuille type of reservoir-seal pair. Faults formed at the early stage of the formation of basin serve as conduits for hydrocarbon migration, governing both the spatial distribution of hydrocarbon-bearing strata and the types of hydrocarbon accumulations. These faults were instrumental in facilitating the formation of extensive oil and gas accumulations. This paper establishes a hydrocarbon accumulation model in the Kongqueting area, characterized as ‘dual hydrocarbon supply from source, upper oil, and lower gas, good reservoir-seal pair, hydrocarbon migration through fault conduit’.

The Palaeozoic of a future high potential hydrocarbon fold-thrust belt through the Zagros Basin, Iran

The Zagros Fold-and-Thrust Belt is one of the world's richest hydrocarbon regions, with Palaeozoic sediments being a key element in hydrocarbon plays. The main aim of this research is to provide a model for the formation and development of the sedimentary basin during the Palaeozoic Era in the Zagros and Persian Gulf regions. We utilize data from exploratory wells and surface outcrops of Palaeozoic sediments specifically in the northern parts of Iran's Zagros Mountains. The seismic profiles of the eastern region of the Persian Gulf provide more detailed information due to their distance from the Zagros hinterland. The investigation reveals that folds with wavelengths of several tens of km were formed on the Infra-Cambrian Hormuz Salt or its equivalent décollement.This study has identified halokinetic activities as the primary cause of Palaeozoic deformations in the Zagros region, with tectonic and orogenic factors playing a secondary role. The Palaeozoic sediments are divided into pre-kinematic, syn-kinematic and post-kinematic categories. Sedimentary sequences possibly including the Palaeozoic hydrocarbon source rock could be present throughout the study area.

Sedimentary environment and major controlling factors of organic matter-rich shale from the Wufeng-Longmaxi formation in eastern Sichuan Basin, China

Sedimentary environment and major controlling factors of organic matter-rich shale from the Wufeng-Longmaxi formation in eastern Sichuan Basin, China

New age constraints reveal moraine stabilization thousands of years after deposition during the last deglaciation of western New York, USA

Abstract. The timing of the last deglaciation of the Laurentide Ice Sheet in western New York is poorly constrained. The lack of direct chronology in the region has led to a hypothesis that the Laurentide Ice Sheet re-advanced to near its Last Glacial Maximum terminal position in western New York at ∼ 13 ka, which challenges long-standing datasets. To address this hypothesis, we obtained new chronology from the Kent (terminal) and Lake Escarpment (first major recessional) moraines using radiocarbon ages in sediment cores from moraine kettles supplemented with two optically stimulated luminescence ages from topset beds in an ice-contact delta. The two optically stimulated luminescence ages date the Kent (terminal) position to 19.8 ± 2.6 and 20.6 ± 2.9 ka. Within the sediment cores, there is sedimentological evidence of an unstable landscape during basin formation; radiocarbon ages from the lowest sediments in our cores are not in stratigraphic order and date from 19 350–19 600 to 14 050–14 850 cal BP. We interpret these ages as loosely minimum-limiting constraints on ice sheet retreat. Our oldest radiocarbon age of 19 350–19 600 cal BP – from a rip-up clast – suggests ice-free conditions at that time. Above the lowest sediments there is organic-rich silt and radiocarbon ages in stratigraphic order. We interpret the lowest ages in these organic-rich sediments as minimum-limiting constraints on kettle basin formation. The lowest radiocarbon ages from organic-rich sediments from sites on both Kent and Lake Escarpment moraines range from 15 000–15 400 to 13 600–14 000 cal BP. We interpret the 5 kyr lag between the optically stimulated luminescence ages and kettle basin formation as the result of persistent buried ice in ice-cored moraines until ∼ 15 to 14 ka. The cold conditions associated with Heinrich Stadial 1 may have enabled the survival of ice-cored moraines until after 15 ka, and, in turn, climate amelioration during the Bølling period (14.7–14.1 ka) may have initiated landscape stabilization. This model potentially reconciles the sedimentological and chronological evidence underpinning the re-advance hypothesis, which instead could be the result of moraine instability and sediment mobilization during the Bølling–Allerød periods (14.7–13 ka). Age control for future work should focus on features that are not dependent on local climate.

The South Pole‐Aitken Basin: Constraints on Impact Excavation, Melt, and Ejecta

AbstractThe formation and evolution of the South Pole‐Aitken (SPA) basin is critical to relating large impact basin formation and modification to lunar geophysical evolution. Most prior models of the SPA impact were conducted in 2D, making it difficult to compare model output to the 3D crustal structure and ejecta distribution. In order to better constrain the parameters of the SPA impactor and the expected post impact distribution of crust and ejecta, we conducted numerical simulations of the SPA impact in 3D. We tested a wide range of impact parameters and constrained model results with recent geophysical data. We found the crustal structure of the SPA basin is best fit by an oblique impact (30–45°) of a 350–400 km diameter projectile impacting at 12–16 km/s. The impact excavated material from as deep as 80–120 km, and ejecta was deposited in a butterfly pattern with a forbidden region uprange of the impact.

On the delayed expression of mantle inheritance–controlled strain localization during rifting

Abstract In this paper, we explore the relative impact mantle inheritance can have on the evolution of magma-poor rift systems during the early stages of rift localization. To this end, we revisit the tectonic history of the Mesozoic Northeast Atlantic and its North Sea subdomain, analyzing these observations through comparison with results from recent analogue tectonic modeling work. Our analysis suggests that initial broadly distributed rift basin formation may be controlled by crustal inheritance, whereas the subsequent localization of deformation along deeper mantle inheritance may have caused the overprinting of previous rift basin trends in the Northeast Atlantic. This overprinting became possible as soon as the thinning of the ductile crust during progressive rifting allowed for sufficient coupling between the mantle and the upper crust. Importantly, we suggest that no changes in plate motion direction due to large-scale reorganization of the plate tectonic system are needed for differently oriented basin trends overprinting each other to develop. With these insights, we propose an updated scenario for rift kinematics in the North Sea involving continuous E-W plate divergence and provide a framework to rethink the evolution of other rift systems around the world during their early stages of rift localization.