Orthogonal Frequency Division Multiplexing Format Research Articles

A Novel OFDM Format and a Machine Learning Based Dimming Control for LiFi

This paper proposes a new hybrid orthogonal frequency division multiplexing (OFDM) form termed as DC-biased pulse amplitude modulated optical OFDM (DPO-OFDM) by combining the ideas of the existing DC-biased optical OFDM (DCO-OFDM) and pulse amplitude modulated discrete multitone (PAM-DMT). The analysis indicates that the required DC-bias for DPO-OFDM-based light fidelity (LiFi) depends on the dimming level and the components of the DPO-OFDM. The bit error rate (BER) performance and dimming flexibility of the DPO-OFDM and existing OFDM schemes are evaluated using MATLAB tools. The results show that the proposed DPO-OFDM is power efficient and has a wide dimming range. Furthermore, a switching algorithm is introduced for LiFi, where the individual components of the hybrid OFDM are switched according to a target dimming level. Next, machine learning algorithms are used for the first time to find the appropriate proportions of the hybrid OFDM components. It is shown that polynomial regression of degree 4 can reliably predict the constellation size of the DCO-OFDM component of DPO-OFDM for a given constellation size of PAM-DMT. With the component switching and the machine learning algorithms, DPO-OFDM-based LiFi is power efficient at a wide dimming range.

Analysis of Non-Hermitian symmetry (NHS) IFFT/FFT size efficient OFDM for multiple-client non-orthogonal multiple access (NOMA) visible light communication (VLC) system

Orthogonal-frequency-division-multiplexing (OFDM) format is widely deployed in visible-light-communication (VLC) systems due to its high spectral efficiency. To produce real-valued OFDM signal for VLC, Hermitian-symmetry (HS) is needed during the inverse-fast-Fourier-transform (IFFT) encoding process. However the HS requirement doubles the IFFT/FFT size and increase the encoding complexity. Non-Hermitian symmetry (NHS)-OFDM schemes are proposed, but they have different limitations. In this work, we propose and investigate a non-orthogonal multiple access (NOMA) VLC network serving 2, 3 or 4 clients simultaneously using NHS-OFDM IFFT/FFT size efficient (SE) OFDM format. Numerical analysis of signal amplitude effect to the bit-error-ratio (BER) performance for different users are performed, showing that the BER < 7% forward-error-correction (FEC) limit can be achieved as long as the required signal amplitude ratio of each user is fulfilled. We also compare the proposed system with a typical example of HS-OFDM modulation, i.e. direct-current optical (DCO)-OFDM NOMA-VLC system.

Hybrid DCO-OFDM, ACO-OFDM and PAM-DMT for dimmable LiFi

This paper proposes a hybrid orthogonal frequency division multiplexing (OFDM) modulation termed as hybrid DC-biased asymmetrically-clipped pulse-amplitude-modulated OFDM (HDAP-OFDM) for providing power efficient communication and dimming control for light fidelity (LiFi) schemes. The proposed HDAP-OFDM is a combination of three OFDM formats: DC-biased optical OFDM (DCO-OFDM), asymmetrically clipped optical OFDM (ACO-OFDM) and pulse amplitude modulated discrete multitone (PAM-DMT). In HDAP-OFDM, the lower-index subcarriers carry DCO-OFDM, while the remaining higher subcarriers carry ACO-OFDM on the odd-index subcarriers and PAM-DMT on the even-index subcarriers. Mathematical analysis shows that the required DC bias for HDAP-OFDM is a function of the required dimming levels and the root mean square of the three of its components. Furthermore, an algorithm is presented to simulate the dimming control of HDAP-OFDM. Simulations results indicate that by adjusting the proportion of subcarriers for the three OFDM/DMT elements, HDAP-OFDM can have a wide dimming range, a low peak to average power ratio, and high power efficiency. Results also show that at a bit error rate of 10−3 and a dimming range of 3%–97%, HDAP-OFDM exhibits 8 dB more optical and electrical power efficiency than existing asymmetrical hybrid optical OFDM.

Dual-Use Multicarrier Waveform for Radar Detection and Communication

The use of multicarrier waveforms, such as orthogonal frequency division multiplexing (OFDM) as used in radio communication, is gaining interest within the radar community. This paper considers the optimization of radar performance within the structure imposed by a coded OFDM format required to achieve an acceptable communication link. The dual goal of achieving both satisfactory radar and communication performance raises challenges that can be substantively addressed by combining phase coding and modulation techniques to provide the temporal and spectral structure necessary to implement simultaneous radar and communication operations.

MC-CDMA Enhanced LR-PON Using Widely Wavelength Lockable FPLD With Low Facet Reflectance

By using a widely wavelength lockable Fabry-Perot laser diode (FPLD) with low facet reflectance under intensity modulation and direct detection, a multicarrier code division multiple access (MC-CDMA) enhanced long-reach passive optical network (LR-PON) architecture is demonstrated to perform the dense-spectral-utilized transmission with orthogonal frequency division multiplexing (OFDM) format. Enlarging the power injected into the low-facet-reflectance FPLD enables the broadening of operational wavelength margins at a cost of slightly increased bit-error rate (BER). After LR-PON transmission, the signal-to-noise ratio among subcarriers strongly correlates with the frequency chirp of the wavelength-locked FPLD, which affects the allowable wavelength locking range. By substituting MC-CDMA for the typical OFDM format and using the minimum-mean-squared-error-based multicode interference cancellation processing, the BER degradation is minimized, accompanied by a 16% extension on the lockable wavelength margin achieved under 3 dBm injection. Such a widely wavelength lockable FPLD-based MC-CDMA enhances the LR-PON with a power penalty reduction of 1 dB as compared to the typical OFDM LR-PON after 60 km transmission.

Constructed MC-CDMA LR-PON With Colorless Laser Diode and Multicode Interference Cancellation DSP

Performance of multicarrier code division multiple access (MC-CDMA) long reach passive optical network (LR-PON) implemented with colorless laser diode transmitter is evaluated and compared with the same system under typical orthogonal frequency division multiplexing (OFDM) format. The relative amount of the multicode interference (MCI) in the MC-CDMA PON can be efficiently suppressed by applying the minimum mean square error based MCI cancellation processing and be analyzed in term of the error vector magnitude deviation. Due to the double sideband nature of the directly modulated colorless laser diode, both OFDM and MC-CDMA formats suffer from severe power fading after fiber transmission. Partial subcarriers in the OFDM-PON fail to reach the specified forward error correction (FEC) threshold, causing a huge performance deviation among subcarriers and a 3% data loss after 75-km transmission. In contrast, a distance transparency transmitter design for subscribers ranging from back-to-back to 50 km is achieved in the MC-CDMA PON scheme, and the received performance among subcarriers are equalized under the FEC criterion even after 75-km transmission. Therefore, the MC-CDMA exhibits superior performance when comparing with the OFDM format in the directly modulated colorless laser diode based LR-PONs.

Coherent Optical Interleaved SC-FDM Uplink Scheme for Long-Reach Passive Optical Network

In this paper, we propose a coherent optical interleaved single-carrier frequency-division multiplexing (CO-I-SC-FDM) uplink scheme for the long-reach passive optical network (LR-PON). I-SC-FDM is a modified form of orthogonal frequency-division multiplexing (OFDM) with low computational complexity and low peak-to-average power ratio (PAPR). By designing a simple encoding structure, the computational complexity of the transmitter can be reduced from O(Nlog 2 (N)) to O(N). At the probability of 10 -3 , the PAPR of the I-SC-FDM is about 10.7 dB lower than that of conventional OFDM for quadrature phase-shift keying (QPSK) modulation. We experimentally demonstrate a 10-Gb/s CO-I-SC-FDM uplink scheme over 100-km standard single-mode fiber with 1:128-way passive splitter for LR-PON. In the conventional CO-OFDM uplink scheme, the splitting ratio is only 1:64. The proposed scheme shows great potential for application in access and metro networks.

Polar-Based OFDM and SC-FDE Links Toward Energy-Efficient Gbps Transmission Under IM-DD Optical System Constraints [Invited

Recent studies have investigated the use of orthogonal frequency division multiplexing (OFDM) and single carrier frequency-domain equalization (SC-FDE) for gigabyte per second (Gpbs) short-range optical wired and wireless access networks based on direct intensitymodulation with direct detection (IM-DD). OFDM systems have an inherent high peak-to-average power ratio (PAPR). SC-FDE systems have lower PAPR and thus outperform comparable OFDM systems in terms of bit-error performance under various practical considerations, mainly the limited dynamic range of operation at the transmitter. In RF-based OFDM and SC-FDE systems, the output signal is bipolar, complex, and cannot be transmitted in IM-DD systems. Therefore, several power efficient schemes, however spectrally inefficient, have been proposed to make positive OFDM and SC-FDE signals, e.g., asymmetrically clipped optical OFDM (ACO-OFDM) and repetition and clipping optical SCFDE (RCO-SCFDE). To increase the data rate, novel OFDM and SC-FDE signal formats, called polar OFDM (P-OFDM) and polar SC-FDE (P-SC-FDE), based on a polar representation of complex symbols, are proposed. The proposed format offers twice as much spectral efficiency as state-of-the art unipolar OFDM and SC-FDE formats. Moreover, using a power allocation approach on the time-domain positive samples, the PAPR is further reduced, and the numerical evaluation of the bit-error performance under optical source power and dynamic range constraints demonstrates superior results toward Gpbs transmission.

The Dual-Electroabsorption Modulated Laser, a Flexible Solution for Amplified and Dispersion Uncompensated Networks Over Standard Fiber

We propose here a monolithically integrated dual RF access electroabsorption-modulated laser called D-EML for the generation of optical single-sideband signal for both nonreturn to zero and orthogonal frequency division multiplexing formats. The benefits of optical single-sideband over double sideband in terms of resilience against chromatic dispersion effects are presented for high-bit rate intensity modulation/direct detection transmissions over standard single mode fiber in the C-band. Both simulation and experimentation exhibit transmission distance enhancement in the case of dual modulation of the D-EML, i.e., in optical single-sideband configuration, making this optical source an interesting solution because of its low-cost, low-size, and reasonable-power consumption.

A Survey on the Successive Interference Cancellation Performance for Single-Antenna and Multiple-Antenna OFDM Systems

Interference plays a crucial role for performance degradation in communication networks nowadays. An appealing approach to interference avoidance is the Interference Cancellation (IC) methodology. Particularly, the Successive IC (SIC) method represents the most effective IC-based reception technique in terms of Bit-Error-Rate (BER) performance and, thus, yielding to the overall system robustness. Moreover, SIC in conjunction with Orthogonal Frequency Division Multiplexing (OFDM), in the context of SIC-OFDM, is shown to approach the Shannon capacity when single-antenna infrastructures are applied while this capacity limit can be further extended with the aid of multiple antennas. Recently, SIC-based reception has studied for Orthogonal Frequency and Code Division Multiplexing or (spread-OFDM systems), namely OFCDM. Such systems provide extremely high error resilience and robustness, especially in multi-user environments. In this paper, we present a comprehensive survey on the performance of SIC for single- and multiple-antenna OFDM and spread OFDM (OFCDM) systems. Thereby, we focus on all the possible OFDM formats that have been developed so far. We study the performance of SIC by examining closely two major aspects, namely the BER performance and the computational complexity of the reception process, thus striving for the provision and optimization of SIC. Our main objective is to point out the state-of-the-art on research activity for SIC-OF(C)DM systems, applied on a variety of well-known network implementations, such as cellular, ad hoc and infrastructure-based platforms. Furthermore, we introduce a Performance-Complexity Tradeoff (PCT) in order to indicate the contribution of the approaches studied in this paper. Finally, we provide analytical performance comparison tables regarding to the surveyed techniques with respect to the PCT level.

Comparison of Orthogonal Frequency-Division Multiplexing and Pulse-Amplitude Modulation in Indoor Optical Wireless Links

We evaluate the performance of three direct-detection orthogonal frequency-division multiplexing (OFDM) schemes in combating multipath distortion in indoor optical wireless links, comparing them to unipolar M-ary pulse-amplitude modulation (M-PAM) with minimum mean-square error decision-feedback equalization (MMSE-DFE). The three OFDM techniques are DC-clipped OFDM and asymmetrically clipped optical OFDM (ACO-OFDM) and PAM-modulated discrete multitone (PAM-DMT). We describe an iterative procedure to achieve optimal power allocation for DC-OFDM. For each modulation method, we quantify the received electrical SNR required at a given bit rate on a given channel, considering an ensemble of 170 indoor wireless channels. When using the same symbol rate for all modulation methods, M-PAM with MMSE-DFE has better performance than any OFDM format over a range of spectral efficiencies, with the advantage of (M-PAM) increasing at high spectral efficiency. ACO-OFDM and PAM-DMT have practically identical performance at any spectral efficiency. They are the best OFDM formats at low spectral efficiency, whereas DC-OFDM is best at high spectral efficiency. When ACO-OFDM or PAM-DMT are allowed to use twice the symbol rate of M-PAM, these OFDM formats have better performance than M-PAM. When channel state information is unavailable at the transmitter, however, M-PAM significantly outperforms all OFDM formats. When using the same symbol rate for all modulation methods, M-PAM requires approximately three times more computational complexity per processor than all OFDM formats and 63% faster analog-to-digital converters, assuming oversampling ratios of 1.23 and 2 for ACO-OFDM and M-PAM, respectively. When OFDM uses twice the symbol rate of M-PAM, OFDM requires 23% faster analog-to-digital converters than M-PAM but OFDM requires approximately 40% less computational complexity than M-PAM per processor.

Comparison of Orthogonal Frequency-Division Multiplexing and ON–OFF Keying in Direct-Detection Multimode Fiber Links

We compare the performance of several direct-detection orthogonal frequency-division multiplexing (OFDM) schemes to that of ON-OFF keying (OOK) in combating modal dispersion in multimode fiber links. We review known OFDM techniques, including dc-clipped OFDM (DC-OFDM), asymmetrically clipped optical OFDM (ACO-OFDM) and pulse-amplitude modulated discrete multitone (PAM-DMT). We describe an iterative procedure to achieve optimal power allocation for DC-OFDM and compare analytically the performance of ACO-OFDM and PAM-DMT. We also consider unipolar <i xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">M</i> -ary pulse-amplitude modulation ( <i xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">M</i> -PAM) with minimum mean-square error decision-feedback equalization (MMSE-DFE). For each technique, we quantify the optical power required to transmit at a given bit rate in a variety of multimode fibers. For a given symbol rate, we find that unipolar <i xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">M</i> -PAM with MMSE-DFE has a better power performance than all OFDM formats. Furthermore, we observe that the difference in performance between <i xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">M</i> -PAM and OFDM increases as the spectral efficiency increases. We also find that at a spectral efficiency of 1 bit/s/Hz, OOK performs better than ACO-OFDM using a symbol rate twice that of OOK. At higher spectral efficiencies, <i xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">M</i> -PAM performs only slightly better than ACO-OFDM using twice the symbol rate, but requires less electrical bandwidth and can employ analog-to-digital converters at a speed only 81% of that required for ACO-OFDM.

Spectral precoding for constant-envelope OFDM

Spectrally precoded orthogonal frequency-division multiplexing (OFDM) and constant-envelope OFDM (CE-OFDM) are two modified OFDM formats that enhance the signaling features of OFDM, while allowing for the efficient implementation by discrete Fourier transform and the insertion of guard intervals to counteract channel dispersion. The spectrally precoded OFDM signal provides very small power spectral sidelobes decaying asymptotically as f-2J-2 with J integer-valued design parameter, thereby suppressing sidelobe powers effectively and achieving higher spectral efficiency than nonprecoded rectangularly-pulsed OFDM which has power spectral sidelobes decaying asymptotically as f-2. The CE-OFDM signal exhibits a unity peak-to-average power ratio, and thus enables the efficient use of transmitter's power amplifier. In this paper, a specific CE-OFDM block signaling format is proposed to incorporate spectral precoding with an aim to suppressing sidelobe powers more effectively than conventional nonprecoded CE-OFDM. The general constraint on spectral precoding is developed to ensure that the power spectral sidelobes of the spectrally precoded CE-OFDM block signal with arbitrary data statistics decay asymptotically as f-2J-2. Some spectral codes previously found for spectrally precoded OFDM are shown to meet the constraint and thus suited for spectrally precoded CE-OFDM. Specifically, spectral performance is analyzed for the spectrally precoded CE-OFDM block signal with independent and identically distributed data to illustrate the prevailing spectral advantage. The corresponding receiver is also developed to demodulate the spectrally precoded CE-OFDM block signal over dispersive channels.

The phoney war

4G networks are on the way but operators still thinking about 3G as they decide. The interesting thing is that the technologies are, in a broad-brush way. The 4G networks would use some form of orthogonal frequency-division multiplexing (OFDM) - the same basic technology as that used in Wi-Fi wireless networks and ADSL for wired access to the Internet. As with 3G, vendors and operators are not aligning behind a single standard but are choosing to slug it out with similar but competing protocols. This time around, there are again three candidates for the wireless operators to choose from. However, observers do not give Qualcomm's successor to CDMA2000 much chance of success. Operators who were expected to stick with Qualcomm because they have CDMA2000 networks today have instead opted to go with the successor to W-CDMA or the wild card of WiMax.

A Timing Synchronization Method with Low-Volume DSP for OFDM Packet Transmission Systems

This paper proposes a simple timing synchronization method in order to design a timing synchronization circuit with low-complex and low-volume digital signal processing (DSP) for orthogonal frequency division multiplexing (OFDM) packet transmission systems. The proposed method utilizes the subtraction process for acquirement of a timing metric of fast Fourier transform (FFT) window, whereas the conventional methods utilize the multiplication process. This paper adopts the proposed method to a standardized OFDM format, IEEE 802.11a, and elucidates that the proposed one shows good transmission performance as well as the conventional one in fast time-variant multi-path Rayleigh fading channels by computer simulation.