Foliation Planes Research Articles

Tectono-thermal Evolution of the Proterozoic Mahakoshal Belt along the Northern Margin of Central Indian Tectonic Zone: Constraints from Geochemistry, Phase Equilibria Modelling and in-situ Monazite Dating from a Metapelite Sequence around Jabalpur

ABSTRACT In this contribution, geochemical signatures and petrological evolution of a folded sequence of mica schist from the Jabalpur area of the Mahakoshal Belt in the northern Central Indian Tectonic Zone (CITZ) are described. Multiple tectonic discrimination diagrams incorporating both major and trace element concentrations have constrained back-arc settings for deposition of the sedimentary units. S1 foliation formation marks the beginning of the M1 metamorphic stage. In contrast, the later M2 metamorphic event resulted in garnet and andalusite formation during heating at 2-3 kbar, followed by staurolite-sillimanite, garnet-staurolite assemblages at peak P-T conditions of 5.4 kbar, 550-600°C. Textural evidence suggests that M2 is pre-syn tectonic to D2 deformation, resulting in formation of the NE-SW trending S2 axial planar foliation. From the isopleth thermobarometry, a clockwise P-T path with near-isothermal decompression has been determined for M2. Similar results have been obtained from conventional thermo-barometry performed on multiple samples. Monazite dating (EPMA) of one of the samples suggests 1.9 Ga, age for D1-M1 event. M2 is correlated with the younger age population of monazites yielding 1.5 Ga. A clockwise P-T path constrained for M2 suggests collisional tectonics along the northern margin of the CITZ, as recorded from its southern margin.

Seismic Anisotropy and Deep Crustal Deformation Across Alaska

AbstractBased on a new seismic surface wave data set, we present a model of Alaskan crustal seismic anisotropy that provides new insight into Alaska's geographically diverse deformation history. We use both Rayleigh and Love wave isotropic phase speed and Rayleigh wave azimuthal anisotropy to estimate crustal anisotropy. Unlike traditional seismic tomography, which focuses on apparent seismic anisotropy in which the symmetry axis of anisotropy is assumed to be known, we resolve the spatial variation of inherent anisotropy by inferring the depth‐dependent tilt of the hexagonally symmetric elastic tensor. The amplitude of inherent anisotropy is typically stronger in the lower than the upper crust. We principally interpret the dip angle (plunge of the symmetry axis) or the tilt of the anisotropy foliation plane, which reflects the influence of vertically and/or horizontally oriented structures or deformation. The depth variation of crustal anisotropy appears in four principal motifs that partition Alaska into six distinct geographical regions, which display characteristic dip angle patterns in the upper and lower crust. By considering geological context, we discuss how each region reflects active or historical crustal deformation.

Devonian Andean‐type convergence in the southern Dunhuang block (NW China): Petro‐structural, metamorphic P–T and geochronological constraints

AbstractArchean to Palaeoproterozoic basement rocks exposed in the Dunhuang block in NW China were affected by Palaeozoic crustal reworking, as constrained by previous zircon U–Pb geochronological investigations. However, relationships between the Palaeozoic metamorphic ages, P–T evolution and deformational history of the region remain ambiguous. In order to address this issue, P–T–t–D paths of paragneisses from the basement of the Hongliuxia belt in the southern Dunhuang block were investigated. Inclusions in garnet and kyanite from the paragneisses are considered as vestiges of Palaeozoic M1 metamorphism corresponding to initiation of the prograde evolution. The earliest continuous metamorphic fabric is an originally steep N–S striking foliation S2. This fabric was reworked by vertical folds F3 associated with the development of a ubiquitous steep, mainly south‐dipping, E‐W striking axial planar foliation S3. The S2 foliation in paragneisses is mainly associated with Grt–St–Ky–Sil–Bt–Ms–Pl–Qz–Rt assemblages in samples from the western domain and with Grt–Ky–Sil–Bt–Kfs–Pl–Qz–Rt assemblages in samples from the northeastern domain of the Hongliuxia belt. The S3 foliation is associated with Grt–Sil–St–Bt–Ms–Pl–Qz–Ilm assemblages in the western domain and with Grt–Sil–Bt–Ms–Pl–Qz–Kfs–Ilm assemblages in the northeastern domain, followed by growth of chlorite in both domains. Early prograde stage (M1) from 4.0–6.5 kbar and 540–560°C to metamorphic peak (M2a) at 9–10 kbar and ~650–675°C is mainly recorded by paragneisses from the western domain. Subsequent decompression is initially accompanied by heating (M2b) constrained to 6.5–7 kbar and 675–710°C in the western domain, and to 6–6.5 kbar and ~730°C in the northeastern domain, followed by cooling (M3) through 4–6.5 kbar and 550–650°C till late chloritization (late M3). In situ U–Pb dating of monazite combined with monazite trace‐element compositions suggests that prograde evolution (M1) most likely started at c. 406 Ma, peak‐P conditions (M2a) were reached at 400–394 Ma, decompression associated with heating (M2b) took place at 393–391 Ma, and cooling (M3) during exhumation probably lasted from 380 to 354 Ma. The prograde metamorphism probably reflects burial during underthrusting of neighbouring continental basement (the Alxa block or an equivalent) below the Dunhuang block. This event culminated in pure shear thickening (D2a) of the whole supra‐subduction margin followed by minor heating and exhumation (D2b). The D3‐M3 event is interpreted as reflecting exhumation during orthogonal shortening of the system, possibly in response to an independent orogenic cycle. Combined with the available regional data, this study reveals the existence of a complex tectono‐metamorphic evolution for the Dunhuang block characterized by two distinct orogenic phases with (i) the thickening of a previously thinned arc‐back‐arc crust recorded in the northern and central belts at 420–410 Ma in the pro‐wedge side of the active margin (Sanweishan phase), followed by (ii) the 410–390 Ma thickening in the retro‐wedge side (Hongliuxia phase). Such a tectonic evolution of the whole Dunhuang block resembles Andean‐type migration of crustal thickening from the convergent front to hinterlands. The D3‐M3 event, potentially responsible for the juxtaposition of rocks from different geological occurrences and depths, is seemingly independent from this Andean‐type orogenic cycle.

Rock Anisotropy Promotes Hydraulic Fracture Containment at Depth

AbstractWe report laboratory experiments and numerical simulations demonstrating that the anisotropic characteristics of rocks play a major role in the elongation of hydraulic fractures (HFs) propagating in a plane perpendicular to the rocks' inherent layering (the bedding planes in sedimentary rocks and foliation planes in metamorphic rocks). Transverse anisotropy leads to larger HF extension in the parallel‐to‐layers/divider direction compared to the perpendicular‐to‐layers/arrester direction. This directly promotes vertical containment of HFs in most sedimentary basins worldwide even in the absence of any favorable in‐situ stress contrasts or other material heterogeneities. More importantly, the ratio of the energy dissipated in fluid viscous flow in the fracture to the energy dissipated in the creation of new surfaces is found to play a critical role on fracture elongation, with fracture‐energy dominated HFs being the most elongated while the viscous dominated ones remain more circular. These results open the door to a better engineering and control of HFs containment at depth in view of the competition between material anisotropy (both elastic stiffnesses and fracture toughness anisotropy) and injection parameters (fluid viscosity and rate of injection).

Combining traditional and quantitative multiscale structural analysis to reconstruct the tectono-metamorphic evolution of migmatitic basements: the case of the Valpelline Series, Dent-Blanche Tectonic System, Western Alps

Due to the ongoing development of new technologies, many instruments are available to assist geological investigations at different scales. These techniques, including 3D outcrop modelling from aerial photogrammetry and quantitative microstructural analysis are useful in crystalline basements studies. This contribution combines traditional and quantitative multiscale structural analysis techniques to the migmatitic rocks of the Valpelline Series (Dent-Blanche Tectonic System, Western Alps). Conventional structural analysis is integrated with the extraction of structural data from 3D models of representative smooth outcrops. Quantitative microstructural and mineral-chemical analyses are combined to link structural and metamorphic evolution. This approach allows identifying and correlating foliations that developed during three tectono-metamorphic stages. The first (D1) includes solid-state deformation associated with an early foliation (S1) preserved within metabasite boudins enclosed in migmatite gneiss. The second (D2) is related to the dominant foliation in migmatite gneiss (S2), coeval with the regional scale anatexis and growth of garnet and cordierite. The third (D3) is related to the late folding of S2 and the development of a sillimanite-rich axial plane foliation (S3) which wraps around garnet and cordierite. Finally, this work discusses pros and cons of each innovative methodology, still emphasising the importance of using manually acquired field data as ground control.

Transpression or polyphase deformation along craton margins: Insights from the Archean–Proterozoic boundary near Sudbury, Canada

Continental margins vary in composition and configuration, resulting in complex structural geometries during deformation. One example is the Archean–Proterozoic boundary near Sudbury, Canada, where the Creighton-Victoria Deformation Zone (CVDZ) contains both reverse dip-slip and dextral strike-slip kinematic indicators. To resolve if these structures formed during a single transpression event or multiple overprinting events, the orientation, relative timing and style of the CVDZ are compared to those of adjacent regional structures. Regional fold axes and their axial planar foliation are subparallel to the steeply-plunging stretching lineation and steeply-dipping foliation, respectively, along the CVDZ. Phase equilibria modelling of syn-tectonic staurolite-chloritoid assemblages indicates that the regional folds and foliation formed at 480–565 °C, similar to temperatures estimated for the formation of dip-slip quartz crystallographic preferred orientations (CPO) along the CVDZ. This suggests that the CVDZ, regional folds and foliation formed during the same regional folding and reverse shearing event. Major lateral lithological changes and inflections in the orientation of the craton margin controlled the formation of structures, and evidence for regional transpression, such as strike-slip kinematic indicators, steeply-plunging stretching lineation, and obliquity of regional folds with respect to major shear zones, resulted from polyphase deformation and transcurrent reactivation of the Superior craton margin.

Dehydration‐driven deformation of eclogite: Interplay between fluid discharge and rheology

AbstractAqueous fluids released during dehydration of a subducting slab have a large effect on the rheology of the subduction interface. While high‐pressure experiments and natural‐case studies link deformation with critical dehydration reactions during eclogitization, the exact interplay between these processes remains ambiguous. To investigate fluid–rock interaction and associated deformation at high‐pressure, we studied a suite of eclogites from the Tsäkkok Lens of the Scandinavian Caledonides that record prograde metamorphism within an Early Palaeozoic cold subduction zone. Our results show that in‐situ dehydration during the blueschist to eclogite facies transition produces fluid fluxes leading to rheological weakening and densification, consequently promoting ductile‐brittle deformation. Petrographic evidence, supported by thermodynamic modelling and thermobarometry, attest to a prograde passage from lawsonite‐blueschist to peak eclogite facies of ~2.5 GPa and ~620°C. Phengite‐bearing eclogites imply interaction with an externally‐derived fluid, whereas rare phengite‐free, kyanite‐eclogites only record internally‐derived fluid production. Models predict that prograde breakdown of chlorite, lawsonite and amphibole between 500 and 610°C lead to progressive dehydration and release of up to 4.6 wt.% of aqueous fluid. Microstructural data reveal elongated shapes of highly strained omphacite porphyroblasts, displaying minor yet gradual changes in misorientation towards the grain boundaries. Occasionally, these intragranular structures form subgrain cells that have similar sizes to those of neoblasts in the rock matrix. These observations point to the potential onset of dynamic recrystallization processes via dislocation creep. Moreover, the omphacite neoblasts and rutile show non‐random crystallographic preferred orientations (CPOs), which are characterized by the subparallel alignment of point‐like maxima in rutile [001] and [100] axes to those of [001] and (010) of omphacite neoblasts, respectively. Additionally, the [001] axes of these minerals are also subparallel to the weak stretching mineral lineation, and the (100) of rutile and the (010) of omphacite neoblasts are distributed in the plane of the foliation. This suggests that the development of their CPOs was coeval and structurally controlled. Garnet microfractures normal to the foliation are dilated and sealed predominantly by omphacite. The lack of obliquity between CPO and foliation plane, as well as the systematic orientation of garnet microfracture orientations, are consistent with coaxial deformation at peak‐pressure conditions. Unlike other studies, we show that neither an external fluid source nor channelized fluid flow is needed to facilitate a ductile‐brittle deformation of eclogite in a subduction setting.

Litho-Lineament Mapping of Rocks in Ila Orangun Area Southwestern Nigeria Using Remote Sensing and Aeromagnetic Data: Implications for Mineral Exploration

Ila Orangun is located north of Okemesi and falls within latitudes 7054l and 8000l N and longitudes 40 53l and 50 00l E respectively. Field studies revealed six lithological units in the study area namely quartzites, granites, granite gneiss, porphyritic granites, amphibolite schist and pegmatites. The aim of the research is to elucidate the geology and structure as well as evaluate the metallic mineral potentials of the study area. An integrated multi-technique study approach was adopted for reconnaissance survey and structural interpretation which involved the use of acquired remotely sensed satellite imageries such as Landsat-8 OLI, Shuttle Radar Topographic Mission, Radar Sentinel-2A and a geophysical method involving the use of aeromagnetic data. Results obtained from interpretation of remote sensing data was used to produce different lineament maps which displayed fractures of varying lengths and trend dominantly in the NE-SW directions and subsidiary fractures also orientate in the NW-SE, E-W and N-S directions. Results from the stereographic projection plots showed that the dominant orientation of foliation planes is in the NE-SW direction with the NE and SE sections of the study area recording the highest cluster of the foliation planes. Hence, the eastern section spotted as the mineralization zone.

Structural Analysis and Petrography of High-Grade Gneisses and Associated Mafic / Ultramafic Dikes Around Salem, Southern India

Southern Granulite Terrane (SGT) of India preserves extensive high-grade granulite facies rocks of Archaean and Proterozoic age. The SGT is divided into number of blocks by several suture/shear zone. Structural investigations on the basement gneisses and younger mafic/ultramafic dikes have been carried out within the Salem block which is part of Northern Granulite Block (NGB), north of the Cauvery Suture Zone (CSZ). The present work emphasizes various scale fold styles and other structural patterns of the area, which includes regionally metamorphosed high-grade rocks as basement for the multiple ultramafic intrusions to the north of Cauvery Suture Zone (CSZ) which highlights the finite strain geometry, complex deformation pattern and high-grade metamorphism. Structural map of the study area is prepared showing two generations of folding, namely F1 whose axial trend is NE-SW, subparallel with general trend of gneissic foliation and are tight isoclinal folds while F2 which are open folds with axial trend NW-SE.E-W structural cross section across the foliation planes, characterizes antiformal and synformal fold patterns of the basement due to varying dip directions which also reflects type-3 interference pattern of folding. Mesoscopic scale shear zones of dextral kinematics in response to E-W collision during Paleo-Meso Archean time, delta type porphyroclasts, S-C fabrics with the dextral movement of CSZ system, Riedel shear, thrust imbricates implying duplex structures, rotation of mafic boudins along shear zones are the most prominent ductile structural features of this area. Brittle structures like different sets of cross cutting joints and faults indicate younger deformation as well. Petrography of major lithologies has classified them into amphibolite gneiss, migmatite gneiss, charnockites, granulites and mylonites as basement rocks to the younger pyroxenite intrusions. Typical textures like, perthite, granulose, reaction rims, sieve textures and microstructures like S-C fabrics, kink bands, rotated porphyroclasts, etc are observed within the basement rocks. Coarse grained textures with fractured porphyroclasts of garnets indicating the water interactions and retrogradations within the granulite facies rocks. Reaction rims observed in charnockites and granulites are indicative of retrogression during shearing. The coarse grained cummulate nature of pyroxenites neither represent deformation nor metamorphism. Keywords: Southern Granulite Terrane, Salem, Structural Analysis, Mafic/Ultramafics, Dikes, Petrography

Deformation Pattern of Well-Preserved High-Pressure Rocks (SE Syros, Cyclades)

New, detailed geological/structural mapping and field-based structural analysis were carried out to investigate the deformation pattern of well-preserved high-pressure rocks of the Blueschist Unit exposed in SE Syros (Cyclades, Greece). Geological mapping revealed the occurrence of extensive alternations between different rock groups, as well as interfingering patterns in map-scale that are possibly the result of folding. The earlier ductile deformation phase recognized in the mapped area is associated with the development of a penetrative foliation, which was formed at eclogite/blueschist-facies conditions under peak metamorphism. The subsequent main deformation phase occurred under blueschist facies conditions synchronous with the early stages of exhumation of the high-pressure rocks. This phase is mainly associated with the formation of WNW-trending folds and a pervasive axial planar foliation linked with ESE-directed shearing. The main deformation ceased under blueschist-facies conditions, and exhumation of the rocks to greenschist-facies conditions took place under very weak and localized deformation. Greenschist retrogression observed in the southwestern part of the mapped area seems to be controlled by fluids, rather than by intense deformation and formation of major syn-greenschist shear zones.

Field and petrological characteristics of PGE-rich podiform chromitites: Implications for efficient exploration

Two distinct types of podiform chromitites have been extensively described within the mantle sections of Neoproterozoic ophiolites in Saudi Arabia and Phanerozoic ophiolites in Oman. The first type is concordant with the foliation plane of the harzburgite host, generally lensoidal in shape and is characterized by its low platinum-group elements (PGE) contents. The second type occurs as discordant or dike-like bodies and predominantly rich in PGE. In addition to their mode of occurrence, several lines of evidence can be employed to differentiate these two types of chromitites, both in the field and during laboratory investigations. Concordant PGE-poor chromitites are typically homogeneous in appearance (with regards to chromite grains distribution) and massive, featuring chromian spinel (Cr-spinel) with olivine as the dominant silicate inclusions. In contrast, discordant PGE-rich chromitites are often heterogeneous in appearance, exhibiting a semi-massive to disseminated, and are rich in both hydrous (amphiboles) and anhydrous (clinopyroxene) silicate inclusions. Discordant dunite veins, sharing similar petrological characteristics, are consistently associated with PGE-rich chromitites, with Cr-spinel containing a notable abundance of clinopyroxene inclusions. Compared to podiform chromitites found worldwide, concordant chromitites have lower to intermediate PGE contents (typically < 500 ppb), display a gently sloping negative trend in PGE patterns, contain very few platinum-group mineral (PGM) grains, and exhibit a wide compositional range of Cr-spinel (Cr# = Cr/(Cr + Al) atomic ratio, varying from 0.5 to 0.9). In contrast, discordant chromitites have higher PGE contents (commonly > 500 ppb), show a strong decoupling between the IPGE (Os, Ir, Ru) and PPGE (Rh, Pt, Pd) subgroups of the PGE distribution patterns, contain numerous PGM grains, and consist of high-Cr varieties (Cr# mostly > 0.6). In-situ analysis of clinopyroxene inclusions within Cr-spinel of discordant chromitites and associated dunite veins revealed characteristic U-shaped rare-earth elements (REE) patterns. This suggests the involvement of a hydrous SiO2-rich melt in the formation of PGE-rich chromitites and their associated discordant dunites. The wide range of Os-isotope composition of the Os-rich PGM, spanning from sub-chondritic to supra-chondritic 187Os/188Os values in the PGE-rich chromitites serves as further evidence for the heterogeneous hydrous melting process that led to the formation of these chromitites. These features, encompassing field and petrological characteristics, can be attributed to variations in the tectonic setting during the formation of podiform chromitites and can serve as valuable guidelines for PGE exploration.

Contractional deformation between extensional dome exhumation in Central Pamir at 17–15 Ma constrained by metamorphic and paleomagnetic data from the Bartang volcanic rocks, Tajikistan

The debated mechanism and timing of formation of the Pamir orogenic salient provides an ideal case to combine paleomagnetic and metamorphic analyses. Opposing views argue for either oroclinal bending of the Pamir since the India-Asia collision or for an originally arcuate shape, which can be tested using paleomagnetism to estimate vertical-axis rotations. Furthermore, Pamir deformation can be dated and characterized by the analysis of a well-expressed regional metamorphism. However, paleomagnetism is seldom applied to metamorphic rocks such that the significance of their rock magnetic signal with respect to deformation remains poorly understood. We studied a > 2 km thick sequence of slightly metamorphosed Cretaceous-Paleogene volcanic and volcaniclastic rocks from the western Central Pamir Mountains using metamorphic petrology, geochronology, and paleomagnetic analyses. These rocks present a medium-grade metamorphism and have undergone fine grained recrystallisation of biotite due to NW-SE compression. 40Ar/39Ar and Rb/Sr ages (∼17 to 15 Ma) on whole rock and biotite, confirm that the greenschist facies metamorphism is related to the coeval exhumation of Pamir gneiss domes during the Middle Miocene. The rocks generally show homogenous magnetic properties. High field magnetic properties and SEM/EDS data show that the main magnetic remanent carrier is titano-hematite. Thermal demagnetizations yield complex characteristic remanent magnetization with site-mean directions obtained for only 14 of the 44 studied sites but scattered mainly within the foliation plane defined by the anisotropy of magnetic susceptibility (AMS). These rocks have also unusual magnetic characteristics where strong-field isothermal remanent magnetizations induce an AMS fabric, likely related to the specific composition and structure of the metamorphic titano-hematite but independent of the original anisotropy fabrics. Combined paleomagnetic and geochronological data from the Bartang volcaniclastics rocks enable us to identify a ∼ 17–15 Ma compressive deformation event contemporaneous with the emplacement of the gneiss domes and suggest no oroclinal bending since that event.

Lattice preferred orientation of quartz in granitic gneisses from Tso Morari Crystalline Complex, Eastern Ladakh, trans-Himalaya: evaluating effect of Dauphiné twin in dynamic recrystallization during exhumation

Abstract The Tso Morari Crystalline complex (TMCC) of eastern Ladakh, India, is part of the north Indian continental margin and is characterized by eclogitic enclaves embedded within ortho- and paragneisses known as the Puga Gneiss. Two fault zones bound the TMCC: the Karzok fault to the southwest and the Zildat fault to the northeast. In the present study, we carried out Electron Backscatter Diffraction study of quartz of 10 samples collected from the Puga Gneiss. The relict and recrystallized quartz grains were treated separately to understand the deformation conditions of the Puga Gneiss during early and late deformation stages related to UHP metamorphism and final stage of exhumation during retrogression, respectively. Microstructural observations suggest dynamic recrystallization in quartz and plagioclase at different temperature ranges. Misorientation analysis of both relict and recrystallized quartz grains reveals presence of Dauphiné Twins. Lattice preferred Orientation (LPO) of &lt;c&gt; axis of relict quartz grains generally shows more than one point maxima indicating that the relict grains preserve LPO developed during different stages of metamorphism/deformation. On the other hand, LPO of &lt;c&gt; axis of recrystallized grains from Karzok and Zildat fault zones shows asymmetric single girdle either normal or at an angle to the foliation plane, which suggests simple shear. We conclude that grain size reduction and recrystallization of the Puga Gneiss was greatly influenced by Dauphiné Twin and the final exhumation of the TMCC took place in a simple shear environment aided by activity along its two binding fault zones.

Cryogenian-Ediacaran crustal growth and evolution of the active margin of the Dahomeyide belt, Ghana

AbstractThe study presents detailed petrographical, geophysical, structural and geochemical data of the internal nappes zone to establish the deformational history, origin and tectonic setting and constrain the crustal growth and evolution of the active margin of the Dahomeyide belt. Two main lithological units, (i) deformed meta-granitoids (migmatites and gneisses) and (ii) undeformed granitoids, dominate the internal nappes zone. The granitoids are generally I-type, metaluminous to weakly peraluminous, low-K tholeiite to high-K calc-alkaline and of tonalite, granodiorite and granite affinity. The overall trace element patterns of the studied granitoids characterized by the enriched LILE and depleted HFS, with negative peaks of Nb-Ta, Sr, P and Ti, are indications of arc-related magmatism. Structural analysis reveals four deformation phases (D1-D4). D1 represents Northwest-Southeast (NW-SE) Pan African shortening associated with a continent-continent collision, resulting in westward nappe stacking. Progressive NW-SE shortening resulted in D2 and D3 top-to-the-NW dextral and sinistral thrusting events during the Pan-African orogeny. D4 is an extensional event likely associated with the orogenic collapse phase. The gneisses and migmatites, with dominant axial planar foliations, point to their formation in a collisional setting or influence by the Pan-African collisional processes. Continental-arc signatures in these rocks imply continental subduction during their protolith formation. The intrusive granitoid and pegmatite are undeformed, meaning late- to post-orogenic emplacement. These findings suggest that the internal nappes zone archived the subduction-collision and post-collisional phase of the Pan-African orogeny and recorded large-scale migmatization and granitoid emplacement due to partial melting of thickened lower crust between Mid-Cryogenian and late Ediacaran.

The geology and geochemistry of the Rhyacian Josephine gold deposit, Northwest Ghana

ABSTRACT This paper focuses on the geology and geochemistry of the Rhyacian Josephine gold deposit in northwestern Ghana, where gold is primarily hosted in quartzites, with other lithologies observed, including granitoids, mafic intrusions, and gneisses. Four deformational events, DJO0, DJO1, DJO2, and DJO3, are observed. DJO0 is synonymous with the primary preserved sedimentary crossbedding in the quarzitic rocks. Gold mineralization within the deposit is mainly associated with the DJO1 NNW-trending dextral and steeply dipping sinusoidal shear zone. Gold occurs primarily as free gold and invisible gold within the lattices of the disseminated arsenopyrite along the shear foliation planes of the host rock. The ore body geometry is 15–40 m wide and strikes 800 m in the NNW direction. Silicification, sericitization, chloritization, and sulphidation are the main alteration assemblages associated with the gold mineralization zones within the Josephine deposit. Pathfinder elements for gold are stibnite, tellurium, sulphur, copper, silver, and Lead.

Silurian‐Devonian Lithospheric Thinning and Thermally Softening Along the Northern Margin of the Tarim Craton: Geological Mapping, Petro‐Structural Analysis and Geochronological Constraints

AbstractWhile the western part of northern Tarim Craton has long been considered as a Paleozoic passive margin, a pronounced Silurian‐Devonian magmatism developed on eastern part of this margin may indicate different but active margin setting. In this contribution, detailed structural mapping, petro‐structural analysis, and geochronological investigations were conducted in the Korla area, eastern part of northern Tarim Craton. Three main generations of fabrics were recognized. The earliest pervasive fabric is an originally sub‐horizontal metamorphic S1 foliation that is in part associated with migmatization characterized by high temperature/low pressure metamorphic mineral assemblages, interpreted as reflecting crustal extension. S1 foliation was affected by D2 contraction forming regional‐scale F2 upright folds associated with sub‐vertical axial planar foliation S2. D3 is marked by development of NW‐SE oriented dextral fault, asymmetric mega‐folding of S2 and spaced NW‐SE‐striking S3 foliation, likely in response to dextral transpression. Geochronological data indicate that D1 extension occurred from ca. 420 to 410 Ma, D2 contraction started around 410 Ma and lasted till 400 Ma or later, and D3 transpression was ongoing around ∼370 Ma. Integrated with regional data, an updated geodynamic model is proposed by interpreting the Central Tianshan, South Tianshan and NE Tarim Craton as an early Paleozoic supra‐subduction system. We suggest that the Silurian‐Devonian event reflects thermal softening and horizontal stretching of the supra‐subduction crust, resulting in drifting of the Central Tianshan continental arc from the proto Tarim Craton in association with opening of the South Tianshan back‐arc basin in‐between.

Experimental insights into factors influencing Vp/Vs ratios at the Nevado del Ruiz Volcano, Colombia

Measurements of ultrasonic elastic waves were carried out at atmospheric and in-situ pressure conditions on rock samples from Nevado del Ruiz Volcano (NRV). The study focuses on Vp/Vs as a function of Vp as indicators of mineralogy, porosity, fluid-types and anisotropy. We find that Vp/Vs can separate the effect of microcracks vs. vesicles as a function of fluid type and effective pressures. Little-to-no pressure dependence in Vp/Vs suggest that the rock porosity is mainly comprised by vesicles, while largely varying Vp/Vs vs Vp is associated to cracks. This effect occurs under both, dry and fluid saturation conditions. When cracks close, the Vp/Vs values are representative of the rock mineralogy. Finally, as foliation results in a wide range of Vp/Vs, which could lead to misinterpretations. For instance, on NRV foliated rocks, Vp/Vs at dry conditions and parallel to the foliation plane ranges at values which are commonly associated to fluid saturation.

Tonian Continental Arc Magmatism of the Porongos Complex, Dom Feliciano Belt, Southern Brazil

This study provides new information on the deformation, metamorphism, and tectonic setting of the metavolcanic rocks of the southern portion of the Porongos Complex, southern Brazil. The structural analysis enabled the identification of three deformational phases, formed under ductile to semi-ductile conditions. D1 progressed through deformation partitioning, comprising closed to isoclinal folds and an axial plane foliation. Then, simple shear prevailed, resulting in isoclinal folds, sigma-type porphyroclasts, foliation transposition, and mylonitic rocks. D2 comprises open to gentle folds and an axial plane cleavage. The formation of shear bands is ascribed to the semi-ductile D3. The mineral assemblage represented by phengite + chlorite + clinozoisite-epidote + actinolite + albite + quartz associated with the temperatures obtained through the chlorite geothermometer (316°C) indicates greenschist facies conditions. The protoliths of these metavolcanic rocks are geochemically discriminated as calc-alkaline, dacite-to-rhyodacite, with peraluminous compositions. The bulk trace element compositions show enrichment in large-ion lithophile elements and light rare-earth elements and depletion in heavy rare-earth elements. Also, negative Nb, P, Ti, and Ta anomalies are observed in the multielement diagram. All these geochemical features are typical of rocks formed in continental magmatic arcs. Geochemical comparison with other pre-collisional Tonian orthometamorphic rocks from the Dom Feliciano Belt demonstrates strong similarities, which corroborates the prior interpretation of a continental arc setting for the origin of these Tonian rocks.

Microstructural Insights into the Evolution of Ophiolitic Chromite from Luobusha

The podiform chromitite found within the Luobusha ophiolite comprises characteristic nodules and massive chromitites. However, the exact origin of these formations remains a topic of ongoing debate. In this study, the microstructures of olivine and chromite are investigated to unravel their formation processes and shed light on the associated geodynamic mechanisms. EBSD analysis provides insights into chromitite and host peridotite deformation mechanisms. Olivine grains in the host dunite and nodular chromite exhibit crystallographic preferred orientations (CPOs) with D-type fabrics, which show a girdle distribution in the [010] and [001] axes, normal to the foliation plane of the sample. The massive and disseminated chromitite displays B-type and C-type olivine fabric, with a concentration of [001] axes parallel to the lineation of the sample. Crystal plastic deformation can be observed in the Luobusha chromite grains, highlighting intercrystalline deformation processes. Small grains lacking misorientation observed in the massive chromitite are likely attributed to heterogeneous nucleation. Chromite nodules are found to be a patchwork of subgrains with various orientations and high-angle boundary misorientation. The formation of Luobusha chromitite involves deep-seated crystallization, followed by amalgamation, and subsequent deformation within the mantle peridotite. These findings distinguish Luobusha chromitite from other ophiolitic chromite deposits, offering valuable insights into the deformation history and formation processes.

Structural and geochronological constraints on the Portalegre shear zone: Implications for emerald mineralization in the Borborema Province, Brazil

Shear zones serve as efficient conduits for driving mineralizing fluids within the crust. In the Borborema Province, northeastern Brazil, emerald occurrences are associated with zones of strike-slip deformation that formed during the final stages of the Neoproterozoic-Cambrian Brasiliano orogeny. We present aeromagnetic, structural, and geochronologic data across the Portalegre shear zone to understand emerald formation at the Paraná deposit. In this region, shear zones are marked by conspicuous aeromagnetic anomalies that coincide with mapped mylonitic gneisses and schists showing a vertical to sub-vertical foliation and horizontal mineral stretching lineation. Dextral motion of the shear zone is indicated by deformed asymmetric augen, pegmatite boudins, and S–C and S–C–C’ fabrics. Emerald is found in phlogopite and actinolite-phlogopite schists, and prismatic crystals occur parallel to the schist foliation plane. Deformation temperatures in the range of 390–530 °C are supported by microstructural analysis as evidenced by quartz recrystallization controlled by subgrain rotation. Zircon U–Pb ages of veins and boudins of granitic composition interleaved with the schist yielded isotopic analyses of ca. 2.20–2.21 Ga, suggesting intense reworking of the orthogneissic basement (Caicó Complex) during ore formation. Phlogopite 40Ar/39Ar analysis yielded ages of ca. 524–528 Ma for the mineralized phlogopite schist, the best estimation for the emerald mineralization at the Paraná deposit. Integration of available data implies a tectonic magmatic-related origin for the deposit, involving the formation of the emerald-bearing phlogopite schists after metasomatic interactions between Cambrian Be-bearing pegmatite dykes and amphibolite lenses of the Caicó Complex during strike-slip motion on the Portalegre shear zone.