Foliar Treatments Research Articles

A comprehensive study on the effect of foliar mineral treatments on grapevine epiphytic microorganisms, flavonoid gene expression, and berry composition

Foliar treatments with mineral-based compounds have aroused interest as a sustainable approach to cope with high-temperature stress in vineyards, improving the colour of grapes and wines without altering the sugar concentration. Since berry-associated microorganisms are crucial for wine production, composition and stability, the present study aims to unravel the effects of kaolin and zeolite treatments on berry quality, flavonoid gene expression and epiphytic microorganisms (total fungi, Hanseniospora uvarum, Metschnikowia pulcherrima, plant-associated bacteria and lactic acid bacteria). Experiments were performed on 'Sangiovese' during ripening in two growing seasons (2019 and 2020). Both mineral treatments were able to cause the elicitation of several flavonoid-related genes and to increase the anthocyanin concentration in berries without an alteration of the final technological maturity (TSS, TA, pH) of the grapes. Interestingly, neither kaolin nor zeolites negatively affected the analysed microbial population at harvest despite transient alterations observed in the more stressful year (2019). These results support the use of foliar mineral treatments to increase anthocyanin concentration in grape berries and protect them from excessive heat without altering their native microorganisms.

Influence of Urea Foliar Nutrition and Leaf Harvesting Intensity on Growth, Yield Attributes and Yield in Cowpea [Vigna unguiculta (L.) Walp.

A field experiment was undertaken at Farming Systems Research Station (FSRS), Sadanandapuram, Kollam district, Kerala Agricultural University in summer 2022 for studying the effect of growth, yield attributes and yield of cowpea through foliar application of 2% urea and intensity of leaf harvesting. Experimental treatments comprised of 4 levels of foliar nutrition management (2% urea spray at vegetative stage (f1), 2% urea spray at flowering stage (f2), 2% urea spray at vegetative stage and flowering stage (f3), water spray control (f4) and 3 levels of leaf harvest (20% leaf harvest (l1), 40% leaf harvest (l2), and no leaf harvest (l3). Among the foliar nutrition management treatments, f3 showed significantly the taller plants (91.97 cm), more number of branches (15.13), leaves (34.76), leaf area/ plant (884.29 cm2), leaf area index (1.96) dry matter production (42.39 g) and chlorophyll content (3.544 mg/g) and were comparable with f1. The nodule parameters such as nodule number (37.44) and effective number of nodules (32.11) were the highest in treatment f3 and was on par with f1. Further, days to 50 per cent flowering (53.65 days), pod length (17.27 cm), 100 seed weight (12.40 g), pod number (24.58), foliage yield (1484.57 kg ha-1), grain yield (925.85 kg ha-1) and haulm yield (2722.70 kg ha-1) were the highest in treatment f3 and was on par with f1 except for pod weight (21.19 g). Among the leaf harvest intensity, treatment l3 recorded the taller plants (92.45 cm), leaf area per plant (902.71cm2) leaf area index (2.01), less days to 50% flowering (47.60 days) and haulm yield (2754.85 kg ha-1). It was on par with l1 pertaining to plant height. The number of branches (15.03), dry matter production per plant (40.78g), pod weight/plant (19.43 g), pod number/plant (23.59) and grain yield (925.85 kg ha-1) were the highest in treatment l1.

Physiological, biochemical and hormonal response of wheat cultivars to foliar application of growth stimulants and zinc nano-chelate under water deficit stress

To investigate the effect of different foliar application treatments to improve drought tolerance in wheat genotypes, a factorial split-plot experiment was conducted based on the randomized complete block design with 3 replications in 2 locations. The main factor was irrigation (normal and water deficit) and the secondary factors were 4 levels of foliar application (control: without foliar application, jasmonic acid, zinc nano-chelate and succinate) and 3 genotypes of barley. Water deficit stress reduced the content of chlorophyll a (9.03%), chlorophyll b (6.66%), total chlorophyll (7.32%) and auxin (4.21%) and increased the catalase (18.18%), superoxide dismutase activity (23.35%), malondialdehyde (7.17%), glucose (5.35%), fructose (4.85%) and sucrose (14.99%) versus normal irrigation conditions. Foliar application of zinc nano-chelate increased chlorophyll a, chlorophyll b, total chlorophyll and fructose content by 15.45%, 15.76%, 14.70% and 41.35% respectively. The highest content of chlorophyll a, chlorophyll b and total chlorophyll was assigned to the Mihan cultivar. Foliar application with zinc nano-chelate in both environments resulted in the highest biological yield and grain yield and the lowest content of abscisic acid. Foliar application line 9 genotypes with zinc nano-chelate had the highest auxin, cytokinin, catalase and superoxide dismutase activity. While foliar application of nano-zinc chelate in the Mihan cultivar led to the highest biological yield, grain yield, glucose content and the lowest amount of malondialdehyde. Therefore, foliar application of zinc nano-chelate along with the appropriate variety can improve grain yield under different environmental conditions.

Soil and Foliar Zinc Biofortification of Triticale (x Triticosecale) under Mediterranean Conditions: Effects on Forage Yield and Quality.

Zinc (Zn) deficiency represents a significant global concern, affecting both plant and human health, particularly in regions with Zn-depleted soils. Agronomic biofortification strategies, such as the application of Zn fertilizers, offer a cost-effective approach to increase Zn levels in crops. This study aimed to assess the efficacy of soil and foliar Zn biofortification, applied as an aqueous solution of 0.5% zinc sulphate (ZnSO4·7H2O), on triticale (x Triticosecale) grown under Mediterranean conditions. The study was conducted over two growing seasons (2017/18 and 2018/19) in southern Spain, evaluating the effects on biomass yield; forage quality, including crude protein, Van Soest detergent fiber, organic matter digestibility, and relative forage value; and nutrient accumulation. Soil treatment consisted in the application of 50 kg of ZnSO4·7H2O ha-1 solely at the beginning of the first campaign to assess the residual effect on the second year. In contrast, the foliar treatment consisted of two applications of 4 kg of ZnSO4·7H2O ha-1 per campaign, one at the beginning of tillering and the other at the appearance of the first node. The foliar application increased the Zn content of the forage to adequate levels, while the soil application resulted in a 33% increase in biomass production, which is particularly beneficial for farmers. Overall quality was favored by the combined soil + foliar application, and no adverse antagonistic effects on other nutrients were detected. Instead, a synergistic interaction between Se and Zn was observed, which improved the efficacy of this important micronutrient for livestock and human wellbeing.

Biostimulant and Arbuscular Mycorrhizae Application on Four Major Biomass Crops as the Base of Phytomanagement Strategies in Metal-Contaminated Soils.

Using contaminated land to grow lignocellulosic crops can deliver biomass and, in the long term, improve soil quality. Biostimulants and microorganisms are nowadays an innovative approach to define appropriate phytomanagement strategies to promote plant growth and metal uptake. This study evaluated biostimulants and mycorrhizae application on biomass production and phytoextraction potential of four lignocellulosic crops grown under two metal-contaminated soils. Two greenhouse pot trials were setup to evaluate two annual species (sorghum, hemp) in Italy and two perennial ones (miscanthus, switchgrass) in China, under mycorrhizae (M), root (B2) and foliar (B1) biostimulants treatments, based on humic substances and protein hydrolysates, respectively, applied both alone and in combination (MB1, MB2). MB2 increased the shoot dry weight (DW) yield in hemp (1.9 times more), sorghum (3.6 times more) and miscanthus (tripled) with additional positive effects on sorghum and miscanthus Zn and Cd accumulation, respectively, but no effects on hemp metal accumulation. No treatment promoted switchgrass shoot DW, but M enhanced Cd and Cr shoot concentrations (+84%, 1.6 times more, respectively) and the phytoextraction efficiency. Root biostimulants and mycorrhizae were demonstrated to be more efficient inputs than foliar biostimulants to enhance plant development and productivity in order to design effective phytomanagement strategies in metal-contaminated soil.

Zinc biofortification of wheat through fertilizer and genotype management

This study investigated the responses of two wheat varieties, Alvand (Zn-inefficient) and Pishtaz (Zn-efficient), to various zinc (Zn) fertilization methods to determine optimal strategies for enhancing wheat growth and grain quality. The primary aim of this research was to evaluate the effects of various Zn fertilization strategies, including foliar applications of Zn sulfate and Zn-EDTA with and without urea, as well as synthetic Zn amino acid complexes, along with soil applications of Zn sulfate, on the yield and nutritional quality of grains in these two contrasting wheat varieties. The results revealed that wheat varieties responded differently to Zn treatments. While Alvand showed a promising trend of elevated grain yield with foliar zinc sulfate application, Pishtaz exhibited a stronger response to foliar treatments like Zn-Met and Zn-EDTA + urea. Yield components as 1000-grain weight and spike weight, were significantly influenced by Zn fertilization. Foliar application of zinc sulfate + urea enhanced 1000-grain weight in Alvand, whereas Zn-EDTA + urea substantially increased spike weight in Pishtaz. Soil application of zinc sulfate was found to be as an effective method to enhance grain Zn content. Furthermore, the Zn concentrations in flour, straw, bran, and roots elucidated the complex patterns of Zn distribution among various plant tissues. Soil applications were particularly effective in increasing Zn levels in flour and bran, while foliar treatments influenced Zn content in straw and roots. Overall, this research highlights the importance of Zn fertilization strategies for different wheat varieties biofortification. These findings can provide practical implications for sustainable wheat production, addressing Zn deficiency challenges, and advancing food security worldwide. Further exploration into the underlying mechanisms of these responses is encouraged to refine Zn management practices for wheat cultivation.

Effect of Soil and Foliar Nitrogen Fertilization on Performance and Economics of Linseed (Linum usitatissimum L.) Cultivation under Rainfed Conditions of Nagaland

Background: Crop production relies heavily on essential nutrients. Balanced soil-applied fertilizers, along with foliar sprays, can improve input efficiency and crop performance, particularly in rainfed areas prone to moisture stress. Method: A field investigation was conducted at the experimental farm of School of Agricultural Sciences, Nagaland University, Medziphema campus, during rabi season of 2021. The experiment was laid out in split plot design with three replications with four main factors comprising of soil-application of different doses of N (nitrogen) in two splits (based on RDF of 40 kg N ha-1) viz., 100 % N, 75% N, 50% N and 25% N and five sub-factors comprising of foliar sprays of N viz. Control (water spray), single spray of Nanourea @ 3 ml liter-1, two sprays of Nanourea @ 3 ml liter-1, single spray of Urea @ 2% and two sprays of Urea @ 2 %. Result: Among the different soil application treatments, significantly highest NUE (Agronomic Efficiency), seed yield (996.80 kg ha-1) and stover yield (3032.10 kg-1) was recorded with soil application of 100 % N ultimately recording the highest net return (Rs. 26004 ha-1) and IBCR (5.80). Whereas, two sprays of Nanourea @ 3 ml L-1, among foliar treatments, recorded the highest NUE (Agronomic Efficiency), seed and stover yield (918.44 kg ha-1 and 3032.26 kg ha-1 respectively) as well as net returns (Rs. 22988 ha-1) and IBCR (5.5).

Salicylic acid and iron-oxide nanoparticles improved the growth and productivity of ajowan under salt stress

Two factorial experiments with randomized complete block design in three replicates were conducted in a greenhouse at the University of Tabriz to investigate the individual and combined effects of SA and Fe2O3-NPs spray (1 mM and 3 mM, respectively) on cations contents, root and shoot growth, seed filling and yield parameters of salt-stressed ajowan plants (0, 4, 8 and 12 dS m-1 NaCl; as non-saline and low, moderate and high salinities, respectively). Salt stress enhanced Na+ contents and reduced K+ and Ca2+ contents, and K+/Na+ and Ca2+/Na+ ratios, leading to a reduction in root and shoot growth, particularly under high salinity. Reduction in plant growth parameters under salt stress had a negative impact on yield components and seed yield of ajowan. These deleterious impacts of salinity on plants were largely overcome by foliar treatments, particularly by SA + Fe2O3-NPs. The improvement of seed yield by these treatments was highly correlated with enhanced root and shoot growth, seeds per plant, and 1000-seed weight, especially under moderate and high salinities. Thus, the simultaneous application of SA and Fe2O3-NPs was the best foliar treatment for enhancing the growth and productivity of ajowan plants under normal and saline conditions.

Sodium nitroprusside as a signal molecule for up-regulating membrane characteristics, antioxidant defense system to improve flax productivity under water stress

Water stress is a critical environmental adversity that significantly impacts the growth, development, and yield of flax plants. In this study, flax seeds were cultivated under different water irrigation requirements (WIR) (100%, 75%, and 50%) to investigate the effects of exogenously supplied nitric oxide (NO) donor sodium nitroprusside (SNP) as foliar treatments at concentrations of 0.0 ​mmol/L, 0.5 ​mmol/L, 1.0 ​mmol/L, and 2.0 ​mmol/L. Drought stress led to a significant decrease in plant growth, photosynthetic pigments, yield components such as oil and total carbohydrate percentage. It also resulted in an increase in leaf H2O2 production, lipid peroxidation levels and activities of enzymatic antioxidants including polyphenol oxidase, superoxide dismutase, and nitrate reductase enzymes. However, foliar application of SNP improved photosynthetic pigments and antioxidant defense system which mitigated the negative impact of water stress on growth and yield productivity by reducing oxidative damage caused by reactive oxygen species accumulation. The use of SNP also decreased H2O2 accumulation levels, lipid peroxidation levels, and improved membrane stability. SNP treatment at concentration of 2 ​mmol/L showed superior results compared to other concentrations with extremely significant increases observed in yield characteristics such as oil content, total carbohydrate percentages, and unsaturated fatty acids to saturated fatty acids ratio.

Facing climate change: plant stress mitigation strategies in agriculture.

Climate change poses significant challenges to global agriculture, with rising temperatures, altered precipitation patterns, and increased frequency of extreme weather events threatening crop yields. These changes exceed the adaptability thresholds of many crops, decreasing their yield and threatening food security. At plant physiological levels, climate change-induced stressors disrupt photosynthesis, growth, and reproductive processes, contributing to a reduced productivity. Furthermore, the negative impacts of climate change on agriculture are exacerbated by anthropogenic factors, with agriculture itself contributing significantly to greenhouse gas emissions. To mitigate these challenges, various approaches have been explored. This work reviews the most important physical, chemical, and biological strategies most commonly used in a broad range of agricultural crops. Among physical strategies, increasing water use efficiency without yield reduction through different irrigation strategies, and the use of foliar treatments with reflective properties to mitigate the negative effects of different stresses have been proven to be effective. Concerning chemical approaches, the exogenous treatment of plants with chemicals induces existing molecular and physiological plant defense mechanisms, enhancing abiotic stress tolerance. Regarding biological treatments, plant inoculation with mycorrhiza and plant growth-promoting rhizobacteria (PGPR) can improve enzymatic antioxidant capacity and mineral solubilization, favoring root and plant growth and enhance plant performance under stressful conditions. While these strategies provide valuable short- to medium-term solutions, there is a pressing need for new biotechnological approaches aimed at developing genotypes resistant to stressful conditions. Collaborative efforts among researchers, policymakers, and agricultural stakeholders are essential to ensure global food security in the face of ongoing climate challenges.

Application of 2-Iminoselenazolidin-4-Ones (ISeA) for Beta vulgaris L. and Brassica rapa L. Plants Se-Biofortification

Due to widespread selenium deficiency in food the aim of this study was to evaluate the effectiveness of a new Se(II)-containing organic chemical compound 2-iminoselenazolidin-4-ones (ISeA) in the form of a nanoscale associate (1–5 nm) solution for Swiss chard and komatsuna plants biofortification. Application of the chosen substance as a foliar treatment (2 mg·L−1) and as an additive to a hydroponic nutrient solution (10 mg·L−1) was performed. Both cultures had a high level of Se absorption, distribution and accumulation in leaves two or more times greater than in petioles. Se content in chard petioles (15 mg·L−1) when applying ISeA as a component of the nutrient solution exceeded the accumulation of Se during foliar treatment (9.6 mg·L−1) and the same trend in the komatsuna leaves was observed. When applying ISeA to the nutrient solution, an increase in komatsuna and chard biomass was seen at 36 and 68% and for leaf treatment by 21 and 45%, respectively. For komatsuna and chard an increase in the ratio of dry to fresh weight was also observed to be 27 and 26%, and for foliar treatment—0 and 16%, respectively. Treatments led to increase in chard plants height (7–17%), enlargement of leaves (19–42%), a rise in photosynthetic pigments (20–60%) and anthocyanin (2.9 and 2.2 times) concentration, and for komatsuna—the multiplication of leaves number (28%) and their surface area (27–29%) as well as a rise in the concentration of anthocyanin (1.0 and 1.6 times) with foliar treatment and nutrient solution enrichment.

Evaluation of morphophysiological characteristics of wheat genotypes in different foliar spraying treatments under normal conditions and salinity stress

Evaluation of morphophysiological characteristics of wheat genotypes in different foliar spraying treatments under normal conditions and salinity stress

Foliar application of various biostimulants produces contrasting response on yield, essential oil and chemical properties of organically grown sage (Salvia officinalis L.).

Sage (Salvia officinalis L.) is a medicinal and aromatic plant (MAP) belonging to the Lamiaceae family. Its morphological, productive and chemical characteristics are affected by abiotic and biotic factors. The use of biostimulants seems to be one of the most interesting innovative practices due to fact they can represent a promising approach for achieving sustainable and organic agriculture. Despite a large application in horticulture, the use of biostimulants on MAPs has been poorly investigated. On this basis, a field experiment in a 2-year study was done to assess the effect of foliar treatments with different types of biostimulants (containing seaweeds, fulvic acids and protein hydrolysates) and two frequencies of application on morphological, productive, and chemical characteristics of S. officinalis grown organically in Mediterranean environment. Morphological, productive, and chemical parameters were affected by the factors. The biostimulant application generated higher plant height, chlorophyll content, relative water content, biomass yield and essential oil yield compared to control plants. In addition, more frequent application of biostimulants produced higher biomass and essential oil yield. The application of fulvic acid and protein hydrolysates every week produced the highest total fresh yields (between 3.9 and 8.7 t ha-1) and total dry yields (between 1.3 and 2.5 t ha-1). The essential oil yield almost doubled (33.9 kg ha-1) with a higher frequency of protein hydrolysates application. In this study, 44 essential oil compounds were identified, and the frequency factor significantly influenced the percentage of 38 compounds. The highest percentage of some of the most representative monoterpenes, such as 1,8-cineole, α-thujone and camphor, were observed in biostimulated plants, with average increases between 6% and 35% compared to control plants. The highest values for total phenolics, rosmarinic acid, antioxidant activity were obtained in control plants and with a lower frequency of biostimulant applications. This study emphasizes how biostimulant applications may be used to improve sage production performance and essential oil parameters when produced in agricultural organic system. At the same time, biostimulants application caused a decrease in total phenolic, antioxidant activity and rosmarinic acid values.

Alleviating salinity stress in canola (Brassica napus L.) through exogenous application of salicylic acid

Canola, a vital oilseed crop, is grown globally for food and biodiesel. With the enormous demand for growing various crops, the utilization of agriculturally marginal lands is emerging as an attractive alternative, including brackish-saline transitional lands. Salinity is a major abiotic stress limiting growth and productivity of most crops, and causing food insecurity. Salicylic acid (SA), a small-molecule phenolic compound, is an essential plant defense phytohormone that promotes immunity against pathogens. Recently, several studies have reported that SA was able to improve plant resilience to withstand high salinity. For this purpose, a pot experiment was carried out to ameliorate the negative effects of sodium chloride (NaCl) on canola plants through foliar application of SA. Two canola varieties Faisal (V1) and Super (V2) were assessed for their growth performance during exposure to high salinity i.e. 0 mM NaCl (control) and 200 mM NaCl. Three levels of SA (0, 10, and 20 mM) were applied through foliar spray. The experimental design used for this study was completely randomized design (CRD) with three replicates. The salt stress reduced the shoot and root fresh weights up to 50.3% and 47% respectively. In addition, foliar chlorophyll a and b contents decreased up to 61–65%. Meanwhile, SA treatment diminished the negative effects of salinity and enhanced the shoot fresh weight (49.5%), root dry weight (70%), chl. a (36%) and chl. b (67%). Plants treated with SA showed an increased levels of both enzymatic i.e. (superoxide dismutase (27%), peroxidase (16%) and catalase (34%)) and non-enzymatic antioxidants i.e. total soluble protein (20%), total soluble sugar (17%), total phenolic (22%) flavonoids (19%), anthocyanin (23%), and endogenous ascorbic acid (23%). Application of SA also increased the levels of osmolytes i.e. glycine betaine (31%) and total free proline (24%). Salinity increased the concentration of Na+ ions and concomitantly decreased the K+ and Ca2+ absorption in canola plants. Overall, the foliar treatments of SA were quite effective in reducing the negative effects of salinity. By comparing both varieties of canola, it was observed that variety V2 (Super) grew better than variety V1 (Faisal). Interestingly, 20 mM foliar application of SA proved to be effective in ameliorating the negative effects of high salinity in canola plants.

A Physiological and Molecular Docking Insight on Quercetin Mediated Salinity Stress Tolerance in Chinese Flowering Cabbage and Increase in Glucosinolate Contents.

The present study was performed to investigate the negative impact of salinity on the growth of Chinese flowering cabbage (Brassica rapa ssp. chinensis var. parachinensis) and the ameliorative effects of quercetin dihydrate on the plant along with the elucidation of underlying mechanisms. The tolerable NaCl stress level was initially screened for the Chinese flowering cabbage plants during a preliminary pot trial by exposing the plants to salinity levels (0, 50, 100, 150, 200, 250, 300, 350, and 400 mM) and 250 mM was adopted for further experimentation based on the findings. The greenhouse experiment was performed by adopting a completely randomized design using three different doses of quercetin dihydrate (50, 100, 150 µM) applied as a foliar treatment. The findings showed that the exposure salinity significantly reduced shoot length (46.5%), root length (21.2%), and dry biomass (32.1%) of Chinese flowering cabbage plants. Whereas, quercetin dihydrate applied at concentrations of 100, and 150 µM significantly diminished the effect of salinity stress by increasing shoot length (36.8- and 71.3%), root length (36.57- and 56.19%), dry biomass production (51.4- and 78.6%), Chl a (69.8- and 95.7%), Chl b (35.2- and 87.2%), and carotenoid contents (21.4- and 40.3%), respectively, compared to the plants cultivated in salinized conditions. The data of physiological parameters showed a significant effect of quercetin dihydrate on the activities of peroxidase, superoxide dismutase, and catalase enzymes. Interestingly, quercetin dihydrate increased the production of medicinally important glucosinolate compounds in Chinese flowering cabbage plants. Molecular docking analysis showed a strong affinity of quercetin dihydrate with three different stress-related proteins of B. rapa plants. Based on the findings, it could be concluded that quercetin dihydrate can increase the growth of Chinese flowering cabbage under both salinity and normal conditions, along with an increase in the medicinal quality of the plants. Further investigations are recommended as future perspectives using other abiotic stresses to declare quercetin dihydrate as an effective remedy to rescue plant growth under prevailing stress conditions.

The Effect of Fertilizers and Growth Regulators on the Productivity of Safflower (Carthamus tinctorius L.) in the Dry Climate of Russia

Background: Safflower is an oilseed crop capable of forming seeds in extreme conditions, so it can be used as an alternative to sunflower, because their growing technologies are similar. Increasing the yield of safflower seeds can be achieved intensively using agrochemicals. The proposed research results provide information on the use of mineral, micro fertilizers and growth regulators. Methods: Research was carried out in the dry steppe zone of chestnut soils. In the spirit-factor experiment, which was located on a field with an area of 300 m2, in triplicate, using two sorts of safflower. Mineral fertilizers were applied to the soil during sowing and by foliar treatment during the “budding” phase. The obtained yield results were processed by analysis of variance. Result: As a result of the research, elite safflower seeds were obtained using one of the experimental options Ultamag Bor 30 g + Biostim Growth 30 g/10 liters of water of the Alexandrite variety with a yield of 1.8 t/ha with the highest profitability of their production of 414.2%. Analysis of variance of the yield data from the experiment showed that 87% of the yield of safflower seeds depended on the use of mineral fertilizers, 0.62% on the plant variety and agro technical measures for growing safflower plants-11.8%.

Glutamic-N,N-Diacetic Acid as an Innovative Chelating Agent in Microfertilizer Development: Biodegradability, Lettuce Growth Promotion, and Impact on Endospheric Bacterial Communities

The search for new biodegradable fertilizers to increase the productivity of agricultural plants is an urgent task. In this study, a complex microfertilizer was developed based on a chelating agent—glutamic-N,N-diacetic acid (GLDA). The evaluation encompassed assessments of biodegradability and effectiveness in fostering lettuce plant growth in hydroponic and conventional soil settings. The impact on endospheric bacteria, a sensitive indicator, was also examined. Results indicated a 59.8% degradation rate of the GLDA complex on the 28th day. The most notable positive effects were observed in above-ground plant biomass, with a 4.6-fold increase for hydroponics and 1.5 to 1.8-fold increases for root and foliar treatments in soil. In hydroponics, GLDA-treated plants showed 24 and 45 operational taxonomic units (OTUs) for leaves and 272 and 258 for roots (GLDA-treated and control plants). In soil, the OTU counts were 270 and 101, 221 and 111, and 198 and 116 in the leaves and roots of GLDA-treated and control plants (under root and foliar treatments), respectively. Non-metric multidimensional scaling (NMDS) and Indicator Species Analysis (ISA) demonstrated significant distinctions in endospheric communities between substrates (hydroponics and soil) in the presence of GLDA. Importantly, GLDA use simplified the composition of endospheric bacterial communities.

Chitosan nanoparticle encapsulation of celery seed essential oil: Antifungal activity and defense mechanisms against cucumber powdery mildew

The objective of the current study was to explore the antifungal potential of celery seed essential oil (CSEO) in a nano-carrier system against Podosphaera fusca, the causal agent of cucumber powdery mildew. We assessed the physicochemical characterization of CSEO-loaded chitosan nanoparticles (CSEO-LCNPs) using dynamic light scattering, field emission scanning electron microscopy, and Fourier transform infrared spectroscopy. The successful loading of various concentrations of CSEO into chitosan nanoparticles (1:0, 1:0.25, 1:0.5, 1:0.75, and 1:1) has been verified. The particles exhibited a spherical shape, with an average diameter of 113 nm, and a negatively charged surface with a zeta potential of -31.5 mV. The Korsmeyer-Peppas model well described the release behavior of CSEO from nanoparticles. Additionally, we examined the defense mechanism, as well as biochemical/molecular responses following foliar treatment with CSEO-LCNPs. In vivo, results revealed that CSEO-LCNPs foliar application on the cucumber seedlings inoculated with P. fusca significantly reduced the disease severity of powdery mildew. Treatment with CSEO-LCNPs led to an increase in phenolic and flavonoid compounds, chlorophyll concentration, enzyme activities, and gene transcriptions in inoculated cucumber seedlings. In our study, we observed a positive correlation between antioxidant compounds and the defense-associated enzymes as well as their corresponding gene expressions. Our study underscores the potential of CSEO-LCNPs as an eco-friendly and effective solution for managing cucumber powdery mildew.

Effects of MARDI Nano-Fertilizer Application Frequency on the Growth of Rock Melon

For many years, fertilizers have been utilized in agriculture to increase the fruit yield and quality of various crops, which in turn will increase the nutritive content of products. Recently, MARDI has developed a nano-fertilizer based on nanoemulsions to increase the productivity of rock melon. The development of nanoemulsion-based fertilizer was carried out using the high-energy emulsification method which has significant advantages, such as enhancing the solubilization of active constituents while preserving biological activity. In this work, the effects of the vegetative growth of rock melon on different application frequencies (T1=0, T2=2, T3=4, T4=6, and T5=8 times) of MARDI nano-fertilizer through foliar treatment were studied. The results showed that the vegetative growth of the rock melon including plant height, stem diameter, relative chlorophyll content, and leaf area of rock melon were significantly (p≤0.05) increased by 15.07%, 7.8%, 41.5% and 41.5%, respectively at T3, photosynthetic pigments of Chlorophyll a by 21.1% at T5, Chlorophyll b and carotenoid by 24.99% at T4 treatment. The dry weight biomass did not vary significantly in all treatments but showed an increase in dry biomass over the nano-fertilizers treatment compared to the control. These findings indicate that adding the foliar application of MARDI nano-fertilizer produces optimal growth in rock melon plants.

Yield, quality, and phytochemicals of two strawberry cultivars in response to foliar calcium nanofertilization

Objective: to evaluate the foliar application of Calcium (Ca2+) nanofertilizer on the yield, fruit quality, total phytochemicals and capacity of two strawberry cultivars 'Monterrey' and 'Albion' of Fragaria x annanassa Duch. Design/ Methodology/ Approach: three foliar calcium treatments were established (two commercial foliar fertilizers, one nanofertilizer). The doses used were 2.5, 5 and 7 mEq L-1 and were applied at the stages of beginning of flowering, full flowering, end of flowering, fruit setting and full production. The design of the experiment was randomized blocks in four replicates, each replicate consisted of a 1 m2 area, with 16 plants. An analysis of variance was performed and the Tukey´s test (p≤0.05) was applied for comparison of means. Results: the results indicated that doses of 2.5 mEq L-1 for the 'Monterrey' cultivar and 5 mEq L-1 for the 'Albion' cultivar favored increases in total phenols, total flavonoids, total anthocyanins, antioxidant capacity and higher yields, by obtaining 13 kg m-2 and 12.59 kg m-2 from those cultivars, respectively. Findings/ Conclusions: this indicates that the use of nano-calcium as a foliar fertilizer could be a suitable alternative that helps improving the bioactive compounds and yields of strawberry fruits.