Focal Adhesion Maturation Research Articles

Zyxin Is Involved in Fibroblast Rigidity Sensing and Durotaxis.

Focal adhesions (FAs) are specialized structures that enable cells to sense their extracellular matrix rigidity and transmit these signals to the interior of the cells, bringing about actin cytoskeleton reorganization, FA maturation, and cell migration. It is known that cells migrate towards regions of higher substrate rigidity, a phenomenon known as durotaxis. However, the underlying molecular mechanism of durotaxis and how different proteins in the FA are involved remain unclear. Zyxin is a component of the FA that has been implicated in connecting the actin cytoskeleton to the FA. We have found that knocking down zyxin impaired NIH3T3 fibroblast’s ability to sense and respond to changes in extracellular matrix in terms of their FA sizes, cell traction stress magnitudes and F-actin organization. Cell migration speed of zyxin knockdown fibroblasts was also independent of the underlying substrate rigidity, unlike wild type fibroblasts which migrated fastest at an intermediate substrate rigidity of 14 kPa. Wild type fibroblasts exhibited durotaxis by migrating toward regions of increasing substrate rigidity on polyacrylamide gels with substrate rigidity gradient, while zyxin knockdown fibroblasts did not exhibit durotaxis. Therefore, we propose zyxin as an essential protein that is required for rigidity sensing and durotaxis through modulating FA sizes, cell traction stress and F-actin organization.

Abstract 13476: ROR2 Deficiency is Associated With Endothelial Dysfunction and Reduced Angiogenesis in Pulmonary Arterial Hypertension

Introduction: Pulmonary arterial hypertension (PAH) is characterized by endothelial dysfunction and progressive loss of lung microvessels. Our group has shown that Wnt pathways are critical for pulmonary angiogenesis but the role of the Wnt/planar cell polarity specific receptor ROR2 in lung endothelial angiogenic responses is unknown. Hypothesis: We hypothesized that ROR2 is required for proper angiogenic responses in pulmonary microvascular endothelial cells (PMVECs) and its loss contributes to endothelial dysfunction in PAH. Methods and Results: Analysis of PAH lung tissues demonstrated reduced ROR2 expression within vascular lesions and in explanted PMVECs. ROR2 deficiency was associated with reduced proliferation and tube formation in response to VEGF-A, a major inducer of angiogenesis. We found that ROR2 promotes VEGF receptor 2 activation via direct phosphorylation of cytoplasmic residues (Y1175/Y951) and that restoring ROR2 expression in PAH PMVECs led to improved angiogenic responses. Besides angiogenic sprouting, we found that ROR2 is required for lung endothelial barrier formation by promoting the assembly of mature focal adhesions and adherens junctions through activation of Src and focal adhesion kinase (FAK). Compared to wild-type controls, endothelial-specific ROR2 knockout (ROR2 ECKO) mice demonstrated more severe hemodynamics, small vessel loss, and muscularization in chronic hypoxia. Moreover, ROR2 ECKO demonstrated severe RV dysfunction associated with reduced capillary density. We validated these findings in samples of decompensated RV tissue from PAH patients, monocrotaline, and Sugen-hypoxia rats which also demonstrated a significant reduction of ROR2 expression that correlated with RV capillary loss. Conclusion: ROR2 plays a protective role in the pulmonary and RV circulations and its loss prevents vessel repair in PAH. Targeting ROR2 could promote recovery of small vessel loss and RV adaptation in PAH.

ELTD1 Activation Induces an Endothelial-EMT Transition to a Myofibroblast Phenotype.

ELTD1 is expressed in endothelial and vascular smooth muscle cells and has a role in angiogenesis. It has been classified as an adhesion GPCR, but as yet, no ligand has been identified and its function remains unknown. To establish its role, ELTD1 was overexpressed in endothelial cells. Expression and consequently ligand independent activation of ELTD1 results in endothelial-mesenchymal transistion (EndMT) with a loss of cell-cell contact, formation of stress fibres and mature focal adhesions and an increased expression of smooth muscle actin. The effect was pro-angiogenic, increasing Matrigel network formation and endothelial sprouting. RNA-Seq analysis after the cells had undergone EndMT revealed large increases in chemokines and cytokines involved in regulating immune response. Gene set enrichment analysis of the data identified a number of pathways involved in myofibroblast biology suggesting that the endothelial cells had undergone a type II EMT. This type of EMT is involved in wound repair and is closely associated with inflammation implicating ELTD1 in these processes.

Assessing effectiveness of Komagataeibacter strains for producing surface-microstructured cellulose via guided assembly-based biolithography

In this study, a medical device made of surface microstructured bacterial cellulose was produced using cellulose-producing acetic acid bacteria wild-type strains in combination with guided assembly-based biolithography. The medical device aims at interfering with the cell's focal adhesion establishment and maturation around implantable devices placed in soft tissues by the symmetrical array on its surface. A total of 25 Komagataeibacter strains was evaluated over a three-step selection. In the first step, the ability of strains to produce a suitable bacterial cellulose layer with high production yield was examined, then nine strains, with a uniform and smooth layer of bacterial cellulose, were cultured in a custom-made silicone bioreactor and finally the characteristics of the symmetrical array of topographic features on the surface were analysed. Selected strains showed high inter and intra species variability in bacterial cellulose production. The devices obtained by K2G30, K1G4, DSM 46590 (Komagataeibacter xylinus), K2A8 (Komagataeibacter sp.) and DSM 15973T (Komagataeibacter sucrofermentas) strains were pouched-formed with hexagonal surface pattern required for reducing the formation of fibrotic tissue around devices, once they are implanted in soft tissues. Our findings revealed the effectiveness of the selected Komagataeibacter wild-type strains in producing surface microstructured bacterial cellulose pouches for making biomedical devices.

Effect of Washing Treatment on the Textural Properties and Bioactivity of Silica/Chitosan/TCP Xerogels for Bone Regeneration.

Silica/biopolymer hydrogel-based materials constitute very attractive platforms for various emerging biomedical applications, particularly for bone repair. The incorporation of calcium phosphates in the hybrid network allows for designing implants with interesting biological properties. Here, we introduce a synthesis procedure for obtaining silica–chitosan (CS)–tricalcium phosphate (TCP) xerogels, with CS nominal content varying from 4 to 40 wt.% and 10 to 20 wt.% TCP. Samples were obtained using the sol-gel process assisted with ultrasound probe, and the influence of ethanol or water as washing solvents on surface area, micro- and mesopore volume, and average pore size were examined in order to optimize their textural properties. Three washing solutions with different soaking conditions were tested: 1 or 7 days in absolute ethanol and 30 days in distilled water, resulting in E1, E7, and W30 washing series, respectively. Soaked samples were eventually dried by evaporative drying at air ambient pressure, and the formation of interpenetrated hybrid structures was suggested by Fourier transformed infrared (FTIR) spectroscopy. In addition the impact that both washing solvent and TCP content have on the biodegradation, in vitro bioactivity and osteoconduction of xerogels were explored. It was found that calcium and phosphate-containing ethanol-washed xerogels presented in vitro release of calcium (2–12 mg/L) and silicon ions (~60–75 mg/L) after one week of soaking in phosphate-buffered saline (PBS), as revealed by inductive coupled plasma (ICP) spectroscopy analysis. However, only the release of silicon was detected for water-washed samples. Besides, all the samples exhibited in vitro bioactivity in simulated body fluid (SBF), as well as enhanced in vitro cell growth and also significant focal adhesion development and maturation.

MAGI1, a Scaffold Protein with Tumor Suppressive and Vascular Functions.

MAGI1 is a cytoplasmic scaffolding protein initially identified as a component of cell-to-cell contacts stabilizing cadherin-mediated cell–cell adhesion in epithelial and endothelial cells. Clinical-pathological and experimental evidence indicates that MAGI1 expression is decreased in some inflammatory diseases, and also in several cancers, including hepatocellular carcinoma, colorectal, cervical, breast, brain, and gastric cancers and appears to act as a tumor suppressor, modulating the activity of oncogenic pathways such as the PI3K/AKT and the Wnt/β-catenin pathways. Genomic mutations and other mechanisms such as mechanical stress or inflammation have been described to regulate MAGI1 expression. Intriguingly, in breast and colorectal cancers, MAGI1 expression is induced by non-steroidal anti-inflammatory drugs (NSAIDs), suggesting a role in mediating the tumor suppressive activity of NSAIDs. More recently, MAGI1 was found to localize at mature focal adhesion and to regulate integrin-mediated adhesion and signaling in endothelial cells. Here, we review MAGI1′s role as scaffolding protein, recent developments in the understanding of MAGI1 function as tumor suppressor gene, its role in endothelial cells and its implication in cancer and vascular biology. We also discuss outstanding questions about its regulation and potential translational implications in oncology.

Optoregulated force application to cellular receptors using molecular motors

Progress in our understanding of mechanotransduction events requires noninvasive methods for the manipulation of forces at molecular scale in physiological environments. Inspired by cellular mechanisms for force application (i.e. motor proteins pulling on cytoskeletal fibers), we present a unique molecular machine that can apply forces at cell-matrix and cell-cell junctions using light as an energy source. The key actuator is a light-driven rotatory molecular motor linked to polymer chains, which is intercalated between a membrane receptor and an engineered biointerface. The light-driven actuation of the molecular motor is converted in mechanical twisting of the entangled polymer chains, which will in turn effectively “pull” on engaged cell membrane receptors (e.g., integrins, T cell receptors) within the illuminated area. Applied forces have physiologically-relevant magnitude and occur at time scales within the relevant ranges for mechanotransduction at cell-friendly exposure conditions, as demonstrated in force-dependent focal adhesion maturation and T cell activation experiments. Our results reveal the potential of nanomotors for the manipulation of living cells at the molecular scale and demonstrate a functionality which at the moment cannot be achieved by other technologies for force application.

Mechanical Fingerprint of Senescence in Endothelial Cells.

Endothelial senescence entails alterations of the healthy cell phenotype, which accumulate over time and contribute to cardiovascular disease. Mechanical aspects regulating cell adhesion, force generation, and the response to flow contribute to the senescence-associated drift; however, they remain largely unexplored. Here, we exploit force microscopy to resolve variations of the cell anchoring to the substrate and the tractions generated upon aging in the nanonewton (nN) range. Senescent endothelial cells display a multifold increase in the levels of basal adhesion and force generation supported by mature and strong focal adhesions. The enhanced mechanical interaction with the substrate yields static endothelial monolayers that polarize in response to flow but fail the process of coordinated cell shape remodeling and reorientation. The emerging picture indicates that senescence reinforces the local cell interaction with the substrate and may therefore prevent endothelial denudation; however, it compromises the ability to functionally adapt to the local hemodynamic conditions.

The Combined Influence of Viscoelastic and Adhesive Cues on Fibroblast Spreading and Focal Adhesion Organization.

Tissue fibrosis is characterized by progressive extracellular matrix (ECM) stiffening and loss of viscoelasticity that ultimately impairs organ functionality. Cells bind to the ECM through integrins, where αv integrin engagement in particular has been correlated with fibroblast activation into contractile myofibroblasts that drive fibrosis progression. There is a significant unmet need for in vitro hydrogel systems that deconstruct the complexity of native tissues to better understand the individual and combined effects of stiffness, viscoelasticity, and integrin engagement on fibroblast behavior. We developed hyaluronic acid hydrogels with independently tunable cell-instructive properties (stiffness, viscoelasticity, ligand presentation) to address this challenge. Hydrogels with mechanics matching normal or fibrotic lung tissue were synthesized using a combination of covalent crosslinks and supramolecular interactions to tune viscoelasticity. Cell adhesion was mediated through incorporation of either RGD peptide or engineered fibronectin fragments promoting preferential integrin engagement via αvβ3 or α5β1. On fibrosis-mimicking stiff elastic hydrogels, preferential αvβ3 engagement promoted increased spreading, actin stress fiber organization, and focal adhesion maturation as indicated by paxillin organization in human lung fibroblasts. In contrast, preferential α5β1 binding suppressed these metrics. Viscoelasticity, mimicking the mechanics of healthy tissue, largely curtailed fibroblast spreading and focal adhesion organization independent of adhesive ligand type, highlighting its role in reducing fibroblast-activating behaviors. Together, these results provide new insights into how mechanical and adhesive cues collectively guide disease-relevant cell behaviors. The online version contains supplementary material available at 10.1007/s12195-021-00672-1.

Bone Piezoelectricity-Mimicking Nanocomposite Membranes Enhance Osteogenic Differentiation of Bone Marrow Mesenchymal Stem Cells by Amplifying Cell Adhesion and Actin Cytoskeleton.

Ferroelectric biomaterials have been widely investigated and demonstrated to enhance osteogenesis by simulating the inherent electrical properties of bone tissues. Nevertheless, the underlying biological processes are still not wellunderstood. Hence, this study investigated the underlying biological processes by which bone piezoelectricity-mimicking barium titanate/poly(vinylidene fluoride-trifluoroethylene) nanocomposite membranes (BTO nanocomposite membranes) promote osteogenesis of Bone Marrow Mesenchymal Stem Cells (BMSCs). Ourresults revealed that the piezoelectric coefficient (d33) of nanocomposite membranes aftercontrolled corona poling was similar to that of native bone, and exhibited highly-stable piezoelectrical properties and concentrated surface electrical potential. These nanocomposite membranes significantly enhanced the adhesion and spreading of BMSCs, which was manifested as increased number and area of mature focal adhesions. Furthermore, the nanocomposite membranes significantly promoted the expression of integrin receptors genes (α1, α5 andβ3), which in turn enhanced osteogenesis of BMSCs, as manifested by upregulated Alkaline Phosphatase (ALP) and Bone Morphogenetic Protein 2 (BMP2) expression levels. Further investigations found that the Focal Adhesion Kinase (FAK)-Extracellular Signal-Regulated Kinase1/2 (ERK 1/2) signaling axis may be involved in the biological process of polarized nanocomposite membrane-induced osteogenesis. This study thus provides useful insights for betterunderstanding of the biological processes by which piezoelectric or ferroelectric biomaterials promote osteogenesis.

BAD regulates mammary gland morphogenesis by 4E-BP1-mediated control of localized translation in mouse and human models

Elucidation of non-canonical protein functions can identify novel tissue homeostasis pathways. Herein, we describe a role for the Bcl-2 family member BAD in postnatal mammary gland morphogenesis. In Bad3SA knock-in mice, where BAD cannot undergo phosphorylation at 3 key serine residues, pubertal gland development is delayed due to aberrant tubulogenesis of the ductal epithelium. Proteomic and RPPA analyses identify that BAD regulates focal adhesions and the mRNA translation repressor, 4E-BP1. These results suggest that BAD modulates localized translation that drives focal adhesion maturation and cell motility. Consistent with this, cells within Bad3SA organoids contain unstable protrusions with decreased compartmentalized mRNA translation and focal adhesions, and exhibit reduced cell migration and tubulogenesis. Critically, protrusion stability is rescued by 4E-BP1 depletion. Together our results confirm an unexpected role of BAD in controlling localized translation and cell migration during mammary gland development.

LIMD1 phase separation contributes to cellular mechanics and durotaxis by regulating focal adhesion dynamics in response to force.

Cells sense and respond to extracellular mechanical cues through cell-matrix adhesions. Interestingly, the maturation of focal adhesions (FAs) is reciprocally force dependent. How biomechanical cues dictate the status of cell motility and how FAs spatial temporally coordinate force sensing and self-organization remain enigmatic. Here, we identify that LIMD1, a member of the LIM domain scaffolding proteins, undergoes force-sensitive condensation at the FAs. We also unveil that the multivalent interactions of LIMD1 intrinsically disordered region (IDR) and the LIM domains concertedly drive this phase transition under the regulation of phosphorylation. Intriguingly, formation of condensed LIMD1 protein compartments is sufficient to specifically enrich and localize late FA proteins. We further discover that LIMD1 regulates cell spreading, maintains FA dynamics and cellular contractility, and is critical for durotaxis-the ability of cells to crawl along gradients of substrate stiffness. Our results suggest a model that recruitment of LIMD1 to the FAs, via mechanical force triggered inter-molecular interaction, serves as a phase separation hub to assemble and organize matured FAs, thus allowing for efficient mechano-transduction and cell migration.

Enhanced substrate stress relaxation promotes filopodia-mediated cell migration.

Cell migration on two-dimensional substrates is typically characterized by lamellipodia at the leading edge, mature focal adhesions and spread morphologies. These observations result from adherent cell migration studies on stiff, elastic substrates, because most cells do not migrate on soft, elastic substrates. However, many biological tissues are soft and viscoelastic, exhibiting stress relaxation over time in response to a deformation. Here, we have systematically investigated the impact of substrate stress relaxation on cell migration on soft substrates. We observed that cells migrate minimally on substrates with an elastic modulus of 2 kPa that are elastic or exhibit slow stress relaxation, but migrate robustly on 2-kPa substrates that exhibit fast stress relaxation. Strikingly, migrating cells were not spread out and did not extend lamellipodial protrusions, but were instead rounded, with filopodia protrusions extending at the leading edge, and exhibited small nascent adhesions. Computational models of cell migration based on a motor-clutch framework predict the observed impact of substrate stress relaxation on cell migration and filopodia dynamics. Our findings establish substrate stress relaxation as a key requirement for robust cell migration on soft substrates and uncover a mode of two-dimensional cell migration marked by round morphologies, filopodia protrusions and weak adhesions.

Cell Adhesion-Mediated Piezoelectric Self-Stimulation on Polydopamine-Modified Poly(vinylidene fluoride) Membranes.

Cell adhesion-mediated piezoelectric stimulation provides a noninvasive method for in situ electrical regulation of cell behavior, offering new opportunities for the design of smart materials for tissue engineering and bioelectronic medicines. In particular, the surface potential is mainly dominated by the inherent piezoelectricity of the biomaterial and the dynamic adhesion state of cells. The development of an efficient and optimized material interface would have important implications in cell regulation. Herein, we modified the surface of poled poly(vinylidene fluoride) (PVDF) membranes through polymerization of dopamine and investigated their influence on cell adhesion and electromechanical self-stimulation. Our results demonstrated that mesenchymal stem cells seeded on the poled PVDF membrane exhibited stronger cell spreading and adhesion. Meanwhile, the surface modification through polydopamine significantly improved the hydrophilicity of the samples and contributed to the formation of cell actin bundles and maturation of focal adhesions, which further positively modulated cell piezoelectric self-stimulation and induced intracellular calcium transients. Combining with theoretical simulations, we found that the self-stimulation was enhanced mainly due to the increase of the adhesion site and adhesion force magnitude. These findings provide new insights for probing the cell regulation mechanism on piezoelectric substrates, offering more opportunities for the rational design of piezoelectric biomaterial interfaces for biomedical engineering.

Altered regulation of cell migration in IRF6-mutated orofacial cleft patients-derived primary cells reveals a novel role of Rho GTPases in cleft/lip palate development.

Orofacial clefts are the most common congenital craniofacial birth defects. They occur from a failure in cell proliferation and fusion of neural crest cells of the lip buds and/or palatal shelves. In this study, we investigate the genetic basis and molecular mechanisms in primary cells derived from a cleft and lip palate patient presenting van der Woude syndrome (VWS). Since mutations in the integrin genes are widely correlated with VWS, Interferon Regulatory Factor 6 (IRF6) screening was conducted in a cohort of 200 participants presenting with orofacial anomalies. Primary fibroblastic cells derived from the upper right gingiva and palatal regions were isolated and two cellular populations from two participants were obtained: a control with no cleft phenotype and a patient with a cleft phenotype typical of van der Woude syndrome (VWS). IRF6 targeted sequencing revealed mutations in two distinct families. Our results showed no alteration in the viability of the CLP/VWS patient cells, suggesting the phenotype associate with the disease is not secondary to a defect in cell proliferation. We did however detect a significant decrease in the migratory ability of the CLP with Van der Woude syndrome (CLP/VWS) patient cells, which could account for the phenotype. When compared to normal cells, patient cells showed a lack of polarization, which would account for their lack of mobility. Patient cells showed protrusions all around the cells and a lack of defined leading edge. This was reflected with actin staining, WAVE2 and Arp2 around the cell, and correlated with an increase in Rac1 activation. Consistently with the increase in Rac1 activation, patient cells showed a loss in the maturation of focal adhesions needed for contractility, which also accounts for the lack in cell migration. Our findings give increased understanding of the molecular mechanisms of VWS and expands the knowledge of van der Woude syndrome (VWS) occurrence by providing a strong molecular evidence that CLP with Van der Woude syndrome (CLP/VWS) phenotype is caused by a defect in normal physiological processes of cells.

Hydroxyapatite Particle Density Regulates Osteoblastic Differentiation Through β-Catenin Translocation.

Substrate surface characteristics such as roughness, wettability and particle density are well-known contributors of a substrate's overall osteogenic potential. These characteristics are known to regulate cell mechanics as well as induce changes in cell stiffness, cell adhesions, and cytoskeletal structure. Pro-osteogenic particles, such as hydroxyapatite, are often incorporated into a substrate to enhance the substrates osteogenic potential. However, it is unknown which substrate characteristic is the key regulator of osteogenesis. This is partly due to the lack of understanding of how these substrate surface characteristics are transduced by cells. In this study substrates composed of polycaprolactone (PCL) and carbonated hydroxyapatite particles (HAp) were synthesized. HAp concentration was varied, and a range of surface characteristics created. The effect of each substrate characteristic on osteoblastic differentiation was then examined. We found that, of the characteristics examined, only HAp density, and indeed a specific density (85 particles/cm2), significantly increased osteoblastic differentiation. Further, an increase in focal adhesion maturation and turnover was observed in cells cultured on this substrate. Moreover, β-catenin translocation from the membrane bound cell fraction to the nucleus was more rapid in cells on the 85 particle/cm2 substrate compared to cells on tissue culture polystyrene. Together, these data suggest that particle density is one pivotal factor in determining a substrates overall osteogenic potential. Additionally, the observed increase in osteoblastic differentiation is a at least partly the result of β-catenin translocation and transcriptional activity suggesting a β-catenin mediated mechanism by which substrate surface characteristics are transduced.

MAGI1 localizes to mature focal adhesion and modulates endothelial cell adhesion, migration and angiogenesis

ABSTRACT MAGI1 is an intracellular adaptor protein that stabilizes cell junctions and regulates epithelial and endothelial integrity. Here, we report that that in endothelial cells MAGI1 colocalizes with paxillin, β3-integrin, talin 1, tensin 3 and α-4-actinin at mature focal adhesions and actin stress fibers, and regulates their dynamics. Downregulation of MAGI1 reduces focal adhesion formation and maturation, cell spreading, actin stress fiber formation and RhoA/Rac1 activation. MAGI1 silencing increases phosphorylation of paxillin at Y118, an indicator of focal adhesion turnover. MAGI1 promotes integrin-dependent endothelial cells adhesion to ECM, reduces invasion and tubulogenesisin vitro and suppresses angiogenesis in vivo. Our results identify MAGI1 as anovel component of focal adhesions, and regulator of focal adhesion dynamics, cell adhesion, invasion and angiogenesis.

Recent Advances and Prospects in the Research of Nascent Adhesions.

Nascent adhesions are submicron transient structures promoting the early adhesion of cells to the extracellular matrix. Nascent adhesions typically consist of several tens of integrins, and serve as platforms for the recruitment and activation of proteins to build mature focal adhesions. They are also associated with early stage signaling and the mechanoresponse. Despite their crucial role in sampling the local extracellular matrix, very little is known about the mechanism of their formation. Consequently, there is a strong scientific activity focused on elucidating the physical and biochemical foundation of their development and function. Precisely the results of this effort will be summarized in this article.

Tissue distribution and subcellular localization of the family of Kidney Ankyrin Repeat Domain (KANK) proteins

Kidney Ankyrin Repeat-containing Proteins (KANKs) comprise a family of four evolutionary conserved proteins (KANK1 to 4) that localize to the belt of mature focal adhesions (FAs) where they regulate integrin-mediated adhesion, actomyosin contractility, and link FAs to the cortical microtubule stabilization complex (CMSC). The human KANK proteins were first identified in kidney and have been associated with kidney cancer and nephrotic syndrome. Here, we report the distributions and subcellular localizations of the four Kank mRNAs and proteins in mouse tissues. We found that the KANK family members display distinct and rarely overlapping expression patterns. Whereas KANK1 is expressed at the basal side of epithelial cells of all tissues tested, KANK2 expression is mainly observed at the plasma membrane and/or cytoplasm of mesenchymal cells and KANK3 exclusively in vascular and lymphatic endothelial cells. KANK4 shows the least widespread expression pattern and when present, overlaps with KANK2 in contractile cells, such as smooth muscle cells and pericytes. Our findings show that KANKs are widely expressed in a cell type-specific manner, which suggests that they have cell- and tissue-specific functions.

Substrate Resistance to Traction Forces Controls Fibroblast Polarization

The mechanics of fibronectin-rich extracellular matrix regulate cell physiology in a number of diseases, prompting efforts to elucidate cell mechanosensing mechanisms at the molecular and cellular scale. Here, the use of fibronectin-functionalized silicone elastomers that exhibit considerable frequency dependence in viscoelastic properties unveiled the presence of two cellular processes that respond discreetly to substrate mechanical properties. Weakly cross-linked elastomers supported efficient focal adhesion maturation and fibroblast spreading because of an apparent stiff surface layer. However, they did not enable cytoskeletal and fibroblast polarization; elastomers with high cross-linking and low deformability were required for polarization. Our results suggest as an underlying reason for this behavior the inability of soft elastomer substrates to resist traction forces rather than a lack of sufficient traction force generation. Accordingly, mild inhibition of actomyosin contractility rescued fibroblast polarization even on the softer elastomers. Our findings demonstrate differential dependence of substrate physical properties on distinct mechanosensitive processes and provide a premise to reconcile previously proposed local and global models of cell mechanosensing.