Ion Flux Research Articles

Sn Penetrated Zincophilic Interface Design in Porous Zn Substrate for High Performance Zn‐Ion Battery

AbstractRechargeable zinc‐ion batteries are considered an ideal energy storage system due to their low cost and nonflammable aqueous electrolyte. However, dendrite growth, hydrogen evolution reaction, and self‐corrosion of zinc anode brought about serious safety risks including short circuits and electrode expansion. Therefore, a modified host‐design strategy with a 3D porous structure and bulk‐phase penetrated zincophilic interface is proposed to boost the stability and lifetime of the Zn anode. The porous Zn substrate is constructed by universal HCl etching and the uniform and tight Sn‐penetrated zincophilic interface is formed by effective electron beam evaporation (EBE). The porous substrate can uniform zinc ion flux and the Sn coating could effectively improve zinc ion deposition behavior, thus inhibiting the risk of dendrites growth and side reaction. As a result, the 3D Zn substrate with Sn interface (3D Zn@Sn) exhibits prolonged galvanostatic cycling performance up to 4500 h with a low polarization of ≈25 mV (1 mA cm−2, 1 mAh cm−2) in the symmetric cell. The full cell assembled with KVOH@Ti could maintain a high specific capacity of 148.6 mAh g−1 after 500 galvanostatic cycles (10 A g−1). This work proposed an improved electrode design to realize the high performance of zinc ion batteries.

Thermophysical Insights into the Anti-Inflammatory Potential of Magnetic Fields

Background: Inflammation is caused by an excess of Sodium ions inside the cell. This generates a variation in the cell’s membrane electric potential, becoming a steady state from a thermodynamic viewpoint. Methods: This paper introduces a thermodynamic approach to inflammation based on the fundamental role of the electric potential of the cell membrane, introducing an analysis of the effect of heat transfer related to the inflammation condition. Results: The direct proportionality between the reduction in temperature and the increase of Na+ outflow may ameliorate the inflammation cascade. Conclusions: Based on these ion fluxes, we suggest the consideration of a ‘companion’ electromagnetic therapeutic wave concept in support of the present anti-inflammatory treatment.

Simultaneous Removal of Strontium, Manganese, Lead and Arsenate from Wastewaters Using a Green and Low-Cost Adsorbent Derived from Nut Residues

The potential of a nut residue, activated only by physical means, to simultaneously adsorb Sr2+, Mn2+, Pb2+ and As5+ from contaminated waters was investigated. Mono-metal and multi-metal adsorption behavior and adsorption capacities by the solid material were compared for a range of initial metals concentrations, adsorbent dose, contact time and solution pH. The mechanisms of adsorption were examined by conducting structural, mineralogical and chemical analyses and applying two isotherm models to simulate experimental data. In the case of mono-metal adsorption, the maximum uptake of Sr2+ by the biochar was 12.3, of Mn2+ 23.8, of Pb2+ 24.7 and of As5+ 12.4 mg/g. In the case of multi-metal adsorption, the uptake of each metal was enhanced as the total ion flux density increased, revealing that there was no competition between these ions for biochar’s sorption sites. For an adsorbent dose of 2 g/L, the maximum adsorption capacity of biochar for Sr2+, Mn2+, Pb2+ and As5+ could be raised up to 47.6, 49.9, 25 and 48.7 mg/g, respectively. Potential adsorption mechanisms were chemical complexation or electron coordination between the metals and the biochar matrix, as well as mineral precipitation on the adsorbent surface.

TMEM206 Contributes to Cancer Hallmark Functions in Colorectal Cancer Cells and Is Regulated by p53 in a p21-Dependent Manner

Acid-induced ion flux plays a role in pathologies where tissue acidification is prevalent, including cancer. In 2019, TMEM206 was identified as the molecular component of acid-induced chloride flux. Localizing to the plasma membrane, TMEM206 contributes to cellular processes like acid-induced cell death. Since over 50% of human cancers carry loss of function mutations in the p53 gene, we aimed to analyze how TMEM206 is regulated by p53 and its role in cancer hallmark function and acid-induced cell death in HCT116 colorectal cancer (CRC) cells. We generated p53-deficient HCT116 cells and assessed TMEM206-mediated Cl− currents and transcriptional regulation using the patch-clamp and a dual-luciferase reporter assay, respectively. To investigate the contribution of TMEM206 to cancer hallmark functions, we performed migration and metabolic activity assays. The role of TMEM206 in p53-mediated acid-induced cell death was assessed with cell death assays. The TMEM206 mRNA level was significantly elevated in human primary CRC tumors. TMEM206 knockout increased acid-induced cell death and reduced proliferation and migration, indicating a role for TMEM206 in these cancer hallmark functions. Furthermore, we observed increased TMEM206 mRNA levels and currents in HCT116 p53 knockout cells. This phenotype can be rescued by transient overexpression of p53 but not by overexpression of dysfunctional p53. In addition, our data suggest that TMEM206 may mediate cancer hallmark functions within p53-associated pathways. TMEM206 promoter activity is not altered by p53 overexpression. Conversely, knockout of p21, a major target gene of p53, increased TMEM206-mediated currents, suggesting expression control of TMEM206 by p21 downstream signaling. Our results show that in colorectal cancer cells, TMEM206 expression is elevated, contributes to cancer hallmark functions, and its regulation is dependent on p53 through a p21-dependent mechanism.

Electron temperature and ion density distribution on a vertical section in a weakly magnetized inductively coupled plasma

In this study, the distributions of electron temperature and ion density on a vertical section in a weakly magnetized inductively coupled plasma were measured using radially movable floating probes placed at different axial positions. The chamber used in this experiment included two cylindrical parts: a smaller radius top part with a planar antenna on the top quartz window and a larger radius downstream part. A magnet coil around the chamber top part maintained a divergent magnetic field in the discharge region. As the current in the magnet coil increased, the magnetic field also increased. Due to the variations of the radio frequency electric field in the plasma, the increase in electron temperature can be divided into different stages. At the higher magnetic field, the electric field of the electrostatic wave can increase electron temperature at the chamber center axial. Also, since the electron cyclotron resonance (ECR) heating in the chamber downstream part changed with the magnetic field, the maximum ion density was observed when the magnetic field around the bias electrode was slightly larger than the ECR magnetic condition. The reasons for these variations were verified in the plasma numerical simulations. The ion flux distribution measured on the bias electrode can change from a center-high distribution to an M-shape distribution with the increased magnetic field.

Cytosolic alkalinization in guard cells: an intriguing but interesting event during stomatal closure that merits further validation of its importance

Stomatal closure is essential to conserve water and prevent microbial entry into leaves. Alkalinization of guard cells is common during closure by factors such as abscisic acid, methyl jasmonate, and even darkness. Despite reports pointing at the role of cytosolic pH, there have been doubts about whether the guard cell pH change is a cause for stomatal closure or an associated event, as changes in membrane potential or ion flux can modulate the pH. However, the importance of cytosolic alkalinization is strongly supported by the ability of externally added weak acids to restrict stomatal closure. Using genetically encoded pH sensors has confirmed the rise in pH to precede the elevation of Ca2+ levels. Yet some reports claim that the rise in pH follows the increase in ROS or Ca2+. We propose a feedback interaction among the rise in pH or ROS or Ca2+ to explain the contrasting opinions on the positioning of pH rise. Stomatal closure and guard cell pH changes are compromised in mutants deficient in vacuolar H+-ATPase (V-ATPase), indicating the importance of V-ATPase in promoting stomatal closure. Thus, cytosolic pH change in guard cells can be related to the rise in ROS and Ca2+, leading to stomatal closure. We emphasize that cytosolic pH in stomatal guard cells deserves further attention and evaluation.

Functional Separator with Poly(Acrylic Acid)-Enabled Li2CO3-Free Garnet Coating for Long-Cycling Lithium Metal Batteries.

Lithium metal batteries (LMBs) possess a theoretical energy density far surpassing that of commercial lithium-ion batteries (LIBs), positioning them as one of the most promising next-generation energy storage systems. Modifying separators with composite coatings comprising oxide solid-state electrolyte (SSE) particles and polymers can improve the cycling stability and safety of LMBs. However, exposure to air forms Li2CO3 on oxide SSE particles, diminishing their ion flux regulation at the electrode/electrolyte interface. Utilizing the reaction of Li2CO3 with polyacrylic acid (PAA) to form lithium polyacrylate (LiPAA), an ultra-thin composite coating on polyethylene (PE) separator with Li2CO3-free Li6.4La3Zr1.4Ta0.6O12 (LLZTO) particles and LiPAA binder is fabricated in one step. The exposed Li2CO3-free LLZTO surface increases the ionic conductivity and lithium ion (Li+) transference number of the functional separator, resulting in small resistance and uniform Li deposition of the Li metal anode. Consequently, the Li//LiCoO2 cell with the functional separator exhibits a significantly improved life of 980 cycles with 80.9% capacity retention under lean-electrolyte conditions. Both the Li//LiCoO2 coin cell and pouch cell using thin Li foil anode demonstrate good cycling stability and high mechanical robustness. This study provides a green and scalable approach for fabricating advanced separators for LMBs.

A genetically encoded actuator boosts L-type calcium channel function in diverse physiological settings.

L-type Ca2+ channels (CaV1.2/1.3) convey influx of calcium ions that orchestrate a bevy of biological responses including muscle contraction, neuronal function, and gene transcription. Deficits in CaV1 function play a vital role in cardiac and neurodevelopmental disorders. Here, we develop a genetically encoded enhancer of CaV1.2/1.3 channels (GeeCL) to manipulate Ca2+ entry in distinct physiological settings. We functionalized a nanobody that targets the CaV complex by attaching a minimal effector domain from an endogenous CaV modulator-leucine-rich repeat containing protein 10 (Lrrc10). In cardiomyocytes, GeeCL selectively increased L-type current amplitude. In neurons in vitro and in vivo, GeeCL augmented excitation-transcription (E-T) coupling. In all, GeeCL represents a powerful strategy to boost CaV1.2/1.3 function and lays the groundwork to illuminate insights on neuronal and cardiac physiology and disease.

Microstructure evolution of CdZnTe crystals irradiated by heavy ions

Consideration of irradiation effects is important for in-orbit operation and radiation protection in aerospace applications. The configuration of irradiation defects and their impact on deteriorating the carrier transport properties of CZT crystals need to be clarified. In this study, the microdefect evolution mechanism of CdZnTe (CZT) crystals under 10 MeV Chlorine (Cl) ion irradiation at flux of 1×1010∼1×1012 n·cm-2 are investigated. The stacking faults first appear in the CZT crystal at 4.5×10-4 displacement per atom (dpa), which are categorized into slip-type, gap-type and vacancy-type. In order to hinder the further expansion of stacking fault, S-shaped stacking fault dipole appears. When the dpa reaches 4.5×10-2, the local phase transition occurs in the damage zone to form CuPt-A ordered phase with ZnTe/CdTe periodic arrangement because the fluctuation in local composition and strain caused by cascade collisions. The deterioration of electric field distribution and charge collection caused by irradiation damage layer leads to the decrease of γ-ray detection ability. The energy resolution (ER) of the CZT detector for γ-ray can be maintained at 30.6% when the ion flux accumulates to 1×1012 n·cm-2, revealing high irradiation hardness. Consequently, these findings provide a theoretical basis for the radiation damage recovery of CZT detectors, further demonstrating that CZT crystals are the most competitive new generation of room-temperature nuclear radiation detection materials, and can provide radiation protection strategies for similar compound semiconductor materials.

High-viscoelasticity alginate-based coatings for reversible zinc metal anodes

High-safety aqueous zinc (Zn) ion batteries are troubled by dendrite growth and hydrogen evolution reaction on Zn anode, which can be well solved via the construction of surface protective layer. The recent researches mainly focus on the bulk property of the protective layer, but its separation from Zn anode is ignored. In this work, high-viscoelasticity alginate-based (HVAA) layer was in-situ constructed on Zn anodes by the cross-linking of sodium alginate with formaldehyde and the plastifying of glycerin. HVAA layer can combine with H2O and coordinate with Zn2+ ions in aqueous electrolyte to achieve viscoelasticity on Zn anode, which can accommodate volume change of Zn anode during plating/stripping processes to continuously protect Zn anodes under the real battery system. Physical block effect of HVAA layer impedes hydrogen evolution corrosion reaction by avoiding the immediate contact of Zn anodes with aqueous electrolyte. Ionic conductive ability of HVAA layer by coordinating oxygen-containing groups with Zn2+ can uniform ion flux to induce the homogeneous deposition of Zn2+ on Zn anode. Zn anode with HVAA endows ZnZn symmetric battery with stably cycle of 4000 h and Zn-iodide full batteries with better electrochemical performance of 8000 cycles comparing with bare Zn anode. This work opens a novel route to continuously protect Zn anode through the high-viscoelasticity films to closely fit with Zn surface and implement the high-value application of renewable sources.

Zincophilic Sites Enriched Hydrogen‐Bonded Organic Framework as Multifunctional Regulating Interfacial Layers for Stable Zinc Metal Batteries

AbstractTo construct an efficient regulating layer for Zn anodes that can simultaneously address the issues of dendritic growth and side reactions is highly demanded for stable zinc metal batteries (ZMBs). Herein, we fabricate a hydrogen‐bonded organic framework (HOF) enriched with zincophilic sites as a multifunctional layer to regulate Zn anodes with controlled spatial ion flux and stable interfacial chemistry (MA‐BTA@Zn). The framework with abundant H‐bonds helps capture H2O and remove the solvated shells on [Zn(H2O)6]2+, leading to suppressed side reactions. The HOF layer also helps form electrolyte‐philic surfaces and expose Zn (002) crystal planes which benefit for rapid conduction and uniform deposition of Zn2+, and weakened sides reactions. Additionally, the electrochemically active zincophilic sites (C=O, −NH2 and triazine groups) favor the targeted guidance and penetration of Zn2+ and provide advantageous sites for uniform Zn deposition. High Young's modulus of the HOF layer further contributes to a high interfacial flexibility and stability against Zn plating‐associated stress. The MA‐BTA@Zn symmetric cells thereby obtain a substantially extended battery life over 1000 h at 4 mA cm−2. The MA‐BTA@Zn||Cu half‐cell demonstrates a highly reversible Zn stripping/plating process over 1500 cycles with impressive average Coulombic efficiency (CE) of 99.5 % at 10 mA cm−2.

A synthetic method to assay polycystin channel biophysics.

Ion channels are biological transistors that control ionic flux across cell membranes to regulate electrical transmission and signal transduction. They are found in all biological membranes and their conductive state kinetics are frequently disrupted in human diseases. Organelle ion channels are among the most resistant to functional and pharmacological interrogation. Traditional channel protein reconstitution methods rely upon exogenous expression and/or purification from endogenous cellular sources which are frequently contaminated by resident ionophores. Here, we describe a fully synthetic method to assay functional properties of polycystin channels that natively traffic to primary cilia and endoplasmic reticulum organelles. Using this method, we characterize their oligomeric assembly, membrane integration, orientation, and conductance while comparing these results to their endogenous channel properties. Outcomes define a novel synthetic approach that can be applied broadly to investigate channels resistant to biophysical analysis and pharmacological characterization.

Understanding and Mastering Multiphysical Fields Toward Dendrite‐Free Aqueous Zinc Batteries

AbstractAqueous zinc batteries (AZBs) have emerged as promising candidates for next‐generation grid‐scale energy storage due to their excellent safety, environmental friendliness, and abundance of Zn metal. However, undesired dendrite growth on Zn anodes, resulting from uneven Zn plating/stripping, leads to poor durability and low Coulombic efficiency, posing significant challenges for the practical application of AZBs. Multiple physical fields, the intrinsic driving force governing the distribution of electrons and ions, significantly impact Zn deposition behavior. The underlying mechanisms and regulation strategies related to this phenomenon has not been fully reviewed. This comprehensive review focuses on revealing the key physical fields influencing Zn deposition (including ionic flux, electric field, stress field, and temperature field) and summarizes the most effective control methods. Each approach is thoroughly scrutinized, highlighting its operational mechanisms, benefits, and limitations. Furthermore, the challenges and potential pathways for developing durable Zn anodes are outlined. Through in‐depth analysis of the influences of multiphysical fields on Zn deposition behavior, this review sets the foundation for enhancing the performance of Zn anodes, thereby supporting the advancement of Zn batteries commercialization.

A synthetic method to assay polycystin channel biophysics

Ion channels are biological transistors that control ionic flux across cell membranes to regulate electrical transmission and signal transduction. They are found in all biological membranes and their conductive state kinetics are frequently disrupted in human diseases. Organelle ion channels are among the most resistant to functional and pharmacological interrogation. Traditional channel protein reconstitution methods rely upon exogenous expression and/or purification from endogenous cellular sources which are frequently contaminated by resident ionophores. Here, we describe a fully synthetic method to assay functional properties of polycystin channels that natively traffic to primary cilia and endoplasmic reticulum organelles. Using this method, we characterize their oligomeric assembly, membrane integration, orientation, and conductance while comparing these results to their endogenous channel properties. Outcomes define a novel synthetic approach that can be applied broadly to investigate channels resistant to biophysical analysis and pharmacological characterization.

Piezo1-Mediated Mechanotransduction Contributes to Disturbed Flow-Induced Atherosclerotic Endothelial Inflammation.

Disturbed flow generates oscillatory shear stress (OSS), which in turn leads to endothelial inflammation and atherosclerosis. Piezo1, a biomechanical force sensor, plays a crucial role in the cardiovascular system. However, the specific role of Piezo1 in atherosclerosis remains to be fully elucidated. We detected the expression of Piezo1 in atherosclerotic mice and endothelial cells from regions with disturbed blood flow. The pharmacological inhibitor Piezo1 inhibitor (GsMTx4) was used to evaluate the impact of Piezo1 on plaque progression and endothelial inflammation. We examined Piezo1's direct response to OSS invitro and its effects on endothelial inflammation. Furthermore, mechanistic studies were conducted to explore the potential molecular cascade through which Piezo1 mediates endothelial inflammation in response to OSS. Our findings revealed the upregulation of Piezo1 in apoE-/- (apolipoprotein E) atherosclerotic mice, which is associated with disturbed flow. Treatment with GsMTx4 not only delayed plaque progression but also mitigated endothelial inflammation in both chronic and disturbed flow-induced atherosclerosis. Piezo1 was shown to facilitate calcium ions (Ca2+)influx in response to OSS, thereby activating endothelial inflammation. This inflammatory response was attenuated in the absence of Piezo1. Additionally, we identified that under OSS, Piezo1 activates the Ca2+/CaM/CaMKII (calmodulin/calmodulin-dependent protein kinases Ⅱ) pathways, which subsequently stimulate downstream kinases FAK (focal adhesion kinase) and Src. This leads to the activation of the OSS-sensitive YAP (yes-associated protein), ultimately triggering endothelial inflammation. Our study highlights the key role of Piezo1 in atherosclerotic endothelial inflammation, proposing the Piezo1-Ca2+/CaM/CaMKII-FAK/Src-YAP axis as a previously unknown endothelial mechanotransduction pathway. Piezo1 is expected to become a potential therapeutic target for atherosclerosis and cardiovascular diseases.

Magnetically oriented nanosheet interlayer for dynamic regeneration in lithium metal batteries

Lithium (Li) metal has been recognized as a promising anode to advance the energy density of current Li-based batteries. However, the growth of the solid-electrolyte interphase (SEI) layer and dendritic Li microstructure pose significant challenges for the long-term operation of Li metal batteries (LMBs). Herein, we propose the utilization of a suspension electrolyte with dispersed magnetically responsive nanosheets whose orientation can be manipulated by an external magnetic field during cell operation for realizing in situ regeneration in LMBs. The regeneration mechanism arises from the redistribution of the ion flux and the formation of an inorganic-rich SEI for uniform and compact Li deposition. With the magnetic-field-induced regeneration process, we show that a Li||Li symmetric cell stably operates for 350 h at 2 mA cm-2 and 2 mA h cm-2, ~5 times that of the cell with the pristine electrolyte. Furthermore, the cycling stability can be significantly extended in the Li||NMC full cell of 3 mA h cm-2, showing a capacity retention of 67% after 500 cycles at 1C. The dynamic Li metal regeneration demonstrated here could bring useful design considerations for reviving the operating cells for achieving high-energy, long-duration battery systems.

Plasma Etch of IGZO Thin Film and IGZO/SiO2 Interface Diffusion in Inductively Coupled CH4/Ar Plasmas

ABSTRACTIn this work, the etching characteristics of InGaZnO4 (IGZO) thin films were systemically investigated in inductively coupled CH4/Ar plasmas with various gas ratios, bias voltages, and surface temperatures. The ion flux in the CH4/Ar plasmas was analyzed using bias power and voltage, whereas the relative densities of CH and H radicals were quantified through optical actinometry. The change in CH3 radical density was also estimated based on plasma kinetics analysis. The correlations between the plasma properties and IGZO etch rate were investigated. In CH4/Ar plasmas with CH4 ratios below 80%, the IGZO etch rate increases with a higher CH4 proportion, aligning with the ascending trend of CH3 radical density, which suggests that CH3 radical density acts as a limiting factor (radical‐limited regime). However, the IGZO etch rate decreases when the CH4 ratio exceeds 80%, corresponding to the reduction in ion flux, which indicates that ion flux becomes a limiting factor in this ion‐limited regime. The IGZO etch rate shows a linear relationship with bias voltage and follows the Arrhenius equation with varying surface temperature in plasmas without bias voltage. A spontaneous etch model was proposed based on these relationships. In this model, the IGZO etch rate depends on CH3 radical density and IGZO surface reactivity, where ion bombardment contributes more significantly to surface reactivity than high surface temperature. IGZO thin film was deposited on SiO2 during the fabrication of a 3D stacked ferroelectric field‐effect transistor (FeFET) memory device. The interaction between IGZO and SiO2 during CH4/Ar plasma processing was investigated using time‐of‐flight secondary ion mass spectrometry. The efficacy of removing IGZO atoms that had diffused into the SiO2 network was enhanced when subjected to plasma with a bias voltage, compared to the process without a bias voltage. However, exposure to CH4/Ar plasma resulted in a deeper diffusion of IGZO atoms into the SiO2 network, primarily attributed to ion bombardment rather than elevated surface temperature. A significant improvement in surface smoothness was achieved after IGZO and SiO2 etch by introducing BCl3 into the SiO2 etching chemistry.

Finite Element Analysis of Local pH Variations in Electrolysis with Porous Electrodes, Considering Water Self-Ionization.

A finite element model was developed to simulate ion fluxes and local pH changes within and around porous electrodes during the H2 evolution reaction (HER) in acidic electrolytes. This model is particularly characterized by its ability to simulate scenarios in which the local pH inside and near the cathode exceeds 7, even under bulk acidic conditions (e.g., pH = 1), by considering the self-ionization of water. Steady-state calculations using meshes with an appropriate spatial distribution inside and near the cathode revealed that the relationship between the local pH and the double-layer potential at the interface between the porous catalyst layer and the electrolyte domains changed notably when the local pH exceeded the threshold of 7. By comparing the fluxes of H+ and OH- ions at the interface and using the thickness of the catalyst layer as a variable, we determined that the presence of H+ ions within the pores or the supply of OH- ions from the pores to the interface was responsible for the characteristic change in the local pH observed for the porous electrode. The porous electrode model constructed in this study can potentially serve as a basis that can be extended to a wide range of electrolysis systems, including not only the HER, but also the reduction of CO2, H2O2, and O2, and even oxidation reactions such as the O2 evolution reaction.

Toward a Circular Lithium Economy with Electrodialysis: Upcycling Spent Battery Leachates with Selective and Bipolar Ion-Exchange Membranes.

Recycling spent lithium-ion batteries offers a sustainable solution to reduce ecological degradation from mining and mitigate raw material shortages and price volatility. This study investigates using electrodialysis with selective and bipolar ion-exchange membranes to establish a circular economy for lithium-ion batteries. An experimental data set of over 1700 ion concentration measurements across five current densities, two solution compositions, and three pH levels supports the techno-economic analysis. Selective electrodialysis (SED) isolates lithium ions from battery leachates, yielding a 99% Li-pure retentate with 68.8% lithium retention, achieving relative ionic fluxes up to 2.41 for Li+ over transition metal cations and a selectivity of 5.64 over monovalent cations. Bipolar membrane electrodialysis (BMED) converts LiCl into high-purity LiOH and HCl, essential for battery remanufacturing and reducing acid consumption via acid recycling. High current densities reduce ion leakage, achieving lithium leakage as low as 0.03%, though hydronium and hydroxide leakage in BMED remains high at 11-20%. Our analysis projects LiOH production costs between USD 1.1 and 3.6 per kilogram, significantly lower than current prices. Optimal SED and BMED conditions are identified, emphasizing the need to control proton transport in BMED and improve cobalt-lithium separation in SED to enhance cost efficiency.

Transition metals and oxidation reactions trigger stargate opening during the initial stages of the replicative cycle of the giant Tupanvirus.

Tupanviruses, members of the family Mimiviridae, infect phagocytic cells. Particle uncoating begins inside the phagosome, with capsid opening via the stargate. The mechanism through which this opening takes place is unknown. Once phagocytized, metal ion flux control and ROS are induced to inactivate foreign particles, including viruses. Here, we studied the effect of iron ions, copper ions, and H2O2 on Tupanvirus particles. Such treatments induced stargate opening in vitro, as observed by different microscopy techniques. Metal-treated viruses were found to be non-infectious, leading to the hypothesis that stargate opening likely resulted in the release of the viral seed, which is required for infection initiation. To the best of our knowledge, this is the first description of a giant virus capsid morphological change induced by transition metals and H2O2, which may be important to describe new virulence factors and capsid uncoating mechanisms.